--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.32-5-686: breaks DRM/KMS with nouveau X.org driver
- From: Vagrant Cascadian <vagrant@debian.org>
- Date: Tue, 11 Oct 2011 12:07:02 -0700
- Message-id: <20111011190702.GG12453@talon.fglan>
Package: linux-2.6
Version: 2.6.32-38
Severity: important
The stable release update unfortunately broke X.org with the nouveau driver with:
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV6 [Vanta/Vanta LT] [10de:002c] (rev 15) (prog-if 00 [VGA controller])
X.org responds excruciatingly slowly to the point of being un-useable.
Downgrading to 2.6.32-35squeeze2 from security.debian.org fixes the problem.
live well,
vagrant
-- Package-specific info:
** Version:
Linux version 2.6.32-5-686 (Debian 2.6.32-35squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:51:05 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-686 root=UUID=ec01d157-3803-48e9-9190-db68b61fc7f3 ro quiet
** Not tainted
** Kernel log:
[ 2.199199] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.216153] usb 1-1: new low speed USB device using uhci_hcd and address 2
[ 2.243541] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.245151] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.402847] usb 1-1: New USB device found, idVendor=047d, idProduct=102d
[ 2.402856] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.402863] usb 1-1: Product: Kensington USB/PS2 Wheel Mouse
[ 2.402868] usb 1-1: Manufacturer: Kensington
[ 2.403114] usb 1-1: configuration #1 chosen from 1 choice
[ 2.435452] usbcore: registered new interface driver hiddev
[ 2.449871] input: Kensington Kensington USB/PS2 Wheel Mouse as /devices/pci0000:00/0000:00:1f.2/usb1/1-1/1-1:1.0/input/input1
[ 2.450389] generic-usb 0003:047D:102D.0001: input,hidraw0: USB HID v1.10 Mouse [Kensington Kensington USB/PS2 Wheel Mouse] on usb-0000:00:1f.2-1/input0
[ 2.450473] usbcore: registered new interface driver usbhid
[ 2.451075] usbhid: v2.6:USB HID core driver
[ 2.687249] PM: Starting manual resume from disk
[ 2.687260] PM: Resume from partition 8:5
[ 2.687263] PM: Checking hibernation image.
[ 2.709812] PM: Error -22 checking image file
[ 2.709818] PM: Resume from disk failed.
[ 2.727716] PM: Marking nosave pages: 000000000009f000 - 0000000000100000
[ 2.727729] PM: Basic memory bitmaps created
[ 2.735480] PM: Basic memory bitmaps freed
[ 2.889220] kjournald starting. Commit interval 5 seconds
[ 2.889251] EXT3-fs: mounted filesystem with ordered data mode.
[ 5.910304] udev[267]: starting version 164
[ 6.813797] processor LNXCPU:00: registered as cooling_device0
[ 6.817413] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 6.817445] ACPI: Power Button [PBTN]
[ 6.818838] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.818862] ACPI: Power Button [PWRF]
[ 6.902668] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 7.131769] parport_pc 00:07: reported by Plug and Play ACPI
[ 7.131807] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 7.304675] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 7.396517] intel_rng: Firmware space is locked read-only. If you can't or
[ 7.396522] intel_rng: don't want to disable this in firmware setup, and if
[ 7.396525] intel_rng: you are certain that your system has a functional
[ 7.396528] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 7.414295] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.842252] [drm] Initialized drm 1.1.0 20060810
[ 9.353634] nouveau 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 9.369677] [drm] nouveau 0000:01:00.0: Detected an NV 0 generation card (0x20154000)
[ 9.369849] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[ 9.487922] [drm] nouveau 0000:01:00.0: ... appears to be valid
[ 9.488282] [drm] nouveau 0000:01:00.0: BMP BIOS found
[ 9.488287] [drm] nouveau 0000:01:00.0: BMP version 5.17
[ 9.488294] [drm] nouveau 0000:01:00.0: Bios version 03.05.00.10
[ 9.488298] [drm] nouveau 0000:01:00.0: Assuming a CRT output exists
[ 9.488304] [drm] nouveau 0000:01:00.0: Probing TV encoders on I2C bus: 1
[ 9.497074] [drm] nouveau 0000:01:00.0: No TV encoders found.
[ 9.497331] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0x0198
[ 9.497377] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0x02A1
[ 9.510212] [TTM] Zone kernel: Available graphics memory: 257310 kiB.
[ 9.510239] [drm] nouveau 0000:01:00.0: 16 MiB VRAM
[ 9.510377] agpgart-intel 0000:00:00.0: AGP 2.0 bridge
[ 9.510404] agpgart-intel 0000:00:00.0: putting AGP V2 device into 4x mode
[ 9.510434] nouveau 0000:01:00.0: putting AGP V2 device into 4x mode
[ 9.510447] [drm] nouveau 0000:01:00.0: 64 MiB GART (aperture)
[ 9.510767] [drm] nouveau 0000:01:00.0: Allocating FIFO number 0
[ 9.511298] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 9.511386] [drm] nouveau 0000:01:00.0: Saving VGA fonts
[ 9.570480] [drm] nouveau 0000:01:00.0: Detected a VGA connector
[ 9.571429] [drm] nouveau 0000:01:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 9.704072] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x45000, bo de1e9000
[ 9.763672] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 9.763708] Intel ICH 0000:00:1f.5: setting latency timer to 64
[ 9.838221] [drm] nouveau 0000:01:00.0: Setting dpms mode 0 on vga encoder (output 0)
[ 9.838231] [drm] nouveau 0000:01:00.0: Output VGA-1 is running on CRTC 0 using output @
[ 9.855586] Console: switching to colour frame buffer device 160x64
[ 9.867209] fb0: nouveaufb frame buffer device
[ 9.867215] registered panic notifier
[ 9.867401] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
[ 10.384027] intel8x0_measure_ac97_clock: measured 55553 usecs (3110 samples)
[ 10.384034] intel8x0: clocking to 41156
[ 12.315120] Adding 859436k swap on /dev/sda5. Priority:-1 extents:1 across:859436k
[ 12.714077] EXT3 FS on sda1, internal journal
[ 12.955831] loop: module loaded
[ 14.489119] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.492181] e100: eth0 NIC Link is Up 100 Mbps Full Duplex
[ 14.492353] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 17.330619] fuse init (API version 7.13)
[ 24.006290] Bluetooth: Core ver 2.15
[ 24.006498] NET: Registered protocol family 31
[ 24.006503] Bluetooth: HCI device and connection manager initialized
[ 24.006510] Bluetooth: HCI socket layer initialized
[ 24.202333] Bluetooth: L2CAP ver 2.14
[ 24.202340] Bluetooth: L2CAP socket layer initialized
[ 24.223968] Bluetooth: RFCOMM TTY layer initialized
[ 24.223981] Bluetooth: RFCOMM socket layer initialized
[ 24.223987] Bluetooth: RFCOMM ver 1.11
[ 24.224935] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.224943] Bluetooth: BNEP filters: protocol multicast
[ 24.327798] Bridge firewalling registered
[ 24.524214] Bluetooth: SCO (Voice Link) ver 0.6
[ 24.524222] Bluetooth: SCO socket layer initialized
[ 25.348023] eth0: no IPv6 routers present
[ 27.206744] lp0: using parport0 (interrupt-driven).
[ 27.275243] ppdev: user-space parallel port driver
[ 29.419976] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
[ 29.420620] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
** Model information
not available
** Loaded modules:
Module Size Used by
speedstep_lib 2468 0
cpufreq_stats 1940 0
cpufreq_conservative 4018 0
cpufreq_powersave 602 0
cpufreq_userspace 1488 0
battery 3782 0
ppdev 4058 0
lp 5570 0
sco 5885 2
bridge 33051 0
stp 996 1 bridge
bnep 7468 2
rfcomm 25215 0
l2cap 21721 4 bnep,rfcomm
crc16 1027 1 l2cap
bluetooth 36335 6 sco,bnep,rfcomm,l2cap
rfkill 10280 3 bluetooth
fuse 44304 1
loop 9773 0
snd_intel8x0 19595 0
snd_ac97_codec 79148 1 snd_intel8x0
ac97_bus 710 1 snd_ac97_codec
snd_pcm_oss 28671 0
nouveau 314972 2
snd_mixer_oss 10461 1 snd_pcm_oss
snd_pcm 47226 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
ttm 33550 1 nouveau
snd_seq_midi 3576 0
snd_rawmidi 12513 1 snd_seq_midi
drm_kms_helper 18577 1 nouveau
snd_seq_midi_event 3684 1 snd_seq_midi
drm 112096 4 nouveau,ttm,drm_kms_helper
snd_seq 35495 2 snd_seq_midi,snd_seq_midi_event
snd_timer 12258 2 snd_pcm,snd_seq
i2c_algo_bit 3497 1 nouveau
snd_seq_device 3673 3 snd_seq_midi,snd_rawmidi,snd_seq
snd 34431 9 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
i2c_core 12795 4 nouveau,drm_kms_helper,drm,i2c_algo_bit
soundcore 3450 1 snd
snd_page_alloc 5061 2 snd_intel8x0,snd_pcm
shpchp 21220 0
rng_core 2178 0
pci_hotplug 18065 1 shpchp
parport_pc 15799 1
psmouse 44817 0
parport 22554 3 ppdev,lp,parport_pc
pcspkr 1207 0
serio_raw 2916 0
evdev 5609 10
button 3598 1 nouveau
processor 26343 0
ext3 94408 1
jbd 32217 1 ext3
mbcache 3762 1 ext3
usbhid 28040 0
hid 50925 1 usbhid
sg 19945 0
sr_mod 10770 0
sd_mod 26021 3
crc_t10dif 1012 1 sd_mod
cdrom 26487 1 sr_mod
ata_generic 2247 0
ata_piix 17744 2
uhci_hcd 16073 0
thermal 9206 0
e100 22341 0
libata 115913 2 ata_generic,ata_piix
ehci_hcd 28749 0
floppy 40923 0
mii 2714 1 e100
thermal_sys 9378 2 processor,thermal
usbcore 98865 4 usbhid,uhci_hcd,ehci_hcd
nls_base 4541 1 usbcore
scsi_mod 104889 4 sg,sr_mod,sd_mod,libata
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82845 845 [Brookdale] Chipset Host Bridge [8086:1a30] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82845 845 [Brookdale] Chipset AGP Bridge [8086:1a31] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: fd000000-fe1fffff
Prefetchable memory behind bridge: f5e00000-f7ffffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 12) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fc200000-fc4fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801BA ISA Bridge (LPC) [8086:2440] (rev 12)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.1 IDE interface [0101]: Intel Corporation 82801BA IDE U100 Controller [8086:244b] (rev 12) (prog-if 80 [Master])
Subsystem: Compaq Computer Corporation Device [0e11:2411]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [size=1]
Region 4: I/O ports at 2480 [size=16]
Kernel driver in use: ata_piix
00:1f.2 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2442] (rev 12) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:2411]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 19
Region 4: I/O ports at 2440 [size=32]
Kernel driver in use: uhci_hcd
00:1f.4 USB Controller [0c03]: Intel Corporation 82801BA/BAM USB Controller #1 [8086:2444] (rev 12) (prog-if 00 [UHCI])
Subsystem: Compaq Computer Corporation Device [0e11:2411]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 23
Region 4: I/O ports at 2460 [size=32]
Kernel driver in use: uhci_hcd
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801BA/BAM AC'97 Audio Controller [8086:2445] (rev 12)
Subsystem: Compaq Computer Corporation Evo D500 [0e11:0088]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 2000 [size=256]
Region 1: I/O ports at 2400 [size=64]
Kernel driver in use: Intel ICH
01:00.0 VGA compatible controller [0300]: nVidia Corporation NV6 [Vanta/Vanta LT] [10de:002c] (rev 15) (prog-if 00 [VGA controller])
Subsystem: nVidia Corporation Device [10de:0072]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (1250ns min, 250ns max)
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fd000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at f6000000 (32-bit, prefetchable) [size=32M]
[virtual] Expansion ROM at f5e00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: nouveau
02:08.0 Ethernet controller [0200]: Intel Corporation 82801BA/BAM/CA/CAM Ethernet Controller [8086:2449] (rev 03)
Subsystem: Compaq Computer Corporation EtherExpress PRO/100 VM [0e11:0012]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fc400000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 1000 [size=64]
Capabilities: <access denied>
Kernel driver in use: e100
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 047d:102d Kensington Pilot Optical
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 6.0.3
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 2.6.32-5-686 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-686 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-38 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-686 recommends:
ii firmware-linux-free 2.6.32-38 Binary firmware for various driver
ii libc6-i686 2.11.2-10 Embedded GNU C Library: Shared lib
Versions of packages linux-image-2.6.32-5-686 suggests:
ii grub 0.97-64 GRand Unified Bootloader (dummy pa
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-686 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information excluded
--- End Message ---