Package: src:linux
Version: 3.2.65-1+deb7u2
Severity: normal
I use rsnapshot to make hourly backups of an lvm2 volume using cron. rsnapshot has an interface for lvm
whereby it creates an lvm snapshot and uses that to create the backup. At the start of each backup this
volume is created and mounted, then unmounted and removed at the end of the job. Occassaionally umount
fails to unmount the snapshot volume properly. The volume doesn't appear when I run the mount command,
but when rsnapshot runs lvremove, it's unable to remove the volume because apparently the filesystem is
busy (I've tried doing the same manually, but the outcome is the same).
I've run lsof to determine what's using the volume, but nothing is returned.
Once this has happened, I can no longer reboot the machine using the reboot command in the terminal. I
have to either use the magic SysRq method or go in and hold down the power button to force a shut down.
I assume this a problem with the umount code provided by the kernel, but if I'm wrong and it's an issue
with lvm or rsnapshot do let me know and I'll submit the bug there.
Thanks,
Matt
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (
debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1+deb7u2
** Command line:
BOOT_IMAGE=/vmlinuz-3.2.0-4-amd64 root=/dev/mapper/luwin-root ro quiet
** Not tainted
** Syslog:
Apr 20 18:05:33 luwin kernel: [128097.042013] BUG: unable to handle kernel paging request at ffffbfffffffffff
Apr 20 18:05:33 luwin kernel: [128097.042088] IP: [<ffffffff8110db0d>] posix_acl_release+0x5/0x17
Apr 20 18:05:33 luwin kernel: [128097.042145] PGD 0
Apr 20 18:05:33 luwin kernel: [128097.042167] Oops: 0002 [#1] SMP
Apr 20 18:05:33 luwin kernel: [128097.042200] CPU 0
Apr 20 18:05:33 luwin kernel: [128097.042217] Modules linked in:
dm_snapshot ppdev lp bnep rfcomm bluetooth rfkill binfmt_misc nfsd nfs
nfs_acl auth_rpcgss fscache lock
d sunrpc ip6t_LOG xt_hl ip6t_rt nf_conntrack_ipv6 nf_defrag_ipv6
ipt_REJECT ipt_LOG xt_limit xt_tcpudp xt_addrtype xt_state
ip6table_filter ip6_tables nf_conntrack_netb
ios_ns nf_conntrack_broadcast nf_nat_ftp nf_nat nf_conntrack_ipv4
nf_defrag_ipv4 nf_conntrack_ftp nf_conntrack iptable_filter ip_tables
x_tables ext2 loop evdev snd_int
el8x0 snd_ac97_codec snd_pcm snd_page_alloc i915 video iTCO_wdt
iTCO_vendor_support button processor drm_kms_helper drm psmouse
serio_raw pcspkr parport_pc i2c_i801 i2c
_algo_bit snd_seq snd_seq_device snd_timer rng_core dcdbas snd parport
i2c_core thermal_sys soundcore ac97_bus ext4 crc16 jbd2 mbcache dm_mod
sg sd_mod crc_t10dif usb_s
torage ata_generic ata_piix libata uhci_hcd ehci_hcd scsi_mod usbcore tg3 libphy usb_common [last unloaded: scsi_wait_scan]
Apr 20 18:05:33 luwin kernel: [128097.043083]
Apr 20 18:05:33 luwin kernel: [128097.043100] Pid: 31757, comm: umount
Not tainted 3.2.0-4-amd64 #1 Debian 3.2.65-1+deb7u2 Dell Inc.
OptiPlex GX620 /0KH290
Apr 20 18:05:33 luwin kernel: [128097.043207] RIP:
0010:[<ffffffff8110db0d>] [<ffffffff8110db0d>]
posix_acl_release+0x5/0x17
Apr 20 18:05:33 luwin kernel: [128097.043275] RSP: 0018:ffff88005bcf3e30 EFLAGS: 00010286
Apr 20 18:05:33 luwin kernel: [128097.043317] RAX: ffffbffffffffffe RBX: ffff8800a4fc5558 RCX: 0000000000000034
Apr 20 18:05:33 luwin kernel: [128097.043372] RDX: 000000000000000b RSI: ffff8800a4fc55f0 RDI: ffffbfffffffffff
Apr 20 18:05:33 luwin kernel: [128097.043426] RBP: ffff88005bcf3e68 R08: 0000000000000025 R09: ffff8800a4fc5810
Apr 20 18:05:33 luwin kernel: [128097.043480] R10: ffff8800370d5c00 R11: ffff8800370d5c00 R12: ffff88006d2dfb28
Apr 20 18:05:33 luwin kernel: [128097.043534] R13: ffff8800a4bba0c0 R14: 0000000000000000 R15: 0000000000000000
Apr 20 18:05:33 luwin kernel: [128097.043590] FS: 00007f6bea5bb7e0(0000) GS:ffff8800df400000(0000) knlGS:0000000000000000
Apr 20 18:05:33 luwin kernel: [128097.043651] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Apr 20 18:05:33 luwin kernel: [128097.043696] CR2: ffffbfffffffffff CR3: 00000000a5297000 CR4: 00000000000006f0
Apr 20 18:05:33 luwin kernel: [128097.043751] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
Apr 20 18:05:33 luwin kernel: [128097.043806] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Apr 20 18:05:33 luwin kernel: [128097.043861] Process umount (pid: 31757, threadinfo ffff88005bcf2000, task ffff8800af258840)
Apr 20 18:05:33 luwin kernel: [128097.043923] Stack:
Apr 20 18:05:33 luwin kernel: [128097.043940] ffffffff8110dc42 ffff8800a4fc5558 ffffffff8110dc67 ffff88005bcf3e68
Apr 20 18:05:33 luwin kernel: [128097.044007] ffffffff8110e026 ffff8800a4bb9fc8 ffffffff8110e7e6 ffff8800a4fc52d8
Apr 20 18:05:33 luwin kernel: [128097.044010] ffff88006d2dfc10 ffffffffa0106030 ffff8800a4bba000 ffffffffa0106030
Apr 20 18:05:33 luwin kernel: [128097.044010] Call Trace:
Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff8110dc42>] ? __destroy_inode+0x45/0x4f
Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff8110dc67>] ? destroy_inode+0x1b/0x46
Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff8110e026>] ? dispose_list+0x27/0x31
Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff8110e7e6>] ? evict_inodes+0xdc/0xe7
Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff810fcadb>] ? generic_shutdown_super+0x3e/0xb4
Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff810fcb6f>] ? kill_block_super+0x1e/0x5f
Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff810fce12>] ? deactivate_locked_super+0x1b/0x4b
Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff81111e6e>] ? sys_umount+0x2d5/0x303
Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff8105636e>] ? set_current_blocked+0x2d/0x43
Apr 20 18:05:33 luwin kernel: [128097.044010] [<ffffffff81355f92>] ? system_call_fastpath+0x16/0x1b
Apr 20 18:05:33 luwin kernel: [128097.044010] Code: ff c0 be 00 02 00 00
4c 89 e7 48 63 d0 e8 38 a7 0a 00 3b 05 ea 27 58 00 7c d7 31 c0 85 db 0f
49 c3 5b 5d 41 5c c3 48 85 ff 74 11 <f0> ff 0f 0f 94 c0 84 c0 74
07 31 f6 e9 30 84 f8 ff c3 48 8b 47
Apr 20 18:05:33 luwin kernel: [128097.044010] RIP [<ffffffff8110db0d>] posix_acl_release+0x5/0x17
Apr 20 18:05:33 luwin kernel: [128097.044010] RSP <ffff88005bcf3e30>
Apr 20 18:05:33 luwin kernel: [128097.044010] CR2: ffffbfffffffffff
Apr 20 18:05:33 luwin kernel: [128097.044010] ---[ end trace 7b4057ce2f2a67e6 ]---
Apr 20 18:05:33 luwin rsnapshot[31770]: /usr/bin/rsnapshot -V hourly: ERROR: Unmount LVM snapshot failed: 35072
** Model information
sys_vendor: Dell Inc.
product_name: OptiPlex GX620
product_version:
chassis_vendor: Dell Inc.
chassis_version:
bios_vendor: Dell Inc.
bios_version: A06
board_vendor: Dell Inc.
board_name: 0KH290
board_version:
** Loaded modules:
ppdev
lp
bnep
rfcomm
bluetooth
rfkill
binfmt_misc
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
ip6t_LOG
xt_hl
ip6t_rt
nf_conntrack_ipv6
nf_defrag_ipv6
ipt_REJECT
ipt_LOG
xt_limit
xt_tcpudp
xt_addrtype
xt_state
ip6table_filter
ip6_tables
nf_conntrack_netbios_ns
nf_conntrack_broadcast
nf_nat_ftp
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_conntrack_ftp
nf_conntrack
iptable_filter
ip_tables
x_tables
ext2
loop
dm_snapshot
snd_intel8x0
snd_ac97_codec
snd_pcm
snd_page_alloc
snd_seq
snd_seq_device
snd_timer
i915
snd
soundcore
evdev
ac97_bus
iTCO_wdt
iTCO_vendor_support
video
drm_kms_helper
drm
i2c_algo_bit
i2c_i801
processor
psmouse
dcdbas
button
pcspkr
serio_raw
i2c_core
rng_core
parport_pc
parport
thermal_sys
ext4
crc16
jbd2
mbcache
dm_mod
sg
sd_mod
crc_t10dif
usb_storage
ata_generic
ata_piix
uhci_hcd
ehci_hcd
tg3
libata
usbcore
libphy
scsi_mod
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub [8086:2770] (rev 02)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:01.0 PCI bridge [0604]: Intel Corporation 82945G/GZ/P/PL PCI Express
Root Port [8086:2771] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Memory behind bridge: fe900000-fe9fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation 82945G/GZ
Integrated Graphics Controller [8086:2772] (rev 02) (prog-if 00 [VGA
controller])
Subsystem: Dell Device [1028:01ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at feb00000 (32-bit, non-prefetchable) [size=512K]
Region 1: I/O ports at e898 [size=8]
Region 2: Memory at e0000000 (32-bit, prefetchable) [size=256M]
Region 3: Memory at feac0000 (32-bit, non-prefetchable) [size=256K]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:02.1 Display controller [0380]: Intel Corporation 82945G/GZ Integrated Graphics Controller [8086:2776] (rev 02)
Subsystem: Dell Device [1028:01ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at feb80000 (32-bit, non-prefetchable) [size=512K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI
Express Port 1 [8086:27d0] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: fe800000-fe8fffff
Prefetchable memory behind bridge: 00000000f4200000-00000000f43fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation NM10/ICH7 Family PCI
Express Port 2 [8086:27d2] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00001000-00001fff
Memory behind bridge: fe700000-fe7fffff
Prefetchable memory behind bridge: 00000000f4000000-00000000f41fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #1 [8086:27c8] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 4: I/O ports at ff80 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #2 [8086:27c9] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 22
Region 4: I/O ports at ff60 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at ff40 [size=32]
Kernel driver in use: uhci_hcd
00:1d.3 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB
UHCI Controller #4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at ff20 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation NM10/ICH7 Family USB2 EHCI Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 21
Region 0: Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1e.2 Multimedia audio controller [0401]: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller [8086:27de] (rev 01)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: I/O ports at ec00 [size=256]
Region 1: I/O ports at e8c0 [size=64]
Region 2: Memory at feabfa00 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at feabf900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: snd_intel8x0
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge [8086:27b8] (rev 01)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801G (ICH7 Family) IDE
Controller [8086:27df] (rev 01) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Device [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation NM10/ICH7 Family SATA
Controller [IDE mode] [8086:27c0] (rev 01) (prog-if 8f [Master SecP SecO
PriP PriO])
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 20
Region 0: I/O ports at fe00 [size=8]
Region 1: I/O ports at fe10 [size=4]
Region 2: I/O ports at fe20 [size=8]
Region 3: I/O ports at fe30 [size=4]
Region 4: I/O ports at fea0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation NM10/ICH7 Family SMBus Controller [8086:27da] (rev 01)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at e8a0 [size=32]
Kernel driver in use: i801_smbus
02:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express [14e4:1677] (rev 01)
Subsystem: Dell OptiPlex GX620 [1028:01ad]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 002: ID 152d:2329 JMicron Technology Corp. / JMicron USA Technology Corp. JM20329 SATA Bridge
Bus 001 Device 003: ID 13fd:0840 Initio Corporation
-- System Information:
Debian Release: 7.8
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 1.99-27+deb7u2
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.36+wheezy.1
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64: