--- Begin Message ---
- To: submit@bugs.debian.org
- Subject: linux-image-2.6.30-2-486: 3c59x: NETDEV WATCHDOG: transmit timed out
- From: Steve Karg <steve@kargs.net>
- Date: Sun, 15 Nov 2009 21:08:32 -0600
- Message-id: <f46abdb70911151908o3241e8c2k5d221c894e4d465a@mail.gmail.com>
- Reply-to: steve@kargs.net
Package: linux-image-2.6.30-bpo.2-486
Version: 2.6.30-8~bpo50+1
Severity: critical
Under heavy network usage (i.e. viewing photos served via sshfs to
another PC), Dell Latitude CP M233ST laptop running as home
fileserver, network stops functioning. I have to reboot to get the
network working again. I read that the IRQ handling was changed, and
it was suggested to try one of the newest kernels. I used the
linux-image-2.6.26-2-486 initially. Then I tried an experimental
build-image kernel (linux-image-2.6.30-1-486) and backports kernel
(linux-image-2.6.30-2-486) and although less frequent, the NETDEV
WATCHDOG still occurs under heavy usage.
The /var/log/messages file shows the following:
Nov 15 19:45:20 samuel kernel: [31020.000091] ------------[ cut here
]------------
Nov 15 19:45:20 samuel kernel: [31020.000194] WARNING: at
/build/buildd/linux-2.6-2.6.30/debian/build/source_i386_none/net/sched/sch_generic.c:226
dev_watchdog+0xc8/0x14a()
Nov 15 19:45:20 samuel kernel: [31020.000239] Hardware name: Latitude
CP M233ST
Nov 15 19:45:20 samuel kernel: [31020.000266] NETDEV WATCHDOG: eth0
(3c59x): transmit timed out
Nov 15 19:45:20 samuel kernel: [31020.000290] Modules linked in:
rfcomm l2cap bluetooth nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs
cpufreq_conservative cpufreq_stats cpufreq_userspace cpufreq_powersave
nls_utf8 cifs nls_base loop joydev 3c59x mii dcdbas pcmcia
snd_wavefront parport_pc video parport output snd_cs4236 snd_wss_lib
snd_opl3_lib snd_hwdep snd_mpu401_uart snd_rawmidi snd_seq_device
button battery ac processor snd_pcm snd_timer snd soundcore
snd_page_alloc psmouse i2c_piix4 yenta_socket evdev serio_raw i2c_core
pcspkr rsrc_nonstatic pcmcia_core sd_mod crc_t10dif ext3 jbd mbcache
usb_storage ide_cd_mod cdrom ide_gd_mod ata_generic libata floppy
scsi_mod uhci_hcd piix ide_pci_generic usbcore ide_core thermal fan
thermal_sys
Nov 15 19:45:20 samuel kernel: [31020.000774] Pid: 0, comm: swapper
Not tainted 2.6.30-bpo.2-486 #1
Nov 15 19:45:20 samuel kernel: [31020.000801] Call Trace:
Nov 15 19:45:20 samuel kernel: [31020.000871] [<c011e7e0>] ?
warn_slowpath_common+0x5e/0x8a
Nov 15 19:45:20 samuel kernel: [31020.000915] [<c0293109>] ?
dev_watchdog+0x0/0x14a
Nov 15 19:45:20 samuel kernel: [31020.000957] [<c011e83e>] ?
warn_slowpath_fmt+0x26/0x2a
Nov 15 19:45:20 samuel kernel: [31020.000997] [<c02931d1>] ?
dev_watchdog+0xc8/0x14a
Nov 15 19:45:20 samuel kernel: [31020.001067] [<c0134f58>] ?
clockevents_program_event+0xbd/0xcb
Nov 15 19:45:20 samuel kernel: [31020.001113] [<c0135b5f>] ?
tick_dev_program_event+0x1e/0x80
Nov 15 19:45:20 samuel kernel: [31020.001172] [<c012503c>] ?
run_timer_softirq+0x12e/0x180
Nov 15 19:45:20 samuel kernel: [31020.001212] [<c0293109>] ?
dev_watchdog+0x0/0x14a
Nov 15 19:45:20 samuel kernel: [31020.001252] [<c0122167>] ?
__do_softirq+0x82/0x125
Nov 15 19:45:20 samuel kernel: [31020.001288] [<c0122237>] ?
do_softirq+0x2d/0x37
Nov 15 19:45:20 samuel kernel: [31020.001324] [<c01222fa>] ? irq_exit+0x25/0x4e
Nov 15 19:45:20 samuel kernel: [31020.001383] [<c0104614>] ? do_IRQ+0x53/0x63
Nov 15 19:45:20 samuel kernel: [31020.001422] [<c0103609>] ?
common_interrupt+0x29/0x30
Nov 15 19:45:20 samuel kernel: [31020.001573] [<c8be5dd4>] ?
acpi_idle_enter_simple+0xf7/0x12d [processor]
Nov 15 19:45:20 samuel kernel: [31020.001630] [<c02685be>] ?
cpuidle_idle_call+0x54/0x86
Nov 15 19:45:20 samuel kernel: [31020.001672] [<c0102337>] ? cpu_idle+0x28/0x41
Nov 15 19:45:20 samuel kernel: [31020.001722] [<c0400925>] ?
start_kernel+0x291/0x294
Nov 15 19:45:20 samuel kernel: [31020.001751] ---[ end trace
755026cb02bd5b9d ]---
-- Package-specific info:
** Version:
Linux version 2.6.30-bpo.2-486 (Debian 2.6.30-8~bpo50+1)
(nobse@debian.org) (gcc version 4.3.2 (Debian 4.3.2-1.1) ) #1 Wed Oct
28 14:04:17 UTC 2009
** Command line:
root=/dev/hda1 ro quiet
** Not tainted
** Kernel log:
[ 20.428432] hda1 hda2 < hda5 >
[ 20.639151] ide-cd: hdc: ATAPI 24X DVD-ROM drive, 512kB Cache
[ 20.639203] Uniform CD-ROM driver Revision: 3.20
[ 20.754018] Initializing USB Mass Storage driver...
[ 20.822612] scsi0 : SCSI emulation for USB Mass Storage devices
[ 20.828512] usbcore: registered new interface driver usb-storage
[ 20.828561] USB Mass Storage support registered.
[ 20.839367] usb-storage: device found at 3
[ 20.839394] usb-storage: waiting for device to settle before scanning
[ 21.588732] PM: Starting manual resume from disk
[ 21.942530] kjournald starting. Commit interval 5 seconds
[ 21.942646] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.848745] usb-storage: device scan complete
[ 25.854859] scsi 0:0:0:0: Direct-Access Seagate FreeAgent Go
102D PQ: 0 ANSI: 4
[ 28.061287] udevd version 125 started
[ 45.231793] Driver 'sd' needs updating - please use bus_type methods
[ 45.411708] yenta_cardbus 0000:00:03.0: CardBus bridge found [1028:0075]
[ 48.266127] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors:
(500 GB/465 GiB)
[ 48.272564] sd 0:0:0:0: [sda] Write Protect is off
[ 48.272705] sd 0:0:0:0: [sda] Mode Sense: 1c 00 00 00
[ 48.272824] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 48.288490] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 48.289256] sda: sda1 sda2 sda3
[ 48.331234] sd 0:0:0:0: [sda] Attached SCSI disk
[ 48.472829] yenta_cardbus 0000:00:03.0: ISA IRQ mask 0x0418, PCI irq 11
[ 48.472868] yenta_cardbus 0000:00:03.0: Socket status: 30000006
[ 48.473920] piix4_smbus 0000:00:01.3: SMBus Host Controller at
0x840, revision 0
[ 48.474758] yenta_cardbus 0000:00:03.1: CardBus bridge found [1028:0075]
[ 48.600832] yenta_cardbus 0000:00:03.1: ISA IRQ mask 0x0418, PCI irq 11
[ 48.600870] yenta_cardbus 0000:00:03.1: Socket status: 30000020
[ 49.034074] input: PC Speaker as /devices/platform/pcspkr/input/input1
[ 49.276155] pcmcia_socket pcmcia_socket1: pccard: CardBus card
inserted into slot 1
[ 49.276314] pci 0000:05:00.0: reg 10 io port: [0x00-0xff]
[ 49.276357] pci 0000:05:00.0: reg 14 32bit mmio: [0x000000-0x00007f]
[ 49.276402] pci 0000:05:00.0: reg 18 32bit mmio: [0x000000-0x00007f]
[ 49.276465] pci 0000:05:00.0: reg 30 32bit mmio: [0x000000-0x01ffff]
[ 49.276554] pci 0000:05:00.0: supports D1 D2
[ 49.276586] pci 0000:05:00.0: PME# supported from D1 D2 D3hot D3cold
[ 49.276621] pci 0000:05:00.0: PME# disabled
[ 53.048806] Marking TSC unstable due to TSC halts in idle
[ 53.049442] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 53.049789] processor ACPI_CPU:00: registered as cooling_device0
[ 53.245875] Synaptics Touchpad, model: 1, fw: 4.2, id: 0x844a1, caps: 0x0/0x0
[ 53.307996] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input2
[ 54.762514] ACPI: AC Adapter [AC] (on-line)
[ 58.383675] ACPI: Battery Slot [BAT0] (battery present)
[ 58.420616] ACPI: Battery Slot [BAT1] (battery absent)
[ 59.103541] Error: Driver 'pcspkr' is already registered, aborting...
[ 71.571110] parport_pc 00:0e: reported by Plug and Play ACPI
[ 71.571243] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
[ 73.131848] input: Video Bus as
/devices/LNXSYSTM:00/device:00/PNP0A03:00/device:0c/input/input3
[ 73.132426] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 73.438284] input: Lid Switch as
/devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
[ 73.569586] ACPI: Lid Switch [LID]
[ 73.570549] input: Power Button as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 73.571000] ACPI: Power Button [PBTN]
[ 73.571854] input: Sleep Button as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
[ 73.572390] ACPI: Sleep Button [SBTN]
[ 83.560179] dcdbas dcdbas: Dell Systems Management Base Driver
(version 5.6.0-3.2)
[ 83.608398] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x100-0x3af: clean.
[ 83.610070] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x3e0-0x4ff: clean.
[ 83.611377] pcmcia_socket pcmcia_socket0: cs: IO port probe
0x820-0x8ff: clean.
[ 83.612747] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xc00-0xcf7: clean.
[ 83.616620] pcmcia_socket pcmcia_socket0: cs: IO port probe
0xa00-0xaff: clean.
[ 83.634631] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x100-0x3af: clean.
[ 83.636433] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x3e0-0x4ff: clean.
[ 83.637679] pcmcia_socket pcmcia_socket1: cs: IO port probe
0x820-0x8ff: clean.
[ 83.638813] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xc00-0xcf7: clean.
[ 83.642684] pcmcia_socket pcmcia_socket1: cs: IO port probe
0xa00-0xaff: clean.
[ 90.354882] 3c59x 0000:05:00.0: enabling device (0000 -> 0003)
[ 90.354966] 3c59x 0000:05:00.0: PCI INT A -> Link[LNKD] -> GSI 11
(level, low) -> IRQ 11
[ 90.355132] 3c59x: Donald Becker and others.
[ 90.355209] 0000:05:00.0: 3Com PCI 3CCFE575CT Tornado CardBus at c8d52000.
[ 90.355261] 3c59x 0000:05:00.0: setting latency timer to 64
[ 99.330141] Adding 232900k swap on /dev/hda5. Priority:-1
extents:1 across:232900k
[ 100.392816] EXT3 FS on hda1, internal journal
[ 103.122793] loop: module loaded
[ 105.376740] kjournald starting. Commit interval 5 seconds
[ 105.394145] EXT3 FS on sda3, internal journal
[ 105.394390] EXT3-fs: mounted filesystem with ordered data mode.
[ 110.334706] eth0: setting full-duplex.
[ 114.059651] CIFS VFS: Error connecting to socket. Aborting operation
[ 114.059805] CIFS VFS: cifs_mount failed w/return code = -111
[ 120.992188] eth0: no IPv6 routers present
[ 130.082065] RPC: Registered udp transport module.
[ 130.082097] RPC: Registered tcp transport module.
[ 130.520333] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 130.973535] svc: failed to register lockdv1 RPC service (errno 97).
[ 130.985644] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state
recovery directory
[ 130.996999] NFSD: starting 90-second grace period
[ 139.997203] Bluetooth: Core ver 2.15
[ 140.069940] NET: Registered protocol family 31
[ 140.069966] Bluetooth: HCI device and connection manager initialized
[ 140.070002] Bluetooth: HCI socket layer initialized
[ 140.291305] Bluetooth: L2CAP ver 2.13
[ 140.291331] Bluetooth: L2CAP socket layer initialized
[ 140.508260] Bluetooth: RFCOMM socket layer initialized
[ 140.508363] Bluetooth: RFCOMM TTY layer initialized
[ 140.508389] Bluetooth: RFCOMM ver 1.11
[ 141.640978] warning: `ntpd' uses 32-bit capabilities (legacy support in use)
** Loaded modules:
Module Size Used by
rfcomm 29244 0
l2cap 17356 5 rfcomm
bluetooth 44576 4 rfcomm,l2cap
nfsd 202484 9
lockd 57300 1 nfsd
nfs_acl 2600 1 nfsd
auth_rpcgss 30536 1 nfsd
sunrpc 158916 8 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3556 1 nfsd
cpufreq_conservative 5996 0
cpufreq_stats 2820 0
cpufreq_userspace 2484 0
cpufreq_powersave 1292 0
nls_utf8 1488 0
cifs 233408 0
nls_base 6208 2 nls_utf8,cifs
loop 13000 0
joydev 8444 0
3c59x 35988 0
mii 4620 1 3c59x
dcdbas 6512 0
pcmcia 23160 0
button 5028 0
video 18000 0
output 2604 1 video
parport_pc 22288 0
parport 30420 1 parport_pc
snd_wavefront 31832 0
snd_cs4236 27180 0
snd_wss_lib 23516 2 snd_wavefront,snd_cs4236
snd_opl3_lib 9136 2 snd_wavefront,snd_cs4236
snd_hwdep 6032 2 snd_wavefront,snd_opl3_lib
snd_mpu401_uart 6124 2 snd_wavefront,snd_cs4236
snd_rawmidi 18572 2 snd_wavefront,snd_mpu401_uart
snd_seq_device 6124 2 snd_opl3_lib,snd_rawmidi
battery 9972 0
snd_pcm 60892 2 snd_cs4236,snd_wss_lib
snd_timer 17196 3 snd_wss_lib,snd_opl3_lib,snd_pcm
ac 3896 0
snd 48344 10
snd_wavefront,snd_cs4236,snd_wss_lib,snd_opl3_lib,snd_hwdep,snd_mpu401_uart,snd_rawmidi,snd_seq_device,snd_pcm,snd_timer
soundcore 5852 1 snd
snd_page_alloc 8096 2 snd_wss_lib,snd_pcm
processor 29612 1
psmouse 42444 0
pcspkr 2068 0
i2c_piix4 9168 0
evdev 7852 0
serio_raw 4480 0
i2c_core 20720 1 i2c_piix4
yenta_socket 21096 3
sd_mod 28588 2
rsrc_nonstatic 9668 1 yenta_socket
crc_t10dif 1632 1 sd_mod
pcmcia_core 31036 3 pcmcia,yenta_socket,rsrc_nonstatic
ext3 104796 2
jbd 36580 1 ext3
mbcache 6568 1 ext3
usb_storage 48320 1
ide_cd_mod 24448 0
cdrom 30348 1 ide_cd_mod
ide_gd_mod 19808 3
ata_generic 4336 0
libata 152012 1 ata_generic
floppy 46140 0
scsi_mod 131968 3 sd_mod,usb_storage,libata
uhci_hcd 18808 0
piix 5656 2
ide_pci_generic 3628 0
usbcore 125312 3 usb_storage,uhci_hcd
ide_core 87504 4 ide_cd_mod,ide_gd_mod,piix,ide_pci_generic
thermal 12572 0
fan 4048 0
thermal_sys 13084 4 video,processor,thermal,fan
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 430TX - 82439TX MTXC
[8086:7100] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
00:01.0 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ISA
[8086:7110] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4
IDE [8086:7111] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
[disabled] [size=1]
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[disabled] [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
[disabled] [size=1]
Region 4: I/O ports at 0860 [size=16]
Kernel driver in use: PIIX_IDE
Kernel modules: piix
00:01.2 USB Controller [0c03]: Intel Corporation 82371AB/EB/MB PIIX4
USB [8086:7112] (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at ece0 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI
[8086:7113] (rev 01)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin ? routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c-piix4
00:02.0 VGA compatible controller [0300]: Neomagic Corporation NM2160
[MagicGraph 128XD] [10c8:0004] (rev 01) (prog-if 00 [VGA controller])
Subsystem: Dell MagicGraph 128XD [1028:0075]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 63750ns max)
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fd000000 (32-bit, prefetchable) [size=16M]
Region 1: Memory at fbe00000 (32-bit, non-prefetchable) [size=2M]
Region 2: Memory at fbd00000 (32-bit, non-prefetchable) [size=1M]
Kernel modules: neofb
00:03.0 CardBus bridge [0607]: Texas Instruments PCI1131 [104c:ac15] (rev 01)
Subsystem: Dell Device [1028:0075]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 16 bytes
Interrupt: pin A routed to IRQ 11
Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
Memory window 0: 10000000-13fff000 (prefetchable)
Memory window 1: 14000000-17fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
00:03.1 CardBus bridge [0607]: Texas Instruments PCI1131 [104c:ac15] (rev 01)
Subsystem: Dell Device [1028:0075]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168, Cache Line Size: 16 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at 20001000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
Memory window 0: 18000000-1bfff000 (prefetchable)
Memory window 1: 1c000000-1ffff000
I/O window 0: 00001800-000018ff
I/O window 1: 00001c00-00001cff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
16-bit legacy interface ports at 0001
Kernel driver in use: yenta_cardbus
Kernel modules: yenta_socket
05:00.0 Ethernet controller [0200]: 3Com Corporation 3cCFE575CT
CardBus [Cyclone] [10b7:5257] (rev 10)
Subsystem: 3Com Corporation FE575C-3Com 10/100 LAN CardBus-Fast
Ethernet [10b7:5c57]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1800 [size=256]
Region 1: Memory at 1c000000 (32-bit, non-prefetchable) [size=128]
Region 2: Memory at 1c000080 (32-bit, non-prefetchable) [size=128]
[virtual] Expansion ROM at 18000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: 3c59x
Kernel modules: 3c59x
-- System Information:
Debian Release: 5.0.3
APT prefers stable
APT policy: (500, 'stable'), (450, 'experimental')
Architecture: i386 (i586)
Kernel: Linux 2.6.30-bpo.2-486
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Versions of packages linux-image-2.6.30-bpo.2-486 depends on:
ii debconf [debconf-2.0] 1.5.24 Debian configuration management sy
ii initramfs-tools [linux-initra 0.92o tools for generating an initramfs
ii module-init-tools 3.4-1 tools for managing Linux kernel mo
linux-image-2.6.30-bpo.2-486 recommends no packages.
Versions of packages linux-image-2.6.30-bpo.2-486 suggests:
ii grub 0.97-47lenny2 GRand Unified Bootloader (Legacy v
pn linux-doc-2.6.30 <none> (no description available)
-- debconf information:
shared/kernel-image/really-run-bootloader: true
linux-image-2.6.30-bpo.2-486/prerm/removing-running-kernel-2.6.30-bpo.2-486:
true
linux-image-2.6.30-bpo.2-486/postinst/bootloader-test-error-2.6.30-bpo.2-486:
linux-image-2.6.30-bpo.2-486/preinst/abort-overwrite-2.6.30-bpo.2-486:
linux-image-2.6.30-bpo.2-486/postinst/depmod-error-2.6.30-bpo.2-486: false
linux-image-2.6.30-bpo.2-486/prerm/would-invalidate-boot-loader-2.6.30-bpo.2-486:
true
linux-image-2.6.30-bpo.2-486/postinst/old-dir-initrd-link-2.6.30-bpo.2-486:
true
linux-image-2.6.30-bpo.2-486/postinst/old-initrd-link-2.6.30-bpo.2-486: true
linux-image-2.6.30-bpo.2-486/preinst/overwriting-modules-2.6.30-bpo.2-486:
true
linux-image-2.6.30-bpo.2-486/preinst/failed-to-move-modules-2.6.30-bpo.2-486:
linux-image-2.6.30-bpo.2-486/postinst/bootloader-error-2.6.30-bpo.2-486:
linux-image-2.6.30-bpo.2-486/postinst/old-system-map-link-2.6.30-bpo.2-486:
true
linux-image-2.6.30-bpo.2-486/postinst/create-kimage-link-2.6.30-bpo.2-486:
true
linux-image-2.6.30-bpo.2-486/postinst/kimage-is-a-directory:
linux-image-2.6.30-bpo.2-486/preinst/bootloader-initrd-2.6.30-bpo.2-486: true
linux-image-2.6.30-bpo.2-486/preinst/lilo-initrd-2.6.30-bpo.2-486: true
linux-image-2.6.30-bpo.2-486/preinst/abort-install-2.6.30-bpo.2-486:
linux-image-2.6.30-bpo.2-486/preinst/elilo-initrd-2.6.30-bpo.2-486: true
linux-image-2.6.30-bpo.2-486/preinst/lilo-has-ramdisk:
linux-image-2.6.30-bpo.2-486/preinst/initrd-2.6.30-bpo.2-486:
linux-image-2.6.30-bpo.2-486/postinst/depmod-error-initrd-2.6.30-bpo.2-486:
false
--
http://steve.kargs.net/
--- End Message ---