--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-2.6.32-5-amd64: Loading acpi/processor causes hanging or reboot
- From: Thomas Nilsson <Thomas.Nilsson@fro.se>
- Date: Thu, 29 Sep 2011 12:10:33 +0200
- Message-id: <20110929101033.2765.38933.reportbug@server.grimsta.fro.se>
Package: linux-2.6
Version: 2.6.32-35squeeze2
Severity: important
Tags: d-i upstream
This problem hinders the booting on (at least) this specific HW.
Originally I thought this was a udev problem but some tracing revealed
that the basic problem is that the machine locks up or do a spontaneous
reboot when loading the kernel module acpi/processor.
>From a user view the booting stops when udev tries to populate the devices.
If I disable the loading and do a manual modprobe the machine either locks up
or sometimes do a spontaneous reboot after some seconds.
I have tried to figure out more precisely what is happening but I have not
managed to get a decent kernel-dump. (And this is a production machine so
I had to put it back in service...)
The easy fix, which I am using now is
blacklist processor
in /etc/modprobe.d/blacklist.conf
-- Package-specific info:
** Version:
Linux version 2.6.32-5-amd64 (Debian 2.6.32-35squeeze2) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Fri Sep 9 20:23:16 UTC 2011
** Command line:
BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=a7452738-dfe6-406b-acac-9f7225991b18 ro quiet
** Not tainted
** Kernel log:
[ 4.902298] registered panic notifier
[ 4.902302] [drm] Initialized radeon 2.0.0 20080528 for 0000:11:07.0 on minor 0
[ 5.084262] usb 1-1: new high speed USB device using ehci_hcd and address 2
[ 5.217398] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[ 5.217403] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.217495] usb 1-1: configuration #1 chosen from 1 choice
[ 5.217662] hub 1-1:1.0: USB hub found
[ 5.217768] hub 1-1:1.0: 6 ports detected
[ 5.279923] Adding 9765880k swap on /dev/sda2. Priority:-1 extents:1 across:9765880k
[ 5.320524] Adding 9765880k swap on /dev/sdb2. Priority:-2 extents:1 across:9765880k
[ 5.328837] usb 2-1: new high speed USB device using ehci_hcd and address 2
[ 5.460475] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[ 5.460478] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 5.460544] usb 2-1: configuration #1 chosen from 1 choice
[ 5.460618] hub 2-1:1.0: USB hub found
[ 5.460721] hub 2-1:1.0: 6 ports detected
[ 5.471162] EXT3 FS on md0, internal journal
[ 5.560294] loop: module loaded
[ 5.730776] usb 2-1.1: new low speed USB device using ehci_hcd and address 3
[ 5.830470] usb 2-1.1: New USB device found, idVendor=0518, idProduct=0001
[ 5.830474] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.830478] usb 2-1.1: Product: USB-compliant keyboard
[ 5.830481] usb 2-1.1: Manufacturer: Plus More Enterprise LTD.
[ 5.830571] usb 2-1.1: configuration #1 chosen from 1 choice
[ 5.903352] usb 2-1.2: new full speed USB device using ehci_hcd and address 4
[ 5.944535] usbcore: registered new interface driver hiddev
[ 5.947304] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input4
[ 5.947376] generic-usb 0003:0518:0001.0001: input,hidraw0: USB HID v1.10 Keyboard [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.1/input0
[ 5.951065] input: Plus More Enterprise LTD. USB-compliant keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.1/input/input5
[ 5.951135] generic-usb 0003:0518:0001.0002: input,hidraw1: USB HID v1.10 Mouse [Plus More Enterprise LTD. USB-compliant keyboard] on usb-0000:00:1d.0-1.1/input1
[ 5.951150] usbcore: registered new interface driver usbhid
[ 5.951152] usbhid: v2.6:USB HID core driver
[ 5.996056] usb 2-1.2: New USB device found, idVendor=058f, idProduct=9254
[ 5.996061] usb 2-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.996065] usb 2-1.2: Product: Generic USB Hub
[ 5.996068] usb 2-1.2: Manufacturer: ALCOR
[ 5.996146] usb 2-1.2: configuration #1 chosen from 1 choice
[ 5.996325] hub 2-1.2:1.0: USB hub found
[ 5.996427] hub 2-1.2:1.0: 4 ports detected
[ 6.266860] usb 2-1.2.1: new low speed USB device using ehci_hcd and address 5
[ 6.363545] usb 2-1.2.1: New USB device found, idVendor=413c, idProduct=2005
[ 6.363547] usb 2-1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.363549] usb 2-1.2.1: Product: DELL USB Keyboard
[ 6.363551] usb 2-1.2.1: Manufacturer: DELL
[ 6.363611] usb 2-1.2.1: configuration #1 chosen from 1 choice
[ 6.366696] input: DELL DELL USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.1/2-1.2.1:1.0/input/input6
[ 6.366760] generic-usb 0003:413C:2005.0003: input,hidraw2: USB HID v1.10 Keyboard [DELL DELL USB Keyboard] on usb-0000:00:1d.0-1.2.1/input0
[ 6.438443] usb 2-1.2.2: new low speed USB device using ehci_hcd and address 6
[ 6.535999] usb 2-1.2.2: New USB device found, idVendor=413c, idProduct=3200
[ 6.536004] usb 2-1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 6.536008] usb 2-1.2.2: Product: Dell USB Mouse
[ 6.536011] usb 2-1.2.2: Manufacturer: Dell
[ 6.536099] usb 2-1.2.2: configuration #1 chosen from 1 choice
[ 6.539137] input: Dell Dell USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.2/2-1.2.2:1.0/input/input7
[ 6.539198] generic-usb 0003:413C:3200.0004: input,hidraw3: USB HID v1.10 Mouse [Dell Dell USB Mouse] on usb-0000:00:1d.0-1.2.2/input0
[ 6.609144] usb 2-1.2.3: new low speed USB device using ehci_hcd and address 7
[ 6.707833] usb 2-1.2.3: New USB device found, idVendor=10d5, idProduct=55a4
[ 6.707839] usb 2-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6.707842] usb 2-1.2.3: Product: 4 Port KVMSwicther
[ 6.707845] usb 2-1.2.3: Manufacturer: No brand
[ 6.707848] usb 2-1.2.3: SerialNumber: 2ôÒ
[ 6.707934] usb 2-1.2.3: configuration #1 chosen from 1 choice
[ 6.713672] input: No brand 4 Port KVMSwicther as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2.3/2-1.2.3:1.0/input/input8
[ 6.713728] generic-usb 0003:10D5:55A4.0005: input,hidraw4: USB HID v1.10 Keyboard [No brand 4 Port KVMSwicther] on usb-0000:00:1d.0-1.2.3/input0
[ 6.714466] usbhid 2-1.2.3:1.1: couldn't find an input interrupt endpoint
[ 8.093501] kjournald starting. Commit interval 5 seconds
[ 8.093722] EXT3 FS on sdc1, internal journal
[ 8.093729] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.128953] kjournald starting. Commit interval 5 seconds
[ 8.130581] EXT3 FS on dm-0, internal journal
[ 8.130587] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.192020] kjournald starting. Commit interval 5 seconds
[ 8.192338] EXT3 FS on dm-2, internal journal
[ 8.192341] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.222290] kjournald starting. Commit interval 5 seconds
[ 8.222604] EXT3 FS on dm-1, internal journal
[ 8.222613] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.245890] kjournald starting. Commit interval 5 seconds
[ 8.246859] EXT3 FS on dm-3, internal journal
[ 8.246865] EXT3-fs: mounted filesystem with ordered data mode.
[ 8.282849] kjournald starting. Commit interval 5 seconds
[ 8.286291] EXT3 FS on dm-4, internal journal
[ 8.286296] EXT3-fs: mounted filesystem with ordered data mode.
[ 9.236502] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[ 9.292290] e1000e 0000:00:19.0: irq 30 for MSI/MSI-X
[ 9.292716] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.632729] RPC: Registered udp transport module.
[ 10.632731] RPC: Registered tcp transport module.
[ 10.632732] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 10.779381] e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX
[ 10.779384] 0000:00:19.0: eth0: 10/100 speed: disabling TSO
[ 10.781225] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 10.900447] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 11.067136] svc: failed to register lockdv1 RPC service (errno 97).
[ 11.068044] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 11.099686] NFSD: starting 90-second grace period
[ 19.551659] [drm:r100_bandwidth_update] *ERROR* You may not have enough display bandwidth for current mode
[ 19.551661] If you have flickering problem, try to lower resolution, refresh rate, or color depth
[ 21.279372] eth0: no IPv6 routers present
[15973.004275] i2c /dev entries driver
** Model information
sys_vendor: FUJITSU
product_name: PRIMERGY TX100 S2
product_version:
chassis_vendor: FUJITSU
chassis_version: TX100S2F2
bios_vendor: FUJITSU // Phoenix Technologies Ltd.
bios_version: 6.00 Rev. 1.07.2779.A1
board_vendor: FUJITSU
board_name: D2779
board_version: S26361-D2779-A1
** Loaded modules:
Module Size Used by
i2c_dev 4517 0
nfsd 254974 11
lockd 57651 1 nfsd
nfs_acl 2031 1 nfsd
auth_rpcgss 33492 1 nfsd
sunrpc 161701 10 nfsd,lockd,nfs_acl,auth_rpcgss
exportfs 3186 1 nfsd
joydev 8459 0
usbhid 33324 0
hid 63273 1 usbhid
loop 11799 0
radeon 574956 2
snd_pcm 60503 0
snd_timer 15582 1 snd_pcm
snd 46542 2 snd_pcm,snd_timer
soundcore 4598 1 snd
ttm 40210 1 radeon
snd_page_alloc 6265 1 snd_pcm
ehci_hcd 32129 0
drm_kms_helper 20369 1 radeon
parport_pc 18855 0
sg 24085 0
usbcore 122562 3 usbhid,ehci_hcd
drm 142375 4 radeon,ttm,drm_kms_helper
i2c_algo_bit 4225 1 radeon
i2c_i801 7830 0
e1000e 110111 0
i2c_core 15835 6 i2c_dev,radeon,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
pcspkr 1699 0
sr_mod 12602 0
nls_base 6377 1 usbcore
serio_raw 3752 0
parport 27954 1 parport_pc
evdev 7352 14
cdrom 29415 1 sr_mod
container 2389 0
button 4650 0
ext3 106726 7
jbd 37133 1 ext3
mbcache 5050 1 ext3
dm_mod 53754 15
raid1 18431 2
md_mod 73872 3 raid1
sd_mod 29937 10
crc_t10dif 1276 1 sd_mod
ata_generic 3239 0
ata_piix 21140 7
libata 133808 2 ata_generic,ata_piix
scsi_mod 126565 4 sg,sr_mod,sd_mod,libata
thermal 11674 0
thermal_sys 11942 1 thermal
** Network interface configuration:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.20
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
dns-nameservers x.x.x.x
dns-search xxx.xxx.xxx
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 100
link/ether 00:19:99:b1:81:8e brd ff:ff:ff:ff:ff:ff
inet 192.168.1.20/24 brd 192.168.1.255 scope global eth0
inet6 fe80::219:99ff:feb1:818e/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo:131886523 327416 0 0 0 0 0 0 131886523 327416 0 0 0 0 0 0
eth0:4279132393 11089422 0 0 0 0 0 0 14873968882 12276376 0 0 0 0 0 0
*** Protocol statistics:
Ip:
11359825 total packets received
0 forwarded
0 incoming packets discarded
11359825 incoming packets delivered
9092429 requests sent out
Icmp:
63414 ICMP messages received
3047 input ICMP message failed.
ICMP input histogram:
destination unreachable: 12751
timeout in transit: 3
echo requests: 8205
echo replies: 42455
71395 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 12154
echo request: 51036
echo replies: 8205
IcmpMsg:
InType0: 42455
InType3: 12751
InType8: 8205
InType11: 3
OutType0: 8205
OutType3: 12154
OutType8: 51036
Tcp:
59057 active connections openings
53888 passive connection openings
31314 failed connection attempts
10134 connection resets received
13 connections established
11241394 segments received
8302402 segments send out
663274 segments retransmited
0 bad segments received.
44942 resets sent
Udp:
78748 packets received
51 packets to unknown port received.
0 packet receive errors
79140 packets sent
UdpLite:
TcpExt:
32 resets received for embryonic SYN_RECV sockets
2 packets pruned from receive queue because of socket buffer overrun
1 ICMP packets dropped because they were out-of-window
15991 TCP sockets finished time wait in fast timer
12 time wait sockets recycled by time stamp
60 packets rejects in established connections because of timestamp
8536 delayed acks sent
58 delayed acks further delayed because of locked socket
Quick ack mode was activated 966 times
151478 packets directly queued to recvmsg prequeue.
269314 bytes directly in process context from backlog
40345703 bytes directly received in process context from prequeue
1830333 packet headers predicted
91904 packets header predicted and directly queued to user
4089016 acknowledgments not containing data payload received
4164661 predicted acknowledgments
150 times recovered from packet loss due to fast retransmit
369101 times recovered from packet loss by selective acknowledgements
96 bad SACK blocks received
Detected reordering 4 times using FACK
Detected reordering 2 times using SACK
Detected reordering 2 times using reno fast retransmit
Detected reordering 22 times using time stamp
9 congestion windows fully recovered without slow start
173 congestion windows partially recovered using Hoe heuristic
109 congestion windows recovered without slow start by DSACK
445 congestion windows recovered without slow start after partial ack
523736 TCP data loss events
TCPLostRetransmit: 21433
30 timeouts after reno fast retransmit
615 timeouts after SACK recovery
152 timeouts in loss state
651901 fast retransmits
266 forward retransmits
3600 retransmits in slow start
4037 other TCP timeouts
63 classic Reno fast retransmits failed
239 SACK retransmits failed
160 packets collapsed in receive queue due to low socket buffer
976 DSACKs sent for old packets
47 DSACKs sent for out of order packets
1209 DSACKs received
5 DSACKs for out of order packets received
8868 connections reset due to unexpected data
469 connections reset due to early user close
128 connections aborted due to timeout
TCPSACKDiscard: 75
TCPDSACKIgnoredOld: 475
TCPDSACKIgnoredNoUndo: 430
TCPSpuriousRTOs: 15
TCPSackShifted: 580305
TCPSackMerged: 1551237
TCPSackShiftFallback: 543787
IpExt:
InOctets: -43065128
OutOctets: 1767068607
*** Device features:
eth0: 0x9a9
lo: 0x13865
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d130] (rev 11)
Subsystem: Intel Corporation Device [8086:0000]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 3 [8086:d13a] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
Subsystem: Device [0034:0068]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
Subsystem: Device [0034:0068]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
Subsystem: Device [0034:0068]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
Subsystem: Device [0034:0068]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
Subsystem: Device [0034:0068]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:19.0 Ethernet controller [0200]: Intel Corporation 82578DM Gigabit Network Connection [8086:10ef] (rev 05)
Subsystem: Fujitsu Technology Solutions Device [1734:11a6]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 30
Region 0: Memory at c0020000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at c0000000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at 1820 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1167]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at c0001000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1d.0 USB Controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Fujitsu Technology Solutions Device [1734:1167]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at c0002000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=11, subordinate=11, sec-latency=32
I/O behind bridge: 00002000-00002fff
Memory behind bridge: c0100000-c01fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000cfffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 3400 Series Chipset LPC Interface Controller [8086:3b14] (rev 05)
Subsystem: Fujitsu Technology Solutions Device [1734:1167]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller [8086:3b20] (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Fujitsu Technology Solutions Device [1734:1167]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at 18b0 [size=8]
Region 1: I/O ports at 18a4 [size=4]
Region 2: I/O ports at 18a8 [size=8]
Region 3: I/O ports at 18a0 [size=4]
Region 4: I/O ports at 1870 [size=16]
Region 5: I/O ports at 1860 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Fujitsu Technology Solutions Device [1734:1167]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin D routed to IRQ 20
Region 0: Memory at c0003000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller [8086:3b26] (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: Fujitsu Technology Solutions Device [1734:1167]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 23
Region 0: I/O ports at 18c8 [size=8]
Region 1: I/O ports at 18bc [size=4]
Region 2: I/O ports at 18c0 [size=8]
Region 3: I/O ports at 18b8 [size=4]
Region 4: I/O ports at 1890 [size=16]
Region 5: I/O ports at 1880 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
11:07.0 VGA compatible controller [0300]: ATI Technologies Inc ES1000 [1002:515e] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Fujitsu Technology Solutions Device [1734:1122]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+ DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c8000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 2000 [size=256]
Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
ff:00.0 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers [8086:2c50] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:00.1 Host bridge [0600]: Intel Corporation Core Processor QuickPath Architecture System Address Decoder [8086:2c81] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.0 Host bridge [0600]: Intel Corporation Core Processor QPI Link 0 [8086:2c90] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:02.1 Host bridge [0600]: Intel Corporation Core Processor QPI Physical 0 [8086:2c91] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller [8086:2c98] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder [8086:2c99] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9a] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:03.4 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Test Registers [8086:2c9c] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers [8086:2ca0] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers [8086:2ca1] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers [8086:2ca2] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:04.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers [8086:2ca3] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.0 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers [8086:2ca8] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.1 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers [8086:2ca9] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.2 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers [8086:2caa] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
ff:05.3 Host bridge [0600]: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers [8086:2cab] (rev 04)
Subsystem: Fujitsu Technology Solutions Device [1734:1168]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
** USB devices:
Bus 002 Device 007: ID 10d5:55a4 Uni Class Technology Co., Ltd
Bus 002 Device 006: ID 413c:3200 Dell Computer Corp. Mouse
Bus 002 Device 005: ID 413c:2005 Dell Computer Corp. RT7D50 Keyboard
Bus 002 Device 004: ID 058f:9254 Alcor Micro Corp. Hub
Bus 002 Device 003: ID 0518:0001 EzKEY Corp. USB to PS2 Adaptor v1.09
Bus 002 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 6.0.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 2.6.32-5-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-2.6.32-5-amd64 depends on:
ii debconf [debconf-2.0] 1.5.36.1 Debian configuration management sy
ii initramfs-tools [linux 0.98.8 tools for generating an initramfs
ii linux-base 2.6.32-35squeeze2 Linux image base package
ii module-init-tools 3.12-1 tools for managing Linux kernel mo
Versions of packages linux-image-2.6.32-5-amd64 recommends:
pn firmware-linux-free <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 suggests:
pn grub | lilo <none> (no description available)
pn linux-doc-2.6.32 <none> (no description available)
Versions of packages linux-image-2.6.32-5-amd64 is related to:
pn firmware-bnx2 <none> (no description available)
pn firmware-bnx2x <none> (no description available)
pn firmware-ipw2x00 <none> (no description available)
pn firmware-ivtv <none> (no description available)
pn firmware-iwlwifi <none> (no description available)
pn firmware-linux <none> (no description available)
pn firmware-linux-nonfree <none> (no description available)
pn firmware-qlogic <none> (no description available)
pn firmware-ralink <none> (no description available)
pn xen-hypervisor <none> (no description available)
-- debconf information:
linux-image-2.6.32-5-amd64/postinst/depmod-error-initrd-2.6.32-5-amd64: false
linux-image-2.6.32-5-amd64/prerm/removing-running-kernel-2.6.32-5-amd64: true
linux-image-2.6.32-5-amd64/postinst/missing-firmware-2.6.32-5-amd64:
linux-image-2.6.32-5-amd64/postinst/ignoring-do-bootloader-2.6.32-5-amd64:
--- End Message ---