--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.13-1-powerpc-smp: dpkg reports errors during installation via aptitude
- From: Mehul Sanghvi <mehul.sanghvi@gmail.com>
- Date: Fri, 14 Mar 2014 16:02:45 -0400
- Message-id: <20140314200245.1064.15966.reportbug@tatooine.sanghvi.org>
Package: src:linux
Version: 3.13.5-1
Severity: normal
Dear Maintainer,
I get the following when I try to do an upgrade:
root# aptitude install linux-image-powerpc-smp
The following partially installed packages will be configured:
linux-image-3.13-1-powerpc-smp linux-image-powerpc-smp
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 96 not
upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.
Setting up linux-image-3.13-1-powerpc-smp (3.13.5-1) ...
vmlinux(/boot/vmlinux-3.13-1-powerpc-smp
) points to /boot/vmlinux-3.13-1-powerpc-smp
(/boot/vmlinux-3.13-1-powerpc-smp) -- doing nothing at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 263.
initrd.img(/boot/initrd.img-3.13-1-powerpc-smp
) points to /boot/initrd.img-3.13-1-powerpc-smp
(/boot/initrd.img-3.13-1-powerpc-smp) -- doing nothing at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 263.
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-3.13-1-powerpc-smp
run-parts: /etc/kernel/postinst.d/mkvmlinuz exited with return code 20
Failed to process /etc/kernel/postinst.d at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 591.
dpkg: error processing package linux-image-3.13-1-powerpc-smp
(--configure):
subprocess installed post-installation script returned error exit
status 1
dpkg: dependency problems prevent configuration of
linux-image-powerpc-smp:
linux-image-powerpc-smp depends on linux-image-3.13-1-powerpc-smp;
however:
Package linux-image-3.13-1-powerpc-smp is not configured yet.
dpkg: error processing package linux-image-powerpc-smp (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-3.13-1-powerpc-smp
linux-image-powerpc-smp
E: Sub-process /usr/bin/dpkg returned an error code (1)
Failed to perform requested operation on package. Trying to recover:
Setting up linux-image-3.13-1-powerpc-smp (3.13.5-1) ...
vmlinux(/boot/vmlinux-3.13-1-powerpc-smp
) points to /boot/vmlinux-3.13-1-powerpc-smp
(/boot/vmlinux-3.13-1-powerpc-smp) -- doing nothing at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 263.
initrd.img(/boot/initrd.img-3.13-1-powerpc-smp
) points to /boot/initrd.img-3.13-1-powerpc-smp
(/boot/initrd.img-3.13-1-powerpc-smp) -- doing nothing at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 263.
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-3.13-1-powerpc-smp
run-parts: /etc/kernel/postinst.d/mkvmlinuz exited with return code 20
Failed to process /etc/kernel/postinst.d at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 591.
dpkg: error processing package linux-image-3.13-1-powerpc-smp
(--configure):
subprocess installed post-installation script returned error exit
status 1
dpkg: dependency problems prevent configuration of
linux-image-powerpc-smp:
linux-image-powerpc-smp depends on linux-image-3.13-1-powerpc-smp;
however:
Package linux-image-3.13-1-powerpc-smp is not configured yet.
dpkg: error processing package linux-image-powerpc-smp (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-3.13-1-powerpc-smp
linux-image-powerpc-smp
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
revision : 2.9 (pvr 000c 0209)
revision : 2.9 (pvr 000c 0209)
platform : PowerMac
model : PowerMac3,3
machine : PowerMac3,3
motherboard : PowerMac3,3 MacRISC2 MacRISC Power Macintosh
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet static
address 192.168.70.1
broadcast 192.168.70.0
netmask 255.255.255.0
gateway 192.168.70.20
** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Inc. UniNorth AGP [106b:0020]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
0000:00:10.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Rage 128 PRO AGP 4x TMDS [1002:5046] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 94000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 90020000 [size=128K]
Capabilities: <access denied>
Kernel driver in use: aty128fb
0001:10:0b.0 Host bridge [0600]: Apple Inc. UniNorth PCI [106b:001f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0001:10:0d.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21154 [1011:0026] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Bus: primary=10, secondary=11, subordinate=11, sec-latency=32
Memory behind bridge: 80000000-800fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:11:07.0 Unassigned class [ff00]: Apple Inc. KeyLargo Mac I/O [106b:0022] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:11:08.0 USB controller [0c03]: Apple Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
0001:11:09.0 USB controller [0c03]: Apple Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
0001:11:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) [104c:8020] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 80084000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0002:21:0b.0 Host bridge [0600]: Apple Inc. UniNorth Internal PCI [106b:001e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0002:21:0f.0 Ethernet controller [0200]: Apple Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5000000 [disabled] [size=1M]
Kernel driver in use: gem
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 05a4:9861 Ortek Technology, Inc.
Bus 001 Device 007: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
Bus 001 Device 002: ID 05a4:9836 Ortek Technology, Inc.
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: powerpc (ppc)
Kernel: Linux 3.12-1-powerpc-smp (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.13-1-powerpc-smp depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.13-1-powerpc-smp recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.13-1-powerpc-smp suggests:
pn debian-kernel-handbook <none>
pn linux-doc-3.13 <none>
ii mkvmlinuz 36
Versions of packages linux-image-3.13-1-powerpc-smp is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.41
ii firmware-linux-nonfree 0.41
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.13-1-powerpc-smp/prerm/removing-running-kernel-3.13-1-powerpc-smp: true
linux-image-3.13-1-powerpc-smp/postinst/depmod-error-initrd-3.13-1-powerpc-smp: false
--- End Message ---
--- Begin Message ---
Source: mkvmlinuz
Source-Version: 38
We believe that the bug you reported is fixed in the latest version of
mkvmlinuz, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 741642@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Milan Kupcevic <milan@physics.harvard.edu> (supplier of updated mkvmlinuz package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Sat, 11 Jul 2015 21:37:08 -0400
Source: mkvmlinuz
Binary: mkvmlinuz
Architecture: source
Version: 38
Distribution: unstable
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Milan Kupcevic <milan@physics.harvard.edu>
Description:
mkvmlinuz - create a kernel to boot a PowerPC machine from Open Firmware
Closes: 712659 741642
Changes:
mkvmlinuz (38) unstable; urgency=medium
.
* Depend on vim-common. (Closes: #712659)
* Push run-parts output to stderr. (Closes: #741642)
* Conform to Debian Policy standards version 3.9.6
Checksums-Sha1:
5ba5bed46568127fdc8da6b2489fef3c979a5acd 1665 mkvmlinuz_38.dsc
46e1a734c5bfbdb3039d0d111baa47545d35866b 52676 mkvmlinuz_38.tar.xz
Checksums-Sha256:
bdce9a982500222ff12171501cf865a05f8402b2582e407d53153ff408f5402e 1665 mkvmlinuz_38.dsc
df1ba511037913cc3223f962aa520b697037b5e65956efc180bd8a603107e949 52676 mkvmlinuz_38.tar.xz
Files:
d3588fef6659b40ad0088f91113f046f 1665 utils optional mkvmlinuz_38.dsc
46428feedd55984166eebd051272f457 52676 utils optional mkvmlinuz_38.tar.xz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=h4j3
-----END PGP SIGNATURE-----
--- End Message ---