Bug#785705: linux-image-3.16.0-0.bpo.4-amd64: kernel NULL pointer oops in r8169 realtek driver rtl8169_poll
Package: src:linux
Version: 3.16.7-ckt9-3~deb8u1~bpo70+1
Severity: important
Hi,
Kernel crashed with NULL pointer into an Oops.
Last things I did when I got this triggered:
1) Battery on laptop went very low (critical: red mark)
2) I plugged in power chord
3) Let around 1 minute with power chord in to charge
4) I plugged in via USB my tablet in order to charge its battery
5) Laptop went into stand by mode
6) I waited until it settled into stand by
7) Activated to exit stand by, by pressing the power button
8) It booted back to the login screen (NOTE: 1/3 of the screen was black)
9) TRIGGER: after I typed in my password to login the oops occured
Please also check the attached screenshot for the full Oops.
Thanks in advance,
Alex
-- Package-specific info:
** Version:
Linux version 3.16.0-0.bpo.4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.16.7-ckt9-3~deb8u1~bpo70+1 (2015-04-27)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-0.bpo.4-amd64 root=UUID=206d4688-79d7-45d9-8d1d-f2e8e8674962 ro quiet
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 12.369331] lis3lv02d: 8 bits 3DC sensor found
[ 12.423384] [drm] Memory usable by graphics device = 2048M
[ 12.423387] [drm] Replacing VGA console driver
[ 12.424486] Console: switching to colour dummy device 80x25
[ 12.424870] [drm] ACPI BIOS requests an excessive sleep of 5000 ms, using 1500 ms instead
[ 12.434143] tpm_tis 00:05: TPM is disabled/deactivated (0x7)
[ 12.446214] i915 0000:00:02.0: irq 66 for MSI/MSI-X
[ 12.446226] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.446228] [drm] Driver supports precise vblank timestamp query.
[ 12.446273] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.471616] [drm] VBT doesn't support DRRS
[ 12.505088] fbcon: inteldrmfb (fb0) is primary device
[ 12.514154] ACPI: Battery Slot [BAT0] (battery present)
[ 12.514648] wmi: Mapper loaded
[ 12.778892] input: PC Speaker as /devices/platform/pcspkr/input/input13
[ 12.950498] cfg80211: Calling CRDA to update world regulatory domain
[ 13.143984] AVX2 version of gcm_enc/dec engaged.
[ 13.145495] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 13.160117] alg: No test for crc32 (crc32-pclmul)
[ 13.583585] rtl8723be: Using firmware rtlwifi/rtl8723befw.bin
[ 13.583913] psmouse serio3: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xf00173/0x640000/0xa2400, board id: 2654, fw id: 1323623
[ 13.594899] Console: switching to colour frame buffer device 200x56
[ 13.597757] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.597758] i915 0000:00:02.0: registered panic notifier
[ 13.620802] intel_rapl: Found RAPL domain package
[ 13.620806] intel_rapl: Found RAPL domain core
[ 13.620808] intel_rapl: Found RAPL domain uncore
[ 13.620810] intel_rapl: Found RAPL domain dram
[ 13.620940] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input12
[ 13.670763] rtl8723be 0000:09:00.0: firmware: direct-loading firmware rtlwifi/rtl8723befw.bin
[ 13.706954] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input15
[ 13.723357] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 13.725194] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 13.725279] [Firmware Bug]: ACPI(DGFX) defines _DOD but not _DOS
[ 13.725456] ACPI: Video Device [DGFX] (multi-head: yes rom: no post: no)
[ 13.725522] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:40/LNXVIDEO:01/input/input17
[ 13.725569] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 13.725998] snd_hda_intel 0000:00:1b.0: irq 67 for MSI/MSI-X
[ 13.733327] snd_hda_intel 0000:00:03.0: irq 68 for MSI/MSI-X
[ 13.835116] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 13.839133] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 13.839349] rtlwifi: wireless switch is on
[ 13.891296] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 13.891299] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 13.891301] sound hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 13.891302] sound hdaudioC1D0: mono: mono_out=0x0
[ 13.891303] sound hdaudioC1D0: inputs:
[ 13.891304] sound hdaudioC1D0: Mic=0x19
[ 13.891306] sound hdaudioC1D0: Internal Mic=0x12
[ 13.898098] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[ 13.898150] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[ 13.898198] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[ 13.898281] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input22
[ 13.898541] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input23
[ 13.898601] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input24
[ 13.979247] input: HP WMI hotkeys as /devices/virtual/input/input18
[ 14.081939] iTCO_vendor_support: vendor-support=0
[ 14.115480] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 14.115512] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 14.115640] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.213817] Bluetooth: Core ver 2.19
[ 14.213832] NET: Registered protocol family 31
[ 14.213833] Bluetooth: HCI device and connection manager initialized
[ 14.213839] Bluetooth: HCI socket layer initialized
[ 14.213841] Bluetooth: L2CAP socket layer initialized
[ 14.213852] Bluetooth: SCO socket layer initialized
[ 14.305000] usbcore: registered new interface driver btusb
[ 14.861954] Adding 4095996k swap on /dev/sda1. Priority:-1 extents:1 across:4095996k FS
[ 15.226986] cfg80211: World regulatory domain updated:
[ 15.226991] cfg80211: DFS Master region: unset
[ 15.226992] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 15.226995] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.226996] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.226998] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.227000] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 15.227002] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 15.227003] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 15.227005] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 15.227006] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 25.753197] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 25.974976] systemd-journald[194]: Received request to flush runtime journal from PID 1
[ 34.643627] Bridge firewalling registered
[ 34.744999] r8169 0000:08:00.0: firmware: direct-loading firmware rtl_nic/rtl8168g-3.fw
[ 34.757900] r8169 0000:08:00.0 eth0: link down
[ 34.757921] r8169 0000:08:00.0 eth0: link down
[ 34.757952] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 35.232116] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 36.862066] r8169 0000:08:00.0 eth0: link up
[ 36.862074] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 40.823939] vboxdrv: Found 4 processor cores.
[ 40.824070] vboxdrv: fAsync=0 offMin=0x26a offMax=0x1245
[ 40.824129] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 40.824130] vboxdrv: Successfully loaded version 4.3.18_Debian (interface 0x001a0008).
[ 41.344451] vboxpci: IOMMU not found (not registered)
[ 80.872029] gsettings[2057]: segfault at 20 ip 00007f29608fcec3 sp 00007ffde28b6b98 error 6 in libgio-2.0.so.0.4200.1[7f2960847000+171000]
[ 82.478664] traps: variety[1896] trap int3 ip:7f683d759d30 sp:7ffe66529650 error:0
[ 98.913937] device eth0 entered promiscuous mode
[ 98.914008] br0: port 1(eth0) entered forwarding state
[ 98.914019] br0: port 1(eth0) entered forwarding state
[ 113.964351] br0: port 1(eth0) entered forwarding state
** Model information
sys_vendor: Hewlett-Packard
product_name: HP ProBook 470 G2
product_version: A3008CD10003
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: M74 Ver. 01.04
board_vendor: Hewlett-Packard
board_name: 2249
board_version: KBC Version 67.22
** Loaded modules:
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
bridge
stp
llc
binfmt_misc
cpufreq_powersave
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
ecb
btusb
bluetooth
iTCO_wdt
iTCO_vendor_support
6lowpan_iphc
snd_hda_codec_realtek
snd_hda_codec_hdmi
snd_hda_codec_generic
arc4
x86_pkg_temp_thermal
joydev
hp_wmi
sparse_keymap
intel_powerclamp
intel_rapl
rtl8723be
coretemp
kvm_intel
kvm
btcoexist
rtl8723_common
crc32_pclmul
rtl_pci
ghash_clmulni_intel
aesni_intel
rtlwifi
aes_x86_64
mac80211
lrw
gf128mul
glue_helper
ablk_helper
cfg80211
cryptd
snd_hda_intel
snd_hda_controller
snd_hda_codec
evdev
rfkill
pcspkr
psmouse
serio_raw
snd_hwdep
tpm_infineon
rtsx_pci_ms
memstick
snd_pcm
i915
wmi
snd_timer
drm_kms_helper
drm
battery
hp_accel
lpc_ich
lis3lv02d
input_polldev
snd
tpm_tis
soundcore
tpm
i2c_algo_bit
i2c_core
shpchp
hp_wireless
video
ac
button
mei_me
mei
processor
loop
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
hid_generic
usbhid
hid
sg
sr_mod
cdrom
sd_mod
crc_t10dif
crct10dif_generic
rtsx_pci_sdmmc
mmc_core
r8169
mii
crct10dif_pclmul
crct10dif_common
ahci
libahci
crc32c_intel
libata
ehci_pci
scsi_mod
ehci_hcd
rtsx_pci
mfd_core
xhci_hcd
usbcore
usb_common
thermal
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Haswell-ULT DRAM Controller [8086:0a04] (rev 0b)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 66
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 8000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Haswell-ULT HD Audio Controller [8086:0a0c] (rev 0b)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 68
Region 0: Memory at d0910000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series USB xHCI HC [8086:9c31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 61
Region 0: Memory at d0900000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series HECI #0 [8086:9c3a] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 65
Region 0: Memory at d0919000 (64-bit, non-prefetchable) [size=32]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1b.0 Audio device [0403]: Intel Corporation 8 Series HD Audio Controller [8086:9c20] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 67
Region 0: Memory at d0914000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 1 [8086:9c10] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=06, sec-latency=0
Memory behind bridge: d0800000-d08fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 2 [8086:9c12] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
I/O behind bridge: 00006000-00007fff
Memory behind bridge: d0700000-d07fffff
Prefetchable memory behind bridge: 000000009fb00000-000000009fcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 3 [8086:9c14] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d0600000-d06fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 4 [8086:9c16] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0500000-d05fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series PCI Express Root Port 5 [8086:9c18] (rev e4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0a, subordinate=0a, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d0400000-d04fffff
Prefetchable memory behind bridge: 00000000a0000000-00000000b01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series USB EHCI #1 [8086:9c26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 17
Region 0: Memory at d091d000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation 8 Series LPC Controller [8086:9c43] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] [8086:9c03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 64
Region 0: I/O ports at 8088 [size=8]
Region 1: I/O ports at 8094 [size=4]
Region 2: I/O ports at 8080 [size=8]
Region 3: I/O ports at 8090 [size=4]
Region 4: I/O ports at 8060 [size=32]
Region 5: Memory at d091c000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.6 Signal processing controller [1180]: Intel Corporation 8 Series Thermal [8086:9c24] (rev 04)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 0: Memory at d091b000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
07:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 62
Region 0: Memory at d0700000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
08:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Hewlett-Packard Company Device [103c:2249]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 63
Region 0: I/O ports at 5000 [size=256]
Region 2: Memory at d0604000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at d0600000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
09:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
Subsystem: Hewlett-Packard Company Device [103c:2231]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 19
Region 0: I/O ports at 4000 [size=256]
Region 2: Memory at d0500000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: rtl8723be
0a:00.0 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] Topaz PRO [Radeon R5 M255] [1002:6901]
Subsystem: Hewlett-Packard Company Device [103c:224a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 10
Region 0: Memory at a0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at b0000000 (64-bit, prefetchable) [size=2M]
Region 4: I/O ports at 3000 [size=256]
Region 5: Memory at d0400000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at d0440000 [disabled] [size=128K]
Capabilities: <access denied>
** USB devices:
Bus 003 Device 002: ID 8087:8000 Intel Corp.
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 05c8:0359 Cheng Uei Precision Industry Co., Ltd (Foxlink)
Bus 001 Device 005: ID 138a:003f Validity Sensors, Inc.
Bus 001 Device 004: ID 0bda:b001 Realtek Semiconductor Corp.
Bus 001 Device 003: ID 8087:0a15 Intel Corp.
Bus 001 Device 002: ID 04f3:0235 Elan Microelectronics Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-0.bpo.4-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-0.bpo.4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools 0.120
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-0.bpo.4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-0.bpo.4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-0.bpo.4-amd64 is related to:
ii firmware-atheros 0.43
ii firmware-bnx2 0.43
ii firmware-bnx2x 0.43
ii firmware-brcm80211 0.43
ii firmware-intelwimax 0.43
ii firmware-ipw2x00 0.43
ii firmware-ivtv 0.43
ii firmware-iwlwifi 0.43
ii firmware-libertas 0.43
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
ii firmware-myricom 0.43
ii firmware-netxen 0.43
ii firmware-qlogic 0.43
ii firmware-ralink 0.43
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-0.bpo.4-amd64/postinst/depmod-error-initrd-3.16.0-0.bpo.4-amd64: false
linux-image-3.16.0-0.bpo.4-amd64/prerm/removing-running-kernel-3.16.0-0.bpo.4-amd64: true
linux-image-3.16.0-0.bpo.4-amd64/postinst/mips-initrd-3.16.0-0.bpo.4-amd64:
Reply to: