Bug#820890: linux-image-4.4.0-1-amd64: mount /dev/fd0 says: /dev/fd0 is not a valid block device
Package: src:linux
Version: 4.4.6-1
Severity: normal
Dear Maintainer,
after upgrading to the new kernel in my kvm I can not mount a floppy.
I do not know what the last working kernel was, because I carelessly deleted the old kernel after upgrading.
But I have installed the kernel from jessie: linux-image-3.16.0-4-amd64 3.16.7-ckt25-1 and when booting this kernel,
mounting floppy works again.
-- Package-specific info:
** Version:
Linux version 4.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160307 (Debian 5.3.1-11) ) #1 SMP Debian 4.4.6-1 (2016-03-17)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.4.0-1-amd64 root=UUID=16ae2efa-8fbc-49d8-ab08-6cf3fc547d08 ro quiet
** Not tainted
** Kernel log:
[ 34.120161] 0 90 4294900074
[ 34.120163] 1 90 4294900074
[ 34.120164] 2 90 4294900074
[ 34.120166] 12 90 4294900074
[ 34.120168] 1b 90 4294900074
[ 34.120169] ff 90 4294900117
[ 34.120171] last result at 4294900074
[ 34.120172] last redo_fd_request at 4294900074
[ 34.120176] 20 00 .
[ 34.120205] status=f0
[ 34.120207] fdc_busy=1
[ 34.120212] do_floppy=main_command_interrupt [floppy]
[ 34.120215] delayed work.function=ffffffffa0138240 expires=16
[ 34.120217] cont=ffffffffa0140460
[ 34.120219] current_req=ffff88007adc1b90
[ 34.120221] command_status=-1
[ 34.120238] floppy0: floppy timeout called
[ 34.120249] blk_update_request: I/O error, dev fd0, sector 0
[ 34.120338] floppy: error -5 while reading block 0
[ 844.504124] floppy driver state
[ 844.504126] -------------------
[ 844.504141] now=4295103422 last interrupt=4295102581 diff=841 last called handler=recal_interrupt [floppy]
[ 844.504143] timeout_message=floppy start
[ 844.504145] last output bytes:
[ 844.504147] 0 90 4295102581
[ 844.504149] 13 80 4295102581
[ 844.504151] 0 90 4295102581
[ 844.504153] 1a 90 4295102581
[ 844.504154] 0 90 4295102581
[ 844.504156] 3 80 4295102581
[ 844.504158] c1 90 4295102581
[ 844.504159] 11 90 4295102581
[ 844.504161] 7 80 4295102581
[ 844.504163] 8 80 4295102581
[ 844.504165] 0 90 4295102581
[ 844.504166] e6 80 4295102676
[ 844.504168] 0 90 4295102676
[ 844.504170] 0 90 4295102676
[ 844.504171] 0 90 4295102676
[ 844.504173] 1 90 4295102676
[ 844.504175] 2 90 4295102676
[ 844.504176] 12 90 4295102676
[ 844.504178] 1b 90 4295102676
[ 844.504180] ff 90 4295102718
[ 844.504181] last result at 4295102581
[ 844.504183] last redo_fd_request at 4295102581
[ 844.504187] 20 00 .
[ 844.504215] status=f0
[ 844.504217] fdc_busy=1
[ 844.504223] do_floppy=main_command_interrupt [floppy]
[ 844.504225] delayed work.function=ffffffffa0138240 expires=21
[ 844.504227] cont=ffffffffa0140460
[ 844.504229] current_req=ffff88007adc18b0
[ 844.504231] command_status=-1
[ 844.504248] floppy0: floppy timeout called
[ 844.504258] blk_update_request: I/O error, dev fd0, sector 0
[ 844.504350] floppy: error -5 while reading block 0
[ 847.512122] floppy driver state
[ 847.512124] -------------------
[ 847.512138] now=4295104174 last interrupt=4295103422 diff=752 last called handler=recal_interrupt [floppy]
[ 847.512140] timeout_message=floppy start
[ 847.512142] last output bytes:
[ 847.512144] 0 90 4295103422
[ 847.512146] 13 80 4295103422
[ 847.512148] 0 90 4295103422
[ 847.512150] 1a 90 4295103422
[ 847.512151] 0 90 4295103422
[ 847.512153] 3 80 4295103422
[ 847.512155] c1 90 4295103422
[ 847.512156] 11 90 4295103422
[ 847.512158] 7 80 4295103422
[ 847.512160] 8 80 4295103422
[ 847.512161] 0 90 4295103422
[ 847.512163] e6 80 4295103422
[ 847.512165] 0 90 4295103422
[ 847.512167] 0 90 4295103422
[ 847.512168] 0 90 4295103422
[ 847.512170] 1 90 4295103422
[ 847.512172] 2 90 4295103422
[ 847.512173] 12 90 4295103422
[ 847.512175] 1b 90 4295103422
[ 847.512177] ff 90 4295103459
[ 847.512178] last result at 4295103422
[ 847.512180] last redo_fd_request at 4295103422
[ 847.512200] 20 00 .
[ 847.512228] status=f0
[ 847.512230] fdc_busy=1
[ 847.512236] do_floppy=main_command_interrupt [floppy]
[ 847.512238] delayed work.function=ffffffffa0138240 expires=10
[ 847.512240] cont=ffffffffa0140460
[ 847.512242] current_req=ffff88007adc18b0
[ 847.512244] command_status=-1
[ 847.512261] floppy0: floppy timeout called
[ 847.512272] blk_update_request: I/O error, dev fd0, sector 0
[ 847.512357] floppy: error -5 while reading block 0
** Model information
sys_vendor: Bochs
product_name: Bochs
product_version:
chassis_vendor: Bochs
chassis_version:
bios_vendor: Bochs
bios_version: Bochs
** Loaded modules:
snd_hda_codec_generic
hid_generic
ppdev
snd_hda_intel
cirrus
pcspkr
snd_hda_codec
joydev
evdev
snd_hda_core
serio_raw
ttm
snd_hwdep
virtio_console
virtio_balloon
drm_kms_helper
snd_pcm
snd_timer
snd
soundcore
drm
i2c_piix4
sg
acpi_cpufreq
usbhid
8250_fintek
parport_pc
hid
parport
tpm_tis
tpm
processor
button
drbd
lru_cache
libcrc32c
crc32c_generic
autofs4
overlay
ext4
crc16
mbcache
jbd2
sr_mod
cdrom
ata_generic
virtio_blk
virtio_net
psmouse
ata_piix
uhci_hcd
floppy
ehci_hcd
virtio_pci
virtio_ring
virtio
usbcore
usb_common
libata
scsi_mod
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010] (prog-if 80 [Master])
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at c0c0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: ata_piix, ata_generic
00:01.2 USB controller [0c03]: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II] [8086:7020] (rev 01) (prog-if 00 [UHCI])
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 11
Region 4: I/O ports at c040 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci_hcd
00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 03)
Subsystem: Red Hat, Inc Qemu virtual machine [1af4:1100]
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Kernel driver in use: piix4_smbus
Kernel modules: i2c_piix4
00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8] (prog-if 00 [VGA controller])
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Physical Slot: 2
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at fc000000 (32-bit, prefetchable) [size=32M]
Region 1: Memory at febf4000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at febd0000 [disabled] [size=64K]
Kernel driver in use: cirrus
Kernel modules: cirrusfb, cirrus
00:03.0 Ethernet controller [0200]: Red Hat, Inc Virtio network device [1af4:1000]
Subsystem: Red Hat, Inc Virtio network device [1af4:0001]
Physical Slot: 3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at c060 [size=32]
Region 1: Memory at febf5000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at febe0000 [disabled] [size=64K]
Capabilities: [40] MSI-X: Enable+ Count=3 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:04.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 01)
Subsystem: Red Hat, Inc QEMU Virtual Machine [1af4:1100]
Physical Slot: 4
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at febf0000 (32-bit, non-prefetchable) [size=16K]
Capabilities: [50] MSI: Enable+ Count=1/1 Maskable- 64bit+
Address: 00000000fee0100c Data: 41b1
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:05.0 SCSI storage controller [0100]: Red Hat, Inc Virtio block device [1af4:1001]
Subsystem: Red Hat, Inc Virtio block device [1af4:0002]
Physical Slot: 5
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at c000 [size=64]
Region 1: Memory at febf6000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI-X: Enable+ Count=2 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:06.0 Unclassified device [00ff]: Red Hat, Inc Virtio memory balloon [1af4:1002]
Subsystem: Red Hat, Inc Virtio memory balloon [1af4:0005]
Physical Slot: 6
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 10
Region 0: I/O ports at c080 [size=32]
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
00:07.0 Communication controller [0780]: Red Hat, Inc Virtio console [1af4:1003]
Subsystem: Red Hat, Inc Virtio console [1af4:0003]
Physical Slot: 7
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at c0a0 [size=32]
Region 1: Memory at febf7000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [40] MSI-X: Enable+ Count=32 Masked-
Vector table: BAR=1 offset=00000000
PBA: BAR=1 offset=00000800
Kernel driver in use: virtio-pci
Kernel modules: virtio_pci
** USB devices:
Bus 001 Device 002: ID 0627:0001 Adomax Technology Co., Ltd
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (500, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.4.0-1-amd64 (SMP w/1 CPU core)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.4.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.59
ii initramfs-tools [linux-initramfs-tool] 0.123
ii kmod 22-1.1
ii linux-base 4.0
Versions of packages linux-image-4.4.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.1.0-2
Versions of packages linux-image-4.4.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-36
pn linux-doc-4.4 <none>
Versions of packages linux-image-4.4.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.4.0-1-amd64/prerm/removing-running-kernel-4.4.0-1-amd64: true
Reply to: