[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#785277: [4.0][regression] r8169: (unnamed net_device) (uninitialized): unknown MAC, using family default



Package: src:linux
Version: 4.0.2-1
Severity: important
Tags: upstream
Control: notfound -1 linux/3.19-1~exp1

Dear Debian folks,


Booting with `linux-image-4.0.0-1-686-pae` 4.0.2-1 the following errors
are shown on the monitor.

        r8169 0000:03:00.0 (unnamed net_device) (uninitialized): rtl_chipcmd_cond == 1 (loop: 100, delay: 100).

Here are all message from the module r8169.

        $ dmesg | grep r8169
        [    1.309298] calling  rtl8169_pci_driver_init+0x0/0x1000 [r8169] @ 72
        [    1.309412] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
        [    1.309648] r8169 0000:03:00.0 (unnamed net_device) (uninitialized): unknown MAC, using family default
        [    1.324615] r8169 0000:03:00.0 (unnamed net_device) (uninitialized): rtl_chipcmd_cond == 1 (loop: 100, delay: 100).
        [    1.336859] r8169 0000:03:00.0 eth0: RTL8168b/8111b at 0xf8222000, ff:ff:ff:ff:ff:ff, XID 9cf0f8ff IRQ 26
        [    1.336869] r8169 0000:03:00.0 eth0: jumbo features [frames: 4080 bytes, tx checksumming: ko]
        [    1.336949] initcall rtl8169_pci_driver_init+0x0/0x1000 [r8169] returned 0 after 26918 usecs

The MAC address of the device is ff:ff:ff:ff:ff:ff.

        $ ip addr show dev eth0
        2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
            link/ether ff:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff

This regression was reported to the Linux kernel linux-pci mailing list
[1] and is supposedly a regression of commit *x86/PCI/ACPI: Ignore
resources consumed by host bridge itself*.

I’ll paste Gerry’s reply in here for completeness.

> Hi Bernhard,
> 	Thanks for providing acpi data. I have figured out the cause of
> the regression. Your platform defines PCI host bridge MMIO resources as:
>             Name (CRES, ResourceTemplate ()
>             {
>                 IO (Decode16,
>                     0x0CF8,             // Range Minimum
>                     0x0CF8,             // Range Maximum
>                     0x01,               // Alignment
>                     0x08,               // Length
>                     )
>                 WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode,
> EntireRange,
>                     0x0000,             // Granularity
>                     0x0000,             // Range Minimum
>                     0x0CF7,             // Range Maximum
>                     0x0000,             // Translation Offset
>                     0x0CF8,             // Length
>                     ,, , TypeStatic)
>                 WordIO (ResourceProducer, MinFixed, MaxFixed, PosDecode,
> EntireRange,
>                     0x0000,             // Granularity
>                     0x0D00,             // Range Minimum
>                     0xFFFF,             // Range Maximum
>                     0x0000,             // Translation Offset
>                     0xF300,             // Length
>                     ,, , TypeStatic)
>                 Memory32Fixed (ReadOnly,
>                     0x000A0000,         // Address Base
>                     0x00020000,         // Address Length
>                     )
>                 Memory32Fixed (ReadOnly,
>                     0x00000000,         // Address Base
>                     0x00000000,         // Address Length
>                     _Y00)
>             })
> 
> With commit (x86/PCI/ACPI: Ignore resources consumed by host bridge
> itself), all resources without PRODUCER flag will be ignored, so
> MMIO defined by Memory32Fixed operator gets ignored. The fix is only
> to ignore IO resources without PRODUCER flag and keeps all MMIO
> resources no matter PRODUCER is set or not.
> Could you please help to try following patch?
> Regards!
> Gerry
> 
> diff --git a/arch/x86/pci/acpi.c b/arch/x86/pci/acpi.c
> index e4695985f9de..66d7dbe56926 100644
> --- a/arch/x86/pci/acpi.c
> +++ b/arch/x86/pci/acpi.c
> @@ -346,7 +346,7 @@ static void probe_pci_root_info(struct pci_root_info *info,
>                         "no IO and memory resources present in _CRS\n");
>         else
>                 resource_list_for_each_entry_safe(entry, tmp, list) {
> -                       if ((entry->res->flags & IORESOURCE_WINDOW) == 0 ||
> +                       if ((entry->res->flags & (IORESOURCE_WINDOW | IORESOURCE_IO)) == IORESOURCE_IO ||
>                             (entry->res->flags & IORESOURCE_DISABLED))
>                                 resource_list_destroy_entry(entry);
>                         else


Thanks,

Paul


[1] http://www.spinics.net/lists/linux-pci/msg39706.html
-- Package-specific info:
** Version:
Linux version 4.0.0-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-16) ) #1 SMP Debian 4.0.2-1 (2015-05-11)

** Command line:
BOOT_IMAGE=/vmlinuz-4.0.0-1-686-pae root=/dev/mapper/speicher-root ro rdinitrd=/sbin/bootchartd initcall_debug printk.time=y init=/sbin/bootchartd drm_kms_helper.poll=0 drm.debug=0x06 log_buf_len=2M quiet noisapnp console=ttyS0,115200 console=tty0 pcie_aspm=force pcie_aspm.policy=powersave radeon.dpm=1

** Not tainted

** Kernel log:
[…]

** Model information
not available

** Loaded modules:
ebtable_filter
ebtables
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
ctr
ccm
binfmt_misc
xfs
libcrc32c
arc4
rt2800usb
rt2x00usb
rt2800lib
rt2x00lib
reiserfs
mac80211
cfg80211
snd_hda_codec_realtek
crc_ccitt
rfkill
snd_hda_codec_generic
snd_hda_codec_hdmi
snd_hda_intel
snd_hda_controller
snd_hda_codec
kvm_amd
snd_hwdep
snd_pcm_oss
kvm
radeon
snd_mixer_oss
psmouse
snd_pcm
ttm
snd_timer
snd
i2c_piix4
serio_raw
evdev
drm_kms_helper
drm
i2c_algo_bit
k10temp
soundcore
shpchp
i2c_core
button
acpi_cpufreq
processor
nct6775
hwmon_vid
loop
firewire_sbp2
firewire_core
crc_itu_t
fuse
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
btrfs
xor
raid6_pq
sha256_generic
ecb
cbc
algif_skcipher
af_alg
dm_crypt
dm_mod
raid1
md_mod
hid_generic
usbhid
hid
sg
sd_mod
r8169
mii
ohci_pci
fan
thermal
thermal_sys
ahci
libahci
libata
sp5100_tco
ehci_pci
ohci_hcd
ehci_hcd
scsi_mod
usbcore
usb_common

** Network interface configuration:

auto lo
iface lo inet loopback

allow-hotplug eth0

allow-hotplug eth6
iface eth6 inet static
	address 192.168.0.1
	netmask 255.255.255.0
	gateway 192.168.1.1

** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
    link/ether ff:ff:ff:ff:ff:ff brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
    link/ether 00:14:d1:6b:33:60 brd ff:ff:ff:ff:ff:ff
    inet 192.168.178.73/24 brd 192.168.178.255 scope global dynamic wlan0
       valid_lft 861778sec preferred_lft 861778sec
    inet6 fe80::214:d1ff:fe6b:3360/64 scope link 
       valid_lft forever preferred_lft forever

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
 wlan0: 514018519  354789    0    0    0     0          0         0 16599115  186234    0    0    0     0       0          0
    lo:     480       8    0    0    0     0          0         0      480       8    0    0    0     0       0          0
  eth0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    354165 total packets received
    0 forwarded
    0 incoming packets discarded
    353573 incoming packets delivered
    186134 requests sent out
    23 dropped because of missing route
Icmp:
    0 ICMP messages received
    0 input ICMP message failed.
    ICMP input histogram:
    0 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
Tcp:
    187 active connections openings
    0 passive connection openings
    4 failed connection attempts
    25 connection resets received
    4 connections established
    353258 segments received
    185678 segments send out
    132 segments retransmited
    1 bad segments received.
    57 resets sent
Udp:
    276 packets received
    0 packets to unknown port received.
    0 packet receive errors
    291 packets sent
    IgnoredMulti: 12
UdpLite:
TcpExt:
    41 TCP sockets finished time wait in fast timer
    878 delayed acks sent
    Quick ack mode was activated 407 times
    108 packets directly queued to recvmsg prequeue.
    15875 bytes directly received in process context from prequeue
    337473 packet headers predicted
    18 packets header predicted and directly queued to user
    806 acknowledgments not containing data payload received
    773 predicted acknowledgments
    8 times recovered from packet loss by selective acknowledgements
    6 congestion windows recovered without slow start by DSACK
    11 congestion windows recovered without slow start after partial ack
    5 timeouts after SACK recovery
    8 fast retransmits
    16 other TCP timeouts
    TCPLossProbes: 80
    TCPLossProbeRecovery: 4
    103 DSACKs sent for old packets
    57 DSACKs received
    11 DSACKs for out of order packets received
    5 connections reset due to unexpected data
    24 connections reset due to early user close
    TCPDSACKIgnoredNoUndo: 22
    TCPSpuriousRTOs: 1
    TCPSackShiftFallback: 56
    TCPRcvCoalesce: 176597
    TCPOFOQueue: 6193
    TCPChallengeACK: 1
    TCPSYNChallenge: 1
    TCPAutoCorking: 153
    TCPSynRetrans: 18
    TCPOrigDataSent: 2096
IpExt:
    InMcastPkts: 52
    OutMcastPkts: 50
    InBcastPkts: 14
    OutBcastPkts: 4
    InOctets: 508984917
    OutOctets: 10258611
    InMcastOctets: 5584
    OutMcastOctets: 4847
    InBcastOctets: 3252
    OutBcastOctets: 196
    InNoECTPkts: 354165


** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex [1022:1510]
	Subsystem: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex [1022:1510]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310] [1002:9802] (prog-if 00 [VGA controller])
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6310] [1002:9802]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
	Region 1: I/O ports at 2000 [size=256]
	Region 2: Memory at f0100000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: radeon

00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio [1002:1314]
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio [1002:1314]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 28
	Region 0: Memory at f0140000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (rev 40) (prog-if 01 [AHCI 1.0])
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 19
	Region 0: I/O ports at 2410 [size=8]
	Region 1: I/O ports at 2420 [size=4]
	Region 2: I/O ports at 2418 [size=8]
	Region 3: I/O ports at 2424 [size=4]
	Region 4: I/O ports at 2400 [size=16]
	Region 5: Memory at f014b000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f0148000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci

00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at f014b400 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at f0149000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci

00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at f014b500 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42)
	Subsystem: Advanced Micro Devices, Inc. [AMD] Device [1022:1510]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f0144000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40)
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode])
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
	Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399]
	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at f014a000 (32-bit, non-prefetchable) [size=4K]
	Kernel driver in use: ohci-pci

00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:15.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity+ SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43)
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 [1022:1701]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 [1022:1702]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 [1022:1703]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Capabilities: <access denied>
	Kernel driver in use: k10temp

00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 [1022:1704]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 [1022:1718]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 [1022:1716]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 [1022:1719]
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-

03:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 06)
	Subsystem: ASRock Incorporation Motherboard (one of many) [1849:8168]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 26
	Region 0: I/O ports at 1000 [size=256]
	Region 2: Memory at f0004000 (64-bit, prefetchable) [size=4K]
	Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: r8169


** USB devices:
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 148f:2870 Ralink Technology, Corp. RT2870 Wireless Adapter
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 046d:c312 Logitech, Inc. DeLuxe 250 Keyboard
Bus 003 Device 002: ID 1241:1122 Belkin Typhoon Stream Optical Mouse USB+PS/2
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: stretch/sid
  APT prefers unstable
  APT policy: (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 4.0.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-4.0.0-1-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.56
ii  initramfs-tools [linux-initramfs-tool]  0.120
ii  kmod                                    20-1
ii  linux-base                              3.5
ii  module-init-tools                       20-1

Versions of packages linux-image-4.0.0-1-686-pae recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3
ii  libc6-i686           2.19-18

Versions of packages linux-image-4.0.0-1-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-22
pn  linux-doc-4.0           <none>

Versions of packages linux-image-4.0.0-1-686-pae is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
ii  firmware-linux          0.43
ii  firmware-linux-nonfree  0.43
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
ii  firmware-ralink         0.43
ii  firmware-realtek        0.43
pn  xen-hypervisor          <none>

-- debconf information excluded

Attachment: signature.asc
Description: This is a digitally signed message part


Reply to: