--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.37-2-amd64: Radeon R600 driver fails to control fan (i2c)
- From: Denis Washington <denisw@online.de>
- Date: Wed, 09 Mar 2011 14:29:47 +0100
- Message-id: <20110309132947.3064.38726.reportbug@dwashington-lp>
Package: linux-2.6
Version: 2.6.37-2
Severity: important
Tags: upstream
With the Free Software driver, the GPU fan of my AMD Radeon HD 4650 always
quickly spins up after a short time of moderate desktop usage and never
noticeably spins down again (I need to restart the computer for this to
happen), making the laptop very noisy. This only happens with the Free Software
radeon driver, unfortunately; the fglrx driver seems to control the fan
properly, but for technical and ideological reasons, I would like to use the
free driver instead.
If this helps, the lm_sensors "sensors-detect" tool seems to find some i2c
thermal sensor chips belonging to the Radeon card, but only recommends the
"coretemp" module. (Loading it does not change anything.) I have attached the
output to sensors-detect if it helps.
I have firmware-linux-nonfree installed (for the R600 firmware files).
-- Package-specific info:
** Version:
Linux version 2.6.37-2-amd64 (Debian 2.6.37-2) (ben@decadent.org.uk) (gcc
version 4.4.5 (Debian 4.4.5-12) ) #1 SMP Sun Feb 27 10:12:22 UTC 2011
** Command line:
root=/dev/sda7 ro quiet
** Not tainted
** Kernel log:
[ 6.561993] ATOM BIOS: BR32659.001
[ 6.562022] radeon 0000:01:00.0: VRAM: 1024M 0x0000000000000000 -
0x000000003FFFFFFF (1024M used)
[ 6.562024] radeon 0000:01:00.0: GTT: 512M 0x0000000040000000 -
0x000000005FFFFFFF
[ 6.562963] [drm] Detected VRAM RAM=1024M, BAR=256M
[ 6.562966] [drm] RAM width 128bits DDR
[ 6.563037] [TTM] Zone kernel: Available graphics memory: 2014216 kiB.
[ 6.563039] [TTM] Initializing pool allocator.
[ 6.563057] [drm] radeon: 1024M of VRAM memory ready
[ 6.563059] [drm] radeon: 512M of GTT memory ready.
[ 6.563130] radeon 0000:01:00.0: irq 43 for MSI/MSI-X
[ 6.563137] radeon 0000:01:00.0: radeon: using MSI.
[ 6.563170] [drm] radeon: irq initialized.
[ 6.563172] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 6.563722] [drm] Loading RV730 Microcode
[ 6.605992] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 6.641046] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
22
[ 6.641111] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 6.641137] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 6.803868] hda_codec: ALC272: BIOS auto-probing.
[ 6.804966] input: HDA Digital PCBeep as
/devices/pci0000:00/0000:00:1b.0/input/input7
[ 6.811874] input: HDA Intel Mic as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 6.811931] input: HDA Intel Headphone as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 6.817578] radeon 0000:01:00.0: WB enabled
[ 6.863528] [drm] ring test succeeded in 1 usecs
[ 6.863613] [drm] radeon: ib pool ready.
[ 6.863688] [drm] ib test succeeded in 0 usecs
[ 6.863690] [drm] Enabling audio support
[ 6.864585] [drm] Radeon Display Connectors
[ 6.864587] [drm] Connector 0:
[ 6.864589] [drm] LVDS
[ 6.864591] [drm] DDC: 0x7f68 0x7f68 0x7f6c 0x7f6c 0x7f70 0x7f70 0x7f74
0x7f74
[ 6.864593] [drm] Encoders:
[ 6.864594] [drm] LCD1: INTERNAL_UNIPHY2
[ 6.864596] [drm] Connector 1:
[ 6.864597] [drm] VGA
[ 6.864599] [drm] DDC: 0x7fa0 0x7fa0 0x7fa4 0x7fa4 0x7fa8 0x7fa8 0x7fac
0x7fac
[ 6.864601] [drm] Encoders:
[ 6.864602] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 6.864603] [drm] Connector 2:
[ 6.864604] [drm] HDMI-A
[ 6.864606] [drm] HPD2
[ 6.864607] [drm] DDC: 0x7e50 0x7e50 0x7e54 0x7e54 0x7e58 0x7e58 0x7e5c
0x7e5c
[ 6.864609] [drm] Encoders:
[ 6.864610] [drm] DFP2: INTERNAL_UNIPHY
[ 6.864612] [drm] Connector 3:
[ 6.864613] [drm] DisplayPort
[ 6.864614] [drm] HPD3
[ 6.864616] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c
0x7f1c
[ 6.864617] [drm] Encoders:
[ 6.864618] [drm] DFP1: INTERNAL_UNIPHY
[ 7.016064] [drm] radeon: power management initialized
[ 7.087295] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps:
0xd04711/0xa00000/0x20000
[ 7.087301] synaptics: Toshiba Satellite L500 detected, limiting rate to
40pps.
[ 7.232270] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input10
[ 7.998646] [drm] fb mappable at 0xD0142000
[ 7.998648] [drm] vram apper at 0xD0000000
[ 7.998649] [drm] size 4325376
[ 7.998650] [drm] fb depth is 24
[ 7.998651] [drm] pitch is 5632
[ 8.630653] Console: switching to colour frame buffer device 170x48
[ 8.632978] fb0: radeondrmfb frame buffer device
[ 8.632979] drm: registered panic notifier
[ 8.632991] [drm] Initialized radeon 2.7.0 20080528 for 0000:01:00.0 on
minor 0
[ 8.633044] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ
17
[ 8.633115] HDA Intel 0000:01:00.1: irq 45 for MSI/MSI-X
[ 8.633144] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 9.379872] Adding 4095996k swap on /dev/sda5. Priority:-1 extents:1
across:4095996k
[ 9.382559] EXT4-fs (sda7): re-mounted. Opts: (null)
[ 9.598389] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro
[ 9.751230] loop: module loaded
[ 11.166957] fuse init (API version 7.15)
[ 14.300580] r8169 0000:0e:00.0: eth0: link down
[ 14.300994] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.466278] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 16.573862] Bluetooth: L2CAP ver 2.15
[ 16.573864] Bluetooth: L2CAP socket layer initialized
[ 16.626099] Bluetooth: RFCOMM TTY layer initialized
[ 16.626103] Bluetooth: RFCOMM socket layer initialized
[ 16.626104] Bluetooth: RFCOMM ver 1.11
[ 16.657489] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 16.657491] Bluetooth: BNEP filters: protocol multicast
[ 16.666012] Bluetooth: SCO (Voice Link) ver 0.6
[ 16.666014] Bluetooth: SCO socket layer initialized
[ 17.783048] lp: driver loaded but no devices found
[ 17.794726] ppdev: user-space parallel port driver
[ 24.611371] EXT4-fs (sda7): re-mounted. Opts: errors=remount-ro,commit=0
[ 32.642357] hda-intel: IRQ timing workaround is activated for card #1.
Suggest a bigger bdl_pos_adj.
[ 34.000335] UDF-fs: No VRS found
[ 34.000338] UDF-fs: No partition found (1)
[ 34.006912] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 34.118997] ISO 9660 Extensions: RRIP_1991A
[ 47.859225] wlan0: authenticate with d8:5d:4c:c6:2d:2b (try 1)
[ 47.862532] wlan0: authenticated
[ 47.862557] wlan0: associate with d8:5d:4c:c6:2d:2b (try 1)
[ 47.865391] wlan0: RX AssocResp from d8:5d:4c:c6:2d:2b (capab=0x431 status=0
aid=1)
[ 47.865395] wlan0: associated
[ 47.867195] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 48.941361] Intel AES-NI instructions are not detected.
[ 48.968046] padlock: VIA PadLock not detected.
[ 58.584028] wlan0: no IPv6 routers present
** Model information
sys_vendor: TOSHIBA
product_name: Satellite L500
product_version: PSLJ3E-02601JGR
chassis_vendor: TOSHIBA
chassis_version: N/A
bios_vendor: TOSHIBA
bios_version: V1.50
board_vendor: TOSHIBA
board_name: KSWAA
board_version: 1.00
** Loaded modules:
Module Size Used by
cryptd 6847 0
aes_x86_64 7396 2
aes_generic 26106 1 aes_x86_64
nls_utf8 1256 1
isofs 27430 1
udf 67294 0
crc_itu_t 1331 1 udf
parport_pc 18869 0
ppdev 5139 0
lp 7966 0
parport 25742 3 parport_pc,ppdev,lp
sco 7563 2
bnep 9912 2
rfcomm 28486 8
l2cap 30438 16 bnep,rfcomm
binfmt_misc 6557 1
fuse 54683 1
coretemp 4840 0
loop 13819 0
snd_hda_codec_hdmi 19697 1
joydev 9144 0
snd_hda_codec_realtek 275746 1
snd_hda_intel 19434 2
arc4 1330 2
snd_hda_codec 62413 3
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel
radeon 682777 3
ttm 44440 1 radeon
ecb 1881 2
uvcvideo 51688 0
videodev 53974 1 uvcvideo
drm_kms_helper 22085 1 radeon
snd_hwdep 5484 1 snd_hda_codec
drm 152653 5 radeon,ttm,drm_kms_helper
btusb 9679 2
v4l1_compat 11622 2 uvcvideo,videodev
bluetooth 44469 9 sco,bnep,rfcomm,l2cap,btusb
iwlagn 131666 0
iwlcore 47364 1 iwlagn
mac80211 168033 2 iwlagn,iwlcore
i2c_algo_bit 4105 1 radeon
snd_pcm 61789 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec
snd_seq 42454 0
snd_seq_device 4531 1 snd_seq
snd_timer 16304 2 snd_pcm,snd_seq
i2c_i801 7318 0
v4l2_compat_ioctl32 8899 1 videodev
snd 47132 13
snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_seq,snd_seq_device,snd_timer
cfg80211 114261 3 iwlagn,iwlcore,mac80211
shpchp 21923 0
i2c_core 16549 6
radeon,videodev,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
video 11139 0
battery 5710 0
ac 2280 0
tpm_tis 7157 0
tpm 9923 1 tpm_tis
psmouse 45274 0
soundcore 4614 1 snd
sparse_keymap 2400 0
output 1764 1 video
pci_hotplug 19711 1 shpchp
power_supply 7683 3 radeon,battery,ac
toshiba_bluetooth 1858 0
tpm_bios 4709 1 tpm
processor 23794 2
snd_page_alloc 6289 2 snd_hda_intel,snd_pcm
rfkill 13870 4 bluetooth,cfg80211
serio_raw 3726 0
pcspkr 1739 0
thermal_sys 11764 2 video,processor
button 4722 0
evdev 8115 12
ext4 279584 1
mbcache 5104 1 ext4
jbd2 57867 1 ext4
crc16 1327 2 l2cap,ext4
sg 18967 0
sd_mod 28386 3
sr_mod 12759 1
crc_t10dif 1300 1 sd_mod
cdrom 29865 1 sr_mod
uhci_hcd 18394 0
ahci 19409 3
libahci 15957 1 ahci
libata 143334 2 ahci,libahci
ehci_hcd 32416 0
usbcore 119015 5 uvcvideo,btusb,uhci_hcd,ehci_hcd
scsi_mod 154559 4 sg,sd_mod,sr_mod,libata
r8169 28673 0
mii 3266 1 r8169
nls_base 6369 4 nls_utf8,isofs,udf,usbcore
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory
Controller Hub [8086:2a40] (rev 07)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 4 Series Chipset PCI
Express Graphics Port [8086:2a41] (rev 07) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: f2100000-f21fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1800 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 4: I/O ports at 1840 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 19
Region 0: Memory at f2504800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio
Controller [8086:293e] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=03, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f4000000-f5ffffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f1ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.2 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 3 [8086:2944] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0e, subordinate=0e, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: c0000000-c03fffff
Prefetchable memory behind bridge: 00000000f2000000-00000000f20fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=14, subordinate=14, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: f2200000-f22fffff
Prefetchable memory behind bridge: 00000000c0400000-00000000c05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.5 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express
Port 6 [8086:294a] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: c0600000-c07fffff
Prefetchable memory behind bridge: 00000000c0800000-00000000c09fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at 1860 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1880 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 18a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f2504c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=26, subordinate=26, sec-latency=0
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M LPC Interface Controller
[8086:2919] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation ICH9M/M-E SATA AHCI
Controller [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 41
Region 0: I/O ports at 18f0 [size=8]
Region 1: I/O ports at 18e4 [size=4]
Region 2: I/O ports at 18e8 [size=8]
Region 3: I/O ports at 18e0 [size=4]
Region 4: I/O ports at 18c0 [size=32]
Region 5: Memory at f2504000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller
[8086:2930] (rev 03)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 19
Region 0: Memory at c0a00000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1c00 [size=32]
01:00.0 VGA compatible controller [0300]: ATI Technologies Inc M96 [Mobility
Radeon HD 4650] [1002:9480] (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device [1179:ff80]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at f2100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at f2120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: ATI Technologies Inc RV710/730 [1002:aa38]
Subsystem: Toshiba America Info Systems Device [1179:ff80]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 45
Region 0: Memory at f2110000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
0e:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02)
Subsystem: Toshiba America Info Systems Device [1179:ff00]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at f2010000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f2000000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at f2020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: r8169
14:00.0 Network controller [0280]: Intel Corporation WiFi Link 5100 [8086:4232]
Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1201]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: Memory at f2200000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlagn
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 064e:d104 Suyin Corp.
Bus 008 Device 002: ID 0930:020f Toshiba Corp.
-- System Information:
Debian Release: wheezy/sid
APT prefers unstable
APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.37-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.37-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.38 Debian configuration management sy
ii initramfs-tools [linux-initra 0.98.8 tools for generating an initramfs
ii linux-base 2.6.37-2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.37-2-amd64 recommends:
ii firmware-linux-free 2.6.37-2 Binary firmware for various driver
Versions of packages linux-image-2.6.37-2-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.37 <none> (no description available)
Versions of packages linux-image-2.6.37-2-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
ii firmware-iwlwifi 0.29 Binary firmware for Intel Wireless
pn firmware-linux <none> (no description available)
ii firmware-linux-nonfree 0.29 Binary firmware for various driver
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.37-2-amd64/prerm/removing-running-kernel-2.6.37-2-amd64: true
* linux-image-2.6.37-2-amd64/postinst/missing-firmware-2.6.37-2-amd64:
linux-image-2.6.37-2-amd64/postinst/depmod-error-initrd-2.6.37-2-amd64: false
linux-image-2.6.37-2-amd64/postinst/ignoring-do-bootloader-2.6.37-2-amd64:
# sensors-detect revision 5861 (2010-09-21 17:21:05 +0200)
# System: TOSHIBA Satellite L500 (laptop)
# Board: TOSHIBA KSWAA
This program will help you determine which kernel modules you need
to load to use lm_sensors most effectively. It is generally safe
and recommended to accept the default answers to all questions,
unless you know what you're doing.
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no):
Module cpuid loaded successfully.
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... No
AMD Family 11h thermal sensors... No
Intel digital thermal sensor... Success!
(driver `coretemp')
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
Some Super I/O chips contain embedded sensors. We have to write to
standard I/O ports to probe them. This is usually safe.
Do you want to scan for Super I/O sensors? (YES/no):
Probing for Super-I/O at 0x2e/0x2f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Probing for Super-I/O at 0x4e/0x4f
Trying family `National Semiconductor'... No
Trying family `SMSC'... No
Trying family `VIA/Winbond/Nuvoton/Fintek'... No
Trying family `ITE'... No
Some hardware monitoring chips are accessible through the ISA I/O ports.
We have to write to arbitrary I/O ports to probe them. This is usually
safe though. Yes, you do have ISA I/O ports even if you do not have any
ISA slots! Do you want to scan the ISA I/O ports? (YES/no):
Probing for `National Semiconductor LM78' at 0x290... No
Probing for `National Semiconductor LM79' at 0x290... No
Probing for `Winbond W83781D' at 0x290... No
Probing for `Winbond W83782D' at 0x290... No
Lastly, we can probe the I2C/SMBus adapters for connected hardware
monitoring devices. This is the most risky part, and while it works
reasonably well on most systems, it has been reported to cause trouble
on some systems.
Do you want to probe the I2C/SMBus adapters now? (YES/no):
Using driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9
Module i2c-dev loaded successfully.
Next adapter: Radeon i2c bit bus 0x90 (i2c-0)
Do you want to scan it? (YES/no/selectively):
Next adapter: Radeon i2c bit bus 0x91 (i2c-1)
Do you want to scan it? (YES/no/selectively):
Next adapter: Radeon i2c bit bus 0x92 (i2c-2)
Do you want to scan it? (YES/no/selectively):
Next adapter: Radeon i2c bit bus 0x93 (i2c-3)
Do you want to scan it? (YES/no/selectively):
Next adapter: Radeon i2c bit bus 0x94 (i2c-4)
Do you want to scan it? (YES/no/selectively):
Next adapter: Radeon i2c bit bus 0x95 (i2c-5)
Do you want to scan it? (YES/no/selectively):
Next adapter: Radeon i2c bit bus 0x96 (i2c-6)
Do you want to scan it? (YES/no/selectively):
Client found at address 0x50
Probing for `Analog Devices ADM1033'... No
Probing for `Analog Devices ADM1034'... No
Probing for `SPD EEPROM'... No
Probing for `EDID EEPROM'... Yes
(confidence 8, not a hardware monitoring chip)
Next adapter: Radeon aux bus DP-auxch (i2c-7)
Do you want to scan it? (YES/no/selectively):
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `coretemp':
* Chip `Intel digital thermal sensor' (confidence: 9)
To load everything that is needed, add this to /etc/modules:
#----cut here----
# Chip drivers
coretemp
#----cut here----
If you have some drivers built into your kernel, the list above will
contain too many modules. Skip the appropriate ones!
Do you want to add these lines automatically to /etc/modules? (yes/NO)
Unloading i2c-dev... OK
Unloading cpuid... OK
--- End Message ---