[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#819222: linux-image-4.4.0-1-amd64: No sound at all after upgrading to this (4.4) kernel



Package: src:linux
Version: 4.4.6-1
Severity: important

Dear Maintainer,

the system does not see my soundcard (SB Audigy2) at all after having been upgraded to the 4.4 kernel.
So, no sound at all.
I also have this message every boot:
modprobe: module microcode not found in modules.dep


-- Package-specific info:
** Version:
Linux version 4.4.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20160307 (Debian 5.3.1-11) ) #1 SMP Debian 4.4.6-1 (2016-03-17)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.4.0-1-amd64 root=UUID=1773ae97-0143-4a04-a402-62fb96e1d4c0 ro quiet

** Not tainted

** Kernel log:
[    5.707741] AMD64 EDAC driver v3.4.0
[    5.707770] EDAC amd64: DRAM ECC disabled.
[    5.707774] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[    5.759577] firewire_ohci 0000:03:07.2: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
[    5.798658] [drm] radeon kernel modesetting enabled.
[    5.813295] ppdev: user-space parallel port driver
[    5.827146] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    5.879543] usb 4-2: New USB device found, idVendor=045e, idProduct=0084
[    5.879551] usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.879556] usb 4-2: Product: Microsoft Basic Optical Mouse
[    5.879559] usb 4-2: Manufacturer: Microsoft
[    5.892463] CRAT table not found
[    5.892468] Finished initializing topology ret=0
[    5.892660] kfd kfd: Initialized module
[    5.923403] [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E5 0x148C:0x5450).
[    5.923426] [drm] register mmio base: 0xFBDE0000
[    5.923429] [drm] register mmio size: 131072
[    5.924192] ATOM BIOS: ROBSON
[    5.924265] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
[    5.924270] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
[    5.924273] [drm] Detected VRAM RAM=512M, BAR=256M
[    5.924275] [drm] RAM width 64bits DDR
[    5.924366] [TTM] Zone  kernel: Available graphics memory: 2025348 kiB
[    5.924371] [TTM] Initializing pool allocator
[    5.924381] [TTM] Initializing DMA pool allocator
[    5.924420] [drm] radeon: 512M of VRAM memory ready
[    5.924423] [drm] radeon: 1024M of GTT memory ready.
[    5.924447] [drm] Loading CEDAR Microcode
[    5.977387] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_pfp.bin
[    5.984923] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_me.bin
[    5.985107] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_rlc.bin
[    6.006272] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CEDAR_smc.bin
[    6.006283] [drm] Internal thermal controller with fan control
[    6.030144] [drm] radeon: dpm initialized
[    6.184437] radeon 0000:01:00.0: firmware: direct-loading firmware radeon/CYPRESS_uvd.bin
[    6.184509] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    6.185974] kvm: Nested Virtualization enabled
[    6.185981] kvm: Nested Paging enabled
[    6.186114] [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
[    6.191887] [drm] PCIE GART of 1024M enabled (table at 0x000000000025E000).
[    6.191985] radeon 0000:01:00.0: WB enabled
[    6.191989] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffff8800cb2eec00
[    6.191991] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffff8800cb2eec0c
[    6.192726] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c418 and cpu addr 0xffffc90000c1c418
[    6.192729] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    6.192730] [drm] Driver supports precise vblank timestamp query.
[    6.192732] radeon 0000:01:00.0: radeon: MSI limited to 32-bit
[    6.192821] radeon 0000:01:00.0: radeon: using MSI.
[    6.192849] [drm] radeon: irq initialized.
[    6.209077] [drm] ring test on 0 succeeded in 1 usecs
[    6.209083] [drm] ring test on 3 succeeded in 2 usecs
[    6.395371] [drm] ring test on 5 succeeded in 1 usecs
[    6.395382] [drm] UVD initialized successfully.
[    6.395491] firewire_core 0000:03:07.2: created device fw0: GUID 00023c0091045a9b, S400
[    6.395778] [drm] ib test on ring 0 succeeded in 0 usecs
[    6.395810] [drm] ib test on ring 3 succeeded in 0 usecs
[    6.775508] hidraw: raw HID events driver (C) Jiri Kosina
[    6.801707] usbcore: registered new interface driver usbhid
[    6.801714] usbhid: USB HID core driver
[    6.871586] Adding 939004k swap on /dev/sda6.  Priority:-1 extents:1 across:939004k FS
[    6.888333] input: Microsoft Microsoft Basic Optical Mouse as /devices/pci0000:00/0000:00:12.1/usb4/4-2/4-2:1.0/0003:045E:0084.0001/input/input5
[    6.888522] hid-generic 0003:045E:0084.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse] on usb-0000:00:12.1-2/input0
[    7.063511] [drm] ib test on ring 5 succeeded
[    7.064472] [drm] Radeon Display Connectors
[    7.064476] [drm] Connector 0:
[    7.064478] [drm]   HDMI-A-1
[    7.064480] [drm]   HPD2
[    7.064483] [drm]   DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
[    7.064485] [drm]   Encoders:
[    7.064487] [drm]     DFP1: INTERNAL_UNIPHY1
[    7.064489] [drm] Connector 1:
[    7.064490] [drm]   DVI-I-1
[    7.064492] [drm]   HPD4
[    7.064495] [drm]   DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
[    7.064496] [drm]   Encoders:
[    7.064498] [drm]     DFP2: INTERNAL_UNIPHY
[    7.064500] [drm]     CRT1: INTERNAL_KLDSCP_DAC1
[    7.064502] [drm] Connector 2:
[    7.064503] [drm]   VGA-1
[    7.064506] [drm]   DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
[    7.064507] [drm]   Encoders:
[    7.064509] [drm]     CRT2: INTERNAL_KLDSCP_DAC2
[    7.110976] [drm] fb mappable at 0xD045F000
[    7.110978] [drm] vram apper at 0xD0000000
[    7.110979] [drm] size 8294400
[    7.110980] [drm] fb depth is 24
[    7.110981] [drm]    pitch is 7680
[    7.111047] fbcon: radeondrmfb (fb0) is primary device
[    7.135284] Console: switching to colour frame buffer device 240x67
[    7.141820] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[    7.151529] [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
[    7.204738] r8169 0000:02:00.0 enp2s0: link down
[    7.204753] r8169 0000:02:00.0 enp2s0: link down
[    7.204798] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    8.359342] floppy0: no floppy controllers found
[    9.429868] r8169 0000:02:00.0 enp2s0: link up
[    9.429888] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   21.275927] fuse init (API version 7.23)

** Model information
sys_vendor: System manufacturer
product_name: System Product Name
product_version: System Version
chassis_vendor: Chassis Manufacture
chassis_version: Chassis Version
bios_vendor: American Megatrends Inc.
bios_version: 2801   
board_vendor: ASUSTeK Computer INC.
board_name: M3A78-CM
board_version: Rev X.0x

** Loaded modules:
fuse
hid_generic
usbhid
hid
kvm_amd
kvm
amdkfd
irqbypass
ppdev
radeon
ttm
ata_generic
edac_mce_amd
firewire_ohci
sr_mod
snd_hda_codec_hdmi
pcspkr
drm_kms_helper
firewire_core
edac_core
k10temp
crc_itu_t
drm
emu10k1_gp
gameport
pata_atiixp
cdrom
snd_hda_intel
r8169
snd_hda_codec
sg
i2c_algo_bit
mii
snd_hda_core
parport_pc
snd_hwdep
snd_pcm
snd_timer
snd
soundcore
parport
fjes
asus_atk0110
8250_fintek
tpm_infineon
ohci_pci
button
ehci_pci
acpi_cpufreq
ohci_hcd
sp5100_tco
ehci_hcd
shpchp
usbcore
i2c_piix4
usb_common
tpm_tis
tpm
processor
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
evdev
serio_raw
ahci
libahci
libata
scsi_mod

** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo
iface lo inet loopback

# The primary network interface
allow-hotplug enp2s0
iface enp2s0 inet dhcp
# This is an autoconfigured IPv6 interface
iface enp2s0 inet6 auto

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: enp2s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 00:24:8c:bd:cc:49 brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.5/24 brd 192.168.1.255 scope global enp2s0
       valid_lft forever preferred_lft forever
    inet6 fdec:cb30:dbe0:7500:224:8cff:febd:cc49/64 scope global mngtmpaddr dynamic 
       valid_lft 7055sec preferred_lft 3455sec
    inet6 fe80::224:8cff:febd:cc49/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
enp2s0: 1283957    1108    0    0    0     0          0         3   151095     939    0    0    0     0       0          0
    lo:   15380     180    0    0    0     0          0         0    15380     180    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    Forwarding: 2
    1287 total packets received
    0 forwarded
    0 incoming packets discarded
    1287 incoming packets delivered
    1054 requests sent out
    40 outgoing packets dropped
    40 dropped because of missing route
Icmp:
    82 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 82
    82 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 82
IcmpMsg:
        InType3: 82
        OutType3: 82
Tcp:
    25 active connections openings
    0 passive connection openings
    8 failed connection attempts
    2 connection resets received
    0 connections established
    1051 segments received
    809 segments send out
    9 segments retransmited
    0 bad segments received.
    12 resets sent
Udp:
    72 packets received
    82 packets to unknown port received.
    0 packet receive errors
    160 packets sent
    0 receive buffer errors
    0 send buffer errors
    IgnoredMulti: 14
UdpLite:
TcpExt:
    9 TCP sockets finished time wait in fast timer
    11 delayed acks sent
    855 packet headers predicted
    63 acknowledgments not containing data payload received
    18 predicted acknowledgments
    TCPTimeouts: 1
    TCPLossProbes: 1
    1 connections reset due to unexpected data
    2 connections reset due to early user close
    1 connections aborted due to timeout
    TCPRcvCoalesce: 88
    TCPAutoCorking: 8
    TCPOrigDataSent: 137
IpExt:
    InMcastPkts: 26
    OutMcastPkts: 28
    InBcastPkts: 8
    OutBcastPkts: 6
    InOctets: 1285037
    OutOctets: 146932
    InMcastOctets: 2854
    OutMcastOctets: 2934
    InBcastOctets: 952
    OutBcastOctets: 284
    InNoECTPkts: 1294


** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] RS780 Host Bridge [1022:9600]
	Subsystem: ASUSTeK Computer Inc. RS780 Host Bridge (M378A-CM Motherboard) [1043:82ee]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (ext gfx port 0) [1022:9603] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 24
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fbd00000-fbdfffff
	Prefetchable memory behind bridge: 00000000d0000000-00000000dfffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD] RS780 PCI to PCI bridge (PCIE port 2) [1022:9606] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 25
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fbe00000-fbefffff
	Prefetchable memory behind bridge: 00000000faf00000-00000000faffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode] [1002:4390] (prog-if 01 [AHCI 1.0])
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 22
	Region 0: I/O ports at b000 [size=8]
	Region 1: I/O ports at a000 [size=4]
	Region 2: I/O ports at 9000 [size=8]
	Region 3: I/O ports at 8000 [size=4]
	Region 4: I/O ports at 7000 [size=16]
	Region 5: Memory at fbcff800 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fbcfe000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at fbcfd000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at fbcff000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fbcfc000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fbcfb000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 19
	Region 0: Memory at fbcfa800 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci
	Kernel modules: ehci_pci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 3a)
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort+ <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: piix4_smbus
	Kernel modules: i2c_piix4, sp5100_tco

00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Interrupt: pin A routed to IRQ 16
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at ff00 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: pata_atiixp
	Kernel modules: pata_atiixp, ata_generic

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
	I/O behind bridge: 0000e000-0000efff
	Memory behind bridge: fbf00000-fbffffff
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82ef]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at fbcf9000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci
	Kernel modules: ohci_pci

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor HyperTransport Configuration [1022:1200]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Address Map [1022:1201]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor DRAM Controller [1022:1202]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Kernel modules: amd64_edac_mod

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Miscellaneous Control [1022:1203]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel modules: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 10h Processor Link Control [1022:1204]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Robson LE [Radeon HD 6330M] [1002:68e5] (prog-if 00 [VGA controller])
	Subsystem: Tul Corporation / PowerColor Cedar [Radeon HD 5450] [148c:5450]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
	Region 2: Memory at fbde0000 (64-bit, non-prefetchable) [size=128K]
	Region 4: I/O ports at c000 [size=256]
	Expansion ROM at fbdc0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: radeon
	Kernel modules: radeon

01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Cedar HDMI Audio [Radeon HD 5400/6300 Series] [1002:aa68]
	Subsystem: Tul Corporation / PowerColor Cedar HDMI Audio [Radeon HD 5400/6300 Series] [148c:aa68]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 27
	Region 0: Memory at fbdbc000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
	Subsystem: ASUSTeK Computer Inc. M3A78-EH Motherboard [1043:82c6]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 26
	Region 0: I/O ports at d800 [size=256]
	Region 2: Memory at fbeff000 (64-bit, non-prefetchable) [size=4K]
	Region 4: Memory at faff0000 (64-bit, prefetchable) [size=64K]
	Expansion ROM at fbec0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: r8169
	Kernel modules: r8169

03:07.0 Multimedia audio controller [0401]: Creative Labs SB Audigy [1102:0004] (rev 04)
	Subsystem: Creative Labs SB Audigy2 Platinum [1102:1002]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 5000ns max)
	Interrupt: pin A routed to IRQ 0
	Region 0: I/O ports at ec00 [size=64]
	Capabilities: <access denied>

03:07.1 Input device controller [0980]: Creative Labs SB Audigy Game Port [1102:7003] (rev 04)
	Subsystem: Creative Labs SB Audigy2 MIDI/Game Port [1102:0060]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64
	Region 0: I/O ports at e880 [size=8]
	Capabilities: <access denied>
	Kernel driver in use: Emu10k1_gameport
	Kernel modules: emu10k1_gp

03:07.2 FireWire (IEEE 1394) [0c00]: Creative Labs SB Audigy FireWire Port [1102:4001] (rev 04) (prog-if 10 [OHCI])
	Subsystem: Creative Labs SB Audigy FireWire Port [1102:0010]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 22
	Region 0: Memory at fbfff800 (32-bit, non-prefetchable) [size=2K]
	Region 1: Memory at fbff8000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci
	Kernel modules: firewire_ohci


** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: stretch/sid
  APT prefers unstable
  APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)

Kernel: Linux 4.4.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.4.0-1-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.59
ii  initramfs-tools [linux-initramfs-tool]  0.123
ii  kmod                                    22-1
ii  linux-base                              4.0

Versions of packages linux-image-4.4.0-1-amd64 recommends:
ii  firmware-linux-free  3.4
ii  irqbalance           1.1.0-2

Versions of packages linux-image-4.4.0-1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-36
pn  linux-doc-4.4           <none>

Versions of packages linux-image-4.4.0-1-amd64 is related to:
pn  firmware-atheros                         <none>
pn  firmware-bnx2                            <none>
pn  firmware-bnx2x                           <none>
pn  firmware-brcm80211                       <none>
pn  firmware-intelwimax                      <none>
pn  firmware-ipw2x00                         <none>
pn  firmware-ivtv                            <none>
pn  firmware-iwlwifi                         <none>
pn  firmware-libertas                        <none>
pn  firmware-linux                           <none>
ii  firmware-linux-nonfree                   20160110-1
ii  firmware-misc-nonfree [firmware-ralink]  20160110-1
pn  firmware-myricom                         <none>
pn  firmware-netxen                          <none>
pn  firmware-qlogic                          <none>
pn  firmware-realtek                         <none>
pn  xen-hypervisor                           <none>

-- debconf information:
  linux-image-4.4.0-1-amd64/prerm/removing-running-kernel-4.4.0-1-amd64: true


Reply to: