[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#728668: marked as done (linux-image-3.11-1-powerpc: nouveau kernel message every 10 seconds: E[ DRM] DDC responded, but no EDID for TV-1)

Your message dated Fri, 22 Apr 2016 11:41:15 +0200
with message-id <CA+7wUszHZzgKCpRrA+wC9Vc0fSgdokKcQd1WAkf1LLR=5=cTvQ@mail.gmail.com>
and subject line Re: Bug#728668: nouveau kernel message every 10 seconds: E[ DRM] DDC responded, but no EDID for TV-1
has caused the Debian Bug report #728668,
regarding linux-image-3.11-1-powerpc: nouveau kernel message every 10 seconds: E[ DRM] DDC responded, but no EDID for TV-1
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
728668: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=728668
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message --- 
Package: src:linux
Version: 3.11.6-2
Severity: normal

As you can see from the attached kernel log, the nouveau module is
reporting the same error message every 10 seconds.

This machine ("omega") is a 1GHz gooseneck powerpc G4 iMac.

I got the same error messages and behavior from 3.10-3-powerpc.

  --dkg


-- Package-specific info:
** Version:
Linux version 3.11-1-powerpc (debian-kernel@lists.debian.org) (gcc version 4.8.2 (Debian 4.8.2-1) ) #1 Debian 3.11.6-2 (2013-11-01)

** Command line:
BOOT_IMAGE=/boot/vmlinux-3.11-1-powerpc root=/dev/mapper/vg_omega0-root ro init=/bin/systemd quiet

** Not tainted

** Kernel log:
[    7.582461] ohci-pci 0001:10:18.0: new USB bus registered, assigned bus number 1
[    7.582529] ohci-pci 0001:10:18.0: irq 27, io mem 0x80082000
[    7.582795] Broadcom 43xx-legacy driver loaded [ Features: PLID ]
[    7.629639] Raw EDID:
[    7.629667]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    7.629677]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    7.629686]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    7.629694]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    7.629703]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    7.629712]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    7.629721]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    7.629730]  	00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[    7.629750] nouveau 0000:00:10.0: TV-1: EDID block 0 invalid.
[    7.629762] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[    7.657135] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[    7.657152] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.657158] usb usb1: Product: OHCI PCI host controller
[    7.657164] usb usb1: Manufacturer: Linux 3.11-1-powerpc ohci_hcd
[    7.657170] usb usb1: SerialNumber: 0001:10:18.0
[    7.657566] hub 1-0:1.0: USB hub found
[    7.657588] hub 1-0:1.0: 2 ports detected
[    7.657888] ohci-pci 0001:10:19.0: OHCI PCI host controller
[    7.657908] ohci-pci 0001:10:19.0: new USB bus registered, assigned bus number 2
[    7.657969] ohci-pci 0001:10:19.0: irq 28, io mem 0x80081000
[    7.741352] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    7.741370] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.741376] usb usb2: Product: OHCI PCI host controller
[    7.741382] usb usb2: Manufacturer: Linux 3.11-1-powerpc ohci_hcd
[    7.741388] usb usb2: SerialNumber: 0001:10:19.0
[    7.741780] hub 2-0:1.0: USB hub found
[    7.741802] hub 2-0:1.0: 2 ports detected
[    7.744343] ohci-pci 0001:10:1a.0: OHCI PCI host controller
[    7.744373] ohci-pci 0001:10:1a.0: new USB bus registered, assigned bus number 3
[    7.744433] ohci-pci 0001:10:1a.0: irq 29, io mem 0x80080000
[    7.754878] nouveau  [     DRM] allocated 1440x900 fb: 0x9000, bo efbca800
[    7.855517] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[    7.855523] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.855526] usb usb3: Product: OHCI PCI host controller
[    7.855530] usb usb3: Manufacturer: Linux 3.11-1-powerpc ohci_hcd
[    7.855534] usb usb3: SerialNumber: 0001:10:1a.0
[    7.858241] hub 3-0:1.0: USB hub found
[    7.858262] hub 3-0:1.0: 2 ports detected
[    7.885128] nouveau E[     DRM] Pixel clock comparison table not found
[    8.056740] Console: switching to colour frame buffer device 180x56
[    8.059488] nouveau 0000:00:10.0: fb0: nouveaufb frame buffer device
[    8.059495] nouveau 0000:00:10.0: registered panic notifier
[    8.059987] [drm] Initialized nouveau 1.1.1 20120801 for 0000:00:10.0 on minor 0
[    8.073018] usb 1-2: new low-speed USB device number 2 using ohci-pci
[    8.264418] b43legacy ssb0:0: firmware: agent aborted loading b43legacy/ucode4.fw (not found?)
[    8.264652] b43legacy-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware (version 3).
[    8.267190] usb 1-2: New USB device found, idVendor=1241, idProduct=1603
[    8.267207] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.267213] usb 1-2: Product: USB Keyboard
[    8.267219] usb 1-2: Manufacturer:  
[    8.451273] hidraw: raw HID events driver (C) Jiri Kosina
[    8.508850] usbcore: registered new interface driver usbhid
[    8.508868] usbhid: USB HID core driver
[    8.599782] input:   USB Keyboard as /devices/pci0001:10/0001:10:18.0/usb1/1-2/1-2:1.0/input/input1
[    8.600606] hid-generic 0003:1241:1603.0001: input,hidraw0: USB HID v1.10 Keyboard [  USB Keyboard] on usb-0001:10:18.0-2/input0
[    8.606478] input:   USB Keyboard as /devices/pci0001:10/0001:10:18.0/usb1/1-2/1-2:1.1/input/input2
[    8.610631] hid-generic 0003:1241:1603.0002: input,hidraw1: USB HID v1.10 Device [  USB Keyboard] on usb-0001:10:18.0-2/input1
[    9.125058] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[   12.593276] sungem_phy: PHY ID: 4061e4, addr: 0
[   12.593640] gem 0002:20:0f.0 eth0: Found BCM5221 PHY
[   12.594035] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   15.001067] gem 0002:20:0f.0 eth0: Link is up at 100 Mbps, full-duplex
[   15.001197] gem 0002:20:0f.0 eth0: Pause is disabled
[   15.001242] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   17.566762] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[   27.614586] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[   37.662605] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[   47.710583] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[   57.758695] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[   67.806703] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[   77.854753] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[   87.902640] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[   97.950686] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  107.998606] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  118.046595] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  128.094615] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  138.142584] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  148.190584] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  158.238621] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  168.286581] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  178.334592] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  188.382711] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  198.430626] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  208.478596] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  218.526589] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  228.574601] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  238.623269] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  248.671140] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  258.718671] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  268.798571] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  278.846585] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  288.894601] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  298.942599] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  308.990639] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  319.038615] nouveau E[     DRM] DDC responded, but no EDID for TV-1
[  329.086576] nouveau E[     DRM] DDC responded, but no EDID for TV-1

** Model information
revision	: 3.3 (pvr 8001 0303)
platform	: PowerMac
model		: PowerMac6,1
machine		: PowerMac6,1
motherboard	: PowerMac6,1 MacRISC3 Power Macintosh

** Loaded modules:
hfs
hid_generic
usbhid
hid
evdev
ohci_pci
ohci_hcd
ehci_hcd
b43legacy
nouveau
mac80211
ttm
usbcore
cfg80211
rfkill
rng_core
drm_kms_helper
usb_common
drm
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
sg
firewire_ohci
sungem
sd_mod
firewire_core
crc_itu_t
sungem_phy
crc_t10dif
sr_mod
cdrom
ssb
mmc_core
pcmcia
pcmcia_core

** PCI devices:
not available

** USB devices:
not available


-- System Information:
Debian Release: jessie/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: powerpc (ppc)

Kernel: Linux 3.11-1-powerpc
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash

Versions of packages linux-image-3.11-1-powerpc depends on:
ii  debconf [debconf-2.0]                   1.5.52
ii  initramfs-tools [linux-initramfs-tool]  0.114
ii  kmod                                    9-3
ii  linux-base                              3.5

Versions of packages linux-image-3.11-1-powerpc recommends:
ii  firmware-linux-free  3.2

Versions of packages linux-image-3.11-1-powerpc suggests:
pn  debian-kernel-handbook  <none>
pn  linux-doc-3.11          <none>
pn  mkvmlinuz               <none>

Versions of packages linux-image-3.11-1-powerpc is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.11-1-powerpc/prerm/removing-running-kernel-3.11-1-powerpc: true
  linux-image-3.11-1-powerpc/postinst/depmod-error-initrd-3.11-1-powerpc: false

--- End Message ---
--- Begin Message --- 
tags 728668 wontfix

On Tue, Apr 12, 2016 at 6:15 PM, Daniel Kahn Gillmor
<dkg@fifthhorseman.net> wrote:
> On Tue 2016-04-12 05:12:13 -0400, Mathieu Malaterre wrote about
> https://bugs.debian.org/728668:
>> Is this bug still accurate with current debian kernel ?
>
> sorry, i don't currently have access to that machine, so i don't have
> that information :(

Ok. Closing then. Thanks.

--- End Message ---
Reply to: