--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: dell_laptop: incorrect rfkill device state on Dell Vostro 1320
- From: Sam Morris <sam@robots.org.uk>
- Date: Sun, 30 Aug 2009 17:10:18 +0100
- Message-id: <20090830161018.3965.8398.reportbug@avon>
Package: linux-image-2.6.30-bpo.1-amd64
Version: 2.6.30-6~bpo50+1
Severity: important
On the Dell Vostro 1320, the dell_laptop kernel module creates an rfkill
device that reports the wrong state:
$ readlink /sys/class/rfkill/rfkill0
.../../devices/virtual/rfkill/rfkill0
$ cat /sys/class/rfkill/rfkill1/state
1
# iwlist wlan0 scan | wc -l
81
This prevents the use of NetworkManager, since it relies on the rfkill
data from the kernel when disabling the part of its user interface that
allows the user to scan for and connect to wireless networks.
-- Package-specific info:
** Version:
Linux version 2.6.30-bpo.1-amd64 (Debian 2.6.30-6~bpo50+1) (nobse@debian.org) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 SMP Mon Aug 17 08:42:50 UTC 2009
** Command line:
root=/dev/sda3 ro quiet
** Not tainted
** Kernel log:
[ 6172.689708] ahci 0000:00:1f.2: setting latency timer to 64
[ 6172.689885] r8169 0000:08:00.0: wake-up capability disabled by ACPI
[ 6172.689891] r8169 0000:08:00.0: PME# disabled
[ 6172.689966] iwlagn 0000:0e:00.0: restoring config space at offset 0x1 (was 0x100406, writing 0x100006)
[ 6172.760171] firewire_core: skipped bus generations, destroying all nodes
[ 6172.760347] sdhci-pci 0000:1a:00.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6172.760349] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim to support it.
[ 6172.760362] sdhci-pci 0000:1a:00.1: setting latency timer to 64
[ 6172.760397] pci 0000:1a:00.2: PME# disabled
[ 6172.820147] sd 0:0:0:0: [sda] Starting disk
[ 6173.172111] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6173.173639] ata2.00: configured for UDMA/100
[ 6173.212132] ata2: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 6173.212135] ata2: irq_stat 0x40000001
[ 6173.213617] ata2.00: configured for UDMA/100
[ 6173.213620] ata2: EH complete
[ 6173.260121] firewire_core: rediscovered device fw0
[ 6174.124112] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 6174.137903] ata1.00: configured for UDMA/133
[ 6174.137919] ata1: exception Emask 0x10 SAct 0x0 SErr 0x0 action 0x9 t4
[ 6174.137921] ata1: irq_stat 0x00400040, connection status changed
[ 6174.140476] ata1.00: configured for UDMA/133
[ 6174.140480] ata1: EH complete
[ 6174.148622] pci 0000:00:02.0: setting latency timer to 64
[ 6174.150013] Restarting tasks ... done.
[ 6174.283146] Registered led device: iwl-phy0::radio
[ 6174.283163] Registered led device: iwl-phy0::assoc
[ 6174.283179] Registered led device: iwl-phy0::RX
[ 6174.283193] Registered led device: iwl-phy0::TX
[ 6174.336631] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6174.397728] r8169: eth0: link down
[ 6174.397980] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6204.551233] wlan0: authenticate with AP 00:1d:73:05:cf:cd
[ 6204.553215] wlan0: authenticated
[ 6204.553220] wlan0: associate with AP 00:1d:73:05:cf:cd
[ 6204.555619] wlan0: RX AssocResp from 00:1d:73:05:cf:cd (capab=0x411 status=0 aid=2)
[ 6204.555625] wlan0: associated
[ 6204.560632] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6220.672227] wlan0: no IPv6 routers present
[ 6377.325573] wlan0: deauthenticating by local choice (reason=3)
[ 6377.595206] Registered led device: iwl-phy0::radio
[ 6377.595223] Registered led device: iwl-phy0::assoc
[ 6377.595239] Registered led device: iwl-phy0::RX
[ 6377.595254] Registered led device: iwl-phy0::TX
[ 6377.606862] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6377.839593] r8169: eth0: link down
[ 6377.839888] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6436.290984] Registered led device: iwl-phy0::radio
[ 6436.291016] Registered led device: iwl-phy0::assoc
[ 6436.291043] Registered led device: iwl-phy0::RX
[ 6436.291070] Registered led device: iwl-phy0::TX
[ 6436.301046] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6450.748947] wlan0: authenticate with AP 00:1d:73:05:cf:cd
[ 6450.750959] wlan0: authenticated
[ 6450.750963] wlan0: associate with AP 00:1d:73:05:cf:cd
[ 6450.753080] wlan0: RX AssocResp from 00:1d:73:05:cf:cd (capab=0x411 status=0 aid=2)
[ 6450.753083] wlan0: associated
[ 6450.754485] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6465.396232] wlan0: no IPv6 routers present
[ 6469.605038] wlan0: deauthenticating by local choice (reason=3)
[ 6501.616782] Registered led device: iwl-phy0::radio
[ 6501.616810] Registered led device: iwl-phy0::assoc
[ 6501.616829] Registered led device: iwl-phy0::RX
[ 6501.616846] Registered led device: iwl-phy0::TX
[ 6501.633210] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6501.646083] r8169: eth0: link down
[ 6501.646375] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6503.687811] Registered led device: iwl-phy0::radio
[ 6503.687840] Registered led device: iwl-phy0::assoc
[ 6503.687853] Registered led device: iwl-phy0::RX
[ 6503.687867] Registered led device: iwl-phy0::TX
[ 6503.705551] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6503.766579] r8169: eth0: link down
[ 6503.766853] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6539.503948] Registered led device: iwl-phy0::radio
[ 6539.503977] Registered led device: iwl-phy0::assoc
[ 6539.503994] Registered led device: iwl-phy0::RX
[ 6539.504020] Registered led device: iwl-phy0::TX
[ 6539.516673] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6539.531075] r8169: eth0: link down
[ 6539.531363] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6555.146805] Registered led device: iwl-phy0::radio
[ 6555.146824] Registered led device: iwl-phy0::assoc
[ 6555.146839] Registered led device: iwl-phy0::RX
[ 6555.146858] Registered led device: iwl-phy0::TX
[ 6555.172882] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6556.774666] Registered led device: iwl-phy0::radio
[ 6556.774683] Registered led device: iwl-phy0::assoc
[ 6556.774696] Registered led device: iwl-phy0::RX
[ 6556.774711] Registered led device: iwl-phy0::TX
[ 6556.852818] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 6556.863857] r8169: eth0: link down
[ 6556.864290] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6571.980070] wlan0: authenticate with AP 00:1d:73:05:cf:cd
[ 6571.982012] wlan0: authenticated
[ 6571.982016] wlan0: associate with AP 00:1d:73:05:cf:cd
[ 6571.985269] wlan0: RX AssocResp from 00:1d:73:05:cf:cd (capab=0x411 status=0 aid=2)
[ 6571.985274] wlan0: associated
[ 6571.992486] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 6586.232235] wlan0: no IPv6 routers present
** Loaded modules:
Module Size Used by
i915 166680 1
drm 172480 2 i915
binfmt_misc 9260 1
i2c_algo_bit 5988 1 i915
rfcomm 35952 0
l2cap 21152 5 rfcomm
bluetooth 55060 4 rfcomm,l2cap
ppdev 7784 0
parport_pc 27080 0
lp 10612 0
parport 38224 3 ppdev,parport_pc,lp
acpi_cpufreq 8912 0
cpufreq_userspace 3620 0
cpufreq_stats 4660 0
cpufreq_conservative 7928 0
cpufreq_powersave 1792 0
loop 15948 0
firewire_sbp2 15360 0
joydev 10992 0
arc4 2048 2
ecb 3072 2
snd_hda_codec_idt 62496 1
iwlagn 83284 0
iwlcore 106368 1 iwlagn
dcdbas 8528 0
snd_hda_intel 26680 1
rfkill 12084 2 iwlcore
snd_hda_codec 75264 2 snd_hda_codec_idt,snd_hda_intel
mac80211 160304 2 iwlagn,iwlcore
snd_hwdep 8152 1 snd_hda_codec
snd_pcm 78504 2 snd_hda_intel,snd_hda_codec
snd_seq 51232 0
snd_timer 21824 2 snd_pcm,snd_seq
snd_seq_device 7476 1 snd_seq
psmouse 42140 0
serio_raw 5844 0
i2c_i801 10464 0
pcspkr 2800 0
evdev 10448 15
snd 63880 10 snd_hda_codec_idt,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
soundcore 7984 1 snd
i2c_core 25424 4 i915,drm,i2c_algo_bit,i2c_i801
iTCO_wdt 12160 0
snd_page_alloc 9920 2 snd_hda_intel,snd_pcm
cfg80211 65080 3 iwlagn,iwlcore,mac80211
battery 12696 0
video 21900 1 i915
output 3472 1 video
ac 5096 0
button 6512 0
processor 40048 3 acpi_cpufreq
intel_agp 28752 1
ext3 122528 1
jbd 47960 1 ext3
mbcache 8804 1 ext3
sg 23992 0
sr_mod 15908 0
cdrom 34344 1 sr_mod
sd_mod 33656 3
crc_t10dif 2096 1 sd_mod
ahci 36448 2
libata 175340 1 ahci
scsi_mod 158544 5 firewire_sbp2,sg,sr_mod,sd_mod,libata
sdhci_pci 8128 0
sdhci 17540 1 sdhci_pci
mmc_core 55088 1 sdhci
led_class 5048 2 iwlcore,sdhci
r8169 32356 0
mii 5600 1 r8169
firewire_ohci 22372 0
firewire_core 44836 2 firewire_sbp2,firewire_ohci
crc_itu_t 2720 1 firewire_core
ehci_hcd 33596 0
uhci_hcd 22128 0
thermal 15936 0
fan 5240 0
thermal_sys 16448 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
Subsystem: Dell Device [1028:02bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 33
Region 0: Memory at f6800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 1800 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f6100000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at f6504800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
Subsystem: Dell Device [1028:02bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f6500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-f9ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 88000000-880fffff
Prefetchable memory behind bridge: 00000000f6000000-00000000f60fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0f, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f3ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=14, subordinate=15, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f5ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=1a, subordinate=1a, sec-latency=0
Memory behind bridge: f6200000-f62fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:02bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f6504c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=26, subordinate=26, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller [8086:2919] (rev 03)
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 31
Region 0: I/O ports at 1818 [size=8]
Region 1: I/O ports at 180c [size=4]
Region 2: I/O ports at 1810 [size=8]
Region 3: I/O ports at 1808 [size=4]
Region 4: I/O ports at 18e0 [size=32]
Region 5: Memory at f6504000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at 88100000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 03)
Subsystem: Dell Device [1028:02bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at f6004000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f6000000 (64-bit, prefetchable) [size=16K]
[virtual] Expansion ROM at f6020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
0e:00.0 Network controller [0280]: Intel Corporation Wireless WiFi Link 5100 [8086:4232]
Subsystem: Intel Corporation Wireless WiFi Link 5100 [8086:1321]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at fa000000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
Kernel modules: iwlagn
1a:00.0 FireWire (IEEE 1394) [0c00]: O2 Micro, Inc. Device [1217:10f7] (rev 01) (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:02bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6200000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f6202000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
1a:00.1 SD Host controller [0805]: O2 Micro, Inc. Device [1217:8120] (rev 01)
Subsystem: Dell Device [1028:02bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f6203800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci-pci
1a:00.2 Mass storage controller [0180]: O2 Micro, Inc. Device [1217:8130] (rev 01)
Subsystem: Dell Device [1028:02bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f6201000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at f6203000 (32-bit, non-prefetchable) [size=2K]
Region 2: Memory at f6202800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
-- System Information:
Debian Release: 5.0.2
APT prefers stable
APT policy: (540, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.30-bpo.1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-bpo.1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.30-bpo.1-amd64 recommends no packages.
Versions of packages linux-image-2.6.30-bpo.1-amd64 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information excluded
--- End Message ---