Bug#835670: MAC address of the network card keeps changing in each reboot
Package: src:linux
Version: 3.16.7-ckt25-2
Severity: important
Tags: upstream
Hi,
This machine has two ethernet cards.
$ lspci -nn | grep Ether
02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet
[1969:1091] (rev 10)
03:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
I use AR8161 as default network interface card. The problem is each time system
boots, AR8161's MAC address changes.
[ 1.579415] alx 0000:02:00.0 eth1: Qualcomm Atheros AR816x/AR817x Ethernet
[02:ec:0d:e1:fe:8a]
[ 97.262720] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 97.263491] alx 0000:02:00.0 eth1: NIC Up: 100 Mbps Full
[ 97.263687] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 560.923170] alx 0000:02:00.0 eth1: NIC Up: 100 Mbps Full
[ 1061.098093] alx 0000:02:00.0 eth1: NIC Up: 100 Mbps Full
[17500.371445] alx 0000:02:00.0 eth1: NIC Up: 100 Mbps Full
I made a udevd file to create permanent network interface device for two cards.
But AR8161 becomes eth1 not eth0 which I assigned. In rare occasion, network
connection gets lost after reboot or resume from hibernation.
$ more 70-persistent-net.rules
# This file was automatically generated by the /lib/udev/write_net_rules
# program, run by the persistent-net-generator.rules rules file.
#
# You can modify it, as long as you keep each rule on a single
# line, and change only the value of the NAME= key.
# lspci -nn | grep Eth
# Retrieve MAC address of each adapter
# udevadm info -a -p /sys/class/net/eth0 [eth1]
# ifconfig -a
# or
# ifconfig eth0 [eth1]
# Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091]
# Kernel module: alx
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="a2:71:b7:12:2d:c
0", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth0"
# Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter
# Kernel module: 8139too
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*",
ATTR{address}=="00:0e:e8:de:d2:e
9", ATTR{dev_id}=="0x0", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"
When I changed eth1 to eth0 in /etc/network/interfaces file, the system lost
network connection because eth0 was assigned to Realteck ethernet card and the
network cable wasn't plugged in. So I forced to get back to eth1.
$ more interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto eth1
# iface lo inet loopback
# The primary network interface
# eth1 is wrong? (8/27/2016)
# allow-hotplug eth0
iface eth1 inet static
address 192.168.1.100
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
Does MAC address alignment problem is related to floating MAC address I've
experienced for three years since 2013?
http://code.metager.de/source/history/linux/stable/drivers/net/ethernet/atheros/alx/hw.c
alx: fix MAC address alignment problem
In two places, parts of MAC addresses are used as u32/u16
values. This can cause alignment problems, use put_unaligned
and get_unaligned to fix this.
Reported-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Kernel 4.6.0's alx module has the same problem too. I tested it yesterday.
The network driver should access the factory MAC address of ethernet card, use
it to create a network interface device in consistent manner.
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08)
** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/main--vg-root ro quiet
** Not tainted
** Kernel log:
[ 1060.004897] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1060.006030] ata6.00: configured for UDMA/133
[ 1060.016879] usb 1-4: reset high-speed USB device number 4 using ehci-pci
[ 1060.040896] usb 3-1: reset full-speed USB device number 2 using ohci-pci
[ 1060.432956] usb 1-4.4: reset high-speed USB device number 5 using ehci-pci
[ 1060.481109] usb 3-3: reset low-speed USB device number 3 using ohci-pci
[ 1060.813373] PM: restore of devices complete after 1298.665 msecs
[ 1060.813579] PM: Image restored successfully.
[ 1060.813597] PM: Basic memory bitmaps freed
[ 1060.813598] Restarting tasks ... done.
[ 1061.098093] alx 0000:02:00.0 eth1: NIC Up: 100 Mbps Full
[17497.796600] PM: Syncing filesystems ... done.
[17497.829749] Freezing user space processes ... (elapsed 0.001 seconds) done.
[17497.831260] PM: Marking nosave pages: [mem 0x0009f000-0x000fffff]
[17497.831264] PM: Marking nosave pages: [mem 0x8fe80000-0xffffffff]
[17497.832091] PM: Marking nosave pages: [mem 0x84000000-0x87ffffff]
[17497.832352] PM: Basic memory bitmaps created
[17497.832372] PM: Preallocating image memory... done (allocated 297152 pages)
[17498.114173] PM: Allocated 1188608 kbytes in 0.28 seconds (4245.02 MB/s)
[17498.114175] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[17498.115476] Suspending console(s) (use no_console_suspend to debug)
[17498.116011] serial 00:02: disabled
[17498.116015] serial 00:02: System wakeup disabled by ACPI
[17498.241472] PM: freeze of devices complete after 125.954 msecs
[17498.241868] PM: late freeze of devices complete after 0.394 msecs
[17498.242664] PM: noirq freeze of devices complete after 0.795 msecs
[17498.243444] ACPI: Preparing to enter system sleep state S4
[17498.245056] PM: Saving platform NVS memory
[17498.245203] Disabling non-boot CPUs ...
[17498.246540] kvm: disabling virtualization on CPU1
[17498.246546] smpboot: CPU 1 is now offline
[17498.248541] kvm: disabling virtualization on CPU2
[17498.349334] smpboot: CPU 2 is now offline
[17498.350817] kvm: disabling virtualization on CPU3
[17498.350829] smpboot: CPU 3 is now offline
[17498.352340] kvm: disabling virtualization on CPU4
[17498.453362] smpboot: CPU 4 is now offline
[17498.454746] kvm: disabling virtualization on CPU5
[17498.557390] smpboot: CPU 5 is now offline
[17498.557669] PM: Creating hibernation image:
[17498.769761] PM: Need to copy 304785 pages
[17498.769763] PM: Normal pages needed: 304785 + 1024, available pages: 1509098
[17498.559333] PM: Restoring platform NVS memory
[17498.559395] PCI-DMA: Resuming GART IOMMU
[17498.559396] PCI-DMA: Restoring GART aperture settings
[17498.559586] LVT offset 0 assigned for vector 0x400
[17498.559670] Enabling non-boot CPUs ...
[17498.559771] x86: Booting SMP configuration:
[17498.559772] smpboot: Booting Node 0 Processor 1 APIC 0x11
[17498.571218] kvm: enabling virtualization on CPU1
[17498.573563] CPU1 is up
[17498.573641] smpboot: Booting Node 0 Processor 2 APIC 0x12
[17498.584606] kvm: enabling virtualization on CPU2
[17498.586853] CPU2 is up
[17498.586928] smpboot: Booting Node 0 Processor 3 APIC 0x13
[17498.597892] kvm: enabling virtualization on CPU3
[17498.600162] CPU3 is up
[17498.600233] smpboot: Booting Node 0 Processor 4 APIC 0x14
[17498.611196] kvm: enabling virtualization on CPU4
[17498.613465] CPU4 is up
[17498.613533] smpboot: Booting Node 0 Processor 5 APIC 0x15
[17498.624502] kvm: enabling virtualization on CPU5
[17498.626820] CPU5 is up
[17498.637360] ACPI: Waking up from system sleep state S4
[17498.651547] PM: noirq restore of devices complete after 12.728 msecs
[17498.652428] PM: early restore of devices complete after 0.836 msecs
[17498.751388] serial 00:02: activated
[17498.753118] sd 5:0:0:0: [sda] Starting disk
[17498.756917] alx 0000:02:00.0: irq 41 for MSI/MSI-X
[17498.759465] [drm] PCIE GART of 512M enabled (table at 0x00000000C0040000).
[17498.759513] radeon 0000:01:05.0: WB enabled
[17498.759515] radeon 0000:01:05.0: fence driver on ring 0 use gpu addr 0x00000000a0000c00 and cpu addr 0xffff88022423ac00
[17498.791279] [drm] ring test on 0 succeeded in 1 usecs
[17498.791295] [drm] ib test on ring 0 succeeded in 0 usecs
[17498.807637] usb usb5: root hub lost power or was reset
[17498.807698] usb usb6: root hub lost power or was reset
[17498.807699] usb usb3: root hub lost power or was reset
[17498.807703] usb usb4: root hub lost power or was reset
[17498.807731] usb usb7: root hub lost power or was reset
[17498.807749] usb usb1: root hub lost power or was reset
[17498.807763] usb usb2: root hub lost power or was reset
[17499.067683] ata5: SATA link down (SStatus 0 SControl 300)
[17499.067738] ata4: SATA link down (SStatus 0 SControl 300)
[17499.071683] ata3: SATA link down (SStatus 0 SControl 300)
[17499.239726] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[17499.240825] ata6.00: configured for UDMA/133
[17499.247738] usb 1-4: reset high-speed USB device number 4 using ehci-pci
[17499.419782] usb 3-3: reset low-speed USB device number 3 using ohci-pci
[17499.663852] usb 1-4.4: reset high-speed USB device number 5 using ehci-pci
[17499.859896] usb 3-1: reset full-speed USB device number 2 using ohci-pci
[17500.028227] PM: restore of devices complete after 1278.902 msecs
[17500.028430] PM: Image restored successfully.
[17500.028450] PM: Basic memory bitmaps freed
[17500.028451] Restarting tasks ... done.
[17500.371445] alx 0000:02:00.0 eth1: NIC Up: 100 Mbps Full
[20762.395441] usb 1-4.4-port3: Cannot enable. Maybe the USB cable is bad?
[20763.227810] usb 1-4.4-port3: Cannot enable. Maybe the USB cable is bad?
[20764.060037] usb 1-4.4-port3: Cannot enable. Maybe the USB cable is bad?
[20764.892122] usb 1-4.4-port3: Cannot enable. Maybe the USB cable is bad?
[20764.892492] usb 1-4.4-port3: unable to enumerate USB device
** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 1201
board_vendor: ASUSTeK Computer INC.
board_name: M5A78L-M LX3
board_version: Rev X.0x
** Loaded modules:
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
parport_pc
ppdev
lp
parport
joydev
hid_generic
kvm_amd
kvm
usbhid
crc32_pclmul
aesni_intel
hid
wacom
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
snd_hda_codec_realtek
snd_hda_codec_generic
cryptd
pcspkr
evdev
serio_raw
radeon
ttm
drm_kms_helper
drm
snd_hda_intel
snd_hda_controller
snd_hda_codec
snd_hwdep
snd_pcm
snd_timer
snd
i2c_algo_bit
wmi
fam15h_power
edac_mce_amd
shpchp
k10temp
soundcore
asus_atk0110
sp5100_tco
edac_core
i2c_piix4
button
i2c_core
acpi_cpufreq
processor
thermal_sys
ext4
crc16
mbcache
jbd2
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_generic
ata_generic
ohci_pci
crct10dif_pclmul
crct10dif_common
crc32c_intel
ahci
psmouse
pata_atiixp
libahci
ehci_pci
ohci_hcd
ehci_hcd
8139too
8139cp
libata
mii
usbcore
scsi_mod
usb_common
alx
mdio
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto eth1
# iface lo inet loopback
# The primary network interface
# eth1 is wrong? (8/27/2016)
# allow-hotplug eth0
iface eth1 inet static
address 192.168.1.100
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
#IPv6 address
#iface eth1 inet6 static
# address 2001:db8::c0ca:1eaf
# netmask 64
# gateway 2001:db8::1ead:ed:beef
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: rename2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:0e:e8:de:d2:e9 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 02:ec:0d:e1:fe:8a brd ff:ff:ff:ff:ff:ff
inet 192.168.1.100/24 brd 192.168.1.255 scope global eth1
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth1: 287100260 256749 0 0 0 0 0 382 110172225 218590 0 0 0 0 0 0
rename2: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
lo: 100 2 0 0 0 0 0 0 100 2 0 0 0 0 0 0
*** Protocol statistics:
Ip:
251425 total packets received
0 forwarded
0 incoming packets discarded
251425 incoming packets delivered
218250 requests sent out
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
30 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 30
IcmpMsg:
OutType3: 30
Tcp:
3792 active connections openings
0 passive connection openings
1 failed connection attempts
17 connection resets received
0 connections established
249784 segments received
216806 segments send out
157 segments retransmited
63 bad segments received.
1407 resets sent
InCsumErrors: 1
Udp:
1223 packets received
30 packets to unknown port received.
0 packet receive errors
1257 packets sent
UdpLite:
TcpExt:
2451 TCP sockets finished time wait in fast timer
1 packets rejects in established connections because of timestamp
1603 delayed acks sent
1 delayed acks further delayed because of locked socket
Quick ack mode was activated 258 times
3 packets directly queued to recvmsg prequeue.
2 bytes directly received in process context from prequeue
186064 packet headers predicted
8510 acknowledgments not containing data payload received
31992 predicted acknowledgments
1 times recovered from packet loss by selective acknowledgements
35 congestion windows recovered without slow start after partial ack
1 fast retransmits
1 retransmits in slow start
48 other TCP timeouts
TCPLossProbes: 86
TCPLossProbeRecovery: 52
228 DSACKs sent for old packets
28 DSACKs sent for out of order packets
55 DSACKs received
387 connections reset due to unexpected data
1 connections reset due to early user close
3 connections aborted due to timeout
TCPDSACKIgnoredNoUndo: 43
TCPSackShiftFallback: 9
TCPRcvCoalesce: 11316
TCPOFOQueue: 5716
TCPOFOMerge: 29
TCPChallengeACK: 64
TCPSYNChallenge: 62
TCPAutoCorking: 1244
TCPSynRetrans: 35
TCPOrigDataSent: 78121
IpExt:
InMcastPkts: 382
InBcastPkts: 6
InOctets: 283239050
OutOctets: 107031806
InMcastOctets: 10696
InBcastOctets: 1973
InNoECTPkts: 255918
InECT0Pkts: 467
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge [1022:9600]
Subsystem: ASUSTeK Computer Inc. Device [1043:8388]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: ASUSTeK Computer Inc. AMD RS780/RS880 PCI to PCI bridge (int gfx) [1043:9602] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fe800000-fe9fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780/RS880 PCI to PCI bridge (PCIE port 0) [1022:9604] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fea00000-feafffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at b000 [size=8]
Region 1: I/O ports at a000 [size=4]
Region 2: I/O ports at 9000 [size=8]
Region 3: I/O ports at 8000 [size=4]
Region 4: I/O ports at 7000 [size=16]
Region 5: Memory at fe7ffc00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7fe000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7fd000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe7ff800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe7fc000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe7fb000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe7ff400 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 3c)
Subsystem: ASUSTeK Computer Inc. M4A785TD Motherboard [1043:8389]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at ff00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: ASUSTeK Computer Inc. Device [1043:8445]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe7f4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: feb00000-febfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8389]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe7fa000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 0 [1022:1600]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 1 [1022:1601]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 2 [1022:1602]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 3 [1022:1603]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k10temp
00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 4 [1022:1604]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Kernel driver in use: fam15h_power
00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 15h Processor Function 5 [1022:1605]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS780L [Radeon 3000] [1002:9616] (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8388]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
Region 1: I/O ports at c000 [size=256]
Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
Region 5: Memory at fe800000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
02:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8161 Gigabit Ethernet [1969:1091] (rev 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:8507]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR+ <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at feac0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at dc00 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
03:05.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (8000ns min, 16000ns max)
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at e800 [size=256]
Region 1: Memory at febffc00 (32-bit, non-prefetchable) [size=256]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: 8139too
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 050d:706a Belkin Components 2-N-1 7-Port Hub (Upper half)
Bus 001 Device 004: ID 050d:0706 Belkin Components 2-N-1 7-Port Hub (Lower half)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 04b4:0101 Cypress Semiconductor Corp. Keyboard/Hub
Bus 003 Device 002: ID 056a:0017 Wacom Co., Ltd CTE-450 [Bamboo Fun]
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.2
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/6 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_US.UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120+deb8u2
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22+deb8u1
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
* linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
Reply to: