--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-amd64: Kernel issues a stream of kobject_add_internal failed for threshold_bank5 with -EEXIST during boot
- From: Hauke Fath <hf@spg.tu-darmstadt.de>
- Date: Wed, 13 Mar 2013 13:18:55 +0100
- Message-id: <20130313121855.2180.60537.reportbug@Kuster.nt.e-technik.tu-darmstadt.de>
Package: linux-2.6
Version: 2.6.32-48squeeze1
Severity: important
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-48squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Feb 25 00:26:11 UTC 2013
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=26d2463e-fb90-480f-9054-d218e8dfa17e ro console=tty0 console=ttyS0,19200n8
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 253.685837] md: bind<sdb6>
[ 253.702321] md: bind<sda6>
[ 253.719652] raid1: raid set md2 active with 2 out of 2 mirrors
[ 253.754706] md2: detected capacity change from 0 to 100001799168
[ 253.791439] md2: unknown partition table
[ 253.995643] md: md3 stopped.
[ 254.014014] md: bind<sdb7>
[ 254.030487] md: bind<sda7>
[ 254.047847] raid1: raid set md3 active with 2 out of 2 mirrors
[ 254.082866] md3: detected capacity change from 0 to 699994783744
[ 254.119616] md3: unknown partition table
[ 254.324306] PM: Starting manual resume from disk
[ 254.355355] PM: Resume from partition 9:2
[ 254.355357] PM: Checking hibernation image.
[ 254.356232] PM: Error -22 checking image file
[ 254.356234] PM: Resume from disk failed.
[ 254.388361] kjournald starting. Commit interval 5 seconds
[ 254.388369] EXT3-fs: mounted filesystem with ordered data mode.
[ 255.207212] udev[777]: starting version 164
[ 255.327802] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 255.378085] ACPI: Power Button [PWRB]
[ 255.383425] processor LNXCPU:00: registered as cooling_device0
[ 255.386409] processor LNXCPU:01: registered as cooling_device1
[ 255.389383] processor LNXCPU:02: registered as cooling_device2
[ 255.392322] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 255.392329] processor LNXCPU:03: registered as cooling_device3
[ 255.394953] processor LNXCPU:04: registered as cooling_device4
[ 255.398140] processor LNXCPU:05: registered as cooling_device5
[ 255.401039] processor LNXCPU:06: registered as cooling_device6
[ 255.403635] processor LNXCPU:07: registered as cooling_device7
[ 255.406547] processor LNXCPU:08: registered as cooling_device8
[ 255.409775] processor LNXCPU:09: registered as cooling_device9
[ 255.412676] processor LNXCPU:0a: registered as cooling_device10
[ 255.415251] processor LNXCPU:0b: registered as cooling_device11
[ 255.418518] processor LNXCPU:0c: registered as cooling_device12
[ 255.421475] processor LNXCPU:0d: registered as cooling_device13
[ 255.424447] processor LNXCPU:0e: registered as cooling_device14
[ 255.427039] processor LNXCPU:0f: registered as cooling_device15
[ 256.051490] processor LNXCPU:10: registered as cooling_device16
[ 256.087206] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 256.131711] ACPI: Power Button [PWRF]
[ 256.158424] processor LNXCPU:11: registered as cooling_device17
[ 256.198637] processor LNXCPU:12: registered as cooling_device18
[ 256.238879] processor LNXCPU:13: registered as cooling_device19
[ 256.279166] processor LNXCPU:14: registered as cooling_device20
[ 256.319530] processor LNXCPU:15: registered as cooling_device21
[ 256.359869] processor LNXCPU:16: registered as cooling_device22
[ 256.400190] processor LNXCPU:17: registered as cooling_device23
[ 256.441295] processor LNXCPU:18: registered as cooling_device24
[ 256.481650] processor LNXCPU:19: registered as cooling_device25
[ 256.522028] processor LNXCPU:1a: registered as cooling_device26
[ 256.562457] usb-storage: device scan complete
[ 256.562492] processor LNXCPU:1b: registered as cooling_device27
[ 256.602864] processor LNXCPU:1c: registered as cooling_device28
[ 256.643145] scsi 6:0:0:0: CD-ROM TEAC DV-28S-W 1.2A PQ: 0 ANSI: 0
[ 256.643257] processor LNXCPU:1d: registered as cooling_device29
[ 256.646311] processor LNXCPU:1e: registered as cooling_device30
[ 256.649299] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 256.649403] processor LNXCPU:1f: registered as cooling_device31
[ 256.707167] Error: Driver 'pcspkr' is already registered, aborting...
[ 257.224967] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 257.262084] Uniform CD-ROM driver Revision: 3.20
[ 257.289951] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 257.318151] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 257.350161] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 257.382130] sr 6:0:0:0: Attached scsi generic sg2 type 5
[ 257.788479] Adding 97657988k swap on /dev/md2. Priority:-1 extents:1 across:97657988k
[ 258.032485] EXT3 FS on md1, internal journal
[ 258.108908] __ratelimit: 68 callbacks suppressed
[ 258.138470] mdadm: sending ioctl 1261 to a partition!
[ 258.144197] loop: module loaded
[ 258.198479] mdadm: sending ioctl 1261 to a partition!
[ 258.229093] mdadm: sending ioctl 1261 to a partition!
[ 258.267640] mdadm: sending ioctl 1261 to a partition!
[ 258.313280] mdadm: sending ioctl 1261 to a partition!
[ 258.343624] mdadm: sending ioctl 1261 to a partition!
[ 258.374215] mdadm: sending ioctl 1261 to a partition!
[ 258.404566] mdadm: sending ioctl 1261 to a partition!
[ 258.441988] mdadm: sending ioctl 1261 to a partition!
[ 258.472324] mdadm: sending ioctl 1261 to a partition!
[ 258.943215] kjournald starting. Commit interval 5 seconds
[ 258.976404] EXT3 FS on md3, internal journal
[ 259.002202] EXT3-fs: mounted filesystem with ordered data mode.
[ 259.522655] igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 259.525440] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 259.598751] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 261.488674] RPC: Registered udp transport module.
[ 261.519699] RPC: Registered tcp transport module.
[ 261.556246] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 261.634573] Slow work thread pool: Starting up
[ 261.663307] Slow work thread pool: Ready
[ 261.693955] FS-Cache: Loaded
[ 261.734780] FS-Cache: Netfs 'nfs' registered for caching
[ 261.768446] svc: failed to register lockdv1 RPC service (errno 97).
[ 261.806215] Invalid hostname "pid1723@Kuster:/net" in NFS lock request
[ 262.847237] svc: failed to register lockdv1 RPC service (errno 97).
[ 262.884955] Invalid hostname "pid1723@Kuster:/net" in NFS lock request
[ 270.580034] eth0: no IPv6 routers present
[ 518.162296] svc: failed to register lockdv1 RPC service (errno 97).
[ 698.439700] i2c /dev entries driver
** Model information
sys_vendor: Supermicro
product_name: H8DGU
product_version: 1234567890
chassis_vendor: Supermicro
chassis_version: 1234567890
bios_vendor: American Megatrends Inc.
bios_version: 3.0
board_vendor: Supermicro
board_name: H8DGU
board_version: 1234567890
** Loaded modules:
Module Size Used by
nfs 241498 1
lockd 57651 1 nfs
fscache 29882 1 nfs
nfs_acl 2031 1 nfs
auth_rpcgss 33524 1 nfs
sunrpc 161756 10 nfs,lockd,nfs_acl,auth_rpcgss
autofs 10850 2
loop 11799 0
sg 24085 0
sr_mod 12602 0
cdrom 29351 1 sr_mod
snd_pcm 60487 0
snd_timer 15598 1 snd_pcm
snd 46542 2 snd_pcm,snd_timer
i2c_piix4 8328 0
i2c_core 15835 1 i2c_piix4
soundcore 4598 1 snd
joydev 8459 0
snd_page_alloc 6265 1 snd_pcm
evdev 7352 4
pcspkr 1699 0
processor 29951 32
button 4650 0
ext3 106854 2
jbd 37349 1 ext3
mbcache 5050 1 ext3
raid1 18431 3
md_mod 73936 4 raid1
sd_mod 29953 8
crc_t10dif 1276 1 sd_mod
ata_generic 3239 0
usb_storage 40233 0
usbhid 33324 0
hid 63273 1 usbhid
pata_atiixp 3505 0
ahci 32950 6
libata 133824 3 ata_generic,pata_atiixp,ahci
igb 91336 0
thermal 11674 0
dca 3761 1 igb
ohci_hcd 19375 0
ehci_hcd 32145 0
usbcore 123399 5 usb_storage,usbhid,ohci_hcd,ehci_hcd
nls_base 6377 1 usbcore
scsi_mod 126901 5 sg,sr_mod,sd_mod,usb_storage,libata
thermal_sys 11942 2 processor,thermal
** PCI devices:
00:00.0 Host bridge [0600]: ATI Technologies Inc RD890 Northbridge only dual slot (2x8) PCI-e GFX Hydra part [1002:5a12] (rev 02)
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Capabilities: <access denied>
00:00.2 Generic system peripheral [0806]: ATI Technologies Inc Device [1002:5a23]
Subsystem: ATI Technologies Inc Device [1002:5a23]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: ATI Technologies Inc RD890 PCI to PCI bridge (PCI express gpp port D) [1002:5a18] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at d000 [size=8]
Region 1: I/O ports at c000 [size=4]
Region 2: I/O ports at b000 [size=8]
Region 3: I/O ports at a000 [size=4]
Region 4: I/O ports at 9000 [size=16]
Region 5: Memory at feafa400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feaf6000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feaf7000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at feafa800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feaf8000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at feaf9000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ATI Technologies Inc SB700/SB800 USB EHCI Controller [1002:4396]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at feafac00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller [1002:4385] (rev 3d)
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: ATI Technologies Inc SB700/SB800 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host controller [1002:439d]
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fdf00000-fe7fffff
Prefetchable memory behind bridge: fc000000-fcffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ATI Technologies Inc Device [1002:4396]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at feafb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci_hcd
00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:19.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1a.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1a.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1a.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1b.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:1b.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1b.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:04.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])
Subsystem: Super Micro Computer Inc Device [15d9:a811]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fdffc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at fe000000 (32-bit, non-prefetchable) [size=8M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
02:00.0 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01)
Subsystem: Super Micro Computer Inc Device [15d9:ab11]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb60000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at feb40000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at e400 [size=32]
Region 3: Memory at feb1c000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at feb20000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: igb
02:00.1 Ethernet controller [0200]: Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01)
Subsystem: Super Micro Computer Inc Device [15d9:ab11]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at febe0000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at febc0000 (32-bit, non-prefetchable) [size=128K]
Region 2: I/O ports at e800 [size=32]
Region 3: Memory at feb9c000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at feba0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: igb
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 0557:2221 ATEN International Co., Ltd
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 05e3:0719 Genesys Logic, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.7
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/32 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-48squeeze1 Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
The machine boots to serial console, issuing a stream of
[ 7.966320] ------------[ cut here ]------------
[ 7.994141] WARNING: at /build/buildd-linux-2.6_2.6.32-48squeeze1-amd64-qu4MIV/linux-2.6-2.6.32/debian/build/source_amd64_none/fs/sysfs/dir.c:491 sysfs_add_one+0xcc/0xe4()
[ 8.085902] Hardware name: H8DGU
[ 8.105310] sysfs: cannot create duplicate filename '/devices/system/machinecheck/machinecheck1/threshold_bank0'
[ 8.166356] Modules linked in:
[ 8.184729] Pid: 1, comm: swapper Not tainted 2.6.32-5-amd64 #1
[ 8.220397] Call Trace:
[ 8.235105] [<ffffffff81140d73>] ? sysfs_add_one+0xcc/0xe4
[ 8.268556] [<ffffffff81140d73>] ? sysfs_add_one+0xcc/0xe4
[ 8.302039] [<ffffffff8104dfcc>] ? warn_slowpath_common+0x77/0xa3
[ 8.339117] [<ffffffff8104e054>] ? warn_slowpath_fmt+0x51/0x59
[ 8.374633] [<ffffffff81140c9f>] ? sysfs_pathname+0x35/0x3d
[ 8.408588] [<ffffffff81140c9f>] ? sysfs_pathname+0x35/0x3d
[ 8.442543] [<ffffffff81140c9f>] ? sysfs_pathname+0x35/0x3d
[ 8.476500] [<ffffffff81140c9f>] ? sysfs_pathname+0x35/0x3d
[ 8.510457] [<ffffffff81140d73>] ? sysfs_add_one+0xcc/0xe4
[ 8.543892] [<ffffffff811412ef>] ? create_dir+0x4f/0x7c
[ 8.575770] [<ffffffff81141351>] ? sysfs_create_dir+0x35/0x4a
[ 8.610768] [<ffffffff811903b7>] ? kobject_get+0x12/0x17
[ 8.643163] [<ffffffff811904ed>] ? kobject_add_internal+0xcb/0x181
[ 8.680762] [<ffffffff8119074f>] ? kobject_add+0x74/0x7c
[ 8.713183] [<ffffffff811963fa>] ? sprintf+0x51/0x59
[ 8.743523] [<ffffffff810e87d1>] ? __kmalloc+0x12f/0x141
[ 8.775919] [<ffffffff81190264>] ? kobject_create+0x10/0x2c
[ 8.809875] [<ffffffff81190214>] ? kobject_init+0x42/0x82
[ 8.842794] [<ffffffff8119027b>] ? kobject_create+0x27/0x2c
[ 8.876749] [<ffffffff81190785>] ? kobject_create_and_add+0x2e/0x5b
[ 8.914924] [<ffffffff812f620f>] ? threshold_create_bank+0x16f/0x287
[ 8.953614] [<ffffffff81525db1>] ? threshold_init_device+0x40/0x86
[ 8.991258] [<ffffffff81525d71>] ? threshold_init_device+0x0/0x86
[ 9.028351] [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[ 9.063380] [<ffffffff8151e677>] ? kernel_init+0x158/0x1ae
[ 9.096816] [<ffffffff8151e140>] ? early_idt_handler+0x0/0x71
[ 9.131814] [<ffffffff81011baa>] ? child_rip+0xa/0x20
[ 9.162662] [<ffffffff8151e140>] ? early_idt_handler+0x0/0x71
[ 9.197701] [<ffffffff8151e51f>] ? kernel_init+0x0/0x1ae
[ 9.230095] [<ffffffff81011ba0>] ? child_rip+0x0/0x20
[ 9.260934] ---[ end trace 838cc524170d8628 ]---
[ 9.288645] kobject_add_internal failed for threshold_bank0 with -EEXIST, don't try to register things with the same name in the same directory.
[ 9.366333] Pid: 1, comm: swapper Tainted: G W 2.6.32-5-amd64 #1
[ 9.406535] Call Trace:
[ 9.421239] [<ffffffff81190590>] ? kobject_add_internal+0x16e/0x181
[ 9.459369] [<ffffffff8119074f>] ? kobject_add+0x74/0x7c
[ 9.491763] [<ffffffff811963fa>] ? sprintf+0x51/0x59
[ 9.522078] [<ffffffff810e87d1>] ? __kmalloc+0x12f/0x141
[ 9.554474] [<ffffffff81190264>] ? kobject_create+0x10/0x2c
[ 9.588432] [<ffffffff81190214>] ? kobject_init+0x42/0x82
[ 9.621346] [<ffffffff8119027b>] ? kobject_create+0x27/0x2c
[ 9.655305] [<ffffffff81190785>] ? kobject_create_and_add+0x2e/0x5b
[ 9.693425] [<ffffffff812f620f>] ? threshold_create_bank+0x16f/0x287
[ 9.732063] [<ffffffff81525db1>] ? threshold_init_device+0x40/0x86
[ 9.769657] [<ffffffff81525d71>] ? threshold_init_device+0x0/0x86
[ 9.806733] [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[ 9.841728] [<ffffffff8151e677>] ? kernel_init+0x158/0x1ae
[ 9.875164] [<ffffffff8151e140>] ? early_idt_handler+0x0/0x71
[ 9.910160] [<ffffffff81011baa>] ? child_rip+0xa/0x20
[ 9.941048] [<ffffffff8151e140>] ? early_idt_handler+0x0/0x71
[ 9.976045] [<ffffffff8151e51f>] ? kernel_init+0x0/0x1ae
[ 10.008441] [<ffffffff81011ba0>] ? child_rip+0x0/0x20
[ 10.039276] kobject_create_and_add: kobject_add error: -17
[ 10.072196] ------------[ cut here ]------------
which takes a few minutes to transmit during boot (complete boot log
on request).
--- End Message ---