Your message dated Thu, 05 May 2016 22:57:26 +0100 with message-id <1462485446.19332.4.camel@decadent.org.uk> and subject line Re: Bug#823551: linux-image-4.5.0-2-amd64: [graphdriver] prior storage driver "aufs" failed: driver not supported has caused the Debian Bug report #823551, regarding linux-image-4.5.0-2-amd64: [graphdriver] prior storage driver "aufs" failed: driver not supported to be marked as done. This means that you claim that the problem has been dealt with. If this is not the case it is now your responsibility to reopen the Bug report if necessary, and/or fix the problem forthwith. (NB: If you are a system administrator and have no idea what this message is talking about, this may indicate a serious mail system misconfiguration somewhere. Please contact owner@bugs.debian.org immediately.) -- 823551: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=823551 Debian Bug Tracking System Contact owner@bugs.debian.org with problems
--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-4.5.0-2-amd64: [graphdriver] prior storage driver "aufs" failed: driver not supported
- From: joblack <joblack@koeck.info>
- Date: Thu, 05 May 2016 23:15:42 +0200
- Message-id: <[🔎] 146248294219.4264.16836220938451708613.reportbug@koeck.info>
Package: src:linux Version: 4.5.2-1 Severity: normal Dear Maintainer, *** Reporter, please consider answering these questions, where appropriate *** Docker doesn't start because of missing aufs module root@koeck:/home/joblack# docker -d Warning: '-d' is deprecated, it will be removed soon. See usage. WARN[0000] please use 'docker daemon' instead. INFO[0000] Listening for HTTP on unix (/var/run/docker.sock) ERRO[0000] [graphdriver] prior storage driver "aufs" failed: driver not supported FATA[0000] Error starting daemon: error initializing graphdriver: driver not supported *** End of the template - remove these template lines *** -- Package-specific info: ** Version: Linux version 4.5.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160424 (Debian 5.3.1-16) ) #1 SMP Debian 4.5.2-1 (2016-04-28) ** Command line: BOOT_IMAGE=/vmlinuz-4.5.0-2-amd64 root=/dev/mapper/koeck--vg-root ro quiet ** Tainted: E (8192) * Unsigned module has been loaded (currently expected). ** Kernel log: [ 1.221592] usb usb1: Product: UHCI Host Controller [ 1.221593] usb usb1: Manufacturer: Linux 4.5.0-2-amd64 uhci_hcd [ 1.221594] usb usb1: SerialNumber: 0000:00:01.2 [ 1.221750] hub 1-0:1.0: USB hub found [ 1.221758] hub 1-0:1.0: 2 ports detected [ 1.255280] FDC 0 is a S82078B [ 1.255564] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input3 [ 1.431614] input: VirtualPS/2 VMware VMMouse as /devices/platform/i8042/serio1/input/input2 [ 1.466990] vda: vda1 vda2 < vda5 > [ 1.672686] device-mapper: uevent: version 1.0.3 [ 1.673103] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com [ 1.684118] usb 1-1: new full-speed USB device number 2 using uhci_hcd [ 1.944765] usb 1-1: New USB device found, idVendor=0627, idProduct=0001 [ 1.944773] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5 [ 1.944776] usb 1-1: Product: QEMU USB Tablet [ 1.944779] usb 1-1: Manufacturer: QEMU 1.0 [ 1.944782] usb 1-1: SerialNumber: 42 [ 1.957997] hidraw: raw HID events driver (C) Jiri Kosina [ 1.980179] usbcore: registered new interface driver usbhid [ 1.980183] usbhid: USB HID core driver [ 1.985869] input: QEMU 1.0 QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/0003:0627:0001.0001/input/input4 [ 1.986205] hid-generic 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Pointer [QEMU 1.0 QEMU USB Tablet] on usb-0000:00:01.2-1/input0 [ 2.000152] tsc: Refined TSC clocksource calibration: 2600.048 MHz [ 2.000160] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x257a69760b8, max_idle_ns: 440795224253 ns [ 18.371602] random: nonblocking pool is initialized [ 25.212977] NET: Registered protocol family 38 [ 44.451223] alg: No test for fips(ansi_cprng) (fips_ansi_cprng) [ 44.597240] PM: Starting manual resume from disk [ 44.597246] PM: Hibernation image partition 253:2 present [ 44.597247] PM: Looking for hibernation image. [ 44.597519] PM: Image not found (code -22) [ 44.597521] PM: Hibernation image not present or could not be loaded. [ 44.643922] SGI XFS with ACLs, security attributes, realtime, no debug enabled [ 44.678305] XFS (dm-1): Mounting V4 Filesystem [ 44.831575] XFS (dm-1): Ending clean mount [ 45.034134] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN) [ 45.034188] systemd[1]: Detected virtualization bochs. [ 45.034193] systemd[1]: Detected architecture x86-64. [ 45.035658] systemd[1]: Set hostname to <koeck>. [ 45.177169] systemd[1]: Listening on Device-mapper event daemon FIFOs. [ 45.177419] systemd[1]: Created slice System Slice. [ 45.177476] systemd[1]: Started Dispatch Password Requests to Console Directory Watch. [ 45.177518] systemd[1]: Listening on udev Kernel Socket. [ 45.177622] systemd[1]: Listening on Journal Audit Socket. [ 45.177661] systemd[1]: Listening on Syslog Socket. [ 45.177802] systemd[1]: Created slice system-systemd\x2dfsck.slice. [ 45.177816] systemd[1]: Reached target Remote File Systems (Pre). [ 45.177866] systemd[1]: Listening on udev Control Socket. [ 45.178043] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 45.178180] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice. [ 45.178221] systemd[1]: Listening on LVM2 poll daemon socket. [ 45.178245] systemd[1]: Listening on LVM2 metadata daemon socket. [ 45.178282] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ 45.178322] systemd[1]: Started Forward Password Requests to Wall Directory Watch. [ 45.178354] systemd[1]: Listening on Journal Socket (/dev/log). [ 45.178392] systemd[1]: Listening on Journal Socket. [ 45.188276] systemd[1]: Mounting Huge Pages File System... [ 45.189815] systemd[1]: Starting Load Kernel Modules... [ 45.190889] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling... [ 45.192835] systemd[1]: Starting Set the console keyboard layout... [ 45.194674] systemd[1]: Starting Journal Service... [ 45.196181] systemd[1]: Mounting POSIX Message Queue File System... [ 45.197713] systemd[1]: Starting Create list of required static device nodes for the current kernel... [ 45.198605] systemd[1]: Mounting Debug File System... [ 45.198709] systemd[1]: Listening on fsck to fsckd communication Socket. [ 45.198768] systemd[1]: Reached target Remote File Systems. [ 45.199013] systemd[1]: Created slice User and Session Slice. [ 45.199031] systemd[1]: Reached target Slices. [ 45.200442] systemd[1]: Starting Remount Root and Kernel File Systems... [ 45.208798] systemd[1]: Mounted Huge Pages File System. [ 45.213543] systemd[1]: Started Load Kernel Modules. [ 45.214544] systemd[1]: Started Create list of required static device nodes for the current kernel. [ 45.218145] systemd[1]: Started Remount Root and Kernel File Systems. [ 45.218767] systemd[1]: Mounted Debug File System. [ 45.223565] systemd[1]: Mounted POSIX Message Queue File System. [ 45.245735] systemd[1]: Started Journal Service. [ 45.314846] systemd-journald[276]: Received request to flush runtime journal from PID 1 [ 45.397827] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5 [ 45.397834] ACPI: Power Button [PWRF] [ 45.411428] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0xb100, revision 0 [ 45.432903] input: PC Speaker as /devices/platform/pcspkr/input/input6 [ 45.446586] [drm] Initialized drm 1.1.0 20060810 [ 45.496818] [TTM] Zone kernel: Available graphics memory: 6154068 kiB [ 45.496819] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 45.496819] [TTM] Initializing pool allocator [ 45.496824] [TTM] Initializing DMA pool allocator [ 45.497320] [drm] fb mappable at 0xFC000000 [ 45.497320] [drm] vram aper at 0xFC000000 [ 45.497321] [drm] size 33554432 [ 45.497321] [drm] fb depth is 24 [ 45.497322] [drm] pitch is 3072 [ 45.497353] ppdev: user-space parallel port driver [ 45.514182] fbcon: cirrusdrmfb (fb0) is primary device [ 45.518849] Adding 25165820k swap on /dev/mapper/koeck--vg-swap_1. Priority:-1 extents:1 across:25165820k FS [ 45.524047] pmd_set_huge: Cannot satisfy [mem 0xfc000000-0xfc200000] with a huge-page mapping due to MTRR override. [ 45.536335] Console: switching to colour frame buffer device 128x48 [ 45.547593] cirrus 0000:00:02.0: fb0: cirrusdrmfb frame buffer device [ 45.596061] [drm] Initialized cirrus 1.0.0 20110418 for 0000:00:02.0 on minor 0 [ 46.368549] EXT4-fs (vda1): mounting ext2 file system using the ext4 subsystem [ 46.370874] EXT4-fs (vda1): mounted filesystem without journal. Opts: (null) ** Model information sys_vendor: Bochs product_name: Bochs product_version: chassis_vendor: Bochs chassis_version: bios_vendor: Bochs bios_version: Bochs ** Loaded modules: ext4(E) ecb(E) lrw(E) glue_helper(E) ablk_helper(E) cryptd(E) aes_x86_64(E) crc16(E) mbcache(E) jbd2(E) kvm_intel(E) kvm(E) cirrus(E) ttm(E) ppdev(E) drm_kms_helper(E) drm(E) acpi_cpufreq(E) evdev(E) joydev(E) pcspkr(E) tpm_tis(E) tpm(E) serio_raw(E) parport_pc(E) parport(E) irqbypass(E) processor(E) virtio_balloon(E) i2c_piix4(E) 8250_fintek(E) button(E) autofs4(E) xfs(E) libcrc32c(E) crc32c_generic(E) hmac(E) drbg(E) ansi_cprng(E) xts(E) gf128mul(E) algif_skcipher(E) af_alg(E) hid_generic(E) usbhid(E) hid(E) dm_crypt(E) dm_mod(E) ata_generic(E) virtio_net(E) virtio_blk(E) uhci_hcd(E) ata_piix(E) ehci_hcd(E) libata(E) psmouse(E) virtio_pci(E) virtio_ring(E) usbcore(E) virtio(E) scsi_mod(E) usb_common(E) floppy(E) ** Network interface configuration: # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). source /etc/network/interfaces.d/* # The loopback network interface auto lo iface lo inet loopback # The primary network interface allow-hotplug eth0 iface eth0 inet static address 178.254.20.91 netmask 255.255.255.0 network 178.254.20.0 broadcast 178.254.20.255 gateway 178.254.20.1 # dns-* options are implemented by the resolvconf package, if installed dns-nameservers 178.254.16.141 178.254.16.151 dns-search info ** Network status: *** IP interfaces and addresses: 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000 link/ether 52:54:01:00:00:48 brd ff:ff:ff:ff:ff:ff inet 178.254.20.91/24 brd 178.254.20.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::5054:1ff:fe00:48/64 scope link valid_lft forever preferred_lft forever *** Device statistics: Inter-| Receive | Transmit face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed eth0: 3120238 39449 0 0 0 0 0 0 1683656 3443 0 0 0 0 0 0 lo: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 *** Protocol statistics: Ip: Forwarding: 2 5029 total packets received 2024 with invalid addresses 0 forwarded 0 incoming packets discarded 3004 incoming packets delivered 3433 requests sent out Icmp: 2 ICMP messages received 0 input ICMP message failed. ICMP input histogram: echo requests: 2 11 ICMP messages sent 0 ICMP messages failed ICMP output histogram: destination unreachable: 9 echo replies: 2 IcmpMsg: InType8: 2 OutType0: 2 OutType3: 9 Tcp: 13 active connections openings 2 passive connection openings 1 failed connection attempts 0 connection resets received 1 connections established 2849 segments received 3683 segments send out 29 segments retransmited 0 bad segments received. 18 resets sent Udp: 41 packets received 9 packets to unknown port received. 0 packet receive errors 44 packets sent 0 receive buffer errors 0 send buffer errors IgnoredMulti: 103 UdpLite: TcpExt: 1 resets received for embryonic SYN_RECV sockets 7 TCP sockets finished time wait in fast timer 30 delayed acks sent Quick ack mode was activated 5 times 2 packets directly queued to recvmsg prequeue. TCPDirectCopyFromPrequeue: 2 373 packet headers predicted 1010 acknowledgments not containing data payload received 82 predicted acknowledgments TCPSackRecovery: 3 2 congestion windows fully recovered without slow start TCPDSACKUndo: 1 3 fast retransmits TCPLossProbes: 26 TCPDSACKOldSent: 5 TCPDSACKRecv: 29 TCPDSACKIgnoredNoUndo: 12 TCPSackShiftFallback: 5 TCPRcvCoalesce: 116 TCPOFOQueue: 21 TCPOrigDataSent: 3356 TCPHystartDelayDetect: 1 TCPHystartDelayCwnd: 16 TCPACKSkippedSeq: 3 IpExt: InBcastPkts: 103 InOctets: 984590 OutOctets: 1634926 InBcastOctets: 21084 InNoECTPkts: 5035 InECT0Pkts: 1 ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000] Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Physical Slot: 1 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [Master]) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8] Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8] Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) Region 4: I/O ports at c0a0 [size=16] Kernel driver in use: ata_piix Kernel modules: ata_piix, ata_generic 00:01.2 USB controller [0c03]: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI]) Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100] Physical Slot: 1 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin D routed to IRQ 11 Region 4: I/O ports at c040 [size=32] Kernel driver in use: uhci_hcd Kernel modules: uhci_hcd 00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03) Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100] Physical Slot: 1 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 9 Kernel driver in use: piix4_smbus Kernel modules: i2c_piix4 00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller]) Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100] Physical Slot: 2 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at febf0000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at febd0000 [disabled] [size=64K] Kernel driver in use: cirrus Kernel modules: cirrusfb, cirrus 00:03.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000] Subsystem: Red Hat, Inc Virtio network device [1af4:0001] Physical Slot: 3 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at c060 [size=32] Region 1: Memory at febf1000 (32-bit, non-prefetchable) [size=4K] Expansion ROM at febe0000 [disabled] [size=64K] Capabilities: <access denied> Kernel driver in use: virtio-pci Kernel modules: virtio_pci 00:04.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001] Subsystem: Red Hat, Inc Virtio block device [1af4:0002] Physical Slot: 4 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 11 Region 0: I/O ports at c000 [size=64] Region 1: Memory at febf2000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: virtio-pci Kernel modules: virtio_pci 00:05.0 RAM memory [0500]: Red Hat, Inc Virtio memory balloon [1af4:1002] Subsystem: Red Hat, Inc Virtio memory balloon [1af4:0005] Physical Slot: 5 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 10 Region 0: I/O ports at c080 [size=32] Kernel driver in use: virtio-pci Kernel modules: virtio_pci ** USB devices: Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: stretch/sid APT prefers unstable APT policy: (500, 'unstable') Architecture: amd64 (x86_64) Kernel: Linux 4.5.0-2-amd64 (SMP w/4 CPU cores) Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.5.0-2-amd64 depends on: ii debconf [debconf-2.0] 1.5.59 ii initramfs-tools [linux-initramfs-tool] 0.125 ii kmod 22-1.1 ii linux-base 4.0 Versions of packages linux-image-4.5.0-2-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.1.0-2 Versions of packages linux-image-4.5.0-2-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-36 pn linux-doc-4.5 <none> Versions of packages linux-image-4.5.0-2-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> pn firmware-realtek <none> pn xen-hypervisor <none> -- debconf information: linux-image-4.5.0-2-amd64/prerm/removing-running-kernel-4.5.0-2-amd64: true
--- End Message ---
--- Begin Message ---
- To: 823551-done@bugs.debian.org
- Subject: Re: Bug#823551: linux-image-4.5.0-2-amd64: [graphdriver] prior storage driver "aufs" failed: driver not supported
- From: Ben Hutchings <ben@decadent.org.uk>
- Date: Thu, 05 May 2016 22:57:26 +0100
- Message-id: <1462485446.19332.4.camel@decadent.org.uk>
- In-reply-to: <[🔎] 146248294219.4264.16836220938451708613.reportbug@koeck.info>
- References: <[🔎] 146248294219.4264.16836220938451708613.reportbug@koeck.info>
On Thu, 2016-05-05 at 23:15 +0200, joblack wrote: > Package: src:linux > Version: 4.5.2-1 > Severity: normal > > Dear Maintainer, > > *** Reporter, please consider answering these questions, where appropriate *** > Docker doesn't start because of missing aufs module [...] aufs is not part of upstream Linux, and we have stopped adding it since overlayfs was included upstream. You should be able to configure Docker to use overlayfs, or else install aufs separately. Ben. -- Ben Hutchings All the simple programs have been written, and all the good names taken.Attachment: signature.asc
Description: This is a digitally signed message part
--- End Message ---