[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#580028: marked as done (linux-image-2.6.32-4-686: Can not mount cdroms, no dmesg output)

Your message dated Sun, 07 Feb 2016 22:43:07 +0000
with message-id <E1aSY2t-0006DV-Hp@deadeye>
and subject line Closing bugs assigned to linux-2.6 package
has caused the Debian Bug report #580028,
regarding linux-image-2.6.32-4-686: Can not mount cdroms, no dmesg output
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
580028: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=580028
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: linux-2.6
Version: 2.6.32-11
Severity: normal
Tags: sid


Hi, I'm opening a new report as requested in #577534. My cdrom is working again (I can boot from a cd live)

But I can't mount the same cdrom which can boot.

No messages in dmesg.

# dmesg -c
# LANG=C mount /dev/cdrom1 /media/cdrom
mount: /dev/sr0: unknown device
# LANG=C mount -t iso9660 /dev/cdrom1 /media/cdrom
mount: no medium found on /dev/sr0
# isoinfo -f -i /dev/scd0 
Errno: 5 (Input/output error), test unit ready scsi sendcmd: no error
CDB:  00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 02 00 00 00 00 0E 00 00 00 00 3A 00 00 00
Sense Key: 0x2 Not Ready, Segment 0
Sense Code: 0x3A Qual 0x00 (medium not present) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.000s timeout 20s
isoinfo: No such file or directory. Unable to open /dev/scd0
# ls -l /sys/block/ 
total 0
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-0 -> ../devices/virtual/block/dm-0
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-1 -> ../devices/virtual/block/dm-1
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-10 -> ../devices/virtual/block/dm-10
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-11 -> ../devices/virtual/block/dm-11
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-12 -> ../devices/virtual/block/dm-12
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-13 -> ../devices/virtual/block/dm-13
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-14 -> ../devices/virtual/block/dm-14
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-15 -> ../devices/virtual/block/dm-15
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-16 -> ../devices/virtual/block/dm-16
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-17 -> ../devices/virtual/block/dm-17
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-18 -> ../devices/virtual/block/dm-18
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-19 -> ../devices/virtual/block/dm-19
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-2 -> ../devices/virtual/block/dm-2
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-20 -> ../devices/virtual/block/dm-20
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-21 -> ../devices/virtual/block/dm-21
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-22 -> ../devices/virtual/block/dm-22
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-23 -> ../devices/virtual/block/dm-23
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-24 -> ../devices/virtual/block/dm-24
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-25 -> ../devices/virtual/block/dm-25
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-26 -> ../devices/virtual/block/dm-26
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-27 -> ../devices/virtual/block/dm-27
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-28 -> ../devices/virtual/block/dm-28
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-29 -> ../devices/virtual/block/dm-29
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-3 -> ../devices/virtual/block/dm-3
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-4 -> ../devices/virtual/block/dm-4
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-5 -> ../devices/virtual/block/dm-5
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-6 -> ../devices/virtual/block/dm-6
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-7 -> ../devices/virtual/block/dm-7
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-8 -> ../devices/virtual/block/dm-8
lrwxrwxrwx 1 root root 0 may  3 09:42 dm-9 -> ../devices/virtual/block/dm-9
lrwxrwxrwx 1 root root 0 may  3 09:42 loop0 -> ../devices/virtual/block/loop0
lrwxrwxrwx 1 root root 0 may  3 09:42 loop1 -> ../devices/virtual/block/loop1
lrwxrwxrwx 1 root root 0 may  3 09:42 loop2 -> ../devices/virtual/block/loop2
lrwxrwxrwx 1 root root 0 may  3 09:42 loop3 -> ../devices/virtual/block/loop3
lrwxrwxrwx 1 root root 0 may  3 09:42 loop4 -> ../devices/virtual/block/loop4
lrwxrwxrwx 1 root root 0 may  3 09:42 loop5 -> ../devices/virtual/block/loop5
lrwxrwxrwx 1 root root 0 may  3 09:42 loop6 -> ../devices/virtual/block/loop6
lrwxrwxrwx 1 root root 0 may  3 09:42 loop7 -> ../devices/virtual/block/loop7
lrwxrwxrwx 1 root root 0 may  3 09:42 sda -> ../devices/pci0000:00/0000:00:1f.2/host2/target2:0:0/2:0:0:0/block/sda
lrwxrwxrwx 1 root root 0 may  3 09:42 sr0 -> ../devices/pci0000:00/0000:00:1f.1/host0/target0:0:0/0:0:0:0/block/sr0
# lshw | grep -A12 cdrom
           *-cdrom        
                description: DVD writer
                product: DVD+-RW GSA-H53L
                vendor: HL-DT-ST
                physical id: 0.0.0
                bus info: scsi@0:0.0.0
                logical name: /dev/cdrom
                logical name: /dev/cdrom1
                logical name: /dev/cdrw
                logical name: /dev/cdrw1
                logical name: /dev/dvd
                logical name: /dev/dvd1
                logical name: /dev/dvdrw
                logical name: /dev/dvdrw1
                logical name: /dev/scd0
                logical name: /dev/sr0
                version: W712
                serial: [HL-DT-STDVD+-RW GSA-H53LW71207/12/03 7U02
                capabilities: removable audio cd-r cd-rw dvd dvd-r
                configuration: ansiversion=5 status=nodisc
# dmesg
#

While I exec mount commands, I don't see any light in the dvd-writer.

When I insert the cdrom the light flashes for a minute more or less.

If I reboot my computer, I can play with this cdlive.

Can I increase dmesg level to give you more info ? How can I help with this issue ?

Thank you very much

-- Package-specific info:
** Version:
Linux version 2.6.32-4-686 (Debian 2.6.32-11) (maks@debian.org) (gcc version 4.3.4 (Debian 4.3.4-8) ) #1 SMP Tue Apr 6 07:02:27 UTC 2010

** Command line:
BOOT_IMAGE=/vmlinuz-2.6.32-4-686 root=/dev/mapper/delorian-root ro quiet

** Tainted: P (1)
 * Proprietary module has been loaded.

** Kernel log:

** Model information
not available

** Loaded modules:
Module                  Size  Used by
isofs                  24608  0 
ppdev                   4058  0 
lp                      5570  0 
vboxnetadp              5154  0 
acpi_cpufreq            4943  0 
cpufreq_stats           1940  0 
cpufreq_powersave        602  0 
cpufreq_conservative     4018  0 
cpufreq_userspace       1480  0 
fuse                   43758  1 
bridge                 32987  0 
8021q                  14086  0 
garp                    4134  1 8021q
stp                      996  2 bridge,garp
ext4                  254909  1 
jbd2                   56091  1 ext4
crc16                   1027  1 ext4
vboxnetflt             10202  0 
vboxdrv               114917  2 vboxnetadp,vboxnetflt
smsc47b397              2279  0 
loop                    9757  0 
dm_crypt                9127  0 
snd_hda_codec_realtek   163166  1 
snd_usb_audio          50658  2 
snd_usb_lib            11033  1 snd_usb_audio
snd_seq_midi            3576  0 
snd_hda_intel          16595  0 
snd_seq_midi_event      3684  1 snd_seq_midi
snd_hda_codec          46002  2 snd_hda_codec_realtek,snd_hda_intel
snd_rawmidi            12505  2 snd_usb_lib,snd_seq_midi
snd_hwdep               4054  2 snd_usb_audio,snd_hda_codec
snd_pcm                47210  4 snd_usb_audio,snd_hda_intel,snd_hda_codec
snd_seq                35463  2 snd_seq_midi,snd_seq_midi_event
nvidia               8783671  28 
snd_timer              12258  3 snd_pcm,snd_seq
snd_seq_device          3673  3 snd_seq_midi,snd_rawmidi,snd_seq
usbhid                 27980  0 
hid                    50629  1 usbhid
rng_core                2178  0 
i2c_core               12648  1 nvidia
snd                    34363  12 snd_hda_codec_realtek,snd_usb_audio,snd_hda_intel,snd_hda_codec,snd_rawmidi,snd_hwdep,snd_pcm,snd_seq,snd_timer,snd_seq_device
pcspkr                  1207  0 
psmouse                44421  0 
parport_pc             15799  1 
soundcore               3450  1 snd
snd_page_alloc          5045  2 snd_hda_intel,snd_pcm
parport                22554  3 ppdev,lp,parport_pc
evdev                   5609  13 
button                  3598  0 
wmi                     3575  0 
serio_raw               2916  0 
processor              26599  1 acpi_cpufreq
ext3                   94200  6 
jbd                    32169  1 ext3
mbcache                 3762  2 ext4,ext3
dm_mod                 46078  73 dm_crypt
sg                     15964  0 
sr_mod                 10770  0 
cdrom                  26487  1 sr_mod
sd_mod                 25785  3 
crc_t10dif              1012  1 sd_mod
ata_generic             2015  0 
tg3                    88261  0 
uhci_hcd               16057  0 
ehci_hcd               27622  0 
ata_piix               17133  2 
floppy                 40923  0 
libphy                 11638  1 tg3
thermal                 9206  0 
thermal_sys             9378  2 processor,thermal
libata                114416  2 ata_generic,ata_piix
scsi_mod              101305  4 sg,sr_mod,sd_mod,libata
usbcore                98302  6 snd_usb_audio,snd_usb_lib,usbhid,uhci_hcd,ehci_hcd
nls_base                4541  2 isofs,usbcore

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: e2000000-e51fffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000e01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1b.0 Audio device [0403]: Intel Corporation N10/ICH 7 Family High Definition Audio Controller [8086:27d8] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at e0500000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: HDA Intel

00:1c.0 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: 60000000-601fffff
	Prefetchable memory behind bridge: 0000000060200000-00000000603fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation N10/ICH 7 Family PCI Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=3f, subordinate=3f, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: e0200000-e04fffff
	Prefetchable memory behind bridge: 0000000060400000-00000000605fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation N10/ICH7 Family USB UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 4: I/O ports at 2000 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 18
	Region 4: I/O ports at 2020 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 21
	Region 4: I/O ports at 2040 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 22
	Region 4: I/O ports at 2060 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB Controller [0c03]: Intel Corporation N10/ICH 7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 20
	Region 0: Memory at e0504000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4 [size=1]
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374 [size=1]
	Region 4: I/O ports at 20a0 [size=16]
	Kernel driver in use: ata_piix

00:1f.2 IDE interface [0101]: Intel Corporation N10/ICH7 Family SATA IDE Controller [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 20d0 [size=8]
	Region 1: I/O ports at 20e8 [size=4]
	Region 2: I/O ports at 20d8 [size=8]
	Region 3: I/O ports at 20ec [size=4]
	Region 4: I/O ports at 20b0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

01:00.0 VGA compatible controller [0300]: nVidia Corporation G96 [GeForce 9400 GT] [10de:0641] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82be]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at e4000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at e2000000 (64-bit, non-prefetchable) [size=32M]
	Region 5: I/O ports at 1000 [size=128]
	[virtual] Expansion ROM at e0000000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nvidia

3f:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5752 Gigabit Ethernet PCI Express [14e4:1600] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:3011]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at e0400000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: tg3


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 047f:c001 Plantronics, Inc. 
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: squeeze/sid
  APT prefers unstable
  APT policy: (990, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 2.6.32-4-686 (SMP w/2 CPU cores)
Locale: LANG=es_ES.UTF-8, LC_CTYPE=es_ES.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash

Versions of packages linux-image-2.6.32-4-686 depends on:
ii  debconf [debconf-2.0]        1.5.32      Debian configuration management sy
ii  initramfs-tools [linux-initr 0.94.4      tools for generating an initramfs
ii  linux-base                   2.6.32-11   Linux image base package
ii  module-init-tools            3.12~pre2-3 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-4-686 recommends:
ii  firmware-linux-free           2.6.32-11  Binary firmware for various driver
ii  libc6-i686                    2.10.2-6   GNU C Library: Shared libraries [i

Versions of packages linux-image-2.6.32-4-686 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-4-686 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:
  linux-image-2.6.32-4-686/prerm/would-invalidate-boot-loader-2.6.32-4-686: true
  shared/kernel-image/really-run-bootloader: true
  linux-image-2.6.32-4-686/postinst/bootloader-test-error-2.6.32-4-686:
  linux-image-2.6.32-4-686/postinst/depmod-error-initrd-2.6.32-4-686: false
  linux-image-2.6.32-4-686/postinst/bootloader-error-2.6.32-4-686:
  linux-image-2.6.32-4-686/postinst/missing-firmware-2.6.32-4-686:
  linux-image-2.6.32-4-686/prerm/removing-running-kernel-2.6.32-4-686: true

--- End Message ---
--- Begin Message --- 
Version: 3.4.1-1~experimental.1+rm

Debian 6.0 Long Term Support has now ended, and the 'linux-2.6' source
package will no longer be updated.  This bug is being closed on the
assumption that it does not affect the kernel versions in newer Debian
releases.

If you can still reproduce this bug in a newer release, please reopen
the bug report and reassign it to 'src:linux' and the affected version
of the package.  You can find the package version for the running
kernel by running:

    uname -v

or the versions of all installed kernel packages by running:

    dpkg -l 'linux-image-[34]*' | grep ^.i

and looking at the third column.

I apologise that we weren't able to provide a specific resolution for
this bug.

Ben.

-- 
Ben Hutchings - Debian developer, member of Linux kernel and LTS teams

--- End Message ---
Reply to: