Bug#833009: linux-image-4.6.0-1-amd64: Hibernation does not work on Asus E200HA because of i915 and i2c_designware
Package: src:linux
Version: 4.6.4-1
Severity: normal
Tags: upstream
I have problems that I can not suspend or hibernate my E200HA. After
some reserach I found this Web page:
https://01.org/blogs/rzhang/2015/best-practice-debug-linux-suspend/hibernate-issues
Maybe the suspend is not supported, but the hibernate should, because
of this message on kern.log:
Jul 28 22:56:00 lal kernel: [ 0.472724] ACPI: (supports S0 S4 S5)
So, doing some extra research I suspect the problem is in the module
i915 and on the module i2c_designware. Because switching to a text
console and issuing the command: "echo disk > /sys/power/state" the
system hibernate and awakes when I request. But it awakes without
keyboard and with following messages on the console:
[ 50.827873] [drm] stuck on blitter ring
[ 50.834932] [drm] stuck on bsd ring
[ 50.841830] [drm] stuck on video enhancement ring
[ 50.851177] [drm] GPU HANG: ecode 8:0:0x7a2af415, reason: Ring hung, action: reset
[ 50.854730] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[ 50.858380] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[ 50.860886] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[ 50.863336] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[ 50.865839] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[ 50.868532] [drm:i915_set_reset_status [i915]] *ERROR* gpu hanging too fast, banning!
[ 50.873485] drm/i915: Resetting chip after gpu hang
[ 51.729188] IPv6: ADDRCONF(NETDEV_CHANGE): enx0019fd4cb596: link becomes ready
[ 51.737806] asix 1-4:1.0 enx0019fd4cb596: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 129.340496] i2c_designware 808622C1:00: timeout in enabling adapter
[ 130.348085] i2c_designware 808622C1:00: controller timed out
[ 130.355959] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
Kind regards
Jose M Calhariz
-- Package-specific info:
** Version:
Linux version 4.6.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.4.0 20160609 (Debian 5.4.0-6) ) #1 SMP Debian 4.6.4-1 (2016-07-18)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.6.0-1-amd64 root=UUID=577ff77a-2aa2-4c43-9c83-91e107b674c2 ro printk.time=n initcall_debug no_console_suspend
** Tainted: E (8192)
* Unsigned module has been loaded (currently expected).
** Kernel log:
[ 49.008511] call regulatory.0+ returned 0 after 0 usecs
[ 49.010919] calling intel_backlight+ @ 2728, parent: card0-eDP-1
[ 49.013223] call intel_backlight+ returned 0 after 0 usecs
[ 49.015521] calling input6+ @ 2728, parent: LNXVIDEO:00
[ 49.017797] call input6+ returned 0 after 0 usecs
[ 49.020078] calling input7+ @ 2728, parent: pcspkr
[ 49.021968] call input7+ returned 0 after 17 usecs
[ 49.023843] calling input8+ @ 2728, parent: i2c-ELAN0100:00
[ 49.025720] call input8+ returned 0 after 0 usecs
[ 49.027601] calling coretemp.0+ @ 2728, parent: platform
[ 49.029487] call coretemp.0+ returned 0 after 0 usecs
[ 49.031392] calling asus-nb-wmi+ @ 2728, parent: platform
[ 49.033284] call asus-nb-wmi+ returned 0 after 1 usecs
[ 49.035181] calling input9+ @ 2728, parent: asus-nb-wmi
[ 49.037073] call input9+ returned 0 after 0 usecs
[ 49.038960] calling input10+ @ 2728, parent: 0018:0B05:8585.0001
[ 49.040893] call input10+ returned 0 after 19 usecs
[ 49.042822] calling input10::numlock+ @ 2728, parent: input10
[ 49.044753] call input10::numlock+ returned 0 after 0 usecs
[ 49.046684] calling input10::capslock+ @ 2728, parent: input10
[ 49.048625] call input10::capslock+ returned 0 after 0 usecs
[ 49.050570] calling input10::scrolllock+ @ 2728, parent: input10
[ 49.052528] call input10::scrolllock+ returned 0 after 0 usecs
[ 49.054491] calling input10::compose+ @ 2728, parent: input10
[ 49.056460] call input10::compose+ returned 0 after 0 usecs
[ 49.058429] calling input10::kana+ @ 2728, parent: input10
[ 49.060402] call input10::kana+ returned 0 after 0 usecs
[ 49.062379] calling rfkill1+ @ 2728, parent: phy0
[ 49.064358] call rfkill1+ returned 0 after 10 usecs
[ 49.066337] PM: restore of devices complete after 4600.592 msecs
[ 49.068386] usb 1-4:1.0: rebind failed: -517
[ 49.070372] usb 1-3:1.0: rebind failed: -517
[ 49.072323] usb 1-3:1.1: rebind failed: -517
[ 49.074671] PM: Image restored successfully.
[ 49.074693] PM: Basic memory bitmaps freed
[ 49.074699] Restarting tasks ... done.
[ 49.089295] pci_bus 0000:01: Allocating resources
[ 49.089491] pcieport 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 49.089498] pcieport 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 49.089509] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 49.089514] pcieport 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 49.089518] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 49.089522] pcieport 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 49.089544] pcieport 0000:00:1c.0: BAR 15: assigned [mem 0x91700000-0x918fffff 64bit pref]
[ 49.091834] pcieport 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 49.129302] i2c_designware 808622C1:00: timeout in enabling adapter
[ 49.879748] asix 1-4:1.0 eth0: register 'asix' at usb-0000:00:14.0-4, ASIX AX88772 USB 2.0 Ethernet, 00:19:fd:4c:b5:96
[ 49.898272] asix 1-4:1.0 enx0019fd4cb596: renamed from eth0
[ 49.957592] IPv6: ADDRCONF(NETDEV_UP): enx0019fd4cb596: link is not ready
[ 49.964253] asix 1-4:1.0 enx0019fd4cb596: link down
[ 49.971027] IPv6: ADDRCONF(NETDEV_UP): enx0019fd4cb596: link is not ready
[ 50.131283] i2c_designware 808622C1:00: controller timed out
[ 50.137049] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 50.141080] i2c_hid i2c-PDEC3393:00: failed to set a report to device.
[ 50.827873] [drm] stuck on blitter ring
[ 50.834932] [drm] stuck on bsd ring
[ 50.841830] [drm] stuck on video enhancement ring
[ 50.851177] [drm] GPU HANG: ecode 8:0:0x7a2af415, reason: Ring hung, action: reset
[ 50.854730] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[ 50.858380] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[ 50.860886] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[ 50.863336] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[ 50.865839] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[ 50.868532] [drm:i915_set_reset_status [i915]] *ERROR* gpu hanging too fast, banning!
[ 50.873485] drm/i915: Resetting chip after gpu hang
[ 51.729188] IPv6: ADDRCONF(NETDEV_CHANGE): enx0019fd4cb596: link becomes ready
[ 51.737806] asix 1-4:1.0 enx0019fd4cb596: link up, 100Mbps, full-duplex, lpa 0xCDE1
[ 129.340496] i2c_designware 808622C1:00: timeout in enabling adapter
[ 130.348085] i2c_designware 808622C1:00: controller timed out
[ 130.355959] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 130.426880] i2c_designware 808622C1:00: timeout in enabling adapter
[ 131.431982] i2c_designware 808622C1:00: controller timed out
[ 131.439702] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 136.871290] i2c_designware 808622C1:00: timeout in enabling adapter
[ 137.876403] i2c_designware 808622C1:00: controller timed out
[ 137.884162] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 138.212346] i2c_designware 808622C1:00: timeout in enabling adapter
[ 139.220418] i2c_designware 808622C1:00: controller timed out
[ 139.228293] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 144.871431] i2c_designware 808622C1:00: timeout in enabling adapter
[ 145.876884] i2c_designware 808622C1:00: controller timed out
[ 145.884834] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 145.919430] i2c_designware 808622C1:00: timeout in enabling adapter
[ 146.924898] i2c_designware 808622C1:00: controller timed out
[ 146.933033] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 147.164894] i2c_designware 808622C1:00: timeout in enabling adapter
[ 148.173113] i2c_designware 808622C1:00: controller timed out
[ 148.181329] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 647.787040] i2c_designware 808622C1:00: timeout in enabling adapter
[ 648.795092] i2c_designware 808622C1:00: controller timed out
[ 648.803354] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 649.684271] i2c_designware 808622C1:00: timeout in enabling adapter
[ 650.691091] i2c_designware 808622C1:00: controller timed out
[ 650.699282] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 652.933555] i2c_designware 808622C1:00: timeout in enabling adapter
[ 653.939216] i2c_designware 808622C1:00: controller timed out
[ 653.946957] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
[ 665.777290] i2c_designware 808622C1:00: timeout in enabling adapter
[ 666.783688] i2c_designware 808622C1:00: controller timed out
[ 666.791237] i2c_designware 808622C1:00: Unknown Synopsys component type: 0x00000000
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: E200HA
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: E200HA.210
board_vendor: ASUSTeK COMPUTER INC.
board_name: E200HA
board_version: 1.0
** Loaded modules:
cpufreq_stats(E)
cpufreq_conservative(E)
cpufreq_userspace(E)
cpufreq_powersave(E)
bnep(E)
arc4(E)
joydev(E)
iTCO_wdt(E)
iTCO_vendor_support(E)
hid_generic(E)
asus_nb_wmi(E)
asus_wmi(E)
sparse_keymap(E)
evdev(E)
intel_rapl(E)
intel_powerclamp(E)
coretemp(E)
kvm_intel(E)
kvm(E)
irqbypass(E)
crct10dif_pclmul(E)
crc32_pclmul(E)
ghash_clmulni_intel(E)
efi_pstore(E)
efivars(E)
pcspkr(E)
battery(E)
elan_i2c(E)
nls_utf8(E)
nls_cp437(E)
vfat(E)
fat(E)
ath10k_pci(E)
ath10k_core(E)
ath(E)
mac80211(E)
cfg80211(E)
asix(E)
uvcvideo(E)
videobuf2_vmalloc(E)
btusb(E)
videobuf2_memops(E)
btrtl(E)
videobuf2_v4l2(E)
usbnet(E)
btbcm(E)
videobuf2_core(E)
libphy(E)
btintel(E)
mii(E)
videodev(E)
media(E)
bluetooth(E)
rfkill(E)
i915(E)
lpc_ich(E)
mfd_core(E)
drm_kms_helper(E)
shpchp(E)
drm(E)
i2c_algo_bit(E)
processor_thermal_device(E)
intel_soc_dts_iosf(E)
wmi(E)
8250_fintek(E)
snd_intel_sst_acpi(E)
snd_intel_sst_core(E)
snd_soc_sst_mfld_platform(E)
snd_soc_sst_match(E)
snd_soc_core(E)
snd_compress(E)
dw_dmac(E)
snd_pcm(E)
dw_dmac_core(E)
snd_timer(E)
video(E)
snd(E)
i2c_designware_platform(E)
soundcore(E)
i2c_designware_core(E)
tpm_crb(E)
soc_button_array(E)
int3403_thermal(E)
int3400_thermal(E)
int340x_thermal_zone(E)
acpi_thermal_rel(E)
asus_wireless(E)
tpm_tis(E)
tpm(E)
acpi_pad(E)
ac(E)
processor(E)
button(E)
efivarfs(E)
autofs4(E)
ext4(E)
ecb(E)
crc16(E)
jbd2(E)
crc32c_generic(E)
mbcache(E)
crc32c_intel(E)
mmc_block(E)
aesni_intel(E)
aes_x86_64(E)
glue_helper(E)
lrw(E)
gf128mul(E)
ablk_helper(E)
cryptd(E)
xhci_pci(E)
xhci_hcd(E)
thermal(E)
usbcore(E)
usb_common(E)
fjes(E)
i2c_hid(E)
hid(E)
sdhci_acpi(E)
sdhci(E)
mmc_core(E)
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
source /etc/network/interfaces.d/*
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: wlp1s0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 74:c6:3b:22:c8:e7 brd ff:ff:ff:ff:ff:ff
4: enx0019fd4cb596: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 00:19:fd:4c:b5:96 brd ff:ff:ff:ff:ff:ff
inet 192.168.1.102/24 brd 192.168.1.255 scope global dynamic enx0019fd4cb596
valid_lft 84825sec preferred_lft 84825sec
inet6 fe80::7cd4:9a9d:23d0:1c1e/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 13156 164 0 0 0 0 0 0 13156 164 0 0 0 0 0 0
wlp1s0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
enx0019fd4cb596: 1432574 3746 0 0 0 0 0 0 844102 2838 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
3807 total packets received
10 with invalid addresses
0 forwarded
0 incoming packets discarded
3797 incoming packets delivered
3019 requests sent out
40 outgoing packets dropped
8 dropped because of missing route
Icmp:
418 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 80
echo requests: 338
418 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 80
echo replies: 338
IcmpMsg:
InType3: 80
InType8: 338
OutType0: 338
OutType3: 80
Tcp:
30 active connections openings
3 passive connection openings
0 failed connection attempts
0 connection resets received
2 connections established
2592 segments received
2258 segments send out
0 segments retransmited
0 bad segments received.
0 resets sent
Udp:
117 packets received
80 packets to unknown port received.
0 packet receive errors
200 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 8
UdpLite:
TcpExt:
6 TCP sockets finished time wait in fast timer
33 delayed acks sent
777 packet headers predicted
250 acknowledgments not containing data payload received
996 predicted acknowledgments
TCPRcvCoalesce: 719
TCPAutoCorking: 27
TCPOrigDataSent: 1638
IpExt:
InMcastPkts: 601
OutMcastPkts: 163
InBcastPkts: 8
InOctets: 1443486
OutOctets: 808242
InMcastOctets: 22188
OutMcastOctets: 7730
InBcastOctets: 1950
InNoECTPkts: 3807
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Braswell SoC Transaction Router [8086:2280] (rev 22)
Subsystem: ASUSTeK Computer Inc. Braswell SoC Transaction Router [1043:10b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: iosf_mbi_pci
00:02.0 VGA compatible controller [0300]: Intel Corporation Braswell PCI Configuration Registers [8086:22b0] (rev 22) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Braswell PCI Configuration Registers [1043:10b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 312
Region 0: Memory at 90000000 (64-bit, non-prefetchable) [size=16M]
Region 2: Memory at 80000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:0b.0 Signal processing controller [1180]: Intel Corporation Braswell P-Unit Power Management [8086:22dc] (rev 22)
Subsystem: ASUSTeK Computer Inc. Braswell P-Unit Power Management [1043:10b0]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 311
Region 0: Memory at 91639000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: proc_thermal
Kernel modules: processor_thermal_device
00:14.0 USB controller [0c03]: Intel Corporation Braswell USB xHCI Host Controller [8086:22b5] (rev 22) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Braswell USB xHCI Host Controller [1043:10b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 310
Region 0: Memory at 91600000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
Kernel modules: xhci_pci
00:1a.0 Encryption controller [1080]: Intel Corporation Braswell Trusted Execution Engine Interface [8086:2298] (rev 22)
Subsystem: ASUSTeK Computer Inc. Braswell Trusted Execution Engine Interface [1043:10b0]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 255
Region 0: Memory at 91500000 (32-bit, non-prefetchable) [size=1M]
Region 1: Memory at 91400000 (32-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation Braswell PCIe Port 1 [8086:22c8] (rev 22) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 309
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: 91200000-913fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1f.0 ISA bridge [0601]: Intel Corporation Braswell Platform Controller Unit LPC [8086:229c] (rev 22)
Subsystem: ASUSTeK Computer Inc. Braswell Platform Controller Unit LPC [1043:10b0]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
01:00.0 Network controller [0280]: Qualcomm Atheros QCA9377 802.11ac Wireless Network Adapter [168c:0042] (rev 30)
Subsystem: AzureWave QCA9377 802.11ac Wireless Network Adapter [1a3b:2b31]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 313
Region 0: Memory at 91200000 (64-bit, non-prefetchable) [size=2M]
Capabilities: <access denied>
Kernel driver in use: ath10k_pci
Kernel modules: ath10k_pci
** USB devices:
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 0b95:7720 ASIX Electronics Corp. AX88772
Bus 001 Device 003: ID 13d3:3496 IMC Networks
Bus 001 Device 002: ID 0bda:57ed Realtek Semiconductor Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.6.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.6.0-1-amd64 depends on:
ii initramfs-tools [linux-initramfs-tool] 0.125
ii kmod 22-1.1
ii linux-base 4.4
Versions of packages linux-image-4.6.0-1-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-4.6.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | grub-efi | extlinux <none>
pn linux-doc-4.6 <none>
Versions of packages linux-image-4.6.0-1-amd64 is related to:
pn firmware-amd-graphics <none>
ii firmware-atheros 20160110-1
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-cavium <none>
pn firmware-intel-sound <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux-nonfree <none>
pn firmware-misc-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-realtek <none>
pn firmware-samsung <none>
pn firmware-siano <none>
pn firmware-ti-connectivity <none>
pn xen-hypervisor <none>
-- no debconf information
Reply to: