--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.26-1-686-bigmem: Firewire removable hard drive re-detected after S3 Suspend
- From: Hakan BAYINDIR <hbayindir@gmail.com>
- Date: Sun, 23 Nov 2008 13:55:03 +0200
- Message-id: <20081123115503.10358.14448.reportbug@localhost>
Package: linux-image-2.6.26-1-686-bigmem
Version: 2.6.26-10
Severity: important
I'm using a Maxtor One Touch 4 Plus hard disk over firewire. This disk uses a power mechanism that is synchronized with PC. When system sleeps or powers off, hard disk turns it off and turns on as soon as you touch the power button of the PC.
Since I'm using always using it, I mount it over fstab via uuid scheme (because some kernel update made the order of device detection a bit random and I don't know if it was fixed). Until the latest kernel update, this scheme was working very well. After this last update, when I wake up my PC from sleep, my firewire disk is re-detected as a new device under /dev and asked if it should be mounted by KDE. I rarely experienced this before but after the last update it became a "behaviour" and clipping the usability of the whole system since I prefer sleeping it or hibernating it.
I'm using debian testing with some irrevelant packages (pidgin, openoffice.org) from unstable and experimental respectively.
The kernel log below shows that my device is detected as sde after wake and re-detected as sdd after unplugging, unmounting the ghost sdd and re-plugging it.
-- Package-specific info:
** Version:
Linux version 2.6.26-1-686-bigmem (Debian 2.6.26-10) (waldi@debian.org) (gcc version 4.1.3 20080623 (prerelease) (Debian 4.1.2-23)) #1 SMP Sat Nov 8 19:46:36 UTC 2008
** Command line:
root=/dev/sda1 ro vga=794
** Tainted: P W (513)
** Kernel log:
[ 7813.905998] sde:<6>input,hidraw3: USB HID v1.11 Mouse [Microsoft Microsoft� Wireless Laser Mouse 8000] on usb-0000:00:1d.2-2.3
[ 7813.930377] usb 6-2.3: New USB device found, idVendor=045e, idProduct=0714
[ 7813.930381] usb 6-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 7813.930384] usb 6-2.3: Product: Microsoft� Wireless Laser Mouse 8000
[ 7813.930387] usb 6-2.3: Manufacturer: Microsoft
[ 7813.930389] usb 6-2.3: SerialNumber: 00125A597FEF
[ 7813.954223] sde1
[ 7813.954223] sd 9:0:0:0: [sde] Attached SCSI disk
[ 7813.954223] sd 9:0:0:0: Attached scsi generic sg4 type 0
[ 7833.031318] ieee1394: Error parsing configrom for node 1-00:1023
[ 7833.031373] ieee1394: Node suspended: ID:BUS[1-00:1023] GUID[0010b9021143498d]
[ 7854.035025] ieee1394: Node resumed: ID:BUS[1-00:1023] GUID[0010b9021143498d]
[ 7854.036557] scsi10 : SBP-2 IEEE-1394
[ 7855.378431] ieee1394: sbp2: Logged into SBP-2 device
[ 7855.382431] ieee1394: sbp2: Node 1-00:1023: Max speed [S400] - Max payload [2048]
[ 7855.382431] scsi 10:0:0:0: Direct-Access Maxtor OneTouch 0121 PQ: 0 ANSI: 4
[ 7855.382431] sd 10:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
[ 7855.382431] sd 10:0:0:0: [sde] Write Protect is off
[ 7855.382431] sd 10:0:0:0: [sde] Mode Sense: 2d 08 00 00
[ 7855.382431] sd 10:0:0:0: [sde] Got wrong page
[ 7855.382431] sd 10:0:0:0: [sde] Assuming drive cache: write through
[ 7855.382431] sd 10:0:0:0: [sde] 1953525168 512-byte hardware sectors (1000205 MB)
[ 7855.382431] sd 10:0:0:0: [sde] Write Protect is off
[ 7855.382431] sd 10:0:0:0: [sde] Mode Sense: 2d 08 00 00
[ 7855.382431] sd 10:0:0:0: [sde] Got wrong page
[ 7855.382431] sd 10:0:0:0: [sde] Assuming drive cache: write through
[ 7855.382431] sde: sde1
[ 7855.447423] sd 10:0:0:0: [sde] Attached SCSI disk
[ 7855.447423] sd 10:0:0:0: Attached scsi generic sg4 type 0
[ 7884.256775] Buffer I/O error on device sdd1, logical block 0
[ 7884.256775] lost page write due to I/O error on sdd1
[ 7886.254748] kjournald starting. Commit interval 5 seconds
[ 7886.254748] EXT3 FS on sde1, internal journal
[ 7886.254748] EXT3-fs: recovery complete.
[ 7886.254748] EXT3-fs: mounted filesystem with ordered data mode.
[ 7928.275109] cdrom: sr0: mrw address space DMA selected
[ 7928.411090] cdrom: sr0: mrw address space DMA selected
[ 7934.034867] UDF-fs: Partition marked readonly; forcing readonly mount
[ 7934.057165] UDF-fs INFO UDF: Mounting volume 'RA3_PEDVD', timestamp 2008/10/03 17:07 (1078)
[ 8208.417116] ieee1394: Node changed: 1-01:1023 -> 1-00:1023
[ 8208.417125] ieee1394: Node suspended: ID:BUS[1-00:1023] GUID[0010b9021143498d]
[ 8216.127519] ieee1394: Error parsing configrom for node 1-00:1023
[ 8216.127520] ieee1394: Node changed: 1-00:1023 -> 1-01:1023
[ 8224.701232] ieee1394: Node resumed: ID:BUS[1-00:1023] GUID[0010b9021143498d]
[ 8224.701232] scsi11 : SBP-2 IEEE-1394
[ 8225.835127] ieee1394: sbp2: Logged into SBP-2 device
[ 8225.835193] ieee1394: sbp2: Node 1-00:1023: Max speed [S400] - Max payload [2048]
[ 8225.838092] scsi 11:0:0:0: Direct-Access Maxtor OneTouch 0121 PQ: 0 ANSI: 4
[ 8225.842671] sd 11:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
[ 8225.842671] sd 11:0:0:0: [sdd] Write Protect is off
[ 8225.842671] sd 11:0:0:0: [sdd] Mode Sense: 2d 08 00 00
[ 8225.842671] sd 11:0:0:0: [sdd] Got wrong page
[ 8225.842671] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[ 8225.842671] sd 11:0:0:0: [sdd] 1953525168 512-byte hardware sectors (1000205 MB)
[ 8225.842671] sd 11:0:0:0: [sdd] Write Protect is off
[ 8225.842671] sd 11:0:0:0: [sdd] Mode Sense: 2d 08 00 00
[ 8225.846671] sd 11:0:0:0: [sdd] Got wrong page
[ 8225.846671] sd 11:0:0:0: [sdd] Assuming drive cache: write through
[ 8225.846671] sdd: sdd1
[ 8225.894603] sd 11:0:0:0: [sdd] Attached SCSI disk
[ 8225.894603] sd 11:0:0:0: Attached scsi generic sg4 type 0
[ 8236.002810] kjournald starting. Commit interval 5 seconds
[ 8236.010013] EXT3 FS on sdd1, internal journal
[ 8236.010013] EXT3-fs: mounted filesystem with ordered data mode.
[10070.475361] cdrom: sr0: mrw address space DMA selected
[10070.517209] cdrom: sr0: mrw address space DMA selected
[10071.115842] UDF-fs: Partition marked readonly; forcing readonly mount
[10071.178528] UDF-fs INFO UDF: Mounting volume 'RA3', timestamp 2008/10/10 16:56 (1078)
[10426.017076] cdrom: sr0: mrw address space DMA selected
[10426.091350] cdrom: sr0: mrw address space DMA selected
[10432.525739] UDF-fs: Partition marked readonly; forcing readonly mount
[10432.545739] UDF-fs INFO UDF: Mounting volume 'RA3_PEDVD', timestamp 2008/10/03 17:07 (1078)
[16746.870441] usb 8-8: new high speed USB device using ehci_hcd and address 6
[16747.003661] usb 8-8: configuration #1 chosen from 1 choice
[16747.004133] usb 8-8: New USB device found, idVendor=0781, idProduct=5408
[16747.004139] usb 8-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[16747.004142] usb 8-8: Product: U3 Titanium
[16747.004144] usb 8-8: Manufacturer: SanDisk Corporation
[16747.004147] usb 8-8: SerialNumber: 00001623B270BD41
[16747.152049] Initializing USB Mass Storage driver...
[16747.152049] scsi12 : SCSI emulation for USB Mass Storage devices
[16747.152049] usbcore: registered new interface driver usb-storage
[16747.152049] USB Mass Storage support registered.
[16747.152049] usb-storage: device found at 6
[16747.152049] usb-storage: waiting for device to settle before scanning
[16754.445681] usb-storage: device scan complete
[16754.445681] scsi 12:0:0:0: Direct-Access SanDisk U3 Titanium 3.27 PQ: 0 ANSI: 2
[16754.447184] sd 12:0:0:0: [sde] 8027790 512-byte hardware sectors (4110 MB)
[16754.447184] sd 12:0:0:0: [sde] Write Protect is off
[16754.447184] sd 12:0:0:0: [sde] Mode Sense: 03 00 00 00
[16754.447184] sd 12:0:0:0: [sde] Assuming drive cache: write through
[16754.447184] sd 12:0:0:0: [sde] 8027790 512-byte hardware sectors (4110 MB)
[16754.450657] sd 12:0:0:0: [sde] Write Protect is off
[16754.450662] sd 12:0:0:0: [sde] Mode Sense: 03 00 00 00
[16754.450666] sd 12:0:0:0: [sde] Assuming drive cache: write through
[16754.450671] sde: sde1
[16754.451180] sd 12:0:0:0: [sde] Attached SCSI removable disk
[16754.451180] sd 12:0:0:0: Attached scsi generic sg5 type 0
[16757.869262] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[17756.135162] usb 8-8: USB disconnect, address 6
** Loaded modules:
Module Size Used by
nls_utf8 2528 0
nls_cp437 6336 0
vfat 9920 0
fat 41632 1 vfat
usb_storage 76768 0
isofs 28932 0
zlib_inflate 14912 1 isofs
udf 68548 0
nls_base 7588 6 nls_utf8,nls_cp437,vfat,fat,isofs,udf
crc_itu_t 2848 1 udf
nvidia 7087428 24
rfcomm 29040 4
l2cap 18016 9 rfcomm
nfsd 187440 13
lockd 55016 1 nfsd
nfs_acl 3680 1 nfsd
auth_rpcgss 34752 1 nfsd
sunrpc 162912 11 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 4672 1 nfsd
ppdev 7236 0
parport_pc 23396 0
lp 8932 0
parport 31756 3 ppdev,parport_pc,lp
battery 10948 0
acpi_cpufreq 7564 3
cpufreq_userspace 4420 0
cpufreq_stats 4640 0
cpufreq_powersave 2624 0
cpufreq_ondemand 7244 1
freq_table 5088 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
cpufreq_conservative 6728 0
microcode 9772 0
ipv6 235876 26
fuse 43676 1
vboxdrv 64800 0
coretemp 6272 0
f71882fg 9032 0
loop 13516 0
snd_usb_audio 71104 0
snd_usb_lib 14208 1 snd_usb_audio
snd_pcm_oss 33568 0
snd_mixer_oss 13088 1 snd_pcm_oss
snd_emu10k1_synth 6432 0
snd_emux_synth 28704 1 snd_emu10k1_synth
snd_seq_virmidi 5664 1 snd_emux_synth
snd_seq_midi_emul 6144 1 snd_emux_synth
tuner_simple 12848 1
tuner_types 14656 1 tuner_simple
tuner 22728 0
snd_emu10k1 116000 4 snd_emu10k1_synth
snd_seq_midi 6496 0
snd_rawmidi 19264 4 snd_usb_lib,snd_seq_virmidi,snd_emu10k1,snd_seq_midi
firmware_class 7584 2 microcode,snd_emu10k1
snd_ac97_codec 89252 1 snd_emu10k1
ac97_bus 2496 1 snd_ac97_codec
snd_pcm 63396 5 snd_usb_audio,snd_pcm_oss,snd_emu10k1,snd_ac97_codec
snd_page_alloc 8648 2 snd_emu10k1,snd_pcm
snd_util_mem 4800 2 snd_emux_synth,snd_emu10k1
snd_hwdep 6980 3 snd_usb_audio,snd_emux_synth,snd_emu10k1
saa7134 126484 0
i2c_i801 8688 0
snd_seq_dummy 3428 0
videodev 28288 2 tuner,saa7134
v4l1_compat 13028 1 videodev
compat_ioctl32 2080 1 saa7134
v4l2_common 11008 2 tuner,saa7134
videobuf_dma_sg 11972 1 saa7134
hci_usb 13020 2
snd_seq_oss 25760 0
psmouse 33104 0
snd_seq_midi_event 7200 3 snd_seq_virmidi,snd_seq_midi,snd_seq_oss
videobuf_core 16868 2 saa7134,videobuf_dma_sg
bluetooth 45668 7 rfcomm,l2cap,hci_usb
emu10k1_gp 3552 0
snd_seq 42224 10 snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi,snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
ir_kbd_i2c 7888 1 saa7134
ir_common 40388 2 saa7134,ir_kbd_i2c
tveeprom 11748 1 saa7134
serio_raw 5508 0
pcspkr 3200 0
gameport 11468 2 emu10k1_gp
iTCO_wdt 10276 0
i2c_core 20596 8 nvidia,tuner_simple,tuner,saa7134,i2c_i801,v4l2_common,ir_kbd_i2c,tveeprom
snd_timer 18568 3 snd_emu10k1,snd_pcm,snd_seq
snd_seq_device 7148 8 snd_emu10k1_synth,snd_emux_synth,snd_emu10k1,snd_seq_midi,snd_rawmidi,snd_seq_dummy,snd_seq_oss,snd_seq
snd 46372 20 snd_usb_audio,snd_pcm_oss,snd_mixer_oss,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_rawmidi,snd_ac97_codec,snd_pcm,snd_hwdep,snd_seq_oss,snd_seq,snd_timer,snd_seq_device
soundcore 7136 1 snd
button 6832 0
intel_agp 23268 0
agpgart 29576 2 nvidia,intel_agp
joydev 9248 0
evdev 8768 5
ext3 106184 5
jbd 40212 1 ext3
mbcache 7876 1 ext3
sg 27732 0
sr_mod 14084 0
cdrom 30944 1 sr_mod
sd_mod 22968 10
sbp2 19724 1
ata_piix 15012 5
ata_generic 5444 0
libata 141248 2 ata_piix,ata_generic
usbhid 36736 0
scsi_mod 130124 6 usb_storage,sg,sr_mod,sd_mod,sbp2,libata
hid 33952 1 usbhid
dock 9040 1 libata
ff_memless 5160 1 usbhid
floppy 48516 0
ide_pci_generic 4676 0 [permanent]
ide_core 97000 1 ide_pci_generic
ohci1394 26000 1
ieee1394 76600 2 sbp2,ohci1394
r8169 24612 0
ehci_hcd 29420 0
uhci_hcd 19504 0
usbcore 119184 8 usb_storage,snd_usb_audio,snd_usb_lib,hci_usb,usbhid,ehci_hcd,uhci_hcd
thermal 15996 0
processor 33536 2 acpi_cpufreq,thermal
fan 4932 0
thermal_sys 11624 3 thermal,processor,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at bc00 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at b880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 [8086:2948] (rev 02) (prog-if 00 [Normal decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 [8086:294a] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at b800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at b480 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at b400 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at b080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9fff800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA IDE Controller [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at ac00 [size=4]
Region 2: I/O ports at a880 [size=8]
Region 3: I/O ports at a800 [size=4]
Region 4: I/O ports at a480 [size=16]
Region 5: I/O ports at a400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f9fff400 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 0400 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE Controller [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Micro-Star International Co., Ltd. Device [1462:7345]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at a000 [size=8]
Region 1: I/O ports at 9c00 [size=4]
Region 2: I/O ports at 9880 [size=8]
Region 3: I/O ports at 9800 [size=4]
Region 4: I/O ports at 9480 [size=16]
Region 5: I/O ports at 9400 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix
01:00.0 VGA compatible controller [0300]: nVidia Corporation G80 [GeForce 8800 GTS] [10de:0193] (rev a2) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:0421]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
[virtual] Expansion ROM at fe9e0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
04:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: Micro-Star International Co., Ltd. Device [1462:345c]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 219
Region 0: I/O ports at d800 [size=256]
Region 2: Memory at feaff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at feac0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
05:00.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04)
Subsystem: Creative Labs SB Audigy 2 ZS (SB0350) [1102:2002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at ec00 [size=64]
Capabilities: <access denied>
Kernel driver in use: EMU10K1_Audigy
Kernel modules: snd-emu10k1
05:00.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 04)
Subsystem: Creative Labs SB Audigy MIDI/Game Port [1102:0040]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: I/O ports at e880 [size=8]
Capabilities: <access denied>
Kernel driver in use: Emu10k1_gameport
Kernel modules: emu10k1-gp
05:00.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04) (prog-if 10 [OHCI])
Subsystem: Creative Labs SB Audigy FireWire Port [1102:0010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at febff800 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at febf8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
05:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7130 Video Broadcast Decoder [1131:7130] (rev 01)
Subsystem: Animation Technologies Inc. LifeView FlyVIDEO2000 [5168:0138]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 10000ns max)
Interrupt: pin A routed to IRQ 17
Region 0: Memory at febff400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: saa7134
Kernel modules: saa7134
05:02.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306 Fire II IEEE 1394 OHCI Link Layer Controller [1106:3044] (rev c0) (prog-if 10 [OHCI])
Subsystem: Micro-Star International Co., Ltd. Device [1462:345d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at febfe800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at e800 [size=128]
Capabilities: <access denied>
Kernel driver in use: ohci1394
Kernel modules: ohci1394
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: i386 (i686)
Kernel: Linux 2.6.26-1-686-bigmem (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.26-1-686-bigmem depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92j tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.26-1-686-bigmem recommends:
ii libc6-i686 2.7-16 GNU C Library: Shared libraries [i
Versions of packages linux-image-2.6.26-1-686-bigmem suggests:
ii grub 0.97-47 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.26 <none> (no description available)
-- debconf information:
linux-image-2.6.26-1-686-bigmem/preinst/elilo-initrd-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/create-kimage-link-2.6.26-1-686-bigmem: true
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.26-1-686-bigmem/preinst/overwriting-modules-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-initrd-2.6.26-1-686-bigmem: false
linux-image-2.6.26-1-686-bigmem/prerm/would-invalidate-boot-loader-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/old-initrd-link-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/bootloader-error-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/initrd-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/postinst/depmod-error-2.6.26-1-686-bigmem: false
linux-image-2.6.26-1-686-bigmem/postinst/old-dir-initrd-link-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/preinst/lilo-has-ramdisk:
linux-image-2.6.26-1-686-bigmem/postinst/bootloader-test-error-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/postinst/old-system-map-link-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/prerm/removing-running-kernel-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/postinst/kimage-is-a-directory:
linux-image-2.6.26-1-686-bigmem/preinst/failed-to-move-modules-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/abort-overwrite-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/abort-install-2.6.26-1-686-bigmem:
linux-image-2.6.26-1-686-bigmem/preinst/lilo-initrd-2.6.26-1-686-bigmem: true
linux-image-2.6.26-1-686-bigmem/preinst/bootloader-initrd-2.6.26-1-686-bigmem: true
--- End Message ---