Package: src:linux Version: 3.16.7-ckt9-3 Severity: important Hello, this bug already exited several kernel versions ago and is still present (amd46 and i386): >From time to time kswapd starts and is then using 100% I/O and mostly as much CPU. The first thing that's strange is the moment it starts. There might be enough memory free. Swappiness didn't change anything. The behavior is pretty erratic and I wasn't able to trigger the swapping process intentionally (at least while having enough free memory). The second - and most important thing - is: There is no swap space active! So kswapd shouln't be working at all. Still it does. It doesn't matter whether swap was deactivated temporarily using the swapoff command or never activated at all. In extreme cases kswapd can lock up the whole system for hours, thus making a hard reset necessary. I noticed that at least on some affected systems it seems that a (actually existing) swap partition is being recognized during the boot process although linux is not supposed to use this partition and "swapon -s" also shows it not being in use (no output). The bug mentioned here (from 2013) seems to be the same: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1185172 Activating a swap space prevents the system from locking up, since an actual swapping process is taking place then. -- Package-specific info: ** Version: Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt9-2 (2015-04-13) ** Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=996785e5-024b-4886-a397-bfd596068744 ro quiet ** Tainted: O (4096) * Out-of-tree module has been loaded. ** Kernel log: [ 32.103185] vboxdrv: fAsync=0 offMin=0x6e7 offMax=0x2c01 [ 32.103578] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'. [ 32.103586] vboxdrv: Successfully loaded version 4.3.18_Debian (interface 0x001a0008). [ 33.245376] vboxpci: IOMMU not found (not registered) [ 33.945453] ACPI Error: Field [B128] at 1152 exceeds Buffer [NULL] size 160 (bits) (20140424/dsopcode-236) [ 33.945483] ACPI Error: Method parse/execution failed [\_SB_.WMID.HWCD] (Node ffff8801060585e0), AE_AML_BUFFER_LIMIT (20140424/psparse-536) [ 33.945520] ACPI Error: Method parse/execution failed [\_SB_.WMID.WMAD] (Node ffff880106058f40), AE_AML_BUFFER_LIMIT (20140424/psparse-536) [ 34.167467] r8169 0000:06:00.0: firmware: direct-loading firmware rtl_nic/rtl8105e-1.fw [ 34.354944] r8169 0000:06:00.0 eth0: link down [ 34.355061] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 34.380441] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 37.550609] wlan0: authenticate with c8:d3:a3:06:92:2c [ 37.557352] wlan0: send auth to c8:d3:a3:06:92:2c (try 1/3) [ 37.559178] wlan0: authenticated [ 37.560154] wlan0: associate with c8:d3:a3:06:92:2c (try 1/3) [ 37.564199] wlan0: RX AssocResp from c8:d3:a3:06:92:2c (capab=0xc31 status=0 aid=2) [ 37.564322] wlan0: associated [ 37.564406] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 38.505516] IPv6: wlan0: IPv6 duplicate address fe80::76de:2bff:fe9e:b004 detected! [ 98.989012] Bluetooth: RFCOMM TTY layer initialized [ 98.989042] Bluetooth: RFCOMM socket layer initialized [ 98.989062] Bluetooth: RFCOMM ver 1.11 [ 779.122996] cfg80211: Calling CRDA to update world regulatory domain [ 779.131509] cfg80211: World regulatory domain updated: [ 779.131520] cfg80211: DFS Master region: unset [ 779.131524] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 779.131530] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 779.131534] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 779.131538] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 779.131543] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 779.131547] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 779.131551] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 779.131555] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 779.131559] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 780.161310] wlan0: authenticate with c8:d3:a3:06:92:2c [ 780.168027] wlan0: send auth to c8:d3:a3:06:92:2c (try 1/3) [ 780.169787] wlan0: authenticated [ 780.170710] wlan0: associate with c8:d3:a3:06:92:2c (try 1/3) [ 780.174531] wlan0: RX AssocResp from c8:d3:a3:06:92:2c (capab=0xc31 status=0 aid=1) [ 780.174837] wlan0: associated [ 1244.989011] wlan0: deauthenticating from c8:d3:a3:06:92:2c by local choice (Reason: 3=DEAUTH_LEAVING) [ 1245.011180] cfg80211: Calling CRDA to update world regulatory domain [ 1245.030676] cfg80211: World regulatory domain updated: [ 1245.030687] cfg80211: DFS Master region: unset [ 1245.030691] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 1245.030697] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1245.030701] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 1245.030705] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 1245.030710] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 1245.030715] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 1245.030719] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 1245.030723] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 1245.030727] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 1456.801788] capability: warning: `VBoxHeadless' uses 32-bit capabilities (legacy support in use) [ 1458.946485] device vboxnet1 entered promiscuous mode [ 1679.167587] wlan0: authenticate with c8:d3:a3:06:92:2c [ 1679.174645] wlan0: send auth to c8:d3:a3:06:92:2c (try 1/3) [ 1679.176396] wlan0: authenticated [ 1679.178349] wlan0: associate with c8:d3:a3:06:92:2c (try 1/3) [ 1679.182411] wlan0: RX AssocResp from c8:d3:a3:06:92:2c (capab=0xc31 status=0 aid=1) [ 1679.182495] wlan0: associated [ 1679.182551] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 1680.956258] IPv6: wlan0: IPv6 duplicate address fe80::76de:2bff:fe9e:b004 detected! [ 2934.923981] perf interrupt took too long (2523 > 2500), lowering kernel.perf_event_max_sample_rate to 50000 [ 3632.415484] cfg80211: Calling CRDA to update world regulatory domain [ 3632.909475] cfg80211: World regulatory domain updated: [ 3632.909494] cfg80211: DFS Master region: unset [ 3632.909499] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time) [ 3632.909510] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3632.909518] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A) [ 3632.909526] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A) [ 3632.909536] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A) [ 3632.909545] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s) [ 3632.909553] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s) [ 3632.909561] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A) [ 3632.909569] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A) [ 3639.423793] wlan0: authenticate with c8:d3:a3:06:92:2c [ 3639.440134] wlan0: send auth to c8:d3:a3:06:92:2c (try 1/3) [ 3639.444201] wlan0: authenticated [ 3639.448121] wlan0: associate with c8:d3:a3:06:92:2c (try 1/3) [ 3639.451940] wlan0: RX AssocResp from c8:d3:a3:06:92:2c (capab=0xc31 status=0 aid=1) [ 3639.452074] wlan0: associated [ 5464.967123] hrtimer: interrupt took 36028 ns [ 5857.442645] device-mapper: uevent: version 1.0.3 [ 5857.442925] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com [ 5863.419867] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled [ 5863.434528] JFS: nTxBlock = 8192, nTxLock = 65536 [ 5863.552787] ntfs: driver 2.1.30 [Flags: R/W MODULE]. [ 5863.622383] QNX4 filesystem 0.2.3 registered. [ 5863.726267] raid6: sse2x1 1066 MB/s [ 5863.794307] raid6: sse2x2 1253 MB/s [ 5863.862275] raid6: sse2x4 1777 MB/s [ 5863.862281] raid6: using algorithm sse2x4 (1777 MB/s) [ 5863.862286] raid6: using ssse3x2 recovery algorithm [ 5863.865138] xor: measuring software checksum speed [ 5863.902286] prefetch64-sse: 2698.000 MB/sec [ 5863.942276] generic_sse: 2541.000 MB/sec [ 5863.942282] xor: using function: prefetch64-sse (2698.000 MB/sec) [ 5863.980719] Btrfs loaded [ 5886.369527] cgroup: new mount options do not match the existing superblock, will be ignored ** Model information sys_vendor: Hewlett-Packard product_name: HP 635 Notebook PC product_version: 058A100000004C10002600000 chassis_vendor: Hewlett-Packard chassis_version: Chassis Version bios_vendor: Hewlett-Packard bios_version: F.35 board_vendor: Hewlett-Packard board_name: 3577 board_version: 24.38 ** Loaded modules: btrfs xor raid6_pq ufs qnx4 hfsplus hfs minix ntfs vfat msdos fat jfs xfs crc32c_generic libcrc32c dm_mod cpuid rfcomm cbc ctr ccm pci_stub vboxpci(O) vboxnetadp(O) vboxnetflt(O) vboxdrv(O) bnep cpufreq_userspace cpufreq_powersave cpufreq_stats cpufreq_conservative nfsd auth_rpcgss oid_registry nfs_acl nfs lockd fscache sunrpc ecb uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core v4l2_common videodev media ath3k btusb bluetooth 6lowpan_iphc joydev snd_hda_codec_realtek rtsx_pci_sdmmc ohci_pci snd_hda_codec_hdmi snd_hda_codec_generic rtsx_pci_ms memstick hp_wmi sparse_keymap mmc_core arc4 ath9k kvm_amd ath9k_common kvm ath9k_hw ath mac80211 pcspkr ehci_pci cfg80211 psmouse ohci_hcd snd_hda_intel evdev ehci_hcd snd_hda_controller rfkill serio_raw k10temp sr_mod snd_hda_codec radeon usbcore cdrom snd_hwdep r8169 usb_common rtsx_pci mfd_core sp5100_tco i2c_piix4 sg wmi snd_pcm mii shpchp snd_timer ttm drm_kms_helper snd soundcore battery drm i2c_algo_bit i2c_core video ac button acpi_cpufreq processor loop fuse ecryptfs autofs4 ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_generic crct10dif_common ahci libahci libata scsi_mod thermal thermal_sys ** PCI devices: 00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex [1022:1510] Subsystem: Advanced Micro Devices, Inc. [AMD] Family 14h Processor Root Complex [1022:1510] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32 00:01.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler [Radeon HD 6320] [1002:9806] (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 45 Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M] Region 1: I/O ports at 4000 [size=256] Region 2: Memory at f0400000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at <unassigned> [disabled] Capabilities: <access denied> Kernel driver in use: radeon 00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Wrestler HDMI Audio [1002:1314] Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 46 Region 0: Memory at f0444000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:11.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode] [1002:4391] (prog-if 01 [AHCI 1.0]) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 19 Region 0: I/O ports at 4118 [size=8] Region 1: I/O ports at 4124 [size=4] Region 2: I/O ports at 4110 [size=8] Region 3: I/O ports at 4120 [size=4] Region 4: I/O ports at 4100 [size=16] Region 5: Memory at f044d000 (32-bit, non-prefetchable) [size=1K] Capabilities: <access denied> Kernel driver in use: ahci 00:12.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f044c000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f044b000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 42) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Kernel driver in use: piix4_smbus 00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383] (rev 40) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 16 Region 0: Memory at f0440000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 LPC host controller [1002:439d] (rev 40) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (rev 40) (prog-if 01 [Subtractive decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- 00:14.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI2 Controller [1002:4399] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin C routed to IRQ 18 Region 0: Memory at f044a000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:15.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0) [1002:43a0] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=02, subordinate=05, sec-latency=0 I/O behind bridge: 00003000-00003fff Memory behind bridge: f0300000-f03fffff Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:15.1 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB700/SB800/SB900 PCI to PCI bridge (PCIE port 1) [1002:43a1] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=06, subordinate=06, sec-latency=0 I/O behind bridge: 00002000-00002fff Prefetchable memory behind bridge: 00000000f0100000-00000000f01fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:15.3 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SB900 PCI to PCI bridge (PCIE port 3) [1002:43a3] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Bus: primary=00, secondary=07, subordinate=07, sec-latency=0 Memory behind bridge: f0200000-f02fffff Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR- BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- Capabilities: <access denied> Kernel driver in use: pcieport 00:16.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB OHCI0 Controller [1002:4397] (prog-if 10 [OHCI]) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 18 Region 0: Memory at f0449000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:16.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB7x0/SB8x0/SB9x0 USB EHCI Controller [1002:4396] (prog-if 20 [EHCI]) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 32, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 17 Region 0: Memory at f0448000 (32-bit, non-prefetchable) [size=256] Capabilities: <access denied> Kernel driver in use: ehci-pci 00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 0 [1022:1700] (rev 43) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 1 [1022:1701] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 2 [1022:1702] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 3 [1022:1703] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: <access denied> Kernel driver in use: k10temp 00:18.4 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 4 [1022:1704] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.5 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 6 [1022:1718] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.6 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 5 [1022:1716] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 00:18.7 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] Family 12h/14h Processor Function 7 [1022:1719] Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- 02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 43 Region 0: Memory at f0300000 (32-bit, non-prefetchable) [size=4K] Capabilities: <access denied> Kernel driver in use: rtsx_pci 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) Subsystem: Hewlett-Packard Company Device [103c:3577] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 44 Region 0: I/O ports at 2000 [size=256] Region 2: Memory at f0104000 (64-bit, prefetchable) [size=4K] Region 4: Memory at f0100000 (64-bit, prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: r8169 07:00.0 Network controller [0280]: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) [168c:002b] (rev 01) Subsystem: Hewlett-Packard Company Device [103c:1461] Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin A routed to IRQ 23 Region 0: Memory at f0200000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: ath9k ** USB devices: Bus 002 Device 002: ID 05c8:021e Cheng Uei Precision Industry Co., Ltd (Foxlink) Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub -- System Information: Debian Release: 8.0 APT prefers testing APT policy: (990, 'testing'), (500, 'testing-updates'), (500, 'stable-updates'), (500, 'stable') Architecture: amd64 (x86_64) Foreign Architectures: i386 Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores) Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash Init: systemd (via /run/systemd/system) Versions of packages linux-image-3.16.0-4-amd64 depends on: ii debconf [debconf-2.0] 1.5.56 ii initramfs-tools [linux-initramfs-tool] 0.120 ii kmod 20-1 ii linux-base 3.5 ii module-init-tools 20-1 Versions of packages linux-image-3.16.0-4-amd64 recommends: ii firmware-linux-free 3.3 ii irqbalance 1.0.6-3 Versions of packages linux-image-3.16.0-4-amd64 suggests: pn debian-kernel-handbook <none> ii grub-pc 2.02~beta2-22 pn linux-doc-3.16 <none> Versions of packages linux-image-3.16.0-4-amd64 is related to: ii firmware-atheros 0.43 pn firmware-bnx2 <none> pn firmware-bnx2x <none> pn firmware-brcm80211 <none> pn firmware-intelwimax <none> pn firmware-ipw2x00 <none> pn firmware-ivtv <none> pn firmware-iwlwifi <none> pn firmware-libertas <none> ii firmware-linux 0.43 ii firmware-linux-nonfree 0.43 pn firmware-myricom <none> pn firmware-netxen <none> pn firmware-qlogic <none> pn firmware-ralink <none> ii firmware-realtek 0.43 pn xen-hypervisor <none> -- debconf information: linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64: linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
Attachment:
kswapd_io_cut.png
Description: PNG image
Attachment:
kswapd cpu (even with free memory).png
Description: PNG image