Bug#783934: linux-image-3.16.0-4-amd64: systemd-udev-settle waiting 50 s during boot for snd-usb-audio
Package: src:linux
Version: 3.16.7-ckt9-3~deb8u1
Severity: normal
I have a freshly install debian jessie where systemd-udev-settle accounts for a
very long bootup time:
systemd-analyze blame:
56.397s systemd-udev-settle.service
2.735s postfix.service
482ms NetworkManager.service
...
We have discussed this on the debian user mailinglist https://lists.debian.org
/debian-user/2015/04/msg01575.html
With the help of the list I was able to debug the issue. It is related to my
keyboard which happens to have a sound module included. Somehow the sound
detection during boot can not handle that and gets stuck for along time.
journalctl says:
#### last 2 message where everything is still ok
Apr 30 07:28:01 xxx systemd-udevd[175]: seq 1601 queued, 'add' 'input'
Apr 30 07:28:01 xxx systemd-udevd[175]: seq 1602 queued, 'add' 'input'
#### several seconds no progress but thousands of udev messages which I can not
see
Apr 30 07:28:19 xxx systemd-journal[170]: Forwarding to syslog missed 3809
messages.
#### and than:
Apr 30 07:28:50 xxx kernel: usbcore: registered new interface driver snd-usb-
audio
Apr 30 07:28:50 xxx systemd-udevd[175]: seq 1603 queued, 'add' 'sound'
Apr 30 07:28:50 xxx systemd-udevd[175]: seq 1604 queued, 'add' 'sound'
####
The keyboard has a USB 2.0 hub and a snd module with mic and headphone
connectors. I dont know if the sound module was ever working. Never used it for
the last couple of years.
I can fix the boot problem by blacklisting snd-usb-audio. But that just seems
to be a workaround. It was suggested on the mailing list that this might be a
kernel bug. So here it is for you to investigate.
hwinfo for the keyboard:
52: USB 00.0: 10503 USB Mouse
[Created at usb.122]
Unique ID: __6e.ykItPQs8ue8
Parent ID: Uc5H.TI3vE1oZtwF
SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.1/1-4.1:1.0
SysFS BusID: 1-4.1:1.0
Hardware Class: mouse
Model: "KYE NetScroll+ Traveler"
Hotplug: USB
Vendor: usb 0x0458 "KYE Systems"
Device: usb 0x002e "NetScroll+ Traveler"
Compatible to: int 0x0200 0x0001 "Generic USB Mouse"
Driver: "usbhid"
Driver Modules: "usbhid"
Speed: 1.5 Mbps
Module Alias: "usb:v0458p002Ed0000dc00dsc00dp00ic03isc01ip02in00"
Driver Info #0:
XFree86 Protocol: explorerps/2
GPM Protocol: exps2
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #62 (Hub)
53: USB 00.0: 10800 Keyboard
[Created at usb.122]
Unique ID: sFNz.BMubaYkkWv5
Parent ID: Uc5H.TI3vE1oZtwF
SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.3/1-4.3:1.0
SysFS BusID: 1-4.3:1.0
Hardware Class: keyboard
Model: "Monterey International Keyboard"
Hotplug: USB
Vendor: usb 0x0566 "Monterey International Corp."
Device: usb 0x3108
Revision: "3.01"
Driver: "usbhid"
Driver Modules: "usbhid"
Speed: 1.5 Mbps
Module Alias: "usb:v0566p3108d0301dc00dsc00dp00ic03isc01ip01in00"
Driver Info #0:
XkbRules: xfree86
XkbModel: pc104
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #62 (Hub)
54: USB 00.1: 0000 Unclassified device
[Created at usb.122]
Unique ID: JRd1.wSzlx4YKRyF
Parent ID: Uc5H.TI3vE1oZtwF
SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.3/1-4.3:1.1
SysFS BusID: 1-4.3:1.1
Hardware Class: unknown
Model: "Monterey International Unclassified device"
Hotplug: USB
Vendor: usb 0x0566 "Monterey International Corp."
Device: usb 0x3108
Revision: "3.01"
Driver: "usbhid"
Driver Modules: "usbhid"
Speed: 1.5 Mbps
Module Alias: "usb:v0566p3108d0301dc00dsc00dp00ic03isc00ip00in01"
Driver Info #0:
Driver Status: usbhid is active
Driver Activation Cmd: "modprobe usbhid"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #62 (Hub)
55: USB 00.0: 0401 Multimedia audio controller
[Created at usb.122]
Unique ID: IO+7.DGe+0l9GPv1
Parent ID: Uc5H.TI3vE1oZtwF
SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.0
SysFS BusID: 1-4.4:1.0
Hardware Class: sound
Model: "Elan Microelectronics USB Audio"
Hotplug: USB
Vendor: usb 0x04f3 "Elan Microelectronics Corp."
Device: usb 0x0a11 "USB Audio"
Revision: "1.00"
Driver: "snd-usb-audio"
Driver Modules: "snd_usb_audio"
Speed: 12 Mbps
Module Alias: "usb:v04F3p0A11d0100dc00dsc00dp00ic01isc01ip00in00"
Driver Info #0:
Driver Status: snd_usb_audio is active
Driver Activation Cmd: "modprobe snd_usb_audio"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #62 (Hub)
58: USB 00.3: 0000 Unclassified device
[Created at usb.122]
Unique ID: fwlK.e6_dCN4Dx+9
Parent ID: Uc5H.TI3vE1oZtwF
SysFS ID: /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4.4/1-4.4:1.3
SysFS BusID: 1-4.4:1.3
Hardware Class: unknown
Model: "Elan Microelectronics USB Audio"
Hotplug: USB
Vendor: usb 0x04f3 "Elan Microelectronics Corp."
Device: usb 0x0a11 "USB Audio"
Revision: "1.00"
Driver: "usbhid"
Driver Modules: "usbhid"
Speed: 12 Mbps
Module Alias: "usb:v04F3p0A11d0100dc00dsc00dp00ic03isc00ip00in03"
Driver Info #0:
Driver Status: usbhid is active
Driver Activation Cmd: "modprobe usbhid"
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #62 (Hub)
###
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-3~deb8u1 (2015-04-24)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=7c5a310c-d036-4c53-9285-d439c0e96ab2 ro quiet
** Not tainted
** Kernel log:
[ 4.908076] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.908778] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 4.908826] sp5100_tco: PCI Revision ID: 0x3c
[ 4.908854] sp5100_tco: failed to find MMIO address, giving up.
[ 4.978072] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
[ 4.978075] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 4.978211] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 4.978214] nouveau [ VBIOS][0000:01:00.0] version 70.18.39.00.17
[ 4.982957] EDAC MC: Ver: 3.0.0
[ 4.985416] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
[ 4.986949] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 5.007140] nouveau 0000:01:00.0: irq 43 for MSI/MSI-X
[ 5.007159] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 5.007207] nouveau W[ PFB][0000:01:00.0][0x00000000][ffff8800b9978000] reclocking of this ram type unsupported
[ 5.007210] nouveau [ PFB][0000:01:00.0] RAM type: DDR2
[ 5.007211] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 5.007213] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 5.012732] nouveau [ VOLT][0000:01:00.0] GPU voltage: 900000uv
[ 5.021792] kvm: Nested Virtualization enabled
[ 5.024982] powernow_k8: fid 0x16 (3000 MHz), vid 0x8
[ 5.024986] powernow_k8: fid 0x14 (2800 MHz), vid 0xa
[ 5.024987] powernow_k8: fid 0x12 (2600 MHz), vid 0xc
[ 5.024988] powernow_k8: fid 0x10 (2400 MHz), vid 0xe
[ 5.024989] powernow_k8: fid 0xe (2200 MHz), vid 0x10
[ 5.024990] powernow_k8: fid 0xc (2000 MHz), vid 0x10
[ 5.024991] powernow_k8: fid 0xa (1800 MHz), vid 0x10
[ 5.024992] powernow_k8: fid 0x2 (1000 MHz), vid 0x12
[ 5.025047] powernow_k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 6000+ (2 cpu cores) (version 2.20.00)
[ 5.027033] MCE: In-kernel MCE decoding enabled.
[ 5.027809] AMD64 EDAC driver v3.4.0
[ 5.027839] EDAC amd64: DRAM ECC disabled.
[ 5.027843] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
(Note that use of the override may cause unknown side effects.)
[ 5.055125] Adding 4191648k swap on /dev/sdc2. Priority:-1 extents:1 across:4191648k SSFS
[ 5.234769] EXT4-fs (sdc1): re-mounted. Opts: errors=remount-ro
[ 5.252379] EXT4-fs (sdc3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.262779] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.273543] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: (null)
[ 5.454525] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 5.486436] systemd-journald[178]: Received request to flush runtime journal from PID 1
[ 5.783755] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0/input8
[ 5.783950] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0/input9
[ 5.784778] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0/input10
[ 5.785002] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0/input11
[ 5.883105] RPC: Registered named UNIX socket transport module.
[ 5.883109] RPC: Registered udp transport module.
[ 5.883110] RPC: Registered tcp transport module.
[ 5.883111] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.887037] FS-Cache: Loaded
[ 5.894329] FS-Cache: Netfs 'nfs' registered for caching
[ 5.902704] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 6.131661] cfg80211: Calling CRDA to update world regulatory domain
[ 6.185137] cfg80211: World regulatory domain updated:
[ 6.185143] cfg80211: DFS Master region: unset
[ 6.185144] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 6.185147] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.185148] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.185150] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.185152] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 6.185154] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 6.185155] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 6.185157] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 6.185158] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 6.384133] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 6.384146] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 6.384149] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 6.384170] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[ 6.384174] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 324 MHz
[ 6.384177] nouveau [ CLK][0000:01:00.0] 0f: core 589 MHz shader 1402 MHz memory 400 MHz
[ 6.384199] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 6.386062] [TTM] Zone kernel: Available graphics memory: 2028830 kiB
[ 6.386064] [TTM] Initializing pool allocator
[ 6.386069] [TTM] Initializing DMA pool allocator
[ 6.386082] nouveau [ DRM] VRAM: 512 MiB
[ 6.386083] nouveau [ DRM] GART: 1048576 MiB
[ 6.386087] nouveau [ DRM] TMDS table version 2.0
[ 6.386089] nouveau [ DRM] DCB version 4.0
[ 6.386092] nouveau [ DRM] DCB outp 00: 02000300 00000000
[ 6.386094] nouveau [ DRM] DCB outp 01: 01000302 00020030
[ 6.386095] nouveau [ DRM] DCB outp 02: 02011362 00020010
[ 6.386097] nouveau [ DRM] DCB outp 03: 01022310 00000000
[ 6.386099] nouveau [ DRM] DCB conn 00: 00001030
[ 6.386101] nouveau [ DRM] DCB conn 01: 00002161
[ 6.386102] nouveau [ DRM] DCB conn 02: 00000200
[ 6.394000] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.394002] [drm] Driver supports precise vblank timestamp query.
[ 6.405264] nouveau [ DRM] MM: using COPY for buffer copies
[ 6.467583] nouveau [ DRM] allocated 1920x1080 fb: 0x70000, bo ffff88013ab3ac00
[ 6.467826] fbcon: nouveaufb (fb0) is primary device
[ 6.497880] r8169 0000:02:00.0 eth0: link down
[ 6.498053] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.539069] Console: switching to colour frame buffer device 240x67
[ 6.542178] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 6.542180] nouveau 0000:01:00.0: registered panic notifier
[ 6.548048] [drm] Initialized nouveau 1.1.2 20120801 for 0000:01:00.0 on minor 0
[ 7.888048] floppy0: no floppy controllers found
[ 7.888063] work still pending
[ 8.021747] r8169 0000:02:00.0 eth0: link up
[ 8.021756] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: GA-MA770-UD3
product_version:
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version:
bios_vendor: Award Software International, Inc.
bios_version: FKd
board_vendor: Gigabyte Technology Co., Ltd.
board_name: GA-MA770-UD3
board_version: x.x
** Loaded modules:
cfg80211
rfkill
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
snd_hda_codec_hdmi
edac_mce_amd
powernow_k8
kvm_amd
kvm
snd_ice1712
snd_cs8427
snd_i2c
serio_raw
snd_ice17xx_ak4xxx
pcspkr
snd_ak4xxx_adda
k8temp
snd_mpu401_uart
snd_rawmidi
edac_core
snd_seq_device
snd_ac97_codec
ac97_bus
joydev
evdev
sp5100_tco
i2c_piix4
nouveau
mxm_wmi
snd_hda_intel
video
snd_hda_controller
ttm
snd_hda_codec
snd_hwdep
drm_kms_helper
drm
snd_pcm
snd_timer
i2c_algo_bit
snd
i2c_core
soundcore
wmi
shpchp
button
fuse
processor
thermal_sys
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
dm_mod
hid_generic
usbhid
hid
sr_mod
cdrom
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
ata_generic
ohci_pci
firewire_ohci
firewire_core
crc_itu_t
r8169
pata_atiixp
mii
ahci
libahci
libata
scsi_mod
ehci_pci
ohci_hcd
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RX790 Host Bridge [1002:5957]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RX790 Host Bridge [1002:5957]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 32
Region 3: Memory at <ignored> (64-bit, non-prefetchable)
Capabilities: <access denied>
00:02.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RX780/RD790 PCI to PCI bridge (external gfx0 port A) [1002:5978] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fb000000-fcffffff
Prefetchable memory behind bridge: 00000000c0000000-00000000dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:0a.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RD790 PCI to PCI bridge (PCI express gpp port F) [1002:597f] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fdf00000-fdffffff
Prefetchable memory behind bridge: 00000000fdc00000-00000000fdcfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b002]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: I/O ports at ff00 [size=8]
Region 1: I/O ports at fe00 [size=4]
Region 2: I/O ports at fd00 [size=8]
Region 3: I/O ports at fc00 [size=4]
Region 4: I/O ports at fb00 [size=16]
Region 5: Memory at fe02f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at fe02c000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0 USB OHCI1 Controller [1002:4398] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 3c)
Subsystem: Gigabyte Technology Co., Ltd GA-MA770-DS3rev2.0 Motherboard [1458:4385]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 IDE Controller [1002:439c] (prog-if 8a [Master SecP PriP])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5002]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at fa00 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_atiixp
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: fde00000-fdefffff
Prefetchable memory behind bridge: fdd00000-fddfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5004]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 18
Region 0: Memory at fe028000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GT218 [GeForce 210] [10de:0a65] (rev a2) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:8343]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at de000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at ef00 [size=128]
[virtual] Expansion ROM at fc000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
01:00.1 Audio device [0403]: NVIDIA Corporation High Definition Audio Controller [10de:0be3] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device [1043:8343]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 19
Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 02)
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 42
Region 0: I/O ports at de00 [size=256]
Region 2: Memory at fdcff000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at fdce0000 (64-bit, prefetchable) [size=64K]
[virtual] Expansion ROM at fdf00000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:07.0 Multimedia audio controller [0401]: VIA Technologies Inc. ICE1712 [Envy24] PCI Multi-Channel I/O Controller [1412:1712] (rev 02)
Subsystem: VIA Technologies Inc. M-Audio Delta Audiophile 2496 [1412:d634]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32
Interrupt: pin A routed to IRQ 21
Region 0: I/O ports at cf00 [size=32]
Region 1: I/O ports at ce00 [size=16]
Region 2: I/O ports at cd00 [size=16]
Region 3: I/O ports at cc00 [size=64]
Capabilities: <access denied>
Kernel driver in use: snd_ice1712
03:0e.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB23 IEEE-1394a-2000 Controller (PHY/Link) [104c:8024] (prog-if 10 [OHCI])
Subsystem: Gigabyte Technology Co., Ltd Motherboard [1458:1000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at fdeff000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at fdef8000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 005: ID 04f3:0a11 Elan Microelectronics Corp.
Bus 001 Device 004: ID 0566:3108 Monterey International Corp.
Bus 001 Device 003: ID 0458:002e KYE Systems Corp. (Mouse Systems)
Bus 001 Device 002: ID 0566:3021 Monterey International Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.0
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
Reply to: