[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#841473: linux-image-4.7.0-1-amd64: Nouveau driver stops working freezing system



Package: src:linux
Version: 4.7.6-1
Severity: important

Dear Maintainer,

   * What led up to the situation?

System video froze without any notice, all i could savage from the log files:

Oct 21 00:29:58 elektrum kernel: [98341.161363] nouveau 0000:01:00.0: fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT]
Oct 21 00:29:58 elektrum kernel: [98341.161369] nouveau 0000:01:00.0: fifo: gr engine fault on channel 2, recovering...

   * What exactly did you do (or not do) that was effective (or
     ineffective)?

Video was broken, not even changing video modes (going to the console) worked
This has been happening at random intervals.

Tanking you for your time and attention,

Andre Esteves


-- Package-specific info:
** Version:
Linux version 4.7.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.1 20160904 (Debian 5.4.1-2) ) #1 SMP Debian 4.7.6-1 (2016-10-07)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.7.0-1-amd64 root=/dev/mapper/elektrum--vg-root ro quiet

** Tainted: OE (12288)
 * Out-of-tree module has been loaded.
 * Unsigned module has been loaded.

** Kernel log:
[    6.122988] usb 3-9: New USB device found, idVendor=05e3, idProduct=0608
[    6.122989] usb 3-9: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.122989] usb 3-9: Product: USB2.0 Hub
[    6.123628] hub 3-9:1.0: USB hub found
[    6.123900] hub 3-9:1.0: 4 ports detected
[    6.233897] usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
[    6.250568] usb 4-5: New USB device found, idVendor=067b, idProduct=2773
[    6.250569] usb 4-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    6.250569] usb 4-5: Product: USB3.0 DUAL DOCK 
[    6.250570] usb 4-5: Manufacturer: Prolific
[    6.250570] usb 4-5: SerialNumber: PROLIFICM000000003
[    6.251086] usb 4-5: Set SEL for device-initiated U1 failed.
[    6.251168] usb 4-5: Set SEL for device-initiated U2 failed.
[    6.264676] usb-storage 4-5:1.0: USB Mass Storage device detected
[    6.264714] scsi host10: usb-storage 4-5:1.0
[    6.264754] usbcore: registered new interface driver usb-storage
[    6.265491] usbcore: registered new interface driver uas
[    6.269997] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[    6.361901] usb 3-13: new low-speed USB device number 15 using xhci_hcd
[    6.497420] nouveau 0000:01:00.0: fb1: nouveaufb frame buffer device
[    6.497423] [drm] Initialized nouveau 1.3.1 20120801 for 0000:01:00.0 on minor 1
[    6.558895] usb 3-13: New USB device found, idVendor=045e, idProduct=0780
[    6.558897] usb 3-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.558898] usb 3-13: Product: Comfort Curve Keyboard 3000
[    6.558899] usb 3-13: Manufacturer: Microsoft
[    6.729907] usb 3-14: new low-speed USB device number 16 using xhci_hcd
[    6.896263] usb 3-14: New USB device found, idVendor=1bcf, idProduct=0005
[    6.896265] usb 3-14: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    6.896266] usb 3-14: Product: USB Optical Mouse
[    6.913253] hidraw: raw HID events driver (C) Jiri Kosina
[    6.925224] media: Linux media interface: v0.10
[    6.926292] Bluetooth: Core ver 2.21
[    6.926306] NET: Registered protocol family 31
[    6.926307] Bluetooth: HCI device and connection manager initialized
[    6.926309] Bluetooth: HCI socket layer initialized
[    6.926311] Bluetooth: L2CAP socket layer initialized
[    6.926316] Bluetooth: SCO socket layer initialized
[    6.929517] usblp 3-5.1.1:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
[    6.929540] usbcore: registered new interface driver usblp
[    6.929665] Linux video capture interface: v2.00
[    6.930036] usbcore: registered new interface driver btusb
[    6.939646] usbcore: registered new interface driver usbhid
[    6.939647] usbhid: USB HID core driver
[    6.940890] input: Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.1/3-5.1.2/3-5.1.2:1.0/0003:0F03:0001.0001/input/input24
[    6.965120] usb 3-5.3: set resolution quirk: cval->res = 384
[    6.965375] usbcore: registered new interface driver snd-usb-audio
[    6.965376] uvcvideo: Found UVC 1.00 device HD Webcam C525 (046d:0826)
[    6.977518] uvcvideo 3-5.3:1.2: Entity type for entity Extension 5 was not initialized!
[    6.977520] uvcvideo 3-5.3:1.2: Entity type for entity Camera 1 was not initialized!
[    6.977522] uvcvideo 3-5.3:1.2: Entity type for entity Extension 6 was not initialized!
[    6.977523] uvcvideo 3-5.3:1.2: Entity type for entity Extension 7 was not initialized!
[    6.977524] uvcvideo 3-5.3:1.2: Entity type for entity Extension 8 was not initialized!
[    6.977638] input: HD Webcam C525 as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5.3/3-5.3:1.2/input/input25
[    6.994083] hid-generic 0003:0F03:0001.0001: input,hidraw0: USB HID v1.00 Gamepad [Ver 1.0 USB To RS232 Interface (V1.0) BaudRate 2400bps] on usb-0000:00:14.0-5.1.2/input0
[    6.994131] usbcore: registered new interface driver uvcvideo
[    6.994133] USB Video Class driver (1.1.1)
[    6.994214] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.0/0003:045E:0780.0002/input/input26
[    7.050043] hid-generic 0003:045E:0780.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:14.0-13/input0
[    7.051245] input: Microsoft Comfort Curve Keyboard 3000 as /devices/pci0000:00/0000:00:14.0/usb3/3-13/3-13:1.1/0003:045E:0780.0003/input/input27
[    7.105982] hid-generic 0003:045E:0780.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 3000] on usb-0000:00:14.0-13/input1
[    7.106053] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-14/3-14:1.0/0003:1BCF:0005.0004/input/input28
[    7.106112] hid-generic 0003:1BCF:0005.0004: input,hidraw3: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-14/input0
[    7.134965] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.134966] Bluetooth: BNEP filters: protocol multicast
[    7.134969] Bluetooth: BNEP socket layer initialized
[    7.278191] scsi 10:0:0:0: Direct-Access     TOSHIBA  MK3265GSXN       GH10 PQ: 0 ANSI: 0
[    7.278537] scsi 10:0:0:1: Direct-Access     TOSHIBA  MK5076GSX        GS00 PQ: 0 ANSI: 0
[    7.278880] sd 10:0:0:0: Attached scsi generic sg4 type 0
[    7.279032] sd 10:0:0:1: Attached scsi generic sg5 type 0
[    7.279044] sd 10:0:0:0: [sdd] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    7.279322] sd 10:0:0:0: [sdd] Write Protect is off
[    7.279323] sd 10:0:0:0: [sdd] Mode Sense: 03 00 00 00
[    7.279448] sd 10:0:0:1: [sde] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    7.279642] sd 10:0:0:0: [sdd] No Caching mode page found
[    7.279644] sd 10:0:0:0: [sdd] Assuming drive cache: write through
[    7.279847] sd 10:0:0:1: [sde] Write Protect is off
[    7.279850] sd 10:0:0:1: [sde] Mode Sense: 03 00 00 00
[    7.280129] sd 10:0:0:1: [sde] No Caching mode page found
[    7.280132] sd 10:0:0:1: [sde] Assuming drive cache: write through
[    9.291991] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[    9.292020] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.468347] systemd[1]: apparmor.service: Cannot add dependency job, ignoring: Unit apparmor.service is masked.
[   11.271661]  sde: sde1
[   11.294765] sd 10:0:0:1: [sde] Attached SCSI disk
[   11.329600]  sdd: sdd1
[   11.330923] sd 10:0:0:0: [sdd] Attached SCSI disk
[   12.013120] usblp0: removed
[   12.019976] usblp 3-5.1.1:1.0: usblp0: USB Bidirectional printer dev 8 if 0 alt 0 proto 2 vid 0x04F9 pid 0x0027
[   15.052735] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[   15.055194] vboxdrv: Found 8 processor cores
[   15.074208] vboxdrv: TSC mode is Invariant, tentative frequency 3497962446 Hz
[   15.074211] vboxdrv: Successfully loaded version 5.1.6_Debian (interface 0x00260000)
[   15.077022] VBoxNetFlt: Successfully started.
[   15.079386] VBoxNetAdp: Successfully started.
[   15.081751] VBoxPciLinuxInit
[   15.082531] vboxpci: IOMMU not found (not registered)
[   50.941137] usb 3-5.3: reset high-speed USB device number 10 using xhci_hcd
[   51.414966] Bluetooth: RFCOMM TTY layer initialized
[   51.414972] Bluetooth: RFCOMM socket layer initialized
[   51.414977] Bluetooth: RFCOMM ver 1.11

** Model information
sys_vendor: ASUS
product_name: All Series
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 0801
board_vendor: ASUSTeK COMPUTER INC.
board_name: SABERTOOTH Z87
board_version: Rev 1.xx

** Loaded modules:
rfcomm
pci_stub
vboxpci(OE)
vboxnetadp(OE)
vboxnetflt(OE)
vboxdrv(OE)
bnep
joydev
hid_generic
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_v4l2
videobuf2_core
snd_usb_audio
btusb
videodev
btrtl
snd_usbmidi_lib
btbcm
btintel
snd_rawmidi
usblp
snd_seq_device
media
bluetooth
usbhid
hid
uas
usb_storage
intel_rapl
x86_pkg_temp_thermal
intel_powerclamp
coretemp
snd_hda_codec_hdmi
kvm_intel
kvm
eeepc_wmi
asus_wmi
sparse_keymap
rfkill
evdev
iTCO_wdt
irqbypass
iTCO_vendor_support
crct10dif_pclmul
crc32_pclmul
snd_hda_codec_realtek
nouveau
i915
ghash_clmulni_intel
snd_hda_codec_generic
serio_raw
pcspkr
i2c_i801
mxm_wmi
sg
ttm
lpc_ich
snd_hda_intel
mfd_core
snd_hda_codec
drm_kms_helper
snd_hda_core
snd_hwdep
drm
snd_pcm
snd_timer
mei_me
battery
snd
mei
soundcore
i2c_algo_bit
shpchp
video
wmi
soc_button_array
tpm_infineon
button
tpm_tis
tpm
parport_pc
sunrpc
ppdev
lp
parport
ip_tables
x_tables
autofs4
ext4
ecb
crc16
jbd2
mbcache
raid10
raid456
async_raid6_recov
async_memcpy
async_pq
async_xor
async_tx
xor
raid6_pq
libcrc32c
crc32c_generic
raid0
multipath
linear
dm_mod
raid1
md_mod
sr_mod
sd_mod
cdrom
crc32c_intel
aesni_intel
aes_x86_64
ahci
glue_helper
lrw
libahci
gf128mul
ablk_helper
cryptd
xhci_pci
libata
xhci_hcd
psmouse
ehci_pci
ehci_hcd
e1000e
usbcore
scsi_mod
ptp
pps_core
usb_common
thermal
fan
fjes

** Network interface configuration:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 74:d0:2b:2b:74:a0 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.10/24 brd 192.168.1.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::6d21:6b22:8dbb:b427/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
  eth0: 6530208    5768    0    0    0     0          0        11   350813    3099    0    0    0     0       0          0
    lo:   13298     166    0    0    0     0          0         0    13298     166    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    Forwarding: 2
    3702 total packets received
    0 forwarded
    0 incoming packets discarded
    3702 incoming packets delivered
    3180 requests sent out
    40 outgoing packets dropped
    2 dropped because of missing route
Icmp:
    80 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 80
    83 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 83
IcmpMsg:
        InType3: 80
        OutType3: 83
Tcp:
    32 active connections openings
    0 passive connection openings
    2 failed connection attempts
    0 connection resets received
    7 connections established
    3190 segments received
    2855 segments send out
    0 segments retransmited
    0 bad segments received.
    39 resets sent
Udp:
    196 packets received
    83 packets to unknown port received.
    0 packet receive errors
    254 packets sent
    0 receive buffer errors
    0 send buffer errors
    IgnoredMulti: 164
UdpLite:
TcpExt:
    8 TCP sockets finished time wait in fast timer
    154 delayed acks sent
    Quick ack mode was activated 2 times
    1 packets directly queued to recvmsg prequeue.
    TCPDirectCopyFromPrequeue: 294
    2693 packet headers predicted
    1 packets header predicted and directly queued to user
    139 acknowledgments not containing data payload received
    427 predicted acknowledgments
    TCPDSACKOldSent: 2
    1 connections reset due to unexpected data
    TCPSackShiftFallback: 1
    TCPRcvCoalesce: 239
    TCPOFOQueue: 1
    TCPAutoCorking: 8
    TCPOrigDataSent: 701
    TCPKeepAlive: 65
IpExt:
    InMcastPkts: 52
    OutMcastPkts: 43
    InBcastPkts: 191
    OutBcastPkts: 27
    InOctets: 6346888
    OutOctets: 282897
    InMcastOctets: 23171
    OutMcastOctets: 22754
    InBcastOctets: 36717
    OutBcastOctets: 3753
    InNoECTPkts: 5905


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
	Subsystem: ASUSTeK Computer Inc. 4th Gen Core Processor DRAM Controller [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: hsw_uncore

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 24
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: e0000000-eb0fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:02.0 Display controller [0380]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06)
	DeviceName:  Onboard IGD
	Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [1043:8534]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 36
	Region 0: Memory at eb400000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at f000 [size=64]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
	Subsystem: ASUSTeK Computer Inc. Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 37
	Region 0: Memory at eba34000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
	Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family USB xHCI [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at eba20000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
	Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family MEI Controller [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 33
	Region 0: Memory at eba3f000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-V [8086:153b] (rev 04)
	DeviceName:  Onboard LAN
	Subsystem: ASUSTeK Computer Inc. Ethernet Connection I217-V [1043:859f]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at eba00000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at eba3d000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at f080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e
	Kernel modules: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family USB EHCI [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at eba3c000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
	Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset High Definition Audio Controller [1043:8560]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 34
	Region 0: Memory at eba30000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 25
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #4 [8086:8c16] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 26
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: eb900000-eb9fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.7 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #8 [8086:8c1e] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 27
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: eb800000-eb8fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family USB EHCI [1043:8534]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at eba3b000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:1f.0 ISA bridge [0601]: Intel Corporation Z87 Express LPC Controller [8086:8c44] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Z87 Express LPC Controller [1043:8534]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [1043:8534]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 30
	Region 0: I/O ports at f0d0 [size=8]
	Region 1: I/O ports at f0c0 [size=4]
	Region 2: I/O ports at f0b0 [size=8]
	Region 3: I/O ports at f0a0 [size=4]
	Region 4: I/O ports at f060 [size=32]
	Region 5: Memory at eba3a000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
	Subsystem: ASUSTeK Computer Inc. 8 Series/C220 Series Chipset Family SMBus Controller [1043:8534]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at eba39000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at f040 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK110 [GeForce GTX 780] [10de:1004] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: eVga.com. Corp. GK110 [GeForce GTX 780] [3842:2784]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 35
	Region 0: Memory at ea000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at e0000000 (64-bit, prefetchable) [size=128M]
	Region 3: Memory at e8000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at e000 [size=128]
	Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau
	Kernel modules: nouveau

01:00.1 Audio device [0403]: NVIDIA Corporation GK110 HDMI Audio [10de:0e1a] (rev a1)
	Subsystem: eVga.com. Corp. GK110 HDMI Audio [3842:2784]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at eb080000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

03:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. ASM1062 Serial ATA Controller [1043:858d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 31
	Region 0: I/O ports at d050 [size=8]
	Region 1: I/O ports at d040 [size=4]
	Region 2: I/O ports at d030 [size=8]
	Region 3: I/O ports at d020 [size=4]
	Region 4: I/O ports at d000 [size=32]
	Region 5: Memory at eb900000 (32-bit, non-prefetchable) [size=512]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

04:00.0 SATA controller [0106]: ASMedia Technology Inc. ASM1062 Serial ATA Controller [1b21:0612] (rev 01) (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. ASM1062 Serial ATA Controller [1043:858e]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 32
	Region 0: I/O ports at c050 [size=8]
	Region 1: I/O ports at c040 [size=4]
	Region 2: I/O ports at c030 [size=8]
	Region 3: I/O ports at c020 [size=4]
	Region 4: I/O ports at c000 [size=32]
	Region 5: Memory at eb800000 (32-bit, non-prefetchable) [size=512]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci


** USB devices:
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 067b:2773 Prolific Technology, Inc. PL2773 SATAII bridge controller
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 014: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 003 Device 004: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 003 Device 010: ID 046d:0826 Logitech, Inc. HD Webcam C525
Bus 003 Device 007: ID 08e6:3437 Gemalto (was Gemplus) GemPC Twin SmartCard Reader
Bus 003 Device 011: ID 0f03:0001 Unitek UPS Systems Alpha 1200Sx
Bus 003 Device 008: ID 04f9:0027 Brother Industries, Ltd HL-2030 Laser Printer
Bus 003 Device 005: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 003 Device 003: ID 05e3:0608 Genesys Logic, Inc. Hub
Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 003 Device 016: ID 1bcf:0005 Sunplus Innovation Technology Inc. Optical Mouse
Bus 003 Device 015: ID 045e:0780 Microsoft Corp. Comfort Curve Keyboard 3000
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: stretch/sid
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'testing')
Architecture: amd64 (x86_64)

Kernel: Linux 4.7.0-1-amd64 (SMP w/8 CPU cores)
Locale: LANG=pt_PT.UTF-8, LC_CTYPE=pt_PT.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.7.0-1-amd64 depends on:
ii  initramfs-tools [linux-initramfs-tool]  0.125
ii  kmod                                    22-1.1
ii  linux-base                              4.5

Versions of packages linux-image-4.7.0-1-amd64 recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2

Versions of packages linux-image-4.7.0-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-36
pn  linux-doc-4.7           <none>

Versions of packages linux-image-4.7.0-1-amd64 is related to:
pn  firmware-amd-graphics     <none>
pn  firmware-atheros          <none>
pn  firmware-bnx2             <none>
pn  firmware-bnx2x            <none>
pn  firmware-brcm80211        <none>
pn  firmware-cavium           <none>
pn  firmware-intel-sound      <none>
pn  firmware-intelwimax       <none>
pn  firmware-ipw2x00          <none>
pn  firmware-ivtv             <none>
pn  firmware-iwlwifi          <none>
pn  firmware-libertas         <none>
pn  firmware-linux-nonfree    <none>
pn  firmware-misc-nonfree     <none>
pn  firmware-myricom          <none>
pn  firmware-netxen           <none>
pn  firmware-qlogic           <none>
pn  firmware-realtek          <none>
pn  firmware-samsung          <none>
pn  firmware-siano            <none>
pn  firmware-ti-connectivity  <none>
pn  xen-hypervisor            <none>

-- no debconf information


Reply to: