Bug#810821: linux-image-3.16.0-4-amd64: BCM5720 with tg3 module: transmit timed out and then resetting.
Package: src:linux
Version: 3.16.7-ckt11-1+deb8u6
Followup-For: Bug #810821
We also experience link dropouts on tg3 with kernel 3.16 from debian on heavily used internet GW with NAT. No XEN.
This is very common after few hours of run.
Jan 17 06:54:17 c kernel: [141903.348634] tg3 0000:06:00.0 eth0: Link is down
Jan 17 06:54:20 c kernel: [141906.644181] tg3 0000:06:00.0 eth0: Link is up at 1000 Mbps, full duplex
Jan 17 06:54:20 c kernel: [141906.644200] tg3 0000:06:00.0 eth0: Flow control is on for TX and on for RX
First usually the WD timeouts then link dropouts occure every then and now. We have to switch to 3.2 kernel that does not suffer from that bug.
Jan 13 18:40:44 c kernel: [33660.780023] ------------[ cut here ]------------
Jan 13 18:40:44 c kernel: [33660.780040] WARNING: CPU: 3 PID: 0 at /build/linux-x1KGLI/linux-3.16.7-ckt11/net/sched/sch_generic.c:264 dev_watchdog+0x236/0x240()
Jan 13 18:40:44 c kernel: [33660.780043] NETDEV WATCHDOG: eth0 (tg3): transmit queue 0 timed out
Jan 13 18:40:44 c kernel: [33660.780045] Modules linked in: binfmt_misc nf_conntrack_netlink tun nfnetlink nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc 8021q garp stp mrp llc nf_nat_ppt
p nf_nat_proto_gre nf_conntrack_pptp nf_conntrack_proto_gre xt_nat xt_recent iptable_nat nf_nat_ipv4 nf_nat xt_LOG ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 xt_tcpudp xt_multiport xt_conntrack nf_conntrack ip
table_filter iptable_mangle ip_tables x_tables radeon iTCO_wdt joydev ttm evdev iTCO_vendor_support drm_kms_helper drm i2c_algo_bit lpc_ich mfd_core psmouse serio_raw pcspkr i2c_i801 processor i2c_core e752x_ed
ac thermal_sys edac_core rng_core shpchp button dummy loop autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic crct10dif_common hid_generic usbhid hid sg sr_mod cdrom ata_generic ehci_pci uhci_h
cd ata_piix ehci_hcd libata usbcore usb_common mptspi scsi_transport_spi mptscsih tg3 mptbase ptp pps_core libphy scsi_mod
Jan 13 18:40:44 c kernel: [33660.780142] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 3.16.0-4-amd64 #1 Debian 3.16.7-ckt11-1+deb8u6
Jan 13 18:40:44 c kernel: [33660.780145] Hardware name: IBM eserver xSeries 336 -[883715Y]-/, BIOS -[APE121AUS-1.06]- 01/17/2005
Jan 13 18:40:44 c kernel: [33660.780148] 0000000000000009 ffffffff8150b4e5 ffff8800bfb83e28 ffffffff81067767
Jan 13 18:40:44 c kernel: [33660.780153] 0000000000000000 ffff8800bfb83e78 0000000000000005 0000000000000003
Jan 13 18:40:44 c kernel: [33660.780158] ffff8800bb41a000 ffffffff810677cc ffffffff81777fa8 0000000000000030
Jan 13 18:40:44 c kernel: [33660.780164] Call Trace:
Jan 13 18:40:44 c kernel: [33660.780166] <IRQ> [<ffffffff8150b4e5>] ? dump_stack+0x41/0x51
Jan 13 18:40:44 c kernel: [33660.780180] [<ffffffff81067767>] ? warn_slowpath_common+0x77/0x90
Jan 13 18:40:44 c kernel: [33660.780185] [<ffffffff810677cc>] ? warn_slowpath_fmt+0x4c/0x50
Jan 13 18:40:44 c kernel: [33660.780192] [<ffffffff810be2ee>] ? handle_fasteoi_irq+0xee/0x150
Jan 13 18:40:44 c kernel: [33660.780201] [<ffffffff8143ec16>] ? dev_watchdog+0x236/0x240
Jan 13 18:40:44 c kernel: [33660.780205] [<ffffffff8143e9e0>] ? dev_graft_qdisc+0x70/0x70
Jan 13 18:40:44 c kernel: [33660.780211] [<ffffffff81072ab1>] ? call_timer_fn+0x31/0x100
Jan 13 18:40:44 c kernel: [33660.780216] [<ffffffff8143e9e0>] ? dev_graft_qdisc+0x70/0x70
Jan 13 18:40:44 c kernel: [33660.780221] [<ffffffff810740e9>] ? run_timer_softirq+0x209/0x2f0
Jan 13 18:40:44 c kernel: [33660.780226] [<ffffffff8106c611>] ? __do_softirq+0xf1/0x290
Jan 13 18:40:44 c kernel: [33660.780230] [<ffffffff8106c9e5>] ? irq_exit+0x95/0xa0
Jan 13 18:40:44 c kernel: [33660.780235] [<ffffffff815145b5>] ? smp_apic_timer_interrupt+0x45/0x60
Jan 13 18:40:44 c kernel: [33660.780241] [<ffffffff8151263d>] ? apic_timer_interrupt+0x6d/0x80
Jan 13 18:40:44 c kernel: [33660.780243] <EOI> [<ffffffff8101cc42>] ? mwait_idle+0x62/0xa0
Jan 13 18:40:44 c kernel: [33660.780254] [<ffffffff810a7fc0>] ? cpu_startup_entry+0x340/0x400
Jan 13 18:40:44 c kernel: [33660.780259] [<ffffffff81042daf>] ? start_secondary+0x20f/0x2d0
Jan 13 18:40:44 c kernel: [33660.780263] ---[ end trace 6c3fb5d7bc624d1a ]---
Jan 13 18:40:44 c kernel: [33663.204179] tg3 0000:06:00.0 eth0: Link is down
Jan 13 18:40:47 c kernel: [33666.604558] tg3 0000:06:00.0 eth0: Link is up at 1000 Mbps, full duplex
Jan 13 18:40:47 c kernel: [33666.604565] tg3 0000:06:00.0 eth0: Flow control is on for TX and on for RX
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
sys_vendor: IBM
product_name: eserver xSeries 336 -[883715Y]-
product_version:
chassis_vendor: IBM
chassis_version:
bios_vendor: IBM
bios_version: -[APE121AUS-1.06]-
board_vendor: IBM
board_name:
board_version:
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation E7520 Memory Controller Hub [8086:3590] (rev 0c)
Subsystem: IBM Device [1014:02dc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 1: Memory at ff000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: e752x_edac
00:00.1 Unassigned class [ff00]: Intel Corporation E7525/E7520 Error Reporting Registers [8086:3591] (rev 0c)
Subsystem: IBM Device [1014:02dc]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:02.0 PCI bridge [0604]: Intel Corporation E7525/E7520/E7320 PCI Express Port A [8086:3595] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:04.0 PCI bridge [0604]: Intel Corporation E7525/E7520 PCI Express Port B [8086:3597] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: ce000000-cfffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C [8086:3599] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
Memory behind bridge: cc000000-cdffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:07.0 PCI bridge [0604]: Intel Corporation E7520 PCI Express Port C1 [8086:359a] (rev 0c) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00005000-0000ffff
Memory behind bridge: ca000000-cbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation E7525/E7520/E7320 Extended Configuration Registers [8086:359b] (rev 0c)
Subsystem: IBM Device [1014:02dc]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: IBM Device [1014:02dc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 2200 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: IBM Device [1014:02dc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 2600 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: IBM Device [1014:02dc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
I/O behind bridge: 00003000-00003fff
Memory behind bridge: de000000-dfffffff
Prefetchable memory behind bridge: d0000000-ddffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: IBM Device [1014:02dc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 0
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 0480 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: IBM Device [1014:02dc]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 0440 [size=32]
Kernel driver in use: i801_smbus
01:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV100 [Radeon 7000 / Radeon VE] [1002:5159] (prog-if 00 [VGA controller])
Subsystem: IBM eServer xSeries server mainboard [1014:02c8]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (2000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 3000 [size=256]
Region 2: Memory at dfff0000 (32-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at d8000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
03:00.0 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A [8086:0329] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=04, subordinate=04, sec-latency=64
I/O behind bridge: 00004000-00004fff
Memory behind bridge: ce000000-cfffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c00fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
03:00.2 PCI bridge [0604]: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B [8086:032a] (rev 09) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=03, secondary=05, subordinate=05, sec-latency=64
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
04:01.0 SCSI storage controller [0100]: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI [1000:0030] (rev 08)
Subsystem: IBM Device [1014:026d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 72 (4250ns min, 4500ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 4000 [size=256]
Region 1: Memory at cfff0000 (64-bit, non-prefetchable) [size=64K]
Region 3: Memory at cffe0000 (64-bit, non-prefetchable) [size=64K]
[virtual] Expansion ROM at c0000000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: mptspi
06:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659] (rev 11)
Subsystem: IBM eServer xSeries server mainboard [1014:02c6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at cdff0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
07:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express [14e4:1659] (rev 11)
Subsystem: IBM eServer xSeries server mainboard [1014:02c6]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at cbff0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 0557:2263 ATEN International Co., Ltd
Bus 002 Device 002: ID 0557:8021 ATEN International Co., Ltd
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.2
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
Reply to: