Bug#819171: Info received (Bug#819171: linux-image-3.16.0-4-amd64: lvm cache cachepool kernel regression, lvm stops working when upgrading from 3.16.7-ckt11-1 to 3.16.7-ckt20-1)
I am trying to get support with lvm upstream and tried 4.5.0-040500 that
fails as well. I attached to full log boots of a the old working kernel
and a failing kernel.
GNU GRUB version 2.02~beta2-22+deb8u1
+----------------------------------------------------------------------------+
| Debian GNU/Linux, with Linux 4.5.0-040500-generic |
| Debian GNU/Linux, with Linux 4.5.0-040500-generic (sysvinit) |
| Debian GNU/Linux, with Linux 4.5.0-040500-generic (systemd) |
|*Debian GNU/Linux, with Linux 4.5.0-040500-generic (recovery mode) |
| Debian GNU/Linux, with Linux 4.3.0-0.bpo.1-amd64 |
| Debian GNU/Linux, with Linux 4.3.0-0.bpo.1-amd64 (sysvinit) |
| Debian GNU/Linux, with Linux 4.3.0-0.bpo.1-amd64 (systemd) |
| Debian GNU/Linux, with Linux 4.3.0-0.bpo.1-amd64 (recovery mode) |
| Debian GNU/Linux, with Linux 3.16.0-4-amd64 |
| Debian GNU/Linux, with Linux 3.16.0-4-amd64 (sysvinit) |
| Debian GNU/Linux, with Linux 3.16.0-4-amd64 (systemd) |
| Debian GNU/Linux, with Linux 3.16.0-4-amd64 (recovery mode) |v
+----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
Loading Linux 4.5.0-040500-generic ...
Loading initial ramdisk ...
[ 0.000000] Linux version 4.5.0-040500-generic (kernel@tangerine) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #201603140130 SMP Mon Mar 14 05:32:22 UTC 2016
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-040500-generic root=/dev/mapper/lvm0--vol-root ro single rootdelay=15 console=ttyS0,115200
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Legacy x87 FPU detected.
[ 0.000000] x86/fpu: Using 'lazy' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000923ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000092400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008c53efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008c53f000-0x000000008c611fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008c612000-0x000000008c710fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008c711000-0x000000008db10fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008db11000-0x000000008f601fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f602000-0x000000008f64efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008f64f000-0x000000008f6e5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f6e6000-0x000000008f6effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f6f0000-0x000000008f6f1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f6f2000-0x000000008f7cefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f7cf000-0x000000008f7fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f800000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a0000000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fcffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] e820: last_pfn = 0x170000 max_arch_pfn = 0x400000000
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x8c53f max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fdaa0-0x000fdaaf] mapped at [ffff8800000fdaa0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] RAMDISK: [mem 0x35b54000-0x36da1fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x000000008F7FD120 000094 (v01 INTEL S5520HC 00000000 01000013)
[ 0.000000] ACPI: FACP 0x000000008F7FB000 0000F4 (v04 INTEL S5520HC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: DSDT 0x000000008F7F4000 00657C (v02 INTEL S5520HC 00000003 MSFT 0100000D)
[ 0.000000] ACPI: FACS 0x000000008F6F2000 000040
[ 0.000000] ACPI: FACS 0x000000008F6F2000 000040
[ 0.000000] ACPI: APIC 0x000000008F7F3000 0001A8 (v02 INTEL S5520HC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: MCFG 0x000000008F7F2000 00003C (v01 INTEL S5520HC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: HPET 0x000000008F7F1000 000038 (v01 INTEL S5520HC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: SLIT 0x000000008F7F0000 000030 (v01 INTEL S5520HC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: SPCR 0x000000008F7EF000 000050 (v01 INTEL S5520HC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: WDDT 0x000000008F7EE000 000040 (v01 INTEL S5520HC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: SSDT 0x000000008F7D3000 01AFC4 (v02 INTEL SSDT PM 00004000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000008F7D2000 0001D8 (v02 INTEL IPMI 00004000 INTL 20061109)
[ 0.000000] ACPI: HEST 0x000000008F7D1000 0000A8 (v01 INTEL S5520HC 00000001 INTL 00000001)
[ 0.000000] ACPI: BERT 0x000000008F7D0000 000030 (v01 INTEL S5520HC 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 0x000000008F7CF000 000230 (v01 INTEL S5520HC 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 0x000000008F6F1000 000130 (v01 INTEL S5520HC 00000001 INTL 00000001)
[ 0.000000] ACPI: DMAR 0x000000008F6F0000 0001D0 (v01 INTEL S5520HC 00000001 MSFT 0100000D)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000016fffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x16fffa000-0x16fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000016fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000091fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000008c53efff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000016fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000016fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a401 base: 0xfed00000
[ 0.000000] smpboot: Allowing 24 CPUs, 12 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x00092fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00093000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c53f000-0x8c611fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c612000-0x8c710fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c711000-0x8db10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8db11000-0x8f601fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f602000-0x8f64efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f64f000-0x8f6e5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f6e6000-0x8f6effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f6f0000-0x8f6f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f6f2000-0x8f7cefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f7cf000-0x8f7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f800000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xafffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xb0000000-0xfbffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:24 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff88016b000000 s97624 r8192 d29352 u262144
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1017254
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.5.0-040500-generic root=/dev/mapper/lvm0--vol-root ro single rootdelay=15 console=ttyS0,115200
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Memory: 3961352K/4133696K available (8352K kernel code, 1299K rwdata, 4048K rodata, 1488K init, 1292K bss, 172344K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=24.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=24
[ 0.000000] NR_IRQS:16640 nr_irqs:1024 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2666.620 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 5333.24 BogoMIPS (lpj=10666480)
[ 0.011985] pid_max: default: 32768 minimum: 301
[ 0.017147] ACPI: Core revision 20160108
[ 0.034061] ACPI: 3 ACPI AML tables successfully acquired and loaded
[ 0.041166]
[ 0.042851] Security Framework initialized
[ 0.047426] Yama: becoming mindful.
[ 0.051326] AppArmor: AppArmor initialized
[ 0.056169] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.065321] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.073681] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.081168] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.089380] CPU: Physical Processor ID: 0
[ 0.093859] CPU: Processor Core ID: 0
[ 0.097952] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.104657] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.112528] mce: CPU supports 9 MCE banks
[ 0.117012] CPU0: Thermal monitoring enabled (TM1)
[ 0.122365] process: using mwait in idle threads
[ 0.127523] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.133647] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.140913] Freeing SMP alternatives memory: 32K (ffffffff820ba000 - ffffffff820c2000)
[ 0.155332] ftrace: allocating 31937 entries in 125 pages
[ 0.174667] DMAR: Host address width 40
[ 0.178953] DMAR: DRHD base: 0x000000fe710000 flags: 0x1
[ 0.184894] DMAR: dmar0: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.193735] DMAR: RMRR base: 0x0000008f62f000 end: 0x0000008f631fff
[ 0.200733] DMAR: RMRR base: 0x0000008f61a000 end: 0x0000008f61afff
[ 0.207731] DMAR: RMRR base: 0x0000008f617000 end: 0x0000008f617fff
[ 0.214727] DMAR: RMRR base: 0x0000008f614000 end: 0x0000008f614fff
[ 0.221715] DMAR: RMRR base: 0x0000008f611000 end: 0x0000008f611fff
[ 0.228713] DMAR: RMRR base: 0x0000008f60e000 end: 0x0000008f60efff
[ 0.235709] DMAR: RMRR base: 0x0000008f60b000 end: 0x0000008f60bfff
[ 0.242706] DMAR: RMRR base: 0x0000008f608000 end: 0x0000008f608fff
[ 0.249705] DMAR: RMRR base: 0x0000008f605000 end: 0x0000008f605fff
[ 0.256702] DMAR: ATSR flags: 0x0
[ 0.260397] DMAR-IR: IOAPIC id 8 under DRHD base 0xfe710000 IOMMU 0
[ 0.267492] DMAR-IR: IOAPIC id 9 under DRHD base 0xfe710000 IOMMU 0
[ 0.274900] DMAR-IR: Enabled IRQ remapping in xapic mode
[ 0.280835] Switched APIC routing to physical flat.
[ 0.286820] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.440527] smpboot: CPU0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (family: 0x6, model: 0x2c, stepping: 0x2)
[ 0.452321] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.461693] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.469365] ... version: 3
[ 0.473835] ... bit width: 48
[ 0.478402] ... generic registers: 4
[ 0.482873] ... value mask: 0000ffffffffffff
[ 0.488799] ... max period: 000000007fffffff
[ 0.494725] ... fixed-purpose events: 3
[ 0.499195] ... event mask: 000000070000000f
[ 0.505930] x86: Booting SMP configuration:
[ 0.510589] .... node #0, CPUs: #1
[ 0.518496] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.527717] #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.560142] x86: Booted up 1 node, 12 CPUs
[ 0.564919] smpboot: Total of 12 processors activated (63998.88 BogoMIPS)
[ 0.586418] devtmpfs: initialized
[ 0.592404] evm: security.selinux
[ 0.596100] evm: security.SMACK64
[ 0.599796] evm: security.SMACK64EXEC
[ 0.603879] evm: security.SMACK64TRANSMUTE
[ 0.608447] evm: security.SMACK64MMAP
[ 0.612529] evm: security.ima
[ 0.615835] evm: security.capability
[ 0.619893] PM: Registering ACPI NVS region [mem 0x8c53f000-0x8c611fff] (864256 bytes)
[ 0.628738] PM: Registering ACPI NVS region [mem 0x8c711000-0x8db10fff] (20971520 bytes)
[ 0.638019] PM: Registering ACPI NVS region [mem 0x8f6e6000-0x8f6effff] (40960 bytes)
[ 0.646760] PM: Registering ACPI NVS region [mem 0x8f6f2000-0x8f7cefff] (905216 bytes)
[ 0.655691] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.666631] pinctrl core: initialized pinctrl subsystem
[ 0.672564] RTC time: 13:53:01, date: 03/24/16
[ 0.677630] NET: Registered protocol family 16
[ 0.692529] cpuidle: using governor ladder
[ 0.702127] cpuidle: using governor menu
[ 0.706506] PCCT header not found.
[ 0.710375] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.718824] ACPI: bus type PCI registered
[ 0.723296] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.730566] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xa0000000-0xafffffff] (base 0xa0000000)
[ 0.740954] PCI: MMCONFIG at [mem 0xa0000000-0xafffffff] reserved in E820
[ 0.748539] PCI: Using configuration type 1 for base access
[ 0.762264] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.769354] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.776730] ACPI: Added _OSI(Module Device)
[ 0.781398] ACPI: Added _OSI(Processor Device)
[ 0.786355] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.791602] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.814052] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20160108/dsopcode-236)
[ 0.824552] ACPI Error: Method parse/execution failed [\_SB._OSC] (Node ffff88016acb4348), AE_AML_BUFFER_LIMIT (20160108/psparse-542)
[ 0.839323] ACPI: Interpreter enabled
[ 0.843419] ACPI: (supports S0 S1 S5)
[ 0.847503] ACPI: Using IOAPIC for interrupt routing
[ 0.853085] HEST: Table parsing has been initialized.
[ 0.858722] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.874901] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fd])
[ 0.881802] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.891052] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.899985] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.909284] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000cbfff window] (conflicts with Video ROM [mem 0x000c0000-0x000c7fff])
[ 0.924164] PCI host bridge to bus 0000:00
[ 0.928735] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.936309] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.943883] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.952234] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfedfffff window]
[ 0.960584] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfdffffff window]
[ 0.968933] pci_bus 0000:00: root bus resource [bus 00-fd]
[ 0.975314] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.981770] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 0.988219] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 0.994668] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 1.001123] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 1.009736] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.016221] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 1.022708] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 1.029227] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 1.035701] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.042176] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 1.048659] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.055143] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 1.061626] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 1.068144] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 1.074577] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.081001] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415]
[ 1.094007] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.101971] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 1.110420] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.118867] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask 001f)
[ 1.127897] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.134380] pci 0000:01:00.1: System wakeup disabled by ACPI
[ 1.141353] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.146988] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 1.152774] pci 0000:03:00.0: VF(n) BAR0 space: [mem 0xb3040000-0xb305ffff 64bit] (contains BAR0 for 8 VFs)
[ 1.163664] pci 0000:03:00.0: VF(n) BAR3 space: [mem 0xb3060000-0xb307ffff 64bit] (contains BAR3 for 8 VFs)
[ 1.174764] pci 0000:03:00.1: VF(n) BAR0 space: [mem 0xb3080000-0xb309ffff 64bit] (contains BAR0 for 8 VFs)
[ 1.185644] pci 0000:03:00.1: VF(n) BAR3 space: [mem 0xb30a0000-0xb30bffff 64bit] (contains BAR3 for 8 VFs)
[ 1.198119] pci 0000:00:05.0: PCI bridge to [bus 03-05]
[ 1.204197] pci 0000:06:00.0: VF(n) BAR0 space: [mem 0xb2440000-0xb245ffff 64bit] (contains BAR0 for 8 VFs)
[ 1.215085] pci 0000:06:00.0: VF(n) BAR3 space: [mem 0xb2460000-0xb247ffff 64bit] (contains BAR3 for 8 VFs)
[ 1.226188] pci 0000:06:00.1: VF(n) BAR0 space: [mem 0xb2480000-0xb249ffff 64bit] (contains BAR0 for 8 VFs)
[ 1.237074] pci 0000:06:00.1: VF(n) BAR3 space: [mem 0xb24a0000-0xb24bffff 64bit] (contains BAR3 for 8 VFs)
[ 1.249555] pci 0000:00:07.0: PCI bridge to [bus 06-08]
[ 1.256189] pci 0000:00:09.0: PCI bridge to [bus 09]
[ 1.261830] pci 0000:00:1c.0: PCI bridge to [bus 0a]
[ 1.274128] pci 0000:00:1c.4: PCI bridge to [bus 0b]
[ 1.279799] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
[ 1.287578] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 1.295808] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 1.304032] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 1.312255] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 1.320478] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.329978] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.339479] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.348979] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.358807] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 1.364263] vgaarb: setting as boot device: PCI:0000:0b:00.0
[ 1.370577] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.379607] vgaarb: loaded
[ 1.382624] vgaarb: bridge control possible 0000:0b:00.0
[ 1.388755] SCSI subsystem initialized
[ 1.392997] ACPI: bus type USB registered
[ 1.397485] usbcore: registered new interface driver usbfs
[ 1.403613] usbcore: registered new interface driver hub
[ 1.409563] usbcore: registered new device driver usb
[ 1.415339] PCI: Using ACPI for IRQ routing
[ 1.425398] PCI: Discovered peer bus ff
[ 1.429702] ACPI: \: failed to evaluate _DSM (0x1001)
[ 1.435337] PCI host bridge to bus 0000:ff
[ 1.439908] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 1.446804] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
[ 1.454671] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 1.464659] NetLabel: Initializing
[ 1.468453] NetLabel: domain hash size = 128
[ 1.473311] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.478861] NetLabel: unlabeled traffic allowed by default
[ 1.485143] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.490921] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.499460] clocksource: Switched to clocksource hpet
[ 1.510835] VFS: Disk quotas dquot_6.6.0
[ 1.515241] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.523007] AppArmor: AppArmor Filesystem Enabled
[ 1.528312] pnp: PnP ACPI init
[ 1.532037] system 00:01: [io 0x0500-0x057f] could not be reserved
[ 1.539036] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 1.546033] system 00:01: [io 0x0800-0x081f] has been reserved
[ 1.552642] system 00:01: [io 0x0ca2-0x0ca3] could not be reserved
[ 1.559627] system 00:01: [io 0x0600-0x061f] has been reserved
[ 1.566235] system 00:01: [io 0x0880-0x0883] has been reserved
[ 1.572843] system 00:01: [io 0x0ca4-0x0ca5] has been reserved
[ 1.579451] system 00:01: [mem 0xfed1c000-0xfed3fffe] could not be reserved
[ 1.587222] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.594994] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.602377] system 00:01: [mem 0xfe900000-0xfe90001f] has been reserved
[ 1.609760] system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved
[ 1.617143] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 1.624888] pnp: PnP ACPI: found 4 devices
[ 1.635610] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.645519] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffc00000-0xffffffff pref]: no compatible bridge window
[ 1.656587] pci 0000:03:00.1: can't claim BAR 6 [mem 0xffc00000-0xffffffff pref]: no compatible bridge window
[ 1.667654] pci 0000:06:00.0: can't claim BAR 6 [mem 0xffc00000-0xffffffff pref]: no compatible bridge window
[ 1.678722] pci 0000:06:00.1: can't claim BAR 6 [mem 0xffc00000-0xffffffff pref]: no compatible bridge window
[ 1.689790] pci 0000:09:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ 1.700858] pci 0000:0b:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 1.711982] pci 0000:00:1f.0: BAR 13: [io size 0x0080] has bogus alignment
[ 1.719771] pci 0000:00:1c.0: BAR 14: assigned [mem 0xb1900000-0xb1afffff]
[ 1.727448] pci 0000:00:1c.0: BAR 15: assigned [mem 0xb2500000-0xb26fffff 64bit pref]
[ 1.736189] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 1.743088] pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
[ 1.749986] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.755529] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.762322] pci 0000:00:01.0: bridge window [mem 0xb3200000-0xb32fffff]
[ 1.769903] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 1.775450] pci 0000:03:00.0: BAR 6: no space for [mem size 0x00400000 pref]
[ 1.783318] pci 0000:03:00.0: BAR 6: failed to assign [mem size 0x00400000 pref]
[ 1.791575] pci 0000:03:00.1: BAR 6: no space for [mem size 0x00400000 pref]
[ 1.799443] pci 0000:03:00.1: BAR 6: failed to assign [mem size 0x00400000 pref]
[ 1.807700] pci 0000:00:05.0: PCI bridge to [bus 03-05]
[ 1.813531] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
[ 1.820335] pci 0000:00:05.0: bridge window [mem 0xb2800000-0xb30fffff]
[ 1.827917] pci 0000:06:00.0: BAR 6: no space for [mem size 0x00400000 pref]
[ 1.835787] pci 0000:06:00.0: BAR 6: failed to assign [mem size 0x00400000 pref]
[ 1.844042] pci 0000:06:00.1: BAR 6: no space for [mem size 0x00400000 pref]
[ 1.851908] pci 0000:06:00.1: BAR 6: failed to assign [mem size 0x00400000 pref]
[ 1.860163] pci 0000:00:07.0: PCI bridge to [bus 06-08]
[ 1.865994] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 1.872799] pci 0000:00:07.0: bridge window [mem 0xb1c00000-0xb24fffff]
[ 1.880380] pci 0000:09:00.0: BAR 6: assigned [mem 0xb3140000-0xb317ffff pref]
[ 1.888441] pci 0000:00:09.0: PCI bridge to [bus 09]
[ 1.893982] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
[ 1.900786] pci 0000:00:09.0: bridge window [mem 0xb3100000-0xb31fffff]
[ 1.908369] pci 0000:00:1c.0: PCI bridge to [bus 0a]
[ 1.913912] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 1.920706] pci 0000:00:1c.0: bridge window [mem 0xb1900000-0xb1afffff]
[ 1.928286] pci 0000:00:1c.0: bridge window [mem 0xb2500000-0xb26fffff 64bit pref]
[ 1.936932] pci 0000:0b:00.0: BAR 6: assigned [mem 0xb1810000-0xb181ffff pref]
[ 1.944995] pci 0000:00:1c.4: PCI bridge to [bus 0b]
[ 1.950537] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
[ 1.957333] pci 0000:00:1c.4: bridge window [mem 0xb1000000-0xb18fffff]
[ 1.964911] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 1.973557] pci 0000:00:1e.0: PCI bridge to [bus 0c]
[ 1.979176] NET: Registered protocol family 2
[ 1.984218] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.992360] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.999833] TCP: Hash tables configured (established 32768 bind 32768)
[ 2.007147] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.013862] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 2.021125] NET: Registered protocol family 1
[ 2.027933] pci 0000:01:00.0: Disabling L0s
[ 2.032605] pci 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.040669] pci 0000:01:00.1: Disabling L0s
[ 2.045338] pci 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
[ 2.053486] Trying to unpack rootfs image as initramfs...
[ 2.387610] Freeing initrd memory: 18744K (ffff880035b54000 - ffff880036da2000)
[ 2.395844] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.403037] software IO TLB [mem 0x8853f000-0x8c53f000] (64MB) mapped at [ffff88008853f000-ffff88008c53efff]
[ 2.414255] Scanning for low memory corruption every 60 seconds
[ 2.421454] futex hash table entries: 8192 (order: 7, 524288 bytes)
[ 2.428588] audit: initializing netlink subsys (disabled)
[ 2.434628] audit: type=2000 audit(1458827581.160:1): initialized
[ 2.441713] Initialise system trusted keyring
[ 2.448239] zbud: loaded
[ 2.451631] fuse init (API version 7.24)
[ 2.456139] Key type big_key registered
[ 2.460766] Key type asymmetric registered
[ 2.465336] Asymmetric key parser 'x509' registered
[ 2.470826] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.479125] io scheduler noop registered
[ 2.483507] io scheduler deadline registered (default)
[ 2.489272] io scheduler cfq registered
[ 2.495109] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 2.502881] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.510167] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 2.517463] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 2.525245] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 2.533017] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 2.540305] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 2.547592] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 2.555355] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 2.562640] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 2.569935] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 2.577707] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 2.585013] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.592802] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 2.600574] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
[ 2.607868] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.614095] pciehp 0000:00:1c.0:pcie04: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[ 2.627824] pciehp 0000:00:1c.4:pcie04: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl- LLActRep+
[ 2.641542] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.649449] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[ 2.658776] ACPI: Sleep Button [SLPB]
[ 2.662909] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.671166] ACPI: Power Button [PWRF]
[ 2.677297] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 2.685657] pstore: Registered erst as persistent store backend
[ 2.692743] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[ 2.699907] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.727431] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.756103] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 2.766358] Linux agpgart interface v0.103
[ 2.775265] brd: module loaded
[ 2.780724] loop: module loaded
[ 2.784440] libphy: Fixed MDIO Bus: probed
[ 2.789016] tun: Universal TUN/TAP device driver, 1.6
[ 2.794654] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2.801646] PPP generic driver version 2.4.2
[ 2.806517] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.813809] ehci-pci: EHCI PCI platform driver
[ 2.818918] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 2.824757] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 2.833020] ehci-pci 0000:00:1a.7: debug port 1
[ 2.841980] ehci-pci 0000:00:1a.7: irq 19, io mem 0xb3322000
[ 2.859483] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 2.865947] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.873525] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.881587] usb usb1: Product: EHCI Host Controller
[ 2.887032] usb usb1: Manufacturer: Linux 4.5.0-040500-generic ehci_hcd
[ 2.894415] usb usb1: SerialNumber: 0000:00:1a.7
[ 2.899718] hub 1-0:1.0: USB hub found
[ 2.903909] hub 1-0:1.0: 6 ports detected
[ 2.908630] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 2.914470] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 2.922733] ehci-pci 0000:00:1d.7: debug port 1
[ 2.931700] ehci-pci 0000:00:1d.7: irq 16, io mem 0xb3321000
[ 2.947484] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 2.953924] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.961502] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.969563] usb usb2: Product: EHCI Host Controller
[ 2.975008] usb usb2: Manufacturer: Linux 4.5.0-040500-generic ehci_hcd
[ 2.982391] usb usb2: SerialNumber: 0000:00:1d.7
[ 2.987685] hub 2-0:1.0: USB hub found
[ 2.991874] hub 2-0:1.0: 6 ports detected
[ 2.996477] ehci-platform: EHCI generic platform driver
[ 3.002318] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.009220] ohci-pci: OHCI PCI platform driver
[ 3.014190] ohci-platform: OHCI generic platform driver
[ 3.020028] uhci_hcd: USB Universal Host Controller Interface driver
[ 3.027240] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 3.033076] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 3.041337] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 3.046797] uhci_hcd 0000:00:1a.0: irq 19, io base 0x000050e0
[ 3.053247] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.060826] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.068888] usb usb3: Product: UHCI Host Controller
[ 3.074333] usb usb3: Manufacturer: Linux 4.5.0-040500-generic uhci_hcd
[ 3.081719] usb usb3: SerialNumber: 0000:00:1a.0
[ 3.087010] hub 3-0:1.0: USB hub found
[ 3.091200] hub 3-0:1.0: 2 ports detected
[ 3.095862] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 3.101699] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 3.109959] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 3.115418] uhci_hcd 0000:00:1a.1: irq 19, io base 0x000050c0
[ 3.121865] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.129444] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.137507] usb usb4: Product: UHCI Host Controller
[ 3.142943] usb usb4: Manufacturer: Linux 4.5.0-040500-generic uhci_hcd
[ 3.150332] usb usb4: SerialNumber: 0000:00:1a.1
[ 3.155622] hub 4-0:1.0: USB hub found
[ 3.159810] hub 4-0:1.0: 2 ports detected
[ 3.164466] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 3.170302] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 3.178560] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 3.184018] uhci_hcd 0000:00:1a.2: irq 19, io base 0x000050a0
[ 3.190466] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.198046] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.206108] usb usb5: Product: UHCI Host Controller
[ 3.211552] usb usb5: Manufacturer: Linux 4.5.0-040500-generic uhci_hcd
[ 3.218936] usb usb5: SerialNumber: 0000:00:1a.2
[ 3.219534] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 3.231527] hub 5-0:1.0: USB hub found
[ 3.235725] hub 5-0:1.0: 2 ports detected
[ 3.240384] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.246222] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 3.254482] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 3.259941] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005080
[ 3.266390] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.273970] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.282032] usb usb6: Product: UHCI Host Controller
[ 3.287475] usb usb6: Manufacturer: Linux 4.5.0-040500-generic uhci_hcd
[ 3.294859] usb usb6: SerialNumber: 0000:00:1d.0
[ 3.300148] hub 6-0:1.0: USB hub found
[ 3.304336] hub 6-0:1.0: 2 ports detected
[ 3.308993] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.314830] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 3.323089] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 3.328547] uhci_hcd 0000:00:1d.1: irq 16, io base 0x00005060
[ 3.334993] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.342583] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.350653] usb usb7: Product: UHCI Host Controller
[ 3.356103] usb usb7: Manufacturer: Linux 4.5.0-040500-generic uhci_hcd
[ 3.363485] usb usb7: SerialNumber: 0000:00:1d.1
[ 3.368778] hub 7-0:1.0: USB hub found
[ 3.372969] hub 7-0:1.0: 2 ports detected
[ 3.377639] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.383486] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 3.391754] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 3.397243] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005040
[ 3.403699] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 3.411289] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.411541] tsc: Refined TSC clocksource calibration: 2666.634 MHz
[ 3.411542] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26701ee5f6c, max_idle_ns: 440795291485 ns
[ 3.419419] usb 1-3: New USB device found, idVendor=0951, idProduct=1665
[ 3.419420] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.419421] usb 1-3: Product: DataTraveler 2.0
[ 3.419422] usb 1-3: Manufacturer: Kingston
[ 3.419423] usb 1-3: SerialNumber: 50E549C342A7BE40496D004E
[ 3.468733] usb usb8: Product: UHCI Host Controller
[ 3.474177] usb usb8: Manufacturer: Linux 4.5.0-040500-generic uhci_hcd
[ 3.481570] usb usb8: SerialNumber: 0000:00:1d.2
[ 3.486907] hub 8-0:1.0: USB hub found
[ 3.491096] hub 8-0:1.0: 2 ports detected
[ 3.495696] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 4.529056] i8042: No controller found
[ 4.533251] clocksource: Switched to clocksource tsc
[ 4.533335] mousedev: PS/2 mouse device common for all mice
[ 4.533452] rtc_cmos 00:00: RTC can wake from S4
[ 4.533597] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 4.533629] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 4.533635] i2c /dev entries driver
[ 4.533678] device-mapper: uevent: version 1.0.3
[ 4.533735] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 4.533756] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.534394] NET: Registered protocol family 10
[ 4.534647] NET: Registered protocol family 17
[ 4.534656] Key type dns_resolver registered
[ 4.534984] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0xc
[ 4.535034] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0xc
[ 4.538791] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0xc
[ 4.538842] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0xc
[ 4.538903] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0xc
[ 4.538971] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0xc
[ 4.538974] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0xc
[ 4.539036] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0xc
[ 4.539041] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0xc
[ 4.539080] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0xc
[ 4.539119] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0xc
[ 4.539178] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0xc
[ 4.539245] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.539421] registered taskstats version 1
[ 4.539435] Loading compiled-in X.509 certificates
[ 4.540382] Loaded X.509 cert 'Build time autogenerated kernel key: e87c17e018f1352bf3cbc45e4c354f6fb3f9e5e9'
[ 4.540405] zswap: loaded using pool lzo/zbud
[ 4.542429] Key type trusted registered
[ 4.546101] Key type encrypted registered
[ 4.546107] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.546110] ima: No TPM chip found, activating TPM-bypass!
[ 4.546129] evm: HMAC attrs: 0x1
[ 4.546635] Magic number: 8:502:888
[ 4.550202] rtc_cmos 00:00: setting system clock to 2016-03-24 13:53:05 UTC (1458827585)
[ 4.566581] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.566582] EDD information not available.
[ 4.747566] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 4.777304] Freeing unused kernel memory: 1488K (ffffffff81f46000 - ffffffff820ba000)
[ 4.786044] Write protecting the kernel read-only data: 14336k
[ 4.794997] Freeing unused kernel memory: 1876K (ffff88000182b000 - ffff880001a00000)
[ 4.804742] Freeing unused kernel memory: 48K (ffff880001df4000 - ffff880001e00000)
Loading, please wait...
[ 4.824569] systemd-udevd[177]: starting version 215
[ 4.830397] random: systemd-udevd urandom read with 4 bits of entropy available
[ 4.846916] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 4.858024] pps_core: LinuxPPS API ver. 1 registered
[ 4.863570] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.874295] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 4.881202] scsi host0: usb-storage 1-3:1.0
[ 4.881210] PTP clock support registered
[ 4.890395] usbcore: registered new interface driver usb-storage
[ 4.890713] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 4.890715] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 4.890719] ahci 0000:00:1f.2: both AHCI_HFLAG_MULTI_MSI flag set and custom irq handler implemented
[ 4.891277] scsi host1: ahci
[ 4.891352] scsi host2: ahci
[ 4.891440] scsi host3: ahci
[ 4.891520] scsi host4: ahci
[ 4.891601] scsi host5: ahci
[ 4.891686] scsi host6: ahci
[ 4.891752] ata1: SATA max UDMA/133 abar m2048@0xb3320000 port 0xb3320100 irq 49
[ 4.891754] ata2: SATA max UDMA/133 abar m2048@0xb3320000 port 0xb3320180 irq 50
[ 4.891755] ata3: DUMMY
[ 4.891755] ata4: DUMMY
[ 4.891756] ata5: DUMMY
[ 4.891756] ata6: DUMMY
[ 4.941385] dca service started, version 1.12.1
[ 4.977512] mvsas 0000:09:00.0: mvsas: driver version 0.8.16
[ 4.983966] usbcore: registered new interface driver uas
[ 4.984077] mvsas 0000:09:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 4.996340] usb 5-1: New USB device found, idVendor=046b, idProduct=ff10
[ 4.996342] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.996343] usb 5-1: Product: Virtual Keyboard and Mouse
[ 4.996344] usb 5-1: Manufacturer: American Megatrends Inc.
[ 4.996345] usb 5-1: SerialNumber: serial
[ 5.029768] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[ 5.037541] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 5.044254] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.063485] usbcore: registered new interface driver usbhid
[ 5.069703] usbhid: USB HID core driver
[ 5.077437] usbcore: registered new interface driver usbmouse
[ 5.085454] usbcore: registered new interface driver usbkbd
[ 5.093793] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:046B:FF10.0001/input/input2
[ 5.163633] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input0
[ 5.180248] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/0003:046B:FF10.0002/input/input3
[ 5.195982] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input1
[ 5.202728] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.204683] ata1.00: supports DRM functions and may not be fully accessible
[ 5.204815] ata1.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM02B6Q, max UDMA/133
[ 5.204817] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 5.205108] ata1.00: supports DRM functions and may not be fully accessible
[ 5.205230] ata1.00: configured for UDMA/133
[ 5.205484] scsi 1:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 5.206682] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.208649] ata2.00: supports DRM functions and may not be fully accessible
[ 5.208752] ata2.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM02B6Q, max UDMA/133
[ 5.208753] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 5.209016] ata2.00: supports DRM functions and may not be fully accessible
[ 5.209141] ata2.00: configured for UDMA/133
[ 5.238155] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.238157] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:15:17:a2:87:f8
[ 5.238159] igb 0000:01:00.0: eth0: PBA No: Unknown
[ 5.238160] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 5.359742] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 5.359778] sd 1:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 5.359997] sd 1:0:0:0: [sda] Write Protect is off
[ 5.360078] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.362509] sda: sda1
[ 5.362853] sd 1:0:0:0: [sda] Attached SCSI disk
[ 5.397546] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 5.428181] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 5.431735] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 5.431781] sd 2:0:0:0: [sdb] Write Protect is off
[ 5.431793] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.431838] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.433867] sdb: sdb1
[ 5.434134] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 5.473360] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:15:17:a2:87:f9
[ 5.481325] igb 0000:01:00.1: eth1: PBA No: Unknown
[ 5.486766] igb 0000:01:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 5.676547] igb 0000:03:00.0: added PHC on eth2
[ 5.681608] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.689279] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:1b:21:8e:d2:88
[ 5.697242] igb 0000:03:00.0: eth2: PBA No: Unknown
[ 5.702683] igb 0000:03:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 5.889155] scsi 0:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 6
[ 5.892461] igb 0000:03:00.1: added PHC on eth3
[ 5.892462] igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 5.892464] igb 0000:03:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:1b:21:8e:d2:89
[ 5.892465] igb 0000:03:00.1: eth3: PBA No: Unknown
[ 5.892467] igb 0000:03:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 5.933498] sd 0:0:0:0: Attached scsi generic sg2 type 0
[ 5.934424] sd 0:0:0:0: [sdc] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 5.935687] sd 0:0:0:0: [sdc] Write Protect is off
[ 5.936922] sd 0:0:0:0: [sdc] No Caching mode page found
[ 5.936924] sd 0:0:0:0: [sdc] Assuming drive cache: write through
[ 5.943299] sdc: sdc1
[ 5.947815] sd 0:0:0:0: [sdc] Attached SCSI removable disk
[ 6.072466] igb 0000:06:00.0: added PHC on eth4
[ 6.077524] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 6.085197] igb 0000:06:00.0: eth4: (PCIe:2.5Gb/s:Width x4) 00:1b:21:8e:d2:40
[ 6.093160] igb 0000:06:00.0: eth4: PBA No: Unknown
[ 6.098603] igb 0000:06:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 6.292390] igb 0000:06:00.1: added PHC on eth5
[ 6.297448] igb 0000:06:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 6.305113] igb 0000:06:00.1: eth5: (PCIe:2.5Gb/s:Width x4) 00:1b:21:8e:d2:41
[ 6.313077] igb 0000:06:00.1: eth5: PBA No: Unknown
[ 6.318519] igb 0000:06:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 7.763112] scsi host7: mvsas
[ 8.053975] ata15.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.061675] ata15.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.069362] ata16.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.069363] ata16.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.069441] ata10.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.069442] ata13.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.069444] ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.069445] ata13.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.077137] ata20.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.077138] ata20.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.084828] ata8.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.084829] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.092440] ata16.00: configured for UDMA/133
[ 8.092523] ata19.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
[ 8.092525] ata19.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.092526] ata10.00: configured for UDMA/133
[ 8.092528] ata13.00: configured for UDMA/133
[ 8.100222] ata14.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.100223] ata20.00: configured for UDMA/133
[ 8.100225] ata14.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.107912] ata17.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.107914] ata17.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.107915] ata8.00: configured for UDMA/133
[ 8.115597] ata7.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.115598] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.115600] ata19.00: configured for UDMA/133
[ 8.123287] ata12.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.123288] ata12.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.123290] ata14.00: configured for UDMA/133
[ 8.130983] ata9.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.130984] ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.130986] ata17.00: configured for UDMA/133
[ 8.138571] ata11.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.138573] ata7.00: configured for UDMA/133
[ 8.138574] ata11.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.146157] ata18.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.146158] ata18.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.146160] ata12.00: configured for UDMA/133
[ 8.151034] ata21.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 8.151036] ata21.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.151039] ata9.00: configured for UDMA/133
[ 8.158717] ata22.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
[ 8.158719] ata22.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.158721] ata11.00: configured for UDMA/133
[ 8.166388] ata18.00: configured for UDMA/133
[ 8.171244] ata21.00: configured for UDMA/133
[ 8.176114] ata22.00: configured for UDMA/133
[ 8.373347] ata15.00: configured for UDMA/133
[ 8.381876] scsi 7:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.412357] scsi 7:0:1:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.448355] scsi 7:0:2:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.480299] scsi 7:0:3:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.512243] scsi 7:0:4:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.544284] scsi 7:0:5:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.576190] scsi 7:0:6:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.608335] scsi 7:0:7:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.640190] scsi 7:0:8:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.672214] scsi 7:0:9:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.704212] scsi 7:0:10:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.736284] scsi 7:0:11:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.772282] scsi 7:0:12:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 5
[ 8.804231] scsi 7:0:13:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.836262] scsi 7:0:14:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.876301] scsi 7:0:15:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 5
[ 8.910711] scsi 7:0:16:0: Enclosure Areca x28-05.63.1.32 000 PQ: 0 ANSI: 3
[ 8.939016] sd 7:0:0:0: Attached scsi generic sg3 type 0
[ 8.939023] sd 7:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.939064] sd 7:0:0:0: [sdd] Write Protect is off
[ 8.939077] sd 7:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.939442] sdd: sdd1
[ 8.939704] sd 7:0:0:0: [sdd] Attached SCSI disk
[ 8.977268] sd 7:0:1:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.977280] sd 7:0:1:0: Attached scsi generic sg4 type 0
[ 8.977638] sd 7:0:2:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.977678] sd 7:0:2:0: [sdf] Write Protect is off
[ 8.977691] sd 7:0:2:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.977739] sd 7:0:2:0: Attached scsi generic sg5 type 0
[ 8.978035] sdf: sdf1
[ 8.978087] sd 7:0:3:0: Attached scsi generic sg6 type 0
[ 8.978125] sd 7:0:3:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.978200] sd 7:0:2:0: [sdf] Attached SCSI disk
[ 8.978221] sd 7:0:3:0: [sdg] Write Protect is off
[ 8.978292] sd 7:0:4:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.978313] sd 7:0:3:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.978316] sd 7:0:4:0: [sdh] Write Protect is off
[ 8.978328] sd 7:0:4:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.978331] sd 7:0:4:0: Attached scsi generic sg7 type 0
[ 8.978511] sd 7:0:5:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.978550] sd 7:0:5:0: Attached scsi generic sg8 type 0
[ 8.978564] sd 7:0:5:0: [sdi] Write Protect is off
[ 8.978586] sd 7:0:5:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.978614] sdh: sdh1
[ 8.978754] sd 7:0:6:0: [sdj] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.978758] sdg: sdg1
[ 8.978792] sd 7:0:6:0: Attached scsi generic sg9 type 0
[ 8.978799] sd 7:0:4:0: [sdh] Attached SCSI disk
[ 8.978814] sd 7:0:6:0: [sdj] Write Protect is off
[ 8.978893] sd 7:0:6:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.978971] sdi: sdi1
[ 8.978981] sd 7:0:7:0: [sdk] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.979007] sd 7:0:7:0: [sdk] Write Protect is off
[ 8.979020] sd 7:0:7:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.979034] sd 7:0:3:0: [sdg] Attached SCSI disk
[ 8.979060] sd 7:0:7:0: Attached scsi generic sg10 type 0
[ 8.979203] sdj: sdj1
[ 8.979205] sd 7:0:5:0: [sdi] Attached SCSI disk
[ 8.979288] sd 7:0:8:0: [sdl] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.979314] sdk: sdk1
[ 8.979348] sd 7:0:8:0: [sdl] Write Protect is off
[ 8.979351] sd 7:0:8:0: Attached scsi generic sg11 type 0
[ 8.979374] sd 7:0:8:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.979413] sd 7:0:6:0: [sdj] Attached SCSI disk
[ 8.979474] sd 7:0:7:0: [sdk] Attached SCSI disk
[ 8.979566] sd 7:0:9:0: [sdm] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.979591] sd 7:0:9:0: [sdm] Write Protect is off
[ 8.979603] sd 7:0:9:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.979627] sd 7:0:9:0: Attached scsi generic sg12 type 0
[ 8.979825] sd 7:0:10:0: [sdn] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.979872] sd 7:0:10:0: Attached scsi generic sg13 type 0
[ 8.979882] sd 7:0:10:0: [sdn] Write Protect is off
[ 8.979904] sd 7:0:10:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.980098] sd 7:0:11:0: [sdo] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.980133] sd 7:0:11:0: Attached scsi generic sg14 type 0
[ 8.980139] sd 7:0:11:0: [sdo] Write Protect is off
[ 8.980161] sd 7:0:11:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.980357] sd 7:0:12:0: [sdp] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.980395] sd 7:0:12:0: Attached scsi generic sg15 type 0
[ 8.980429] sd 7:0:12:0: [sdp] Write Protect is off
[ 8.980451] sd 7:0:12:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.980560] sd 7:0:13:0: [sdq] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.980591] sd 7:0:13:0: Attached scsi generic sg16 type 0
[ 8.980631] sd 7:0:13:0: [sdq] Write Protect is off
[ 8.980655] sd 7:0:13:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.980731] sd 7:0:14:0: [sdr] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.980771] sd 7:0:14:0: Attached scsi generic sg17 type 0
[ 8.980785] sd 7:0:14:0: [sdr] Write Protect is off
[ 8.980812] sd 7:0:14:0: [sdr] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.980945] sd 7:0:15:0: [sds] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 8.980993] sd 7:0:15:0: Attached scsi generic sg18 type 0
[ 8.981004] sd 7:0:15:0: [sds] Write Protect is off
[ 8.981034] sd 7:0:15:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.981160] scsi 7:0:16:0: Attached scsi generic sg19 type 13
[ 8.989472] sdl: sdl1
[ 8.989804] sd 7:0:8:0: [sdl] Attached SCSI disk
[ 8.991198] sdq: sdq1
[ 8.991411] sd 7:0:13:0: [sdq] Attached SCSI disk
[ 8.994142] random: nonblocking pool is initialized
[ 8.994152] sdo: sdo1
[ 8.994362] sdr: sdr1
[ 8.994540] sd 7:0:11:0: [sdo] Attached SCSI disk
[ 8.994597] sd 7:0:14:0: [sdr] Attached SCSI disk
[ 8.995340] sdp: sdp1
[ 8.995477] sds: sds1
[ 8.995595] sd 7:0:12:0: [sdp] Attached SCSI disk
[ 8.995673] sd 7:0:15:0: [sds] Attached SCSI disk
[ 8.995943] sdm: sdm1
[ 8.996120] sd 7:0:9:0: [sdm] Attached SCSI disk
[ 8.999587] sdn: sdn1
[ 8.999874] sd 7:0:10:0: [sdn] Attached SCSI disk
[ 9.538130] sd 7:0:1:0: [sde] Write Protect is off
[ 9.543504] sd 7:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 9.554165] sde: sde1
[ 9.557151] sd 7:0:1:0: [sde] Attached SCSI disk
[ 13.125616] ses 7:0:16:0: Attached Enclosure device
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... [ 28.268691] md: md0 stopped.
[ 28.272537] md: bind<sdl1>
[ 28.275761] md: bind<sdd1>
[ 28.278798] md: kicking non-fresh sdl1 from array!
[ 28.284159] md: unbind<sdl1>
[ 28.299698] md: export_rdev(sdl1)
[ 28.308220] md: raid1 personality registered for level 1
[ 28.315431] md/raid1:md0: active with 1 out of 2 mirrors
[ 28.321376] md0: detected capacity change from 0 to 1000194564096
mdadm: /dev/md0 has been started with 1 drive (out of 2).
[ 28.346652] md: md1 stopped.
[ 28.350580] md: bind<sdm1>
[ 28.353931] md: bind<sde1>
[ 28.358163] md/raid1:md1: not clean -- starting background reconstruction
[ 28.365745] md/raid1:md1: active with 2 out of 2 mirrors
[ 28.371697] md1: detected capacity change from 0 to 1000194564096
[ 28.378783] md: resync of RAID array md1
[ 28.383165] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 28.389673] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 28.400159] md: using 128k window, over a total of 976752504k.
[ 28.406666] md: resuming resync of md1 from checkpoint.
mdadm: /dev/md1 has been started with 2 drives.
[ 28.482793] md: md2 stopped.
[ 28.504078] md: bind<sdn1>
[ 28.507446] md: bind<sdf1>
[ 28.511472] md/raid1:md2: not clean -- starting background reconstruction
[ 28.519053] md/raid1:md2: active with 2 out of 2 mirrors
[ 28.525001] md2: detected capacity change from 0 to 1000194564096
[ 28.531913] md: resync of RAID array md2
[ 28.536294] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 28.542831] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
mdadm: /dev/md2 [ 28.553322] md: using 128k window, over a total of 976752504k.
[ 28.561372] md: resuming resync of md2 from checkpoint.
has been started with 2 drives.
[ 28.614464] md: md3 stopped.
[ 28.618915] md: bind<sdo1>
[ 28.633867] md: bind<sdg1>
[ 28.638181] md/raid1:md3: not clean -- starting background reconstruction
[ 28.645763] md/raid1:md3: active with 2 out of 2 mirrors
[ 28.651712] md3: detected capacity change from 0 to 1000194564096
[ 28.658778] md: resync of RAID array md3
[ 28.663160] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 28.669697] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
mdadm: /dev/md3 [ 28.680207] md: using 128k window, over a total of 976752504k.
[ 28.688267] md: resuming resync of md3 from checkpoint.
has been started with 2 drives.
[ 28.743955] md: md4 stopped.
[ 28.748457] md: bind<sdp1>
[ 28.752660] md: bind<sdh1>
[ 28.756866] md/raid1:md4: not clean -- starting background reconstruction
[ 28.764448] md/raid1:md4: active with 2 out of 2 mirrors
[ 28.770677] md4: detected capacity change from 0 to 1000194564096
[ 28.777693] md: resync of RAID array md4
[ 28.782096] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 28.788654] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
mdadm: /dev/md4 [ 28.799188] md: using 128k window, over a total of 976752504k.
has been started[ 28.807290] md: resuming resync of md4 from checkpoint.
with 2 drives.
[ 29.037006] md: md5 stopped.
[ 29.052551] md: bind<sdq1>
[ 29.068797] md: bind<sdi1>
[ 29.073186] md/raid1:md5: not clean -- starting background reconstruction
[ 29.080766] md/raid1:md5: active with 2 out of 2 mirrors
[ 29.086998] md5: detected capacity change from 0 to 1000194564096
[ 29.094206] md: resync of RAID array md5
[ 29.098589] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 29.105098] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
mdadm: /dev/md5 [ 29.115584] md: using 128k window, over a total of 976752504k.
[ 29.123627] md: resuming resync of md5 from checkpoint.
has been started with 2 drives.
[ 29.415923] md: md6 stopped.
[ 29.421265] md: bind<sdr1>
[ 29.425032] md: bind<sdj1>
[ 29.429022] md/raid1:md6: not clean -- starting background reconstruction
[ 29.436603] md/raid1:md6: active with 2 out of 2 mirrors
[ 29.442544] md6: detected capacity change from 0 to 1000194564096
[ 29.449510] md: resync of RAID array md6
[ 29.453882] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 29.460392] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
mdadm: /dev/md6 [ 29.470879] md: using 128k window, over a total of 976752504k.
[ 29.478932] md: resuming resync of md6 from checkpoint.
has been started with 2 drives.
[ 30.105036] md: md7 stopped.
[ 30.138838] md: bind<sds1>
[ 30.157424] md: bind<sdk1>
[ 30.161330] md/raid1:md7: active with 2 out of 2 mirrors
[ 30.167279] md7: detected capacity change from 0 to 1000194564096
mdadm: /dev/md7 has been started with 2 drives.
Success: assembled all arrays.
done.
done.
Begin: Running /scripts/local-premount ... [ 33.327683] raid6: sse2x1 gen() 6289 MB/s
[ 33.399689] raid6: sse2x1 xor() 4941 MB/s
[ 33.471681] raid6: sse2x2 gen() 7472 MB/s
[ 33.543700] raid6: sse2x2 xor() 5776 MB/s
[ 33.615693] raid6: sse2x4 gen() 8492 MB/s
[ 33.687679] raid6: sse2x4 xor() 6437 MB/s
[ 33.692508] raid6: using algorithm sse2x4 gen() 8492 MB/s
[ 33.698728] raid6: .... xor() 6437 MB/s, rmw enabled
[ 33.704306] raid6: using ssse3x2 recovery algorithm
[ 33.712635] xor: measuring software checksum speed
[ 33.755649] prefetch64-sse: 10954.000 MB/sec
[ 33.799664] generic_sse: 9739.000 MB/sec
[ 33.804430] xor: using function: prefetch64-sse (10954.000 MB/sec)
[ 33.831523] Btrfs loaded
Scanning for Btrfs filesystems
done.
Begin: Checking root file system ... fsck from util-linux 2.25.2
/dev/mapper/lvm0--vol-root: clean, 82682/983040 files, 1825159/3932160 blocks
done.
[ 39.036981] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 52.797246] systemd-udevd[604]: starting version 215
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[....] Waiting for /dev to be fully populated...[ 57.738337] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 57.851791] EDAC MC: Ver: 3.0.0
[ 57.893367] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 57.904774] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 57.917067] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 57.941361] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 57.948049] ipmi message handler version 39.2
[ 57.953239] igb 0000:01:00.0: DCA enabled
[ 57.957741] igb 0000:01:00.1: DCA enabled
[ 57.962594] igb 0000:03:00.0: DCA enabled
[ 57.967096] igb 0000:03:00.1: DCA enabled
[ 57.971988] igb 0000:06:00.0: DCA enabled
[ 57.976498] igb 0000:06:00.1: DCA enabled
[ 58.002141] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000428-0x000000000000042F (\GPE0) (20160108/utaddress-255)
[ 58.019461] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 58.030830] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000052F (\_SI.SIOR) (20160108/utaddress-255)
[ 58.048545] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 58.059980] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 58.067435] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 58.074101] ipmi_si IPI0001:00: ipmi_si: probing via ACPI
[ 58.080158] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 58.087447] ipmi_si: Adding ACPI-specified kcs state machine
[ 58.093791] IPMI System Interface driver.
[ 58.098284] ipmi_si: probing via SMBIOS
[ 58.102558] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 58.109159] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[ 58.117619] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 58.238399] SSE version of gcm_enc/dec engaged.
[ 58.325908] ipmi_si IPI0001:00: Found new BMC (man_id: 0x000157, prod_id: 0x003e, dev_id: 0x21)
[ 58.335631] ipmi_si IPI0001:00: IPMI kcs interface initialized
[ 58.383658] IPMI SSIF Interface driver
[ 58.447306] gpio_ich: GPIO from 451 to 511 on gpio_ich
[ 58.601903] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
done.
[FAIL] RAID status not OK. Exiting. ... failed!
[ ok ] Generating udev events for MD arrays...done.
[ ok ] Activating swap...done.
[ 70.076505] EXT4-fs (dm-0): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.25.2
e2fsck 1.42.12 (29-Aug-2014)
/dev/mapper/lvm0--vol-root: clean, 82682/983040 files, 1825159/3932160 blocks
done.
[ 70.789166] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Starting early crypto disks...done.
[ 76.530134] 8021q: 802.1Q VLAN Support v1.8
[ 76.585223] ipmi device interface
[info] Loading kernel module 8021q.
[info] Loading kernel module ipmi_si.
[info] Loading kernel module ipmi_devintf.
[info] Loading kernel module fuse.
[....] Setting up LVM Volume Groups...[ 81.729463] async_tx: api initialized (async)
[ 82.031411] md: raid6 personality registered for level 6
[ 82.037346] md: raid5 personality registered for level 5
[ 82.043276] md: raid4 personality registered for level 4
[ 82.088352] device-mapper: raid: Loading target version 1.7.0
[ 82.105235] md/raid1:mdX: active with 2 out of 2 mirrors
[ 82.111310] mdX: invalid bitmap file superblock: bad magic
[ 82.117447] mdX: failed to create bitmap (-22)
[ 82.122561] device-mapper: table: 252:7: raid: Fail to run raid array
[ 82.129756] device-mapper: ioctl: error adding target to table
device-mapper: reload ioctl on failed: Invalid argument
failed.
[ ok ] Starting remaining crypto disks...done.
[....] Activating lvm and md swap...[ 82.317056] Adding 524284k swap on /dev/mapper/lvm0--vol-swap. Priority:-1 extents:1 across:524284k FS
done.
[....] Checking file systems...fsck from util-linux 2.25.2
e2fsck 1.42.12 (29-Aug-2014)
/dev/mapper/lvm0--vol-home: clean, 27/1310720 files, 126303/5242880 blocks
e2fsck 1.42.12 (29-Aug-2014)
fsck.ext4: No such file or directory while trying to open /dev/lvm0-vol/storage
Possibly non-existent device?
fsck exited with status code 8
failed (code 8).
[FAIL] File system check failed. A log is being saved in /var/log/fsck/checkfs if that location is writable. Please repair the file system manually. ... failed!
[warn] A maintenance shell will now be started. CONTROL-D will terminate this shell and resume system boot. ... (warning).
Give root password for maintenance
(or type Control-D to continue):
unroot@yadira:~# uname -a
Linux yadira 4.5.0-040500-generic #201603140130 SMP Mon Mar 14 05:32:22 UTC 2016 x86_64 GNU/Linux
root@yadira:~# lvconvert --version
LVM version: 2.02.111(2) (2014-09-01)
Library version: 1.02.90 (2014-09-01)
Driver version: 4.34.0
GNU GRUB version 2.02~beta2-22+deb8u1
+----------------------------------------------------------------------------+
| Debian GNU/Linux, with Linux 4.5.0-040500-generic (recovery mode) |^
| Debian GNU/Linux, with Linux 4.3.0-0.bpo.1-amd64 |
| Debian GNU/Linux, with Linux 4.3.0-0.bpo.1-amd64 (sysvinit) |
| Debian GNU/Linux, with Linux 4.3.0-0.bpo.1-amd64 (systemd) |
| Debian GNU/Linux, with Linux 4.3.0-0.bpo.1-amd64 (recovery mode) |
| Debian GNU/Linux, with Linux 3.16.0-4-amd64 |
| Debian GNU/Linux, with Linux 3.16.0-4-amd64 (sysvinit) |
| Debian GNU/Linux, with Linux 3.16.0-4-amd64 (systemd) |
| Debian GNU/Linux, with Linux 3.16.0-4-amd64 (recovery mode) |
| Debian GNU/Linux, with Linux 3.16.0-0.bpo.4-amd64 |
|*Debian GNU/Linux, with Linux 3.16.0-0.bpo.4-amd64 (sysvinit) |
| Debian GNU/Linux, with Linux 3.16.0-0.bpo.4-amd64 (systemd) |v
+----------------------------------------------------------------------------+
Use the ^ and v keys to select which entry is highlighted.
Press enter to boot the selected OS, `e' to edit the commands
before booting or `c' for a command-line.
Loading Linux 3.16.0-0.bpo.4-amd64 ...
Loading initial ramdisk ...
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-0.bpo.4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u6~bpo70+1 (2015-11-11)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-0.bpo.4-amd64 root=/dev/mapper/lvm0--vol-root ro rootdelay=15 console=ttyS0,115200 init=/lib/sysvinit/init
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000923ff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000092400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008c53efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000008c53f000-0x000000008c611fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008c612000-0x000000008c710fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008c711000-0x000000008db10fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008db11000-0x000000008f601fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f602000-0x000000008f64efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000008f64f000-0x000000008f6e5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f6e6000-0x000000008f6effff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f6f0000-0x000000008f6f1fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f6f2000-0x000000008f7cefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000008f7cf000-0x000000008f7fffff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000008f800000-0x000000008fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000a0000000-0x00000000afffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000fcffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000016fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x170000 max_arch_pfn = 0x400000000
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0x8c53f max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fdaa0-0x000fdaaf] mapped at [ffff8800000fdaa0]
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] init_memory_mapping: [mem 0x16fe00000-0x16fffffff]
[ 0.000000] init_memory_mapping: [mem 0x16c000000-0x16fdfffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x16bffffff]
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x8c53efff]
[ 0.000000] RAMDISK: [mem 0x35e50000-0x36f1ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0410 000024 (v02 INTEL )
[ 0.000000] ACPI: XSDT 0x000000008F7FD120 000094 (v01 INTEL S5520HC 00000000 01000013)
[ 0.000000] ACPI: FACP 0x000000008F7FB000 0000F4 (v04 INTEL S5520HC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: DSDT 0x000000008F7F4000 00657C (v02 INTEL S5520HC 00000003 MSFT 0100000D)
[ 0.000000] ACPI: FACS 0x000000008F6F2000 000040
[ 0.000000] ACPI: APIC 0x000000008F7F3000 0001A8 (v02 INTEL S5520HC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: MCFG 0x000000008F7F2000 00003C (v01 INTEL S5520HC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: HPET 0x000000008F7F1000 000038 (v01 INTEL S5520HC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: SLIT 0x000000008F7F0000 000030 (v01 INTEL S5520HC 00000001 MSFT 0100000D)
[ 0.000000] ACPI: SPCR 0x000000008F7EF000 000050 (v01 INTEL S5520HC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: WDDT 0x000000008F7EE000 000040 (v01 INTEL S5520HC 00000000 MSFT 0100000D)
[ 0.000000] ACPI: SSDT 0x000000008F7D3000 01AFC4 (v02 INTEL SSDT PM 00004000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000008F7D2000 0001D8 (v02 INTEL IPMI 00004000 INTL 20061109)
[ 0.000000] ACPI: HEST 0x000000008F7D1000 0000A8 (v01 INTEL S5520HC 00000001 INTL 00000001)
[ 0.000000] ACPI: BERT 0x000000008F7D0000 000030 (v01 INTEL S5520HC 00000001 INTL 00000001)
[ 0.000000] ACPI: ERST 0x000000008F7CF000 000230 (v01 INTEL S5520HC 00000001 INTL 00000001)
[ 0.000000] ACPI: EINJ 0x000000008F6F1000 000130 (v01 INTEL S5520HC 00000001 INTL 00000001)
[ 0.000000] ACPI: DMAR 0x000000008F6F0000 0001D0 (v01 INTEL S5520HC 00000001 MSFT 0100000D)
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000016fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x16fffffff]
[ 0.000000] NODE_DATA [mem 0x16fff9000-0x16fffdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x16fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00091fff]
[ 0.000000] node 0: [mem 0x00100000-0x8c53efff]
[ 0.000000] node 0: [mem 0x100000000-0x16fffffff]
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x10] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x12] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x14] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x11] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x13] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x15] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0xff] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0d] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0e] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x0f] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x10] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x11] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x12] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x13] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x14] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x15] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x16] high level lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x17] high level lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: IOAPIC (id[0x09] address[0xfec90000] gsi_base[24])
[ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec90000, GSI 24-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a401 base: 0xfed00000
[ 0.000000] smpboot: Allowing 24 CPUs, 12 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00092000-0x00092fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00093000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c53f000-0x8c611fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c612000-0x8c710fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8c711000-0x8db10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8db11000-0x8f601fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f602000-0x8f64efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f64f000-0x8f6e5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f6e6000-0x8f6effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f6f0000-0x8f6f1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f6f2000-0x8f7cefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f7cf000-0x8f7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x8f800000-0x8fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0x9fffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xa0000000-0xafffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfcffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfd000000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xff7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.000000] e820: [mem 0xb0000000-0xfbffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:24 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88016f200000 s80832 r8192 d21568 u131072
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1019272
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-0.bpo.4-amd64 root=/dev/mapper/lvm0--vol-root ro rootdelay=15 console=ttyS0,115200 init=/lib/sysvinit/init
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Memory: 3976844K/4133696K available (5443K kernel code, 936K rwdata, 1832K rodata, 1208K init, 840K bss, 156852K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=24.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
[ 0.000000] NR_IRQS:33024 nr_irqs:1280 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2666.479 MHz processor
[ 0.000031] Calibrating delay loop (skipped), value calculated using timer frequency.. 5332.95 BogoMIPS (lpj=10665916)
[ 0.011974] pid_max: default: 32768 minimum: 301
[ 0.017137] ACPI: Core revision 20140424
[ 0.034442] ACPI: All ACPI Tables successfully acquired
[ 0.042898] Security Framework initialized
[ 0.047481] AppArmor: AppArmor disabled by boot time parameter
[ 0.053994] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.061638] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.070766] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.079120] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.086608] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.094801] Initializing cgroup subsys memory
[ 0.099672] Initializing cgroup subsys devices
[ 0.104639] Initializing cgroup subsys freezer
[ 0.109602] Initializing cgroup subsys net_cls
[ 0.114567] Initializing cgroup subsys blkio
[ 0.119336] Initializing cgroup subsys perf_event
[ 0.124589] Initializing cgroup subsys net_prio
[ 0.129668] CPU: Physical Processor ID: 0
[ 0.134145] CPU: Processor Core ID: 0
[ 0.138241] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.138241] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.152802] mce: CPU supports 9 MCE banks
[ 0.157285] CPU0: Thermal monitoring enabled (TM1)
[ 0.162638] process: using mwait in idle threads
[ 0.167796] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.167796] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.167796] tlb_flushall_shift: 6
[ 0.184666] Freeing SMP alternatives memory: 20K (ffffffff81a1a000 - ffffffff81a1f000)
[ 0.194476] ftrace: allocating 21615 entries in 85 pages
[ 0.209627] dmar: Host address width 40
[ 0.213911] dmar: DRHD base: 0x000000fe710000 flags: 0x1
[ 0.219848] dmar: IOMMU 0: reg_base_addr fe710000 ver 1:0 cap c90780106f0462 ecap f020fe
[ 0.228882] dmar: RMRR base: 0x0000008f62f000 end: 0x0000008f631fff
[ 0.235881] dmar: RMRR base: 0x0000008f61a000 end: 0x0000008f61afff
[ 0.242877] dmar: RMRR base: 0x0000008f617000 end: 0x0000008f617fff
[ 0.249865] dmar: RMRR base: 0x0000008f614000 end: 0x0000008f614fff
[ 0.256853] dmar: RMRR base: 0x0000008f611000 end: 0x0000008f611fff
[ 0.263842] dmar: RMRR base: 0x0000008f60e000 end: 0x0000008f60efff
[ 0.270838] dmar: RMRR base: 0x0000008f60b000 end: 0x0000008f60bfff
[ 0.277837] dmar: RMRR base: 0x0000008f608000 end: 0x0000008f608fff
[ 0.284834] dmar: RMRR base: 0x0000008f605000 end: 0x0000008f605fff
[ 0.291832] dmar: ATSR flags: 0x0
[ 0.295622] IOAPIC id 8 under DRHD base 0xfe710000 IOMMU 0
[ 0.301836] IOAPIC id 9 under DRHD base 0xfe710000 IOMMU 0
[ 0.308193] Enabled IRQ remapping in xapic mode
[ 0.313253] Switched APIC routing to physical flat.
[ 0.319247] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.365628] smpboot: CPU0: Intel(R) Xeon(R) CPU X5650 @ 2.67GHz (fam: 06, model: 2c, stepping: 02)
[ 0.484317] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.493689] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.501361] ... version: 3
[ 0.505832] ... bit width: 48
[ 0.510400] ... generic registers: 4
[ 0.514870] ... value mask: 0000ffffffffffff
[ 0.520795] ... max period: 000000007fffffff
[ 0.526719] ... fixed-purpose events: 3
[ 0.531190] ... event mask: 000000070000000f
[ 0.538614] x86: Booting SMP configuration:
[ 0.543282] .... node #0, CPUs: #1
[ 0.561017] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.570253] #2 #3 #4 #5 #6 #7 #8 #9 #10 #11
[ 0.708027] x86: Booted up 1 node, 12 CPUs
[ 0.712803] smpboot: Total of 12 processors activated (63995.49 BogoMIPS)
[ 0.733879] devtmpfs: initialized
[ 0.739972] PM: Registering ACPI NVS region [mem 0x8c53f000-0x8c611fff] (864256 bytes)
[ 0.748828] PM: Registering ACPI NVS region [mem 0x8c711000-0x8db10fff] (20971520 bytes)
[ 0.758265] PM: Registering ACPI NVS region [mem 0x8f6e6000-0x8f6effff] (40960 bytes)
[ 0.767005] PM: Registering ACPI NVS region [mem 0x8f6f2000-0x8f7cefff] (905216 bytes)
[ 0.776855] pinctrl core: initialized pinctrl subsystem
[ 0.782769] NET: Registered protocol family 16
[ 0.787838] cpuidle: using governor ladder
[ 0.792408] cpuidle: using governor menu
[ 0.796824] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.805271] ACPI: bus type PCI registered
[ 0.809742] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.817027] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xa0000000-0xafffffff] (base 0xa0000000)
[ 0.827414] PCI: MMCONFIG at [mem 0xa0000000-0xafffffff] reserved in E820
[ 0.835465] PCI: Using configuration type 1 for base access
[ 0.852763] ACPI: Added _OSI(Module Device)
[ 0.857431] ACPI: Added _OSI(Processor Device)
[ 0.862386] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.867633] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.893376] ACPI Error: Field [CPB3] at 96 exceeds Buffer [NULL] size 64 (bits) (20140424/dsopcode-236)
[ 0.903872] ACPI Error: Method parse/execution failed [\_SB_._OSC] (Node ffff88016b048298), AE_AML_BUFFER_LIMIT (20140424/psparse-536)
[ 0.918853] ACPI: Interpreter enabled
[ 0.922944] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.933258] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
[ 0.943569] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20140424/hwxface-580)
[ 0.953882] ACPI: (supports S0 S1 S5)
[ 0.957967] ACPI: Using IOAPIC for interrupt routing
[ 0.963552] HEST: Table parsing has been initialized.
[ 0.969181] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.985611] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fd])
[ 0.992513] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 1.001776] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 1.011068] acpi PNP0A08:00: ignoring host bridge window [mem 0x000c4000-0x000cbfff] (conflicts with Video ROM [mem 0x000c0000-0x000c7fff])
[ 1.025272] PCI host bridge to bus 0000:00
[ 1.029842] pci_bus 0000:00: root bus resource [bus 00-fd]
[ 1.035963] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.042860] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.049757] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.057428] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfedfffff]
[ 1.065099] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xfdffffff]
[ 1.073030] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 1.079494] pci 0000:00:03.0: System wakeup disabled by ACPI
[ 1.085954] pci 0000:00:05.0: System wakeup disabled by ACPI
[ 1.092417] pci 0000:00:07.0: System wakeup disabled by ACPI
[ 1.098876] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 1.107512] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 1.113999] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 1.120485] pci 0000:00:1a.2: System wakeup disabled by ACPI
[ 1.127019] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 1.133499] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 1.139982] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 1.146463] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 1.152952] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 1.159440] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 1.165974] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 1.172409] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 1.178834] pci 0000:00:1f.0: can't claim BAR 13 [io 0x0400-0x047f]: address conflict with ACPI CPU throttle [io 0x0410-0x0415]
[ 1.191841] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO
[ 1.199805] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 000f)
[ 1.208253] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0 (mask 000f)
[ 1.216701] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0600 (mask 001f)
[ 1.225745] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 1.232231] pci 0000:01:00.1: System wakeup disabled by ACPI
[ 1.239251] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.244892] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 1.252518] pci 0000:00:05.0: PCI bridge to [bus 03-05]
[ 1.260439] pci 0000:00:07.0: PCI bridge to [bus 06-08]
[ 1.267073] pci 0000:00:09.0: PCI bridge to [bus 09]
[ 1.272722] pci 0000:00:1c.0: PCI bridge to [bus 0a]
[ 1.284288] pci 0000:00:1c.4: PCI bridge to [bus 0b]
[ 1.289960] pci 0000:00:1e.0: PCI bridge to [bus 0c] (subtractive decode)
[ 1.297588] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 1.305797] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 1.314029] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 1.322255] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 1.330483] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 1.338700] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.348198] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.357699] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.367194] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 1.377008] ACPI: Enabled 1 GPEs in block 00 to 3F
[ 1.382613] vgaarb: setting as boot device: PCI:0000:0b:00.0
[ 1.388927] vgaarb: device added: PCI:0000:0b:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.397956] vgaarb: loaded
[ 1.400973] vgaarb: bridge control possible 0000:0b:00.0
[ 1.406948] PCI: Using ACPI for IRQ routing
[ 1.417001] PCI: Discovered peer bus ff
[ 1.421306] PCI host bridge to bus 0000:ff
[ 1.425877] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff]
[ 1.432774] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xffffffffff]
[ 1.440638] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff]
[ 1.450680] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 1.456462] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 1.464999] Switched to clocksource hpet
[ 1.473912] pnp: PnP ACPI init
[ 1.477331] ACPI: bus type PNP registered
[ 1.482120] system 00:01: [io 0x0500-0x057f] could not be reserved
[ 1.489117] system 00:01: [io 0x0400-0x047f] could not be reserved
[ 1.496104] system 00:01: [io 0x0800-0x081f] has been reserved
[ 1.502712] system 00:01: [io 0x0ca2-0x0ca3] has been reserved
[ 1.509320] system 00:01: [io 0x0600-0x061f] has been reserved
[ 1.515928] system 00:01: [io 0x0880-0x0883] has been reserved
[ 1.522536] system 00:01: [io 0x0ca4-0x0ca5] has been reserved
[ 1.529145] system 00:01: [mem 0xfed1c000-0xfed3fffe] could not be reserved
[ 1.536917] system 00:01: [mem 0xff000000-0xffffffff] could not be reserved
[ 1.544678] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
[ 1.552062] system 00:01: [mem 0xfe900000-0xfe90001f] has been reserved
[ 1.559445] system 00:01: [mem 0xfea00000-0xfea0001f] has been reserved
[ 1.566828] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
[ 1.574632] pnp: PnP ACPI: found 5 devices
[ 1.579206] ACPI: bus type PNP unregistered
[ 1.590147] pci 0000:03:00.0: can't claim BAR 6 [mem 0xffc00000-0xffffffff pref]: no compatible bridge window
[ 1.601217] pci 0000:03:00.1: can't claim BAR 6 [mem 0xffc00000-0xffffffff pref]: no compatible bridge window
[ 1.612275] pci 0000:06:00.0: can't claim BAR 6 [mem 0xffc00000-0xffffffff pref]: no compatible bridge window
[ 1.623342] pci 0000:06:00.1: can't claim BAR 6 [mem 0xffc00000-0xffffffff pref]: no compatible bridge window
[ 1.634410] pci 0000:09:00.0: can't claim BAR 6 [mem 0xfffc0000-0xffffffff pref]: no compatible bridge window
[ 1.645478] pci 0000:0b:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 1.656604] pci 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
[ 1.664579] pci 0000:00:1c.0: BAR 14: assigned [mem 0xb1900000-0xb1afffff]
[ 1.672246] pci 0000:00:1c.0: BAR 15: assigned [mem 0xb2500000-0xb26fffff 64bit pref]
[ 1.680989] pci 0000:00:1c.0: BAR 13: assigned [io 0x6000-0x6fff]
[ 1.687879] pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
[ 1.694770] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 1.700311] pci 0000:00:01.0: bridge window [io 0x4000-0x4fff]
[ 1.707116] pci 0000:00:01.0: bridge window [mem 0xb3200000-0xb32fffff]
[ 1.714697] pci 0000:00:03.0: PCI bridge to [bus 02]
[ 1.720245] pci 0000:03:00.0: BAR 6: can't assign mem pref (size 0x400000)
[ 1.727919] pci 0000:03:00.1: BAR 6: can't assign mem pref (size 0x400000)
[ 1.735592] pci 0000:00:05.0: PCI bridge to [bus 03-05]
[ 1.741425] pci 0000:00:05.0: bridge window [io 0x3000-0x3fff]
[ 1.748219] pci 0000:00:05.0: bridge window [mem 0xb2800000-0xb30fffff]
[ 1.755801] pci 0000:06:00.0: BAR 6: can't assign mem pref (size 0x400000)
[ 1.763474] pci 0000:06:00.1: BAR 6: can't assign mem pref (size 0x400000)
[ 1.771147] pci 0000:00:07.0: PCI bridge to [bus 06-08]
[ 1.776981] pci 0000:00:07.0: bridge window [io 0x2000-0x2fff]
[ 1.783774] pci 0000:00:07.0: bridge window [mem 0xb1c00000-0xb24fffff]
[ 1.791356] pci 0000:09:00.0: BAR 6: assigned [mem 0xb3140000-0xb317ffff pref]
[ 1.799419] pci 0000:00:09.0: PCI bridge to [bus 09]
[ 1.804958] pci 0000:00:09.0: bridge window [io 0x1000-0x1fff]
[ 1.811762] pci 0000:00:09.0: bridge window [mem 0xb3100000-0xb31fffff]
[ 1.819343] pci 0000:00:1c.0: PCI bridge to [bus 0a]
[ 1.824886] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 1.831690] pci 0000:00:1c.0: bridge window [mem 0xb1900000-0xb1afffff]
[ 1.839269] pci 0000:00:1c.0: bridge window [mem 0xb2500000-0xb26fffff 64bit pref]
[ 1.847916] pci 0000:0b:00.0: BAR 6: assigned [mem 0xb1810000-0xb181ffff pref]
[ 1.855977] pci 0000:00:1c.4: PCI bridge to [bus 0b]
[ 1.861518] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
[ 1.868322] pci 0000:00:1c.4: bridge window [mem 0xb1000000-0xb18fffff]
[ 1.875900] pci 0000:00:1c.4: bridge window [mem 0xb0000000-0xb0ffffff 64bit pref]
[ 1.884539] pci 0000:00:1e.0: PCI bridge to [bus 0c]
[ 1.890231] NET: Registered protocol family 2
[ 1.895411] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 1.903554] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 1.911025] TCP: Hash tables configured (established 32768 bind 32768)
[ 1.918330] TCP: reno registered
[ 1.921929] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.928647] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.935949] NET: Registered protocol family 1
[ 1.994906] pci 0000:01:00.0: Disabling L0s
[ 1.999577] pci 0000:01:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 2.007642] pci 0000:01:00.1: Disabling L0s
[ 2.012309] pci 0000:01:00.1: can't disable ASPM; OS doesn't have ASPM control
[ 2.020451] Unpacking initramfs...
[ 2.320484] Freeing initrd memory: 17216K (ffff880035e50000 - ffff880036f20000)
[ 2.328830] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.336022] software IO TLB [mem 0x8853f000-0x8c53f000] (64MB) mapped at [ffff88008853f000-ffff88008c53efff]
[ 2.347503] microcode: CPU0 sig=0x206c2, pf=0x1, revision=0xc
[ 2.353923] microcode: CPU1 sig=0x206c2, pf=0x1, revision=0xc
[ 2.360338] microcode: CPU2 sig=0x206c2, pf=0x1, revision=0xc
[ 2.366745] microcode: CPU3 sig=0x206c2, pf=0x1, revision=0xc
[ 2.373160] microcode: CPU4 sig=0x206c2, pf=0x1, revision=0xc
[ 2.379569] microcode: CPU5 sig=0x206c2, pf=0x1, revision=0xc
[ 2.385985] microcode: CPU6 sig=0x206c2, pf=0x1, revision=0xc
[ 2.392400] microcode: CPU7 sig=0x206c2, pf=0x1, revision=0xc
[ 2.398806] microcode: CPU8 sig=0x206c2, pf=0x1, revision=0xc
[ 2.405212] microcode: CPU9 sig=0x206c2, pf=0x1, revision=0xc
[ 2.411626] microcode: CPU10 sig=0x206c2, pf=0x1, revision=0xc
[ 2.418138] microcode: CPU11 sig=0x206c2, pf=0x1, revision=0xc
[ 2.424688] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.435021] futex hash table entries: 8192 (order: 7, 524288 bytes)
[ 2.442174] audit: initializing netlink subsys (disabled)
[ 2.448219] audit: type=2000 audit(1458828010.964:1): initialized
[ 2.455297] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.462411] zbud: loaded
[ 2.465505] VFS: Disk quotas dquot_6.5.2
[ 2.469917] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.477176] msgmni has been set to 7800
[ 2.481754] alg: No test for stdrng (krng)
[ 2.486370] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 2.494679] io scheduler noop registered
[ 2.499050] io scheduler deadline registered
[ 2.503865] io scheduler cfq registered (default)
[ 2.510754] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 2.518518] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 2.525804] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 2.533101] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
[ 2.540880] pcieport 0000:00:05.0: Signaling PME through PCIe PME interrupt
[ 2.548652] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 2.555929] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[ 2.563225] pcieport 0000:00:07.0: Signaling PME through PCIe PME interrupt
[ 2.570997] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[ 2.578284] pci 0000:06:00.1: Signaling PME through PCIe PME interrupt
[ 2.585579] pcieport 0000:00:09.0: Signaling PME through PCIe PME interrupt
[ 2.593349] pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
[ 2.600653] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.608441] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt
[ 2.616214] pci 0000:0b:00.0: Signaling PME through PCIe PME interrupt
[ 2.623507] ioapic: probe of 0000:00:13.0 failed with error -22
[ 2.630120] ioapic: probe of 0000:00:15.0 failed with error -22
[ 2.636739] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.643003] pciehp 0000:00:1c.0:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
[ 2.654890] pciehp 0000:00:1c.4:pcie04: Slot #5 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl- LLActRep+
[ 2.666772] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.674660] ERST: Error Record Serialization Table (ERST) support is initialized.
[ 2.683016] pstore: Registered erst as persistent store backend
[ 2.690017] GHES: APEI firmware first mode is enabled by WHEA _OSC.
[ 2.697090] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.724497] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.753098] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[ 2.761559] Linux agpgart interface v0.103
[ 2.766292] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 3.799445] i8042: No controller found
[ 3.803640] tsc: Refined TSC clocksource calibration: 2666.634 MHz
[ 3.810612] mousedev: PS/2 mouse device common for all mice
[ 3.816865] rtc_cmos 00:00: RTC can wake from S4
[ 3.822139] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 3.828964] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 3.837530] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.844719] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 3.851908] AMD IOMMUv2 functionality not available on this system
[ 3.858888] TCP: cubic registered
[ 3.862800] NET: Registered protocol family 10
[ 3.868359] mip6: Mobile IPv6
[ 3.871674] NET: Registered protocol family 17
[ 3.876638] mpls_gso: MPLS GSO support
[ 3.881263] registered taskstats version 1
[ 3.886990] rtc_cmos 00:00: setting system clock to 2016-03-24 14:00:14 UTC (1458828014)
[ 3.898687] Freeing unused kernel memory: 1208K (ffffffff818ec000 - ffffffff81a1a000)
[ 3.907428] Write protecting the kernel read-only data: 8192k
[ 3.917140] Freeing unused kernel memory: 688K (ffff880001554000 - ffff880001600000)
[ 3.927207] Freeing unused kernel memory: 216K (ffff8800017ca000 - ffff880001800000)
Loading, please wait...
[ 3.947872] systemd-udevd[116]: starting version 215
[ 3.953703] random: systemd-udevd urandom read with 3 bits of entropy available
[ 3.969934] pps_core: LinuxPPS API ver. 1 registered
[ 3.975480] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 3.986076] SCSI subsystem initialized
[ 3.990332] PTP clock support registered
[ 3.995134] dca service started, version 1.12.1
[ 4.001703] ACPI: bus type USB registered
[ 4.006344] usbcore: registered new interface driver usbfs
[ 4.012480] usbcore: registered new interface driver hub
[ 4.018529] usbcore: registered new device driver usb
[ 4.026300] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
[ 4.034089] igb: Copyright (c) 2007-2014 Intel Corporation.
[ 4.041790] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.050040] ehci-pci: EHCI PCI platform driver
[ 4.055198] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 4.055226] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.068129] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.076406] ehci-pci 0000:00:1a.7: debug port 1
[ 4.084471] mvsas 0000:09:00.0: mvsas: driver version 0.8.16
[ 4.085374] ehci-pci 0000:00:1a.7: irq 19, io mem 0xb3322000
[ 4.093018] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.093065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.093066] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.093067] usb usb1: Product: EHCI Host Controller
[ 4.093068] usb usb1: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 ehci_hcd
[ 4.093069] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.093293] hub 1-0:1.0: USB hub found
[ 4.093298] hub 1-0:1.0: 6 ports detected
[ 4.093560] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.093564] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.093578] ehci-pci 0000:00:1d.7: debug port 1
[ 4.097485] ehci-pci 0000:00:1d.7: irq 16, io mem 0xb3321000
[ 4.105070] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.105102] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.105104] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.105105] usb usb2: Product: EHCI Host Controller
[ 4.105106] usb usb2: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 ehci_hcd
[ 4.105107] usb usb2: SerialNumber: 0000:00:1d.7
[ 4.105334] hub 2-0:1.0: USB hub found
[ 4.105338] hub 2-0:1.0: 6 ports detected
[ 4.105814] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl SATA mode
[ 4.105816] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
[ 4.107048] scsi0 : ahci
[ 4.240465] mvsas 0000:09:00.0: mvsas: PCI-E x4, Bandwidth Usage: 2.5 Gbps
[ 4.240625] scsi2 : ahci
[ 4.240989] scsi3 : ahci
[ 4.241318] scsi4 : ahci
[ 4.241587] scsi5 : ahci
[ 4.241891] scsi6 : ahci
[ 4.241942] ata1: SATA max UDMA/133 abar m2048@0xb3320000 port 0xb3320100 irq 81
[ 4.241944] ata2: SATA max UDMA/133 abar m2048@0xb3320000 port 0xb3320180 irq 82
[ 4.241944] ata3: DUMMY
[ 4.241945] ata4: DUMMY
[ 4.241945] ata5: DUMMY
[ 4.241946] ata6: DUMMY
[ 4.242163] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.242168] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.242176] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 4.242198] uhci_hcd 0000:00:1a.0: irq 19, io base 0x000050e0
[ 4.242241] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.242242] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.242243] usb usb3: Product: UHCI Host Controller
[ 4.242244] usb usb3: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
[ 4.242245] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.242363] hub 3-0:1.0: USB hub found
[ 4.242369] hub 3-0:1.0: 2 ports detected
[ 4.242560] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.242564] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.242570] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 4.242591] uhci_hcd 0000:00:1a.1: irq 19, io base 0x000050c0
[ 4.242635] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.242636] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.242638] usb usb4: Product: UHCI Host Controller
[ 4.242638] usb usb4: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
[ 4.242639] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.242754] hub 4-0:1.0: USB hub found
[ 4.242759] hub 4-0:1.0: 2 ports detected
[ 4.242948] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 4.242953] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 4.242960] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 4.242981] uhci_hcd 0000:00:1a.2: irq 19, io base 0x000050a0
[ 4.243022] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.243023] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.243024] usb usb5: Product: UHCI Host Controller
[ 4.243025] usb usb5: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
[ 4.243026] usb usb5: SerialNumber: 0000:00:1a.2
[ 4.243136] hub 5-0:1.0: USB hub found
[ 4.243141] hub 5-0:1.0: 2 ports detected
[ 4.243333] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.243337] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 4.243343] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 4.243363] uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005080
[ 4.243404] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.243405] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.243406] usb usb6: Product: UHCI Host Controller
[ 4.243407] usb usb6: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
[ 4.243408] usb usb6: SerialNumber: 0000:00:1d.0
[ 4.243518] hub 6-0:1.0: USB hub found
[ 4.243522] hub 6-0:1.0: 2 ports detected
[ 4.243716] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.243720] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 4.243726] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 4.243746] uhci_hcd 0000:00:1d.1: irq 16, io base 0x00005060
[ 4.243786] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.243788] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.243789] usb usb7: Product: UHCI Host Controller
[ 4.243790] usb usb7: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
[ 4.243791] usb usb7: SerialNumber: 0000:00:1d.1
[ 4.243905] hub 7-0:1.0: USB hub found
[ 4.243910] hub 7-0:1.0: 2 ports detected
[ 4.244104] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.244108] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 4.244114] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 4.244134] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00005040
[ 4.244174] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.244176] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.244177] usb usb8: Product: UHCI Host Controller
[ 4.244177] usb usb8: Manufacturer: Linux 3.16.0-0.bpo.4-amd64 uhci_hcd
[ 4.244178] usb usb8: SerialNumber: 0000:00:1d.2
[ 4.244290] hub 8-0:1.0: USB hub found
[ 4.244295] hub 8-0:1.0: 2 ports detected
[ 4.407632] igb 0000:01:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 4.407634] igb 0000:01:00.0: eth0: (PCIe:2.5Gb/s:Width x4) 00:15:17:a2:87:f8
[ 4.407636] igb 0000:01:00.0: eth0: PBA No: Unknown
[ 4.407637] igb 0000:01:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 4.561047] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.561071] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.563212] ata2.00: supports DRM functions and may not be fully accessible
[ 4.563217] ata1.00: supports DRM functions and may not be fully accessible
[ 4.563550] ata2.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM02B6Q, max UDMA/133
[ 4.563552] ata2.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 4.563557] ata1.00: ATA-9: Samsung SSD 850 PRO 256GB, EXM02B6Q, max UDMA/133
[ 4.563558] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 4.564284] ata2.00: supports DRM functions and may not be fully accessible
[ 4.564288] ata1.00: supports DRM functions and may not be fully accessible
[ 4.564789] ata2.00: configured for UDMA/133
[ 4.564795] ata1.00: configured for UDMA/133
[ 4.565078] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 4.565743] scsi 2:0:0:0: Direct-Access ATA Samsung SSD 850 2B6Q PQ: 0 ANSI: 5
[ 4.761781] igb 0000:01:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 4.761782] igb 0000:01:00.1: eth1: (PCIe:2.5Gb/s:Width x4) 00:15:17:a2:87:f9
[ 4.761784] igb 0000:01:00.1: eth1: PBA No: Unknown
[ 4.761785] igb 0000:01:00.1: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
[ 4.861789] Switched to clocksource tsc
[ 4.874776] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 4.874828] sd 2:0:0:0: [sdb] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 4.874870] sd 2:0:0:0: [sdb] Write Protect is off
[ 4.874882] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.877054] sdb: sdb1
[ 4.877303] sd 2:0:0:0: [sdb] Attached SCSI disk
[ 4.914729] sd 0:0:0:0: [sda] Write Protect is off
[ 4.920088] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 4.932406] sda: sda1
[ 4.935273] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.943805] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.949955] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 5.073107] usb 1-3: new high-speed USB device number 2 using ehci-pci
[ 5.145985] igb 0000:03:00.0: added PHC on eth2
[ 5.151045] igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.158717] igb 0000:03:00.0: eth2: (PCIe:2.5Gb/s:Width x4) 00:1b:21:8e:d2:88
[ 5.166682] igb 0000:03:00.0: eth2: PBA No: Unknown
[ 5.172123] igb 0000:03:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 5.212967] usb 1-3: New USB device found, idVendor=0951, idProduct=1665
[ 5.220442] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.228406] usb 1-3: Product: DataTraveler 2.0
[ 5.233371] usb 1-3: Manufacturer: Kingston
[ 5.238042] usb 1-3: SerialNumber: 50E549C342A7BE40496D004E
[ 5.247988] usb-storage 1-3:1.0: USB Mass Storage device detected
[ 5.255168] scsi7 : usb-storage 1-3:1.0
[ 5.259514] usbcore: registered new interface driver usb-storage
[ 5.517860] igb 0000:03:00.1: added PHC on eth3
[ 5.522919] igb 0000:03:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 5.530592] igb 0000:03:00.1: eth3: (PCIe:2.5Gb/s:Width x4) 00:1b:21:8e:d2:89
[ 5.538555] igb 0000:03:00.1: eth3: PBA No: Unknown
[ 5.543997] igb 0000:03:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 5.741001] usb 5-1: new full-speed USB device number 2 using uhci_hcd
[ 5.889959] igb 0000:06:00.0: added PHC on eth4
[ 5.895033] igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
[ 5.902705] igb 0000:06:00.0: eth4: (PCIe:2.5Gb/s:Width x4) 00:1b:21:8e:d2:40
[ 5.907048] usb 5-1: New USB device found, idVendor=046b, idProduct=ff10
[ 5.907050] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.907051] usb 5-1: Product: Virtual Keyboard and Mouse
[ 5.907052] usb 5-1: Manufacturer: American Megatrends Inc.
[ 5.907053] usb 5-1: SerialNumber: serial
[ 5.942714] igb 0000:06:00.0: eth4: PBA No: Unknown
[ 5.948158] igb 0000:06:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 5.957631] hidraw: raw HID events driver (C) Jiri Kosina
[ 5.975170] usbcore: registered new interface driver usbhid
[ 5.981400] usbhid: USB HID core driver
[ 5.988782] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.0/0003:046B:FF10.0001/input/input0
[ 6.004620] hid-generic 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10 Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input0
[ 6.021239] input: American Megatrends Inc. Virtual Keyboard and Mouse as /devices/pci0000:00/0000:00:1a.2/usb5/5-1/5-1:1.1/0003:046B:FF10.0002/input/input1
[ 6.037239] hid-generic 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10 Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on usb-0000:00:1a.2-1/input1
[ 6.258282] scsi 7:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 6
[ 6.267796] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 6.268865] sd 7:0:0:0: [sdc] 30720000 512-byte logical blocks: (15.7 GB/14.6 GiB)
[ 6.270235] sd 7:0:0:0: [sdc] Write Protect is off
[ 6.271501] sd 7:0:0:0: [sdc] No Caching mode page found
[ 6.271502] sd 7:0:0:0: [sdc] Assuming drive cache: write through
[ 6.277721] sdc: sdc1
[ 6.282084] sd 7:0:0:0: [sdc] Attached SCSI removable disk
[ 6.293817] igb 0000:06:00.1: added PHC on eth5
[ 6.293818] igb 0000:06:00.1: Intel(R) Gigabit Ethernet Network Connection
[ 6.293819] igb 0000:06:00.1: eth5: (PCIe:2.5Gb/s:Width x4) 00:1b:21:8e:d2:41
[ 6.293821] igb 0000:06:00.1: eth5: PBA No: Unknown
[ 6.293822] igb 0000:06:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
[ 7.644527] scsi1 : mvsas
[ 7.935337] ata10.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.936563] ata22.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
[ 7.936564] ata21.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.936566] ata22.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.936567] ata21.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.936586] ata19.00: ATA-8: WDC WD1003FBYX-01Y7B1, 01.01V02, max UDMA/133
[ 7.936587] ata19.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.937836] ata20.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.937837] ata20.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.937859] ata13.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.937860] ata13.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.938670] ata19.00: configured for UDMA/133
[ 7.938751] ata21.00: configured for UDMA/133
[ 7.938753] ata22.00: configured for UDMA/133
[ 7.939110] ata18.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.939111] ata18.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.939761] ata20.00: configured for UDMA/133
[ 7.940194] ata15.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.940196] ata15.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.940424] ata7.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.940425] ata13.00: configured for UDMA/133
[ 7.940426] ata7.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.941029] ata9.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.941030] ata9.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.941384] ata12.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.941386] ata12.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.941681] ata18.00: configured for UDMA/133
[ 7.942313] ata15.00: configured for UDMA/133
[ 7.942383] ata7.00: configured for UDMA/133
[ 7.942584] ata16.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.942585] ata16.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.942875] ata14.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.942876] ata14.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.942877] ata9.00: configured for UDMA/133
[ 7.943119] ata12.00: configured for UDMA/133
[ 7.943844] ata11.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.943846] ata11.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.944134] ata8.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.944136] ata8.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.944361] ata16.00: configured for UDMA/133
[ 7.944647] ata17.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 7.944648] ata17.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 7.945240] ata14.00: configured for UDMA/133
[ 7.945709] ata11.00: configured for UDMA/133
[ 7.946308] ata8.00: configured for UDMA/133
[ 7.947249] ata17.00: configured for UDMA/133
[ 8.245069] ata10.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 8.254981] ata10.00: configured for UDMA/133
[ 8.261196] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.270406] scsi 1:0:1:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.279616] scsi 1:0:2:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.288851] scsi 1:0:3:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.298081] scsi 1:0:4:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.307306] scsi 1:0:5:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.316504] scsi 1:0:6:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.325693] scsi 1:0:7:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.334869] scsi 1:0:8:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.344055] scsi 1:0:9:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.353244] scsi 1:0:10:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.362541] scsi 1:0:11:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.371826] scsi 1:0:12:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 5
[ 8.381109] scsi 1:0:13:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.390395] scsi 1:0:14:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 8.399682] scsi 1:0:15:0: Direct-Access ATA WDC WD1003FBYX-0 1V02 PQ: 0 ANSI: 5
[ 8.411641] scsi 1:0:16:0: Enclosure Areca x28-05.63.1.32 000 PQ: 0 ANSI: 3
[ 8.434295] sd 1:0:0:0: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.434303] sd 1:0:0:0: Attached scsi generic sg3 type 0
[ 8.434620] sd 1:0:1:0: Attached scsi generic sg4 type 0
[ 8.434781] sd 1:0:1:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.434842] sd 1:0:2:0: Attached scsi generic sg5 type 0
[ 8.434859] sd 1:0:2:0: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.435002] sd 1:0:2:0: [sdf] Write Protect is off
[ 8.435023] sd 1:0:1:0: [sde] Write Protect is off
[ 8.435029] sd 1:0:3:0: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.435034] sd 1:0:3:0: Attached scsi generic sg6 type 0
[ 8.435047] sd 1:0:2:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.435073] sd 1:0:1:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.435109] sd 1:0:3:0: [sdg] Write Protect is off
[ 8.435146] sd 1:0:3:0: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.435226] sd 1:0:4:0: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.435277] sd 1:0:4:0: Attached scsi generic sg7 type 0
[ 8.435297] sd 1:0:4:0: [sdh] Write Protect is off
[ 8.435332] sd 1:0:4:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.435445] sd 1:0:5:0: [sdi] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.435484] sd 1:0:5:0: Attached scsi generic sg8 type 0
[ 8.435506] sd 1:0:5:0: [sdi] Write Protect is off
[ 8.435533] sd 1:0:5:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.435631] sd 1:0:6:0: [sdj] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.435673] sd 1:0:6:0: Attached scsi generic sg9 type 0
[ 8.435686] sd 1:0:6:0: [sdj] Write Protect is off
[ 8.435707] sd 1:0:6:0: [sdj] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.435840] sd 1:0:7:0: [sdk] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.435876] sd 1:0:7:0: Attached scsi generic sg10 type 0
[ 8.435885] sd 1:0:7:0: [sdk] Write Protect is off
[ 8.435906] sd 1:0:7:0: [sdk] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.436046] sd 1:0:8:0: [sdl] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.436076] sd 1:0:8:0: Attached scsi generic sg11 type 0
[ 8.436117] sd 1:0:8:0: [sdl] Write Protect is off
[ 8.436145] sd 1:0:8:0: [sdl] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.436221] sd 1:0:9:0: [sdm] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.436250] sd 1:0:9:0: Attached scsi generic sg12 type 0
[ 8.436278] sd 1:0:9:0: [sdm] Write Protect is off
[ 8.436307] sd 1:0:9:0: [sdm] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.436400] sd 1:0:10:0: [sdn] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.436441] sd 1:0:10:0: Attached scsi generic sg13 type 0
[ 8.436468] sd 1:0:10:0: [sdn] Write Protect is off
[ 8.436494] sd 1:0:10:0: [sdn] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.436587] sd 1:0:11:0: [sdo] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.436611] sd 1:0:11:0: [sdo] Write Protect is off
[ 8.436623] sd 1:0:11:0: [sdo] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.436629] sd 1:0:11:0: Attached scsi generic sg14 type 0
[ 8.436806] sd 1:0:12:0: [sdp] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.436837] sd 1:0:12:0: [sdp] Write Protect is off
[ 8.436843] sd 1:0:12:0: Attached scsi generic sg15 type 0
[ 8.436849] sd 1:0:12:0: [sdp] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.437002] sd 1:0:13:0: [sdq] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.437025] sd 1:0:13:0: [sdq] Write Protect is off
[ 8.437033] sd 1:0:13:0: Attached scsi generic sg16 type 0
[ 8.437037] sd 1:0:13:0: [sdq] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.437183] sd 1:0:14:0: [sdr] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.437201] sd 1:0:14:0: Attached scsi generic sg17 type 0
[ 8.437221] sd 1:0:14:0: [sdr] Write Protect is off
[ 8.437233] sd 1:0:14:0: [sdr] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.437346] sd 1:0:15:0: [sds] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 8.437377] sd 1:0:15:0: Attached scsi generic sg18 type 0
[ 8.437379] sd 1:0:15:0: [sds] Write Protect is off
[ 8.437395] sd 1:0:15:0: [sds] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.437545] scsi 1:0:16:0: Attached scsi generic sg19 type 13
[ 8.906966] sdf: sdf1
[ 8.906967] sdh: sdh1
[ 8.906970] sdj: sdj1
[ 8.906976] sdk: sdk1
[ 8.907008] random: nonblocking pool is initialized
[ 8.907041] sdi: sdi1
[ 8.907056] sd 1:0:0:0: [sdd] Write Protect is off
[ 8.907057] sdo: sdo1
[ 8.907063] sdn: sdn1
[ 8.907063] sdg: sdg1
[ 8.907069] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 8.907120] sdr: sdr1
[ 8.907122] sde: sde1
[ 8.907161] sdq: sdq1
[ 8.907334] sd 1:0:6:0: [sdj] Attached SCSI disk
[ 8.907439] sd 1:0:7:0: [sdk] Attached SCSI disk
[ 8.907443] sd 1:0:4:0: [sdh] Attached SCSI disk
[ 8.907472] sd 1:0:5:0: [sdi] Attached SCSI disk
[ 8.907473] sd 1:0:11:0: [sdo] Attached SCSI disk
[ 8.907497] sd 1:0:1:0: [sde] Attached SCSI disk
[ 8.907627] sd 1:0:3:0: [sdg] Attached SCSI disk
[ 8.907630] sd 1:0:13:0: [sdq] Attached SCSI disk
[ 8.907633] sd 1:0:10:0: [sdn] Attached SCSI disk
[ 8.907635] sd 1:0:14:0: [sdr] Attached SCSI disk
[ 8.907781] sdd: sdd1
[ 8.908037] sd 1:0:0:0: [sdd] Attached SCSI disk
[ 9.016447] sdl: sdl1
[ 9.016523] sdp: sdp1
[ 9.016523] sdm: sdm1
[ 9.016554] sds: sds1
[ 9.016864] sd 1:0:12:0: [sdp] Attached SCSI disk
[ 9.016865] sd 1:0:15:0: [sds] Attached SCSI disk
[ 9.017172] sd 1:0:2:0: [sdf] Attached SCSI disk
[ 9.017527] sd 1:0:9:0: [sdm] Attached SCSI disk
[ 9.048146] sd 1:0:8:0: [sdl] Attached SCSI disk
[ 9.865968] ses 1:0:16:0: Attached Enclosure device
Begin: Loading essential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... Begin: Assembling all MD arrays ... [ 24.995296] md: md0 stopped.
[ 24.999204] md: bind<sdl1>
[ 25.002364] md: bind<sdd1>
[ 25.005414] md: kicking non-fresh sdl1 from array!
[ 25.010793] md: unbind<sdl1>
[ 25.048858] md: export_rdev(sdl1)
[ 25.055246] md: raid1 personality registered for level 1
[ 25.061557] md/raid1:md0: active with 1 out of 2 mirrors
[ 25.067514] md0: detected capacity change from 0 to 1000194564096
[ 25.074790] md0: unknown partition table
mdadm: /dev/md0 has been started with 1 drive (out of 2).
[ 25.094025] md: md1 stopped.
[ 25.097936] md: bind<sdm1>
[ 25.101140] md: bind<sde1>
[ 25.105451] md/raid1:md1: not clean -- starting background reconstruction
[ 25.113036] md/raid1:md1: active with 2 out of 2 mirrors
[ 25.119053] md1: detected capacity change from 0 to 1000194564096
[ 25.133208] md1: unknown partition table
mdadm: /dev/md1 has been started with 2 drives.
[ 25.162577] md: md2 stopped.
[ 25.166526] md: bind<sdn1>
[ 25.169770] md: bind<sdf1>
[ 25.174126] md/raid1:md2: not clean -- starting background reconstruction
[ 25.181708] md/raid1:md2: active with 2 out of 2 mirrors
[ 25.187657] md2: detected capacity change from 0 to 1000194564096
[ 25.195006] md2: unknown partition table
mdadm: /dev/md2 has been started with 2 drives.
[ 25.212314] md: bind<sdo1>
[ 25.215568] md: bind<sdg1>
[ 25.219655] md/raid1:md3: not clean -- starting background reconstruction
[ 25.227233] md/raid1:md3: active with 2 out of 2 mirrors
[ 25.233181] md3: detected capacity change from 0 to 1000194564096
[ 25.240542] md3: unknown partition table
mdadm: /dev/md3 has been started with 2 drives.
[ 25.276825] md: bind<sdp1>
[ 25.288959] md: bind<sdh1>
[ 25.293235] md/raid1:md4: not clean -- starting background reconstruction
[ 25.300819] md/raid1:md4: active with 2 out of 2 mirrors
[ 25.306768] md4: detected capacity change from 0 to 1000194564096
[ 25.314052] md4: unknown partition table
mdadm: /dev/md4 has been started with 2 drives.
[ 25.334043] md: bind<sdq1>
[ 25.337275] md: bind<sdi1>
[ 25.341315] md/raid1:md5: not clean -- starting background reconstruction
[ 25.348898] md/raid1:md5: active with 2 out of 2 mirrors
[ 25.354914] md5: detected capacity change from 0 to 1000194564096
[ 25.362083] md5: unknown partition table
mdadm: /dev/md5 has been started with 2 drives.
[ 25.377027] md: bind<sdr1>
[ 25.380172] md: bind<sdj1>
[ 25.384209] md/raid1:md6: not clean -- starting background reconstruction
[ 25.391796] md/raid1:md6: active with 2 out of 2 mirrors
[ 25.397810] md6: detected capacity change from 0 to 1000194564096
[ 25.413166] md6: unknown partition table
mdadm: /dev/md6 has been started with 2 drives.
[ 25.427628] md: md7 stopped.
[ 25.432072] md: bind<sds1>
[ 25.435359] md: bind<sdk1>
[ 25.439365] md/raid1:md7: active with 2 out of 2 mirrors
[ 25.445348] md7: detected capacity change from 0 to 1000194564096
[ 25.478229] md7: unknown partition table
mdadm: /dev/md7 has been started with 2 drives.
Success: assembled all arrays.
done.
[ 25.494297] device-mapper: uevent: version 1.0.3
[ 25.500305] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
done.
Begin: Running /scripts/local-premount ... [ 25.812755] raid6: sse2x1 6628 MB/s
[ 25.884748] raid6: sse2x2 7745 MB/s
[ 25.956750] raid6: sse2x4 8520 MB/s
[ 25.960931] raid6: using algorithm sse2x4 (8520 MB/s)
[ 25.966566] raid6: using ssse3x2 recovery algorithm
[ 25.975368] xor: measuring software checksum speed
[ 26.020697] prefetch64-sse: 11174.000 MB/sec
[ 26.064696] generic_sse: 9862.000 MB/sec
[ 26.069459] xor: using function: prefetch64-sse (11174.000 MB/sec)
[ 26.082175] Btrfs loaded
Scanning for Btrfs filesystems
done.
Begin: Checking root file system ... fsck from util-linux 2.25.2
/dev/mapper/lvm0--vol-root: clean, 82682/983040 files, 1825160/3932160 blocks
[ 26.610536] md: resync of RAID array md4
[ 26.614917] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 26.621419] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 26.631905] md: using 128k window, over a total of 976752504k.
[ 26.638412] md: resuming resync of md4 from checkpoint.
[ 26.640073] md: resync of RAID array md1
[ 26.640074] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 26.640074] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 26.640077] md: using 128k window, over a total of 976752504k.
[ 26.640077] md: resuming resync of md1 from checkpoint.
[ 26.668421] md: resync of RAID array md2
[ 26.668422] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 26.668423] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 26.668425] md: using 128k window, over a total of 976752504k.
[ 26.668426] md: resuming resync of md2 from checkpoint.
[ 26.694811] md: resync of RAID array md3
[ 26.694812] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 26.694812] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 26.694815] md: using 128k window, over a total of 976752504k.
[ 26.694816] md: resuming resync of md3 from checkpoint.
[ 26.717721] md: resync of RAID array md5
[ 26.717722] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 26.717723] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 26.717725] md: using 128k window, over a total of 976752504k.
[ 26.717726] md: resuming resync of md5 from checkpoint.
[ 26.746867] md: resync of RAID array md6
[ 26.746868] md: minimum _guaranteed_ speed: 1000 KB/sec/disk.
[ 26.746869] md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
[ 26.746871] md: using 128k window, over a total of 976752504k.
[ 26.746872] md: resuming resync of md6 from checkpoint.
done.
[ 26.854157] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
done.
Begin: Running /scripts/local-bottom ... done.
Begin: Running /scripts/init-bottom ... done.
INIT: version 2.88 booting
[info] Using makefile-style concurrent boot in runlevel S.
[....] Starting the hotplug events dispatcher: udevd[ 28.704925] systemd-udevd[517]: starting version 215
. ok
[ ok ] Synthesizing the initial hotplug events...done.
[....] Waiting for /dev to be fully populated...[ 29.000393] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 29.009724] ACPI: Sleep Button [SLPB]
[ 29.013906] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 29.013999] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 29.014001] ACPI: Power Button [PWRF]
[ 29.035521] ipmi message handler version 39.2
[ 29.051486] IPMI System Interface driver.
[ 29.055998] ipmi_si: probing via ACPI
[ 29.060099] ipmi_si 00:04: [io 0x0ca2] regsize 1 spacing 1 irq 0
[ 29.066904] ipmi_si: Adding ACPI-specified kcs state machine
[ 29.073278] ipmi_si: probing via SMBIOS
[ 29.077564] ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
[ 29.084173] ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
[ 29.092627] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
[ 29.245943] ipmi_si 00:04: Found new BMC (man_id: 0x000157, prod_id: 0x003e, dev_id: 0x21)
[ 29.255189] ipmi_si 00:04: IPMI kcs interface initialized
[ 29.263708] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 29.271315] EDAC MC: Ver: 3.0.0
[ 29.271328] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 29.281928] igb 0000:01:00.0: DCA enabled
[ 29.286440] igb 0000:01:00.1: DCA enabled
[ 29.291254] igb 0000:03:00.0: DCA enabled
[ 29.295761] igb 0000:03:00.1: DCA enabled
[ 29.300578] igb 0000:06:00.0: DCA enabled
[ 29.305082] igb 0000:06:00.1: DCA enabled
[ 29.311321] EDAC MC0: Giving out device to module i7core_edac.c controller i7 core #0: DEV 0000:ff:03.0 (POLLED)
[ 29.322730] EDAC PCI0: Giving out device to module i7core_edac controller EDAC PCI controller: DEV 0000:ff:03.0 (POLLED)
[ 29.335042] EDAC i7core: Driver loaded, 1 memory controller(s) found.
[ 29.343653] [drm] Initialized drm 1.1.0 20060810
[ 29.349324] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000428-0x000000000000042f (\GPE0) (20140424/utaddress-258)
[ 29.366633] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 29.378016] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000052f (\_SI_.SIOR) (20140424/utaddress-258)
[ 29.395793] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 29.407256] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 29.423711] SSE version of gcm_enc/dec engaged.
[ 29.431481] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 29.450859] alg: No test for crc32 (crc32-pclmul)
[ 29.487789] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
done.
[FAIL] RAID status not OK. Exiting. ... failed!
[ ok ] Generating udev events for MD arrays...done.
[ ok ] Activating swap...done.
[ 30.711320] EXT4-fs (dm-0): re-mounted. Opts: (null)
[....] Checking root file system...fsck from util-linux 2.25.2
e2fsck 1.42.12 (29-Aug-2014)
/dev/mapper/lvm0--vol-root: clean, 82682/983040 files, 1825160/3932160 blocks
done.
[ 30.853595] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ ok ] Cleaning up temporary files... /tmp.
[ ok ] Starting early crypto disks...done.
[ 31.255081] 8021q: 802.1Q VLAN Support v1.8
[ 31.272157] ipmi device interface
[ 31.302002] fuse init (API version 7.23)
[info] Loading kernel module 8021q.
[info] Loading kernel module ipmi_si.
[info] Loading kernel module ipmi_devintf.
[info] Loading kernel module fuse.
[ 31.823622] async_tx: api initialized (async)
[ 31.844227] md: raid10 personality registered for level 10
[ 31.866705] md: raid6 personality registered for level 6
[ 31.872635] md: raid5 personality registered for level 5
[ 31.878566] md: raid4 personality registered for level 4
[ 31.894995] device-mapper: raid: Loading target version 1.5.2
[ 31.909521] md/raid1:mdX: active with 2 out of 2 mirrors
[ 31.915618] mdX: invalid bitmap file superblock: bad magic
[ 31.921758] created bitmap (238 pages) for device mdX
[ 31.962126] mdX: bitmap initialized from disk: read 15 pages, set 1 of 486304 bits
[ 31.984256] md/raid1:mdX: active with 2 out of 2 mirrors
[ 31.990401] mdX: invalid bitmap file superblock: bad magic
[ 31.996530] created bitmap (1 pages) for device mdX
[ 32.041351] mdX: bitmap initialized from disk: read 1 pages, set 0 of 1024 bits
[....] Setting up LVM Volume Groups...[ 37.136043] device-mapper: cache-policy-mq: version 1.2.0 loaded
done.
[ ok ] Starting remaining crypto disks...done.
[....] Activating lvm and md swap...[ 39.378187] Adding 524284k swap on /dev/mapper/lvm0--vol-swap. Priority:-1 extents:1 across:524284k FS
done.
[....] Checking file systems...fsck from util-linux 2.25.2
e2fsck 1.42.12 (29-Aug-2014)
/dev/mapper/lvm0--vol-home: clean, 27/1310720 files, 126303/5242880 blocks
e2fsck 1.42.12 (29-Aug-2014)
/dev/mapper/lvm0--vol-storage: clean, 37032936/486047744 files, 1364444277/1944190976 blocks
done.
[....] Mounting local filesystems...[ 43.793374] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
[ 44.026033] EXT4-fs (dm-14): mounted filesystem with ordered data mode. Opts: (null)
done.
[ ok ] Activating swapfile swap...done.
[ ok ] Cleaning up temporary files....
[ ok ] Setting kernel variables ...done.
[ 44.877233] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[ 44.885211] bonding: MII link monitoring set to 100 ms
[ 44.897289] bonding: bond0: Adding slave eth0
[ 44.902222] igb 0000:01:00.0: changing MTU from 1500 to 9000
[ 45.292174] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.298735] 8021q: adding VLAN 0 to HW filter on device eth0
[ 45.305466] bonding: bond0: Enslaving eth0 as a backup interface with a down link
[ 45.317078] bonding: bond0: Adding slave eth1
[ 45.321964] igb 0000:01:00.1: changing MTU from 1500 to 9000
[ 45.695251] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 45.701769] 8021q: adding VLAN 0 to HW filter on device eth1
[ 45.708421] bonding: bond0: Enslaving eth1 as a backup interface with a down link
[ 45.720036] bonding: bond0: Adding slave eth2
[ 45.724934] igb 0000:03:00.0: changing MTU from 1500 to 9000
[ 46.131477] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
[ 46.137998] 8021q: adding VLAN 0 to HW filter on device eth2
[ 46.144692] bonding: bond0: Enslaving eth2 as a backup interface with a down link
[ 46.156206] bonding: bond0: Adding slave eth3
[ 46.161101] igb 0000:03:00.1: changing MTU from 1500 to 9000
[ 46.563138] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
[ 46.569657] 8021q: adding VLAN 0 to HW filter on device eth3
[ 46.576315] bonding: bond0: Enslaving eth3 as a backup interface with a down link
[ 47.050775] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
[ 47.057397] 8021q: adding VLAN 0 to HW filter on device bond0
[....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.1
Copyright 2004-2014 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/
Listening on LPF/bond0/00:15:17:a2:87:f8
Sending on LPF/bond0/00:15:17:a2:87:f8
Sending on Socket/fallback
DHCPDISCOVER on bond0 to 255.255.255.255 port 67 interval 6
[ 48.024959] igb 0000:01:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 48.048516] bonding: bond0: link status up for interface eth0, enabling it in 0 ms
[ 48.057144] bonding: bond0: link status definitely up for interface eth0, 1000 Mbps full duplex
[ 48.066861] bonding: bond0: now running without any active interface!
[ 48.074203] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
[ 48.200961] igb 0000:01:00.1 eth1: igb: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 48.272501] bonding: bond0: link status up for interface eth1, enabling it in 400 ms
[ 48.640907] igb 0000:03:00.0 eth2: igb: eth2 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 48.680530] bonding: bond0: link status up for interface eth2, enabling it in 400 ms
[ 48.689320] bonding: bond0: link status definitely up for interface eth1, 1000 Mbps full duplex
[ 49.012923] igb 0000:03:00.1 eth3: igb: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 49.096501] bonding: bond0: link status up for interface eth3, enabling it in 400 ms
[ 49.105345] bonding: bond0: link status definitely up for interface eth2, 1000 Mbps full duplex
[ 49.512628] bonding: bond0: link status definitely up for interface eth3, 1000 Mbps full duplex
DHCPDISCOVER on bond0 to 255.255.255.255 port 67 interval 12
DHCPDISCOVER on bond0 to 255.255.255.255 port 67 interval 18
DHCPREQUEST on bond0 to 255.255.255.255 port 67
DHCPOFFER from 192.168.22.246
DHCPACK from 192.168.22.246
bound to 192.168.22.87 -- renewal in 8848 seconds.
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 6 to IF -:bond0:-
Set name-type for VLAN subsystem. Should be visible in /proc/net/vlan/config
Added VLAN with VID == 10 to IF -:bond0:-
done.
[ ok ] Starting rpcbind daemon....
[ 68.052144] RPC: Registered named UNIX socket transport module.
[ 68.058760] RPC: Registered udp transport module.
[ 68.064039] RPC: Registered tcp transport module.
[ 68.069288] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 68.120057] FS-Cache: Loaded
[ 68.214163] FS-Cache: Netfs 'nfs' registered for caching
[ 68.364873] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Cleaning up temporary files....
[ ok ] Setting up X socket directories... /tmp/.X11-unix /tmp/.ICE-unix.
[ 68.863621] Loading iSCSI transport class v2.0-870.
[ 68.940629] iscsi: registered transport (tcp)
[ ok ] Starting zfs-fuse: zfs-fuse.
[ ok ] Immunizing zfs-fuse against OOM kills and sendsigs signals...done.
[ ok ] Mounting ZFS filesystems...done.
[....] Starting iSCSI initiator service: iscsid[ 69.204396] iscsi: registered transport (iser)
. ok
[....] Setting up iSCSI targets:
Logging in to [iface: default, target: iqn.2011-03.nl.powercraft:storage.iscsi0, portal: 192.168.31.10,3260] (multiple)
Logging in to [iface: default, target: iqn.2013-06.nl.powercraft:storage.iscsi1, portal: 192.168.35.10,3260] (multiple)
[ 69.759536] scsi8 : iSCSI Initiator over TCP/IP
[ 69.768658] scsi9 : iSCSI Initiator over TCP/IP
[ 70.027287] scsi 8:0:0:0: RAID IET Controller 0001 PQ: 0 ANSI: 5
[ 70.027514] scsi 9:0:0:0: RAID IET Controller 0001 PQ: 0 ANSI: 5
[ 70.028853] scsi 9:0:0:0: Attached scsi generic sg20 type 12
[ 70.029661] scsi 9:0:0:1: Direct-Access IET VIRTUAL-DISK 0001 PQ: 0 ANSI: 5
[ 70.030420] sd 9:0:0:1: Attached scsi generic sg21 type 0
[ 70.030985] sd 9:0:0:1: [sdt] 15568781240 512-byte logical blocks: (7.97 TB/7.24 TiB)
[ 70.030991] scsi 9:0:0:2: Direct-Access IET VIRTUAL-DISK 0001 PQ: 0 ANSI: 5
[ 70.031837] sd 9:0:0:1: [sdt] Write Protect is off
[ 70.031864] sd 9:0:0:2: Attached scsi generic sg22 type 0
[ 70.032151] sd 9:0:0:1: [sdt] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 70.032337] sd 9:0:0:2: [sdu] 15568781240 512-byte logical blocks: (7.97 TB/7.24 TiB)
[ 70.032983] sd 9:0:0:2: [sdu] Write Protect is off
[ 70.033312] sd 9:0:0:2: [sdu] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 70.036145] sdt: unknown partition table
[ 70.037578] sdu: unknown partition table
[ 70.139816] scsi 8:0:0:0: Attached scsi generic sg23 type 12
[ 70.142010] sd 9:0:0:2: [sdu] Attached SCSI disk
[ 70.142186] sd 9:0:0:1: [sdt] Attached SCSI disk
[ 70.157278] scsi 8:0:0:1: Direct-Access IET VIRTUAL-DISK 0001 PQ: 0 ANSI: 5
[ 70.167121] sd 8:0:0:1: Attached scsi generic sg24 type 0
[ 70.173880] sd 8:0:0:1: [sdv] 15031926712 512-byte logical blocks: (7.69 TB/6.99 TiB)
Login to [iface:[ 70.183567] sd 8:0:0:1: [sdv] Write Protect is off
default, target[ 70.190155] sd 8:0:0:1: [sdv] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
: iqn.2011-03.nl.powercraft:storage.iscsi0, po[ 70.204734] sdv: unknown partition table
rtal: 192.168.31.10,3260] succes[ 70.212762] sd 8:0:0:1: [sdv] Attached SCSI disk
sful.
Login to [iface: default, target: iqn.2013-06.nl.powercraft:storage.iscsi1, portal: 192.168.35.10,3260] successful.
. ok
[....] Activating iSCSI volume groups: lvm1-vol lvm2-vol lvm3-vol 21 logical volume(s) in volume group "lvm1-vol" now active
3 logical volume(s) in volume group "lvm2-vol" now active
2 logical volume(s) in volume group "lvm3-vol" now active
. ok
[ ok ] Mounting network filesystems:.
[ ok ] Enabling network swap devices:.
INIT: Entering runlevel: 2
[info] Using makefile-style concurrent boot in runlevel 2.
[ ok ] Starting NFS common utilities: statd idmapd.
[ ok ] Starting vnStat daemon: vnstatd.
[ ok ] Updating the system logo...done.
[ 73.096173] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 73.118840] NFSD: starting 90-second grace period (net ffffffff818b77c0)
[ ok ] Starting enhanced syslogd: rsyslogd.
[ ok ] Starting MD monitoring service: mdadm --monitor.
[ ok ] Exporting directories for NFS kernel daemon....
[ ok ] Starting NFS kernel daemon: nfsd mountd.
Starting openntpd: ntp_adjtime returns frequency of 0.000000ppm
ntp_adjtime returns frequency of 0.000000ppm
ntp_adjtime adjusted frequency by -4.190948ppm
ntpd.
[ ok ] Starting periodic command scheduler: cron.
[ ok ] Starting ACPI services....
Starting UPS power management: apcupsd.
[ ok ] Starting system message bus: dbus.
[ ok ] Starting OpenBSD Secure Shell server: sshd.
[ ok ] Starting cgroup management daemon: cgmanager[....] Starting cgroup management proxy daemon: cgproxy.
[ ok ] Starting Postfix Mail Transport Agent: postfix.
[ ok ] Starting Munin-Node: done.
[ ok ] Starting libvirt management daemon: libvirtd.
_,met$$$$$gg.
,g$$$$$$$$$$$$$$$P.
,g$$P"" """Y$$.".
,$$P' `$$$.
',$$P ,ggs. `$$b:
`d$$' ,$P"' . $$$ ,#.
$$P d$' , $$P ##: :## :###:
$$: $$. - ,d$$' ##' `## `#'
$$; Y$b._ _,d$P' __ ## __ ## __ _ __ _
Y$$. `.`"Y$$$$P"' ,####:## ,######. ##.#####. :### ,######. ###.####:
`$$b "-.__ ,##' `### ##: :## ###' `### ##' #: `## `###' `##:
`Y$$b ## `## ## ## ##' `## ## ___,## ##: `##
`Y$$. ## ## #######: ## ## ## .####### ##' ##
`$$b. ## ## ##' ## ## ## ##' `## ## ##
`Y$$b. ##. ,## ## ## ,## ## ## ## ## ##
`"Y$b._ :#:._,### ##:__,## ##:__,##' ,##. ##.__:##. ## ##
`"""" `:#### ### ######' `######' #### `#####"## ## ##
Debian Version 8.3
Linux Version 3.16.0-0.bpo.4-amd64, Compiled #1 SMP Debian 3.16.7-ckt11-1+deb8u6~bpo70+1 (2015-11-11)
12 1.6GHz Intel Pentium Xeon Processors, 4GB RAM, 63995 Bogomips Total
yadira
Debian GNU/Linux 8 yadira ttyS0
yadira login:
root@yadira:~# uname -a
Linux yadira 3.16.0-0.bpo.4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u6~bpo70+1 (2015-11-11) x86_64 GNU/Linux
root@yadira:~# lvconvert --version
LVM version: 2.02.111(2) (2014-09-01)
Library version: 1.02.90 (2014-09-01)
Driver version: 4.27.0
Reply to: