--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-2-686: EXT3-fs error on sata SiI 3114 controller
- From: Paolo Sala <piviul@riminilug.it>
- Date: Mon, 18 Jan 2010 22:22:57 +0100
- Message-id: <20100118212257.5441.5408.reportbug@serverdati.miciorossino>
Package: linux-image-2.6.26-2-686
Version: 2.6.26-19lenny2
Severity: important
I have created a raid 1 software from 2 sata disk attacched to a
sata SiI 3114 controller. Very often reading or writing to the disk I get a
lot of errors like :
[ 1864.024357] EXT3-fs error (device md1): ext3_valid_block_bitmap:
Invalid block bitmap - block_group = 545, block = 17858561
The disks are ok and googling I've found other users having the same
problem.
Have you any advice to suggest me to solve the problem?
Piviul
-- Package-specific info:
** Version:
Linux version 2.6.26-2-686 (Debian 2.6.26-19lenny2) (dannf@debian.org) (gcc version 4.1.3 20080704 (prerelease) (Debian 4.1.2-25)) #1 SMP Wed Nov 4 20:45:37 UTC 2009
** Command line:
root=/dev/hda1 ro quiet
** Not tainted
** Kernel log:
[ 46.389052] NFSD: starting 90-second grace period
[ 388.688742] md: bind<sda1>
[ 388.696800] md: bind<sdb1>
[ 388.697597] md: md0: raid array is not clean -- starting background reconstruction
[ 388.894611] raid1: raid set md0 active with 2 out of 2 mirrors
[ 459.573801] md: resync of RAID array md0
[ 459.573827] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 459.573838] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 459.573856] md: using 128k window, over a total of 530048 blocks.
[ 476.107508] kjournald starting. Commit interval 5 seconds
[ 476.109101] EXT3 FS on md0, internal journal
[ 476.109133] EXT3-fs: mounted filesystem with ordered data mode.
[ 479.297366] md: md0: resync done.
[ 479.361620] RAID1 conf printout:
[ 479.361620] --- wd:2 rd:2
[ 479.361620] disk 0, wo:0, o:1, dev:sda1
[ 479.361620] disk 1, wo:0, o:1, dev:sdb1
[ 983.960853] md: bind<sda2>
[ 983.977034] md: bind<sdb2>
[ 983.977735] md: md1: raid array is not clean -- starting background reconstruction
[ 984.178729] raid1: raid set md1 active with 2 out of 2 mirrors
[ 1043.185506] md: resync of RAID array md1
[ 1043.185506] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 1043.185506] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 1043.185506] md: using 128k window, over a total of 486785472 blocks.
[ 1521.729610] kjournald starting. Commit interval 5 seconds
[ 1521.733167] EXT3 FS on md1, internal journal
[ 1521.733204] EXT3-fs: mounted filesystem with ordered data mode.
[ 1545.098391] kjournald starting. Commit interval 5 seconds
[ 1545.261601] EXT3 FS on md0, internal journal
[ 1545.261601] EXT3-fs: mounted filesystem with ordered data mode.
[ 1558.176083] EXT3-fs error (device md0): ext3_free_blocks_sb: bit already cleared for block 34816
[ 1558.188181] EXT3-fs error (device md0): ext3_free_blocks_sb: bit already cleared for block 34817
[ 1558.188326] EXT3-fs error (device md0): ext3_free_blocks_sb: bit already cleared for block 34818
[ 1558.188326] EXT3-fs error (device md0): ext3_free_blocks_sb: bit already cleared for block 34819
[ 1558.188326] EXT3-fs error (device md0): ext3_free_blocks_sb: bit already cleared for block 34820
[ 1558.188326] EXT3-fs error (device md0): ext3_free_blocks_sb: bit already cleared for block 34821
[ 1558.188326] EXT3-fs error (device md0): ext3_free_blocks_sb: bit already cleared for block 34822
[ 1558.188326] EXT3-fs error (device md0): ext3_free_blocks_sb: bit already cleared for block 34823
[ 1632.537458] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 2827, block = 92635138
[ 1632.616021] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 2384, block = 78118914
[ 1648.452056] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3106, block = 101777408
[ 1648.487190] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 101777408, length 1
[ 1648.490889] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 101777409, length 1
[ 1648.493995] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 101777410, length 1
[ 1655.437528] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3107, block = 101810177
[ 1663.506385] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3108, block = 101842945
[ 1673.008441] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3109, block = 101875712
[ 1686.396390] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3110, block = 101908482
[ 1698.468927] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3112, block = 101974016
[ 1709.997696] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3113, block = 102006785
[ 1741.046083] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3116, block = 102105090
[ 1763.958090] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3118, block = 102170626
[ 1768.352757] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3113, block = 102006785
[ 1814.127437] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 540, block = 17694720
[ 1814.138428] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17694720, length 1
[ 1814.141348] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17694721, length 1
[ 1814.143422] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17694722, length 1
[ 1814.145682] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17694725, length 1
[ 1814.147696] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17694726, length 1
[ 1814.149722] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17694727, length 1
[ 1823.827702] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 541, block = 17727489
[ 1824.070345] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17727489, length 1
[ 1824.151623] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17727492, length 1
[ 1824.170326] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17727494, length 1
[ 1824.188909] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17727495, length 1
[ 1829.014176] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 542, block = 17760256
[ 1834.368073] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17760256, length 1
[ 1834.395755] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17760260, length 1
[ 1834.400827] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17760263, length 1
[ 1860.054676] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 544, block = 17825792
[ 1860.061531] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17825792, length 1
[ 1860.326134] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17825795, length 1
[ 1860.931089] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17825798, length 1
[ 1860.942210] EXT3-fs error (device md1): ext3_new_block: Allocating block in system zone - blocks from 17825799, length 1
[ 1864.024357] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 545, block = 17858561
[ 1864.957808] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 730, block = 23920640
[ 1865.080232] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 109, block = 3571712
[ 1865.415790] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3504, block = 114819073
[ 1865.456991] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 172, block = 5636098
[ 1865.657535] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3073, block = 100696066
[ 1871.344740] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 2084, block = 68288513
[ 1879.328338] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 2085, block = 68321280
[ 1886.126325] EXT3-fs error (device md1): ext3_valid_block_bitmap: Invalid block bitmap - block_group = 3619, block = 118587394
[ 2007.056044] eth0: link up, 10Mbps, half-duplex, lpa 0x0021
[ 2007.056106] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2017.348095] eth0: no IPv6 routers present
[ 6398.599098] ata3.00: exception Emask 0x0 SAct 0x0 SErr 0x280000 action 0x0
[ 6398.599301] ata3.00: BMDMA2 stat 0x10d0009
[ 6398.599394] ata3: SError: { 10B8B BadCRC }
[ 6398.599500] ata3.00: cmd 25/00:80:42:29:79/00:00:12:00:00/e0 tag 0 dma 65536 in
[ 6398.599507] res 51/04:10:b2:29:79/00:00:12:00:00/f0 Emask 0x1 (device error)
[ 6398.599653] ata3.00: status: { DRDY ERR }
[ 6398.599734] ata3.00: error: { ABRT }
[ 6398.625689] ata3.00: configured for UDMA/100
[ 6398.625872] ata3: EH complete
[ 6398.643012] sd 2:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[ 6398.652321] sd 2:0:0:0: [sda] Write Protect is off
[ 6398.652321] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 6398.674102] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
** Loaded modules:
Module Size Used by
nfsd 186928 13
lockd 54568 1 nfsd
nfs_acl 2912 1 nfsd
auth_rpcgss 33952 1 nfsd
sunrpc 162528 11 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3936 1 nfsd
ipv6 235396 21
dm_mod 46216 0
loop 12748 0
button 6096 0
i2c_viapro 6836 0
snd_via82xx 20664 0
gameport 10700 1 snd_via82xx
i2c_core 19828 1 i2c_viapro
snd_ac97_codec 88452 1 snd_via82xx
ac97_bus 1728 1 snd_ac97_codec
snd_mpu401_uart 6368 1 snd_via82xx
snd_pcm 62660 2 snd_via82xx,snd_ac97_codec
snd_timer 17800 1 snd_pcm
snd_page_alloc 7816 2 snd_via82xx,snd_pcm
snd_rawmidi 18496 1 snd_mpu401_uart
snd_seq_device 6380 1 snd_rawmidi
via686a 11948 0
snd 45636 7 snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_pcm,snd_timer,snd_rawmidi,snd_seq_device
via_agp 7744 1
soundcore 6368 1 snd
agpgart 28808 1 via_agp
parport_pc 22500 0
shpchp 25528 0
parport 30988 1 parport_pc
pci_hotplug 23460 1 shpchp
pcspkr 2432 0
evdev 8000 0
ext3 105576 2
jbd 39476 1 ext3
mbcache 7108 1 ext3
raid10 18560 0
raid456 117008 0
async_xor 3520 1 raid456
async_memcpy 2304 1 raid456
async_tx 6316 3 raid456,async_xor,async_memcpy
xor 14696 2 raid456,async_xor
raid1 18016 2
raid0 6368 0
multipath 6112 0
linear 4544 0
md_mod 67100 7 raid10,raid456,raid1,raid0,multipath,linear
ide_floppy 12704 0
ide_cd_mod 27684 0
cdrom 30176 1 ide_cd_mod
ide_disk 10496 3
ide_pci_generic 3908 0 [permanent]
sd_mod 22200 6
floppy 47716 0
via82cxxx 6948 0 [permanent]
ide_core 96168 5 ide_floppy,ide_cd_mod,ide_disk,ide_pci_generic,via82cxxx
sata_sil 7176 4
via_rhine 18664 0
mii 4896 1 via_rhine
ata_generic 4676 0
uhci_hcd 18672 0
libata 140448 2 sata_sil,ata_generic
usbcore 118192 2 uhci_hcd
scsi_mod 129548 2 sd_mod,libata
dock 8304 1 libata
thermal 15228 0
processor 32576 2 thermal
fan 4196 0
thermal_sys 10856 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] [1106:0691] (rev c4)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+ INTx-
Latency: 8
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-via
Kernel modules: via-agp
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] [1106:8598] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000a000-0000afff
Memory behind bridge: d8000000-d9ffffff
Prefetchable memory behind bridge: d4000000-d7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel modules: shpchp
00:07.0 ISA bridge [0601]: VIA Technologies, Inc. VT82C686 [Apollo Super South] [1106:0686] (rev 1b)
Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge [1106:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: parport_pc
Kernel modules: parport_pc
00:07.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at b000 [size=16]
Capabilities: <access denied>
Kernel driver in use: VIA_IDE
Kernel modules: via82cxxx
00:07.2 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 0e) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.3 USB Controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 0e) (prog-if 00 [UHCI])
Subsystem: First International Computer, Inc. VA-502 Mainboard [0925:1234]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin D routed to IRQ 5
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:07.4 Bridge [0680]: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] [1106:3057] (rev 20)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel modules: i2c-viapro, via686a
00:07.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT82C686 AC97 Audio Controller [1106:3058] (rev 21)
Subsystem: Biostar Microtech Int'l Corp Device [1565:0025]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 12
Region 0: I/O ports at bc00 [size=256]
Region 1: I/O ports at c000 [size=4]
Region 2: I/O ports at c400 [size=4]
Capabilities: <access denied>
Kernel driver in use: VIA 82xx Audio
Kernel modules: snd-via82xx
00:09.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 42)
Subsystem: D-Link System Inc DFE-530TX rev A [1186:1400]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at cc00 [size=256]
Region 1: Memory at db000000 (32-bit, non-prefetchable) [size=256]
[virtual] Expansion ROM at 10080000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: via-rhine
Kernel modules: via-rhine
00:0b.0 Parallel controller [0701]: Timedia Technology Co Ltd Device [1409:7268] (rev 01) (prog-if 02 [ECP])
Subsystem: Timedia Technology Co Ltd Device [1409:0103]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 5
Region 0: I/O ports at d000 [size=8]
Region 1: I/O ports at d400 [size=8]
Kernel driver in use: parport_pc
Kernel modules: parport_pc
00:0c.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02)
Subsystem: Silicon Image, Inc. Device [1095:7114]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d800 [size=8]
Region 1: I/O ports at dc00 [size=4]
Region 2: I/O ports at e000 [size=8]
Region 3: I/O ports at e400 [size=4]
Region 4: I/O ports at e800 [size=16]
Region 5: Memory at db001000 (32-bit, non-prefetchable) [size=1K]
[virtual] Expansion ROM at 10000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: sata_sil
Kernel modules: sata_sil
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Rage 128 PF/PRO AGP 4x TMDS [1002:5046] (prog-if 00 [VGA controller])
Subsystem: ATI Technologies Inc Rage Fury Pro [1002:0004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d4000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at a000 [size=256]
Region 2: Memory at d9000000 (32-bit, non-prefetchable) [size=16K]
[virtual] Expansion ROM at d8000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel modules: aty128fb
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-2-686 (SMP w/1 CPU core)
Locale: LANG=it_IT.UTF-8, LC_CTYPE=it_IT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-2-686 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-2-686 recommends:
ii libc6-i686 2.7-18 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-2-686 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-2-686/postinst/bootloader-error-2.6.26-2-686:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-2-686/postinst/old-dir-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/overwriting-modules-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/bootloader-test-error-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-2.6.26-2-686: false
linux-image-2.6.26-2-686/preinst/bootloader-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/abort-overwrite-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/abort-install-2.6.26-2-686:
linux-image-2.6.26-2-686/postinst/depmod-error-initrd-2.6.26-2-686: false
linux-image-2.6.26-2-686/postinst/create-kimage-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/failed-to-move-modules-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/initrd-2.6.26-2-686:
linux-image-2.6.26-2-686/preinst/lilo-has-ramdisk:
linux-image-2.6.26-2-686/prerm/would-invalidate-boot-loader-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/kimage-is-a-directory:
linux-image-2.6.26-2-686/postinst/old-initrd-link-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/elilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/preinst/lilo-initrd-2.6.26-2-686: true
linux-image-2.6.26-2-686/prerm/removing-running-kernel-2.6.26-2-686: true
linux-image-2.6.26-2-686/postinst/old-system-map-link-2.6.26-2-686: true
--- End Message ---