Bug#834218: cx23885: input (IR) not working since 4.5
Package: src:linux
Version: 4.6.4-1
Severity: important
Dear Maintainer,
I'm using TerraTec Cinergy T PCIe Dual on my HTPC and since linux 4.5 the IR
stopped working.
As I'm using this system as an HTPC a working remote is important for me.
I found this to be present in
linux-image-4.5.0-2-amd64 4.5.5-1
linux-image-4.6.0-1-amd64 4.6.4-1
linux-image-4.7.0-rc7-amd64 4.7~rc7-1~exp1
Working (tested) kernels are
ii linux-image-4.3.0-1-amd64 4.3.5-1
ii linux-image-4.4.0-1-amd64 4.4.6-1
After analyzing the dmesg outputs I found that the protocol handlers no longer
get initialized.
dmesg 4.4 (working):
[ 4.559594] Registered IR keymap rc-nec-terratec-cinergy-xs
[ 4.559676] input: cx23885 IR (TerraTec Cinergy T PCIe Dual) as
/devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0/input23
[ 4.563300] rc0: cx23885 IR (TerraTec Cinergy T PCIe Dual) as
/devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0
[ 4.564118] IR NEC protocol handler initialized
[ 4.564534] IR RC5(x/sz) protocol handler initialized
[ 4.564846] IR RC6 protocol handler initialized
[ 4.565874] IR SANYO protocol handler initialized
[ 4.566073] IR JVC protocol handler initialized
[ 4.566185] IR Sony protocol handler initialized
[ 4.567126] IR Sharp protocol handler initialized
[ 4.567305] IR MCE Keyboard/mouse protocol handler initialized
[ 4.568337] input: MCE IR Keyboard/Mouse (cx23885) as
/devices/virtual/input/input24
[ 4.568517] lirc_dev: IR Remote Control driver registered, major 247
[ 4.569329] IR XMP protocol handler initialized
[ 4.569521] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at
minor = 0
[ 4.569523] IR LIRC bridge handler initialized
dmesg 4.5 (not working)
[ 5.165938] Registered IR keymap rc-nec-terratec-cinergy-xs
[ 5.166035] input: cx23885 IR (TerraTec Cinergy T PCIe Dual) as
/devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0/input23
[ 5.169580] rc rc0: cx23885 IR (TerraTec Cinergy T PCIe Dual) as
/devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0
[ 5.172476] lirc_dev: IR Remote Control driver registered, major 246
[ 5.173387] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at
minor = 0
[ 5.173390] IR LIRC bridge handler initialized
Please ignore the "drxk: Error -22 on get_lock_status" messages, since I'm only
using the card for the IR and not for DVB.
-- Package-specific info:
** Version:
Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-amd64 root=UUID=109fca5d-2cc6-4811-8e5d-4daa845c9384 ro quiet splash
** Tainted: E (8192)
* Unsigned module has been loaded (currently expected).
** Kernel log:
[ 3618.138222] drxk: Error -22 on get_lock_status
[ 3619.150183] drxk: Error -22 on get_lock_status
[ 3620.162094] drxk: Error -22 on get_lock_status
[ 3621.174008] drxk: Error -22 on get_lock_status
[ 3622.185935] drxk: Error -22 on get_lock_status
[ 3623.197866] drxk: Error -22 on get_lock_status
[ 3624.209792] drxk: Error -22 on get_lock_status
[ 3625.221738] drxk: Error -22 on get_lock_status
[ 3626.234740] drxk: Error -22 on get_lock_status
[ 3627.246598] drxk: Error -22 on get_lock_status
[ 3628.258547] drxk: Error -22 on get_lock_status
[ 3629.270552] drxk: Error -22 on get_lock_status
[ 3630.282460] drxk: Error -22 on get_lock_status
[ 3631.295270] drxk: Error -22 on get_lock_status
[ 3632.307229] drxk: Error -22 on get_lock_status
[ 3633.319122] drxk: Error -22 on get_lock_status
[ 3634.331064] drxk: Error -22 on get_lock_status
[ 3635.343982] drxk: Error -22 on get_lock_status
[ 3636.355930] drxk: Error -22 on get_lock_status
[ 3637.367907] drxk: Error -22 on get_lock_status
[ 3638.379841] drxk: Error -22 on get_lock_status
[ 3639.391786] drxk: Error -22 on get_lock_status
[ 3640.403738] drxk: Error -22 on get_lock_status
[ 3641.415627] drxk: Error -22 on get_lock_status
[ 3642.427539] drxk: Error -22 on get_lock_status
[ 3643.440508] drxk: Error -22 on get_lock_status
[ 3644.455531] drxk: Error -22 on get_lock_status
[ 3645.467470] drxk: Error -22 on get_lock_status
[ 3646.479383] drxk: Error -22 on get_lock_status
[ 3647.492093] drxk: Error -22 on get_lock_status
[ 3648.504068] drxk: Error -22 on get_lock_status
[ 3649.516022] drxk: Error -22 on get_lock_status
[ 3650.527960] drxk: Error -22 on get_lock_status
[ 3651.539914] drxk: Error -22 on get_lock_status
[ 3652.553694] drxk: Error -22 on get_lock_status
[ 3653.565608] drxk: Error -22 on get_lock_status
[ 3654.577609] drxk: Error -22 on get_lock_status
[ 3655.589503] drxk: Error -22 on get_lock_status
[ 3656.601814] drxk: Error -22 on get_lock_status
[ 3657.613776] drxk: Error -22 on get_lock_status
[ 3658.625737] drxk: Error -22 on get_lock_status
[ 3659.637645] drxk: Error -22 on get_lock_status
[ 3660.649564] drxk: Error -22 on get_lock_status
[ 3661.662600] drxk: Error -22 on get_lock_status
[ 3662.674547] drxk: Error -22 on get_lock_status
[ 3663.686492] drxk: Error -22 on get_lock_status
[ 3664.698414] drxk: Error -22 on get_lock_status
[ 3665.710346] drxk: Error -22 on get_lock_status
[ 3666.722296] drxk: Error -22 on get_lock_status
[ 3667.734197] drxk: Error -22 on get_lock_status
[ 3668.746085] drxk: Error -22 on get_lock_status
[ 3669.757970] drxk: Error -22 on get_lock_status
[ 3670.769879] drxk: Error -22 on get_lock_status
[ 3671.781757] drxk: Error -22 on get_lock_status
[ 3672.793672] drxk: Error -22 on get_lock_status
[ 3673.805619] drxk: Error -22 on get_lock_status
[ 3674.817526] drxk: Error -22 on get_lock_status
[ 3675.829476] drxk: Error -22 on get_lock_status
[ 3676.841412] drxk: Error -22 on get_lock_status
[ 3677.853375] drxk: Error -22 on get_lock_status
[ 3678.865288] drxk: Error -22 on get_lock_status
[ 3679.877210] drxk: Error -22 on get_lock_status
[ 3680.889157] drxk: Error -22 on get_lock_status
[ 3681.901102] drxk: Error -22 on get_lock_status
[ 3682.912977] drxk: Error -22 on get_lock_status
[ 3683.924880] drxk: Error -22 on get_lock_status
[ 3684.936823] drxk: Error -22 on get_lock_status
[ 3685.948748] drxk: Error -22 on get_lock_status
[ 3686.960671] drxk: Error -22 on get_lock_status
[ 3687.972594] drxk: Error -22 on get_lock_status
[ 3688.984571] drxk: Error -22 on get_lock_status
[ 3689.996518] drxk: Error -22 on get_lock_status
[ 3691.008451] drxk: Error -22 on get_lock_status
[ 3692.020376] drxk: Error -22 on get_lock_status
[ 3693.033047] drxk: Error -22 on get_lock_status
[ 3694.044973] drxk: Error -22 on get_lock_status
[ 3695.056918] drxk: Error -22 on get_lock_status
[ 3696.068870] drxk: Error -22 on get_lock_status
[ 3697.080749] drxk: Error -22 on get_lock_status
[ 3698.092675] drxk: Error -22 on get_lock_status
[ 3699.104617] drxk: Error -22 on get_lock_status
[ 3700.116607] drxk: Error -22 on get_lock_status
[ 3701.128556] drxk: Error -22 on get_lock_status
[ 3702.141271] drxk: Error -22 on get_lock_status
[ 3703.153207] drxk: Error -22 on get_lock_status
[ 3704.165152] drxk: Error -22 on get_lock_status
[ 3705.177047] drxk: Error -22 on get_lock_status
[ 3706.188974] drxk: Error -22 on get_lock_status
[ 3707.200923] drxk: Error -22 on get_lock_status
[ 3708.212843] drxk: Error -22 on get_lock_status
[ 3709.224766] drxk: Error -22 on get_lock_status
[ 3710.238066] drxk: Error -22 on get_lock_status
[ 3711.250057] drxk: Error -22 on get_lock_status
[ 3712.263957] drxk: Error -22 on get_lock_status
[ 3713.275859] drxk: Error -22 on get_lock_status
[ 3714.287807] drxk: Error -22 on get_lock_status
[ 3715.299795] drxk: Error -22 on get_lock_status
[ 3716.311769] drxk: Error -22 on get_lock_status
[ 3717.323692] drxk: Error -22 on get_lock_status
[ 3718.335662] drxk: Error -22 on get_lock_status
** Model information
sys_vendor: MSI
product_name: MS-7823
product_version: 1.0
chassis_vendor: MSI
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: V2.8
board_vendor: MSI
board_name: Z87M-G43 (MS-7823)
board_version: 1.0
** Loaded modules:
rfcomm(E)
hmac(E)
drbg(E)
ansi_cprng(E)
ctr(E)
ccm(E)
fuse(E)
uinput(E)
binfmt_misc(E)
nfsd(E)
auth_rpcgss(E)
nfs_acl(E)
nfs(E)
lockd(E)
grace(E)
fscache(E)
sunrpc(E)
i2c_dev(E)
xpad(E)
nct6775(E)
hwmon_vid(E)
loop(E)
ir_lirc_codec(E)
lirc_dev(E)
rc_nec_terratec_cinergy_xs(E)
mt2063(E)
drxk(E)
iTCO_wdt(E)
iTCO_vendor_support(E)
ppdev(E)
intel_rapl(E)
x86_pkg_temp_thermal(E)
intel_powerclamp(E)
coretemp(E)
kvm_intel(E)
kvm(E)
irqbypass(E)
crct10dif_pclmul(E)
cx25840(E)
crc32_pclmul(E)
ghash_clmulni_intel(E)
serio_raw(E)
pcspkr(E)
arc4(E)
i2c_i801(E)
sg(E)
ath9k(E)
ath9k_common(E)
cx23885(E)
ath9k_hw(E)
altera_ci(E)
tda18271(E)
ath(E)
altera_stapl(E)
m88ds3103(E)
joydev(E)
i2c_mux(E)
tveeprom(E)
cx2341x(E)
mac80211(E)
videobuf2_dvb(E)
dvb_core(E)
snd_hda_codec_hdmi(E)
rc_core(E)
v4l2_common(E)
videobuf2_dma_sg(E)
videobuf2_memops(E)
videobuf2_v4l2(E)
videobuf2_core(E)
videodev(E)
media(E)
btusb(E)
btrtl(E)
btbcm(E)
btintel(E)
bluetooth(E)
snd_hda_codec_realtek(E)
cfg80211(E)
snd_hda_codec_generic(E)
lpc_ich(E)
mfd_core(E)
rfkill(E)
snd_hda_intel(E)
snd_hda_codec(E)
snd_hda_core(E)
snd_hwdep(E)
snd_pcm(E)
snd_timer(E)
snd(E)
mei_me(E)
soundcore(E)
mei(E)
shpchp(E)
parport_pc(E)
battery(E)
parport(E)
8250_fintek(E)
tpm_infineon(E)
evdev(E)
intel_smartconnect(E)
tpm_tis(E)
tpm(E)
processor(E)
ext4(E)
ecb(E)
crc16(E)
jbd2(E)
mbcache(E)
btrfs(E)
crc32c_generic(E)
xor(E)
raid6_pq(E)
hid_logitech(E)
ff_memless(E)
sd_mod(E)
sr_mod(E)
cdrom(E)
hid_generic(E)
usbhid(E)
hid(E)
crc32c_intel(E)
mxm_wmi(E)
aesni_intel(E)
aes_x86_64(E)
glue_helper(E)
lrw(E)
gf128mul(E)
ablk_helper(E)
cryptd(E)
psmouse(E)
ahci(E)
libahci(E)
libata(E)
scsi_mod(E)
ehci_pci(E)
ehci_hcd(E)
xhci_pci(E)
xhci_hcd(E)
r8169(E)
mii(E)
i915(E)
usbcore(E)
usb_common(E)
i2c_algo_bit(E)
drm_kms_helper(E)
drm(E)
fan(E)
thermal(E)
wmi(E)
video(E)
fjes(E)
button(E)
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
Subsystem: Micro-Star International Co., Ltd. [MSI] 4th Gen Core Processor DRAM Controller [1462:7823]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])
DeviceName: Onboard IGD
Subsystem: Micro-Star International Co., Ltd. [MSI] Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [1462:7823]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: Micro-Star International Co., Ltd. [MSI] Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [1462:7823]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at f7c14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB xHCI [1462:7823]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family MEI Controller [1462:7823]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f7c1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB EHCI [1462:7823]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset High Definition Audio Controller [1462:d823]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f7c10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: df200000-df3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8086:8c18] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7b00000-f7bfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.5 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #6 [8086:8c1a] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7a00000-f7afffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.6 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 [8086:8c1c] (rev d4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Memory behind bridge: f7800000-f79fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family USB EHCI [1462:7823]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7c1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1f.0 ISA bridge [0601]: Intel Corporation Z87 Express LPC Controller [8086:8c44] (rev 04)
Subsystem: Micro-Star International Co., Ltd. [MSI] Z87 Express LPC Controller [1462:7823]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [1462:7823]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 29
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7c1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
Kernel modules: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
Subsystem: Micro-Star International Co., Ltd. [MSI] 8 Series/C220 Series Chipset Family SMBus Controller [1462:7823]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7c19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
Kernel modules: i2c_i801
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: Micro-Star International Co., Ltd. [MSI] RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [1462:7823]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 27
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7b00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
Kernel modules: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros AR93xx Wireless Network Adapter [168c:0030] (rev 01)
Subsystem: Qualcomm Atheros AR93xx Wireless Network Adapter [168c:3116]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7a00000 (64-bit, non-prefetchable) [size=128K]
Expansion ROM at f7a20000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
04:00.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23885 PCI Video and Audio Decoder [14f1:8852] (rev 04)
Subsystem: TERRATEC Electronic GmbH Cinergy T PCIe Dual [153b:117e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: cx23885
Kernel modules: cx23885
** USB devices:
Bus 004 Device 002: ID 8087:8000 Intel Corp.
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 8087:8008 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser
Bus 001 Device 005: ID 2659:1210 Sundtek MediaTV Pro III (EU)
Bus 001 Device 004: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode)
Bus 001 Device 003: ID 1a34:0809 ACRUX
Bus 001 Device 002: ID 0079:1802 DragonRise Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing'), (500, 'stable'), (20, 'unstable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.utf8, LC_CTYPE=de_DE.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages linux-image-4.6.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 22-1.1
ii linux-base 4.4
Versions of packages linux-image-4.6.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.6.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-36
pn linux-doc-4.6 <none>
Versions of packages linux-image-4.6.0-1-amd64 is related to:
ii firmware-amd-graphics 20160110-1
ii firmware-atheros 20160110-1
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
ii firmware-intel-sound 20160110-1
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux-nonfree 20160110-1
ii firmware-misc-nonfree 20160110-1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20160110-1
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160307 (Debian 5.3.1-11) ) #1 SMP Debian 4.4.6-1 (2016-03-17)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-1-amd64 root=UUID=109fca5d-2cc6-4811-8e5d-4daa845c9384 ro quiet splash
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008a262fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a263000-0x000000008a269fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008a26a000-0x000000008a6acfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a6ad000-0x000000008ac3dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ac3e000-0x000000009cdadfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cdae000-0x000000009ce44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce45000-0x000000009ce96fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ce97000-0x000000009cfc7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfc8000-0x000000009dffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7823/Z87M-G43 (MS-7823), BIOS V2.8 07/20/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 009F000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x9f000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff8800000fd7e0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01d29000, 0x01d29fff] PGTABLE
[ 0.000000] BRK [0x01d2a000, 0x01d2afff] PGTABLE
[ 0.000000] BRK [0x01d2b000, 0x01d2bfff] PGTABLE
[ 0.000000] BRK [0x01d2c000, 0x01d2cfff] PGTABLE
[ 0.000000] BRK [0x01d2d000, 0x01d2dfff] PGTABLE
[ 0.000000] BRK [0x01d2e000, 0x01d2efff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34834000-0x36411fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009CF9B080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009CFA88A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000009CF9B1A0 00D703 (v02 ALASKA A M I 00000036 INTL 20120711)
[ 0.000000] ACPI: FACS 0x000000009CFC7F80 000040
[ 0.000000] ACPI: APIC 0x000000009CFA89B8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009CFA8A30 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x000000009CFA8A78 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x000000009CFA8B20 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000009CFA9060 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x000000009CFA9B38 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000009CFA9B78 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000009CFA9BB0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000009CFA9F20 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x000000009CFAD448 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000009CFAD500 000A26 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21fdf7000-0x21fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA32 [mem 0x0000000000001000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008a262fff]
[ 0.000000] node 0: [mem 0x000000008a26a000-0x000000008a6acfff]
[ 0.000000] node 0: [mem 0x000000008ac3e000-0x000000009cdadfff]
[ 0.000000] node 0: [mem 0x000000009ce45000-0x000000009ce96fff]
[ 0.000000] node 0: [mem 0x000000009dfff000-0x000000009dffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[ 0.000000] On node 0 totalpages: 1820165
[ 0.000000] DMA32 zone: 10017 pages used for memmap
[ 0.000000] DMA32 zone: 21 pages reserved
[ 0.000000] DMA32 zone: 641029 pages, LIFO batch:31
[ 0.000000] Normal zone: 18424 pages used for memmap
[ 0.000000] Normal zone: 1179136 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9f200000-0xc11fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a263000-0x8a269fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a6ad000-0x8ac3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cdae000-0x9ce44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ce97000-0x9cfc7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfc8000-0x9dffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9effffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88021fa00000 s92888 r8192 d29992 u524288
[ 0.000000] pcpu-alloc: s92888 r8192 d29992 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1791703
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.4.0-1-amd64 root=UUID=109fca5d-2cc6-4811-8e5d-4daa845c9384 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7057096K/7280660K available (5709K kernel code, 1065K rwdata, 2848K rodata, 1304K init, 828K bss, 223564K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2900.152 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 5800.30 BogoMIPS (lpj=11600608)
[ 0.000024] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20150930
[ 0.009558] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.009577] Security Framework initialized
[ 0.009579] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009584] AppArmor: AppArmor disabled by boot time parameter
[ 0.009958] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011546] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012283] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012290] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012485] Initializing cgroup subsys io
[ 0.012487] Initializing cgroup subsys memory
[ 0.012556] Disabling memory control group subsystem
[ 0.012557] Initializing cgroup subsys devices
[ 0.012559] Initializing cgroup subsys freezer
[ 0.012561] Initializing cgroup subsys net_cls
[ 0.012563] Initializing cgroup subsys perf_event
[ 0.012565] Initializing cgroup subsys net_prio
[ 0.012566] Initializing cgroup subsys pids
[ 0.012585] CPU: Physical Processor ID: 0
[ 0.012586] CPU: Processor Core ID: 0
[ 0.013390] mce: CPU supports 7 MCE banks
[ 0.013400] CPU0: Thermal monitoring enabled (TM1)
[ 0.013407] process: using mwait in idle threads
[ 0.013409] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.013410] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.013661] Freeing SMP alternatives memory: 24K (ffffffff81c52000 - ffffffff81c58000)
[ 0.024382] ftrace: allocating 23690 entries in 93 pages
[ 0.031556] DMAR: Host address width 39
[ 0.031558] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.031565] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.031566] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.031569] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.031570] DMAR: RMRR base: 0x0000009dea3000 end: 0x0000009deb1fff
[ 0.031571] DMAR: RMRR base: 0x000000df000000 end: 0x000000df1fffff
[ 0.031573] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.031574] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.031574] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.031835] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.031836] x2apic enabled
[ 0.031841] Switched APIC routing to cluster x2apic.
[ 0.032249] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.071937] TSC deadline timer enabled
[ 0.071939] smpboot: CPU0: Intel(R) Core(TM) i5-4570T CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.071966] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.071982] ... version: 3
[ 0.071982] ... bit width: 48
[ 0.071983] ... generic registers: 4
[ 0.071984] ... value mask: 0000ffffffffffff
[ 0.071984] ... max period: 0000ffffffffffff
[ 0.071985] ... fixed-purpose events: 3
[ 0.071985] ... event mask: 000000070000000f
[ 0.072386] x86: Booting SMP configuration:
[ 0.072388] .... node #0, CPUs: #1
[ 0.073637] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.076569] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076631] #2 #3
[ 0.083057] x86: Booted up 1 node, 4 CPUs
[ 0.083059] smpboot: Total of 4 processors activated (23201.21 BogoMIPS)
[ 0.086347] devtmpfs: initialized
[ 0.088116] PM: Registering ACPI NVS region [mem 0x8a263000-0x8a269fff] (28672 bytes)
[ 0.088118] PM: Registering ACPI NVS region [mem 0x9ce97000-0x9cfc7fff] (1249280 bytes)
[ 0.088201] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.088255] pinctrl core: initialized pinctrl subsystem
[ 0.088360] NET: Registered protocol family 16
[ 0.098225] cpuidle: using governor ladder
[ 0.110222] cpuidle: using governor menu
[ 0.110273] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.110274] ACPI: bus type PCI registered
[ 0.110276] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.110338] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.110340] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.110345] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.110401] PCI: Using configuration type 1 for base access
[ 0.110580] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.122466] ACPI: Added _OSI(Module Device)
[ 0.122468] ACPI: Added _OSI(Processor Device)
[ 0.122469] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.122469] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.125175] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.127272] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.127911] ACPI: Dynamic OEM Table Load:
[ 0.127915] ACPI: SSDT 0xFFFF880216FD5400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.128392] ACPI: Dynamic OEM Table Load:
[ 0.128395] ACPI: SSDT 0xFFFF88021809B800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.128912] ACPI: Dynamic OEM Table Load:
[ 0.128915] ACPI: SSDT 0xFFFF880216F9BA00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.129750] ACPI: Interpreter enabled
[ 0.129755] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 0.129759] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 0.129772] ACPI: (supports S0 S3 S4 S5)
[ 0.129773] ACPI: Using IOAPIC for interrupt routing
[ 0.129793] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.136785] ACPI: Power Resource [FN00] (off)
[ 0.136846] ACPI: Power Resource [FN01] (off)
[ 0.136906] ACPI: Power Resource [FN02] (off)
[ 0.136964] ACPI: Power Resource [FN03] (off)
[ 0.137024] ACPI: Power Resource [FN04] (off)
[ 0.137605] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.137609] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.137793] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.137897] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.137898] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.138199] PCI host bridge to bus 0000:00
[ 0.138201] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.138203] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.138204] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.138205] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.138206] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.138207] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.138208] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.138209] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.138210] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.138211] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.138213] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.138218] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.138289] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.138300] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.138305] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.138308] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.138371] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.138380] pci 0000:00:03.0: reg 0x10: [mem 0xf7c14000-0xf7c17fff 64bit]
[ 0.138465] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.138488] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.138533] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.138564] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.138594] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.138617] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1e000-0xf7c1e00f 64bit]
[ 0.138665] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.138730] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.138755] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c1c000-0xf7c1c3ff]
[ 0.138821] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.138864] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.138895] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.138918] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[ 0.138970] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.139003] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.139032] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.139098] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.139159] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.139192] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.139248] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.139304] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.139334] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.139389] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.139445] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.139475] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.139530] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.139586] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.139618] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.139644] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b3ff]
[ 0.139709] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.139752] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.139783] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.139926] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.139945] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.139951] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.139957] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.139963] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.139970] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.139976] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c1a000-0xf7c1a7ff]
[ 0.140000] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.140054] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.140068] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c19000-0xf7c190ff 64bit]
[ 0.140086] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.140204] acpiphp: Slot [1] registered
[ 0.140209] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.140275] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.140313] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.140340] pci 0000:02:00.0: reg 0x18: [mem 0xf7b00000-0xf7b00fff 64bit]
[ 0.140357] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.140426] pci 0000:02:00.0: supports D1 D2
[ 0.140427] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.140464] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.147081] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.147084] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.147088] pci 0000:00:1c.4: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.147092] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.147156] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
[ 0.147195] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff 64bit]
[ 0.147245] pci 0000:03:00.0: reg 0x30: [mem 0xf7a20000-0xf7a2ffff pref]
[ 0.147295] pci 0000:03:00.0: supports D1
[ 0.147296] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.147327] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.155080] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.155085] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.155150] pci 0000:04:00.0: [14f1:8852] type 00 class 0x040000
[ 0.155206] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf79fffff 64bit]
[ 0.155331] pci 0000:04:00.0: supports D1 D2
[ 0.155332] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.155368] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.163083] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.163088] pci 0000:00:1c.6: bridge window [mem 0xf7800000-0xf79fffff]
[ 0.163715] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.163753] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.163790] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.163827] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.163863] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.163900] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.163936] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.163973] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.164226] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.164301] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.164303] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.164305] vgaarb: loaded
[ 0.164306] vgaarb: bridge control possible 0000:00:02.0
[ 0.164372] PCI: Using ACPI for IRQ routing
[ 0.165611] PCI: pci_cache_line_size set to 64 bytes
[ 0.165658] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.165659] e820: reserve RAM buffer [mem 0x8a263000-0x8bffffff]
[ 0.165660] e820: reserve RAM buffer [mem 0x8a6ad000-0x8bffffff]
[ 0.165661] e820: reserve RAM buffer [mem 0x9cdae000-0x9fffffff]
[ 0.165662] e820: reserve RAM buffer [mem 0x9ce97000-0x9fffffff]
[ 0.165663] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[ 0.165664] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.165770] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.165774] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.167795] clocksource: Switched to clocksource hpet
[ 0.171947] pnp: PnP ACPI init
[ 0.172012] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.172015] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.172152] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.172153] system 00:01: [io 0xffff] has been reserved
[ 0.172155] system 00:01: [io 0xffff] has been reserved
[ 0.172156] system 00:01: [io 0xffff] has been reserved
[ 0.172158] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.172159] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.172160] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.172161] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.172163] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.172164] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.172166] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172184] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.172220] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.172222] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.172302] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.172303] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.172305] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.172416] pnp 00:05: [dma 0 disabled]
[ 0.172449] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.172621] pnp 00:06: [dma 0 disabled]
[ 0.172688] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.172724] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.172726] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173051] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.173053] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.173054] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.173055] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.173057] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.173058] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.173060] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.173061] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.173062] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.173064] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.173065] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.173066] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.173068] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173235] pnp: PnP ACPI: found 9 devices
[ 0.179149] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.179163] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.179165] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.179166] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.179186] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.179187] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.179188] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.179190] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.179191] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.179192] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.179196] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[ 0.179201] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.179203] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.179205] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.179208] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.179212] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff]
[ 0.179215] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.179221] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.179223] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.179227] pci 0000:00:1c.4: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.179230] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.179235] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.179238] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.179244] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.179248] pci 0000:00:1c.6: bridge window [mem 0xf7800000-0xf79fffff]
[ 0.179255] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.179257] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.179258] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.179259] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.179260] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.179261] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.179262] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.179263] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.179264] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.179265] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.179266] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.179267] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
[ 0.179268] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.179269] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.179270] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.179271] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.179273] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.179274] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf79fffff]
[ 0.179320] NET: Registered protocol family 2
[ 0.179461] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.179590] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.179762] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.179784] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.179820] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.179890] NET: Registered protocol family 1
[ 0.179901] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.179995] PCI: CLS 64 bytes, default 64
[ 0.180033] Unpacking initramfs...
[ 0.559104] Freeing initrd memory: 28536K (ffff880034834000 - ffff880036412000)
[ 0.559125] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.559126] software IO TLB [mem 0x98dae000-0x9cdae000] (64MB) mapped at [ffff880098dae000-ffff88009cdadfff]
[ 0.559179] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.559181] hw unit of domain pp0-core 2^-14 Joules
[ 0.559181] hw unit of domain package 2^-14 Joules
[ 0.559182] hw unit of domain dram 2^-14 Joules
[ 0.559182] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.559505] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.559537] audit: initializing netlink subsys (disabled)
[ 0.559551] audit: type=2000 audit(1471075171.552:1): initialized
[ 0.559977] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.559991] zbud: loaded
[ 0.560097] VFS: Disk quotas dquot_6.6.0
[ 0.560111] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.560481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.560511] io scheduler noop registered
[ 0.560514] io scheduler deadline registered
[ 0.560524] io scheduler cfq registered (default)
[ 0.560918] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.560923] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.560939] intel_idle: MWAIT substates: 0x42120
[ 0.560940] intel_idle: v0.4 model 0x3C
[ 0.560940] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.561097] GHES: HEST is not enabled!
[ 0.561156] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.581526] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.581906] Linux agpgart interface v0.103
[ 0.581943] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.581944] AMD IOMMUv2 functionality not available on this system
[ 0.582219] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.584677] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.584680] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.584805] mousedev: PS/2 mouse device common for all mice
[ 0.584839] rtc_cmos 00:02: RTC can wake from S4
[ 0.584965] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.584989] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.584998] Intel P-state driver initializing.
[ 0.585146] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.586437] NET: Registered protocol family 10
[ 0.586840] mip6: Mobile IPv6
[ 0.586850] NET: Registered protocol family 17
[ 0.586866] mpls_gso: MPLS GSO support
[ 0.587333] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.587358] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.587379] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.587391] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.587475] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.587837] registered taskstats version 1
[ 0.587908] zswap: loaded using pool lzo/zbud
[ 0.589139] rtc_cmos 00:02: setting system clock to 2016-08-13 07:59:31 UTC (1471075171)
[ 0.589348] PM: Hibernation image not present or could not be loaded.
[ 0.591859] Freeing unused kernel memory: 1304K (ffffffff81b0c000 - ffffffff81c52000)
[ 0.591860] Write protecting the kernel read-only data: 10240k
[ 0.592005] Freeing unused kernel memory: 424K (ffff880001596000 - ffff880001600000)
[ 0.593885] Freeing unused kernel memory: 1248K (ffff8800018c8000 - ffff880001a00000)
[ 0.598272] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.604341] random: udevadm urandom read with 2 bits of entropy available
[ 0.614836] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.614841] ACPI: Power Button [PWRB]
[ 0.614899] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.614902] ACPI: Power Button [PWRF]
[ 0.614931] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.616906] wmi: Mapper loaded
[ 0.621965] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.621970] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.622203] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.622205] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.623565] ACPI: bus type USB registered
[ 0.623590] usbcore: registered new interface driver usbfs
[ 0.623600] usbcore: registered new interface driver hub
[ 0.623615] usbcore: registered new device driver usb
[ 0.623662] [drm] Initialized drm 1.1.0 20060810
[ 0.624129] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.624304] ehci-pci: EHCI PCI platform driver
[ 0.624431] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.624437] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.624447] ehci-pci 0000:00:1a.0: debug port 2
[ 0.624968] SCSI subsystem initialized
[ 0.628360] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.628709] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c1c000
[ 0.628906] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.628916] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.636559] libata version 3.00 loaded.
[ 0.636774] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000e66000, d4:3d:7e:db:21:9e, XID 0c000800 IRQ 26
[ 0.636776] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.639791] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.639823] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.639824] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.639825] usb usb1: Product: EHCI Host Controller
[ 0.639826] usb usb1: Manufacturer: Linux 4.4.0-1-amd64 ehci_hcd
[ 0.639827] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.639918] hub 1-0:1.0: USB hub found
[ 0.639922] hub 1-0:1.0: 2 ports detected
[ 0.640105] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.640109] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.640119] ehci-pci 0000:00:1d.0: debug port 2
[ 0.644011] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.644106] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c1b000
[ 0.655814] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.655839] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.655841] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.655851] usb usb2: Product: EHCI Host Controller
[ 0.655852] usb usb2: Manufacturer: Linux 4.4.0-1-amd64 ehci_hcd
[ 0.655852] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.656015] hub 2-0:1.0: USB hub found
[ 0.656019] hub 2-0:1.0: 2 ports detected
[ 0.656566] [drm] Memory usable by graphics device = 2048M
[ 0.656568] [drm] Replacing VGA console driver
[ 0.657104] Console: switching to colour dummy device 80x25
[ 0.663508] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.663510] [drm] Driver supports precise vblank timestamp query.
[ 0.663739] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.737170] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.737562] acpi device:60: registered as cooling_device5
[ 0.737633] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[ 0.737671] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 0.737776] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.737781] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.738851] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.738856] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.739010] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.739012] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.739013] usb usb3: Product: xHCI Host Controller
[ 0.739014] usb usb3: Manufacturer: Linux 4.4.0-1-amd64 xhci-hcd
[ 0.739015] usb usb3: SerialNumber: 0000:00:14.0
[ 0.739124] hub 3-0:1.0: USB hub found
[ 0.739144] hub 3-0:1.0: 14 ports detected
[ 0.742780] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.742784] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.742821] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.742823] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.742825] usb usb4: Product: xHCI Host Controller
[ 0.742826] usb usb4: Manufacturer: Linux 4.4.0-1-amd64 xhci-hcd
[ 0.742828] usb usb4: SerialNumber: 0000:00:14.0
[ 0.742960] hub 4-0:1.0: USB hub found
[ 0.742973] hub 4-0:1.0: 6 ports detected
[ 0.744170] ahci 0000:00:1f.2: version 3.0
[ 0.744301] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
[ 0.744304] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.772437] scsi host0: ahci
[ 0.772597] scsi host1: ahci
[ 0.772752] scsi host2: ahci
[ 0.772865] scsi host3: ahci
[ 0.772949] scsi host4: ahci
[ 0.773028] scsi host5: ahci
[ 0.773061] ata1: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a100 irq 29
[ 0.773063] ata2: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a180 irq 29
[ 0.773065] ata3: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a200 irq 29
[ 0.773067] ata4: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a280 irq 29
[ 0.773068] ata5: DUMMY
[ 0.773068] ata6: DUMMY
[ 0.951791] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.967790] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.032241] fbcon: inteldrmfb (fb0) is primary device
[ 1.051799] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 1.084130] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.084131] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.084401] hub 1-1:1.0: USB hub found
[ 1.084476] hub 1-1:1.0: 6 ports detected
[ 1.091795] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.091811] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.091823] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.091845] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.092396] ata4.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133
[ 1.092397] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.092524] ata2.00: ATA-9: WDC WD60EZRZ-00GZ5B1, 80.00A80, max UDMA/133
[ 1.092525] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.093002] ata4.00: configured for UDMA/133
[ 1.093285] ata2.00: configured for UDMA/133
[ 1.093782] ata1.00: READ LOG DMA EXT failed, trying unqueued
[ 1.093800] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.093801] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0AB0Q, max UDMA/133
[ 1.093801] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.093990] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.093991] ata1.00: configured for UDMA/133
[ 1.094607] ata3.00: ATAPI: HL-DT-ST BD-RE BH16NS40, 1.01, max UDMA/100
[ 1.095349] ata3.00: configured for UDMA/100
[ 1.100161] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.100162] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.100467] hub 2-1:1.0: USB hub found
[ 1.100648] hub 2-1:1.0: 8 ports detected
[ 1.183710] usb 3-1: New USB device found, idVendor=0079, idProduct=1802
[ 1.183711] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.183712] usb 3-1: Product: Mayflash Wiimote PC Adapter
[ 1.183712] usb 3-1: Manufacturer: HJZ
[ 1.185046] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.188392] usbcore: registered new interface driver usbhid
[ 1.188392] usbhid: USB HID core driver
[ 1.188820] input: HJZ Mayflash Wiimote PC Adapter as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0079:1802.0001/input/input6
[ 1.243884] hid-generic 0003:0079:1802.0001: input,hidraw0: USB HID v10.01 Keyboard [HJZ Mayflash Wiimote PC Adapter] on usb-0000:00:14.0-1/input0
[ 1.244728] input: HJZ Mayflash Wiimote PC Adapter as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:0079:1802.0002/input/input7
[ 1.295774] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[ 1.299878] hid-generic 0003:0079:1802.0002: input,hidraw1: USB HID v10.01 Mouse [HJZ Mayflash Wiimote PC Adapter] on usb-0000:00:14.0-1/input1
[ 1.347801] Console: switching to colour frame buffer device 240x67
[ 1.350715] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.359975] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 AB0Q PQ: 0 ANSI: 5
[ 1.360300] scsi 1:0:0:0: Direct-Access ATA WDC WD60EZRZ-00G 0A80 PQ: 0 ANSI: 5
[ 1.363046] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH16NS40 1.01 PQ: 0 ANSI: 5
[ 1.370259] scsi 3:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5
[ 1.372411] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.372421] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
[ 1.372423] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.372459] sd 0:0:0:0: [sda] Write Protect is off
[ 1.372460] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.372461] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.372463] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.372477] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.372479] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.372591] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.372593] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 1.372626] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.372628] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.372650] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.375441] sda: sda1 sda2 sda3
[ 1.375687] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.382271] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.382273] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.382345] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.520739] usb 3-2: New USB device found, idVendor=1a34, idProduct=0809
[ 1.520741] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.520742] usb 3-2: Product: SL-6566
[ 1.520902] usb 3-2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.520905] usb 3-2: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.555765] tsc: Refined TSC clocksource calibration: 2899.997 MHz
[ 1.555767] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29cd4058c5c, max_idle_ns: 440795330155 ns
[ 1.640893] input: SL-6566 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1A34:0809.0003/input/input8
[ 1.640978] hid-generic 0003:1A34:0809.0003: input,hidraw2: USB HID v1.10 Joystick [SL-6566] on usb-0000:00:14.0-2/input0
[ 1.807750] usb 3-3: new full-speed USB device number 4 using xhci_hcd
[ 1.861933] sdb: sdb1
[ 1.862242] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.055102] usb 3-3: New USB device found, idVendor=0a12, idProduct=0001
[ 2.055114] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.106889] sdc: sdc1
[ 2.107210] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.167731] usb 3-4: new high-speed USB device number 5 using xhci_hcd
[ 2.298592] usb 3-4: New USB device found, idVendor=2659, idProduct=1210
[ 2.298594] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.298595] usb 3-4: Product: MediaTV Pro III (EU)
[ 2.298596] usb 3-4: Manufacturer: Sundtek
[ 2.298597] usb 3-4: SerialNumber: U140218173634
[ 2.419746] usb 3-5: new low-speed USB device number 6 using xhci_hcd
[ 2.553221] usb 3-5: New USB device found, idVendor=046d, idProduct=c517
[ 2.553234] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.553235] usb 3-5: Product: USB Receiver
[ 2.553236] usb 3-5: Manufacturer: Logitech
[ 2.553402] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.553405] usb 3-5: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.555910] clocksource: Switched to clocksource tsc
[ 2.561595] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C517.0004/input/input9
[ 2.615871] logitech 0003:046D:C517.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[ 2.615898] logitech 0003:046D:C517.0005: fixing up Logitech keyboard report descriptor
[ 2.616247] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C517.0005/input/input10
[ 2.671823] logitech 0003:046D:C517.0005: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[ 2.687675] raid6: sse2x1 gen() 10894 MB/s
[ 2.755672] raid6: sse2x1 xor() 8462 MB/s
[ 2.823669] raid6: sse2x2 gen() 14213 MB/s
[ 2.891652] raid6: sse2x2 xor() 9552 MB/s
[ 2.959646] raid6: sse2x4 gen() 16401 MB/s
[ 3.027644] raid6: sse2x4 xor() 11533 MB/s
[ 3.095641] raid6: avx2x1 gen() 21811 MB/s
[ 3.163649] raid6: avx2x2 gen() 25281 MB/s
[ 3.231645] raid6: avx2x4 gen() 29174 MB/s
[ 3.231646] raid6: using algorithm avx2x4 gen() 29174 MB/s
[ 3.231646] raid6: using avx2x2 recovery algorithm
[ 3.231831] xor: automatically using best checksumming function:
[ 3.271629] avx : 36394.000 MB/sec
[ 3.274117] Btrfs loaded
[ 3.323620] PM: Starting manual resume from disk
[ 3.323622] PM: Hibernation image partition 8:3 present
[ 3.323623] PM: Looking for hibernation image.
[ 3.323714] PM: Image not found (code -22)
[ 3.323715] PM: Hibernation image not present or could not be loaded.
[ 3.344570] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.609495] parport_pc 00:06: reported by Plug and Play ACPI
[ 3.609560] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 3.617463] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.636667] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.636671] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.636673] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.636674] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.636676] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 3.636677] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.636679] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.636680] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.636682] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.643774] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 3.643835] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 3.643887] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 3.650149] random: nonblocking pool is initialized
[ 3.657559] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 3.657730] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 3.657796] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 3.657850] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 3.657933] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 3.658230] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 3.658651] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.659145] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 3.659208] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[ 3.672810] media: Linux media interface: v0.10
[ 3.676038] Linux video capture interface: v2.00
[ 3.703103] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.703245] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.703334] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 3.703897] Bluetooth: Core ver 2.21
[ 3.703909] NET: Registered protocol family 31
[ 3.703910] Bluetooth: HCI device and connection manager initialized
[ 3.703913] Bluetooth: HCI socket layer initialized
[ 3.703917] Bluetooth: L2CAP socket layer initialized
[ 3.703925] Bluetooth: SCO socket layer initialized
[ 3.704517] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.707882] usbcore: registered new interface driver btusb
[ 3.729897] cx23885 driver version 0.0.4 loaded
[ 3.730003] CORE cx23885[0]: subsystem: 153b:117e, board: TerraTec Cinergy T PCIe Dual [card=34,autodetected]
[ 3.781036] ath: EEPROM regdomain: 0x21
[ 3.781038] ath: EEPROM indicates we should expect a direct regpair map
[ 3.781040] ath: Country alpha2 being used: AU
[ 3.781041] ath: Regpair used: 0x21
[ 3.785794] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
[ 3.785800] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.799837] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.800041] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90001240000, irq=17
[ 3.808641] input: PC Speaker as /devices/platform/pcspkr/input/input22
[ 3.828292] AVX2 version of gcm_enc/dec engaged.
[ 3.828295] AES CTR mode by8 optimization enabled
[ 3.865449] cx25840 9-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[ 3.884268] cx25840 9-0044: firmware: direct-loading firmware v4l-cx23885-avcore-01.fw
[ 3.996300] ppdev: user-space parallel port driver
[ 4.008858] intel_rapl: Found RAPL domain package
[ 4.008861] intel_rapl: Found RAPL domain core
[ 4.008862] intel_rapl: Found RAPL domain uncore
[ 4.008863] intel_rapl: Found RAPL domain dram
[ 4.124167] cfg80211: World regulatory domain updated:
[ 4.124171] cfg80211: DFS Master region: unset
[ 4.124172] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.124173] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.124175] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.124176] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.124178] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.124179] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.124181] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.124182] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.124183] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.192083] iTCO_vendor_support: vendor-support=0
[ 4.193089] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.193123] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 4.193206] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.227235] cfg80211: Regulatory domain changed to country: AU
[ 4.227238] cfg80211: DFS Master region: ETSI
[ 4.227239] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.227240] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.227242] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 1700 mBm), (N/A)
[ 4.227243] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2400 mBm), (0 s)
[ 4.227244] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2400 mBm), (0 s)
[ 4.227244] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 4.517182] cx25840 9-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[ 4.533620] cx23885_dvb_register() allocating 1 frontend(s)
[ 4.533622] cx23885[0]: cx23885 based dvb card
[ 4.533623] cx23885[0]: frontend initialization failed
[ 4.533638] cx23885_dvb_register() dvb_register failed err = -22
[ 4.533653] cx23885_dev_setup() Failed to register dvb adapters on VID_B
[ 4.533670] cx23885_dvb_register() allocating 1 frontend(s)
[ 4.533671] cx23885[0]: cx23885 based dvb card
[ 4.533671] cx23885[0]: frontend initialization failed
[ 4.533684] cx23885_dvb_register() dvb_register failed err = -22
[ 4.533699] cx23885_dev_setup() Failed to register dvb on VID_C
[ 4.533716] cx23885_dev_checkrevision() Hardware revision = 0xa5
[ 4.533719] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 18, latency: 0, mmio: 0xf7800000
[ 4.559594] Registered IR keymap rc-nec-terratec-cinergy-xs
[ 4.559676] input: cx23885 IR (TerraTec Cinergy T PCIe Dual) as /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0/input23
[ 4.563300] rc0: cx23885 IR (TerraTec Cinergy T PCIe Dual) as /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0
[ 4.564118] IR NEC protocol handler initialized
[ 4.564534] IR RC5(x/sz) protocol handler initialized
[ 4.564846] IR RC6 protocol handler initialized
[ 4.565874] IR SANYO protocol handler initialized
[ 4.566073] IR JVC protocol handler initialized
[ 4.566185] IR Sony protocol handler initialized
[ 4.567126] IR Sharp protocol handler initialized
[ 4.567305] IR MCE Keyboard/mouse protocol handler initialized
[ 4.568337] input: MCE IR Keyboard/Mouse (cx23885) as /devices/virtual/input/input24
[ 4.568517] lirc_dev: IR Remote Control driver registered, major 247
[ 4.569329] IR XMP protocol handler initialized
[ 4.569521] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0
[ 4.569523] IR LIRC bridge handler initialized
[ 6.011220] Adding 3871740k swap on /dev/sda3. Priority:-1 extents:1 across:3871740k SSFS
[ 6.023415] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 6.291666] loop: module loaded
[ 6.339592] nct6775: Found NCT6779D or compatible chip at 0x4e:0xa00
[ 6.355893] usbcore: registered new interface driver xpad
[ 6.370708] i2c /dev entries driver
[ 6.401689] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.575991] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.787582] RPC: Registered named UNIX socket transport module.
[ 6.787584] RPC: Registered udp transport module.
[ 6.787585] RPC: Registered tcp transport module.
[ 6.787586] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.790333] FS-Cache: Loaded
[ 6.795235] FS-Cache: Netfs 'nfs' registered for caching
[ 6.800330] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.251966] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.258419] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.260999] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.262416] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 8.301928] r8169 0000:02:00.0 eth0: link down
[ 8.301987] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.317180] systemd-logind[4103]: New seat seat0.
[ 8.317745] systemd-logind[4103]: Watching system buttons on /dev/input/event1 (Power Button)
[ 8.317808] systemd-logind[4103]: Watching system buttons on /dev/input/event2 (Video Bus)
[ 8.317856] systemd-logind[4103]: Watching system buttons on /dev/input/event0 (Power Button)
[ 8.371682] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.499299] systemd-logind[4103]: Failed to start user service, ignoring: Unknown unit: user@1000.service
[ 8.516178] systemd-logind[4103]: New session 1 of user htpc.
[ 9.488375] fuse init (API version 7.23)
[ 9.527567] input: Sundtek Remote Control as /devices/virtual/input/input25
[ 11.252152] wlan0: authenticate with 38:10:d5:7b:d9:69
[ 11.258115] wlan0: send auth to 38:10:d5:7b:d9:69 (try 1/3)
[ 11.261040] wlan0: authenticated
[ 11.263208] wlan0: associate with 38:10:d5:7b:d9:69 (try 1/3)
[ 11.269792] wlan0: RX AssocResp from 38:10:d5:7b:d9:69 (capab=0x431 status=0 aid=3)
[ 11.269864] wlan0: associated
[ 11.269871] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 11.272355] cfg80211: Regulatory domain changed to country: DE
[ 11.272358] cfg80211: DFS Master region: ETSI
[ 11.272359] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.272360] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.272361] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.272362] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 11.272363] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s)
[ 11.272364] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[ 15.361711] Bluetooth: RFCOMM TTY layer initialized
[ 15.361718] Bluetooth: RFCOMM socket layer initialized
[ 15.361723] Bluetooth: RFCOMM ver 1.11
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.000000] Linux version 4.5.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160528 (Debian 5.3.1-21) ) #1 SMP Debian 4.5.5-1 (2016-05-29)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-2-amd64 root=UUID=109fca5d-2cc6-4811-8e5d-4daa845c9384 ro quiet splash
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008a262fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a263000-0x000000008a269fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008a26a000-0x000000008a6acfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a6ad000-0x000000008ac3dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ac3e000-0x000000009cdadfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cdae000-0x000000009ce44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce45000-0x000000009ce96fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ce97000-0x000000009cfc7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfc8000-0x000000009dffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7823/Z87M-G43 (MS-7823), BIOS V2.8 07/20/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 009F000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x9f000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff8800000fd7e0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01d33000, 0x01d33fff] PGTABLE
[ 0.000000] BRK [0x01d34000, 0x01d34fff] PGTABLE
[ 0.000000] BRK [0x01d35000, 0x01d35fff] PGTABLE
[ 0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE
[ 0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE
[ 0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34774000-0x363b1fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009CF9B080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009CFA88A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000009CF9B1A0 00D703 (v02 ALASKA A M I 00000036 INTL 20120711)
[ 0.000000] ACPI: FACS 0x000000009CFC7F80 000040
[ 0.000000] ACPI: APIC 0x000000009CFA89B8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009CFA8A30 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x000000009CFA8A78 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x000000009CFA8B20 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000009CFA9060 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x000000009CFA9B38 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000009CFA9B78 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000009CFA9BB0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000009CFA9F20 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x000000009CFAD448 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000009CFAD500 000A26 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21fdf6000-0x21fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008a262fff]
[ 0.000000] node 0: [mem 0x000000008a26a000-0x000000008a6acfff]
[ 0.000000] node 0: [mem 0x000000008ac3e000-0x000000009cdadfff]
[ 0.000000] node 0: [mem 0x000000009ce45000-0x000000009ce96fff]
[ 0.000000] node 0: [mem 0x000000009dfff000-0x000000009dffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[ 0.000000] On node 0 totalpages: 1820165
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9954 pages used for memmap
[ 0.000000] DMA32 zone: 637033 pages, LIFO batch:31
[ 0.000000] Normal zone: 18424 pages used for memmap
[ 0.000000] Normal zone: 1179136 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9f200000-0xc11fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a263000-0x8a269fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a6ad000-0x8ac3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cdae000-0x9ce44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ce97000-0x9cfc7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfc8000-0x9dffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9effffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88021fa00000 s93144 r8192 d29736 u524288
[ 0.000000] pcpu-alloc: s93144 r8192 d29736 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1791702
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-2-amd64 root=UUID=109fca5d-2cc6-4811-8e5d-4daa845c9384 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7056572K/7280660K available (5877K kernel code, 1099K rwdata, 2932K rodata, 1316K init, 824K bss, 224088K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2900.054 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 5800.10 BogoMIPS (lpj=11600216)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000033] ACPI: Core revision 20160108
[ 0.009480] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.009509] Security Framework initialized
[ 0.009510] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009516] AppArmor: AppArmor disabled by boot time parameter
[ 0.009899] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011495] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012237] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012244] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012508] Disabling memory control group subsystem
[ 0.012531] CPU: Physical Processor ID: 0
[ 0.012532] CPU: Processor Core ID: 0
[ 0.012537] mce: CPU supports 7 MCE banks
[ 0.012546] CPU0: Thermal monitoring enabled (TM1)
[ 0.012553] process: using mwait in idle threads
[ 0.012555] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.012556] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.012807] Freeing SMP alternatives memory: 24K (ffffffff81c5d000 - ffffffff81c63000)
[ 0.024420] ftrace: allocating 24061 entries in 94 pages
[ 0.031732] DMAR: Host address width 39
[ 0.031734] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.031742] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.031743] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.031746] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.031747] DMAR: RMRR base: 0x0000009dea3000 end: 0x0000009deb1fff
[ 0.031748] DMAR: RMRR base: 0x000000df000000 end: 0x000000df1fffff
[ 0.031749] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.031750] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.031751] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.032007] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.032009] x2apic enabled
[ 0.032014] Switched APIC routing to cluster x2apic.
[ 0.032422] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.072109] TSC deadline timer enabled
[ 0.072112] smpboot: CPU0: Intel(R) Core(TM) i5-4570T CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.072134] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.072150] ... version: 3
[ 0.072151] ... bit width: 48
[ 0.072152] ... generic registers: 4
[ 0.072152] ... value mask: 0000ffffffffffff
[ 0.072153] ... max period: 0000ffffffffffff
[ 0.072153] ... fixed-purpose events: 3
[ 0.072154] ... event mask: 000000070000000f
[ 0.072577] x86: Booting SMP configuration:
[ 0.072578] .... node #0, CPUs: #1
[ 0.073826] microcode: CPU1 microcode updated early to revision 0x1e, date = 2015-08-13
[ 0.075932] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.076000] #2 #3
[ 0.080789] x86: Booted up 1 node, 4 CPUs
[ 0.080791] smpboot: Total of 4 processors activated (23200.43 BogoMIPS)
[ 0.084240] devtmpfs: initialized
[ 0.086016] PM: Registering ACPI NVS region [mem 0x8a263000-0x8a269fff] (28672 bytes)
[ 0.086018] PM: Registering ACPI NVS region [mem 0x9ce97000-0x9cfc7fff] (1249280 bytes)
[ 0.086095] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.086148] pinctrl core: initialized pinctrl subsystem
[ 0.086252] NET: Registered protocol family 16
[ 0.096782] cpuidle: using governor ladder
[ 0.108110] cpuidle: using governor menu
[ 0.108152] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.108153] ACPI: bus type PCI registered
[ 0.108154] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.108209] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.108210] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.108216] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.108269] PCI: Using configuration type 1 for base access
[ 0.108443] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.120855] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.120856] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.121052] ACPI: Added _OSI(Module Device)
[ 0.121053] ACPI: Added _OSI(Processor Device)
[ 0.121054] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.121055] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.122761] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.125018] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.125646] ACPI: Dynamic OEM Table Load:
[ 0.125650] ACPI: SSDT 0xFFFF880216EA0800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.126122] ACPI: Dynamic OEM Table Load:
[ 0.126126] ACPI: SSDT 0xFFFF880216E9A000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.126640] ACPI: Dynamic OEM Table Load:
[ 0.126643] ACPI: SSDT 0xFFFF88021680CC00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.127477] ACPI: Interpreter enabled
[ 0.127498] ACPI: (supports S0 S3 S4 S5)
[ 0.127499] ACPI: Using IOAPIC for interrupt routing
[ 0.127519] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.134495] ACPI: Power Resource [FN00] (off)
[ 0.134556] ACPI: Power Resource [FN01] (off)
[ 0.134615] ACPI: Power Resource [FN02] (off)
[ 0.134673] ACPI: Power Resource [FN03] (off)
[ 0.134731] ACPI: Power Resource [FN04] (off)
[ 0.135304] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.135308] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.135486] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.135587] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.135588] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.135890] PCI host bridge to bus 0000:00
[ 0.135892] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.135893] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.135894] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.135895] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.135896] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.135897] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.135898] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.135899] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.135900] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.135901] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.135903] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.135908] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.135978] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.135986] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.135991] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.135994] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.136058] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.136064] pci 0000:00:03.0: reg 0x10: [mem 0xf7c14000-0xf7c17fff 64bit]
[ 0.136154] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.136169] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.136221] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.136252] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.136282] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.136297] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1e000-0xf7c1e00f 64bit]
[ 0.136353] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.136416] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.136431] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c1c000-0xf7c1c3ff]
[ 0.136506] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.136549] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.136581] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.136595] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[ 0.136655] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.136688] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.136717] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.136779] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.136843] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.136875] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.136931] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.136989] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.137018] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.137074] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.137129] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.137159] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.137214] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.137269] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.137301] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.137317] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b3ff]
[ 0.137393] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.137436] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.137467] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.137609] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.137621] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.137627] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.137633] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.137640] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.137646] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.137652] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c1a000-0xf7c1a7ff]
[ 0.137683] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.137737] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.137749] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c19000-0xf7c190ff 64bit]
[ 0.137767] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.137884] acpiphp: Slot [1] registered
[ 0.137889] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.137954] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.137973] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.137999] pci 0000:02:00.0: reg 0x18: [mem 0xf7b00000-0xf7b00fff 64bit]
[ 0.138016] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.138104] pci 0000:02:00.0: supports D1 D2
[ 0.138105] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.138142] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.148136] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.148139] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.148142] pci 0000:00:1c.4: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.148146] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.148208] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
[ 0.148232] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff 64bit]
[ 0.148281] pci 0000:03:00.0: reg 0x30: [mem 0xf7a20000-0xf7a2ffff pref]
[ 0.148345] pci 0000:03:00.0: supports D1
[ 0.148346] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.148377] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.156134] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.156139] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.156204] pci 0000:04:00.0: [14f1:8852] type 00 class 0x040000
[ 0.156234] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf79fffff 64bit]
[ 0.156385] pci 0000:04:00.0: supports D1 D2
[ 0.156386] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.156422] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.164137] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.164142] pci 0000:00:1c.6: bridge window [mem 0xf7800000-0xf79fffff]
[ 0.164763] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.164802] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.164841] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.164878] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.164914] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.164951] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.164988] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.165023] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.165276] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.165347] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.165348] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.165350] vgaarb: loaded
[ 0.165351] vgaarb: bridge control possible 0000:00:02.0
[ 0.165414] PCI: Using ACPI for IRQ routing
[ 0.166647] PCI: pci_cache_line_size set to 64 bytes
[ 0.166694] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.166695] e820: reserve RAM buffer [mem 0x8a263000-0x8bffffff]
[ 0.166696] e820: reserve RAM buffer [mem 0x8a6ad000-0x8bffffff]
[ 0.166697] e820: reserve RAM buffer [mem 0x9cdae000-0x9fffffff]
[ 0.166698] e820: reserve RAM buffer [mem 0x9ce97000-0x9fffffff]
[ 0.166700] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[ 0.166701] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.166805] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.166809] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.168828] clocksource: Switched to clocksource hpet
[ 0.173014] VFS: Disk quotas dquot_6.6.0
[ 0.173033] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.173147] pnp: PnP ACPI init
[ 0.173211] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.173214] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.173355] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.173357] system 00:01: [io 0xffff] has been reserved
[ 0.173358] system 00:01: [io 0xffff] has been reserved
[ 0.173359] system 00:01: [io 0xffff] has been reserved
[ 0.173360] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.173361] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.173363] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.173364] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.173365] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.173367] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.173368] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173387] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.173423] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.173425] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.173506] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.173507] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.173509] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.173621] pnp 00:05: [dma 0 disabled]
[ 0.173654] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.173826] pnp 00:06: [dma 0 disabled]
[ 0.173891] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.173928] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.173930] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174251] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.174252] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.174254] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.174255] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.174256] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.174257] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.174259] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.174260] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.174261] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.174263] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.174264] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.174265] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.174267] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.174436] pnp: PnP ACPI: found 9 devices
[ 0.180314] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.180327] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.180329] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.180330] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.180350] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.180351] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.180353] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.180354] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.180355] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.180356] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.180360] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[ 0.180365] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.180367] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.180369] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.180371] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.180375] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff]
[ 0.180378] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.180384] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.180386] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.180389] pci 0000:00:1c.4: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.180392] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.180397] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.180401] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.180407] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.180411] pci 0000:00:1c.6: bridge window [mem 0xf7800000-0xf79fffff]
[ 0.180418] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.180419] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.180420] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.180421] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.180422] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.180423] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.180424] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.180425] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.180426] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.180427] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.180428] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.180429] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
[ 0.180430] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.180431] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.180432] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.180433] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.180434] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.180435] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf79fffff]
[ 0.180483] NET: Registered protocol family 2
[ 0.180620] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.180736] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.180913] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.180933] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.180960] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.181029] NET: Registered protocol family 1
[ 0.181041] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.181395] PCI: CLS 64 bytes, default 64
[ 0.181429] Unpacking initramfs...
[ 0.562127] Freeing initrd memory: 28920K (ffff880034774000 - ffff8800363b2000)
[ 0.562158] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.562160] software IO TLB [mem 0x98dae000-0x9cdae000] (64MB) mapped at [ffff880098dae000-ffff88009cdadfff]
[ 0.562201] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.562202] hw unit of domain pp0-core 2^-14 Joules
[ 0.562203] hw unit of domain package 2^-14 Joules
[ 0.562204] hw unit of domain dram 2^-14 Joules
[ 0.562204] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.562508] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.562542] audit: initializing netlink subsys (disabled)
[ 0.562555] audit: type=2000 audit(1471075113.560:1): initialized
[ 0.562853] Initialise system trusted keyring
[ 0.562948] zbud: loaded
[ 0.563490] Key type asymmetric registered
[ 0.563493] Asymmetric key parser 'x509' registered
[ 0.563512] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.563536] io scheduler noop registered
[ 0.563538] io scheduler deadline registered
[ 0.563548] io scheduler cfq registered (default)
[ 0.563935] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.563941] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.563959] intel_idle: MWAIT substates: 0x42120
[ 0.563960] intel_idle: v0.4.1 model 0x3C
[ 0.563961] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.564129] GHES: HEST is not enabled!
[ 0.564187] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.584567] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.584943] Linux agpgart interface v0.103
[ 0.584991] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.584992] AMD IOMMUv2 functionality not available on this system
[ 0.585342] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.587521] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.587525] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.587641] mousedev: PS/2 mouse device common for all mice
[ 0.587683] rtc_cmos 00:02: RTC can wake from S4
[ 0.587804] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.587831] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.587841] Intel P-state driver initializing.
[ 0.588007] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.589856] NET: Registered protocol family 10
[ 0.590291] mip6: Mobile IPv6
[ 0.590299] NET: Registered protocol family 17
[ 0.590309] mpls_gso: MPLS GSO support
[ 0.590747] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.590769] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.590792] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.590810] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1e
[ 0.590884] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.591224] registered taskstats version 1
[ 0.591273] Loading compiled-in X.509 certificates
[ 0.591968] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.592014] zswap: loaded using pool lzo/zbud
[ 0.593254] rtc_cmos 00:02: setting system clock to 2016-08-13 07:58:33 UTC (1471075113)
[ 0.593454] PM: Hibernation image not present or could not be loaded.
[ 0.595718] Freeing unused kernel memory: 1316K (ffffffff81b14000 - ffffffff81c5d000)
[ 0.595721] Write protecting the kernel read-only data: 10240k
[ 0.596119] Freeing unused kernel memory: 256K (ffff8800015c0000 - ffff880001600000)
[ 0.602643] Freeing unused kernel memory: 1164K (ffff8800018dd000 - ffff880001a00000)
[ 0.615362] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.632268] random: systemd-udevd urandom read with 2 bits of entropy available
[ 0.651998] button: module verification failed: signature and/or required key missing - tainting kernel
[ 0.652272] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.652278] ACPI: Power Button [PWRB]
[ 0.652338] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.652341] ACPI: Power Button [PWRF]
[ 0.653209] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.655613] wmi: Mapper loaded
[ 0.663451] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.663454] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.663825] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.663828] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.667064] ACPI: bus type USB registered
[ 0.667107] usbcore: registered new interface driver usbfs
[ 0.667121] usbcore: registered new interface driver hub
[ 0.667143] usbcore: registered new device driver usb
[ 0.667187] [drm] Initialized drm 1.1.0 20060810
[ 0.668243] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.668662] ehci-pci: EHCI PCI platform driver
[ 0.668871] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.668880] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.668896] ehci-pci 0000:00:1a.0: debug port 2
[ 0.671005] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.671017] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.672793] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.673293] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c1c000
[ 0.675479] SCSI subsystem initialized
[ 0.677908] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000e66000, d4:3d:7e:db:21:9e, XID 0c000800 IRQ 26
[ 0.677913] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.677995] libata version 3.00 loaded.
[ 0.678496] AVX2 version of gcm_enc/dec engaged.
[ 0.678498] AES CTR mode by8 optimization enabled
[ 0.684842] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.684898] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.684901] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.684904] usb usb1: Product: EHCI Host Controller
[ 0.684906] usb usb1: Manufacturer: Linux 4.5.0-2-amd64 ehci_hcd
[ 0.684908] usb usb1: SerialNumber: 0000:00:1a.0
[ 0.685082] hub 1-0:1.0: USB hub found
[ 0.685092] hub 1-0:1.0: 2 ports detected
[ 0.685406] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.685412] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.685424] ehci-pci 0000:00:1d.0: debug port 2
[ 0.689334] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.689481] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c1b000
[ 0.700853] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.700921] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.700923] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.700924] usb usb2: Product: EHCI Host Controller
[ 0.700926] usb usb2: Manufacturer: Linux 4.5.0-2-amd64 ehci_hcd
[ 0.700927] usb usb2: SerialNumber: 0000:00:1d.0
[ 0.701087] hub 2-0:1.0: USB hub found
[ 0.701096] hub 2-0:1.0: 2 ports detected
[ 0.701396] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.701402] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.702487] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.702491] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.702592] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.702595] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.702597] usb usb3: Product: xHCI Host Controller
[ 0.702599] usb usb3: Manufacturer: Linux 4.5.0-2-amd64 xhci-hcd
[ 0.702601] usb usb3: SerialNumber: 0000:00:14.0
[ 0.702754] hub 3-0:1.0: USB hub found
[ 0.702776] hub 3-0:1.0: 14 ports detected
[ 0.707620] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.707626] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.707670] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.707672] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.707674] usb usb4: Product: xHCI Host Controller
[ 0.707676] usb usb4: Manufacturer: Linux 4.5.0-2-amd64 xhci-hcd
[ 0.707678] usb usb4: SerialNumber: 0000:00:14.0
[ 0.707834] hub 4-0:1.0: USB hub found
[ 0.707849] hub 4-0:1.0: 6 ports detected
[ 0.710193] [drm] Memory usable by graphics device = 2048M
[ 0.710197] [drm] Replacing VGA console driver
[ 0.710801] Console: switching to colour dummy device 80x25
[ 0.716912] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.716914] [drm] Driver supports precise vblank timestamp query.
[ 0.717258] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.787570] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.788083] acpi device:60: registered as cooling_device5
[ 0.788163] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 0.788190] [drm] Initialized i915 1.6.0 20151218 for 0000:00:02.0 on minor 0
[ 0.788359] ahci 0000:00:1f.2: version 3.0
[ 0.788521] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
[ 0.788525] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 0.809528] scsi host0: ahci
[ 0.809629] scsi host1: ahci
[ 0.809710] scsi host2: ahci
[ 0.809788] scsi host3: ahci
[ 0.809872] scsi host4: ahci
[ 0.809956] scsi host5: ahci
[ 0.810005] ata1: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a100 irq 29
[ 0.810007] ata2: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a180 irq 29
[ 0.810010] ata3: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a200 irq 29
[ 0.810012] ata4: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a280 irq 29
[ 0.810013] ata5: DUMMY
[ 0.810014] ata6: DUMMY
[ 0.996851] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.012857] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.016845] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 1.076227] fbcon: inteldrmfb (fb0) is primary device
[ 1.119619] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.119635] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.119656] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.119668] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.120276] ata4.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133
[ 1.120277] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.120443] ata2.00: ATA-9: WDC WD60EZRZ-00GZ5B1, 80.00A80, max UDMA/133
[ 1.120444] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.120796] ata4.00: configured for UDMA/133
[ 1.121145] ata2.00: configured for UDMA/133
[ 1.121549] ata1.00: READ LOG DMA EXT failed, trying unqueued
[ 1.121568] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.121569] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0AB0Q, max UDMA/133
[ 1.121570] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.121767] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.121768] ata1.00: configured for UDMA/133
[ 1.122427] ata3.00: ATAPI: HL-DT-ST BD-RE BH16NS40, 1.01, max UDMA/100
[ 1.123156] ata3.00: configured for UDMA/100
[ 1.129249] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.129250] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.129490] hub 1-1:1.0: USB hub found
[ 1.129607] hub 1-1:1.0: 6 ports detected
[ 1.145220] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.145221] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.145358] hub 2-1:1.0: USB hub found
[ 1.145448] hub 2-1:1.0: 8 ports detected
[ 1.148543] usb 3-1: New USB device found, idVendor=0079, idProduct=1802
[ 1.148543] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.148544] usb 3-1: Product: Mayflash Wiimote PC Adapter
[ 1.148544] usb 3-1: Manufacturer: HJZ
[ 1.149779] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.152940] usbcore: registered new interface driver usbhid
[ 1.152940] usbhid: USB HID core driver
[ 1.153363] input: HJZ Mayflash Wiimote PC Adapter as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0079:1802.0001/input/input6
[ 1.208993] hid-generic 0003:0079:1802.0001: input,hidraw0: USB HID v10.01 Keyboard [HJZ Mayflash Wiimote PC Adapter] on usb-0000:00:14.0-1/input0
[ 1.210065] input: HJZ Mayflash Wiimote PC Adapter as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:0079:1802.0002/input/input7
[ 1.260844] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[ 1.264924] hid-generic 0003:0079:1802.0002: input,hidraw1: USB HID v10.01 Mouse [HJZ Mayflash Wiimote PC Adapter] on usb-0000:00:14.0-1/input1
[ 1.400878] Console: switching to colour frame buffer device 240x67
[ 1.403511] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.413034] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 AB0Q PQ: 0 ANSI: 5
[ 1.437065] scsi 1:0:0:0: Direct-Access ATA WDC WD60EZRZ-00G 0A80 PQ: 0 ANSI: 5
[ 1.463762] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH16NS40 1.01 PQ: 0 ANSI: 5
[ 1.475249] scsi 3:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5
[ 1.485705] usb 3-2: New USB device found, idVendor=1a34, idProduct=0809
[ 1.485706] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.485707] usb 3-2: Product: SL-6566
[ 1.502774] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
[ 1.502776] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.502791] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.502845] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.502847] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.502873] sd 0:0:0:0: [sda] Write Protect is off
[ 1.502874] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.502883] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.502946] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.503020] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.503021] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 1.503056] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.503058] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.503073] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.505836] sda: sda1 sda2 sda3
[ 1.506186] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.515377] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.515378] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.515460] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.560842] tsc: Refined TSC clocksource calibration: 2899.998 MHz
[ 1.560845] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29cd4133323, max_idle_ns: 440795296220 ns
[ 1.605872] input: SL-6566 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1A34:0809.0003/input/input8
[ 1.605947] hid-generic 0003:1A34:0809.0003: input,hidraw2: USB HID v1.10 Joystick [SL-6566] on usb-0000:00:14.0-2/input0
[ 1.772835] usb 3-3: new full-speed USB device number 4 using xhci_hcd
[ 1.994056] sdb: sdb1
[ 1.994318] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.020079] usb 3-3: New USB device found, idVendor=0a12, idProduct=0001
[ 2.020081] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.132823] usb 3-4: new high-speed USB device number 5 using xhci_hcd
[ 2.230232] sdc: sdc1
[ 2.230444] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.263427] usb 3-4: New USB device found, idVendor=2659, idProduct=1210
[ 2.263430] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.263431] usb 3-4: Product: MediaTV Pro III (EU)
[ 2.263432] usb 3-4: Manufacturer: Sundtek
[ 2.263432] usb 3-4: SerialNumber: U140218173634
[ 2.384818] usb 3-5: new low-speed USB device number 6 using xhci_hcd
[ 2.518206] usb 3-5: New USB device found, idVendor=046d, idProduct=c517
[ 2.518207] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.518209] usb 3-5: Product: USB Receiver
[ 2.518209] usb 3-5: Manufacturer: Logitech
[ 2.526425] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C517.0004/input/input9
[ 2.560852] clocksource: Switched to clocksource tsc
[ 2.584898] logitech 0003:046D:C517.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[ 2.584907] logitech 0003:046D:C517.0005: fixing up Logitech keyboard report descriptor
[ 2.585231] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C517.0005/input/input10
[ 2.640950] logitech 0003:046D:C517.0005: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[ 2.808792] raid6: sse2x1 gen() 11422 MB/s
[ 2.876777] raid6: sse2x1 xor() 8566 MB/s
[ 2.944789] raid6: sse2x2 gen() 14388 MB/s
[ 3.012786] raid6: sse2x2 xor() 9697 MB/s
[ 3.080783] raid6: sse2x4 gen() 16579 MB/s
[ 3.148784] raid6: sse2x4 xor() 11708 MB/s
[ 3.216770] raid6: avx2x1 gen() 22134 MB/s
[ 3.284780] raid6: avx2x2 gen() 25613 MB/s
[ 3.352778] raid6: avx2x4 gen() 29543 MB/s
[ 3.352779] raid6: using algorithm avx2x4 gen() 29543 MB/s
[ 3.352780] raid6: using avx2x2 recovery algorithm
[ 3.352977] xor: automatically using best checksumming function:
[ 3.392782] avx : 36157.000 MB/sec
[ 3.395571] Btrfs loaded
[ 3.453128] PM: Starting manual resume from disk
[ 3.453131] PM: Hibernation image partition 8:3 present
[ 3.453131] PM: Looking for hibernation image.
[ 3.453233] PM: Image not found (code -22)
[ 3.453234] PM: Hibernation image not present or could not be loaded.
[ 3.500160] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.770931] parport_pc 00:06: reported by Plug and Play ACPI
[ 3.770996] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 3.789896] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.809370] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 3.827240] Bluetooth: Core ver 2.21
[ 3.827269] NET: Registered protocol family 31
[ 3.827271] Bluetooth: HCI device and connection manager initialized
[ 3.827274] Bluetooth: HCI socket layer initialized
[ 3.827277] Bluetooth: L2CAP socket layer initialized
[ 3.827283] Bluetooth: SCO socket layer initialized
[ 3.828026] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
[ 3.828032] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.828454] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 3.828458] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.828460] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 3.828462] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.828463] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 3.828464] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.828466] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 3.828468] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 3.828469] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 3.832166] media: Linux media interface: v0.10
[ 3.835400] Linux video capture interface: v2.00
[ 3.841251] usbcore: registered new interface driver btusb
[ 3.842894] random: nonblocking pool is initialized
[ 3.857055] cx23885 driver version 0.0.4 loaded
[ 3.857174] CORE cx23885[0]: subsystem: 153b:117e, board: TerraTec Cinergy T PCIe Dual [card=34,autodetected]
[ 3.887062] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 3.887095] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 3.887118] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 3.887141] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 3.915580] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 3.915784] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 3.915824] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.915885] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 3.915940] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 3.915991] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 3.916047] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 3.916102] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 3.916241] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 3.916305] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 3.916345] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 3.934995] input: PC Speaker as /devices/platform/pcspkr/input/input22
[ 3.949224] ath: EEPROM regdomain: 0x21
[ 3.949227] ath: EEPROM indicates we should expect a direct regpair map
[ 3.949229] ath: Country alpha2 being used: AU
[ 3.949230] ath: Regpair used: 0x21
[ 3.963372] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 3.963590] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90001240000, irq=17
[ 3.996915] cx25840 9-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[ 4.002594] intel_rapl: Found RAPL domain package
[ 4.002597] intel_rapl: Found RAPL domain core
[ 4.002599] intel_rapl: Found RAPL domain uncore
[ 4.002601] intel_rapl: Found RAPL domain dram
[ 4.010844] cx25840 9-0044: firmware: direct-loading firmware v4l-cx23885-avcore-01.fw
[ 4.101878] ppdev: user-space parallel port driver
[ 4.129129] iTCO_vendor_support: vendor-support=0
[ 4.129708] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.129745] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 4.129826] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.655418] cx25840 9-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[ 4.671426] cx23885_dvb_register() allocating 1 frontend(s)
[ 4.671428] cx23885[0]: cx23885 based dvb card
[ 4.688379] drxk: status = 0x639160d9
[ 4.688380] drxk: detected a drx-3916k, spin A3, xtal 20.250 MHz
[ 4.756081] drxk: DRXK driver version 0.9.4300
[ 4.780121] drxk: frontend initialized.
[ 4.783274] mt2063_attach: Attaching MT2063
[ 4.783276] DVB: registering new adapter (cx23885[0])
[ 4.783279] cx23885 0000:04:00.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-T)...
[ 4.783506] cx23885_dvb_register() allocating 1 frontend(s)
[ 4.783509] cx23885[0]: cx23885 based dvb card
[ 4.796440] drxk: status = 0x639130d9
[ 4.796441] drxk: detected a drx-3913k, spin A3, xtal 20.250 MHz
[ 4.868079] drxk: DRXK driver version 0.9.4300
[ 4.892071] drxk: frontend initialized.
[ 4.892077] mt2063_attach: Attaching MT2063
[ 4.892078] DVB: registering new adapter (cx23885[0])
[ 4.892080] cx23885 0000:04:00.0: DVB: registering adapter 1 frontend 0 (DRXK DVB-C DVB-T)...
[ 4.892265] cx23885_dev_checkrevision() Hardware revision = 0xa5
[ 4.892269] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 18, latency: 0, mmio: 0xf7800000
[ 4.916782] Registered IR keymap rc-nec-terratec-cinergy-xs
[ 4.916857] input: cx23885 IR (TerraTec Cinergy T PCIe Dual) as /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0/input23
[ 4.920417] rc rc0: cx23885 IR (TerraTec Cinergy T PCIe Dual) as /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0
[ 4.922789] lirc_dev: IR Remote Control driver registered, major 247
[ 4.923173] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0
[ 4.923174] IR LIRC bridge handler initialized
[ 6.368110] Adding 3871740k swap on /dev/sda3. Priority:-1 extents:1 across:3871740k SSFS
[ 6.380448] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 6.638763] loop: module loaded
[ 6.687701] nct6775: Found NCT6779D or compatible chip at 0x4e:0xa00
[ 6.704417] usbcore: registered new interface driver xpad
[ 6.719368] i2c /dev entries driver
[ 6.744795] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 6.909504] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.122986] RPC: Registered named UNIX socket transport module.
[ 7.122988] RPC: Registered udp transport module.
[ 7.122989] RPC: Registered tcp transport module.
[ 7.122989] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.125522] FS-Cache: Loaded
[ 7.130207] FS-Cache: Netfs 'nfs' registered for caching
[ 7.135256] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.555608] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.562524] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.565293] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.567521] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 8.607268] r8169 0000:02:00.0 eth0: link down
[ 8.607328] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.627253] systemd-logind[4340]: New seat seat0.
[ 8.629119] systemd-logind[4340]: Watching system buttons on /dev/input/event1 (Power Button)
[ 8.629190] systemd-logind[4340]: Watching system buttons on /dev/input/event2 (Video Bus)
[ 8.629257] systemd-logind[4340]: Watching system buttons on /dev/input/event0 (Power Button)
[ 8.638211] mt2063: detected a mt2063 B3
[ 8.678619] mt2063: detected a mt2063 B3
[ 8.687368] drxk: Error -22 on get_lock_status
[ 8.700080] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.731306] drxk: Error -22 on get_lock_status
[ 8.734884] drxk: Error -22 on get_lock_status
[ 8.746934] drxk: Error -22 on get_lock_status
[ 8.828579] drxk: Error -22 on get_lock_status
[ 8.851926] systemd-logind[4340]: Failed to start user service, ignoring: Unknown unit: user@1000.service
[ 8.869638] systemd-logind[4340]: New session 1 of user htpc.
[ 9.743221] drxk: Error -22 on get_lock_status
[ 9.749351] input: Sundtek Remote Control as /devices/virtual/input/input24
[ 9.758840] drxk: Error -22 on get_lock_status
[ 9.860799] drxk: Error -22 on get_lock_status
[ 10.212285] fuse init (API version 7.24)
[ 10.755144] drxk: Error -22 on get_lock_status
[ 10.770761] drxk: Error -22 on get_lock_status
[ 10.882849] drxk: Error -22 on get_lock_status
[ 11.587352] wlan0: authenticate with 38:10:d5:7b:d9:69
[ 11.593372] wlan0: send auth to 38:10:d5:7b:d9:69 (try 1/3)
[ 11.596009] wlan0: authenticated
[ 11.596628] wlan0: associate with 38:10:d5:7b:d9:69 (try 1/3)
[ 11.601985] wlan0: RX AssocResp from 38:10:d5:7b:d9:69 (capab=0x431 status=0 aid=3)
[ 11.602038] wlan0: associated
[ 11.602065] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 11.620456] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 11.767072] drxk: Error -22 on get_lock_status
[ 11.782712] drxk: Error -22 on get_lock_status
[ 11.904873] drxk: Error -22 on get_lock_status
[ 12.778985] drxk: Error -22 on get_lock_status
[ 12.794602] drxk: Error -22 on get_lock_status
[ 12.926891] drxk: Error -22 on get_lock_status
[ 12.948942] drxk: Error -22 on get_lock_status
[ 13.790907] drxk: Error -22 on get_lock_status
[ 13.806519] drxk: Error -22 on get_lock_status
[ 14.802833] drxk: Error -22 on get_lock_status
[ 14.818417] drxk: Error -22 on get_lock_status
[ 15.814753] drxk: Error -22 on get_lock_status
[ 15.830340] drxk: Error -22 on get_lock_status
[ 16.160460] Bluetooth: RFCOMM TTY layer initialized
[ 16.160467] Bluetooth: RFCOMM socket layer initialized
[ 16.160473] Bluetooth: RFCOMM ver 1.11
[ 16.826728] drxk: Error -22 on get_lock_status
[ 16.842285] drxk: Error -22 on get_lock_status
[ 17.838677] drxk: Error -22 on get_lock_status
[ 17.854254] drxk: Error -22 on get_lock_status
[ 18.850673] drxk: Error -22 on get_lock_status
[ 18.866185] drxk: Error -22 on get_lock_status
[ 19.862626] drxk: Error -22 on get_lock_status
[ 19.878120] drxk: Error -22 on get_lock_status
[ 20.874592] drxk: Error -22 on get_lock_status
[ 20.890060] drxk: Error -22 on get_lock_status
[ 21.886582] drxk: Error -22 on get_lock_status
[ 21.902001] drxk: Error -22 on get_lock_status
[ 22.898506] drxk: Error -22 on get_lock_status
[ 22.913994] drxk: Error -22 on get_lock_status
[ 23.910505] drxk: Error -22 on get_lock_status
[ 23.925946] drxk: Error -22 on get_lock_status
[ 24.922525] drxk: Error -22 on get_lock_status
[ 24.937990] drxk: Error -22 on get_lock_status
[ 25.934486] drxk: Error -22 on get_lock_status
[ 25.949978] drxk: Error -22 on get_lock_status
[ 0.000000] microcode: microcode updated early to revision 0x20, date = 2016-03-16
[ 0.000000] Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-amd64 root=UUID=109fca5d-2cc6-4811-8e5d-4daa845c9384 ro quiet splash
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008a262fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a263000-0x000000008a269fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008a26a000-0x000000008a6acfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a6ad000-0x000000008ac3dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ac3e000-0x000000009cdadfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cdae000-0x000000009ce44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce45000-0x000000009ce96fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ce97000-0x000000009cfc7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfc8000-0x000000009dffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7823/Z87M-G43 (MS-7823), BIOS V2.8 07/20/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 009F000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x9f000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff8800000fd7e0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01d36000, 0x01d36fff] PGTABLE
[ 0.000000] BRK [0x01d37000, 0x01d37fff] PGTABLE
[ 0.000000] BRK [0x01d38000, 0x01d38fff] PGTABLE
[ 0.000000] BRK [0x01d39000, 0x01d39fff] PGTABLE
[ 0.000000] BRK [0x01d3a000, 0x01d3afff] PGTABLE
[ 0.000000] BRK [0x01d3b000, 0x01d3bfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34722000-0x36388fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009CF9B080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009CFA88A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000009CF9B1A0 00D703 (v02 ALASKA A M I 00000036 INTL 20120711)
[ 0.000000] ACPI: FACS 0x000000009CFC7F80 000040
[ 0.000000] ACPI: APIC 0x000000009CFA89B8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009CFA8A30 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x000000009CFA8A78 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x000000009CFA8B20 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000009CFA9060 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x000000009CFA9B38 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000009CFA9B78 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000009CFA9BB0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000009CFA9F20 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x000000009CFAD448 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000009CFAD500 000A26 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21fdf6000-0x21fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008a262fff]
[ 0.000000] node 0: [mem 0x000000008a26a000-0x000000008a6acfff]
[ 0.000000] node 0: [mem 0x000000008ac3e000-0x000000009cdadfff]
[ 0.000000] node 0: [mem 0x000000009ce45000-0x000000009ce96fff]
[ 0.000000] node 0: [mem 0x000000009dfff000-0x000000009dffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[ 0.000000] On node 0 totalpages: 1820165
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9954 pages used for memmap
[ 0.000000] DMA32 zone: 637033 pages, LIFO batch:31
[ 0.000000] Normal zone: 18424 pages used for memmap
[ 0.000000] Normal zone: 1179136 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9f200000-0xc11fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a263000-0x8a269fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a6ad000-0x8ac3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cdae000-0x9ce44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ce97000-0x9cfc7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfc8000-0x9dffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9effffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 32 pages/cpu @ffff88021fa00000 s93720 r8192 d29160 u524288
[ 0.000000] pcpu-alloc: s93720 r8192 d29160 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1791702
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-amd64 root=UUID=109fca5d-2cc6-4811-8e5d-4daa845c9384 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7056396K/7280660K available (5932K kernel code, 1090K rwdata, 2700K rodata, 1336K init, 824K bss, 224264K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2899.742 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.48 BogoMIPS (lpj=11598968)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000033] ACPI: Core revision 20160108
[ 0.009586] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.009617] Security Framework initialized
[ 0.009618] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.009623] AppArmor: AppArmor disabled by boot time parameter
[ 0.010004] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011600] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.012342] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012350] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.012643] Disabling memory control group subsystem
[ 0.012667] CPU: Physical Processor ID: 0
[ 0.012668] CPU: Processor Core ID: 0
[ 0.012673] mce: CPU supports 7 MCE banks
[ 0.012683] CPU0: Thermal monitoring enabled (TM1)
[ 0.012689] process: using mwait in idle threads
[ 0.012692] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.012692] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.012943] Freeing SMP alternatives memory: 24K (ffffffff81c60000 - ffffffff81c66000)
[ 0.022942] ftrace: allocating 24381 entries in 96 pages
[ 0.030236] smpboot: Max logical packages: 2
[ 0.030237] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.030241] DMAR: Host address width 39
[ 0.030242] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.030250] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.030251] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.030254] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.030254] DMAR: RMRR base: 0x0000009dea3000 end: 0x0000009deb1fff
[ 0.030256] DMAR: RMRR base: 0x000000df000000 end: 0x000000df1fffff
[ 0.030257] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.030258] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.030259] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.030554] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.030555] x2apic enabled
[ 0.030560] Switched APIC routing to cluster x2apic.
[ 0.030967] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.070654] TSC deadline timer enabled
[ 0.070657] smpboot: CPU0: Intel(R) Core(TM) i5-4570T CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.070671] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.070687] ... version: 3
[ 0.070687] ... bit width: 48
[ 0.070688] ... generic registers: 4
[ 0.070689] ... value mask: 0000ffffffffffff
[ 0.070689] ... max period: 0000ffffffffffff
[ 0.070690] ... fixed-purpose events: 3
[ 0.070691] ... event mask: 000000070000000f
[ 0.071134] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.071205] x86: Booting SMP configuration:
[ 0.071206] .... node #0, CPUs: #1 #2 #3
[ 0.312778] x86: Booted up 1 node, 4 CPUs
[ 0.312781] smpboot: Total of 4 processors activated (23201.15 BogoMIPS)
[ 0.316427] devtmpfs: initialized
[ 0.316478] x86/mm: Memory block size: 128MB
[ 0.318189] PM: Registering ACPI NVS region [mem 0x8a263000-0x8a269fff] (28672 bytes)
[ 0.318191] PM: Registering ACPI NVS region [mem 0x9ce97000-0x9cfc7fff] (1249280 bytes)
[ 0.318270] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.318323] pinctrl core: initialized pinctrl subsystem
[ 0.318435] NET: Registered protocol family 16
[ 0.328199] cpuidle: using governor ladder
[ 0.332736] cpuidle: using governor menu
[ 0.332786] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.332787] ACPI: bus type PCI registered
[ 0.332789] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.332851] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.332852] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.332857] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.332911] PCI: Using configuration type 1 for base access
[ 0.332929] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.340835] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.340836] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.341024] ACPI: Added _OSI(Module Device)
[ 0.341026] ACPI: Added _OSI(Processor Device)
[ 0.341027] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.341028] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.341451] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.344642] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.345288] ACPI: Dynamic OEM Table Load:
[ 0.345292] ACPI: SSDT 0xFFFF880216FC7C00 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.345778] ACPI: Dynamic OEM Table Load:
[ 0.345781] ACPI: SSDT 0xFFFF8802180A4800 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.346310] ACPI: Dynamic OEM Table Load:
[ 0.346312] ACPI: SSDT 0xFFFF8802180A6E00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.347168] ACPI: Interpreter enabled
[ 0.347188] ACPI: (supports S0 S3 S4 S5)
[ 0.347189] ACPI: Using IOAPIC for interrupt routing
[ 0.347210] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.354288] ACPI: Power Resource [FN00] (off)
[ 0.354349] ACPI: Power Resource [FN01] (off)
[ 0.354409] ACPI: Power Resource [FN02] (off)
[ 0.354468] ACPI: Power Resource [FN03] (off)
[ 0.354525] ACPI: Power Resource [FN04] (off)
[ 0.355106] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.355109] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.355293] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.355396] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.355397] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.355700] PCI host bridge to bus 0000:00
[ 0.355702] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.355703] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.355704] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.355705] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.355706] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.355707] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.355708] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.355709] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.355710] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.355711] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.355712] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.355718] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.355789] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.355796] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.355801] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.355805] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.355869] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.355875] pci 0000:00:03.0: reg 0x10: [mem 0xf7c14000-0xf7c17fff 64bit]
[ 0.355964] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.355980] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.356032] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.356063] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.356093] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.356109] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1e000-0xf7c1e00f 64bit]
[ 0.356165] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.356228] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.356244] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c1c000-0xf7c1c3ff]
[ 0.356319] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.356362] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.356393] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.356408] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[ 0.356468] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.356501] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.356531] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.356593] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.356655] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.356687] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.356743] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.356804] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.356834] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.356890] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.356946] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.356975] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.357031] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.357088] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.357119] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.357135] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b3ff]
[ 0.357211] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.357252] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.357284] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.357427] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.357439] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.357445] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.357452] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.357458] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.357464] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.357471] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c1a000-0xf7c1a7ff]
[ 0.357501] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.357555] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.357568] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c19000-0xf7c190ff 64bit]
[ 0.357585] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.357706] acpiphp: Slot [1] registered
[ 0.357711] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.357777] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.357795] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.357822] pci 0000:02:00.0: reg 0x18: [mem 0xf7b00000-0xf7b00fff 64bit]
[ 0.357839] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.357927] pci 0000:02:00.0: supports D1 D2
[ 0.357928] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.357967] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.364762] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.364765] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.364768] pci 0000:00:1c.4: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.364772] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.364834] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
[ 0.364858] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff 64bit]
[ 0.364908] pci 0000:03:00.0: reg 0x30: [mem 0xf7a20000-0xf7a2ffff pref]
[ 0.364972] pci 0000:03:00.0: supports D1
[ 0.364973] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.365005] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.372760] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.372765] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.372830] pci 0000:04:00.0: [14f1:8852] type 00 class 0x040000
[ 0.372860] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf79fffff 64bit]
[ 0.373012] pci 0000:04:00.0: supports D1 D2
[ 0.373013] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.373048] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.380764] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.380768] pci 0000:00:1c.6: bridge window [mem 0xf7800000-0xf79fffff]
[ 0.381397] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.381436] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.381473] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.381511] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.381547] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.381584] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.381621] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.381658] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.381911] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.381982] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.381984] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.381986] vgaarb: loaded
[ 0.381986] vgaarb: bridge control possible 0000:00:02.0
[ 0.382048] PCI: Using ACPI for IRQ routing
[ 0.383287] PCI: pci_cache_line_size set to 64 bytes
[ 0.383336] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.383337] e820: reserve RAM buffer [mem 0x8a263000-0x8bffffff]
[ 0.383338] e820: reserve RAM buffer [mem 0x8a6ad000-0x8bffffff]
[ 0.383339] e820: reserve RAM buffer [mem 0x9cdae000-0x9fffffff]
[ 0.383340] e820: reserve RAM buffer [mem 0x9ce97000-0x9fffffff]
[ 0.383341] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[ 0.383342] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.383471] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.383474] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.385493] clocksource: Switched to clocksource hpet
[ 0.389912] VFS: Disk quotas dquot_6.6.0
[ 0.389932] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.390041] pnp: PnP ACPI init
[ 0.390108] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.390111] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.390251] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.390252] system 00:01: [io 0xffff] has been reserved
[ 0.390254] system 00:01: [io 0xffff] has been reserved
[ 0.390255] system 00:01: [io 0xffff] has been reserved
[ 0.390256] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.390257] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.390258] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.390259] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.390261] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.390262] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.390263] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.390283] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.390319] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.390320] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.390402] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.390404] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.390405] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.390518] pnp 00:05: [dma 0 disabled]
[ 0.390551] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.390726] pnp 00:06: [dma 0 disabled]
[ 0.390792] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.390828] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.390830] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.391157] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.391158] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.391160] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.391161] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.391162] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.391163] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.391165] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.391166] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.391168] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.391169] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.391170] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.391171] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.391173] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.391341] pnp: PnP ACPI: found 9 devices
[ 0.397233] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.397246] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.397248] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.397249] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.397268] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.397269] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.397270] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.397272] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.397273] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.397274] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.397278] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[ 0.397283] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.397285] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.397286] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.397289] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.397293] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff]
[ 0.397297] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.397302] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.397304] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.397308] pci 0000:00:1c.4: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.397311] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.397315] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.397319] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.397325] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.397329] pci 0000:00:1c.6: bridge window [mem 0xf7800000-0xf79fffff]
[ 0.397336] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.397337] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.397338] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.397339] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.397340] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.397341] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.397342] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.397343] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.397344] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.397345] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.397346] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.397347] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
[ 0.397348] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.397349] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.397350] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.397351] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.397352] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.397353] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf79fffff]
[ 0.397401] NET: Registered protocol family 2
[ 0.397541] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.397655] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.397825] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.397846] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.397873] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.397945] NET: Registered protocol family 1
[ 0.397957] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.398314] PCI: CLS 64 bytes, default 64
[ 0.398350] Unpacking initramfs...
[ 0.787767] Freeing initrd memory: 29084K (ffff880034722000 - ffff880036389000)
[ 0.787800] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.787802] software IO TLB [mem 0x98dae000-0x9cdae000] (64MB) mapped at [ffff880098dae000-ffff88009cdadfff]
[ 0.787846] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 0.787847] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 0.787848] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 0.787849] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 0.787849] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 0.788159] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.788191] audit: initializing netlink subsys (disabled)
[ 0.788206] audit: type=2000 audit(1471075050.780:1): initialized
[ 0.788558] Initialise system trusted keyring
[ 0.788639] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[ 0.788659] zbud: loaded
[ 0.820842] Key type asymmetric registered
[ 0.820845] Asymmetric key parser 'x509' registered
[ 0.820863] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 0.820888] io scheduler noop registered
[ 0.820891] io scheduler deadline registered
[ 0.820901] io scheduler cfq registered (default)
[ 0.821298] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.821303] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.821322] intel_idle: MWAIT substates: 0x42120
[ 0.821323] intel_idle: v0.4.1 model 0x3C
[ 0.821436] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.821465] GHES: HEST is not enabled!
[ 0.821517] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.841904] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.842293] Linux agpgart interface v0.103
[ 0.842332] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.842333] AMD IOMMUv2 functionality not available on this system
[ 0.842601] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.844626] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.844629] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.844735] mousedev: PS/2 mouse device common for all mice
[ 0.844765] rtc_cmos 00:02: RTC can wake from S4
[ 0.844891] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.844916] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.844924] Intel P-state driver initializing.
[ 0.897656] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.898643] NET: Registered protocol family 10
[ 0.898971] mip6: Mobile IPv6
[ 0.898980] NET: Registered protocol family 17
[ 0.898989] mpls_gso: MPLS GSO support
[ 0.899334] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x20
[ 0.899348] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x20
[ 0.899363] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x20
[ 0.899379] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x20
[ 0.899444] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.899722] registered taskstats version 1
[ 0.899765] Loading compiled-in X.509 certificates
[ 0.902158] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 0.902673] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 0.902718] zswap: loaded using pool lzo/zbud
[ 0.903637] rtc_cmos 00:02: setting system clock to 2016-08-13 07:57:30 UTC (1471075050)
[ 0.903794] PM: Hibernation image not present or could not be loaded.
[ 0.905702] Freeing unused kernel memory: 1336K (ffffffff81b12000 - ffffffff81c60000)
[ 0.905704] Write protecting the kernel read-only data: 10240k
[ 0.906057] Freeing unused kernel memory: 196K (ffff8800015cf000 - ffff880001600000)
[ 0.911544] Freeing unused kernel memory: 1396K (ffff8800018a3000 - ffff880001a00000)
[ 0.921867] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.934642] random: systemd-udevd urandom read with 2 bits of entropy available
[ 0.947891] button: module verification failed: signature and/or required key missing - tainting kernel
[ 0.948107] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.948112] ACPI: Power Button [PWRB]
[ 0.948165] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.948168] ACPI: Power Button [PWRF]
[ 0.950452] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 0.951665] wmi: Mapper loaded
[ 0.979159] ACPI: bus type USB registered
[ 0.979184] usbcore: registered new interface driver usbfs
[ 0.979196] usbcore: registered new interface driver hub
[ 0.979213] usbcore: registered new device driver usb
[ 0.979970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.980111] ehci-pci: EHCI PCI platform driver
[ 0.980120] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.980127] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.981212] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.981218] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.981315] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.981317] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.981318] usb usb1: Product: xHCI Host Controller
[ 0.981320] usb usb1: Manufacturer: Linux 4.6.0-1-amd64 xhci-hcd
[ 0.981321] usb usb1: SerialNumber: 0000:00:14.0
[ 0.981469] hub 1-0:1.0: USB hub found
[ 0.981487] hub 1-0:1.0: 14 ports detected
[ 0.984819] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.984827] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 0.985234] SCSI subsystem initialized
[ 0.985797] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.985803] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.985848] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.985850] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.985852] usb usb2: Product: xHCI Host Controller
[ 0.985853] usb usb2: Manufacturer: Linux 4.6.0-1-amd64 xhci-hcd
[ 0.985855] usb usb2: SerialNumber: 0000:00:14.0
[ 0.985982] hub 2-0:1.0: USB hub found
[ 0.985996] hub 2-0:1.0: 6 ports detected
[ 0.987001] libata version 3.00 loaded.
[ 0.987391] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.987398] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 0.987409] ehci-pci 0000:00:1a.0: debug port 2
[ 0.987769] [drm] Initialized drm 1.1.0 20060810
[ 0.990481] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000c78000, d4:3d:7e:db:21:9e, XID 0c000800 IRQ 27
[ 0.990483] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 0.991307] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.991572] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c1c000
[ 0.998123] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.998126] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.998332] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.998334] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.001649] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.001695] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.001697] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.001698] usb usb3: Product: EHCI Host Controller
[ 1.001700] usb usb3: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[ 1.001701] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.002011] hub 3-0:1.0: USB hub found
[ 1.002185] hub 3-0:1.0: 2 ports detected
[ 1.002471] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.002478] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[ 1.002489] ehci-pci 0000:00:1d.0: debug port 2
[ 1.004956] AVX2 version of gcm_enc/dec engaged.
[ 1.004959] AES CTR mode by8 optimization enabled
[ 1.006386] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.006710] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c1b000
[ 1.017571] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.017707] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.017709] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.017711] usb usb4: Product: EHCI Host Controller
[ 1.017712] usb usb4: Manufacturer: Linux 4.6.0-1-amd64 ehci_hcd
[ 1.017714] usb usb4: SerialNumber: 0000:00:1d.0
[ 1.017853] hub 4-0:1.0: USB hub found
[ 1.017860] hub 4-0:1.0: 2 ports detected
[ 1.018108] ahci 0000:00:1f.2: version 3.0
[ 1.018293] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
[ 1.018295] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.042514] scsi host0: ahci
[ 1.042600] scsi host1: ahci
[ 1.042671] scsi host2: ahci
[ 1.042738] scsi host3: ahci
[ 1.043988] scsi host4: ahci
[ 1.045998] scsi host5: ahci
[ 1.046068] ata1: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a100 irq 28
[ 1.046071] ata2: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a180 irq 28
[ 1.046073] ata3: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a200 irq 28
[ 1.046075] ata4: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a280 irq 28
[ 1.046077] ata5: DUMMY
[ 1.046078] ata6: DUMMY
[ 1.046744] [drm] Memory usable by graphics device = 2048M
[ 1.046747] [drm] Replacing VGA console driver
[ 1.047320] Console: switching to colour dummy device 80x25
[ 1.053627] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.053630] [drm] Driver supports precise vblank timestamp query.
[ 1.053902] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.133973] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.134510] acpi device:60: registered as cooling_device5
[ 1.134588] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.134616] [drm] Initialized i915 1.6.0 20160229 for 0000:00:02.0 on minor 0
[ 1.297617] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 1.313612] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.329635] usb 4-1: new high-speed USB device number 2 using ehci-pci
[ 1.356624] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.356644] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.356706] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.356724] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.357282] ata4.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133
[ 1.357285] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.357546] ata2.00: ATA-9: WDC WD60EZRZ-00GZ5B1, 80.00A80, max UDMA/133
[ 1.357549] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.357861] ata4.00: configured for UDMA/133
[ 1.358399] ata2.00: configured for UDMA/133
[ 1.358911] ata1.00: READ LOG DMA EXT failed, trying unqueued
[ 1.359023] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.359025] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0AB0Q, max UDMA/133
[ 1.359027] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.359489] ata3.00: ATAPI: HL-DT-ST BD-RE BH16NS40, 1.01, max UDMA/100
[ 1.359498] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.359502] ata1.00: configured for UDMA/133
[ 1.359668] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 AB0Q PQ: 0 ANSI: 5
[ 1.360311] ata3.00: configured for UDMA/100
[ 1.381822] scsi 1:0:0:0: Direct-Access ATA WDC WD60EZRZ-00G 0A80 PQ: 0 ANSI: 5
[ 1.416506] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH16NS40 1.01 PQ: 0 ANSI: 5
[ 1.426213] fbcon: inteldrmfb (fb0) is primary device
[ 1.428017] scsi 3:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5
[ 1.429250] usb 1-1: New USB device found, idVendor=0079, idProduct=1802
[ 1.429251] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.429251] usb 1-1: Product: Mayflash Wiimote PC Adapter
[ 1.429252] usb 1-1: Manufacturer: HJZ
[ 1.431388] drm: not enough stolen space for compressed buffer (need 8294400 more bytes), disabling. Hint: you may be able to increase stolen memory size in the BIOS to avoid this.
[ 1.431423] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.434725] usbcore: registered new interface driver usbhid
[ 1.434725] usbhid: USB HID core driver
[ 1.435690] input: HJZ Mayflash Wiimote PC Adapter as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/0003:0079:1802.0001/input/input6
[ 1.445930] usb 3-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.445930] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.446192] hub 3-1:1.0: USB hub found
[ 1.446286] hub 3-1:1.0: 6 ports detected
[ 1.462055] usb 4-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.462056] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.462305] hub 4-1:1.0: USB hub found
[ 1.462402] hub 4-1:1.0: 8 ports detected
[ 1.489774] hid-generic 0003:0079:1802.0001: input,hidraw0: USB HID v10.01 Keyboard [HJZ Mayflash Wiimote PC Adapter] on usb-0000:00:14.0-1/input0
[ 1.490684] input: HJZ Mayflash Wiimote PC Adapter as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/0003:0079:1802.0002/input/input7
[ 1.541628] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 1.545825] hid-generic 0003:0079:1802.0002: input,hidraw1: USB HID v10.01 Mouse [HJZ Mayflash Wiimote PC Adapter] on usb-0000:00:14.0-1/input1
[ 1.729691] Console: switching to colour frame buffer device 240x67
[ 1.732739] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.750372] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
[ 1.750377] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.750388] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 1.750389] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 1.750408] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 1.750487] sd 3:0:0:0: [sdc] Write Protect is off
[ 1.750489] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 1.750503] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.750505] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.750537] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.750603] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.750650] sd 0:0:0:0: [sda] Write Protect is off
[ 1.750652] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.750669] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.753948] sda: sda1 sda2 sda3
[ 1.754227] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.764262] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.764265] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.764390] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.767718] usb 1-2: New USB device found, idVendor=1a34, idProduct=0809
[ 1.767720] usb 1-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.767721] usb 1-2: Product: SL-6566
[ 1.785669] tsc: Refined TSC clocksource calibration: 2899.998 MHz
[ 1.785672] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29cd4133323, max_idle_ns: 440795296220 ns
[ 1.887965] input: SL-6566 as /devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1A34:0809.0003/input/input8
[ 1.888049] hid-generic 0003:1A34:0809.0003: input,hidraw2: USB HID v1.10 Joystick [SL-6566] on usb-0000:00:14.0-2/input0
[ 2.053678] usb 1-3: new full-speed USB device number 4 using xhci_hcd
[ 2.249066] sdb: sdb1
[ 2.249696] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.300989] usb 1-3: New USB device found, idVendor=0a12, idProduct=0001
[ 2.300994] usb 1-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.469717] usb 1-4: new high-speed USB device number 5 using xhci_hcd
[ 2.471006] sdc: sdc1
[ 2.471442] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.600335] usb 1-4: New USB device found, idVendor=2659, idProduct=1210
[ 2.600347] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.600354] usb 1-4: Product: MediaTV Pro III (EU)
[ 2.600359] usb 1-4: Manufacturer: Sundtek
[ 2.600365] usb 1-4: SerialNumber: U140218173634
[ 2.721736] usb 1-5: new low-speed USB device number 6 using xhci_hcd
[ 2.785769] clocksource: Switched to clocksource tsc
[ 2.855196] usb 1-5: New USB device found, idVendor=046d, idProduct=c517
[ 2.855198] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.855200] usb 1-5: Product: USB Receiver
[ 2.855201] usb 1-5: Manufacturer: Logitech
[ 2.865017] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C517.0004/input/input9
[ 2.917906] logitech 0003:046D:C517.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[ 2.917923] logitech 0003:046D:C517.0005: fixing up Logitech keyboard report descriptor
[ 2.918431] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:046D:C517.0005/input/input10
[ 2.974041] logitech 0003:046D:C517.0005: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[ 3.033745] raid6: sse2x1 gen() 10673 MB/s
[ 3.101751] raid6: sse2x1 xor() 8427 MB/s
[ 3.169759] raid6: sse2x2 gen() 14238 MB/s
[ 3.237762] raid6: sse2x2 xor() 9479 MB/s
[ 3.305770] raid6: sse2x4 gen() 16406 MB/s
[ 3.373772] raid6: sse2x4 xor() 11463 MB/s
[ 3.441779] raid6: avx2x1 gen() 21800 MB/s
[ 3.509784] raid6: avx2x2 gen() 25375 MB/s
[ 3.577791] raid6: avx2x4 gen() 29178 MB/s
[ 3.577792] raid6: using algorithm avx2x4 gen() 29178 MB/s
[ 3.577792] raid6: using avx2x2 recovery algorithm
[ 3.577984] xor: automatically using best checksumming function:
[ 3.617794] avx : 36212.000 MB/sec
[ 3.620672] Btrfs loaded
[ 3.678046] PM: Starting manual resume from disk
[ 3.678049] PM: Hibernation image partition 8:3 present
[ 3.678050] PM: Looking for hibernation image.
[ 3.678152] PM: Image not found (code -22)
[ 3.678153] PM: Hibernation image not present or could not be loaded.
[ 3.728631] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.999068] parport_pc 00:06: reported by Plug and Play ACPI
[ 3.999135] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 4.023137] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.035287] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.050342] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 4.050413] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 4.050465] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 4.051675] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 4.051679] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.051680] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.051682] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 4.051683] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 4.051684] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 4.051686] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 4.051688] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 4.051689] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 4.064281] random: nonblocking pool is initialized
[ 4.070951] media: Linux media interface: v0.10
[ 4.071281] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 4.071338] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 4.071388] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 4.071439] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 4.071486] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 4.071555] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 4.071722] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 4.071780] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[ 4.075497] Bluetooth: Core ver 2.21
[ 4.075512] NET: Registered protocol family 31
[ 4.075513] Bluetooth: HCI device and connection manager initialized
[ 4.075516] Bluetooth: HCI socket layer initialized
[ 4.075519] Bluetooth: L2CAP socket layer initialized
[ 4.075523] Bluetooth: SCO socket layer initialized
[ 4.077403] Linux video capture interface: v2.00
[ 4.085975] usbcore: registered new interface driver btusb
[ 4.104161] cx23885 driver version 0.0.4 loaded
[ 4.104268] CORE cx23885[0]: subsystem: 153b:117e, board: TerraTec Cinergy T PCIe Dual [card=34,autodetected]
[ 4.140776] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB.PCI0.SBUS.SMBI) (20160108/utaddress-255)
[ 4.140782] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.153588] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.153633] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.153660] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 4.153694] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 4.159031] ath: EEPROM regdomain: 0x21
[ 4.159033] ath: EEPROM indicates we should expect a direct regpair map
[ 4.159035] ath: Country alpha2 being used: AU
[ 4.159035] ath: Regpair used: 0x21
[ 4.159748] input: PC Speaker as /devices/platform/pcspkr/input/input22
[ 4.168820] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.169014] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90001240000, irq=17
[ 4.238137] intel_rapl: Found RAPL domain package
[ 4.238141] intel_rapl: Found RAPL domain core
[ 4.238143] intel_rapl: Found RAPL domain uncore
[ 4.238145] intel_rapl: Found RAPL domain dram
[ 4.240476] cx25840 9-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[ 4.252186] cx25840 9-0044: firmware: direct-loading firmware v4l-cx23885-avcore-01.fw
[ 4.352764] ppdev: user-space parallel port driver
[ 4.368229] iTCO_vendor_support: vendor-support=0
[ 4.368587] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.368625] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 4.370317] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.908979] cx25840 9-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[ 4.925010] cx23885_dvb_register() allocating 1 frontend(s)
[ 4.925012] cx23885[0]: cx23885 based dvb card
[ 4.941570] drxk: status = 0x639160d9
[ 4.941572] drxk: detected a drx-3916k, spin A3, xtal 20.250 MHz
[ 5.009243] drxk: DRXK driver version 0.9.4300
[ 5.033262] drxk: frontend initialized.
[ 5.034736] mt2063_attach: Attaching MT2063
[ 5.034739] DVB: registering new adapter (cx23885[0])
[ 5.034743] cx23885 0000:04:00.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-T)...
[ 5.034964] cx23885_dvb_register() allocating 1 frontend(s)
[ 5.034966] cx23885[0]: cx23885 based dvb card
[ 5.047963] drxk: status = 0x639130d9
[ 5.047964] drxk: detected a drx-3913k, spin A3, xtal 20.250 MHz
[ 5.117222] drxk: DRXK driver version 0.9.4300
[ 5.141224] drxk: frontend initialized.
[ 5.141227] mt2063_attach: Attaching MT2063
[ 5.141228] DVB: registering new adapter (cx23885[0])
[ 5.141230] cx23885 0000:04:00.0: DVB: registering adapter 1 frontend 0 (DRXK DVB-C DVB-T)...
[ 5.141541] cx23885_dev_checkrevision() Hardware revision = 0xa5
[ 5.141546] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 18, latency: 0, mmio: 0xf7800000
[ 5.165938] Registered IR keymap rc-nec-terratec-cinergy-xs
[ 5.166035] input: cx23885 IR (TerraTec Cinergy T PCIe Dual) as /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0/input23
[ 5.169580] rc rc0: cx23885 IR (TerraTec Cinergy T PCIe Dual) as /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0
[ 5.172476] lirc_dev: IR Remote Control driver registered, major 246
[ 5.173387] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0
[ 5.173390] IR LIRC bridge handler initialized
[ 6.620057] Adding 3871740k swap on /dev/sda3. Priority:-1 extents:1 across:3871740k SSFS
[ 6.632299] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 6.917395] loop: module loaded
[ 6.974496] nct6775: Found NCT6779D or compatible chip at 0x4e:0xa00
[ 6.992536] usbcore: registered new interface driver xpad
[ 7.007972] i2c /dev entries driver
[ 7.045436] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.228668] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 7.443901] RPC: Registered named UNIX socket transport module.
[ 7.443903] RPC: Registered udp transport module.
[ 7.443904] RPC: Registered tcp transport module.
[ 7.443905] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 7.446273] FS-Cache: Loaded
[ 7.450927] FS-Cache: Netfs 'nfs' registered for caching
[ 7.455689] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 8.973066] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.980073] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 8.984127] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 8.985664] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 9.024853] r8169 0000:02:00.0 eth0: link down
[ 9.024904] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 9.045501] systemd-logind[5003]: New seat seat0.
[ 9.046580] systemd-logind[5003]: Watching system buttons on /dev/input/event1 (Power Button)
[ 9.046640] systemd-logind[5003]: Watching system buttons on /dev/input/event2 (Video Bus)
[ 9.046711] systemd-logind[5003]: Watching system buttons on /dev/input/event0 (Power Button)
[ 9.057201] mt2063: detected a mt2063 B3
[ 9.096477] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9.100305] mt2063: detected a mt2063 B3
[ 9.109247] drxk: Error -22 on get_lock_status
[ 9.153006] drxk: Error -22 on get_lock_status
[ 9.154337] drxk: Error -22 on get_lock_status
[ 9.166785] drxk: Error -22 on get_lock_status
[ 9.239859] drxk: Error -22 on get_lock_status
[ 9.246244] systemd-logind[5003]: Failed to start user service, ignoring: Unknown unit: user@1000.service
[ 9.263101] systemd-logind[5003]: New session 1 of user htpc.
[ 10.010457] input: Sundtek Remote Control as /devices/virtual/input/input24
[ 10.165035] drxk: Error -22 on get_lock_status
[ 10.178808] drxk: Error -22 on get_lock_status
[ 10.272258] drxk: Error -22 on get_lock_status
[ 10.379416] fuse init (API version 7.24)
[ 11.177063] drxk: Error -22 on get_lock_status
[ 11.190806] drxk: Error -22 on get_lock_status
[ 11.294470] drxk: Error -22 on get_lock_status
[ 11.982257] wlan0: authenticate with 38:10:d5:7b:d9:69
[ 11.988298] wlan0: send auth to 38:10:d5:7b:d9:69 (try 1/3)
[ 11.991088] wlan0: authenticated
[ 11.994522] wlan0: associate with 38:10:d5:7b:d9:69 (try 1/3)
[ 11.999805] wlan0: RX AssocResp from 38:10:d5:7b:d9:69 (capab=0x431 status=0 aid=3)
[ 11.999861] wlan0: associated
[ 11.999887] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 12.014782] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 12.189060] drxk: Error -22 on get_lock_status
[ 12.202801] drxk: Error -22 on get_lock_status
[ 12.316647] drxk: Error -22 on get_lock_status
[ 13.201147] drxk: Error -22 on get_lock_status
[ 13.214875] drxk: Error -22 on get_lock_status
[ 13.338816] drxk: Error -22 on get_lock_status
[ 14.213199] drxk: Error -22 on get_lock_status
[ 14.226904] drxk: Error -22 on get_lock_status
[ 15.225240] drxk: Error -22 on get_lock_status
[ 15.238918] drxk: Error -22 on get_lock_status
[ 16.220787] Bluetooth: RFCOMM TTY layer initialized
[ 16.220803] Bluetooth: RFCOMM socket layer initialized
[ 16.220807] Bluetooth: RFCOMM ver 1.11
[ 16.237257] drxk: Error -22 on get_lock_status
[ 16.250911] drxk: Error -22 on get_lock_status
[ 17.249323] drxk: Error -22 on get_lock_status
[ 17.263004] drxk: Error -22 on get_lock_status
[ 18.261392] drxk: Error -22 on get_lock_status
[ 18.275050] drxk: Error -22 on get_lock_status
[ 19.273479] drxk: Error -22 on get_lock_status
[ 19.287159] drxk: Error -22 on get_lock_status
[ 20.285578] drxk: Error -22 on get_lock_status
[ 20.299214] drxk: Error -22 on get_lock_status
[ 21.297816] drxk: Error -22 on get_lock_status
[ 21.311309] drxk: Error -22 on get_lock_status
[ 22.309709] drxk: Error -22 on get_lock_status
[ 22.323251] drxk: Error -22 on get_lock_status
[ 23.321319] drxk: Error -22 on get_lock_status
[ 23.334797] drxk: Error -22 on get_lock_status
[ 24.332861] drxk: Error -22 on get_lock_status
[ 24.346345] drxk: Error -22 on get_lock_status
[ 25.344506] drxk: Error -22 on get_lock_status
[ 25.357928] drxk: Error -22 on get_lock_status
[ 26.356220] drxk: Error -22 on get_lock_status
[ 26.369455] drxk: Error -22 on get_lock_status
[ 27.367824] drxk: Error -22 on get_lock_status
[ 27.381015] drxk: Error -22 on get_lock_status
[ 28.379410] drxk: Error -22 on get_lock_status
[ 28.392590] drxk: Error -22 on get_lock_status
[ 29.391015] drxk: Error -22 on get_lock_status
[ 29.404198] drxk: Error -22 on get_lock_status
[ 30.402879] drxk: Error -22 on get_lock_status
[ 30.415737] drxk: Error -22 on get_lock_status
[ 0.000000] microcode: microcode updated early to revision 0x20, date = 2016-03-16
[ 0.000000] Linux version 4.7.0-rc7-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.7~rc7-1~exp1 (2016-07-14)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-rc7-amd64 root=UUID=109fca5d-2cc6-4811-8e5d-4daa845c9384 ro quiet splash
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008a262fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a263000-0x000000008a269fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008a26a000-0x000000008a6acfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008a6ad000-0x000000008ac3dfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008ac3e000-0x000000009cdadfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cdae000-0x000000009ce44fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ce45000-0x000000009ce96fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009ce97000-0x000000009cfc7fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009cfc8000-0x000000009dffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f000000-0x00000000df1fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021fdfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: MSI MS-7823/Z87M-G43 (MS-7823), BIOS V2.8 07/20/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x21fe00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-E7FFF uncachable
[ 0.000000] E8000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7E00000000 write-back
[ 0.000000] 1 base 0200000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00C0000000 mask 7FC0000000 uncachable
[ 0.000000] 3 base 00A0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 009F000000 mask 7FFF000000 uncachable
[ 0.000000] 5 base 021FE00000 mask 7FFFE00000 uncachable
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x9f000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd7e0-0x000fd7ef] mapped at [ffff8800000fd7e0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1d955000, 0x1d955fff] PGTABLE
[ 0.000000] BRK [0x1d956000, 0x1d956fff] PGTABLE
[ 0.000000] BRK [0x1d957000, 0x1d957fff] PGTABLE
[ 0.000000] BRK [0x1d958000, 0x1d958fff] PGTABLE
[ 0.000000] BRK [0x1d959000, 0x1d959fff] PGTABLE
[ 0.000000] BRK [0x1d95a000, 0x1d95afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x34634000-0x36311fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009CF9B080 000084 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009CFA88A8 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x000000009CF9B1A0 00D703 (v02 ALASKA A M I 00000036 INTL 20120711)
[ 0.000000] ACPI: FACS 0x000000009CFC7F80 000040
[ 0.000000] ACPI: APIC 0x000000009CFA89B8 000072 (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009CFA8A30 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: ASF! 0x000000009CFA8A78 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: SSDT 0x000000009CFA8B20 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000009CFA9060 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x000000009CFA9B38 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x000000009CFA9B78 000038 (v01 ALASKA A M I 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x000000009CFA9BB0 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x000000009CFA9F20 003528 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: DMAR 0x000000009CFAD448 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x000000009CFAD500 000A26 (v01 Intel_ IsctTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000021fdfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x21fdf6000-0x21fdfafff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008a262fff]
[ 0.000000] node 0: [mem 0x000000008a26a000-0x000000008a6acfff]
[ 0.000000] node 0: [mem 0x000000008ac3e000-0x000000009cdadfff]
[ 0.000000] node 0: [mem 0x000000009ce45000-0x000000009ce96fff]
[ 0.000000] node 0: [mem 0x000000009dfff000-0x000000009dffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000021fdfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021fdfffff]
[ 0.000000] On node 0 totalpages: 1820165
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9954 pages used for memmap
[ 0.000000] DMA32 zone: 637033 pages, LIFO batch:31
[ 0.000000] Normal zone: 18424 pages used for memmap
[ 0.000000] Normal zone: 1179136 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9f200000-0xc11fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a263000-0x8a269fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8a6ad000-0x8ac3dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cdae000-0x9ce44fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ce97000-0x9cfc7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cfc8000-0x9dffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9effffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f000000-0xdf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdf200000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdf200000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] percpu: Embedded 33 pages/cpu @ffff88021fa00000 s98200 r8192 d28776 u524288
[ 0.000000] pcpu-alloc: s98200 r8192 d28776 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1791702
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.7.0-rc7-amd64 root=UUID=109fca5d-2cc6-4811-8e5d-4daa845c9384 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7055780K/7280660K available (5991K kernel code, 1094K rwdata, 2752K rodata, 1352K init, 928K bss, 224880K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2899.735 MHz processor
[ 0.000018] Calibrating delay loop (skipped), value calculated using timer frequency.. 5799.47 BogoMIPS (lpj=11598940)
[ 0.000020] pid_max: default: 32768 minimum: 301
[ 0.000029] ACPI: Core revision 20160422
[ 0.000075] Security Framework initialized
[ 0.000077] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.000081] AppArmor: AppArmor disabled by boot time parameter
[ 0.000424] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.002174] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.002927] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.002934] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.003219] Disabling memory control group subsystem
[ 0.003242] CPU: Physical Processor ID: 0
[ 0.003243] CPU: Processor Core ID: 0
[ 0.003248] mce: CPU supports 7 MCE banks
[ 0.003255] CPU0: Thermal monitoring enabled (TM1)
[ 0.003265] process: using mwait in idle threads
[ 0.003268] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.003269] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.003538] Freeing SMP alternatives memory: 24K (ffffffff9d865000 - ffffffff9d86b000)
[ 0.013763] ftrace: allocating 24644 entries in 97 pages
[ 0.021194] smpboot: Max logical packages: 2
[ 0.021195] smpboot: APIC(0) Converting physical 0 to logical package 0
[ 0.021203] DMAR: Host address width 39
[ 0.021204] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.021208] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.021209] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.021212] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.021213] DMAR: RMRR base: 0x0000009dea3000 end: 0x0000009deb1fff
[ 0.021214] DMAR: RMRR base: 0x000000df000000 end: 0x000000df1fffff
[ 0.021216] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.021217] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.021218] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.021471] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.021472] x2apic enabled
[ 0.021477] Switched APIC routing to cluster x2apic.
[ 0.021885] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061573] TSC deadline timer enabled
[ 0.061575] smpboot: CPU0: Intel(R) Core(TM) i5-4570T CPU @ 2.90GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[ 0.061579] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.061599] ... version: 3
[ 0.061600] ... bit width: 48
[ 0.061601] ... generic registers: 4
[ 0.061601] ... value mask: 0000ffffffffffff
[ 0.061602] ... max period: 0000ffffffffffff
[ 0.061603] ... fixed-purpose events: 3
[ 0.061603] ... event mask: 000000070000000f
[ 0.062023] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.062091] x86: Booting SMP configuration:
[ 0.062092] .... node #0, CPUs: #1 #2 #3
[ 0.303674] x86: Booted up 1 node, 4 CPUs
[ 0.303677] smpboot: Total of 4 processors activated (23201.15 BogoMIPS)
[ 0.319021] devtmpfs: initialized
[ 0.319072] x86/mm: Memory block size: 128MB
[ 0.327690] PM: Registering ACPI NVS region [mem 0x8a263000-0x8a269fff] (28672 bytes)
[ 0.327692] PM: Registering ACPI NVS region [mem 0x9ce97000-0x9cfc7fff] (1249280 bytes)
[ 0.327745] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.339670] pinctrl core: initialized pinctrl subsystem
[ 0.351041] NET: Registered protocol family 16
[ 0.362968] cpuidle: using governor ladder
[ 0.374970] cpuidle: using governor menu
[ 0.374995] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.374996] ACPI: bus type PCI registered
[ 0.374997] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.399015] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.399017] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.399019] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.399072] PCI: Using configuration type 1 for base access
[ 0.399086] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.411058] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.411059] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.439022] ACPI: Added _OSI(Module Device)
[ 0.439023] ACPI: Added _OSI(Processor Device)
[ 0.439024] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.439025] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.443590] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.447524] ACPI: 6 ACPI AML tables successfully acquired and loaded
[ 0.450844] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.451477] ACPI: Dynamic OEM Table Load:
[ 0.451481] ACPI: SSDT 0xFFFF88021683F400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.451962] ACPI: Dynamic OEM Table Load:
[ 0.451966] ACPI: SSDT 0xFFFF880216847000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.452487] ACPI: Dynamic OEM Table Load:
[ 0.452490] ACPI: SSDT 0xFFFF880216F15000 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.453534] ACPI: Interpreter enabled
[ 0.453552] ACPI: (supports S0 S3 S4 S5)
[ 0.453553] ACPI: Using IOAPIC for interrupt routing
[ 0.453573] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.460538] ACPI: Power Resource [FN00] (off)
[ 0.460600] ACPI: Power Resource [FN01] (off)
[ 0.460660] ACPI: Power Resource [FN02] (off)
[ 0.460719] ACPI: Power Resource [FN03] (off)
[ 0.460779] ACPI: Power Resource [FN04] (off)
[ 0.461359] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.461362] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.461544] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[ 0.461647] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.461648] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.461954] PCI host bridge to bus 0000:00
[ 0.461956] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.461957] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.461958] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.461960] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.461961] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.461962] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.461963] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.461964] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.461965] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.461966] pci_bus 0000:00: root bus resource [mem 0xdf200000-0xfeafffff window]
[ 0.461967] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.461973] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.462043] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.462051] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.462055] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.462059] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.462122] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.462129] pci 0000:00:03.0: reg 0x10: [mem 0xf7c14000-0xf7c17fff 64bit]
[ 0.462216] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.462232] pci 0000:00:14.0: reg 0x10: [mem 0xf7c00000-0xf7c0ffff 64bit]
[ 0.462284] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.462315] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.462346] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.462361] pci 0000:00:16.0: reg 0x10: [mem 0xf7c1e000-0xf7c1e00f 64bit]
[ 0.462417] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.462481] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.462496] pci 0000:00:1a.0: reg 0x10: [mem 0xf7c1c000-0xf7c1c3ff]
[ 0.462571] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.462614] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.462645] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.462659] pci 0000:00:1b.0: reg 0x10: [mem 0xf7c10000-0xf7c13fff 64bit]
[ 0.462718] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.462751] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.462781] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.462843] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.462905] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.462937] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
[ 0.462993] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.463050] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.463079] pci 0000:00:1c.5: [8086:8c1a] type 01 class 0x060400
[ 0.463135] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.463191] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.463221] pci 0000:00:1c.6: [8086:8c1c] type 01 class 0x060400
[ 0.463275] pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
[ 0.463332] pci 0000:00:1c.6: System wakeup disabled by ACPI
[ 0.463365] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.463380] pci 0000:00:1d.0: reg 0x10: [mem 0xf7c1b000-0xf7c1b3ff]
[ 0.463455] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.463497] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.463528] pci 0000:00:1f.0: [8086:8c44] type 00 class 0x060100
[ 0.463673] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.463685] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.463694] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.463701] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.463707] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.463714] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.463720] pci 0000:00:1f.2: reg 0x24: [mem 0xf7c1a000-0xf7c1a7ff]
[ 0.463751] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.463806] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.463819] pci 0000:00:1f.3: reg 0x10: [mem 0xf7c19000-0xf7c190ff 64bit]
[ 0.463836] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.463956] acpiphp: Slot [1] registered
[ 0.463961] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.464028] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.464047] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.464073] pci 0000:02:00.0: reg 0x18: [mem 0xf7b00000-0xf7b00fff 64bit]
[ 0.464090] pci 0000:02:00.0: reg 0x20: [mem 0xf0000000-0xf0003fff 64bit pref]
[ 0.464178] pci 0000:02:00.0: supports D1 D2
[ 0.464179] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.464216] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.471706] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.471709] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.471712] pci 0000:00:1c.4: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.471717] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.471778] pci 0000:03:00.0: [168c:0030] type 00 class 0x028000
[ 0.471802] pci 0000:03:00.0: reg 0x10: [mem 0xf7a00000-0xf7a1ffff 64bit]
[ 0.471852] pci 0000:03:00.0: reg 0x30: [mem 0xf7a20000-0xf7a2ffff pref]
[ 0.471917] pci 0000:03:00.0: supports D1
[ 0.471918] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.471949] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.479705] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.479709] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.479775] pci 0000:04:00.0: [14f1:8852] type 00 class 0x040000
[ 0.479804] pci 0000:04:00.0: reg 0x10: [mem 0xf7800000-0xf79fffff 64bit]
[ 0.479955] pci 0000:04:00.0: supports D1 D2
[ 0.479956] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot
[ 0.479991] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.487708] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.487713] pci 0000:00:1c.6: bridge window [mem 0xf7800000-0xf79fffff]
[ 0.488339] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.488379] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.488417] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.488453] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.488490] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.488528] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.488565] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.488602] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.488855] ACPI: Enabled 4 GPEs in block 00 to 3F
[ 0.488915] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.488917] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.488919] vgaarb: loaded
[ 0.488919] vgaarb: bridge control possible 0000:00:02.0
[ 0.488965] PCI: Using ACPI for IRQ routing
[ 0.490199] PCI: pci_cache_line_size set to 64 bytes
[ 0.490250] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.490251] e820: reserve RAM buffer [mem 0x8a263000-0x8bffffff]
[ 0.490252] e820: reserve RAM buffer [mem 0x8a6ad000-0x8bffffff]
[ 0.490253] e820: reserve RAM buffer [mem 0x9cdae000-0x9fffffff]
[ 0.490254] e820: reserve RAM buffer [mem 0x9ce97000-0x9fffffff]
[ 0.490255] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[ 0.490256] e820: reserve RAM buffer [mem 0x21fe00000-0x21fffffff]
[ 0.490359] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.490363] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.492375] amd_nb: Cannot enumerate AMD northbridges
[ 0.492383] clocksource: Switched to clocksource hpet
[ 0.496591] VFS: Disk quotas dquot_6.6.0
[ 0.508396] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.524438] pnp: PnP ACPI init
[ 0.524504] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.524507] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.524646] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.524647] system 00:01: [io 0xffff] has been reserved
[ 0.524649] system 00:01: [io 0xffff] has been reserved
[ 0.524650] system 00:01: [io 0xffff] has been reserved
[ 0.524651] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.524652] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.524653] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.524654] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.524655] system 00:01: [io 0x1800-0x18fe] has been reserved
[ 0.524657] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.524658] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.524679] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.524714] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.524716] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.524795] system 00:04: [io 0x0a00-0x0a0f] has been reserved
[ 0.524796] system 00:04: [io 0x0a10-0x0a1f] has been reserved
[ 0.524798] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.524909] pnp 00:05: [dma 0 disabled]
[ 0.524942] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.525116] pnp 00:06: [dma 0 disabled]
[ 0.525182] pnp 00:06: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.525218] system 00:07: [io 0x04d0-0x04d1] has been reserved
[ 0.525220] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.525547] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.525549] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.525550] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.525551] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.525553] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.525554] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.525555] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.525556] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.525558] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.525559] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.525561] system 00:08: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.525562] system 00:08: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.525563] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.525732] pnp: PnP ACPI: found 9 devices
[ 0.531693] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.531705] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.531707] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.531709] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.531728] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.531729] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.531730] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.531731] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.531733] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.531734] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.531738] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdf200000-0xdf3fffff]
[ 0.531743] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.531744] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.531746] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.531749] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.531754] pci 0000:00:1c.0: bridge window [mem 0xdf200000-0xdf3fffff]
[ 0.531757] pci 0000:00:1c.0: bridge window [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.531762] pci 0000:00:1c.4: PCI bridge to [bus 02]
[ 0.531765] pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
[ 0.531768] pci 0000:00:1c.4: bridge window [mem 0xf7b00000-0xf7bfffff]
[ 0.531771] pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.531776] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 0.531780] pci 0000:00:1c.5: bridge window [mem 0xf7a00000-0xf7afffff]
[ 0.531786] pci 0000:00:1c.6: PCI bridge to [bus 04]
[ 0.531790] pci 0000:00:1c.6: bridge window [mem 0xf7800000-0xf79fffff]
[ 0.531797] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.531798] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.531799] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.531800] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.531801] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.531802] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.531803] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.531804] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[ 0.531805] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[ 0.531806] pci_bus 0000:00: resource 13 [mem 0xdf200000-0xfeafffff window]
[ 0.531807] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.531808] pci_bus 0000:01: resource 1 [mem 0xdf200000-0xdf3fffff]
[ 0.531809] pci_bus 0000:01: resource 2 [mem 0xdf400000-0xdf5fffff 64bit pref]
[ 0.531811] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.531811] pci_bus 0000:02: resource 1 [mem 0xf7b00000-0xf7bfffff]
[ 0.531812] pci_bus 0000:02: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
[ 0.531814] pci_bus 0000:03: resource 1 [mem 0xf7a00000-0xf7afffff]
[ 0.531815] pci_bus 0000:04: resource 1 [mem 0xf7800000-0xf79fffff]
[ 0.604401] NET: Registered protocol family 2
[ 0.620436] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.620550] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.620724] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.620744] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.620771] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.648401] NET: Registered protocol family 1
[ 0.648411] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.648771] PCI: CLS 64 bytes, default 64
[ 0.648802] Unpacking initramfs...
[ 1.035842] Freeing initrd memory: 29560K (ffff880034634000 - ffff880036312000)
[ 1.048465] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.048467] software IO TLB [mem 0x98dae000-0x9cdae000] (64MB) mapped at [ffff880098dae000-ffff88009cdadfff]
[ 1.048489] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 1.048490] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 1.048491] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 1.048492] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 1.048493] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 1.064544] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 1.080442] audit: initializing netlink subsys (disabled)
[ 1.080455] audit: type=2000 audit(1471074934.072:1): initialized
[ 1.080803] Initialise system trusted keyrings
[ 1.080884] workingset: timestamp_bits=37 max_order=21 bucket_order=0
[ 1.080892] zbud: loaded
[ 1.128509] Key type asymmetric registered
[ 1.128510] Asymmetric key parser 'x509' registered
[ 1.148460] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
[ 1.148482] io scheduler noop registered
[ 1.148483] io scheduler deadline registered
[ 1.164450] io scheduler cfq registered (default)
[ 1.164842] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.164846] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.164857] intel_idle: MWAIT substates: 0x42120
[ 1.164858] intel_idle: v0.4.1 model 0x3C
[ 1.164975] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.165068] GHES: HEST is not enabled!
[ 1.165104] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.185472] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 1.185767] Linux agpgart interface v0.103
[ 1.185798] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 1.185799] AMD IOMMUv2 functionality not available on this system
[ 1.186041] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.188369] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.188372] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.188469] mousedev: PS/2 mouse device common for all mice
[ 1.188490] rtc_cmos 00:02: RTC can wake from S4
[ 1.188605] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 1.188632] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.188641] intel_pstate: Intel P-state driver initializing
[ 1.188753] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.260523] NET: Registered protocol family 10
[ 1.260792] mip6: Mobile IPv6
[ 1.260796] NET: Registered protocol family 17
[ 1.260800] mpls_gso: MPLS GSO support
[ 1.261110] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x20
[ 1.261120] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x20
[ 1.261144] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x20
[ 1.261157] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x20
[ 1.261217] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.261413] registered taskstats version 1
[ 1.261416] Loading compiled-in X.509 certificates
[ 1.263499] alg: No test for pkcs1pad(rsa,sha256) (pkcs1pad(rsa-generic,sha256))
[ 1.263928] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[ 1.263949] zswap: loaded using pool lzo/zbud
[ 1.264744] rtc_cmos 00:02: setting system clock to 2016-08-13 07:55:34 UTC (1471074934)
[ 1.264815] PM: Hibernation image not present or could not be loaded.
[ 1.265834] Freeing unused kernel memory: 1352K (ffffffff9d713000 - ffffffff9d865000)
[ 1.265835] Write protecting the kernel read-only data: 10240k
[ 1.265986] Freeing unused kernel memory: 136K (ffff88001d1de000 - ffff88001d200000)
[ 1.269121] Freeing unused kernel memory: 1344K (ffff88001d4b0000 - ffff88001d600000)
[ 1.275892] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.284292] random: systemd-udevd urandom read with 2 bits of entropy available
[ 1.299786] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 1.299790] ACPI: Power Button [PWRB]
[ 1.299839] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 1.299842] ACPI: Power Button [PWRF]
[ 1.300129] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 1.302315] wmi: Mapper loaded
[ 1.331449] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.331452] ACPI: Thermal Zone [TZ00] (28 C)
[ 1.331721] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.331723] ACPI: Thermal Zone [TZ01] (30 C)
[ 1.338043] [drm] Initialized drm 1.1.0 20060810
[ 1.338647] ACPI: bus type USB registered
[ 1.338670] usbcore: registered new interface driver usbfs
[ 1.338680] usbcore: registered new interface driver hub
[ 1.338702] usbcore: registered new device driver usb
[ 1.340580] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.340635] SCSI subsystem initialized
[ 1.341120] ehci-pci: EHCI PCI platform driver
[ 1.341245] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.341251] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.341263] ehci-pci 0000:00:1a.0: debug port 2
[ 1.345166] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.346118] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7c1c000
[ 1.352831] libata version 3.00 loaded.
[ 1.355236] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.355245] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.356479] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.356522] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.356524] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.356525] usb usb1: Product: EHCI Host Controller
[ 1.356527] usb usb1: Manufacturer: Linux 4.7.0-rc7-amd64 ehci_hcd
[ 1.356528] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.356659] hub 1-0:1.0: USB hub found
[ 1.356666] hub 1-0:1.0: 2 ports detected
[ 1.356918] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.356924] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.356934] ehci-pci 0000:00:1d.0: debug port 2
[ 1.360852] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.360872] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7c1b000
[ 1.361381] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000c84000, d4:3d:7e:db:21:9e, XID 0c000800 IRQ 26
[ 1.361384] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.372132] AVX2 version of gcm_enc/dec engaged.
[ 1.372134] AES CTR mode by8 optimization enabled
[ 1.374443] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.374498] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.374501] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.374503] usb usb2: Product: EHCI Host Controller
[ 1.374505] usb usb2: Manufacturer: Linux 4.7.0-rc7-amd64 ehci_hcd
[ 1.374506] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.374643] hub 2-0:1.0: USB hub found
[ 1.374649] hub 2-0:1.0: 2 ports detected
[ 1.374948] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.374956] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.376039] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 1.376045] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.376182] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.376184] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.376186] usb usb3: Product: xHCI Host Controller
[ 1.376187] usb usb3: Manufacturer: Linux 4.7.0-rc7-amd64 xhci-hcd
[ 1.376189] usb usb3: SerialNumber: 0000:00:14.0
[ 1.376519] hub 3-0:1.0: USB hub found
[ 1.376538] hub 3-0:1.0: 14 ports detected
[ 1.380498] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.380504] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.380545] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.380547] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.380548] usb usb4: Product: xHCI Host Controller
[ 1.380550] usb usb4: Manufacturer: Linux 4.7.0-rc7-amd64 xhci-hcd
[ 1.380551] usb usb4: SerialNumber: 0000:00:14.0
[ 1.380686] hub 4-0:1.0: USB hub found
[ 1.380699] hub 4-0:1.0: 6 ports detected
[ 1.381930] ahci 0000:00:1f.2: version 3.0
[ 1.382097] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0xf impl SATA mode
[ 1.382100] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
[ 1.407483] scsi host0: ahci
[ 1.408948] scsi host1: ahci
[ 1.411758] scsi host2: ahci
[ 1.412679] scsi host3: ahci
[ 1.417900] scsi host4: ahci
[ 1.418681] scsi host5: ahci
[ 1.418742] ata1: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a100 irq 28
[ 1.418746] ata2: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a180 irq 28
[ 1.418748] ata3: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a200 irq 28
[ 1.418751] ata4: SATA max UDMA/133 abar m2048@0xf7c1a000 port 0xf7c1a280 irq 28
[ 1.418752] ata5: DUMMY
[ 1.418753] ata6: DUMMY
[ 1.424695] [drm] Memory usable by graphics device = 2048M
[ 1.424699] [drm] Replacing VGA console driver
[ 1.425273] Console: switching to colour dummy device 80x25
[ 1.430527] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 1.430529] [drm] Driver supports precise vblank timestamp query.
[ 1.432768] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.510463] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.510817] acpi device:60: registered as cooling_device9
[ 1.510868] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.510889] [drm] Initialized i915 1.6.0 20160425 for 0000:00:02.0 on minor 0
[ 1.668519] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.684540] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.688528] usb 3-1: new full-speed USB device number 2 using xhci_hcd
[ 1.727678] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.727708] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.728874] ata2.00: ATA-9: WDC WD60EZRZ-00GZ5B1, 80.00A80, max UDMA/133
[ 1.728881] ata2.00: 11721045168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.730228] ata1.00: NCQ Send/Recv Log not supported
[ 1.730235] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0AB0Q, max UDMA/133
[ 1.730240] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.730262] ata2.00: configured for UDMA/133
[ 1.730979] ata1.00: NCQ Send/Recv Log not supported
[ 1.730986] ata1.00: configured for UDMA/133
[ 1.731308] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 AB0Q PQ: 0 ANSI: 5
[ 1.731608] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.731631] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.732243] ata4.00: ATA-9: WDC WD30EZRX-00D8PB0, 80.00A80, max UDMA/133
[ 1.732246] ata4.00: 5860533168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.733002] ata4.00: configured for UDMA/133
[ 1.734570] ata3.00: ATAPI: HL-DT-ST BD-RE BH16NS40, 1.01, max UDMA/100
[ 1.739549] ata3.00: configured for UDMA/100
[ 1.757365] scsi 1:0:0:0: Direct-Access ATA WDC WD60EZRZ-00G 0A80 PQ: 0 ANSI: 5
[ 1.791418] scsi 2:0:0:0: CD-ROM HL-DT-ST BD-RE BH16NS40 1.01 PQ: 0 ANSI: 5
[ 1.798978] scsi 3:0:0:0: Direct-Access ATA WDC WD30EZRX-00D 0A80 PQ: 0 ANSI: 5
[ 1.800829] usb 1-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.800830] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.800993] hub 1-1:1.0: USB hub found
[ 1.801090] hub 1-1:1.0: 6 ports detected
[ 1.801356] fbcon: inteldrmfb (fb0) is primary device
[ 1.817002] usb 2-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.817003] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.817273] hub 2-1:1.0: USB hub found
[ 1.817335] hub 2-1:1.0: 8 ports detected
[ 1.819976] usb 3-1: New USB device found, idVendor=0079, idProduct=1802
[ 1.819977] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.819978] usb 3-1: Product: Mayflash Wiimote PC Adapter
[ 1.819978] usb 3-1: Manufacturer: HJZ
[ 1.823165] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.827268] usbcore: registered new interface driver usbhid
[ 1.827268] usbhid: USB HID core driver
[ 1.828336] input: HJZ Mayflash Wiimote PC Adapter as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0079:1802.0001/input/input6
[ 1.880690] hid-generic 0003:0079:1802.0001: input,hidraw0: USB HID v10.01 Keyboard [HJZ Mayflash Wiimote PC Adapter] on usb-0000:00:14.0-1/input0
[ 1.881653] input: HJZ Mayflash Wiimote PC Adapter as /devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:0079:1802.0002/input/input7
[ 1.932566] usb 3-2: new full-speed USB device number 3 using xhci_hcd
[ 1.936706] hid-generic 0003:0079:1802.0002: input,hidraw1: USB HID v10.01 Mouse [HJZ Mayflash Wiimote PC Adapter] on usb-0000:00:14.0-1/input1
[ 2.048584] tsc: Refined TSC clocksource calibration: 2899.997 MHz
[ 2.048588] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x29cd4058c5c, max_idle_ns: 440795330155 ns
[ 2.132722] Console: switching to colour frame buffer device 240x67
[ 2.146149] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.158862] usb 3-2: New USB device found, idVendor=1a34, idProduct=0809
[ 2.158870] usb 3-2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 2.158875] usb 3-2: Product: SL-6566
[ 2.172452] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.172504] sd 0:0:0:0: [sda] Write Protect is off
[ 2.172508] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.172522] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.172904] sd 3:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.73 TiB)
[ 2.172907] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[ 2.172917] sd 1:0:0:0: [sdb] 11721045168 512-byte logical blocks: (6.00 TB/5.46 TiB)
[ 2.172919] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 2.172978] sd 3:0:0:0: [sdc] Write Protect is off
[ 2.172981] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.172989] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.172991] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.173014] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.173073] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.176104] sda: sda1 sda2 sda3
[ 2.176533] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.187383] sr 2:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.187386] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.187507] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.279157] input: SL-6566 as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/0003:1A34:0809.0003/input/input8
[ 2.279217] hid-generic 0003:1A34:0809.0003: input,hidraw2: USB HID v1.10 Joystick [SL-6566] on usb-0000:00:14.0-2/input0
[ 2.444623] usb 3-3: new full-speed USB device number 4 using xhci_hcd
[ 2.668957] sdb: sdb1
[ 2.669554] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.691989] usb 3-3: New USB device found, idVendor=0a12, idProduct=0001
[ 2.691996] usb 3-3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.804620] usb 3-4: new high-speed USB device number 5 using xhci_hcd
[ 2.873396] sdc: sdc1
[ 2.873661] sd 3:0:0:0: [sdc] Attached SCSI disk
[ 2.939230] usb 3-4: New USB device found, idVendor=2659, idProduct=1210
[ 2.939232] usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.939234] usb 3-4: Product: MediaTV Pro III (EU)
[ 2.939234] usb 3-4: Manufacturer: Sundtek
[ 2.939235] usb 3-4: SerialNumber: U140218173634
[ 3.048732] clocksource: Switched to clocksource tsc
[ 3.064653] usb 3-5: new low-speed USB device number 6 using xhci_hcd
[ 3.198051] usb 3-5: New USB device found, idVendor=046d, idProduct=c517
[ 3.198059] usb 3-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.198063] usb 3-5: Product: USB Receiver
[ 3.198066] usb 3-5: Manufacturer: Logitech
[ 3.214927] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:046D:C517.0004/input/input9
[ 3.269145] logitech 0003:046D:C517.0004: input,hidraw3: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5/input0
[ 3.269183] logitech 0003:046D:C517.0005: fixing up Logitech keyboard report descriptor
[ 3.270288] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.1/0003:046D:C517.0005/input/input10
[ 3.324926] logitech 0003:046D:C517.0005: input,hiddev0,hidraw4: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5/input1
[ 3.508674] raid6: sse2x1 gen() 11424 MB/s
[ 3.576680] raid6: sse2x1 xor() 8577 MB/s
[ 3.644684] raid6: sse2x2 gen() 14479 MB/s
[ 3.712692] raid6: sse2x2 xor() 9726 MB/s
[ 3.780699] raid6: sse2x4 gen() 16724 MB/s
[ 3.848701] raid6: sse2x4 xor() 11618 MB/s
[ 3.916693] raid6: avx2x1 gen() 22073 MB/s
[ 3.984711] raid6: avx2x2 gen() 25436 MB/s
[ 4.052717] raid6: avx2x4 gen() 29462 MB/s
[ 4.052718] raid6: using algorithm avx2x4 gen() 29462 MB/s
[ 4.052719] raid6: using avx2x2 recovery algorithm
[ 4.053128] xor: automatically using best checksumming function:
[ 4.092708] avx : 36299.000 MB/sec
[ 4.272964] Btrfs loaded, crc32c=crc32c-intel
[ 4.272972] BTRFS: selftest: sectorsize: 4096 nodesize: 4096
[ 4.272976] BTRFS: selftest: sectorsize: 4096 nodesize: 8192
[ 4.272980] BTRFS: selftest: sectorsize: 4096 nodesize: 16384
[ 4.272983] BTRFS: selftest: sectorsize: 4096 nodesize: 32768
[ 4.272987] BTRFS: selftest: sectorsize: 4096 nodesize: 65536
[ 4.330144] PM: Starting manual resume from disk
[ 4.330147] PM: Hibernation image partition 8:3 present
[ 4.330148] PM: Looking for hibernation image.
[ 4.330228] PM: Image not found (code -22)
[ 4.330229] PM: Hibernation image not present or could not be loaded.
[ 4.508300] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.795500] parport_pc 00:06: reported by Plug and Play ACPI
[ 4.795566] parport0: PC-style at 0x378, irq 5 [PCSPP]
[ 4.808684] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.819681] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.850415] media: Linux media interface: v0.10
[ 4.856048] Linux video capture interface: v2.00
[ 4.857689] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 4.861863] random: nonblocking pool is initialized
[ 4.882165] Bluetooth: Core ver 2.21
[ 4.882179] NET: Registered protocol family 31
[ 4.882180] Bluetooth: HCI device and connection manager initialized
[ 4.882183] Bluetooth: HCI socket layer initialized
[ 4.882185] Bluetooth: L2CAP socket layer initialized
[ 4.882192] Bluetooth: SCO socket layer initialized
[ 4.883946] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
[ 4.883949] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.883951] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 4.883952] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 4.883954] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 4.883955] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 4.883957] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 4.883958] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 4.883960] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 4.891746] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 4.891800] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 4.891854] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 4.908934] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 4.908991] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 4.909042] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 4.909096] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card1/input17
[ 4.909144] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card1/input18
[ 4.909197] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 4.909253] input: HDA Intel PCH Line Out Side as /devices/pci0000:00/0000:00:1b.0/sound/card1/input20
[ 4.909308] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input21
[ 4.913096] usbcore: registered new interface driver btusb
[ 4.917922] cx23885 driver version 0.0.4 loaded
[ 4.918032] CORE cx23885[0]: subsystem: 153b:117e, board: TerraTec Cinergy T PCIe Dual [card=34,autodetected]
[ 4.981562] ath: EEPROM regdomain: 0x21
[ 4.981564] ath: EEPROM indicates we should expect a direct regpair map
[ 4.981566] ath: Country alpha2 being used: AU
[ 4.981567] ath: Regpair used: 0x21
[ 4.982950] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.983017] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 4.983321] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 4.983392] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 4.989957] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.990161] ieee80211 phy0: Atheros AR9300 Rev:3 mem=0xffffc90001280000, irq=17
[ 4.994789] input: PC Speaker as /devices/platform/pcspkr/input/input22
[ 5.066678] cx25840 10-0044: cx23885 A/V decoder found @ 0x88 (cx23885[0])
[ 5.100692] cx25840 10-0044: firmware: direct-loading firmware v4l-cx23885-avcore-01.fw
[ 5.181336] intel_rapl: Found RAPL domain package
[ 5.181340] intel_rapl: Found RAPL domain core
[ 5.181342] intel_rapl: Found RAPL domain uncore
[ 5.181343] intel_rapl: Found RAPL domain dram
[ 5.192270] ppdev: user-space parallel port driver
[ 5.200153] iTCO_vendor_support: vendor-support=0
[ 5.200788] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 5.200832] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 5.201534] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 5.738499] cx25840 10-0044: loaded v4l-cx23885-avcore-01.fw firmware (16382 bytes)
[ 5.754532] cx23885_dvb_register() allocating 1 frontend(s)
[ 5.754534] cx23885[0]: cx23885 based dvb card
[ 5.771705] drxk: status = 0x639160d9
[ 5.771707] drxk: detected a drx-3916k, spin A3, xtal 20.250 MHz
[ 5.840212] drxk: DRXK driver version 0.9.4300
[ 5.864240] drxk: frontend initialized.
[ 5.867931] mt2063_attach: Attaching MT2063
[ 5.867935] DVB: registering new adapter (cx23885[0])
[ 5.867941] cx23885 0000:04:00.0: DVB: registering adapter 0 frontend 0 (DRXK DVB-T)...
[ 5.868210] cx23885_dvb_register() allocating 1 frontend(s)
[ 5.868212] cx23885[0]: cx23885 based dvb card
[ 5.880532] drxk: status = 0x639130d9
[ 5.880534] drxk: detected a drx-3913k, spin A3, xtal 20.250 MHz
[ 5.948220] drxk: DRXK driver version 0.9.4300
[ 5.972251] drxk: frontend initialized.
[ 5.972254] mt2063_attach: Attaching MT2063
[ 5.972255] DVB: registering new adapter (cx23885[0])
[ 5.972257] cx23885 0000:04:00.0: DVB: registering adapter 1 frontend 0 (DRXK DVB-C DVB-T)...
[ 5.972561] cx23885_dev_checkrevision() Hardware revision = 0xa5
[ 5.972567] cx23885[0]/0: found at 0000:04:00.0, rev: 4, irq: 18, latency: 0, mmio: 0xf7800000
[ 5.996927] Registered IR keymap rc-nec-terratec-cinergy-xs
[ 5.997069] input: cx23885 IR (TerraTec Cinergy T PCIe Dual) as /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0/input23
[ 6.000713] rc rc0: cx23885 IR (TerraTec Cinergy T PCIe Dual) as /devices/pci0000:00/0000:00:1c.6/0000:04:00.0/rc/rc0
[ 6.006577] lirc_dev: IR Remote Control driver registered, major 246
[ 6.008669] rc rc0: lirc_dev: driver ir-lirc-codec (cx23885) registered at minor = 0
[ 6.008672] IR LIRC bridge handler initialized
[ 7.473311] Adding 3871740k swap on /dev/sda3. Priority:-1 extents:1 across:3871740k SSFS
[ 7.485648] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 7.730982] loop: module loaded
[ 7.779228] nct6775: Found NCT6779D or compatible chip at 0x4e:0xa00
[ 7.796020] usbcore: registered new interface driver xpad
[ 7.811143] i2c /dev entries driver
[ 7.837372] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.013985] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: (null)
[ 8.249222] RPC: Registered named UNIX socket transport module.
[ 8.249224] RPC: Registered udp transport module.
[ 8.249224] RPC: Registered tcp transport module.
[ 8.249225] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 8.257121] FS-Cache: Loaded
[ 8.264751] FS-Cache: Netfs 'nfs' registered for caching
[ 8.332227] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 10.027070] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.035962] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.040233] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.043231] r8169 0000:02:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-2.fw
[ 10.083815] r8169 0000:02:00.0 eth0: link down
[ 10.083868] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.095147] systemd-logind[5248]: New seat seat0.
[ 10.097192] systemd-logind[5248]: Watching system buttons on /dev/input/event1 (Power Button)
[ 10.097246] systemd-logind[5248]: Watching system buttons on /dev/input/event2 (Video Bus)
[ 10.097343] systemd-logind[5248]: Watching system buttons on /dev/input/event0 (Power Button)
[ 10.112038] mt2063: detected a mt2063 B3
[ 10.155009] mt2063: detected a mt2063 B3
[ 10.163970] drxk: Error -22 on get_lock_status
[ 10.172944] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 10.208535] drxk: Error -22 on get_lock_status
[ 10.210394] drxk: Error -22 on get_lock_status
[ 10.222337] drxk: Error -22 on get_lock_status
[ 10.304473] drxk: Error -22 on get_lock_status
[ 10.319413] systemd-logind[5248]: Failed to start user service, ignoring: Unknown unit: user@1000.service
[ 10.342754] systemd-logind[5248]: New session 1 of user htpc.
[ 11.220565] drxk: Error -22 on get_lock_status
[ 11.234365] drxk: Error -22 on get_lock_status
[ 11.273439] input: Sundtek Remote Control as /devices/virtual/input/input24
[ 11.336979] drxk: Error -22 on get_lock_status
[ 11.592708] fuse init (API version 7.25)
[ 12.232618] drxk: Error -22 on get_lock_status
[ 12.246403] drxk: Error -22 on get_lock_status
[ 12.359218] drxk: Error -22 on get_lock_status
[ 13.053039] wlan0: authenticate with 38:10:d5:7b:d9:69
[ 13.061263] wlan0: send auth to 38:10:d5:7b:d9:69 (try 1/3)
[ 13.063967] wlan0: authenticated
[ 13.065555] wlan0: associate with 38:10:d5:7b:d9:69 (try 1/3)
[ 13.071071] wlan0: RX AssocResp from 38:10:d5:7b:d9:69 (capab=0x431 status=0 aid=3)
[ 13.071124] wlan0: associated
[ 13.071149] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 13.089880] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 13.244619] drxk: Error -22 on get_lock_status
[ 13.258398] drxk: Error -22 on get_lock_status
[ 13.381413] drxk: Error -22 on get_lock_status
[ 14.256631] drxk: Error -22 on get_lock_status
[ 14.270444] drxk: Error -22 on get_lock_status
[ 14.403611] drxk: Error -22 on get_lock_status
[ 15.268712] drxk: Error -22 on get_lock_status
[ 15.282498] drxk: Error -22 on get_lock_status
[ 16.280761] drxk: Error -22 on get_lock_status
[ 16.294524] drxk: Error -22 on get_lock_status
[ 17.121846] Bluetooth: RFCOMM TTY layer initialized
[ 17.121853] Bluetooth: RFCOMM socket layer initialized
[ 17.121857] Bluetooth: RFCOMM ver 1.11
[ 17.292818] drxk: Error -22 on get_lock_status
[ 17.306631] drxk: Error -22 on get_lock_status
[ 18.304906] drxk: Error -22 on get_lock_status
[ 18.318673] drxk: Error -22 on get_lock_status
[ 19.317036] drxk: Error -22 on get_lock_status
[ 19.330730] drxk: Error -22 on get_lock_status
[ 20.329149] drxk: Error -22 on get_lock_status
[ 20.342910] drxk: Error -22 on get_lock_status
[ 21.341257] drxk: Error -22 on get_lock_status
[ 21.354956] drxk: Error -22 on get_lock_status
[ 22.353313] drxk: Error -22 on get_lock_status
[ 22.367046] drxk: Error -22 on get_lock_status
[ 23.365717] drxk: Error -22 on get_lock_status
[ 23.379405] drxk: Error -22 on get_lock_status
[ 24.378231] drxk: Error -22 on get_lock_status
[ 24.392001] drxk: Error -22 on get_lock_status
[ 25.390805] drxk: Error -22 on get_lock_status
[ 25.404565] drxk: Error -22 on get_lock_status
[ 26.403365] drxk: Error -22 on get_lock_status
[ 26.417145] drxk: Error -22 on get_lock_status
[ 27.415986] drxk: Error -22 on get_lock_status
[ 27.429722] drxk: Error -22 on get_lock_status
[ 28.428558] drxk: Error -22 on get_lock_status
[ 28.442324] drxk: Error -22 on get_lock_status
[ 29.441120] drxk: Error -22 on get_lock_status
[ 29.454894] drxk: Error -22 on get_lock_status
[ 30.453677] drxk: Error -22 on get_lock_status
[ 30.467497] drxk: Error -22 on get_lock_status
[ 31.466225] drxk: Error -22 on get_lock_status
[ 31.480144] drxk: Error -22 on get_lock_status
[ 32.478872] drxk: Error -22 on get_lock_status
[ 32.492769] drxk: Error -22 on get_lock_status
[ 33.491407] drxk: Error -22 on get_lock_status
[ 33.505341] drxk: Error -22 on get_lock_status
[ 34.503861] drxk: Error -22 on get_lock_status
[ 34.517769] drxk: Error -22 on get_lock_status
[ 35.515988] drxk: Error -22 on get_lock_status
[ 35.529932] drxk: Error -22 on get_lock_status
[ 36.528080] drxk: Error -22 on get_lock_status
[ 36.542019] drxk: Error -22 on get_lock_status
[ 37.540170] drxk: Error -22 on get_lock_status
[ 37.554085] drxk: Error -22 on get_lock_status
[ 38.552236] drxk: Error -22 on get_lock_status
[ 38.566176] drxk: Error -22 on get_lock_status
[ 39.564311] drxk: Error -22 on get_lock_status
[ 39.578306] drxk: Error -22 on get_lock_status
[ 40.576477] drxk: Error -22 on get_lock_status
[ 40.590379] drxk: Error -22 on get_lock_status
[ 41.588580] drxk: Error -22 on get_lock_status
[ 41.602495] drxk: Error -22 on get_lock_status
[ 42.600655] drxk: Error -22 on get_lock_status
[ 42.614541] drxk: Error -22 on get_lock_status
[ 43.612788] drxk: Error -22 on get_lock_status
[ 43.626647] drxk: Error -22 on get_lock_status
[ 44.624901] drxk: Error -22 on get_lock_status
[ 44.638753] drxk: Error -22 on get_lock_status
[ 45.637005] drxk: Error -22 on get_lock_status
[ 45.650803] drxk: Error -22 on get_lock_status
[ 46.649043] drxk: Error -22 on get_lock_status
[ 46.662843] drxk: Error -22 on get_lock_status
[ 47.661115] drxk: Error -22 on get_lock_status
[ 47.674908] drxk: Error -22 on get_lock_status
[ 48.673168] drxk: Error -22 on get_lock_status
[ 48.687061] drxk: Error -22 on get_lock_status
[ 49.685271] drxk: Error -22 on get_lock_status
[ 49.699109] drxk: Error -22 on get_lock_status
[ 50.697367] drxk: Error -22 on get_lock_status
[ 50.711193] drxk: Error -22 on get_lock_status
[ 51.709510] drxk: Error -22 on get_lock_status
[ 51.723208] drxk: Error -22 on get_lock_status
[ 52.721619] drxk: Error -22 on get_lock_status
[ 52.735316] drxk: Error -22 on get_lock_status
[ 53.733666] drxk: Error -22 on get_lock_status
[ 53.747351] drxk: Error -22 on get_lock_status
[ 54.745796] drxk: Error -22 on get_lock_status
[ 54.759403] drxk: Error -22 on get_lock_status
[ 55.757902] drxk: Error -22 on get_lock_status
[ 55.771449] drxk: Error -22 on get_lock_status
[ 56.769971] drxk: Error -22 on get_lock_status
[ 56.783527] drxk: Error -22 on get_lock_status
[ 57.782030] drxk: Error -22 on get_lock_status
[ 57.795608] drxk: Error -22 on get_lock_status
[ 58.794094] drxk: Error -22 on get_lock_status
[ 58.807666] drxk: Error -22 on get_lock_status
[ 59.806174] drxk: Error -22 on get_lock_status
[ 59.819708] drxk: Error -22 on get_lock_status
[ 60.818201] drxk: Error -22 on get_lock_status
[ 60.831735] drxk: Error -22 on get_lock_status
[ 61.830314] drxk: Error -22 on get_lock_status
[ 61.843843] drxk: Error -22 on get_lock_status
[ 62.842357] drxk: Error -22 on get_lock_status
[ 62.855901] drxk: Error -22 on get_lock_status
[ 63.854466] drxk: Error -22 on get_lock_status
[ 63.867958] drxk: Error -22 on get_lock_status
[ 64.866581] drxk: Error -22 on get_lock_status
[ 64.880022] drxk: Error -22 on get_lock_status
Reply to: