Bug#695995: marked as done (mpt2sas: port enable failed after reboot when all attached drives are in standby state)

[owner@bugs.debian.org (Debian Bug Tracking System)]

Your message dated Sun, 07 Feb 2016 22:43:10 +0000
with message-id <E1aSY2w-0006Kq-22@deadeye>
and subject line Closing bugs assigned to linux-2.6 package
has caused the Debian Bug report #695995,
regarding mpt2sas: port enable failed after reboot when all attached drives are in standby state
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
695995: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=695995
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems

--- Begin Message ---

• To: submit@bugs.debian.org
• Subject: mpt2sas: port enable failed after reboot when all attached drives are in standby state
• From: CrashPlan Pro <hostmaster@crashplan.pro>
• Date: Sat, 15 Dec 2012 14:59:21 +0100
• Message-id: <50CC8239.1000701@crashplan.pro>

Package: linux-2.6
Version: 2.6.32-46
File: mpt2sas
Severity: important

-- Package-specific info:
** Version:

Linux version 2.6.32-5-amd64 (Debian 2.6.32-46) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun Sep 23 10:07:46 UTC 2012

** Command line:

BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=61dd0022-387c-4fb8-9532-a4af17aa4af3 ro clocksource=hpet hpet=force raid=noautodetect selinux=0 fastboot noisapnp verbose

** Not tainted

** Kernel log:
[    6.640273] sd 5:0:0:0: [sdf] 4096-byte physical blocks
[    6.640428] sd 5:0:0:0: [sdf] Write Protect is off
[    6.640498] sd 5:0:0:0: [sdf] Mode Sense: 00 3a 00 00

[ 6.640549] sd 5:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    6.640786]  sdf:
[    6.959380] ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

[ 6.967809] ata7.00: ATA-8: Hitachi HDS5C3020BLE630, MZ4OAAB0, max UDMA/133

[    6.967883] ata7.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    6.983299] ata7.00: configured for UDMA/100

[ 6.983554] scsi 6:0:0:0: Direct-Access ATA Hitachi HDS5C302 MZ4O PQ: 0 ANSI: 5 [ 6.983923] sd 6:0:0:0: [sdg] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)

[    6.984014] sd 6:0:0:0: [sdg] 4096-byte physical blocks
[    6.984205] sd 6:0:0:0: [sdg] Write Protect is off
[    6.984274] sd 6:0:0:0: [sdg] Mode Sense: 00 3a 00 00

[ 6.984334] sd 6:0:0:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    6.984677]  sdg:
[    7.302048] ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 310)

[ 7.310495] ata8.00: ATA-8: Hitachi HDS5C3020BLE630, MZ4OAAB0, max UDMA/133

[    7.310566] ata8.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 0/32)
[    7.327219] ata8.00: configured for UDMA/100

[ 7.327449] scsi 7:0:0:0: Direct-Access ATA Hitachi HDS5C302 MZ4O PQ: 0 ANSI: 5 [ 7.327783] sd 7:0:0:0: [sdh] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)

[    7.327879] sd 7:0:0:0: [sdh] 4096-byte physical blocks
[    7.328061] sd 7:0:0:0: [sdh] Write Protect is off
[    7.328132] sd 7:0:0:0: [sdh] Mode Sense: 00 3a 00 00

[ 7.328185] sd 7:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA

[    7.328503]  sdh:

[ 7.435553] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None

[    7.435701] e1000e 0000:03:00.0: eth0: 10/100 speed: disabling TSO
[    7.437330] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   12.580591]  unknown partition table
[   12.581039] sd 4:0:0:0: [sde] Attached SCSI disk
[   12.885658]  unknown partition table
[   12.886229] sd 5:0:0:0: [sdf] Attached SCSI disk
[   13.256487]  unknown partition table
[   13.256890] sd 6:0:0:0: [sdg] Attached SCSI disk
[   13.606597]  unknown partition table
[   13.607035] sd 7:0:0:0: [sdh] Attached SCSI disk
[   13.656764] mpt2sas version 02.100.03.00 loaded
[   13.657039] scsi8 : Fusion MPT SAS Host

[ 13.657590] mpt2sas 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16

[   13.657677] mpt2sas 0000:01:00.0: setting latency timer to 64

[ 13.657687] mpt2sas0: 64 BIT PCI BUS DMA ADDRESSING SUPPORTED, total mem (8191048 kB)

[   13.657894]   alloc irq_desc for 30 on node -1
[   13.657899]   alloc kstat_irqs on node -1
[   13.657912] mpt2sas 0000:01:00.0: irq 30 for MSI/MSI-X
[   13.657939] mpt2sas0: PCI-MSI-X enabled: IRQ 30

[ 13.658011] mpt2sas0: iomem(0xfad3c000), mapped(0xffffc90000c78000), size(16384)

[   13.658099] mpt2sas0: ioport(0xc000), size(256)
[   13.658167] mpt2sas0: sending diag reset !!
[   14.777228] mpt2sas0: diag reset: SUCCESS
[   15.212688] mpt2sas0: Allocated physical memory: size(882 kB)

[ 15.212761] mpt2sas0: Current Controller Queue Depth(361), Max Controller Queue Depth(1720)

[   15.212853] mpt2sas0: Scatter Gather Elements per IO(128)

[ 15.445365] mpt2sas0: LSISAS2008: FWVersion(14.00.01.00), ChipRevision(0x03), BiosVersion(07.27.00.00) [ 15.445462] mpt2sas0: Protocol=(Initiator), Capabilities=(Raid,TLR,EEDP,Snapshot Buffer,Diag Trace Buffer,Task Set Full,NCQ)

[   15.446128] mpt2sas0: sending port enable !!

[ 16.954511] mpt2sas0: host_add: handle(0x0001), sas_addr(0x5003048007abbc00), phys(8)

[   18.139446] eth0: no IPv6 routers present

[ 178.828451] mpt2sas0: expander_add: handle(0x0009), parent(0x0001), sas_addr(0x50014380182cf0e6), phys(37)

[  240.375106] INFO: task modprobe:1393 blocked for more than 120 seconds.

[ 240.375179] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 240.375270] modprobe D 0000000000000000 0 1393 1266 0x00000000 [ 240.375426] ffff88023f06b880 0000000000000082 0000000000000000 000000000000cc15 [ 240.375674] 0000000000000096 ffffffff8104e54b 000000000000f9e0 ffff88023f0ebfd8 [ 240.375930] 0000000000015780 0000000000015780 ffff88023c4d3880 ffff88023c4d3b78

[  240.376179] Call Trace:
[  240.376249]  [<ffffffff8104e54b>] ? release_console_sem+0x17e/0x1af
[  240.376324]  [<ffffffff8105aeba>] ? __mod_timer+0x141/0x153
[  240.376396]  [<ffffffff812fbec4>] ? schedule_timeout+0xa5/0xdd
[  240.376465]  [<ffffffff8105aa34>] ? process_timeout+0x0/0x5
[  240.376536]  [<ffffffff812fbd04>] ? wait_for_common+0xde/0x15b
[  240.376606]  [<ffffffff8104a461>] ? default_wake_function+0x0/0x9

[ 240.376686] [<ffffffffa02126e1>] ? _base_make_ioc_operational+0x929/0xa6f [mpt2sas] [ 240.376785] [<ffffffffa0214a85>] ? mpt2sas_base_attach+0xb73/0xc61 [mpt2sas]

[  240.376855]  [<ffffffff810412ee>] ? enqueue_task_fair+0x3e/0x82
[  240.376928]  [<ffffffff8103a311>] ? enqueue_task+0x5f/0x68
[  240.376997]  [<ffffffff8103a403>] ? activate_task+0x22/0x28
[  240.377081]  [<ffffffffa0217e21>] ? _scsih_probe+0x32c/0x501 [mpt2sas]
[  240.377157]  [<ffffffff811a2d46>] ? local_pci_probe+0x12/0x16
[  240.377226]  [<ffffffff811a3996>] ? pci_device_probe+0xc0/0xe9
[  240.377299]  [<ffffffff81221520>] ? driver_probe_device+0xa3/0x14b
[  240.377372]  [<ffffffff81221617>] ? __driver_attach+0x4f/0x6f
[  240.377445]  [<ffffffff812215c8>] ? __driver_attach+0x0/0x6f
[  240.377517]  [<ffffffff81220def>] ? bus_for_each_dev+0x43/0x74
[  240.377588]  [<ffffffff812207af>] ? bus_add_driver+0xaf/0x1f8
[  240.377660]  [<ffffffff812218cf>] ? driver_register+0xa7/0x111
[  240.377735]  [<ffffffffa0128000>] ? _scsih_init+0x0/0x112 [mpt2sas]
[  240.377809]  [<ffffffff811a3bdc>] ? __pci_register_driver+0x50/0xb8
[  240.377888]  [<ffffffffa0128000>] ? _scsih_init+0x0/0x112 [mpt2sas]
[  240.377966]  [<ffffffffa01280fc>] ? _scsih_init+0xfc/0x112 [mpt2sas]
[  240.378041]  [<ffffffff8100a065>] ? do_one_initcall+0x64/0x174
[  240.378114]  [<ffffffff8107ab54>] ? sys_init_module+0xc5/0x21a
[  240.378186]  [<ffffffff81010b42>] ? system_call_fastpath+0x16/0x1b
[  314.931549] mpt2sas0: _base_send_port_enable: timeout
[  314.931620] mpt2sas0: port enable: FAILED
[  314.931686] mpt2sas0: sending diag reset !!
[  316.057859] mpt2sas0: diag reset: SUCCESS
[  316.057969] mpt2sas 0000:01:00.0: PCI INT A disabled

[ 316.058059] mpt2sas0: failure at /build/buildd-linux-2.6_2.6.32-46-amd64-_ApuPc/linux-2.6-2.6.32/debian/build/source_amd64_none/drivers/scsi/mpt2sas/mpt2sas_scsih.c:6021/_scsih_probe()!

** Model information
sys_vendor: Supermicro
product_name: X8SIE
product_version: 0123456789
chassis_vendor: Supermicro
chassis_version: 0123456789
bios_vendor: American Megatrends Inc.
bios_version: 1.2a
board_vendor: Supermicro
board_name: X8SIE
board_version: 0123456789

** Loaded modules:
Module                  Size  Used by
mpt2sas                87869  0
scsi_transport_sas     19865  1 mpt2sas
sata_sil                7412  0
acpi_cpufreq            5571  1
cpufreq_stats           2740  0
cpufreq_conservative     5162  0
cpufreq_powersave        902  0
cpufreq_userspace       1992  0
uinput                  6376  1
w83627ehf              18691  0
hwmon_vid               1828  1 w83627ehf
ipmi_si                30960  0
ipmi_msghandler        26634  1 ipmi_si
loop                   11799  0
i2c_i801                7830  0
i2c_core               15819  1 i2c_i801
evdev                   7352  4
psmouse                49985  0
joydev                  8459  0
snd_pcm                60487  0
snd_timer              15598  1 snd_pcm
snd                    46526  2 snd_pcm,snd_timer
soundcore               4598  1 snd
snd_page_alloc          6249  1 snd_pcm
pcspkr                  1699  0
serio_raw               3752  0
button                  4650  0
processor              29935  5 acpi_cpufreq
ext3                  106710  1
jbd                    37317  1 ext3
mbcache                 5050  1 ext3
sd_mod                 29937  2
crc_t10dif              1276  1 sd_mod
usbhid                 33292  0
hid                    63257  1 usbhid
ata_generic             3239  0
ata_piix               21124  1
libata                133776  3 sata_sil,ata_generic,ata_piix
scsi_mod              126725  4 mpt2sas,scsi_transport_sas,sd_mod,libata
ehci_hcd               32097  0
e1000e                124836  0
usbcore               123271  3 usbhid,ehci_hcd
nls_base                6377  1 usbcore
thermal                11674  0
thermal_sys            11942  2 processor,thermal

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host
       valid_lft forever preferred_lft forever

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000

    link/ether 00:25:90:69:e4:bc brd ff:ff:ff:ff:ff:ff
    inet 192.168.254.27/24 brd 192.168.254.255 scope global eth0
    inet6 fe80::225:90ff:fe69:e4bc/64 scope link
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit

face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 eth0: 116405 721 0 0 0 0 0 171 114061 342 0 0 0 0 0 0

*** Protocol statistics:
Ip:
    662 total packets received
    2 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    519 incoming packets delivered
    321 requests sent out
Icmp:
    0 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
    0 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
Tcp:
    3 active connections openings
    2 passive connection openings
    0 failed connection attempts
    0 connection resets received
    2 connections established
    511 segments received
    313 segments send out
    0 segments retransmited
    0 bad segments received.
    1 resets sent
Udp:
    8 packets received
    0 packets to unknown port received.
    0 packet receive errors
    8 packets sent
UdpLite:
TcpExt:
    1 TCP sockets finished time wait in fast timer
    4 delayed acks sent
    4 packets directly queued to recvmsg prequeue.
    2 bytes directly received in process context from prequeue
    12 packet headers predicted
    262 acknowledgments not containing data payload received
    3 predicted acknowledgments
IpExt:
    InOctets: 99693
    OutOctets: 107725


** PCI devices:

00:00.0 Host bridge [0600]: Intel Corporation Core Processor DRAM Controller [8086:0048] (rev 12)

	Subsystem: Super Micro Computer Inc Device [15d9:040d]

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-

	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=0c <?>

00:06.0 PCI bridge [0604]: Intel Corporation Core Processor Secondary PCI Express Root Port [8086:004b] (rev 12) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fad00000-fadfffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000]
	Capabilities: [80] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4169
	Capabilities: [a0] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-

LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <256ns, L1 <4us

			ClockPM- Surprise- LLActRep- BwNot+
		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt+ ABWMgmt-

		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
			Slot #4, PowerLimit 25.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet+ LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Not Supported, TimeoutDis- ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [100 v1] Virtual Channel
		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
		Arb:	Fixed- WRR32- WRR64- WRR128-
		Ctrl:	ArbSelect=Fixed
		Status:	InProgress-
		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
			Arb:	Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
			Status:	NegoPending- InProgress-
	Kernel driver in use: pcieport

00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])

	Subsystem: Super Micro Computer Inc Device [15d9:040d]

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 0
	Interrupt: pin A routed to IRQ 21
	Region 0: Memory at facfc000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ehci_hcd

00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: c0000000-c01fffff
	Prefetchable memory behind bridge: 00000000c0200000-00000000c03fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us

			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
			Slot #2, PowerLimit 25.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
			Changed: MRL- PresDet- LinkState-
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-

LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4171
	Capabilities: [90] Subsystem: Super Micro Computer Inc Device [15d9:040d]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 0, Cache Line Size: 32 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fae00000-faefffff
	Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff

Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-

	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [40] Express (v2) Root Port (Slot+), MSI 00
		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag- RBE+ FLReset-
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
			MaxPayload 128 bytes, MaxReadReq 128 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-

LnkCap: Port #5, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us

			ClockPM- Surprise- LLActRep+ BwNot-
		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-

		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
			Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
			Changed: MRL- PresDet+ LinkState+
		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
		RootCap: CRSVisible-
		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
		DevCap2: Completion Timeout: Range BC, TimeoutDis+ ARIFwd-
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis- ARIFwd-

LnkCtl2: Target Link Speed: 2.5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
		Address: fee0f00c  Data: 4179
	Capabilities: [90] Subsystem: Super Micro Computer Inc Device [15d9:040d]
	Capabilities: [a0] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Kernel driver in use: pcieport

00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])

	Subsystem: Super Micro Computer Inc Device [15d9:040d]

Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at facfa000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2

Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)

		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] Debug port: BAR=1 offset=00a0
	Capabilities: [98] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ehci_hcd

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 0
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: faf00000-fbffffff
	Prefetchable memory behind bridge: 00000000f9000000-00000000f9ffffff

Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-

	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: [50] Subsystem: Super Micro Computer Inc Device [15d9:040d]

00:1f.0 ISA bridge [0601]: Intel Corporation 3400 Series Chipset LPC Interface Controller [8086:3b14] (rev 05)

	Subsystem: Super Micro Computer Inc Device [15d9:040d]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 0
	Capabilities: [e0] Vendor Specific Information: Len=10 <?>

00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b20] (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])

	Subsystem: Super Micro Computer Inc Device [15d9:040d]

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at bc00 [size=8]
	Region 1: I/O ports at b880 [size=4]
	Region 2: I/O ports at b800 [size=8]
	Region 3: I/O ports at b480 [size=4]
	Region 4: I/O ports at b400 [size=16]
	Region 5: I/O ports at b080 [size=16]
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [b0] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)

	Subsystem: Super Micro Computer Inc Device [15d9:040d]

Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at facf8000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at 0400 [size=32]
	Kernel driver in use: i801_smbus

00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b26] (rev 05) (prog-if 85 [Master SecO PriO])

	Subsystem: Super Micro Computer Inc Device [15d9:040d]

Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at ac00 [size=8]
	Region 1: I/O ports at a880 [size=4]
	Region 2: I/O ports at a800 [size=8]
	Region 3: I/O ports at a480 [size=4]
	Region 4: I/O ports at a400 [size=16]
	Region 5: I/O ports at a080 [size=16]
	Capabilities: [70] Power Management version 3
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [b0] PCI Advanced Features
		AFCap: TP+ FLR+
		AFCtrl: FLR-
		AFStatus: TP-
	Kernel driver in use: ata_piix

01:00.0 Serial Attached SCSI controller [0107]: LSI Logic / Symbios Logic SAS2008 PCI-Express Fusion-MPT SAS-2 [Falcon] [1000:0072] (rev 03)

	Subsystem: Super Micro Computer Inc Device [15d9:0400]

Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at c000 [size=256]
	Region 1: Memory at fad3c000 (64-bit, non-prefetchable) [size=16K]
	Region 3: Memory at fad40000 (64-bit, non-prefetchable) [size=256K]
	Expansion ROM at fad80000 [disabled] [size=512K]
	Capabilities: [50] Power Management version 3
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [68] Express (v2) Endpoint, MSI 00
		DevCap:	MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend-

LnkCap: Port #0, Speed 5GT/s, Width x8, ASPM L0s, Latency L0 <64ns, L1 <1us

			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 5GT/s, Width x8, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

		DevCap2: Completion Timeout: Range BC, TimeoutDis+
		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-

LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-

			 Compliance De-emphasis: -6dB
		LnkSta2: Current De-emphasis Level: -6dB
	Capabilities: [d0] Vital Product Data
		Unknown small resource type 00, will not decode more.
	Capabilities: [a8] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [c0] MSI-X: Enable- Count=15 Masked-
		Vector table: BAR=1 offset=00002000
		PBA: BAR=1 offset=00003800
	Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

		CESta:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn-
	Capabilities: [138 v1] Power Budgeting <?>
	Capabilities: [150 v1] Single Root I/O Virtualization (SR-IOV)
		IOVCap:	Migration-, Interrupt Message Number: 000
		IOVCtl:	Enable- Migration- Interrupt- MSE- ARIHierarchy-
		IOVSta:	Migration-

Initial VFs: 16, Total VFs: 16, Number of VFs: 16, Function Dependency Link: 00

		VF offset: 1, stride: 1, Device ID: 0072
		Supported Page Size: 00000553, System Page Size: 00000001
		Region 0: Memory at 0000000000000000 (64-bit, non-prefetchable)
		Region 2: Memory at 0000000000000000 (64-bit, non-prefetchable)
		VF Migration: offset: 00000000, BIR: 0
	Capabilities: [190 v1] Alternative Routing-ID Interpretation (ARI)
		ARICap:	MFVC- ACS-, Next Function: 0
		ARICtl:	MFVC- ACS-, Function Group: 0

03:00.0 Ethernet controller [0200]: Intel Corporation 82574L Gigabit Network Connection [8086:10d3]

	Subsystem: Super Micro Computer Inc Device [15d9:040d]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at faee0000 (32-bit, non-prefetchable) [size=128K]
	Region 2: I/O ports at dc00 [size=32]
	Region 3: Memory at faedc000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: [c8] Power Management version 2
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
		Address: 0000000000000000  Data: 0000
	Capabilities: [e0] Express (v1) Endpoint, MSI 00
		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s <512ns, L1 <64us
			ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
		DevCtl:	Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
			MaxPayload 128 bytes, MaxReadReq 512 bytes
		DevSta:	CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-

LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <64us

			ClockPM- Surprise- LLActRep- BwNot-
		LnkCtl:	ASPM L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk+
			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-

LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

	Capabilities: [a0] MSI-X: Enable+ Count=5 Masked-
		Vector table: BAR=3 offset=00000000
		PBA: BAR=3 offset=00002000
	Capabilities: [100 v1] Advanced Error Reporting

UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-

		CESta:	RxErr+ BadTLP+ BadDLLP+ Rollover- Timeout+ NonFatalErr+
		CEMsk:	RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
		AERCap:	First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
	Capabilities: [140 v1] Device Serial Number 00-25-90-ff-ff-69-e4-bc
	Kernel driver in use: e1000e

04:00.0 RAID bus controller [0104]: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller [1095:3114] (rev 02)

	Subsystem: Silicon Image, Inc. Device [1095:7114]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 128, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 20
	Region 0: I/O ports at e480 [size=8]
	Region 1: I/O ports at e400 [size=4]
	Region 2: I/O ports at ec00 [size=8]
	Region 3: I/O ports at e880 [size=4]
	Region 4: I/O ports at e800 [size=16]
	Region 5: Memory at fbf7fc00 (32-bit, non-prefetchable) [size=1K]
	Expansion ROM at fbf80000 [disabled] [size=512K]
	Capabilities: [60] Power Management version 2
		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
	Kernel driver in use: sata_sil

04:03.0 VGA compatible controller [0300]: Matrox Graphics, Inc. MGA G200eW WPCM450 [102b:0532] (rev 0a) (prog-if 00 [VGA controller])

	Subsystem: Super Micro Computer Inc Device [15d9:040d]

Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

	Latency: 128 (4000ns min, 8000ns max), Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 15
	Region 0: Memory at f9000000 (32-bit, prefetchable) [size=16M]
	Region 1: Memory at faffc000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at fb000000 (32-bit, non-prefetchable) [size=8M]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: [dc] Power Management version 1
		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-


** USB devices:
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0557:2221 ATEN International Co., Ltd
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 6.0.6
  APT prefers stable

APT policy: (990, 'stable'), (800, 'testing'), (500, 'stable-updates'), (300, 'unstable')

Architecture: amd64 (x86_64)

Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-2.6.32-5-amd64 depends on:

ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy ii initramfs-tools [linux-init 0.99~bpo60+1 tools for generating an initramfs

ii  linux-base                  3.4~bpo60+1  Linux image base package

ii module-init-tools 3.12-2 tools for managing Linux kernel mo

Versions of packages linux-image-2.6.32-5-amd64 recommends:

ii firmware-linux-free 3.1 Binary firmware for various driver

Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn  grub | lilo                   <none>     (no description available)
pn  linux-doc-2.6.32              <none>     (no description available)

Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn  firmware-bnx2                 <none>     (no description available)
pn  firmware-bnx2x                <none>     (no description available)
pn  firmware-ipw2x00              <none>     (no description available)
pn  firmware-ivtv                 <none>     (no description available)
pn  firmware-iwlwifi              <none>     (no description available)
pn  firmware-linux                <none>     (no description available)
pn  firmware-linux-nonfree        <none>     (no description available)
pn  firmware-qlogic               <none>     (no description available)
pn  firmware-ralink               <none>     (no description available)
pn  xen-hypervisor                <none>     (no description available)

-- debconf information:

linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:

linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false

linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true

  linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:

--- End Message ---

--- Begin Message ---

• To: 695995-done@bugs.debian.org
• Subject: Closing bugs assigned to linux-2.6 package
• From: Ben Hutchings <benh@debian.org>
• Date: Sun, 07 Feb 2016 22:43:10 +0000
• Message-id: <E1aSY2w-0006Kq-22@deadeye>

Version: 3.4.1-1~experimental.1+rm

Debian 6.0 Long Term Support has now ended, and the 'linux-2.6' source
package will no longer be updated.  This bug is being closed on the
assumption that it does not affect the kernel versions in newer Debian
releases.

If you can still reproduce this bug in a newer release, please reopen
the bug report and reassign it to 'src:linux' and the affected version
of the package.  You can find the package version for the running
kernel by running:

    uname -v

or the versions of all installed kernel packages by running:

    dpkg -l 'linux-image-[34]*' | grep ^.i

and looking at the third column.

I apologise that we weren't able to provide a specific resolution for
this bug.

Ben.

-- 
Ben Hutchings - Debian developer, member of Linux kernel and LTS teams

--- End Message ---