Package: src:linux Version: 4.2.5-1 Severity: important Dear Maintainer, I have installed debian-testing on an intel-baytrail-system (hp pavilion x2 10, model 2015) using the multiarch image (64 bit OS, 32 bit UEFI). Installation was fine, however when booting the system, the system seems to freeze when changing from simplefb to inteldrmfb. After waiting for ar least 10 minutes, I can access the system again, everything works fine. There are two corresponding traces in the system log after 10 minutes. This behaviour can be reproduced on every boot (see attachment). As a tempory solution, I am using the "nomodeset" parameter, resulting in a weak and limited X-Server, but no 10 minutes delay. I have also compiled a 4.3.0 kernel - leading to exactly the same behaviour. Finally, I installed 32 bit OS - with no difference. I would expect no black screen for 10 minutes. -- Package-specific info: ** Version: Linux version 4.2.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-5) ) #1 SMP Debian 4.2.5-1 (2015-10-27) ** Command line: BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-amd64 root=UUID=72f06240-3159-485b-8342-18ffaa1946e9 ro ** Tainted: W (512) * Taint on warning. ** Kernel log: [ 6.802008] RPC: Registered named UNIX socket transport module. [ 6.804182] RPC: Registered udp transport module. [ 6.807017] RPC: Registered tcp transport module. [ 6.809832] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 6.820753] FS-Cache: Loaded [ 6.840129] FS-Cache: Netfs 'nfs' registered for caching [ 6.865166] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ 7.556784] IPv6: ADDRCONF(NETDEV_UP): wlx801f02e283f9: link is not ready [ 7.558326] random: nonblocking pool is initialized [ 7.558417] rtl8192cu: MAC auto ON okay! [ 7.570242] rtl8192cu: Tx queue select: 0x05 [ 7.953511] IPv6: ADDRCONF(NETDEV_UP): wlx801f02e283f9: link is not ready [ 8.142221] IPv6: ADDRCONF(NETDEV_UP): wlx801f02e283f9: link is not ready [ 9.049613] wlx801f02e283f9: authenticate with c8:0e:14:e1:c8:ac [ 9.060674] wlx801f02e283f9: send auth to c8:0e:14:e1:c8:ac (try 1/3) [ 9.063738] wlx801f02e283f9: authenticated [ 9.066917] wlx801f02e283f9: associate with c8:0e:14:e1:c8:ac (try 1/3) [ 9.114059] wlx801f02e283f9: RX AssocResp from c8:0e:14:e1:c8:ac (capab=0x431 status=0 aid=1) [ 9.116117] wlx801f02e283f9: associated [ 9.116145] IPv6: ADDRCONF(NETDEV_CHANGE): wlx801f02e283f9: link becomes ready [ 9.127347] cfg80211: Regulatory domain changed to country: DE [ 9.127356] cfg80211: DFS Master region: ETSI [ 9.127360] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 9.127366] cfg80211: (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 9.127372] cfg80211: (5150000 KHz - 5250000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 9.127378] cfg80211: (5250000 KHz - 5350000 KHz @ 80000 KHz, 200000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 9.127383] cfg80211: (5470000 KHz - 5725000 KHz @ 160000 KHz), (N/A, 2698 mBm), (0 s) [ 9.127388] cfg80211: (57000000 KHz - 66000000 KHz @ 2160000 KHz), (N/A, 4000 mBm), (N/A) [ 312.844163] wlx801f02e283f9: AP c8:0e:14:e1:c8:ac changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [ 752.186092] ------------[ cut here ]------------ [ 752.186176] WARNING: CPU: 0 PID: 721 at /build/linux-jyEg5w/linux-4.2.5/drivers/gpu/drm/drm_irq.c:1171 drm_wait_one_vblank+0x150/0x190 [drm]() [ 752.186187] vblank wait timed out on crtc 0 [ 752.186195] Modules linked in: ctr ccm nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc nls_utf8 nls_cp437 vfat fat arc4 rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211 intel_powerclamp intel_rapl coretemp kvm crct10dif_pclmul crc32_pclmul jitterentropy_rng drbg ansi_cprng snd_soc_sst_byt_rt5640_mach iTCO_wdt iTCO_vendor_support hp_wmi sparse_keymap rfkill hid_multitouch aesni_intel aes_x86_64 efi_pstore lrw gf128mul snd_soc_rt5640 glue_helper snd_soc_rl6231 ablk_helper cryptd snd_soc_core snd_compress efivars snd_pcm pcspkr snd_timer snd soundcore regmap_i2c battery joydev evdev i915 drm_kms_helper lpc_ich mfd_core drm i2c_algo_bit wmi button 8250_fintek video tpm_crb tpm processor_thermal_device dw_dmac intel_soc_dts_iosf int3402_thermal int3403_thermal dw_dmac_core [ 752.186476] int3400_thermal int340x_thermal_zone iosf_mbi acpi_thermal_rel snd_soc_sst_acpi ac i2c_designware_platform i2c_designware_core acpi_pad processor ecryptfs cbc sha256_ssse3 sha256_generic hmac encrypted_keys parport_pc ppdev lp parport efivarfs autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid mmc_block xhci_pci xhci_hcd crc32c_intel usbcore thermal usb_common thermal_sys i2c_hid sdhci_acpi hid sdhci mmc_core [ 752.186629] CPU: 0 PID: 721 Comm: Xorg Not tainted 4.2.0-1-amd64 #1 Debian 4.2.5-1 [ 752.186640] Hardware name: Hewlett-Packard HP Pavilion x2 Detachable/815D, BIOS F.11 08/20/2015 [ 752.186651] 0000000000000000 ffffffffa033dc80 ffffffff8154e196 ffff880076847bb8 [ 752.186672] ffffffff8106e5b1 0000000000000000 ffff88007652f000 0000000000000000 [ 752.186690] 000000000000003f 0000000000000000 ffffffff8106e62a ffffffffa033e0f0 [ 752.186709] Call Trace: [ 752.186735] [<ffffffff8154e196>] ? dump_stack+0x40/0x50 [ 752.186756] [<ffffffff8106e5b1>] ? warn_slowpath_common+0x81/0xb0 [ 752.186774] [<ffffffff8106e62a>] ? warn_slowpath_fmt+0x4a/0x50 [ 752.186793] [<ffffffff810a995f>] ? finish_wait+0x3f/0x70 [ 752.186849] [<ffffffffa03103f0>] ? drm_wait_one_vblank+0x150/0x190 [drm] [ 752.186868] [<ffffffff810a9ac0>] ? wait_woken+0x80/0x80 [ 752.186986] [<ffffffffa0424917>] ? i9xx_crtc_disable+0x47/0x3e0 [i915] [ 752.187098] [<ffffffffa042ba9d>] ? intel_crtc_control+0x4d/0xf0 [i915] [ 752.187177] [<ffffffffa042bb9e>] ? intel_crtc_update_dpms+0x5e/0x80 [i915] [ 752.187244] [<ffffffffa0430df0>] ? intel_connector_dpms+0x50/0x60 [i915] [ 752.187287] [<ffffffffa031d4bd>] ? drm_mode_obj_set_property_ioctl+0x23d/0x250 [drm] [ 752.187330] [<ffffffffa031d501>] ? drm_mode_connector_property_set_ioctl+0x31/0x40 [drm] [ 752.187361] [<ffffffffa030e0b2>] ? drm_ioctl+0x172/0x550 [drm] [ 752.187374] [<ffffffff8132d408>] ? backlight_generate_event+0x58/0x70 [ 752.187387] [<ffffffff811cf213>] ? do_vfs_ioctl+0x2c3/0x4a0 [ 752.187398] [<ffffffff811beacd>] ? __sb_end_write+0x2d/0x60 [ 752.187408] [<ffffffff811bca00>] ? vfs_write+0x170/0x190 [ 752.187418] [<ffffffff811cf466>] ? SyS_ioctl+0x76/0x90 [ 752.187427] [<ffffffff811d1287>] ? SyS_poll+0x57/0xf0 [ 752.187439] [<ffffffff815538b2>] ? system_call_fast_compare_end+0xc/0x6b [ 752.187447] ---[ end trace fc58124cfd25ff8e ]--- [ 752.294340] [drm:dpi_send_cmd.constprop.8 [i915]] *ERROR* Video mode command 0x00000041 send failed. [ 752.418257] ------------[ cut here ]------------ [ 752.418399] WARNING: CPU: 1 PID: 721 at /build/linux-jyEg5w/linux-4.2.5/drivers/gpu/drm/i915/intel_display.c:1064 i9xx_crtc_disable+0x8d/0x3e0 [i915]() [ 752.418410] pipe_off wait timed out [ 752.418417] Modules linked in: ctr ccm nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc nls_utf8 nls_cp437 vfat fat arc4 rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211 intel_powerclamp intel_rapl coretemp kvm crct10dif_pclmul crc32_pclmul jitterentropy_rng drbg ansi_cprng snd_soc_sst_byt_rt5640_mach iTCO_wdt iTCO_vendor_support hp_wmi sparse_keymap rfkill hid_multitouch aesni_intel aes_x86_64 efi_pstore lrw gf128mul snd_soc_rt5640 glue_helper snd_soc_rl6231 ablk_helper cryptd snd_soc_core snd_compress efivars snd_pcm pcspkr snd_timer snd soundcore regmap_i2c battery joydev evdev i915 drm_kms_helper lpc_ich mfd_core drm i2c_algo_bit wmi button 8250_fintek video tpm_crb tpm processor_thermal_device dw_dmac intel_soc_dts_iosf int3402_thermal int3403_thermal dw_dmac_core [ 752.418698] int3400_thermal int340x_thermal_zone iosf_mbi acpi_thermal_rel snd_soc_sst_acpi ac i2c_designware_platform i2c_designware_core acpi_pad processor ecryptfs cbc sha256_ssse3 sha256_generic hmac encrypted_keys parport_pc ppdev lp parport efivarfs autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid mmc_block xhci_pci xhci_hcd crc32c_intel usbcore thermal usb_common thermal_sys i2c_hid sdhci_acpi hid sdhci mmc_core [ 752.418853] CPU: 1 PID: 721 Comm: Xorg Tainted: G W 4.2.0-1-amd64 #1 Debian 4.2.5-1 [ 752.418864] Hardware name: Hewlett-Packard HP Pavilion x2 Detachable/815D, BIOS F.11 08/20/2015 [ 752.418874] 0000000000000000 ffffffffa0489220 ffffffff8154e196 ffff880076847c28 [ 752.418896] ffffffff8106e5b1 ffff880076668000 ffff88007652f348 0000000000000000 [ 752.418915] ffff88007c1c0000 ffff88007652f000 ffffffff8106e62a ffffffffa0497c90 [ 752.418934] Call Trace: [ 752.418959] [<ffffffff8154e196>] ? dump_stack+0x40/0x50 [ 752.418979] [<ffffffff8106e5b1>] ? warn_slowpath_common+0x81/0xb0 [ 752.418997] [<ffffffff8106e62a>] ? warn_slowpath_fmt+0x4a/0x50 [ 752.419110] [<ffffffffa042495d>] ? i9xx_crtc_disable+0x8d/0x3e0 [i915] [ 752.419223] [<ffffffffa042ba9d>] ? intel_crtc_control+0x4d/0xf0 [i915] [ 752.419334] [<ffffffffa042bb9e>] ? intel_crtc_update_dpms+0x5e/0x80 [i915] [ 752.419425] [<ffffffffa0430df0>] ? intel_connector_dpms+0x50/0x60 [i915] [ 752.419471] [<ffffffffa031d4bd>] ? drm_mode_obj_set_property_ioctl+0x23d/0x250 [drm] [ 752.419514] [<ffffffffa031d501>] ? drm_mode_connector_property_set_ioctl+0x31/0x40 [drm] [ 752.419545] [<ffffffffa030e0b2>] ? drm_ioctl+0x172/0x550 [drm] [ 752.419557] [<ffffffff8132d408>] ? backlight_generate_event+0x58/0x70 [ 752.419571] [<ffffffff811cf213>] ? do_vfs_ioctl+0x2c3/0x4a0 [ 752.419582] [<ffffffff811beacd>] ? __sb_end_write+0x2d/0x60 [ 752.419591] [<ffffffff811bca00>] ? vfs_write+0x170/0x190 [ 752.419602] [<ffffffff811cf466>] ? SyS_ioctl+0x76/0x90 [ 752.419610] [<ffffffff811d1287>] ? SyS_poll+0x57/0xf0 [ 752.419622] [<ffffffff815538b2>] ? system_call_fast_compare_end+0xc/0x6b [ 752.419630] ---[ end trace fc58124cfd25ff8f ]--- [ 2310.130673] gdbus[2372]: segfault at f0 ip 00007f2e23d8a25d sp 00007f2e1a7af730 error 4 in libc-2.19.so[7f2e23d53000+19f000] [ 2438.536612] fuse init (API version 7.23) [ 3485.154167] [drm:intel_finish_crtc_commit [i915]] *ERROR* Atomic update failure on pipe A (start=98862 end=98863) [ 3543.985472] [drm:intel_finish_crtc_commit [i915]] *ERROR* Atomic update failure on pipe A (start=102385 end=102386) [ 3569.485283] [drm:intel_finish_crtc_commit [i915]] *ERROR* Atomic update failure on pipe A (start=103912 end=103913) [ 4222.785766] perf interrupt took too long (2516 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 4816.498842] wlx801f02e283f9: AP c8:0e:14:e1:c8:ac changed bandwidth, new config is 2462 MHz, width 2 (2452/0 MHz) [ 5119.792533] wlx801f02e283f9: AP c8:0e:14:e1:c8:ac changed bandwidth, new config is 2462 MHz, width 1 (2462/0 MHz) [ 5198.360203] [drm:intel_finish_crtc_commit [i915]] *ERROR* Atomic update failure on pipe A (start=33409 end=33410) ** Model information sys_vendor: Hewlett-Packard product_name: HP Pavilion x2 Detachable product_version: Type1 - ProductConfigId chassis_vendor: Hewlett-Packard chassis_version: Chassis Version bios_vendor: Insyde bios_version: F.11 board_vendor: Hewlett-Packard board_name: 815D board_version: 26.0E ** Loaded modules: fuse ecb ctr ccm nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc nls_utf8 nls_cp437 vfat fat arc4 rtl8192cu rtl_usb rtl8192c_common rtlwifi mac80211 cfg80211 intel_powerclamp intel_rapl coretemp kvm crct10dif_pclmul crc32_pclmul jitterentropy_rng drbg ansi_cprng snd_soc_sst_byt_rt5640_mach iTCO_wdt iTCO_vendor_support hp_wmi sparse_keymap rfkill hid_multitouch aesni_intel aes_x86_64 efi_pstore lrw gf128mul snd_soc_rt5640 glue_helper snd_soc_rl6231 ablk_helper cryptd snd_soc_core snd_compress efivars snd_pcm pcspkr snd_timer snd soundcore regmap_i2c battery joydev evdev i915 drm_kms_helper lpc_ich mfd_core drm i2c_algo_bit wmi button 8250_fintek video tpm_crb tpm processor_thermal_device dw_dmac intel_soc_dts_iosf int3402_thermal int3403_thermal dw_dmac_core int3400_thermal int340x_thermal_zone iosf_mbi acpi_thermal_rel snd_soc_sst_acpi ac i2c_designware_platform i2c_designware_core acpi_pad processor ecryptfs cbc sha256_ssse3 sha256_generic hmac encrypted_keys parport_pc ppdev lp parport efivarfs autofs4 ext4 crc16 mbcache jbd2 hid_generic usbhid mmc_block xhci_pci xhci_hcd crc32c_intel usbcore thermal usb_common thermal_sys i2c_hid sdhci_acpi hid sdhci mmc_core ** PCI devices: 00:00.0 Host bridge [0600]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series SoC Transaction Register [8086:0f00] (rev 0f) Subsystem: Hewlett-Packard Company Device [103c:815d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Kernel driver in use: iosf_mbi_pci 00:02.0 VGA compatible controller [0300]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Graphics & Display [8086:0f31] (rev 0f) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:815d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 31 Region 0: Memory at 90000000 (32-bit, non-prefetchable) [size=4M] Region 2: Memory at 80000000 (32-bit, prefetchable) [size=256M] Region 4: I/O ports at 1000 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: i915 00:14.0 USB controller [0c03]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series USB xHCI [8086:0f35] (rev 0f) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device [103c:815d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 27 Region 0: Memory at 90800000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: xhci_hcd 00:1a.0 Encryption controller [1080]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Trusted Execution Engine [8086:0f18] (rev 0f) Subsystem: Hewlett-Packard Company Device [103c:815d] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 255 Region 0: Memory at 90700000 (32-bit, non-prefetchable) [size=1M] Region 1: Memory at 90600000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> 00:1f.0 ISA bridge [0601]: Intel Corporation Atom Processor Z36xxx/Z37xxx Series Power Control Unit [8086:0f1c] (rev 0f) Subsystem: Hewlett-Packard Company Device [103c:815d] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Capabilities: <access denied> Kernel driver in use: lpc_ich ** USB devices: Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 7392:7811 Edimax Technology Co., Ltd EW-7811Un 802.11n Wireless Adapter [Realtek RTL8188CUS] Bus 001 Device 004: ID 04f3:074d Elan Microelectronics Corp. Bus 001 Device 002: ID 05e3:0610 Genesys Logic, Inc. 4-port hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub -- System Information: Debian Release: stretch/sid APT prefers testing-updates APT policy: (500, 'testing-updates'), (500, 'testing') Architecture: amd64 (x86_64) Kernel: Linux 4.2.0-1-amd64 (SMP w/4 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-4.2.0-1-amd64 depends on: ii debconf [debconf-2.0] 1.5.57 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod 21-1 ii linux-base 4.0 Versions of packages linux-image-4.2.0-1-amd64 recommends: ii firmware-linux-free 3.4 ii irqbalance 1.0.9-1 Versions of packages linux-image-4.2.0-1-amd64 suggests: pn debian-kernel-handbook <none> pn grub-pc | grub-efi | extlinux <none> pn linux-doc-4.2 <none> Versions of packages linux-image-4.2.0-1-amd64 is related to: pn firmware-atheros <none> pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> pn firmware-linux <none> pn firmware-linux-nonfree <none> pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 20151018-2 pn xen-hypervisor <none> -- debconf information: linux-image-4.2.0-1-amd64/prerm/removing-running-kernel-4.2.0-1-amd64: true linux-image-4.2.0-1-amd64/postinst/mips-initrd-4.2.0-1-amd64: linux-image-4.2.0-1-amd64/postinst/depmod-error-initrd-4.2.0-1-amd64: false
Attachment:
var_log_messages_i915
Description: Binary data