--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-686: ethernet device eth0 (module atl1c) fails. After module reload device is not present any more.
- From: erik <erik.geiger@gmx.net>
- Date: Tue, 20 Dec 2011 13:44:11 +0100
- Message-id: <20111220124411.4772.75822.reportbug@mini.heimat.lan>
Package: linux-2.6
Version: 2.6.32-39
Severity: important
Description:
When using wired connection after a short while ethernet connection hangs. After unloading atl1c and reloading module it may work again. Mostly it ends up with a error message ( kernel:[ 371.156342] Disabling IRQ #19 kernel:[ 774.643828] do_IRQ: 1.177 No irq handler for vector (irq -1)) and there is no more eth device present. Only reboot changes this.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-39) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Thu Nov 3 04:23:54 UTC 2011
** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-5-686 root=/dev/mapper/vg01-root ro quiet acpi_osi=Linux usbcore.autosuspend=1
** Not tainted
** Kernel log:
[ 48.179535] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 48.181362] EXT3 FS on dm-7, internal journal
[ 48.181378] EXT3-fs: mounted filesystem with ordered data mode.
[ 98.328981] hda-intel: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
[ 134.660149] atl1c 0000:01:00.0: PCI INT A disabled
[ 158.108419] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 158.108456] atl1c 0000:01:00.0: setting latency timer to 64
[ 158.231819] atl1c 0000:01:00.0: version 1.0.0.2-NAPI
[ 158.403000] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
[ 158.404150] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 159.872662] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 159.873276] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 160.832578] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[ 162.373469] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 170.364044] eth0: no IPv6 routers present
[ 371.156082] irq 19: nobody cared (try booting with the "irqpoll" option)
[ 371.156099] Pid: 0, comm: swapper Not tainted 2.6.32-5-686 #1
[ 371.156108] Call Trace:
[ 371.156125] [<c106d619>] ? __report_bad_irq+0x24/0x69
[ 371.156138] [<c106d620>] ? __report_bad_irq+0x2b/0x69
[ 371.156150] [<c106d745>] ? note_interrupt+0xe7/0x13e
[ 371.156163] [<c106dc73>] ? handle_fasteoi_irq+0x7a/0x97
[ 371.156177] [<c1004dd7>] ? handle_irq+0x17/0x1b
[ 371.156189] [<c1004659>] ? do_IRQ+0x38/0x89
[ 371.156201] [<c10037f0>] ? common_interrupt+0x30/0x38
[ 371.156249] [<f80bf24b>] ? acpi_idle_enter_simple+0x117/0x151 [processor]
[ 371.156264] [<c11c6d25>] ? cpuidle_idle_call+0x68/0xbb
[ 371.156276] [<c1002377>] ? cpu_idle+0x89/0xa2
[ 371.156290] [<c13bf806>] ? start_kernel+0x318/0x31d
[ 371.156297] handlers:
[ 371.156303] [<f827e931>] (usb_hcd_irq+0x0/0x71 [usbcore])
[ 371.156342] Disabling IRQ #19
[ 380.336164] atl1c 0000:01:00.0: PCI INT A disabled
[ 417.224126] wlan0: deauthenticating from 62:67:f0:71:a1:57 by local choice (reason=3)
[ 418.949666] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 421.191423] wlan0: direct probe to AP 62:67:f0:5c:f6:db (try 1)
[ 421.195997] wlan0: direct probe responded
[ 421.196048] wlan0: authenticate with AP 62:67:f0:5c:f6:db (try 1)
[ 421.233859] wlan0: authenticated
[ 421.233939] wlan0: associate with AP 62:67:f0:5c:f6:db (try 1)
[ 421.240544] wlan0: RX AssocResp from 62:67:f0:5c:f6:db (capab=0x431 status=0 aid=1)
[ 421.240557] wlan0: associated
[ 421.250639] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 431.956041] wlan0: no IPv6 routers present
[ 774.643752] atl1c 0000:01:00.0: enabling device (0000 -> 0002)
[ 774.643779] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 774.643815] atl1c 0000:01:00.0: setting latency timer to 64
[ 774.643828] do_IRQ: 1.177 No irq handler for vector (irq -1)
[ 774.897175] atl1c 0000:01:00.0: PCI INT A disabled
[ 774.897216] atl1c: probe of 0000:01:00.0 failed with error -5
[ 831.963529] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 831.963567] atl1c 0000:01:00.0: setting latency timer to 64
[ 832.212181] atl1c 0000:01:00.0: PCI INT A disabled
[ 832.212215] atl1c: probe of 0000:01:00.0 failed with error -5
** Model information
not available
** Loaded modules:
Module Size Used by
atl1c 23864 0
sha256_generic 10748 2
cbc 2047 1
dm_crypt 9264 1
cdc_subset 1593 0
cdc_ether 2633 0
usbnet 9527 2 cdc_subset,cdc_ether
mii 2714 1 usbnet
aes_i586 6816 4
aes_generic 25738 1 aes_i586
acpi_cpufreq 4951 1
cpufreq_stats 1997 0
parport_pc 15799 0
cpufreq_conservative 4018 0
ppdev 4058 0
lp 5570 0
cpufreq_powersave 602 0
cpufreq_userspace 1480 0
parport 22554 3 parport_pc,ppdev,lp
fuse 44268 1
ipt_LOG 3570 1
ipt_REJECT 1517 2
xt_tcpudp 1743 6
xt_state 927 1
iptable_filter 1790 1
ipt_MASQUERADE 1134 3
iptable_nat 3551 1
nf_nat 10568 2 ipt_MASQUERADE,iptable_nat
nf_conntrack_ipv4 7597 4 iptable_nat,nf_nat
nf_conntrack 38075 5 xt_state,ipt_MASQUERADE,iptable_nat,nf_nat,nf_conntrack_ipv4
nf_defrag_ipv4 779 1 nf_conntrack_ipv4
ip_tables 7706 2 iptable_filter,iptable_nat
x_tables 8327 7 ipt_LOG,ipt_REJECT,xt_tcpudp,xt_state,ipt_MASQUERADE,iptable_nat,ip_tables
ext2 46245 1
loop 9769 0
arc4 974 2
ecb 1405 2
snd_hda_codec_realtek 163318 1
uvcvideo 45554 0
snd_hda_intel 16823 2
videodev 25605 1 uvcvideo
ath9k 238477 0
joydev 6739 0
v4l1_compat 10250 2 uvcvideo,videodev
usb_storage 30905 0
mac80211 123586 1 ath9k
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
i915 223022 2
ath 6018 1 ath9k
snd_hwdep 4054 1 snd_hda_codec
drm_kms_helper 18569 1 i915
snd_pcm 47226 2 snd_hda_intel,snd_hda_codec
cfg80211 87637 3 ath9k,mac80211,ath
snd_seq 35463 0
drm 111992 3 i915,drm_kms_helper
uhci_hcd 16057 0
eeepc_laptop 10448 0
ehci_hcd 28693 0
snd_timer 12270 2 snd_pcm,snd_seq
rfkill 10264 2 cfg80211,eeepc_laptop
psmouse 44809 0
snd_seq_device 3673 1 snd_seq
i2c_algo_bit 3497 1 i915
usbcore 98969 8 cdc_subset,cdc_ether,usbnet,uvcvideo,usb_storage,uhci_hcd,ehci_hcd
i2c_core 12787 5 videodev,i915,drm_kms_helper,drm,i2c_algo_bit
wmi 3575 0
pci_hotplug 18545 1 eeepc_laptop
nls_base 4541 1 usbcore
snd 34423 12 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
evdev 5609 23
video 14605 1 i915
serio_raw 2916 0
led_class 1757 1 ath9k
output 1204 1 video
battery 3782 0
ac 1640 0
processor 26327 3 acpi_cpufreq
button 3598 1 i915
soundcore 3450 1 snd
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
ext3 94396 6
jbd 32317 1 ext3
mbcache 3762 2 ext2,ext3
dm_mod 46234 25 dm_crypt
sd_mod 26005 3
crc_t10dif 1012 1 sd_mod
ahci 27410 2
thermal 9206 0
libata 115869 1 ahci
thermal_sys 9378 3 video,processor,thermal
scsi_mod 104853 3 usb_storage,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010]
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012]
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:8437]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7f00000-f7ffffff
Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 16
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=32]
Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 11
Region 4: I/O ports at 0400 [size=32]
01:00.0 Ethernet controller [0200]: Atheros Communications AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8468]
Physical Slot: eeepc-wifi
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 19
Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave Device [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0525:a4a2 Netchip Technology, Inc. Linux-USB Ethernet/RNDIS Gadget
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13d3:5702 IMC Networks UVC VGA Webcam
Bus 001 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/2 CPU cores)
Locale: LANG=de_CH.UTF-8, LC_CTYPE=de_CH.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-39 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
pn firmware-linux-free <none> (no description available)
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---