[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#822112: linux-image-4.5.0-1-686: [i686/GeodeLX] kernel 3.16 to 4.5 breaks X



Package: src:linux
Version: 4.5.1-1
Severity: important

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256

On this host, booting Xorg via GDM3 fails since kernel 4 entered testing.

However, the exact same Xorg succesfully launches under kernel 3.16.

dmesg and Xorg.log under both kernels are attached.

- -- Package-specific info:
** Kernel log: boot messages should be attached

** Model information

** Network interface configuration:
auto lo
iface lo inet loopback



** PCI devices:
00:01.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] Host Bridge [1022:2080] (rev 31)
	Subsystem: FIRST INTERNATIONAL Computer Inc CS5536 [Geode companion] Host Bridge [1509:801b]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 248, Cache Line Size: 32 bytes
	Region 0: I/O ports at ac1c [size=4]
	Region 1: I/O ports at 9e00 [size=8]

00:01.1 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD] Geode LX Video [1022:2081] (prog-if 00 [VGA controller])
	Subsystem: FIRST INTERNATIONAL Computer Inc Geode LX Video [1509:801b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=256M]
	Region 1: Memory at efff0000 (32-bit, non-prefetchable) [size=16K]
	Region 2: Memory at effec000 (32-bit, non-prefetchable) [size=16K]
	Region 3: Memory at effe8000 (32-bit, non-prefetchable) [size=16K]
	Region 4: Memory at efff8000 (32-bit, non-prefetchable) [size=16K]
	Expansion ROM at <unassigned> [disabled]
	Kernel modules: lxfb

00:01.2 Entertainment encryption device [1010]: Advanced Micro Devices, Inc. [AMD] Geode LX AES Security Block [1022:2082]
	Subsystem: FIRST INTERNATIONAL Computer Inc Geode LX AES Security Block [1509:801b]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin A routed to IRQ 10
	Region 0: Memory at efff4000 (32-bit, non-prefetchable) [size=16K]
	Kernel driver in use: Geode LX AES
	Kernel modules: geode_rng, geode_aes

00:0d.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [10ec:8139] (rev 10)
	Subsystem: FIRST INTERNATIONAL Computer Inc RTL-8100/8101L/8139 PCI Fast Ethernet Adapter [1509:801b]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
	Latency: 32 (8000ns min, 16000ns max)
	Interrupt: pin A routed to IRQ 11
	Region 0: I/O ports at fc00 [size=256]
	Region 1: Memory at effff000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: 8139too
	Kernel modules: 8139cp, 8139too

00:0f.0 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] ISA [1022:2090] (rev 03)
	Subsystem: FIRST INTERNATIONAL Computer Inc CS5536 [Geode companion] ISA [1509:801b]
	Control: I/O+ Mem- BusMaster- SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Region 0: I/O ports at 6000 [size=8]
	Region 1: I/O ports at 6100 [size=256]
	Region 2: I/O ports at 6200 [size=64]
	Region 3: I/O ports at 1000 [size=32]
	Region 4: I/O ports at 9d00 [size=128]
	Region 5: I/O ports at 9c00 [size=64]
	Kernel modules: cs5535_mfd

00:0f.2 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] IDE [1022:209a] (rev 01) (prog-if 80 [Master])
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 248, Cache Line Size: 32 bytes
	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
	Region 4: I/O ports at ff00 [size=16]
	Kernel driver in use: pata_cs5536
	Kernel modules: pata_amd, pata_cs5536, ata_generic

00:0f.3 Multimedia audio controller [0401]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] Audio [1022:2093] (rev 01)
	Subsystem: FIRST INTERNATIONAL Computer Inc CS5536 [Geode companion] Audio [1509:801b]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin B routed to IRQ 11
	Region 0: I/O ports at fe00 [size=128]
	Kernel driver in use: snd_cs5535audio
	Kernel modules: snd_cs5535audio

00:0f.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] OHC [1022:2094] (rev 02) (prog-if 10 [OHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin D routed to IRQ 11
	Region 0: Memory at efffe000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:0f.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD] CS5536 [Geode companion] EHC [1022:2095] (rev 02) (prog-if 20 [EHCI])
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 32 bytes
	Interrupt: pin D routed to IRQ 11
	Region 0: Memory at efffd000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci


** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 002: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


- -- System Information:
Debian Release: stretch/sid
  APT prefers testing
  APT policy: (1001, 'testing'), (1001, 'stable')
Architecture: i386 (i586)

Kernel: Linux 3.16.0-4-586
Locale: LANG=fi_FI.UTF-8, LC_CTYPE=fi_FI.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.5.0-1-686 depends on:
ii  debconf [debconf-2.0]                   1.5.59
ii  initramfs-tools [linux-initramfs-tool]  0.123
ii  kmod                                    22-1.1
ii  linux-base                              4.0

Versions of packages linux-image-4.5.0-1-686 recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2
ii  libc6-i686           2.22-6

Versions of packages linux-image-4.5.0-1-686 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-36
pn  linux-doc-4.5           <none>

Versions of packages linux-image-4.5.0-1-686 is related to:
pn  firmware-atheros                         <none>
pn  firmware-bnx2                            <none>
pn  firmware-bnx2x                           <none>
pn  firmware-brcm80211                       <none>
pn  firmware-intelwimax                      <none>
pn  firmware-ipw2x00                         <none>
pn  firmware-ivtv                            <none>
ii  firmware-iwlwifi                         20160110-1
pn  firmware-libertas                        <none>
ii  firmware-linux                           20160110-1
ii  firmware-linux-nonfree                   20160110-1
ii  firmware-misc-nonfree [firmware-ralink]  20160110-1
pn  firmware-myricom                         <none>
pn  firmware-netxen                          <none>
pn  firmware-qlogic                          <none>
pn  firmware-realtek                         <none>
pn  xen-hypervisor                           <none>

- -- debconf information:
  linux-image-4.5.0-1-686/prerm/removing-running-kernel-4.5.0-1-686: true

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=chib
-----END PGP SIGNATURE-----
[    0.000000] Linux version 4.5.0-1-686 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160409 (Debian 5.3.1-14) ) #1 SMP Debian 4.5.1-1 (2016-04-14)
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037faffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000037fb0000-0x0000000037fb2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000037fb3000-0x0000000037fbffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.2 present.
[    0.000000] DMI: First International Computer, Inc.  ION603/ION603, BIOS 6.00 PG 11/08/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x37fb0 max_arch_pfn = 0x100000
[    0.000000] MTRR: Disabled
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] BRK [0x01897000, 0x01897fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x34870000-0x3642ffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5910 000014 (v00 AMDGX3)
[    0.000000] ACPI: RSDT 0x0000000037FB3000 000028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 0x0000000037FB3080 000074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20160108/tbfadt-704)
[    0.000000] ACPI: DSDT 0x0000000037FB3100 001581 (v01 AMDGX3 AWRDACPI 00001017 MSFT 03000000)
[    0.000000] ACPI: FACS 0x0000000037FB0000 000040
[    0.000000] 7MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000377fdfff]
[    0.000000]   HighMem  [mem 0x00000000377fe000-0x0000000037faffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009dfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000037faffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000037faffff]
[    0.000000] On node 0 totalpages: 229197
[    0.000000] free_area_init_node: node 0, pgdat c1756200, node_mem_map f701e024
[    0.000000]   DMA zone: 36 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   Normal zone: 1962 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 1970 pages, LIFO batch:0
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x9c10
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] No local APIC present or hardware disabled
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x37fc0000-0xfffeffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] PERCPU: Embedded 17 pages/cpu @f7007000 s40140 r0 d29492 u69632
[    0.000000] pcpu-alloc: s40140 r0 d29492 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227199
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-1-686 root=UUID=97b2628b-28a5-49f2-85f7-495728b3bef8 ro panic=15 pnpbios=off quiet splash cs5535audio.ac97_quirk=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:00037fb0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 870540K/916788K available (5385K kernel code, 618K rwdata, 1588K rodata, 668K init, 468K bss, 46248K reserved, 0K cma-reserved, 7880K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
                   pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
                   vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
                     .init : 0xc176d000 - 0xc1814000   ( 668 kB)
                     .data : 0xc15429e2 - 0xc176bac0   (2212 kB)
                     .text : 0xc1000000 - 0xc15429e2   (5386 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 32.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=1.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] NR_IRQS:2304 nr_irqs:32 16
[    0.000000] CPU 0 irqstacks, hard=f682c000 soft=f682e000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 498.075 MHz processor
[    0.008031] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.15 BogoMIPS (lpj=1992300)
[    0.008055] pid_max: default: 32768 minimum: 301
[    0.008157] ACPI: Core revision 20160108
[    0.020505] ACPI: 1 ACPI AML tables successfully acquired and loaded

[    0.020542] ACPI: setting ELCR to 0200 (from 0c20)
[    0.020727] Security Framework initialized
[    0.020743] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.020786] AppArmor: AppArmor disabled by boot time parameter
[    0.020875] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.020894] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.022597] Disabling memory control group subsystem
[    0.022777] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.022794] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.040466] Freeing SMP alternatives memory: 24K (c1814000 - c181a000)
[    0.051135] ftrace: allocating 22653 entries in 45 pages
[    0.104335] smpboot: weird, boot CPU (#0) not listed by the BIOS
[    0.104350] smpboot: SMP motherboard not detected
[    0.104360] smpboot: SMP disabled
[    0.104372] smpboot: Local APIC not detected. Using dummy APIC emulation.
[    0.104487] Performance Events: no PMU driver, software events only.
[    0.110343] x86: Booted up 1 node, 1 CPUs
[    0.110365] smpboot: Total of 1 processors activated (996.15 BogoMIPS)
[    0.110720] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.110734] NMI watchdog: Shutting down hard lockup detector on all cpus
[    0.111052] devtmpfs: initialized
[    0.113127] PM: Registering ACPI NVS region [mem 0x37fb0000-0x37fb2fff] (12288 bytes)
[    0.113745] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.114044] pinctrl core: initialized pinctrl subsystem
[    0.115175] NET: Registered protocol family 16
[    0.116575] cpuidle: using governor ladder
[    0.116598] cpuidle: using governor menu
[    0.116916] clocksource: pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1601818034827 ns
[    0.117271] ACPI: bus type PCI registered
[    0.117287] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.122162] PCI: PCI BIOS revision 2.10 entry at 0xfad30, last bus=0
[    0.122175] PCI: Using configuration type 1 for base access
[    0.130659] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    0.132853] ACPI: Added _OSI(Module Device)
[    0.132872] ACPI: Added _OSI(Processor Device)
[    0.132886] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.132900] ACPI: Added _OSI(Processor Aggregator Device)
[    0.146778] ACPI: Interpreter enabled
[    0.146922] ACPI: (supports S0 S1 S5)
[    0.146934] ACPI: Using PIC for interrupt routing
[    0.147077] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.165489] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.165530] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.165568] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.165596] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.165920] acpi PNP0A03:00: host bridge window [io  0x0cf8-0x0cff] (ignored)
[    0.165943] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7 window] (ignored)
[    0.165964] acpi PNP0A03:00: host bridge window [io  0x0d00-0xac17 window] (ignored)
[    0.165985] acpi PNP0A03:00: host bridge window [io  0xac20-0xffff window] (ignored)
[    0.166007] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
[    0.166028] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff window] (ignored)
[    0.166050] acpi PNP0A03:00: host bridge window [mem 0x40500000-0xfebfffff window] (ignored)
[    0.166063] PCI: root bus 00: using default resources
[    0.167102] PCI host bridge to bus 0000:00
[    0.167125] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.167147] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.167169] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.167312] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[    0.167466] pci 0000:00:01.0: reg 0x10: [io  0xac1c-0xac1f]
[    0.167582] pci 0000:00:01.0: reg 0x14: [io  0x9e00-0x9e07]
[    0.168958] pci 0000:00:01.1: [1022:2081] type 00 class 0x030000
[    0.169263] pci 0000:00:01.1: reg 0x10: [mem 0xd0000000-0xdfffffff]
[    0.169481] pci 0000:00:01.1: reg 0x14: [mem 0xefff0000-0xefff3fff]
[    0.169698] pci 0000:00:01.1: reg 0x18: [mem 0xeffec000-0xeffeffff]
[    0.169916] pci 0000:00:01.1: reg 0x1c: [mem 0xeffe8000-0xeffebfff]
[    0.170133] pci 0000:00:01.1: reg 0x20: [mem 0xefff8000-0xefffbfff]
[    0.171390] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[    0.171653] pci 0000:00:01.2: reg 0x10: [mem 0xefff4000-0xefff7fff]
[    0.173551] pci 0000:00:0d.0: [10ec:8139] type 00 class 0x020000
[    0.173593] pci 0000:00:0d.0: reg 0x10: [io  0xfc00-0xfcff]
[    0.173625] pci 0000:00:0d.0: reg 0x14: [mem 0xeffff000-0xeffff0ff]
[    0.173742] pci 0000:00:0d.0: supports D1 D2
[    0.173762] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
[    0.173978] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.174532] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[    0.174854] pci 0000:00:0f.0: reg 0x10: [io  0x6000-0x6007]
[    0.175121] pci 0000:00:0f.0: reg 0x14: [io  0x6100-0x61ff]
[    0.175388] pci 0000:00:0f.0: reg 0x18: [io  0x6200-0x623f]
[    0.175655] pci 0000:00:0f.0: reg 0x1c: [io  0x0000-0x001f]
[    0.175928] pci 0000:00:0f.0: reg 0x20: [io  0x9d00-0x9d7f]
[    0.176200] pci 0000:00:0f.0: reg 0x24: [io  0x9c00-0x9c3f]
[    0.177352] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[    0.178330] pci 0000:00:0f.2: reg 0x20: [io  0xff00-0xff0f]
[    0.178774] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.178793] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.178814] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.178833] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.179661] pci 0000:00:0f.3: [1022:2093] type 00 class 0x040100
[    0.180024] pci 0000:00:0f.3: reg 0x10: [io  0xfe00-0xfe7f]
[    0.181933] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[    0.182324] pci 0000:00:0f.4: reg 0x10: [mem 0xefffe000-0xefffefff]
[    0.183949] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[    0.184309] pci 0000:00:0f.4: System wakeup disabled by ACPI
[    0.184912] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[    0.185256] pci 0000:00:0f.5: reg 0x10: [mem 0xefffd000-0xefffdfff]
[    0.186866] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[    0.187191] pci 0000:00:0f.5: System wakeup disabled by ACPI
[    0.187713] pci_bus 0000:00: on NUMA node 0
[    0.189199] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.190196] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[    0.191025] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled.
[    0.192048] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[    0.194264] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.195243] vgaarb: setting as boot device: PCI:0000:00:01.1
[    0.195263] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[    0.195283] vgaarb: loaded
[    0.195297] vgaarb: bridge control possible 0000:00:01.1
[    0.196089] PCI: Using ACPI for IRQ routing
[    0.196106] PCI: pci_cache_line_size set to 32 bytes
[    0.196563] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.196580] e820: reserve RAM buffer [mem 0x37fb0000-0x37ffffff]
[    0.198189] clocksource: Switched to clocksource pit
[    0.264299] VFS: Disk quotas dquot_6.6.0
[    0.264404] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.265323] pnp: PnP ACPI init
[    0.266429] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.266456] system 00:00: [mem 0x37fb0000-0x37fbffff] could not be reserved
[    0.266480] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[    0.266504] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.266528] system 00:00: [mem 0x00100000-0x37faffff] could not be reserved
[    0.266551] system 00:00: [mem 0x40400000-0x4043ffff] has been reserved
[    0.266574] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.266605] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.268209] pnp 00:01: disabling [io  0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io  0x0000-0x001f]
[    0.268537] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.268566] system 00:01: [io  0x0480-0x048f] has been reserved
[    0.268594] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.268917] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.268976] pnp: PnP ACPI: found 3 devices
[    0.269000] PnPBIOS: Disabled
[    0.321616] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.321690] clocksource: Switched to clocksource acpi_pm
[    0.321767] pci 0000:00:0f.0: BAR 3: assigned [io  0x1000-0x101f]
[    0.321922] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.321944] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.322175] NET: Registered protocol family 2
[    0.323329] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.323502] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[    0.323715] TCP: Hash tables configured (established 8192 bind 8192)
[    0.323907] UDP hash table entries: 512 (order: 2, 16384 bytes)
[    0.323963] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[    0.324308] NET: Registered protocol family 1
[    0.324477] pci 0000:00:01.1: Video device with shadowed ROM
[    0.327131] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
[    0.327148] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.327161] PCI: setting IRQ 11 as level-triggered
[    0.397097] PCI: CLS 32 bytes, default 32
[    0.397443] Unpacking initramfs...
[    5.416982] Freeing initrd memory: 28416K (f4870000 - f6430000)
[    5.418200] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x1d5000 bytes, mapped to 0xf8200000
[    5.418227] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=800x600x32, linelength=3200
[    5.446237] Console: switching to colour frame buffer device 100x37
[    5.473132] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    5.488767] futex hash table entries: 256 (order: 2, 16384 bytes)
[    5.488917] audit: initializing netlink subsys (disabled)
[    5.489008] audit: type=2000 audit(1461233625.485:1): initialized
[    5.490270] Initialise system trusted keyring
[    5.490951] zbud: loaded
[    5.496900] Key type asymmetric registered
[    5.496929] Asymmetric key parser 'x509' registered
[    5.497103] bounce: pool size: 64 pages
[    5.497223] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    5.497418] io scheduler noop registered
[    5.497443] io scheduler deadline registered
[    5.497533] io scheduler cfq registered (default)
[    5.498253] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    5.498335] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    5.498646] GHES: HEST is not enabled!
[    5.498836] isapnp: Scanning for PnP cards...
[    5.854593] isapnp: No Plug & Play device found
[    5.854984] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.858180] Linux agpgart interface v0.103
[    5.859394] Failed to find cpu0 device node
[    5.859787] Unable to detect cache hierarchy from DT for CPU 0
[    5.860413] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    6.738008] i8042: Can't read CTR while initializing i8042
[    6.738540] tsc: Refined TSC clocksource calibration: 498.050 MHz
[    6.738564] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xe5bb2e969b, max_idle_ns: 881590439220 ns
[    6.738621] clocksource: Switched to clocksource tsc
[    6.738656] i8042: probe of i8042 failed with error -5
[    6.739441] mousedev: PS/2 mouse device common for all mice
[    6.740494] rtc_cmos 00:02: RTC can wake from S4
[    6.741122] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    6.741191] rtc_cmos 00:02: alarms up to one day, 242 bytes nvram
[    6.741400] ledtrig-cpu: registered to indicate activity on CPUs
[    6.744220] NET: Registered protocol family 10
[    6.745437] mip6: Mobile IPv6
[    6.745464] NET: Registered protocol family 17
[    6.745500] mpls_gso: MPLS GSO support
[    6.745533] mce: Unable to init device /dev/mcelog (rc: -5)
[    6.746358] microcode: AMD CPU family 0x5 not supported
[    6.746430] Using IPI No-Shortcut mode
[    6.747718] registered taskstats version 1
[    6.747807] Loading compiled-in X.509 certificates
[    6.760776] Loaded X.509 cert 'Debian Project: Ben Hutchings: 008a018dca80932630'
[    6.760885] zswap: loaded using pool lzo/zbud
[    6.762652] rtc_cmos 00:02: setting system clock to 2016-04-21 10:13:47 UTC (1461233627)
[    6.763084] PM: Hibernation image not present or could not be loaded.
[    6.764364] Freeing unused kernel memory: 668K (c176d000 - c1814000)
[    6.764622] Write protecting the kernel text: 5388k
[    6.764904] Write protecting the kernel read-only data: 1592k
[    7.922772] random: systemd-udevd urandom read with 27 bits of entropy available
[    8.079234] button: module verification failed: signature and/or required key missing - tainting kernel
[    8.089031] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    8.089063] ACPI: Power Button [PWRB]
[    8.089601] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    8.089623] ACPI: Sleep Button [SLPB]
[    8.090174] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    8.090195] ACPI: Power Button [PWRF]
[    8.179673] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    8.179708] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    8.195153] 8139too: 8139too Fast Ethernet driver 0.9.28
[    8.227723] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    8.236462] 8139too 0000:00:0d.0 eth0: RealTek RTL8139 at 0x0001fc00, 00:40:ca:9d:f0:50, IRQ 11
[    8.257300] SCSI subsystem initialized
[    8.266796] ACPI: bus type USB registered
[    8.267071] usbcore: registered new interface driver usbfs
[    8.267195] usbcore: registered new interface driver hub
[    8.268304] usbcore: registered new device driver usb
[    8.278405] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    8.286064] ehci-pci: EHCI PCI platform driver
[    8.286718] ehci-pci 0000:00:0f.5: EHCI Host Controller
[    8.286777] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
[    8.287101] ehci-pci 0000:00:0f.5: irq 11, io mem 0xefffd000
[    8.294124] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    8.297668] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[    8.298002] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    8.298024] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.298043] usb usb1: Product: EHCI Host Controller
[    8.298062] usb usb1: Manufacturer: Linux 4.5.0-1-686 ehci_hcd
[    8.298080] usb usb1: SerialNumber: 0000:00:0f.5
[    8.306830] hub 1-0:1.0: USB hub found
[    8.306894] hub 1-0:1.0: 4 ports detected
[    8.313937] ohci-pci: OHCI PCI platform driver
[    8.314556] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[    8.314604] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
[    8.314731] ohci-pci 0000:00:0f.4: irq 11, io mem 0xefffe000
[    8.325588] libata version 3.00 loaded.
[    8.380188] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    8.380216] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    8.380235] usb usb2: Product: OHCI PCI host controller
[    8.380254] usb usb2: Manufacturer: Linux 4.5.0-1-686 ohci_hcd
[    8.380272] usb usb2: SerialNumber: 0000:00:0f.4
[    8.383780] hub 2-0:1.0: USB hub found
[    8.383864] hub 2-0:1.0: 4 ports detected
[    8.398664] scsi host0: pata_cs5536
[    8.404246] scsi host1: pata_cs5536
[    8.404868] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    8.404883] ata2: DUMMY
[    8.563616] ata1.00: ATA-7: FUJITSU MHW2040AT, 0000000B, max UDMA/100
[    8.563641] ata1.00: 78140160 sectors, multi 16: LBA 
[    8.569183] ata1.00: configured for UDMA/100
[    8.573255] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2040A 000B PQ: 0 ANSI: 5
[    8.619572] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.3 GiB)
[    8.619881] sd 0:0:0:0: [sda] Write Protect is off
[    8.619907] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.620149] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.727249]  sda: sda1 sda2 < sda5 >
[    8.732736] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.872115] usb 2-3: new low-speed USB device number 2 using ohci-pci
[    9.081223] usb 2-3: New USB device found, idVendor=046d, idProduct=c00e
[    9.081251] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    9.081270] usb 2-3: Product: USB-PS/2 Optical Mouse
[    9.081289] usb 2-3: Manufacturer: Logitech
[    9.106356] hidraw: raw HID events driver (C) Jiri Kosina
[    9.120430] usbcore: registered new interface driver usbhid
[    9.120450] usbhid: USB HID core driver
[    9.132897] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0f.4/usb2/2-3/2-3:1.0/0003:046D:C00E.0001/input/input3
[    9.135090] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0f.4-3/input0
[   17.669100] PM: Starting manual resume from disk
[   17.669132] PM: Hibernation image partition 8:5 present
[   17.669145] PM: Looking for hibernation image.
[   17.726189] PM: Image not found (code -22)
[   17.726209] PM: Hibernation image not present or could not be loaded.
[   17.903635] random: nonblocking pool is initialized
[   22.817503] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   25.376232] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   25.377198] systemd[1]: Detected architecture x86.
[   25.405117] systemd[1]: Set hostname to <geode>.
[   32.550879] systemd[1]: Created slice User and Session Slice.
[   32.556540] systemd[1]: Created slice System Slice.
[   32.556917] systemd[1]: Listening on fsck to fsckd communication Socket.
[   32.557631] systemd[1]: Listening on Journal Audit Socket.
[   32.558741] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   32.559026] systemd[1]: Listening on udev Kernel Socket.
[   32.559345] systemd[1]: Listening on udev Control Socket.
[   32.559708] systemd[1]: Listening on Journal Socket (/dev/log).
[   32.559973] systemd[1]: Listening on Syslog Socket.
[   32.564508] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   32.564673] systemd[1]: Reached target Slices.
[   32.565076] systemd[1]: Listening on Journal Socket.
[   32.573387] systemd[1]: Mounting POSIX Message Queue File System...
[   32.587167] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   32.605138] systemd[1]: Starting Remount Root and Kernel File Systems...
[   32.650279] systemd[1]: Starting Journal Service...
[   32.655818] systemd[1]: Mounting Debug File System...
[   32.693178] systemd[1]: Reached target Remote File Systems (Pre).
[   32.693516] systemd[1]: Reached target Remote File Systems.
[   32.878215] systemd[1]: Starting Load Kernel Modules...
[   32.894644] systemd[1]: Mounting Huge Pages File System...
[   32.907718] systemd[1]: Starting Set the console keyboard layout...
[   32.907915] systemd[1]: Reached target System Time Synchronized.
[   32.952630] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   32.990409] systemd[1]: Reached target Encrypted Volumes.
[   32.990617] systemd[1]: Reached target User and Group Name Lookups.
[   33.205692] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   33.497042] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   33.551060] systemd[1]: Mounted Debug File System.
[   33.552009] systemd[1]: Mounted Huge Pages File System.
[   33.557009] systemd[1]: Mounted POSIX Message Queue File System.
[   33.600527] systemd[1]: Started Remount Root and Kernel File Systems.
[   33.846241] lp: driver loaded but no devices found
[   33.890011] ppdev: user-space parallel port driver
[   34.288234] Key type encrypted registered
[   34.371403] systemd[1]: Started Journal Service.
[   38.191670] systemd-journald[168]: Received request to flush runtime journal from PID 1
[   42.053130] ACPI: AC Adapter [AC] (on-line)
[   42.413370] ACPI Warning: SystemIO range 0x0000000000006100-0x00000000000061FF conflicts with OpRegion 0x0000000000006100-0x00000000000061FF (\_SB.GPIO) (20160108/utaddress-255)
[   42.413420] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   42.413595] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
[   42.414188] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
[   42.655625] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   42.698620] AMD Geode RNG detected
[   42.826035] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[   42.826056] PCI: setting IRQ 10 as level-triggered
[   43.068249] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[   46.507633] Adding 1646624k swap on /dev/sda5.  Priority:-1 extents:1 across:1646624k FS
[   66.091721] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[   66.093185] 8139too 0000:00:0d.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  116.913187] x86/PAT: Xorg:998 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  116.913723] ------------[ cut here ]------------
[  116.913761] WARNING: CPU: 0 PID: 998 at /build/linux-Efn4pv/linux-4.5.1/arch/x86/mm/pat.c:986 untrack_pfn+0xbf/0xd0()
[  116.913773] Modules linked in: cpufreq_conservative(E) cpufreq_userspace(E) cpufreq_powersave(E) cpufreq_stats(E) scx200_acb(E) ecb(E) snd_cs5535audio(E) snd_ac97_codec(E) geode_aes(E) geode_rng(E) sg(E) rng_core(E) snd_pcm(E) snd_timer(E) snd(E) soundcore(E) ac97_bus(E) cs5535_mfd(E) acpi_cpufreq(E) tpm_tis(E) evdev(E) ac(E) tpm(E) processor(E) ecryptfs(E) cbc(E) hmac(E) encrypted_keys(E) parport_pc(E) ppdev(E) lp(E) parport(E) autofs4(E) msr(E) ext4(E) crc16(E) mbcache(E) jbd2(E) hid_generic(E) usbhid(E) hid(E) sd_mod(E) ata_generic(E) pata_cs5536(E) ohci_pci(E) ehci_pci(E) libata(E) ohci_hcd(E) ehci_hcd(E) usbcore(E) usb_common(E) 8139too(E) scsi_mod(E) 8139cp(E) mii(E) button(E)
[  116.914011] CPU: 0 PID: 998 Comm: Xorg Tainted: G            E   4.5.0-1-686 #1 Debian 4.5.1-1
[  116.914026] Hardware name: First International Computer, Inc.  ION603/ION603, BIOS 6.00 PG 11/08/2007
[  116.914039]  00203286 6d1e16d9 f41a7d7c c12bdfdc 00000000 c1620568 c105b2bd c16279b0
[  116.914075]  00000000 000003e6 c1620568 000003da c104f16f 00000009 c104f16f f416e630
[  116.914110]  aeb10000 00000000 f41a7d8c c105b3c2 00000009 00000000 f41a7db8 c104f16f
[  116.914144] Call Trace:
[  116.914172]  [<c12bdfdc>] ? dump_stack+0x55/0x79
[  116.914202]  [<c105b2bd>] ? warn_slowpath_common+0x8d/0xc0
[  116.914226]  [<c104f16f>] ? untrack_pfn+0xbf/0xd0
[  116.914248]  [<c104f16f>] ? untrack_pfn+0xbf/0xd0
[  116.914272]  [<c105b3c2>] ? warn_slowpath_null+0x22/0x30
[  116.914294]  [<c104f16f>] ? untrack_pfn+0xbf/0xd0
[  116.914327]  [<c1174c73>] ? unmap_single_vma+0x673/0x680
[  116.914355]  [<c1175d93>] ? unmap_vmas+0x53/0xa0
[  116.914379]  [<c117bc8f>] ? exit_mmap+0x7f/0x140
[  116.914406]  [<c1058a07>] ? mmput+0x57/0xf0
[  116.914430]  [<c1059a36>] ? copy_process.part.34+0xa46/0x1440
[  116.914458]  [<c105a5f5>] ? _do_fork+0xe5/0x3d0
[  116.914483]  [<c105a9cc>] ? SyS_clone+0x2c/0x30
[  116.914506]  [<c1001aa0>] ? do_syscall_32_irqs_on+0x50/0xb0
[  116.914533]  [<c1540aed>] ? entry_INT80_32+0x31/0x31
[  116.914551] ---[ end trace 1f55bc51b2556927 ]---
[  116.995273] x86/PAT: Xorg:998 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  122.079251] x86/PAT: Xorg:1054 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  122.109710] x86/PAT: Xorg:1054 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  125.405807] x86/PAT: Xorg:1089 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  125.436396] x86/PAT: Xorg:1089 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  128.564811] x86/PAT: Xorg:1124 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  128.597590] x86/PAT: Xorg:1124 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  133.201261] x86/PAT: Xorg:1161 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  133.231766] x86/PAT: Xorg:1161 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  139.223533] x86/PAT: Xorg:1230 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  139.253874] x86/PAT: Xorg:1230 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  142.637965] x86/PAT: Xorg:1271 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  142.668392] x86/PAT: Xorg:1271 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  146.326923] x86/PAT: Xorg:1305 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  146.361277] x86/PAT: Xorg:1305 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  149.883986] x86/PAT: Xorg:1339 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  149.914362] x86/PAT: Xorg:1339 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  153.089631] x86/PAT: Xorg:1373 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  153.119953] x86/PAT: Xorg:1373 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  156.298740] x86/PAT: Xorg:1407 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  156.328444] x86/PAT: Xorg:1407 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  159.513976] x86/PAT: Xorg:1441 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  159.544889] x86/PAT: Xorg:1441 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  162.730944] x86/PAT: Xorg:1475 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  162.761226] x86/PAT: Xorg:1475 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  165.939330] x86/PAT: Xorg:1509 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  165.969955] x86/PAT: Xorg:1509 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  169.234325] x86/PAT: Xorg:1544 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  169.264831] x86/PAT: Xorg:1544 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  172.455382] x86/PAT: Xorg:1578 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  172.485683] x86/PAT: Xorg:1578 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  175.991655] x86/PAT: Xorg:1612 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  176.026978] x86/PAT: Xorg:1612 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  179.702421] x86/PAT: Xorg:1646 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  179.736815] x86/PAT: Xorg:1646 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  182.945093] x86/PAT: Xorg:1680 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  182.975301] x86/PAT: Xorg:1680 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  186.358914] x86/PAT: Xorg:1714 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  186.388685] x86/PAT: Xorg:1714 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  189.570929] x86/PAT: Xorg:1749 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  189.601159] x86/PAT: Xorg:1749 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  192.788854] x86/PAT: Xorg:1783 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  192.819063] x86/PAT: Xorg:1783 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  196.006308] x86/PAT: Xorg:1817 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  196.036183] x86/PAT: Xorg:1817 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  199.203749] x86/PAT: Xorg:1851 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  199.234669] x86/PAT: Xorg:1851 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  202.478325] x86/PAT: Xorg:1885 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  202.508771] x86/PAT: Xorg:1885 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  206.069769] x86/PAT: Xorg:1919 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  206.104433] x86/PAT: Xorg:1919 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  209.745192] x86/PAT: Xorg:1953 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[  209.775235] x86/PAT: Xorg:1953 map pfn expected mapping type uncached-minus for [mem 0xd0000000-0xd7ffffff], got write-combining
[   245.354] (--) Log file renamed from "/var/log/Xorg.pid-2341.log" to "/var/log/Xorg.0.log"
[   245.359] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[   245.362] X Protocol Version 11, Revision 0
[   245.363] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[   245.364] Current Operating System: Linux geode 4.5.0-1-686 #1 SMP Debian 4.5.1-1 (2016-04-14) i586
[   245.364] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-1-686 root=UUID=97b2628b-28a5-49f2-85f7-495728b3bef8 ro panic=15 pnpbios=off quiet splash cs5535audio.ac97_quirk=1
[   245.366] Build Date: 05 April 2016  07:01:49AM
[   245.366] xorg-server 2:1.18.3-1 (http://www.debian.org/support) 
[   245.366] Current version of pixman: 0.33.6
[   245.366] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   245.367] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   245.367] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 21 13:17:46 2016
[   245.372] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   245.379] (==) No Layout section.  Using the first Screen section.
[   245.380] (==) No screen section available. Using defaults.
[   245.380] (**) |-->Screen "Default Screen Section" (0)
[   245.380] (**) |   |-->Monitor "<default monitor>"
[   245.383] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   245.383] (==) Automatically adding devices
[   245.383] (==) Automatically enabling devices
[   245.383] (==) Automatically adding GPU devices
[   245.383] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   245.383] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   245.383] 	Entry deleted from font path.
[   245.383] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   245.383] 	Entry deleted from font path.
[   245.393] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   245.393] 	Entry deleted from font path.
[   245.393] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[   245.393] 	Entry deleted from font path.
[   245.393] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   245.393] 	Entry deleted from font path.
[   245.393] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   245.393] 	Entry deleted from font path.
[   245.393] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	built-ins
[   245.394] (==) ModulePath set to "/usr/lib/xorg/modules"
[   245.394] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   245.394] (II) Loader magic: 0x80279700
[   245.394] (II) Module ABI versions:
[   245.394] 	X.Org ANSI C Emulation: 0.4
[   245.394] 	X.Org Video Driver: 20.0
[   245.394] 	X.Org XInput driver : 22.1
[   245.394] 	X.Org Server Extension : 9.0
[   245.410] (++) using VT number 7

[   245.451] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c38
[   245.463] (--) PCI:*(0:0:1:1) 1022:2081:1509:801b rev 0, Mem @ 0xd0000000/268435456, 0xefff0000/16384, 0xeffec000/16384, 0xeffe8000/16384, 0xefff8000/16384
[   245.465] (II) LoadModule: "glx"
[   245.469] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   245.482] (II) Module glx: vendor="X.Org Foundation"
[   245.482] 	compiled for 1.18.3, module version = 1.0.0
[   245.484] 	ABI class: X.Org Server Extension, version 9.0
[   245.485] (==) AIGLX enabled
[   245.487] (==) Matched geode as autoconfigured driver 0
[   245.488] (==) Matched modesetting as autoconfigured driver 1
[   245.489] (==) Matched fbdev as autoconfigured driver 2
[   245.489] (==) Matched vesa as autoconfigured driver 3
[   245.489] (==) Assigned the driver to the xf86ConfigLayout
[   245.489] (II) LoadModule: "geode"
[   245.490] (II) Loading /usr/lib/xorg/modules/drivers/geode_drv.so
[   245.491] (II) Module geode: vendor="X.Org Foundation"
[   245.491] 	compiled for 1.18.0, module version = 2.11.18
[   245.491] 	Module class: X.Org Video Driver
[   245.491] 	ABI class: X.Org Video Driver, version 20.0
[   245.491] (II) LoadModule: "modesetting"
[   245.501] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   245.504] (II) Module modesetting: vendor="X.Org Foundation"
[   245.504] 	compiled for 1.18.3, module version = 1.18.3
[   245.506] 	Module class: X.Org Video Driver
[   245.506] 	ABI class: X.Org Video Driver, version 20.0
[   245.506] (II) LoadModule: "fbdev"
[   245.507] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   245.507] (II) Module fbdev: vendor="X.Org Foundation"
[   245.507] 	compiled for 1.18.0, module version = 0.4.4
[   245.512] 	Module class: X.Org Video Driver
[   245.512] 	ABI class: X.Org Video Driver, version 20.0
[   245.512] (II) LoadModule: "vesa"
[   245.514] (WW) Warning, couldn't open module vesa
[   245.514] (II) UnloadModule: "vesa"
[   245.514] (II) Unloading vesa
[   245.514] (EE) Failed to load module "vesa" (module does not exist, 0)
[   245.514] (II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
[   245.514] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   245.514] (II) FBDEV: driver for framebuffer: fbdev
[   245.523] AmdPciProbe: Probing for supported devices!
[   245.525] (WW) Falling back to old probe method for modesetting
[   245.525] (EE) open /dev/dri/card0: No such file or directory
[   245.525] (WW) Falling back to old probe method for fbdev
[   245.525] (II) Loading sub module "fbdevhw"
[   245.525] (II) LoadModule: "fbdevhw"
[   245.526] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   245.526] (II) Module fbdevhw: vendor="X.Org Foundation"
[   245.527] 	compiled for 1.18.3, module version = 0.0.2
[   245.527] 	ABI class: X.Org Video Driver, version 20.0
[   245.527] (II) Loading sub module "vgahw"
[   245.527] (II) LoadModule: "vgahw"
[   245.533] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   245.535] (II) Module vgahw: vendor="X.Org Foundation"
[   245.535] 	compiled for 1.18.3, module version = 0.1.0
[   245.535] 	ABI class: X.Org Video Driver, version 20.0
[   245.539] (II) GEODE(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 16/16
[   245.540] (==) GEODE(0): Depth 16, (==) framebuffer bpp 16
[   245.540] (==) GEODE(0): RGB weight 565
[   245.540] (==) GEODE(0): Default visual is TrueColor
[   245.540] (==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
[   245.540] (==) GEODE(0): No DCON is present
[   245.541] (II) GEODE(0): LX output options:
[   245.541] (II) GEODE(0):  CRT: YES
[   245.541] (II) GEODE(0):  PANEL: NO
[   245.541] (II) GEODE(0):  DCON: NO
[   245.541] (II) GEODE(0):  VGA: YES
[   245.541] (II) Loading sub module "int10"
[   245.541] (II) LoadModule: "int10"
[   245.541] (II) Loading /usr/lib/xorg/modules/libint10.so
[   245.542] (II) Module int10: vendor="X.Org Foundation"
[   245.542] 	compiled for 1.18.3, module version = 1.0.0
[   245.542] 	ABI class: X.Org Video Driver, version 20.0
[   245.563] (II) GEODE(0): Primary V_BIOS segment is: 0xc000
[   245.565] (II) GEODE(0): Output default has no monitor section
[   245.567] (II) GEODE(0): I2C bus "CS5536 DDC" initialized.
[   245.567] (II) GEODE(0): I2C device "CS5536 DDC:ddc2" registered at address 0xA0.
[   245.627] (II) GEODE(0): EDID for output default
[   245.628] (II) GEODE(0): Manufacturer: VSC  Model: 4b1b  Serial#: 16843009
[   245.629] (II) GEODE(0): Year: 2004  Week: 48
[   245.630] (II) GEODE(0): EDID Version: 1.3
[   245.630] (II) GEODE(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   245.631] (II) GEODE(0): Sync:  Separate  Composite  SyncOnGreen
[   245.633] (II) GEODE(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[   245.634] (II) GEODE(0): Gamma: 2.20
[   245.634] (II) GEODE(0): DPMS capabilities: Off; RGB/Color Display
[   245.634] (II) GEODE(0): First detailed timing is preferred mode
[   245.634] (II) GEODE(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.610
[   245.635] (II) GEODE(0): blueX: 0.140 blueY: 0.070   whiteX: 0.310 whiteY: 0.330
[   245.635] (II) GEODE(0): Supported established timings:
[   245.635] (II) GEODE(0): 720x400@70Hz
[   245.635] (II) GEODE(0): 640x480@60Hz
[   245.635] (II) GEODE(0): 640x480@67Hz
[   245.635] (II) GEODE(0): 640x480@72Hz
[   245.635] (II) GEODE(0): 640x480@75Hz
[   245.635] (II) GEODE(0): 800x600@56Hz
[   245.635] (II) GEODE(0): 800x600@60Hz
[   245.635] (II) GEODE(0): 800x600@72Hz
[   245.635] (II) GEODE(0): 800x600@75Hz
[   245.635] (II) GEODE(0): 832x624@75Hz
[   245.635] (II) GEODE(0): 1024x768@60Hz
[   245.641] (II) GEODE(0): 1024x768@70Hz
[   245.641] (II) GEODE(0): 1024x768@75Hz
[   245.641] (II) GEODE(0): 1280x1024@75Hz
[   245.641] (II) GEODE(0): 1152x864@75Hz
[   245.641] (II) GEODE(0): Manufacturer's mask: 0
[   245.641] (II) GEODE(0): Supported standard timings:
[   245.641] (II) GEODE(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   245.642] (II) GEODE(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   245.642] (II) GEODE(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
[   245.642] (II) GEODE(0): #3: hsize: 800  vsize 600  refresh: 85  vid: 22853
[   245.642] (II) GEODE(0): #4: hsize: 640  vsize 480  refresh: 85  vid: 22833
[   245.642] (II) GEODE(0): Supported detailed timing:
[   245.642] (II) GEODE(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[   245.642] (II) GEODE(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[   245.642] (II) GEODE(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[   245.642] (II) GEODE(0): Serial No: PJJ044800057
[   245.642] (II) GEODE(0): Ranges: V min: 50 V max: 85 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[   245.642] (II) GEODE(0): Monitor name: VP171s-2
[   245.642] (II) GEODE(0): EDID (in hex):
[   245.643] (II) GEODE(0): 	00ffffffffffff005a631b4b01010101
[   245.643] (II) GEODE(0): 	300e01030e221b782ac5c6a3574a9c23
[   245.643] (II) GEODE(0): 	124f54bfef808180714f615945593159
[   245.643] (II) GEODE(0): 	010101010101302a009851002a403070
[   245.643] (II) GEODE(0): 	1300520e1100001e000000ff00504a4a
[   245.643] (II) GEODE(0): 	3034343830303035370a000000fd0032
[   245.643] (II) GEODE(0): 	551e520e000a202020202020000000fc
[   245.643] (II) GEODE(0): 	005650313731732d320a20202020008b
[   245.643] (II) GEODE(0): EDID vendor "VSC", prod id 19227
[   245.650] (II) GEODE(0): Printing probed modes for output default
[   245.650] (II) GEODE(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   245.650] (II) GEODE(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   245.650] (II) GEODE(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   245.650] (II) GEODE(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[   245.650] (II) GEODE(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   245.650] (II) GEODE(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   245.650] (II) GEODE(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   245.650] (II) GEODE(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   245.651] (II) GEODE(0): Modeline "800x600"x85.1   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[   245.651] (II) GEODE(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   245.651] (II) GEODE(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   245.651] (II) GEODE(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   245.651] (II) GEODE(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   245.651] (II) GEODE(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[   245.651] (II) GEODE(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   245.651] (II) GEODE(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   245.657] (II) GEODE(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   245.657] (II) GEODE(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   245.658] (II) GEODE(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   245.658] (II) GEODE(0): Output default connected
[   245.658] (II) GEODE(0): Using exact sizes for initial modes
[   245.658] (II) GEODE(0): Output default using initial mode 1280x1024 +0+0
[   245.658] (II) GEODE(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   245.658] (--) GEODE(0): Virtual size is 1280x1280 (pitch 0)
[   245.658] (**) GEODE(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[   245.658] (II) GEODE(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   245.658] (**) GEODE(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[   245.659] (II) GEODE(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   245.659] (**) GEODE(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[   245.659] (II) GEODE(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   245.659] (**) GEODE(0):  Driver mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
[   245.659] (II) GEODE(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[   245.659] (**) GEODE(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[   245.659] (II) GEODE(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   245.659] (**) GEODE(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[   245.659] (II) GEODE(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   245.664] (**) GEODE(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[   245.665] (II) GEODE(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   245.665] (**) GEODE(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[   245.665] (II) GEODE(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   245.665] (**) GEODE(0):  Driver mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
[   245.665] (II) GEODE(0): Modeline "800x600"x85.1   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[   245.665] (**) GEODE(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[   245.665] (II) GEODE(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   245.666] (**) GEODE(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[   245.666] (II) GEODE(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   245.666] (**) GEODE(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[   245.666] (II) GEODE(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   245.666] (**) GEODE(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[   245.666] (II) GEODE(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   245.666] (**) GEODE(0):  Driver mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
[   245.666] (II) GEODE(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[   245.666] (**) GEODE(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[   245.667] (II) GEODE(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   245.667] (**) GEODE(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[   245.667] (II) GEODE(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   245.667] (**) GEODE(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[   245.667] (II) GEODE(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   245.667] (**) GEODE(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[   245.667] (II) GEODE(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   245.667] (**) GEODE(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[   245.667] (II) GEODE(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   245.667] (==) GEODE(0): DPI set to (96, 96)
[   245.674] (II) Loading sub module "fb"
[   245.674] (II) LoadModule: "fb"
[   245.675] (II) Loading /usr/lib/xorg/modules/libfb.so
[   245.680] (II) Module fb: vendor="X.Org Foundation"
[   245.681] 	compiled for 1.18.3, module version = 1.0.0
[   245.681] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   245.681] (II) Loading sub module "exa"
[   245.681] (II) LoadModule: "exa"
[   245.682] (II) Loading /usr/lib/xorg/modules/libexa.so
[   245.682] (II) Module exa: vendor="X.Org Foundation"
[   245.683] 	compiled for 1.18.3, module version = 2.6.0
[   245.683] 	ABI class: X.Org Video Driver, version 20.0
[   245.683] (II) UnloadModule: "modesetting"
[   245.683] (II) Unloading modesetting
[   245.683] (II) UnloadModule: "fbdev"
[   245.683] (II) Unloading fbdev
[   245.689] (II) UnloadSubModule: "fbdevhw"
[   245.689] (II) Unloading fbdevhw
[   245.690] (II) GEODE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[   245.699] (II) GEODE(0): Geode LX video memory 7e00000 bytes at 0xaea86000
[   245.707] (II) GEODE(0): LX video memory:
[   245.707] (II) GEODE(0):  Display: 0x500000 bytes
[   245.709] (II) GEODE(0):  Compression: 0xaa000 bytes
[   245.709] (II) GEODE(0):  Cursor: 0x3000 bytes
[   245.709] (II) GEODE(0):  ExaBfrSz: 0x40000 bytes
[   245.709] (II) GEODE(0):  EXA: 0x7713000 bytes
[   245.709] (II) GEODE(0):  FREE: 0x0 bytes
[   245.815] (II) EXA(0): Offscreen pixmap area of 124858368 bytes
[   245.816] (II) EXA(0): Driver registered support for the following operations:
[   245.817] (II)         Solid
[   245.818] (II)         Copy
[   245.819] (II)         Composite (RENDER acceleration)
[   245.821] (==) GEODE(0): Backing store enabled
[   245.822] (==) GEODE(0): DPMS enabled
[   245.823] (II) GEODE(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   245.825] (--) RandR disabled
[   245.898] (II) SELinux: Disabled on system
[   245.909] (II) AIGLX: Screen 0 is not DRI2 capable
[   245.910] (EE) AIGLX: reverting to software rendering
[   246.093] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   246.102] (II) AIGLX: Loaded and initialized swrast
[   246.103] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   246.108] (II) GEODE(0): Setting screen physical size to 338 x 270
[   246.214] (EE) XKB: Could not invoke xkbcomp
[   246.216] (EE) XKB: Couldn't compile keymap
[   246.217] (EE) XKB: Failed to load keymap. Loading default keymap instead.
[   246.246] (EE) XKB: Could not invoke xkbcomp
[   246.247] (EE) XKB: Couldn't compile keymap
[   246.248] XKB: Failed to compile keymap
[   246.249] Keyboard initialization failed. This could be a missing or incorrect setup of xkeyboard-config.
[   246.249] (EE) 
Fatal server error:
[   246.251] (EE) Failed to activate core devices.(EE) 
[   246.253] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   246.253] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[   246.253] (EE) 
[   246.296] (EE) Server terminated with error (1). Closing log file.
[    99.983] (--) Log file renamed from "/var/log/Xorg.pid-798.log" to "/var/log/Xorg.0.log"
[   100.012] 
X.Org X Server 1.18.3
Release Date: 2016-04-04
[   100.016] X Protocol Version 11, Revision 0
[   100.016] Build Operating System: Linux 3.16.0-4-amd64 i686 Debian
[   100.016] Current Operating System: Linux geode 3.16.0-4-586 #1 Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29) i586
[   100.017] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-586 root=UUID=97b2628b-28a5-49f2-85f7-495728b3bef8 ro panic=15 pnpbios=off quiet splash cs5535audio.ac97_quirk=1
[   100.017] Build Date: 05 April 2016  07:01:49AM
[   100.017] xorg-server 2:1.18.3-1 (http://www.debian.org/support) 
[   100.017] Current version of pixman: 0.33.6
[   100.017] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   100.017] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   100.018] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 21 12:57:54 2016
[   100.064] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   100.102] (==) No Layout section.  Using the first Screen section.
[   100.102] (==) No screen section available. Using defaults.
[   100.102] (**) |-->Screen "Default Screen Section" (0)
[   100.102] (**) |   |-->Monitor "<default monitor>"
[   100.136] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   100.136] (==) Automatically adding devices
[   100.136] (==) Automatically enabling devices
[   100.136] (==) Automatically adding GPU devices
[   100.136] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   100.198] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[   100.199] 	Entry deleted from font path.
[   100.199] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[   100.199] 	Entry deleted from font path.
[   100.199] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[   100.199] 	Entry deleted from font path.
[   100.199] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[   100.199] 	Entry deleted from font path.
[   100.199] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[   100.199] 	Entry deleted from font path.
[   100.199] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[   100.199] 	Entry deleted from font path.
[   100.199] (==) FontPath set to:
	/usr/share/fonts/X11/misc,
	built-ins
[   100.204] (==) ModulePath set to "/usr/lib/xorg/modules"
[   100.204] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   100.205] (II) Loader magic: 0xb7754700
[   100.205] (II) Module ABI versions:
[   100.205] 	X.Org ANSI C Emulation: 0.4
[   100.205] 	X.Org Video Driver: 20.0
[   100.205] 	X.Org XInput driver : 22.1
[   100.205] 	X.Org Server Extension : 9.0
[   100.219] (++) using VT number 7

[   100.280] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   100.308] (--) PCI:*(0:0:1:1) 1022:2081:1509:801b rev 0, Mem @ 0xd0000000/268435456, 0xefff0000/16384, 0xeffec000/16384, 0xeffe8000/16384, 0xefff8000/16384
[   100.335] (II) LoadModule: "glx"
[   100.385] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   100.651] (II) Module glx: vendor="X.Org Foundation"
[   100.651] 	compiled for 1.18.3, module version = 1.0.0
[   100.651] 	ABI class: X.Org Server Extension, version 9.0
[   100.651] (==) AIGLX enabled
[   100.651] (==) Matched geode as autoconfigured driver 0
[   100.651] (==) Matched modesetting as autoconfigured driver 1
[   100.651] (==) Matched fbdev as autoconfigured driver 2
[   100.651] (==) Matched vesa as autoconfigured driver 3
[   100.652] (==) Assigned the driver to the xf86ConfigLayout
[   100.652] (II) LoadModule: "geode"
[   100.677] (II) Loading /usr/lib/xorg/modules/drivers/geode_drv.so
[   100.723] (II) Module geode: vendor="X.Org Foundation"
[   100.723] 	compiled for 1.18.0, module version = 2.11.18
[   100.723] 	Module class: X.Org Video Driver
[   100.723] 	ABI class: X.Org Video Driver, version 20.0
[   100.723] (II) LoadModule: "modesetting"
[   100.729] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   100.745] (II) Module modesetting: vendor="X.Org Foundation"
[   100.745] 	compiled for 1.18.3, module version = 1.18.3
[   100.745] 	Module class: X.Org Video Driver
[   100.745] 	ABI class: X.Org Video Driver, version 20.0
[   100.745] (II) LoadModule: "fbdev"
[   100.746] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[   100.760] (II) Module fbdev: vendor="X.Org Foundation"
[   100.760] 	compiled for 1.18.0, module version = 0.4.4
[   100.760] 	Module class: X.Org Video Driver
[   100.760] 	ABI class: X.Org Video Driver, version 20.0
[   100.760] (II) LoadModule: "vesa"
[   100.762] (WW) Warning, couldn't open module vesa
[   100.762] (II) UnloadModule: "vesa"
[   100.762] (II) Unloading vesa
[   100.762] (EE) Failed to load module "vesa" (module does not exist, 0)
[   100.762] (II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
[   100.762] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   100.762] (II) FBDEV: driver for framebuffer: fbdev
[   100.768] AmdPciProbe: Probing for supported devices!
[   100.768] (WW) Falling back to old probe method for modesetting
[   100.768] (EE) open /dev/dri/card0: No such file or directory
[   100.768] (WW) Falling back to old probe method for fbdev
[   100.768] (II) Loading sub module "fbdevhw"
[   100.768] (II) LoadModule: "fbdevhw"
[   100.769] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[   100.788] (II) Module fbdevhw: vendor="X.Org Foundation"
[   100.788] 	compiled for 1.18.3, module version = 0.0.2
[   100.788] 	ABI class: X.Org Video Driver, version 20.0
[   100.788] (II) Loading sub module "vgahw"
[   100.789] (II) LoadModule: "vgahw"
[   100.789] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[   100.791] (II) Module vgahw: vendor="X.Org Foundation"
[   100.791] 	compiled for 1.18.3, module version = 0.1.0
[   100.791] 	ABI class: X.Org Video Driver, version 20.0
[   100.792] (II) GEODE(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 16/16
[   100.792] (==) GEODE(0): Depth 16, (==) framebuffer bpp 16
[   100.792] (==) GEODE(0): RGB weight 565
[   100.792] (==) GEODE(0): Default visual is TrueColor
[   100.793] (==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
[   100.793] (==) GEODE(0): No DCON is present
[   100.793] (II) GEODE(0): LX output options:
[   100.793] (II) GEODE(0):  CRT: YES
[   100.793] (II) GEODE(0):  PANEL: NO
[   100.793] (II) GEODE(0):  DCON: NO
[   100.793] (II) GEODE(0):  VGA: YES
[   100.793] (II) Loading sub module "int10"
[   100.793] (II) LoadModule: "int10"
[   100.794] (II) Loading /usr/lib/xorg/modules/libint10.so
[   100.821] (II) Module int10: vendor="X.Org Foundation"
[   100.821] 	compiled for 1.18.3, module version = 1.0.0
[   100.822] 	ABI class: X.Org Video Driver, version 20.0
[   100.835] (II) GEODE(0): Primary V_BIOS segment is: 0xc000
[   100.842] (II) GEODE(0): Output default has no monitor section
[   100.844] (II) GEODE(0): I2C bus "CS5536 DDC" initialized.
[   100.845] (II) GEODE(0): I2C device "CS5536 DDC:ddc2" registered at address 0xA0.
[   101.026] (II) GEODE(0): EDID for output default
[   101.028] (II) GEODE(0): Manufacturer: VSC  Model: 4b1b  Serial#: 16843009
[   101.028] (II) GEODE(0): Year: 2004  Week: 48
[   101.028] (II) GEODE(0): EDID Version: 1.3
[   101.028] (II) GEODE(0): Analog Display Input,  Input Voltage Level: 0.700/0.300 V
[   101.029] (II) GEODE(0): Sync:  Separate  Composite  SyncOnGreen
[   101.029] (II) GEODE(0): Max Image Size [cm]: horiz.: 34  vert.: 27
[   101.029] (II) GEODE(0): Gamma: 2.20
[   101.029] (II) GEODE(0): DPMS capabilities: Off; RGB/Color Display
[   101.029] (II) GEODE(0): First detailed timing is preferred mode
[   101.029] (II) GEODE(0): redX: 0.640 redY: 0.340   greenX: 0.290 greenY: 0.610
[   101.029] (II) GEODE(0): blueX: 0.140 blueY: 0.070   whiteX: 0.310 whiteY: 0.330
[   101.030] (II) GEODE(0): Supported established timings:
[   101.030] (II) GEODE(0): 720x400@70Hz
[   101.030] (II) GEODE(0): 640x480@60Hz
[   101.030] (II) GEODE(0): 640x480@67Hz
[   101.030] (II) GEODE(0): 640x480@72Hz
[   101.030] (II) GEODE(0): 640x480@75Hz
[   101.030] (II) GEODE(0): 800x600@56Hz
[   101.030] (II) GEODE(0): 800x600@60Hz
[   101.030] (II) GEODE(0): 800x600@72Hz
[   101.030] (II) GEODE(0): 800x600@75Hz
[   101.030] (II) GEODE(0): 832x624@75Hz
[   101.030] (II) GEODE(0): 1024x768@60Hz
[   101.030] (II) GEODE(0): 1024x768@70Hz
[   101.030] (II) GEODE(0): 1024x768@75Hz
[   101.030] (II) GEODE(0): 1280x1024@75Hz
[   101.031] (II) GEODE(0): 1152x864@75Hz
[   101.031] (II) GEODE(0): Manufacturer's mask: 0
[   101.031] (II) GEODE(0): Supported standard timings:
[   101.031] (II) GEODE(0): #0: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[   101.031] (II) GEODE(0): #1: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[   101.031] (II) GEODE(0): #2: hsize: 1024  vsize 768  refresh: 85  vid: 22881
[   101.031] (II) GEODE(0): #3: hsize: 800  vsize 600  refresh: 85  vid: 22853
[   101.031] (II) GEODE(0): #4: hsize: 640  vsize 480  refresh: 85  vid: 22833
[   101.031] (II) GEODE(0): Supported detailed timing:
[   101.031] (II) GEODE(0): clock: 108.0 MHz   Image Size:  338 x 270 mm
[   101.031] (II) GEODE(0): h_active: 1280  h_sync: 1328  h_sync_end 1440 h_blank_end 1688 h_border: 0
[   101.031] (II) GEODE(0): v_active: 1024  v_sync: 1025  v_sync_end 1028 v_blanking: 1066 v_border: 0
[   101.032] (II) GEODE(0): Serial No: PJJ044800057
[   101.042] (II) GEODE(0): Ranges: V min: 50 V max: 85 Hz, H min: 30 H max: 82 kHz, PixClock max 145 MHz
[   101.042] (II) GEODE(0): Monitor name: VP171s-2
[   101.042] (II) GEODE(0): EDID (in hex):
[   101.042] (II) GEODE(0): 	00ffffffffffff005a631b4b01010101
[   101.042] (II) GEODE(0): 	300e01030e221b782ac5c6a3574a9c23
[   101.042] (II) GEODE(0): 	124f54bfef808180714f615945593159
[   101.043] (II) GEODE(0): 	010101010101302a009851002a403070
[   101.043] (II) GEODE(0): 	1300520e1100001e000000ff00504a4a
[   101.043] (II) GEODE(0): 	3034343830303035370a000000fd0032
[   101.043] (II) GEODE(0): 	551e520e000a202020202020000000fc
[   101.043] (II) GEODE(0): 	005650313731732d320a20202020008b
[   101.043] (II) GEODE(0): EDID vendor "VSC", prod id 19227
[   101.043] (II) GEODE(0): Printing probed modes for output default
[   101.044] (II) GEODE(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   101.044] (II) GEODE(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   101.044] (II) GEODE(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   101.044] (II) GEODE(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[   101.044] (II) GEODE(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   101.044] (II) GEODE(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   101.044] (II) GEODE(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   101.044] (II) GEODE(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   101.045] (II) GEODE(0): Modeline "800x600"x85.1   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[   101.045] (II) GEODE(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   101.045] (II) GEODE(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   101.045] (II) GEODE(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   101.045] (II) GEODE(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   101.045] (II) GEODE(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[   101.045] (II) GEODE(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   101.045] (II) GEODE(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   101.046] (II) GEODE(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   101.046] (II) GEODE(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   101.046] (II) GEODE(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   101.046] (II) GEODE(0): Output default connected
[   101.046] (II) GEODE(0): Using exact sizes for initial modes
[   101.046] (II) GEODE(0): Output default using initial mode 1280x1024 +0+0
[   101.046] (II) GEODE(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   101.046] (--) GEODE(0): Virtual size is 1280x1280 (pitch 0)
[   101.046] (**) GEODE(0):  Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
[   101.046] (II) GEODE(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   101.047] (**) GEODE(0):  Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
[   101.047] (II) GEODE(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   101.047] (**) GEODE(0):  Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
[   101.047] (II) GEODE(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   101.047] (**) GEODE(0):  Driver mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
[   101.047] (II) GEODE(0): Modeline "1024x768"x85.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[   101.047] (**) GEODE(0):  Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
[   101.047] (II) GEODE(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   101.047] (**) GEODE(0):  Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
[   101.060] (II) GEODE(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   101.061] (**) GEODE(0):  Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[   101.061] (II) GEODE(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   101.061] (**) GEODE(0):  Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
[   101.061] (II) GEODE(0): Modeline "832x624"x74.6   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   101.061] (**) GEODE(0):  Driver mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.1 Hz
[   101.061] (II) GEODE(0): Modeline "800x600"x85.1   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[   101.061] (**) GEODE(0):  Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
[   101.061] (II) GEODE(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   101.061] (**) GEODE(0):  Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
[   101.062] (II) GEODE(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   101.062] (**) GEODE(0):  Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
[   101.062] (II) GEODE(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   101.062] (**) GEODE(0):  Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
[   101.062] (II) GEODE(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   101.062] (**) GEODE(0):  Driver mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
[   101.062] (II) GEODE(0): Modeline "640x480"x85.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[   101.062] (**) GEODE(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
[   101.062] (II) GEODE(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   101.063] (**) GEODE(0):  Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
[   101.063] (II) GEODE(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   101.063] (**) GEODE(0):  Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
[   101.063] (II) GEODE(0): Modeline "640x480"x66.7   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   101.063] (**) GEODE(0):  Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 59.9 Hz
[   101.063] (II) GEODE(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   101.063] (**) GEODE(0):  Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
[   101.063] (II) GEODE(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   101.063] (==) GEODE(0): DPI set to (96, 96)
[   101.063] (II) Loading sub module "fb"
[   101.070] (II) LoadModule: "fb"
[   101.071] (II) Loading /usr/lib/xorg/modules/libfb.so
[   101.076] (II) Module fb: vendor="X.Org Foundation"
[   101.078] 	compiled for 1.18.3, module version = 1.0.0
[   101.078] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   101.079] (II) Loading sub module "exa"
[   101.079] (II) LoadModule: "exa"
[   101.079] (II) Loading /usr/lib/xorg/modules/libexa.so
[   101.088] (II) Module exa: vendor="X.Org Foundation"
[   101.088] 	compiled for 1.18.3, module version = 2.6.0
[   101.088] 	ABI class: X.Org Video Driver, version 20.0
[   101.088] (II) UnloadModule: "modesetting"
[   101.088] (II) Unloading modesetting
[   101.088] (II) UnloadModule: "fbdev"
[   101.089] (II) Unloading fbdev
[   101.089] (II) UnloadSubModule: "fbdevhw"
[   101.089] (II) Unloading fbdevhw
[   101.089] (II) GEODE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[   101.106] (II) GEODE(0): Geode LX video memory 7e00000 bytes at 0xae84d000
[   101.108] (II) GEODE(0): LX video memory:
[   101.108] (II) GEODE(0):  Display: 0x500000 bytes
[   101.108] (II) GEODE(0):  Compression: 0xaa000 bytes
[   101.108] (II) GEODE(0):  Cursor: 0x3000 bytes
[   101.108] (II) GEODE(0):  ExaBfrSz: 0x40000 bytes
[   101.109] (II) GEODE(0):  EXA: 0x7713000 bytes
[   101.109] (II) GEODE(0):  FREE: 0x0 bytes
[   101.489] (II) EXA(0): Offscreen pixmap area of 124858368 bytes
[   101.489] (II) EXA(0): Driver registered support for the following operations:
[   101.489] (II)         Solid
[   101.489] (II)         Copy
[   101.489] (II)         Composite (RENDER acceleration)
[   101.489] (==) GEODE(0): Backing store enabled
[   101.505] (==) GEODE(0): DPMS enabled
[   101.505] (II) GEODE(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   101.506] (--) RandR disabled
[   101.749] (II) SELinux: Disabled on system
[   101.775] (II) AIGLX: Screen 0 is not DRI2 capable
[   101.788] (EE) AIGLX: reverting to software rendering
[   103.757] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   103.775] (II) AIGLX: Loaded and initialized swrast
[   103.778] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[   103.789] (II) GEODE(0): Setting screen physical size to 338 x 270
[   105.100] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   105.102] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   105.102] (II) LoadModule: "evdev"
[   105.103] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[   105.166] (II) Module evdev: vendor="X.Org Foundation"
[   105.166] 	compiled for 1.18.0, module version = 2.10.1
[   105.166] 	Module class: X.Org XInput Driver
[   105.166] 	ABI class: X.Org XInput driver, version 22.1
[   105.174] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 12 paused 0
[   105.180] (II) Using input driver 'evdev' for 'Power Button'
[   105.180] (**) Power Button: always reports core events
[   105.180] (**) evdev: Power Button: Device: "/dev/input/event2"
[   105.181] (--) evdev: Power Button: Vendor 0 Product 0x1
[   105.181] (--) evdev: Power Button: Found keys
[   105.181] (II) evdev: Power Button: Configuring as keyboard
[   105.181] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   105.181] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   105.181] (**) Option "xkb_rules" "evdev"
[   105.182] (**) Option "xkb_model" "pc105"
[   105.182] (**) Option "xkb_layout" "fi"
[   105.182] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[   105.649] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   105.656] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[   105.661] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 13 paused 0
[   105.661] (II) Using input driver 'evdev' for 'Power Button'
[   105.661] (**) Power Button: always reports core events
[   105.661] (**) evdev: Power Button: Device: "/dev/input/event0"
[   105.662] (--) evdev: Power Button: Vendor 0 Product 0x1
[   105.662] (--) evdev: Power Button: Found keys
[   105.662] (II) evdev: Power Button: Configuring as keyboard
[   105.662] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[   105.662] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   105.663] (**) Option "xkb_rules" "evdev"
[   105.663] (**) Option "xkb_model" "pc105"
[   105.663] (**) Option "xkb_layout" "fi"
[   105.663] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[   105.690] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[   105.696] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[   105.703] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 14 paused 0
[   105.704] (II) Using input driver 'evdev' for 'Sleep Button'
[   105.704] (**) Sleep Button: always reports core events
[   105.704] (**) evdev: Sleep Button: Device: "/dev/input/event1"
[   105.704] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[   105.704] (--) evdev: Sleep Button: Found keys
[   105.705] (II) evdev: Sleep Button: Configuring as keyboard
[   105.705] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[   105.705] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   105.705] (**) Option "xkb_rules" "evdev"
[   105.705] (**) Option "xkb_model" "pc105"
[   105.705] (**) Option "xkb_layout" "fi"
[   105.705] (**) Option "xkb_options" "lv3:ralt_switch,terminate:ctrl_alt_bksp"
[   105.732] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event3)
[   105.740] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
[   105.746] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 15 paused 0
[   105.747] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
[   105.747] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[   105.747] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event3"
[   105.747] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc00e
[   105.747] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 3 mouse buttons
[   105.747] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
[   105.748] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
[   105.748] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
[   105.748] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
[   105.748] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
[   105.748] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
[   105.748] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[   105.748] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:0f.4/usb2/2-3/2-3:1.0/0003:046D:C00E.0001/input/input3/event3"
[   105.749] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
[   105.749] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
[   105.751] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
[   105.751] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
[   105.751] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[   105.751] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[   105.778] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[   105.783] (II) No input driver specified, ignoring this device.
[   105.783] (II) This device may have been added with another device file.
[   122.942] (II) GEODE(0): EDID vendor "VSC", prod id 19227
[   122.944] (II) GEODE(0): Using EDID range info for horizontal sync
[   122.944] (II) GEODE(0): Using EDID range info for vertical refresh
[   122.944] (II) GEODE(0): Printing DDC gathered Modelines:
[   122.945] (II) GEODE(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz eP)
[   122.945] (II) GEODE(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[   122.945] (II) GEODE(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[   122.945] (II) GEODE(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[   122.945] (II) GEODE(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[   122.945] (II) GEODE(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz e)
[   122.945] (II) GEODE(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[   122.945] (II) GEODE(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[   122.945] (II) GEODE(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[   122.946] (II) GEODE(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[   122.946] (II) GEODE(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[   122.946] (II) GEODE(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[   122.946] (II) GEODE(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz e)
[   122.946] (II) GEODE(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[   122.946] (II) GEODE(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[   122.946] (II) GEODE(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[   122.946] (II) GEODE(0): Modeline "1024x768"x0.0   94.50  1024 1072 1168 1376  768 769 772 808 +hsync +vsync (68.7 kHz e)
[   122.947] (II) GEODE(0): Modeline "800x600"x0.0   56.25  800 832 896 1048  600 601 604 631 +hsync +vsync (53.7 kHz e)
[   122.947] (II) GEODE(0): Modeline "640x480"x0.0   36.00  640 696 752 832  480 481 484 509 -hsync -vsync (43.3 kHz e)
[   122.947] (II) GEODE(0): EDID vendor "VSC", prod id 19227
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-4-586 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29)
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000037faffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000037fb0000-0x0000000037fb2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000037fb3000-0x0000000037fbffff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ffff0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.2 present.
[    0.000000] DMI: First International Computer, Inc.  ION603/ION603, BIOS 6.00 PG 11/08/2007
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x37fb0 max_arch_pfn = 0x100000
[    0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[    0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[    0.000000]  [mem 0x37000000-0x373fffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[    0.000000]  [mem 0x30000000-0x36ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0x2fffffff]
[    0.000000]  [mem 0x00100000-0x003fffff] page 4k
[    0.000000]  [mem 0x00400000-0x2fffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[    0.000000]  [mem 0x37400000-0x377fdfff] page 4k
[    0.000000] BRK [0x0171f000, 0x0171ffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x350f6000-0x36872fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F5910 000014 (v00 AMDGX3)
[    0.000000] ACPI: RSDT 0x0000000037FB3000 000028 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI: FACP 0x0000000037FB3080 000074 (v01 AMDGX3 AWRDACPI 42302E31 AWRD 00000000)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 16, using default 8 (20140424/tbfadt-704)
[    0.000000] ACPI: DSDT 0x0000000037FB3100 001581 (v01 AMDGX3 AWRDACPI 00001017 MSFT 03000000)
[    0.000000] ACPI: FACS 0x0000000037FB0000 000040
[    0.000000] 7MB HIGHMEM available.
[    0.000000] 887MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 377fe000
[    0.000000]   low ram: 0 - 377fe000
[    0.000000] BRK [0x01720000, 0x01720fff] PGTABLE
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   Normal   [mem 0x01000000-0x377fdfff]
[    0.000000]   HighMem  [mem 0x377fe000-0x37faffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0x37faffff]
[    0.000000] On node 0 totalpages: 229197
[    0.000000] free_area_init_node: node 0, pgdat c15f54c0, node_mem_map f70fe020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   Normal zone: 1744 pages used for memmap
[    0.000000]   Normal zone: 223230 pages, LIFO batch:31
[    0.000000]   HighMem zone: 16 pages used for memmap
[    0.000000]   HighMem zone: 1970 pages, LIFO batch:0
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x9c10
[    0.000000] No local APIC present or hardware disabled
[    0.000000] APIC: disable apic facility
[    0.000000] APIC: switched to apic NOOP
[    0.000000] nr_irqs_gsi: 16
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x37fc0000-0xfffeffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 227421
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-586 root=UUID=97b2628b-28a5-49f2-85f7-495728b3bef8 ro panic=15 pnpbios=off quiet splash cs5535audio.ac97_quirk=1
[    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (000377fe:00037fb0)
[    0.000000] Initializing Movable for node 0 (00000000:00000000)
[    0.000000] Memory: 877344K/916788K available (4257K kernel code, 506K rwdata, 1396K rodata, 672K init, 416K bss, 39444K reserved, 7880K highmem)
[    0.000000] virtual kernel memory layout:
                   fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
                   pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
                   vmalloc : 0xf7ffe000 - 0xff7fe000   ( 120 MB)
                   lowmem  : 0xc0000000 - 0xf77fe000   ( 887 MB)
                     .init : 0xc1607000 - 0xc16af000   ( 672 kB)
                     .data : 0xc1428a50 - 0xc1605940   (1907 kB)
                     .text : 0xc1000000 - 0xc1428a50   (4258 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=f6c06000 soft=f6c08000
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 498.039 MHz processor
[    0.008023] Calibrating delay loop (skipped), value calculated using timer frequency.. 996.07 BogoMIPS (lpj=1992156)
[    0.008042] pid_max: default: 32768 minimum: 301
[    0.008110] ACPI: Core revision 20140424
[    0.019963] ACPI: All ACPI Tables successfully acquired
[    0.019988] ACPI: setting ELCR to 0200 (from 0c20)
[    0.020095] Security Framework initialized
[    0.020141] AppArmor: AppArmor disabled by boot time parameter
[    0.020152] Yama: disabled by default; enable with sysctl kernel.yama.*
[    0.020219] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.020237] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.021448] Initializing cgroup subsys memory
[    0.021479] Initializing cgroup subsys devices
[    0.021533] Initializing cgroup subsys freezer
[    0.021558] Initializing cgroup subsys net_cls
[    0.021596] Initializing cgroup subsys blkio
[    0.021630] Initializing cgroup subsys perf_event
[    0.021649] Initializing cgroup subsys net_prio
[    0.021770] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
               Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
               tlb_flushall_shift: -1
[    0.021791] CPU: Geode(TM) Integrated Processor by AMD PCS (fam: 05, model: 0a, stepping: 02)
[    0.030905] ftrace: allocating 19730 entries in 39 pages
[    0.076367] Performance Events: no PMU driver, software events only.
[    0.088698] NMI watchdog: disabled (cpu0): hardware events not enabled
[    0.089114] devtmpfs: initialized
[    0.090539] PM: Registering ACPI NVS region [mem 0x37fb0000-0x37fb2fff] (12288 bytes)
[    0.101418] pinctrl core: initialized pinctrl subsystem
[    0.101861] NET: Registered protocol family 16
[    0.102854] EISA bus registered
[    0.102878] cpuidle: using governor ladder
[    0.102901] cpuidle: using governor menu
[    0.103536] ACPI: bus type PCI registered
[    0.103550] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.105511] PCI: PCI BIOS revision 2.10 entry at 0xfad30, last bus=0
[    0.105523] PCI: Using configuration type 1 for base access
[    0.112980] ACPI: Added _OSI(Module Device)
[    0.112996] ACPI: Added _OSI(Processor Device)
[    0.113009] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.113023] ACPI: Added _OSI(Processor Aggregator Device)
[    0.126938] ACPI: Interpreter enabled
[    0.127033] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[    0.127063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[    0.127092] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[    0.127139] ACPI: (supports S0 S1 S5)
[    0.127152] ACPI: Using PIC for interrupt routing
[    0.127283] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[    0.142694] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.142732] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    0.142780] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.143292] acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
[    0.143314] acpi PNP0A03:00: host bridge window [io  0x0d00-0xac17] (ignored)
[    0.143334] acpi PNP0A03:00: host bridge window [io  0xac20-0xffff] (ignored)
[    0.143355] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[    0.143376] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000dffff] (ignored)
[    0.143397] acpi PNP0A03:00: host bridge window [mem 0x40500000-0xfebfffff] (ignored)
[    0.143411] PCI: root bus 00: using default resources
[    0.143433] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    0.144335] PCI host bridge to bus 0000:00
[    0.144358] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.144378] pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
[    0.144399] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[    0.144542] pci 0000:00:01.0: [1022:2080] type 00 class 0x060000
[    0.144691] pci 0000:00:01.0: reg 0x10: [io  0xac1c-0xac1f]
[    0.144805] pci 0000:00:01.0: reg 0x14: [io  0x9e00-0x9e07]
[    0.146020] pci 0000:00:01.1: [1022:2081] type 00 class 0x030000
[    0.146320] pci 0000:00:01.1: reg 0x10: [mem 0xd0000000-0xdfffffff]
[    0.146535] pci 0000:00:01.1: reg 0x14: [mem 0xefff0000-0xefff3fff]
[    0.146749] pci 0000:00:01.1: reg 0x18: [mem 0xeffec000-0xeffeffff]
[    0.146963] pci 0000:00:01.1: reg 0x1c: [mem 0xeffe8000-0xeffebfff]
[    0.147177] pci 0000:00:01.1: reg 0x20: [mem 0xefff8000-0xefffbfff]
[    0.148330] pci 0000:00:01.2: [1022:2082] type 00 class 0x101000
[    0.148589] pci 0000:00:01.2: reg 0x10: [mem 0xefff4000-0xefff7fff]
[    0.150325] pci 0000:00:0d.0: [10ec:8139] type 00 class 0x020000
[    0.150364] pci 0000:00:0d.0: reg 0x10: [io  0xfc00-0xfcff]
[    0.150393] pci 0000:00:0d.0: reg 0x14: [mem 0xeffff000-0xeffff0ff]
[    0.150485] pci 0000:00:0d.0: supports D1 D2
[    0.150504] pci 0000:00:0d.0: PME# supported from D1 D2 D3hot D3cold
[    0.150661] pci 0000:00:0d.0: System wakeup disabled by ACPI
[    0.151179] pci 0000:00:0f.0: [1022:2090] type 00 class 0x060100
[    0.151497] pci 0000:00:0f.0: reg 0x10: [io  0x6000-0x6007]
[    0.151762] pci 0000:00:0f.0: reg 0x14: [io  0x6100-0x61ff]
[    0.152020] pci 0000:00:0f.0: reg 0x18: [io  0x6200-0x623f]
[    0.152284] pci 0000:00:0f.0: reg 0x1c: [io  0x0000-0x001f]
[    0.152554] pci 0000:00:0f.0: reg 0x20: [io  0x9d00-0x9d7f]
[    0.152835] pci 0000:00:0f.0: reg 0x24: [io  0x9c00-0x9c3f]
[    0.153847] pci 0000:00:0f.2: [1022:209a] type 00 class 0x010180
[    0.154811] pci 0000:00:0f.2: reg 0x20: [io  0xff00-0xff0f]
[    0.155247] pci 0000:00:0f.2: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.155266] pci 0000:00:0f.2: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.155286] pci 0000:00:0f.2: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.155305] pci 0000:00:0f.2: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.156079] pci 0000:00:0f.3: [1022:2093] type 00 class 0x040100
[    0.156354] pci 0000:00:0f.3: reg 0x10: [io  0xfe00-0xfe7f]
[    0.158164] pci 0000:00:0f.4: [1022:2094] type 00 class 0x0c0310
[    0.158570] pci 0000:00:0f.4: reg 0x10: [mem 0xefffe000-0xefffefff]
[    0.160179] pci 0000:00:0f.4: PME# supported from D0 D3hot D3cold
[    0.160471] pci 0000:00:0f.4: System wakeup disabled by ACPI
[    0.161053] pci 0000:00:0f.5: [1022:2095] type 00 class 0x0c0320
[    0.161414] pci 0000:00:0f.5: reg 0x10: [mem 0xefffd000-0xefffdfff]
[    0.163006] pci 0000:00:0f.5: PME# supported from D0 D3hot D3cold
[    0.163294] pci 0000:00:0f.5: System wakeup disabled by ACPI
[    0.163777] pci_bus 0000:00: on NUMA node 0
[    0.165002] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.165888] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 10 *11)
[    0.166619] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 11) *0, disabled.
[    0.167501] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 11) *0
[    0.169517] ACPI: Enabled 2 GPEs in block 00 to 1F
[    0.170470] vgaarb: setting as boot device: PCI:0000:00:01.1
[    0.170488] vgaarb: device added: PCI:0000:00:01.1,decodes=io+mem,owns=io+mem,locks=none
[    0.170505] vgaarb: loaded
[    0.170518] vgaarb: bridge control possible 0000:00:01.1
[    0.170996] PCI: Using ACPI for IRQ routing
[    0.171010] PCI: pci_cache_line_size set to 32 bytes
[    0.171455] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.171471] e820: reserve RAM buffer [mem 0x37fb0000-0x37ffffff]
[    0.172732] Switched to clocksource pit
[    0.214245] pnp: PnP ACPI init
[    0.214367] ACPI: bus type PNP registered
[    0.215176] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.215201] system 00:00: [mem 0x37fb0000-0x37fbffff] could not be reserved
[    0.215225] system 00:00: [mem 0xffff0000-0xffffffff] has been reserved
[    0.215247] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.215327] system 00:00: [mem 0x00100000-0x37faffff] could not be reserved
[    0.215350] system 00:00: [mem 0x40400000-0x4043ffff] has been reserved
[    0.215373] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.215399] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.216720] pnp 00:01: disabling [io  0x0010-0x001f] because it overlaps 0000:00:0f.0 BAR 3 [io  0x0000-0x001f]
[    0.217030] system 00:01: [io  0x04d0-0x04d1] has been reserved
[    0.217053] system 00:01: [io  0x0480-0x048f] has been reserved
[    0.217077] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.217379] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.217433] pnp: PnP ACPI: found 3 devices
[    0.217444] ACPI: bus type PNP unregistered
[    0.217472] PnPBIOS: Disabled
[    0.267872] Switched to clocksource acpi_pm
[    0.267953] pci 0000:00:0f.0: BAR 3: assigned [io  0x1000-0x101f]
[    0.268046] pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
[    0.268067] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[    0.268193] NET: Registered protocol family 2
[    0.269857] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
[    0.270025] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[    0.270173] TCP: Hash tables configured (established 8192 bind 8192)
[    0.270355] TCP: reno registered
[    0.270372] UDP hash table entries: 512 (order: 1, 8192 bytes)
[    0.270414] UDP-Lite hash table entries: 512 (order: 1, 8192 bytes)
[    0.270670] NET: Registered protocol family 1
[    0.270830] pci 0000:00:01.1: Video device with shadowed ROM
[    0.273379] ACPI: PCI Interrupt Link [LNKD] BIOS reported IRQ 0, using IRQ 11
[    0.273394] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[    0.273407] PCI: setting IRQ 11 as level-triggered
[    0.344906] PCI: CLS 32 bytes, default 32
[    0.345212] Unpacking initramfs...
[    4.619178] Freeing initrd memory: 24052K (f50f6000 - f6873000)
[    4.619898] microcode: AMD CPU family 0x5 not supported
[    4.620556] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd0000000, 0x1d5000 bytes, mapped to 0xf8080000
[    4.620581] simple-framebuffer simple-framebuffer.0: format=x8r8g8b8, mode=800x600x32, linelength=3200
[    4.648098] Console: switching to colour frame buffer device 100x37
[    4.674886] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    4.676661] futex hash table entries: 256 (order: -1, 3072 bytes)
[    4.676793] audit: initializing netlink subsys (disabled)
[    4.676875] audit: type=2000 audit(1461232578.675:1): initialized
[    4.678623] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[    4.678742] zbud: loaded
[    4.680883] VFS: Disk quotas dquot_6.5.2
[    4.680944] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    4.681225] msgmni has been set to 1745
[    4.683969] alg: No test for stdrng (krng)
[    4.684194] bounce: pool size: 64 pages
[    4.684273] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[    4.684514] io scheduler noop registered
[    4.684536] io scheduler deadline registered
[    4.684773] io scheduler cfq registered (default)
[    4.685502] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    4.685671] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    4.685959] GHES: HEST is not enabled!
[    4.686115] isapnp: Scanning for PnP cards...
[    5.041331] isapnp: No Plug & Play device found
[    5.041671] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.044488] Linux agpgart interface v0.103
[    5.046050] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    5.923525] i8042: Can't read CTR while initializing i8042
[    5.924093] tsc: Refined TSC clocksource calibration: 498.050 MHz
[    5.924119] Switched to clocksource tsc
[    5.924222] i8042: probe of i8042 failed with error -5
[    5.924905] mousedev: PS/2 mouse device common for all mice
[    5.925858] rtc_cmos 00:02: RTC can wake from S4
[    5.926384] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    5.926447] rtc_cmos 00:02: alarms up to one day, 242 bytes nvram
[    5.926817] platform eisa.0: Probing EISA bus 0
[    5.926850] platform eisa.0: Cannot allocate resource for EISA slot 1
[    5.926915] platform eisa.0: Cannot allocate resource for EISA slot 6
[    5.926956] platform eisa.0: EISA: Detected 0 cards
[    5.926998] ledtrig-cpu: registered to indicate activity on CPUs
[    5.929414] TCP: cubic registered
[    5.929482] NET: Registered protocol family 10
[    5.930600] mip6: Mobile IPv6
[    5.930626] NET: Registered protocol family 17
[    5.930670] mpls_gso: MPLS GSO support
[    5.930938] Using IPI Shortcut mode
[    5.931791] registered taskstats version 1
[    5.933334] rtc_cmos 00:02: setting system clock to 2016-04-21 09:56:20 UTC (1461232580)
[    5.933734] PM: Hibernation image not present or could not be loaded.
[    5.934826] Freeing unused kernel memory: 672K (c1607000 - c16af000)
[    5.934905] Write protecting the kernel text: 4260k
[    5.935146] Write protecting the kernel read-only data: 1400k
[    7.068501] random: systemd-udevd urandom read with 25 bits of entropy available
[    7.215978] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    7.216008] ACPI: Power Button [PWRB]
[    7.228813] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    7.228842] ACPI: Sleep Button [SLPB]
[    7.229362] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    7.229382] ACPI: Power Button [PWRF]
[    7.314630] 8139cp: 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004)
[    7.314724] 8139cp 0000:00:0d.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip, use 8139too
[    7.337582] 8139too: 8139too Fast Ethernet driver 0.9.28
[    7.339922] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[    7.361239] 8139too 0000:00:0d.0 eth0: RealTek RTL8139 at 0x0001fc00, 00:40:ca:9d:f0:50, IRQ 11
[    7.387243] ACPI: bus type USB registered
[    7.387488] usbcore: registered new interface driver usbfs
[    7.387603] usbcore: registered new interface driver hub
[    7.392189] SCSI subsystem initialized
[    7.398404] usbcore: registered new device driver usb
[    7.402217] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.403353] ehci-pci: EHCI PCI platform driver
[    7.403924] ehci-pci 0000:00:0f.5: EHCI Host Controller
[    7.403969] ehci-pci 0000:00:0f.5: new USB bus registered, assigned bus number 1
[    7.406949] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.413487] ehci-pci 0000:00:0f.5: irq 11, io mem 0xefffd000
[    7.424632] ehci-pci 0000:00:0f.5: USB 2.0 started, EHCI 1.00
[    7.424907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.424927] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.424946] usb usb1: Product: EHCI Host Controller
[    7.424964] usb usb1: Manufacturer: Linux 3.16.0-4-586 ehci_hcd
[    7.424982] usb usb1: SerialNumber: 0000:00:0f.5
[    7.427456] hub 1-0:1.0: USB hub found
[    7.427513] hub 1-0:1.0: 4 ports detected
[    7.434868] ohci-pci: OHCI PCI platform driver
[    7.435416] ohci-pci 0000:00:0f.4: OHCI PCI host controller
[    7.435461] ohci-pci 0000:00:0f.4: new USB bus registered, assigned bus number 2
[    7.435567] ohci-pci 0000:00:0f.4: irq 11, io mem 0xefffe000
[    7.456068] libata version 3.00 loaded.
[    7.502407] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[    7.502433] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.502452] usb usb2: Product: OHCI PCI host controller
[    7.502470] usb usb2: Manufacturer: Linux 3.16.0-4-586 ohci_hcd
[    7.502488] usb usb2: SerialNumber: 0000:00:0f.4
[    7.505701] hub 2-0:1.0: USB hub found
[    7.507827] hub 2-0:1.0: 4 ports detected
[    7.521094] scsi0 : pata_cs5536
[    7.526154] scsi1 : pata_cs5536
[    7.526695] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
[    7.526709] ata2: DUMMY
[    7.685845] ata1.00: ATA-7: FUJITSU MHW2040AT, 0000000B, max UDMA/100
[    7.685869] ata1.00: 78140160 sectors, multi 16: LBA 
[    7.700507] ata1.00: configured for UDMA/100
[    7.700984] scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHW2040A 000B PQ: 0 ANSI: 5
[    7.742028] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[    7.742285] sd 0:0:0:0: [sda] Write Protect is off
[    7.742307] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    7.742419] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    7.851223]  sda: sda1 sda2 < sda5 >
[    7.856516] sd 0:0:0:0: [sda] Attached SCSI disk
[    7.988108] usb 2-3: new low-speed USB device number 2 using ohci-pci
[    8.197353] usb 2-3: New USB device found, idVendor=046d, idProduct=c00e
[    8.197378] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.197397] usb 2-3: Product: USB-PS/2 Optical Mouse
[    8.197414] usb 2-3: Manufacturer: Logitech
[    8.222309] hidraw: raw HID events driver (C) Jiri Kosina
[    8.239408] usbcore: registered new interface driver usbhid
[    8.239425] usbhid: USB HID core driver
[    8.247450] input: Logitech USB-PS/2 Optical Mouse as /devices/pci0000:00/0000:00:0f.4/usb2/2-3/2-3:1.0/0003:046D:C00E.0001/input/input3
[    8.249581] hid-generic 0003:046D:C00E.0001: input,hidraw0: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0f.4-3/input0
[   16.648949] PM: Starting manual resume from disk
[   16.648978] PM: Hibernation image partition 8:5 present
[   16.648989] PM: Looking for hibernation image.
[   16.649501] PM: Image not found (code -22)
[   16.649515] PM: Hibernation image not present or could not be loaded.
[   16.911259] random: nonblocking pool is initialized
[   17.324751] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[   19.818230] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   19.819031] systemd[1]: Detected architecture x86.
[   19.837826] systemd[1]: Set hostname to <geode>.
[   26.678761] systemd[1]: Reached target User and Group Name Lookups.
[   26.679629] systemd[1]: Listening on Journal Socket.
[   26.680442] systemd[1]: Listening on Journal Audit Socket.
[   26.680738] systemd[1]: Listening on Journal Socket (/dev/log).
[   26.680972] systemd[1]: Listening on udev Kernel Socket.
[   26.681108] systemd[1]: Reached target Remote File Systems (Pre).
[   26.681232] systemd[1]: Reached target Remote File Systems.
[   26.681514] systemd[1]: Listening on udev Control Socket.
[   26.688380] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   26.688544] systemd[1]: Reached target System Time Synchronized.
[   26.688796] systemd[1]: Listening on fsck to fsckd communication Socket.
[   26.689014] systemd[1]: Listening on Syslog Socket.
[   26.689886] systemd[1]: Created slice System Slice.
[   26.697057] systemd[1]: Mounting POSIX Message Queue File System...
[   26.735988] systemd[1]: Starting Set the console keyboard layout...
[   26.745996] systemd[1]: Mounting Debug File System...
[   26.755778] systemd[1]: Starting Remount Root and Kernel File Systems...
[   26.783393] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   26.787128] systemd[1]: Mounting Huge Pages File System...
[   26.806855] systemd[1]: Starting Journal Service...
[   26.882493] systemd[1]: Starting Load Kernel Modules...
[   26.882863] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   26.883619] systemd[1]: Created slice User and Session Slice.
[   26.883780] systemd[1]: Reached target Slices.
[   26.883928] systemd[1]: Reached target Encrypted Volumes.
[   26.885329] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   27.224844] systemd[1]: Started Create list of required static device nodes for the current kernel.
[   27.235782] systemd[1]: Starting Create Static Device Nodes in /dev...
[   27.810191] lp: driver loaded but no devices found
[   27.854909] ppdev: user-space parallel port driver
[   28.291779] systemd[1]: Started Create Static Device Nodes in /dev.
[   28.310195] systemd[1]: Starting udev Kernel Device Manager...
[   28.339521] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   28.387122] systemd[1]: Mounted Debug File System.
[   28.396984] systemd[1]: Mounted Huge Pages File System.
[   28.404496] systemd[1]: Mounted POSIX Message Queue File System.
[   28.424376] systemd[1]: Started Remount Root and Kernel File Systems.
[   28.538398] systemd[1]: Started Load Kernel Modules.
[   28.654358] systemd[1]: Started Journal Service.
[   29.836451] systemd-journald[167]: Received request to flush runtime journal from PID 1
[   31.402765] ACPI: AC Adapter [AC] (on-line)
[   31.721549] AMD Geode RNG detected
[   31.738223] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[   31.738243] PCI: setting IRQ 10 as level-triggered
[   31.938503] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   32.137384] Geode LX AES 0000:00:01.2: GEODE AES engine enabled.
[   32.138288] ACPI Warning: SystemIO range 0x0000000000006100-0x00000000000061FF conflicts with OpRegion 0x0000000000006100-0x00000000000061FF (\_SB_.GPIO) (20140424/utaddress-254)
[   32.138334] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   32.138481] cs5535-mfd 0000:00:0f.0: MFD add devices failed: -16
[   32.139067] cs5535-mfd: probe of 0000:00:0f.0 failed with error -16
[   34.724018] Adding 1646624k swap on /dev/sda5.  Priority:-1 extents:1 across:1646624k FS
[   51.306212] warning: process `ntpd' used the deprecated sysctl system call with 1.40.6.
[   54.629510] 8139too 0000:00:0d.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[  124.619944] snd-malloc: invalid device type 0
[  124.625796] snd-malloc: invalid device type 0
[  124.637583] snd-malloc: invalid device type 0
[  124.642127] snd-malloc: invalid device type 0
[  124.933192] snd-malloc: invalid device type 0
[  124.934499] snd-malloc: invalid device type 0
[  124.937701] snd-malloc: invalid device type 0
[  124.942995] snd-malloc: invalid device type 0

Reply to: