[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#688882: marked as done (linux-image-2.6.32-5-xen-amd64: Dom0 crashes when starting third DomU)

Your message dated Sun, 07 Feb 2016 22:43:09 +0000
with message-id <E1aSY2v-0006KR-UA@deadeye>
and subject line Closing bugs assigned to linux-2.6 package
has caused the Debian Bug report #688884,
regarding linux-image-2.6.32-5-xen-amd64: Dom0 crashes when starting third DomU
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
688884: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=688884
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-2.6
Version: 2.6.32-45
Severity: important
Whenever I start a third domU, my dom0 immediately crashes and reboots. Because it is in colo, I cannot pull a capture of why it's happening. If there is a way to do this without going onsite, I am willing to do that. 

All of the DomU's are using a simple Xen config that looks like this:

bootloader = '/usr/lib/xen-default/bin/pygrub'
vcpus       = '4'
memory      = '512'
root        = '/dev/xvda2 ro'
disk        = [
                  'phy:/dev/mirrorset/test-disk,xvda2,w',
                  'phy:/dev/mirrorset/test-swap,xvda1,w',
              ]
name        = 'test'
vif         = [ 'ip=x.x.x.x,mac=00:16:3E:79:A1:CA' ]
on_poweroff = 'destroy'
on_reboot   = 'restart'
on_crash    = 'restart'

-- Package-specific info:
** Version:
Linux version 2.6.32-5-xen-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 08:57:29 UTC 2012 

** Command line:
placeholder root=UUID=30110ed5-e675-4d0f-bf21-70dc8dbf56f2 ro quiet

** Not tainted

** Kernel log:
[   11.105098] ADDRCONF(NETDEV_UP): peth0: link is not ready
[   11.331582] block drbd0: recounting of set bits took additional 1 jiffies
[ 11.331588] block drbd0: 1608 MB (411738 bits) marked out-of-sync by on disk bit-map. [ 11.331619] block drbd0: Marked additional 388 MB as out-of-sync based on AL. 
[   11.723118] block drbd0: disk( Attaching -> UpToDate )
[   11.758719] block drbd0: conn( StandAlone -> Unconnected )
[ 11.758760] block drbd0: Starting receiver thread (from drbd0_worker [1074]) 
[   11.758841] block drbd0: receiver (re)started
[   11.758848] block drbd0: conn( Unconnected -> WFConnection )
[   11.758905] block drbd0: bind before connect failed, err = -99
[   11.758979] block drbd0: conn( WFConnection -> Disconnecting )
[   11.956022] block drbd0: Discarding network configuration.
[   11.956081] block drbd0: Connection closed
[   11.956089] block drbd0: conn( Disconnecting -> StandAlone )
[   11.956134] block drbd0: receiver terminated
[   11.956138] block drbd0: Terminating drbd0_receiver
[ 12.791332] e1000e: peth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None 
[   12.791337] e1000e 0000:04:00.0: peth0: 10/100 speed: disabling TSO
[   12.792606] ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
[   13.238785] device peth0 entered promiscuous mode
[   13.251960] eth0: port 1(peth0) entering forwarding state
[   13.428648] ip_tables: (C) 2000-2006 Netfilter Core Team
[   23.320012] eth0: no IPv6 routers present
[   23.420007] peth0: no IPv6 routers present
[   68.750960] block drbd0: role( Secondary -> Primary )
[   78.075419]   alloc irq_desc for 2251 on node -1
[   78.075424]   alloc kstat_irqs on node -1
[   78.221963]   alloc irq_desc for 2250 on node -1
[   78.221967]   alloc kstat_irqs on node -1
[   78.255923] device vif4.0 entered promiscuous mode
[   78.259688] eth0: port 2(vif4.0) entering forwarding state
[   78.330986] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 78.331523] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use [ 78.331526] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or 
[   78.331529] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
[ 78.368947] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 80.539376] blkback: ring-ref 8, event-channel 23, protocol 1 (x86_64-abi) 
[   80.539461]   alloc irq_desc for 2249 on node -1
[   80.539465]   alloc kstat_irqs on node -1
[ 80.548719] blkback: ring-ref 768, event-channel 24, protocol 1 (x86_64-abi) 
[   80.548738]   alloc irq_desc for 2248 on node -1
[   80.548741]   alloc kstat_irqs on node -1
[   80.562789]   alloc irq_desc for 2247 on node -1
[   80.562798]   alloc kstat_irqs on node -1
[   89.060028] vif4.0: no IPv6 routers present
[   90.548501]   alloc irq_desc for 2246 on node -1
[   90.548507]   alloc kstat_irqs on node -1
[   90.672853]   alloc irq_desc for 2245 on node -1
[   90.672859]   alloc kstat_irqs on node -1
[   90.711170] device vif5.0 entered promiscuous mode
[   90.714890] eth0: port 3(vif5.0) entering forwarding state
[ 90.732431] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 90.735680] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 90.735687] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 90.768156] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 90.768163] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 90.773017] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 90.773022] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 90.773026] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. 
[   95.756937] blkback: ring-ref 8, event-channel 9, protocol 1 (x86_64-abi)
[   95.757011]   alloc irq_desc for 2244 on node -1
[   95.757014]   alloc kstat_irqs on node -1
[ 96.230019] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_64-abi) 
[   96.230064]   alloc irq_desc for 2243 on node -1
[   96.230067]   alloc kstat_irqs on node -1
[  101.696023] vif5.0: no IPv6 routers present
[  116.956808]   alloc irq_desc for 2242 on node -1
[  116.956812]   alloc kstat_irqs on node -1
[ 1260.717904] eth0: port 2(vif4.0) entering disabled state
[ 1260.732908] eth0: port 2(vif4.0) entering disabled state
[ 1260.786846] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1260.786852] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1260.786856] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1260.789892] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1260.789898] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. 
[ 1272.119082] eth0: port 3(vif5.0) entering disabled state
[ 1272.138168] eth0: port 3(vif5.0) entering disabled state
[ 1272.181421] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1272.181427] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1272.184195] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1272.187554] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. 
[ 1283.864843] device vif6.0 entered promiscuous mode
[ 1283.868442] eth0: port 2(vif6.0) entering forwarding state
[ 1283.888858] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1284.887429] blkback: ring-ref 8, event-channel 23, protocol 1 (x86_64-abi) [ 1284.918434] blkback: ring-ref 770, event-channel 25, protocol 1 (x86_64-abi) 
[ 1294.736017] vif6.0: no IPv6 routers present
[ 1303.422711] device vif7.0 entered promiscuous mode
[ 1303.426581] eth0: port 3(vif7.0) entering forwarding state
[ 1303.443652] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1303.447049] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1303.447055] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1303.451053] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1303.451058] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1303.454163] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1303.454169] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. [ 1303.454173] physdev match: using --physdev-out in the OUTPUT, FORWARD and POSTROUTING chains for non-bridged traffic is not supported anymore. 
[ 1309.453796] blkback: ring-ref 8, event-channel 9, protocol 1 (x86_64-abi)
[ 1309.462000] blkback: ring-ref 9, event-channel 10, protocol 1 (x86_64-abi) 
[ 1314.216047] vif7.0: no IPv6 routers present

** Model information
sys_vendor: Supermicro
product_name: X7DVL-L
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: Phoenix Technologies LTD
bios_version: 2.0b
board_vendor: Supermicro
board_name: X7DVL-L
board_version: PCB Version

** Loaded modules:
Module                  Size  Used by
xt_tcpudp               2319  1
nf_conntrack_ipv4       9833  3
nf_defrag_ipv4          1139  1 nf_conntrack_ipv4
xt_state                1303  3
nf_conntrack           46519  2 nf_conntrack_ipv4,xt_state
xt_physdev              1508  7
iptable_filter          2258  1
ip_tables              13915  1 iptable_filter
x_tables               12845  4 xt_tcpudp,xt_state,xt_physdev,ip_tables
drbd                  193296  2
lru_cache               5042  1 drbd
cn                      4563  1 drbd
bridge                 39678  0
stp                     1440  1 bridge
xen_evtchn              4339  3
xenfs                   9600  1
loop                   11799  0
snd_pcm                60535  0
snd_timer              15598  1 snd_pcm
snd                    46526  2 snd_pcm,snd_timer
soundcore               4598  1 snd
snd_page_alloc          6249  1 snd_pcm
ioatdma                34876  15
shpchp                 26248  0
i2c_i801                7830  0
pci_hotplug            21587  1 shpchp
i2c_core               15819  1 i2c_i801
dca                     3761  1 ioatdma
i5000_edac              7284  0
edac_core              29261  3 i5000_edac
i5k_amb                 4439  0
rng_core                3006  0
processor              35941  0
evdev                   7352  2
acpi_processor          5087  1 processor,[permanent]
pcspkr                  1699  0
serio_raw               3752  0
container               2389  0
button                  4650  0
ext4                  288350  1
mbcache                 5050  1 ext4
jbd2                   67111  1 ext4
crc16                   1319  1 ext4
dm_mod                 53946  17
sd_mod                 29921  4
crc_t10dif              1276  1 sd_mod
ata_generic             3239  0
uhci_hcd               18521  0
ata_piix               21124  3
libata                133760  2 ata_generic,ata_piix
ehci_hcd               32097  0
scsi_mod              126725  2 sd_mod,libata
usbcore               123122  3 uhci_hcd,ehci_hcd
nls_base                6377  1 usbcore
thermal                11674  0
e1000e                124836  0
thermal_sys            11942  2 processor,thermal

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 5000V Chipset Memory Controller Hub [8086:25d4] (rev b1) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 0
	Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Intel Corporation 5000 Series Chipset PCI Express x8 Port 2-3 [8086:25f7] (rev b1) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=05, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: df100000-df2fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- 
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation 5000 Series Chipset DMA Engine [8086:1a38] (rev b1) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
	Interrupt: pin A routed to IRQ 2254
	Region 0: Memory at fe700000 (64-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ioatdma
00:10.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Kernel driver in use: i5000_edac
00:10.1 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.2 Host bridge [0600]: Intel Corporation 5000 Series Chipset FSB Registers [8086:25f0] (rev b1) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:11.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f1] (rev b1) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:13.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset Reserved Registers [8086:25f3] (rev b1) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:15.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f5] (rev b1) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:16.0 Host bridge [0600]: Intel Corporation 5000 Series Chipset FBD Registers [8086:25f6] (rev b1) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1d.0 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 [8086:2688] (rev 09) (prog-if 00 [UHCI]) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 4: I/O ports at 1800 [size=32]
	Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 [8086:2689] (rev 09) (prog-if 00 [UHCI]) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 1820 [size=32]
	Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller [8086:268c] (rev 09) (prog-if 20 [EHCI]) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at df500000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d9) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
	Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: df000000-df0fffff
	Prefetchable memory behind bridge: 00000000de000000-00000000deffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- 
	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller [8086:2670] (rev 09) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller [8086:2680] (rev 09) (prog-if 8f [Master SecP SecO PriP PriO]) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 1860 [size=8]
	Region 1: I/O ports at 1854 [size=4]
	Region 2: I/O ports at 1858 [size=8]
	Region 3: I/O ports at 1850 [size=4]
	Region 4: I/O ports at 1840 [size=16]
	Region 5: Memory at df500400 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller [8086:269b] (rev 09) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at 1100 [size=32]
	Kernel driver in use: i801_smbus
01:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Upstream Port [8086:3500] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=01, secondary=02, subordinate=04, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: df200000-df2fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- 
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
01:00.3 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express to PCI-X Bridge [8086:350c] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=01, secondary=05, subordinate=05, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- 
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
02:00.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E1 [8086:3510] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=02, secondary=03, subordinate=03, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- 
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
02:02.0 PCI bridge [0604]: Intel Corporation 6311ESB/6321ESB PCI Express Downstream Port E3 [8086:3518] (rev 01) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=02, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: df200000-df2fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- 
	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
04:00.0 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) [8086:1096] (rev 01) 
	Subsystem: Super Micro Computer Inc Device [15d9:1096]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 2256
	Region 0: Memory at df220000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at df200000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at 2000 [size=32]
	[virtual] Expansion ROM at d0000000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: e1000e
04:00.1 Ethernet controller [0200]: Intel Corporation 80003ES2LAN Gigabit Ethernet Controller (Copper) [8086:1096] (rev 01) 
	Subsystem: Super Micro Computer Inc Device [15d9:1096]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 2255
	Region 0: Memory at df260000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at df240000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at 2020 [size=32]
	[virtual] Expansion ROM at d0010000 [disabled] [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: e1000e
06:01.0 VGA compatible controller [0300]: XGI Technology Inc. (eXtreme Graphics Innovation) Z7/Z9 (XG20 core) [18ca:0020] (prog-if 00 [VGA controller]) 
	Subsystem: Super Micro Computer Inc Device [15d9:b280]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 
	BIST result: 00
	Region 0: Memory at de000000 (32-bit, prefetchable) [size=16M]
	Region 1: Memory at df000000 (32-bit, non-prefetchable) [size=256K]
	Region 2: I/O ports at 3000 [size=128]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>


** USB devices:
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.5
  APT prefers stable
  APT policy: (500, 'stable')
Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-xen-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-xen-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools 0.98.8 tools for generating an initramfs 
ii  linux-base                    2.6.32-45  Linux image base package
ii module-init-tools 3.12-2 tools for managing Linux kernel mo 

Versions of packages linux-image-2.6.32-5-xen-amd64 recommends:
ii firmware-linux-free 2.6.32-45 Binary firmware for various driver 

Versions of packages linux-image-2.6.32-5-xen-amd64 suggests:
pn  grub                          <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-xen-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
ii  xen-hypervisor-4.0-amd64 [xen 4.0.1-5.4  The Xen Hypervisor on AMD64

-- debconf information:
linux-image-2.6.32-5-xen-amd64/postinst/depmod-error-initrd-2.6.32-5-xen-amd64: false 

linux-image-2.6.32-5-xen-amd64/postinst/ignoring-do-bootloader-2.6.32-5-xen-amd64:
linux-image-2.6.32-5-xen-amd64/prerm/removing-running-kernel-2.6.32-5-xen-amd64: true 

linux-image-2.6.32-5-xen-amd64/postinst/missing-firmware-2.6.32-5-xen-amd64:

--- End Message ---
--- Begin Message --- 
Version: 3.4.1-1~experimental.1+rm

Debian 6.0 Long Term Support has now ended, and the 'linux-2.6' source
package will no longer be updated.  This bug is being closed on the
assumption that it does not affect the kernel versions in newer Debian
releases.

If you can still reproduce this bug in a newer release, please reopen
the bug report and reassign it to 'src:linux' and the affected version
of the package.  You can find the package version for the running
kernel by running:

    uname -v

or the versions of all installed kernel packages by running:

    dpkg -l 'linux-image-[34]*' | grep ^.i

and looking at the third column.

I apologise that we weren't able to provide a specific resolution for
this bug.

Ben.

-- 
Ben Hutchings - Debian developer, member of Linux kernel and LTS teams

--- End Message ---
Reply to: