Bug#805775: linux-image-4.2.0-1-686-pae: irq 23: nobody cared - USB ohci devices hang afterwards
Package: src:linux
Version: 4.2.6-1
Severity: normal
Dear Maintainer,
Device: Asus EEEpc 1201N
Recently upgraded the system to the latest packages, which included the kernel image 4.2.0-1-686.
Before I was running inux-image-4.1.0-2-686-pae 4.1.6-1.
After upgrading, after a time, the USB mouse plugged into this laptop starting misbehaving (very choppy mouse tracking). Digging through some logs led me to the following report:
[32280.408524] irq 23: nobody cared (try booting with the "irqpoll" option)
[32280.408546] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 4.2.0-1-686-pae #1 Debian 4.2.6-1
[32280.408553] Hardware name: ASUSTeK Computer INC. 1201N/1201N, BIOS 0326 04/29/2010
[32280.408560] f755d2e4 f742df70 c14f41df f755d280 c10af92c c15d92b0 00000017 c1619935
[32280.408580] c1376e86 f755d280 00000000 f742df94 c10afcae f742df94 c1376e86 0079fedf
[32280.408598] f755d2e4 f755d280 f755d2e4 00000000 f742dfd0 c10ad732 f742dfb8 c10ae67d
[32280.408615] Call Trace:
[32280.408635] [<c14f41df>] ? dump_stack+0x3e/0x4e
[32280.408647] [<c10af92c>] ? __report_bad_irq+0x2c/0xd0
[32280.408659] [<c1376e86>] ? add_interrupt_randomness+0x156/0x190
[32280.408668] [<c10afcae>] ? note_interrupt+0x20e/0x250
[32280.408677] [<c1376e86>] ? add_interrupt_randomness+0x156/0x190
[32280.408687] [<c10ad732>] ? handle_irq_event_percpu+0x122/0x190
[32280.408695] [<c10ae67d>] ? irq_do_set_affinity+0x5d/0x70
[32280.408705] [<c10ad7d4>] ? handle_irq_event+0x34/0x50
[32280.408714] [<c10b00a5>] ? handle_fasteoi_irq+0x75/0x120
[32280.408722] [<c10b0030>] ? handle_simple_irq+0x70/0x70
[32280.408733] [<c1012897>] ? handle_irq+0x67/0x80
[32280.408738] <IRQ> [<c14fa22c>] ? do_IRQ+0x3c/0xd0
[32280.408756] [<c14f96b3>] ? common_interrupt+0x33/0x38
[32280.408769] [<c13dc615>] ? cpuidle_enter_state+0xe5/0x2a0
[32280.408781] [<c1098fea>] ? cpu_startup_entry+0x23a/0x2f0
[32280.408791] [<c171aaee>] ? start_kernel+0x3b2/0x3b8
[32280.408796] handlers:
[32280.408817] [<f83191b0>] usb_hcd_irq [usbcore]
[32280.408823] Disabling IRQ #23
(The taint comes from the Nvidia drivers for the ION chip)
Removing ohci_pci and ohci_hcd, and reloading them, returns the system to working state.
Removing the device in question did not resolve any issues.
on int23 only ohci_hcd is mapped:
23: 10060774 0 0 0 IO-APIC 23-fasteoi ohci_hcd:usb3
The mouse device in question is a logitech M325 (with Universal receiver)
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
-- Package-specific info:
** Version:
Linux version 4.2.0-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-5) ) #1 SMP Debian 4.2.6-1 (2015-11-10)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-686-pae root=UUID=9292a7ff-e349-4f84-867f-086ff2aa1d7e ro
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
[31514.581408] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[31514.581418] cfg80211: (5490000 KHz - 5710000 KHz @ 160000 KHz), (N/A, 2700 mBm), (0 s)
[31514.581428] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A)
[32280.408524] irq 23: nobody cared (try booting with the "irqpoll" option)
[32280.408546] CPU: 0 PID: 0 Comm: swapper/0 Tainted: P O 4.2.0-1-686-pae #1 Debian 4.2.6-1
[32280.408553] Hardware name: ASUSTeK Computer INC. 1201N/1201N, BIOS 0326 04/29/2010
[32280.408560] f755d2e4 f742df70 c14f41df f755d280 c10af92c c15d92b0 00000017 c1619935
[32280.408580] c1376e86 f755d280 00000000 f742df94 c10afcae f742df94 c1376e86 0079fedf
[32280.408598] f755d2e4 f755d280 f755d2e4 00000000 f742dfd0 c10ad732 f742dfb8 c10ae67d
[32280.408615] Call Trace:
[32280.408635] [<c14f41df>] ? dump_stack+0x3e/0x4e
[32280.408647] [<c10af92c>] ? __report_bad_irq+0x2c/0xd0
[32280.408659] [<c1376e86>] ? add_interrupt_randomness+0x156/0x190
[32280.408668] [<c10afcae>] ? note_interrupt+0x20e/0x250
[32280.408677] [<c1376e86>] ? add_interrupt_randomness+0x156/0x190
[32280.408687] [<c10ad732>] ? handle_irq_event_percpu+0x122/0x190
[32280.408695] [<c10ae67d>] ? irq_do_set_affinity+0x5d/0x70
[32280.408705] [<c10ad7d4>] ? handle_irq_event+0x34/0x50
[32280.408714] [<c10b00a5>] ? handle_fasteoi_irq+0x75/0x120
[32280.408722] [<c10b0030>] ? handle_simple_irq+0x70/0x70
[32280.408733] [<c1012897>] ? handle_irq+0x67/0x80
[32280.408738] <IRQ> [<c14fa22c>] ? do_IRQ+0x3c/0xd0
[32280.408756] [<c14f96b3>] ? common_interrupt+0x33/0x38
[32280.408769] [<c13dc615>] ? cpuidle_enter_state+0xe5/0x2a0
[32280.408781] [<c1098fea>] ? cpu_startup_entry+0x23a/0x2f0
[32280.408791] [<c171aaee>] ? start_kernel+0x3b2/0x3b8
[32280.408796] handlers:
[32280.408817] [<f83191b0>] usb_hcd_irq [usbcore]
[32280.408823] Disabling IRQ #23
[32463.312286] usb 3-2: USB disconnect, device number 2
[32474.316092] usb 3-2: new full-speed USB device number 3 using ohci-pci
[32476.112195] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
[32476.112207] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[32476.112217] usb 3-2: Product: USB Receiver
[32476.112223] usb 3-2: Manufacturer: Logitech
[32477.914448] logitech-djreceiver 0003:046D:C52B.0007: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-2/input2
[32479.812486] input: Logitech M325 as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0007/0003:046D:400A.0008/input/input15
[32479.813518] logitech-hidpp-device 0003:046D:400A.0008: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:04.0-2:1
[32505.949330] usbcore: deregistering interface driver usbhid
[32510.112801] logitech-djreceiver 0003:046D:C52B.000B: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-2/input2
[32510.468285] usbcore: registered new interface driver usbhid
[32510.468297] usbhid: USB HID core driver
[32512.812483] input: Logitech M325 as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.2/0003:046D:C52B.000B/0003:046D:400A.000C/input/input16
[32512.813526] logitech-hidpp-device 0003:046D:400A.000C: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:04.0-2:1
[32524.586297] usbcore: deregistering interface driver usbhid
[32551.612205] usb 3-2: USB disconnect, device number 3
[32557.212083] usb 3-2: new full-speed USB device number 4 using ohci-pci
[32559.012123] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
[32559.012136] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[32559.012143] usb 3-2: Product: USB Receiver
[32559.012149] usb 3-2: Manufacturer: Logitech
[32560.312485] usbcore: registered new interface driver usbhid
[32560.312498] usbhid: USB HID core driver
[32560.712656] logitech-djreceiver 0003:046D:C52B.000F: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-2/input2
[32561.812455] input: Logitech M325 as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.2/0003:046D:C52B.000F/0003:046D:400A.0010/input/input17
[32561.813336] logitech-hidpp-device 0003:046D:400A.0010: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:04.0-2:1
[32702.352243] ohci-pci 0000:00:06.0: remove, state 1
[32702.352269] usb usb4: USB disconnect, device number 1
[32702.352277] usb 4-3: USB disconnect, device number 2
[32702.353953] ohci-pci 0000:00:06.0: USB bus 4 deregistered
[32702.354246] ohci-pci 0000:00:04.0: remove, state 1
[32702.354266] usb usb3: USB disconnect, device number 1
[32702.354274] usb 3-2: USB disconnect, device number 4
[32702.460990] ohci-pci 0000:00:04.0: USB bus 3 deregistered
[32707.286422] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[32710.651288] ohci-pci: OHCI PCI platform driver
[32710.651634] ohci-pci 0000:00:04.0: OHCI PCI host controller
[32710.651659] ohci-pci 0000:00:04.0: new USB bus registered, assigned bus number 3
[32710.651743] ohci-pci 0000:00:04.0: irq 23, io mem 0xf9f7f000
[32710.706211] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[32710.706223] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[32710.706233] usb usb3: Product: OHCI PCI host controller
[32710.706239] usb usb3: Manufacturer: Linux 4.2.0-1-686-pae ohci_hcd
[32710.706248] usb usb3: SerialNumber: 0000:00:04.0
[32710.706963] hub 3-0:1.0: USB hub found
[32710.706993] hub 3-0:1.0: 3 ports detected
[32710.707989] ohci-pci 0000:00:06.0: OHCI PCI host controller
[32710.708134] ohci-pci 0000:00:06.0: new USB bus registered, assigned bus number 4
[32710.708253] ohci-pci 0000:00:06.0: irq 21, io mem 0xf9f7d000
[32710.766377] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[32710.766389] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[32710.766396] usb usb4: Product: OHCI PCI host controller
[32710.766402] usb usb4: Manufacturer: Linux 4.2.0-1-686-pae ohci_hcd
[32710.766408] usb usb4: SerialNumber: 0000:00:06.0
[32710.767153] hub 4-0:1.0: USB hub found
[32710.767201] hub 4-0:1.0: 6 ports detected
[32711.080127] usb 3-2: new full-speed USB device number 2 using ohci-pci
[32711.144091] usb 4-3: new full-speed USB device number 2 using ohci-pci
[32711.302144] usb 3-2: New USB device found, idVendor=046d, idProduct=c52b
[32711.302161] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[32711.302173] usb 3-2: Product: USB Receiver
[32711.302182] usb 3-2: Manufacturer: Logitech
[32711.345124] logitech-djreceiver 0003:046D:C52B.0013: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:04.0-2/input2
[32711.369152] usb 4-3: New USB device found, idVendor=0b05, idProduct=1788
[32711.369165] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[32711.369175] usb 4-3: Product: BT-270
[32711.369181] usb 4-3: Manufacturer: Broadcom Corp
[32711.369186] usb 4-3: SerialNumber: 1C4BD6048A43
[32713.014627] input: Logitech M325 as /devices/pci0000:00/0000:00:04.0/usb3/3-2/3-2:1.2/0003:046D:C52B.0013/0003:046D:400A.0014/input/input18
[32713.015530] logitech-hidpp-device 0003:046D:400A.0014: input,hidraw1: USB HID v1.11 Mouse [Logitech M325] on usb-0000:00:04.0-2:1
** Model information
not available
** Loaded modules:
ohci_pci
ohci_hcd
hid_logitech_hidpp
hid_logitech_dj
usbhid
jitterentropy_rng
sha256_generic
hmac
drbg
ansi_cprng
ctr
ccm
snd_hda_codec_hdmi
joydev
snd_hda_codec_realtek
snd_hda_codec_generic
eeepc_wmi
asus_wmi
arc4
rtl8192se
rtl_pci
rtlwifi
mac80211
uvcvideo
videobuf2_vmalloc
cfg80211
videobuf2_memops
coretemp
videobuf2_core
evdev
psmouse
v4l2_common
videodev
serio_raw
media
snd_hda_intel
snd_hda_codec
snd_hda_core
snd_hwdep
snd_pcm_oss
snd_mixer_oss
sg
snd_pcm
snd_timer
shpchp
snd
soundcore
i2c_nforce2
sparse_keymap
rfkill
8250_fintek
wmi
battery
ac
video
button
acpi_cpufreq
processor
nvidia(PO)
drm
parport_pc
ppdev
lp
parport
autofs4
xfs
crc32c_generic
libcrc32c
sd_mod
hid
atl1c
ahci
libahci
libata
ehci_pci
ehci_hcd
scsi_mod
usbcore
usb_common
thermal
thermal_sys
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 48:5b:39:80:ee:43 brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 1c:4b:d6:60:69:ed brd ff:ff:ff:ff:ff:ff
inet 192.168.34.11/24 brd 192.168.34.255 scope global dynamic wlan0
valid_lft 3234sec preferred_lft 3234sec
inet6 fde3:72dc:65df::880/128 scope global dynamic
valid_lft 84622sec preferred_lft 84622sec
inet6 fde3:72dc:65df:0:1e4b:d6ff:fe60:69ed/64 scope global noprefixroute dynamic
valid_lft 7082sec preferred_lft 1682sec
inet6 fe80::1e4b:d6ff:fe60:69ed/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
wlan0: 139207287 384039 0 0 0 0 0 0 53393456 355370 0 0 0 0 0 0
lo: 75305420 252762 0 0 0 0 0 0 75305420 252762 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
595499 total packets received
159 with invalid addresses
0 forwarded
0 incoming packets discarded
593445 incoming packets delivered
570805 requests sent out
52 outgoing packets dropped
6653 dropped because of missing route
Icmp:
348 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 348
362 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 362
IcmpMsg:
InType3: 348
OutType3: 362
Tcp:
3220 active connections openings
5031 passive connection openings
7 failed connection attempts
384 connection resets received
16 connections established
456687 segments received
439083 segments send out
1378 segments retransmited
4 bad segments received.
1664 resets sent
Udp:
164268 packets received
362 packets to unknown port received.
0 packet receive errors
161150 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 4776
UdpLite:
TcpExt:
1 resets received for embryonic SYN_RECV sockets
3906 TCP sockets finished time wait in fast timer
36031 delayed acks sent
16 delayed acks further delayed because of locked socket
Quick ack mode was activated 1048 times
364 packets directly queued to recvmsg prequeue.
28638 bytes directly in process context from backlog
TCPDirectCopyFromPrequeue: 137378
173788 packet headers predicted
192 packets header predicted and directly queued to user
51463 acknowledgments not containing data payload received
168292 predicted acknowledgments
TCPSackRecovery: 69
TCPDSACKUndo: 1
151 congestion windows recovered without slow start after partial ack
69 fast retransmits
25 retransmits in slow start
TCPTimeouts: 261
TCPLossProbes: 687
TCPLossProbeRecovery: 20
TCPDSACKOldSent: 1052
TCPDSACKOfoSent: 11
TCPDSACKRecv: 499
84 connections reset due to unexpected data
267 connections reset due to early user close
55 connections aborted due to timeout
5 times unable to send RST due to no memory
TCPDSACKIgnoredNoUndo: 272
TCPSackShiftFallback: 79
TCPRcvCoalesce: 36156
TCPOFOQueue: 821
TCPOFOMerge: 11
TCPChallengeACK: 4
TCPSYNChallenge: 4
TCPSpuriousRtxHostQueues: 12
TCPAutoCorking: 3461
TCPSynRetrans: 60
TCPOrigDataSent: 234202
TCPHystartTrainDetect: 1
TCPHystartTrainCwnd: 16
TCPHystartDelayDetect: 2
TCPHystartDelayCwnd: 69
TCPACKSkippedSynRecv: 1
TCPACKSkippedSeq: 1
TCPKeepAlive: 5509
IpExt:
InMcastPkts: 2398
OutMcastPkts: 1492
InBcastPkts: 8110
OutBcastPkts: 1856
InOctets: 201827604
OutOctets: 108822472
InMcastOctets: 383980
OutMcastOctets: 224136
InBcastOctets: 1413093
OutBcastOctets: 771736
InNoECTPkts: 595447
InECT0Pkts: 52
** PCI devices:
00:00.0 Host bridge [0600]: NVIDIA Corporation MCP79 Host Bridge [10de:0a82] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:00.1 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a88] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:03.0 ISA bridge [0601]: NVIDIA Corporation MCP79 LPC Bridge [10de:0aae] (rev b3)
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: I/O ports at 4f00 [size=256]
00:03.1 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0aa4] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.2 SMBus [0c05]: NVIDIA Corporation MCP79 SMBus [10de:0aa2] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 4900 [size=64]
Region 4: I/O ports at 4d00 [size=64]
Region 5: I/O ports at 4e00 [size=64]
Capabilities: <access denied>
Kernel driver in use: nForce2_smbus
00:03.3 RAM memory [0500]: NVIDIA Corporation MCP79 Memory Controller [10de:0a89] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:03.5 Co-processor [0b40]: NVIDIA Corporation MCP79 Co-processor [10de:0aa3] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin B routed to IRQ 20
Region 0: Memory at f9f80000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: nvidia
00:04.0 USB controller [0c03]: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa5] (rev b1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f9f7f000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
00:04.1 USB controller [0c03]: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa6] (rev b1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 22
Region 0: Memory at f9f7ec00 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:06.0 USB controller [0c03]: NVIDIA Corporation MCP79 OHCI USB 1.1 Controller [10de:0aa7] (rev b1) (prog-if 10 [OHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 21
Region 0: Memory at f9f7d000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
00:06.1 USB controller [0c03]: NVIDIA Corporation MCP79 EHCI USB 2.0 Controller [10de:0aa9] (rev b1) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 20
Region 0: Memory at f9f7e800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:08.0 Audio device [0403]: NVIDIA Corporation MCP79 High Definition Audio [10de:0ac0] (rev b1)
Subsystem: ASUSTeK Computer Inc. Device [1043:83ce]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (500ns min, 1250ns max)
Interrupt: pin A routed to IRQ 22
Region 0: Memory at f9f78000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:09.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Bridge [10de:0aab] (rev b1) (prog-if 01 [Subtractive decode])
Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:0b.0 SATA controller [0106]: NVIDIA Corporation MCP79 AHCI Controller [10de:0ab9] (rev b1) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (750ns min, 250ns max)
Interrupt: pin A routed to IRQ 24
Region 0: I/O ports at b080 [size=8]
Region 1: I/O ports at b000 [size=4]
Region 2: I/O ports at ac00 [size=8]
Region 3: I/O ports at a880 [size=4]
Region 4: I/O ports at a800 [size=16]
Region 5: Memory at f9f76000 (32-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:10.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0aa0] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fa000000-fbdfffff
Prefetchable memory behind bridge: 00000000e0000000-00000000f7ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:16.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac7] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fbe00000-fbefffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:18.0 PCI bridge [0604]: NVIDIA Corporation MCP79 PCI Express Bridge [10de:0ac7] (rev b1) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fbf00000-fbffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
05:00.0 VGA compatible controller [0300]: NVIDIA Corporation ION VGA [GeForce 9400M] [10de:0876] (rev b1) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8402]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 25
Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at f6000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at cc00 [size=128]
[virtual] Expansion ROM at fbde0000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: nvidia
07:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8191SEvA Wireless LAN Controller [10ec:8171] (rev 10)
Subsystem: AzureWave Device [1a3b:1107]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at d800 [size=256]
Region 1: Memory at fbefc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8192se
09:00.0 Ethernet controller [0200]: Qualcomm Atheros AR8132 Fast Ethernet [1969:1062] (rev c0)
Subsystem: ASUSTeK Computer Inc. Device [1043:14e5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at ec00 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
** USB devices:
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 002: ID 0b05:1788 ASUSTek Computer, Inc. BT-270 Bluetooth Adapter
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 13d3:5111 IMC Networks Integrated Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (900, 'testing'), (500, 'stable')
Architecture: i386 (i686)
Kernel: Linux 4.2.0-1-686-pae (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.2.0-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.58
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 21-1
ii linux-base 4.0
Versions of packages linux-image-4.2.0-1-686-pae recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.0.9-1
ii libc6-i686 2.19-22
Versions of packages linux-image-4.2.0-1-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-31
pn linux-doc-4.2 <none>
Versions of packages linux-image-4.2.0-1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 20151018-2
ii firmware-linux-nonfree 20151018-2
ii firmware-misc-nonfree [firmware-ralink] 20151018-2
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-realtek 20151018-2
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.2.0-1-686-pae/postinst/depmod-error-initrd-4.2.0-1-686-pae: false
linux-image-4.2.0-1-686-pae/postinst/mips-initrd-4.2.0-1-686-pae:
linux-image-4.2.0-1-686-pae/prerm/removing-running-kernel-4.2.0-1-686-pae: true
Reply to: