--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-686: Ethernet stops working after a short time
- From: "Axel K. Stammler" <axst@users.sourceforge.net>
- Date: Sat, 17 Mar 2012 22:13:13 +0100
- Message-id: <20120317211313.3500.11697.reportbug@bamboo.clematis>
Package: linux-2.6
Version: 2.6.32-41
Severity: normal
…especially under load. Restarting networking (via the Network Manager applet) or
unplugging the ethernet cable do not help.
Moreover, the "Hardware Monitor" Gnome applet does not show any
visible bar for eth0 even though it correctly reports throughput, so it looks as if the
driver reports the maximum possible throughput incorrectly.
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-41) (ben@decadent.org.uk) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Mon Jan 16 16:04:25 UTC 2012
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=c56411a1-de7e-4aa6-b0ba-634877727827 ro quiet
** Not tainted
** Kernel log:
[ 13.321814] EXT3 FS on sda5, internal journal
[ 13.321825] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.387524] kjournald starting. Commit interval 5 seconds
[ 13.387802] EXT3 FS on sda6, internal journal
[ 13.387812] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.570020] kjournald starting. Commit interval 5 seconds
[ 13.570530] EXT3 FS on sda13, internal journal
[ 13.570541] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.637909] kjournald starting. Commit interval 5 seconds
[ 13.638189] EXT3 FS on sda9, internal journal
[ 13.638199] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.720304] kjournald starting. Commit interval 5 seconds
[ 13.720580] EXT3 FS on sda12, internal journal
[ 13.720590] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.827726] kjournald starting. Commit interval 5 seconds
[ 13.828054] EXT3 FS on sda10, internal journal
[ 13.828065] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.251542] kjournald starting. Commit interval 5 seconds
[ 14.251851] EXT3 FS on sda11, internal journal
[ 14.251861] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.781238] fuse init (API version 7.13)
[ 17.744528] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input10
[ 18.341415] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 18.382444] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
[ 18.383062] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 21.333299] apm: BIOS not found.
[ 22.165717] Bluetooth: Core ver 2.15
[ 22.166202] NET: Registered protocol family 31
[ 22.166208] Bluetooth: HCI device and connection manager initialized
[ 22.166216] Bluetooth: HCI socket layer initialized
[ 22.286485] Bluetooth: L2CAP ver 2.14
[ 22.286493] Bluetooth: L2CAP socket layer initialized
[ 22.296385] Bluetooth: RFCOMM TTY layer initialized
[ 22.296401] Bluetooth: RFCOMM socket layer initialized
[ 22.296407] Bluetooth: RFCOMM ver 1.11
[ 22.376456] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 22.376464] Bluetooth: BNEP filters: protocol multicast
[ 22.431329] Bridge firewalling registered
[ 22.587854] Bluetooth: SCO (Voice Link) ver 0.6
[ 22.587861] Bluetooth: SCO socket layer initialized
[ 23.581500] lp: driver loaded but no devices found
[ 23.715060] ppdev: user-space parallel port driver
[ 31.739698] CPU0 attaching NULL sched-domain.
[ 31.739718] CPU1 attaching NULL sched-domain.
[ 31.739731] CPU2 attaching NULL sched-domain.
[ 31.739752] CPU3 attaching NULL sched-domain.
[ 31.792194] CPU0 attaching sched-domain:
[ 31.792208] domain 0: span 0,2 level SIBLING
[ 31.792219] groups: group c280370c cpus 0 (cpu_power = 589) group c2a0370c cpus 2 (cpu_power = 589)
[ 31.792244] domain 1: span 0,2 level MC
[ 31.792253] groups: group c2803778 cpus 0,2 (cpu_power = 1178)
[ 31.792270] domain 2: span 0-3 level CPU
[ 31.792278] groups: group c28037e4 cpus 0,2 (cpu_power = 1178) group c29037e4 cpus 1,3 (cpu_power = 1178)
[ 31.792305] CPU1 attaching sched-domain:
[ 31.792313] domain 0: span 1,3 level SIBLING
[ 31.792321] groups: group c290370c cpus 1 (cpu_power = 589) group c2b0370c cpus 3 (cpu_power = 589)
[ 31.792344] domain 1: span 1,3 level MC
[ 31.792352] groups: group c2903778 cpus 1,3 (cpu_power = 1178)
[ 31.792369] domain 2: span 0-3 level CPU
[ 31.792377] groups: group c29037e4 cpus 1,3 (cpu_power = 1178) group c28037e4 cpus 0,2 (cpu_power = 1178)
[ 31.792402] CPU2 attaching sched-domain:
[ 31.792410] domain 0: span 0,2 level SIBLING
[ 31.792419] groups: group c2a0370c cpus 2 (cpu_power = 589) group c280370c cpus 0 (cpu_power = 589)
[ 31.792441] domain 1: span 0,2 level MC
[ 31.792450] groups: group c2803778 cpus 0,2 (cpu_power = 1178)
[ 31.792466] domain 2: span 0-3 level CPU
[ 31.792474] groups: group c28037e4 cpus 0,2 (cpu_power = 1178) group c29037e4 cpus 1,3 (cpu_power = 1178)
[ 31.792498] CPU3 attaching sched-domain:
[ 31.792509] domain 0: span 1,3 level SIBLING
[ 31.792521] groups: group c2b0370c cpus 3 (cpu_power = 589) group c290370c cpus 1 (cpu_power = 589)
[ 31.792544] domain 1: span 1,3 level MC
[ 31.792552] groups: group c2903778 cpus 1,3 (cpu_power = 1178)
[ 31.792569] domain 2: span 0-3 level CPU
[ 31.792577] groups: group c29037e4 cpus 1,3 (cpu_power = 1178) group c28037e4 cpus 0,2 (cpu_power = 1178)
[ 161.306116] wlan0: direct probe to AP 94:44:52:97:c4:37 (try 1)
[ 161.311405] wlan0: direct probe responded
[ 161.311416] wlan0: authenticate with AP 94:44:52:97:c4:37 (try 1)
[ 161.313400] wlan0: authenticated
[ 161.313451] wlan0: associate with AP 94:44:52:97:c4:37 (try 1)
[ 161.317577] wlan0: RX AssocResp from 94:44:52:97:c4:37 (capab=0x411 status=0 aid=1)
[ 161.317588] wlan0: associated
[ 161.326944] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 161.442543] padlock: VIA PadLock not detected.
[ 171.504048] wlan0: no IPv6 routers present
[ 180.183374] tun: Universal TUN/TAP device driver, 1.6
[ 180.183382] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 190.332044] tap0: no IPv6 routers present
[ 2282.289414] atl1c 0000:01:00.0: PCI INT A disabled
[ 2388.994408] atl1c 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 2388.994436] atl1c 0000:01:00.0: setting latency timer to 64
[ 2389.118793] atl1c 0000:01:00.0: version 1.0.0.2-NAPI
[ 2389.144552] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
[ 2389.145912] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 2422.762467] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 2422.762853] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 2422.832917] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[ 2425.740841] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
[ 2426.196857] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Down
[ 2433.072018] eth0: no IPv6 routers present
[ 2433.318781] atl1c 0000:01:00.0: atl1c: eth0 NIC Link is Up<100 Mbps Full Duplex>
** Model information
not available
** Loaded modules:
Module Size Used by
atl1c 23864 0
tun 8772 2
aes_i586 6816 2
aes_generic 25738 1 aes_i586
acpi_cpufreq 4951 1
cpufreq_stats 1997 0
cpufreq_userspace 1480 0
cpufreq_conservative 4018 0
parport_pc 15799 0
cpufreq_powersave 602 0
ppdev 4058 0
lp 5570 0
parport 22554 3 parport_pc,ppdev,lp
sco 5885 2
bridge 33031 0
stp 996 1 bridge
bnep 7452 2
rfcomm 25199 0
l2cap 21721 6 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36319 6 sco,bnep,rfcomm,l2cap
binfmt_misc 4907 1
uinput 4796 1
fuse 44268 1
loop 9769 0
snd_hda_codec_realtek 163378 1
snd_hda_intel 16823 0
snd_hda_codec 46002 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4054 1 snd_hda_codec
snd_pcm_oss 28671 0
snd_mixer_oss 10461 1 snd_pcm_oss
arc4 974 2
snd_pcm 47226 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
ecb 1405 2
snd_seq_midi 3576 0
i915 223022 3
snd_rawmidi 12513 1 snd_seq_midi
snd_seq_midi_event 3684 1 snd_seq_midi
snd_seq 35463 2 snd_seq_midi,snd_seq_midi_event
drm_kms_helper 18569 1 i915
ath9k 238469 0
snd_timer 12270 2 snd_pcm,snd_seq
uvcvideo 45574 0
mac80211 123586 1 ath9k
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
drm 111992 4 i915,drm_kms_helper
videodev 25605 1 uvcvideo
snd 34423 11 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
psmouse 44809 0
i2c_algo_bit 3493 1 i915
ath 6018 1 ath9k
v4l1_compat 10250 2 uvcvideo,videodev
cfg80211 87645 3 ath9k,mac80211,ath
rfkill 10264 4 bluetooth,cfg80211
i2c_i801 6462 0
evdev 5609 16
pcspkr 1207 0
serio_raw 2916 0
i2c_core 12787 6 i915,drm_kms_helper,drm,videodev,i2c_algo_bit,i2c_i801
led_class 1757 1 ath9k
wmi 3575 0
video 14605 1 i915
ac 1640 0
output 1204 1 video
soundcore 3450 1 snd
button 3598 1 i915
battery 3782 0
snd_page_alloc 5045 2 snd_hda_intel,snd_pcm
processor 26327 3 acpi_cpufreq
ext3 94396 9
jbd 32401 1 ext3
mbcache 3762 1 ext3
sd_mod 26013 11
crc_t10dif 1012 1 sd_mod
uhci_hcd 16057 0
ahci 27750 10
libata 115889 1 ahci
ehci_hcd 28689 0
scsi_mod 105001 2 sd_mod,libata
usbcore 99329 4 uvcvideo,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
thermal 9206 0
thermal_sys 9378 3 video,processor,thermal
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
#NetworkManager#iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
link/ether 74:2f:68:4f:a0:da brd ff:ff:ff:ff:ff:ff
inet 192.168.233.113/24 brd 192.168.233.255 scope global wlan0
inet6 fe80::762f:68ff:fe4f:a0da/64 scope link
valid_lft forever preferred_lft forever
4: pan0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN
link/ether 9e:f9:55:7f:5b:93 brd ff:ff:ff:ff:ff:ff
5: tap0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UNKNOWN qlen 100
link/ether 36:d0:e3:34:eb:7d brd ff:ff:ff:ff:ff:ff
inet 10.4.0.9/24 brd 10.4.0.255 scope global tap0
inet6 fe80::34d0:e3ff:fe34:eb7d/64 scope link
valid_lft forever preferred_lft forever
6: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 54:04:a6:24:bf:77 brd ff:ff:ff:ff:ff:ff
inet6 fe80::5604:a6ff:fe24:bf77/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 352192 6158 0 0 0 0 0 0 352192 6158 0 0 0 0 0 0
wlan0:88165688 101856 0 0 0 0 0 0 7497704 46917 0 0 0 0 0 0
pan0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
tap0: 640416 14420 0 0 0 0 0 0 835644 16055 0 0 0 0 0 0
eth0: 759571 8926 152 0 0 152 0 110 800819 7693 0 0 0 0 5 0
*** Protocol statistics:
Ip:
114247 total packets received
146 with invalid addresses
0 forwarded
0 incoming packets discarded
109159 incoming packets delivered
77363 requests sent out
112 outgoing packets dropped
44 dropped because of missing route
72 fragments received ok
240 fragments created
Icmp:
33083 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 5998
echo requests: 7102
echo replies: 19983
41272 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 6002
echo request: 28168
echo replies: 7102
IcmpMsg:
InType0: 19983
InType3: 5998
InType8: 7102
OutType0: 7102
OutType3: 6002
OutType8: 28168
Tcp:
259 active connections openings
1 passive connection openings
119 failed connection attempts
3 connection resets received
2 connections established
60470 segments received
19004 segments send out
142 segments retransmited
0 bad segments received.
9 resets sent
Udp:
15414 packets received
156 packets to unknown port received.
0 packet receive errors
16973 packets sent
UdpLite:
TcpExt:
29 packets pruned from receive queue because of socket buffer overrun
77 TCP sockets finished time wait in fast timer
145 delayed acks sent
Quick ack mode was activated 3 times
37 packets directly queued to recvmsg prequeue.
73 bytes directly received in process context from prequeue
56757 packet headers predicted
488 acknowledgments not containing data payload received
1776 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
2 congestion windows recovered without slow start after partial ack
4 TCP data loss events
1 fast retransmits
2 forward retransmits
71 other TCP timeouts
551 packets collapsed in receive queue due to low socket buffer
3 DSACKs sent for old packets
5 DSACKs received
3 connections reset due to early user close
65 connections aborted due to timeout
TCPDSACKIgnoredOld: 3
TCPSackShiftFallback: 26
IpExt:
InMcastPkts: 538
OutMcastPkts: 430
InBcastPkts: 41
InOctets: 87650350
OutOctets: 7337283
InMcastOctets: 255067
OutMcastOctets: 228106
InBcastOctets: 2099
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation N10 Family DMI Bridge [8086:a010] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a011] (rev 02) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7e00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at dc00 [size=8]
Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at f7d00000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation N10 Family Integrated Graphics Controller [8086:a012] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ac]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f7e80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:84d3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f7cf8000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: 80000000-801fffff
Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 4 [8086:27d6] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7f00000-f7ffffff
Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #1 [8086:27c8] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at d400 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at d480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at d800 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 02) (prog-if 00 [UHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 20
Region 4: I/O ports at d880 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 02) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7cf7c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev e2) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation NM10 Family LPC Controller [8086:27bc] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation N10/ICH7 Family SATA AHCI Controller [8086:27c1] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at d080 [size=8]
Region 1: I/O ports at d000 [size=4]
Region 2: I/O ports at cc00 [size=8]
Region 3: I/O ports at c880 [size=4]
Region 4: I/O ports at c800 [size=32]
Region 5: Memory at f7cf7800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation N10/ICH 7 Family SMBus Controller [8086:27da] (rev 02)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 0400 [size=32]
01:00.0 Ethernet controller [0200]: Atheros Communications AR8152 v2.0 Fast Ethernet [1969:2062] (rev c1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8468]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7fc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01)
Subsystem: AzureWave Device [1a3b:1089]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at fbff0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 13d3:5711 IMC Networks
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/4 CPU cores)
Locale: LANG=en_IE.utf8, LC_CTYPE=en_IE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-41 Linux image base package
ii module-init-tools 3.12-2+b1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-41 Binary firmware for various driver
ii libc6-i686 2.11.3-3 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
ii firmware-linux 0.28+squeeze1 Binary firmware for various driver
ii firmware-linux-nonfree 0.28+squeeze1 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-686/prerm/removing-running-kernel-2.6.32-5-686: true
linux-image-2.6.32-5-686/postinst/depmod-error-initrd-2.6.32-5-686: false
linux-image-2.6.32-5-686/postinst/ignoring-do-bootloader-2.6.32-5-686:
linux-image-2.6.32-5-686/postinst/missing-firmware-2.6.32-5-686:
--- End Message ---