Bug#782058: Pegasos II: installer boots up to 'returning from prom_init'
Package: src:linux
Version: 3.16.7-ckt7-1
Severity: important
Tags: d-i jessie
The last line seen on the screen after installer CD boots is
'returning from prom_init'. This is a regression introduced in
d-i rc2 which persist in daily builds.
Connecting serial terminal and booting with 'console=ttyS0,9600' allows
successful installation of jessie. (with some hiccups that warrant a
separate bug report to mkvmlinuz).
I'm aware that fix for bug #748398 actually introduced this regression.
The radeonfb is currently compiled as module which is not included in the
installer. I hope that including the radeonfb module in the installer will fix
this issue.
This report was generated on the same machine after successful installation.
Could you please add radeonfb module to debian installer?
Milan
-- Package-specific info:
** Version:
Linux version 3.16.0-4-powerpc (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 Debian 3.16.7-ckt7-1 (2015-03-01)
** Command line:
root=/dev/sda2
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 9.107171] [drm] Connector 0:
[ 9.107180] [drm] VGA-1
[ 9.107193] [drm] DDC: 0x60 0x60 0x60 0x60 0x60 0x60 0x60 0x60
[ 9.107206] [drm] Encoders:
[ 9.107216] [drm] CRT1: INTERNAL_DAC1
[ 9.107227] [drm] Connector 1:
[ 9.107237] [drm] DVI-I-1
[ 9.107246] [drm] HPD1
[ 9.107258] [drm] DDC: 0x64 0x64 0x64 0x64 0x64 0x64 0x64 0x64
[ 9.107269] [drm] Encoders:
[ 9.107279] [drm] CRT2: INTERNAL_DAC2
[ 9.107290] [drm] DFP1: INTERNAL_TMDS1
[ 9.138249] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 9.222863] [drm] fb mappable at 0xC0040000
[ 9.222913] [drm] vram apper at 0xC0000000
[ 9.222924] [drm] size 5242880
[ 9.222934] [drm] fb depth is 24
[ 9.222944] [drm] pitch is 5120
[ 9.275221] Console: switching to colour frame buffer device 160x64
[ 9.316086] radeon 0001:01:08.0: fb0: radeondrmfb frame buffer device
[ 9.316398] radeon 0001:01:08.0: registered panic notifier
[ 9.320300] [drm] Initialized radeon 2.39.0 20080528 for 0001:01:08.0 on minor 0
[ 9.679644] Adding 3012180k swap on /dev/sda3. Priority:-1 extents:1 across:3012180k FS
[ 9.722815] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[ 9.732480] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 9.872623] snd_via82xx_modem: probe of 0000:00:0c.6 failed with error -13
[ 9.873912] snd_via82xx 0000:00:0c.5: enabling device (0000 -> 0001)
[ 10.234992] systemd-journald[133]: Received request to flush runtime journal from PID 1
[ 10.425400] via-rhine 0000:00:0d.0: enabling device (0000 -> 0003)
[ 10.460940] via-rhine 0000:00:0d.0 eth0: VIA Rhine II at 0xf1ffe900, 00:0b:2f:43:fb:04, IRQ 9
[ 10.462200] via-rhine 0000:00:0d.0 eth0: MII PHY found at address 16, status 0x786d advertising 01e1 Link c5e1
[ 10.480763] uhci_hcd 0000:00:0c.2: UHCI Host Controller
[ 10.481103] uhci_hcd 0000:00:0c.2: new USB bus registered, assigned bus number 1
[ 10.481482] uhci_hcd 0000:00:0c.2: detected 2 ports
[ 10.481768] uhci_hcd 0000:00:0c.2: irq 9, io base 0x00001040
[ 10.482306] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.482646] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.496172] usb usb1: Product: UHCI Host Controller
[ 10.509022] usb usb1: Manufacturer: Linux 3.16.0-4-powerpc uhci_hcd
[ 10.521857] usb usb1: SerialNumber: 0000:00:0c.2
[ 10.587163] hub 1-0:1.0: USB hub found
[ 10.587190] hub 1-0:1.0: 2 ports detected
[ 10.587827] ehci-pci 0000:00:05.2: EHCI Host Controller
[ 10.587850] ehci-pci 0000:00:05.2: new USB bus registered, assigned bus number 2
[ 10.588018] ehci-pci 0000:00:05.2: irq 9, io mem 0x80002800
[ 10.596335] ehci-pci 0000:00:05.2: USB 2.0 started, EHCI 1.00
[ 10.596575] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 10.596581] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.596585] usb usb2: Product: EHCI Host Controller
[ 10.596589] usb usb2: Manufacturer: Linux 3.16.0-4-powerpc ehci_hcd
[ 10.596593] usb usb2: SerialNumber: 0000:00:05.2
[ 10.597535] hub 2-0:1.0: USB hub found
[ 10.597685] hub 2-0:1.0: 5 ports detected
[ 10.598436] uhci_hcd 0000:00:0c.3: UHCI Host Controller
[ 10.598457] uhci_hcd 0000:00:0c.3: new USB bus registered, assigned bus number 3
[ 10.598473] uhci_hcd 0000:00:0c.3: detected 2 ports
[ 10.598522] uhci_hcd 0000:00:0c.3: irq 9, io base 0x00001060
[ 10.598731] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 10.598737] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 10.598741] usb usb3: Product: UHCI Host Controller
[ 10.598744] usb usb3: Manufacturer: Linux 3.16.0-4-powerpc uhci_hcd
[ 10.598748] usb usb3: SerialNumber: 0000:00:0c.3
[ 10.599440] hub 3-0:1.0: USB hub found
[ 10.599573] hub 3-0:1.0: 2 ports detected
[ 10.946096] ohci-pci: OHCI PCI platform driver
[ 11.024333] ohci-pci 0000:00:05.0: OHCI PCI host controller
[ 11.057487] ohci-pci 0000:00:05.0: new USB bus registered, assigned bus number 4
[ 11.076578] ohci-pci 0000:00:05.0: irq 9, io mem 0x80000000
[ 11.197044] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.210765] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.223754] usb usb4: Product: OHCI PCI host controller
[ 11.236424] usb usb4: Manufacturer: Linux 3.16.0-4-powerpc ohci_hcd
[ 11.249005] usb usb4: SerialNumber: 0000:00:05.0
[ 11.272345] usb 3-2: new low-speed USB device number 2 using uhci_hcd
[ 11.305384] hub 4-0:1.0: USB hub found
[ 11.305416] hub 4-0:1.0: 3 ports detected
[ 11.306008] ohci-pci 0000:00:05.1: OHCI PCI host controller
[ 11.306029] ohci-pci 0000:00:05.1: new USB bus registered, assigned bus number 5
[ 11.306123] ohci-pci 0000:00:05.1: irq 9, io mem 0x80001000
[ 11.423381] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 11.436711] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 11.449348] usb usb5: Product: OHCI PCI host controller
[ 11.461699] usb usb5: Manufacturer: Linux 3.16.0-4-powerpc ohci_hcd
[ 11.473937] usb usb5: SerialNumber: 0000:00:05.1
[ 11.499621] hub 5-0:1.0: USB hub found
[ 11.528390] hub 5-0:1.0: 2 ports detected
[ 11.642660] usb 3-2: New USB device found, idVendor=04b3, idProduct=310b
[ 11.655590] usb 3-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 11.840080] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.920773] usbcore: registered new interface driver usbhid
[ 11.933370] usbhid: USB HID core driver
[ 11.978062] input: HID 04b3:310b as /devices/pci0000:00/0000:00:0c.3/usb3/3-2/3-2:1.0/0003:04B3:310B.0001/input/input3
[ 12.003587] hid-generic 0003:04B3:310B.0001: input,hidraw0: USB HID v1.00 Mouse [HID 04b3:310b] on usb-0000:00:0c.3-2/input0
[ 13.872096] RPC: Registered named UNIX socket transport module.
[ 13.885387] RPC: Registered udp transport module.
[ 13.897995] RPC: Registered tcp transport module.
[ 13.910213] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.000017] FS-Cache: Loaded
[ 14.196497] FS-Cache: Netfs 'nfs' registered for caching
[ 14.335596] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
** Model information
revision : 1.1 (pvr 8002 0101)
platform : CHRP
model : Pegasos2
machine : CHRP Pegasos2
** Loaded modules:
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
hid_generic
usbhid
hid
ohci_pci
evdev
serio_raw
psmouse
radeon
ttm
drm_kms_helper
uhci_hcd
ehci_pci
drm
ohci_hcd
via_rhine
snd_via82xx
snd_via82xx_modem
ehci_hcd
snd_mpu401_uart
snd_rawmidi
snd_seq_device
snd_ac97_codec
usbcore
snd_pcm
mii
snd_timer
via_ircc
irda
firewire_ohci
firewire_core
usb_common
crc_itu_t
sr_mod
cdrom
snd
soundcore
ac97_bus
sg
vt8231
i2c_viapro
gameport
crc_ccitt
atkbd
libps2
i8042
serio
parport_pc
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
ata_generic
pata_via
** PCI devices:
0000:00:00.0 Host bridge [0600]: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller [11ab:6460] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 0
0000:00:01.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 46) (prog-if 10 [OHCI])
Subsystem: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (8000ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 80002000 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at 1080 [size=128]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0000:00:05.0 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 8 (250ns min, 10500ns max)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
0000:00:05.1 USB controller [0c03]: NEC Corporation OHCI USB Controller [1033:0035] (rev 43) (prog-if 10 [OHCI])
Subsystem: NEC Corporation USB Controller [1033:0035]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 8 (250ns min, 10500ns max)
Interrupt: pin B routed to IRQ 9
Region 0: Memory at 80001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: ohci-pci
0000:00:05.2 USB controller [0c03]: NEC Corporation uPD72010x USB 2.0 Controller [1033:00e0] (rev 04) (prog-if 20 [EHCI])
Subsystem: MosChip Semiconductor Technology Ltd. Device [9710:1906]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 68 (4000ns min, 8500ns max), Cache Line Size: 128 bytes
Interrupt: pin C routed to IRQ 9
Region 0: Memory at 80002800 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
0000:00:0c.0 ISA bridge [0601]: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] [1106:8231] (rev 10)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: parport_pc
0000:00:0c.1 IDE interface [0101]: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571] (rev 06) (prog-if 8a [Master SecP PriP])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin ? routed to IRQ 14
Region 0: [virtual] I/O ports at 1000 [size=8]
Region 1: [virtual] I/O ports at 100c [size=4]
Region 2: [virtual] I/O ports at 1010 [size=8]
Region 3: [virtual] I/O ports at 101c [size=4]
Region 4: I/O ports at 1020 [size=16]
Capabilities: <access denied>
Kernel driver in use: pata_via
0000:00:0c.2 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1e) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) VA-502 Mainboard [0925:1234]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
0000:00:0c.3 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 1e) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. (Wrong ID) VA-502 Mainboard [0925:1234]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 22
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
0000:00:0c.4 Bridge [0680]: VIA Technologies, Inc. VT8235 ACPI [1106:8235] (rev 10)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
0000:00:0c.5 Multimedia audio controller [0401]: VIA Technologies, Inc. VT82C686 AC97 Audio Controller [1106:3058] (rev 40)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at 1100 [size=256]
Region 1: I/O ports at 1030 [size=4]
Region 2: I/O ports at 1034 [size=4]
Capabilities: <access denied>
Kernel driver in use: snd_via82xx
0000:00:0c.6 Communication controller [0780]: VIA Technologies, Inc. AC'97 Modem Controller [1106:3068] (rev 20)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 9
Region 0: I/O ports at 1200 [size=256]
Capabilities: <access denied>
0000:00:0d.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6102 [Rhine-II] [1106:3065] (rev 51)
Subsystem: Device [3065:1106]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (63750ns min, 63750ns max)
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1300 [size=256]
Region 1: Memory at 80002900 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: via-rhine
0001:01:00.0 Host bridge [0600]: Marvell Technology Group Ltd. MV64360/64361/64362 System Controller [11ab:6460] (rev 03)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 128 bytes
Interrupt: pin A routed to IRQ 0
0001:01:08.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] [1002:5964] (rev 01) (prog-if 00 [VGA controller])
Subsystem: ABIT Computer Corp. R9200SE-DT [147b:6191]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0 (2000ns min)
Interrupt: pin A routed to IRQ 9
Region 0: Memory at c0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at 1000 [size=256]
Region 2: Memory at c8000000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at c8020000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
0001:01:08.1 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] RV280 [Radeon 9200 SE] (Secondary) [1002:5d44] (rev 01)
Subsystem: ABIT Computer Corp. R9200SE-DT (Secondary) [147b:6190]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at d0000000 (32-bit, prefetchable) [disabled] [size=128M]
Region 1: Memory at c8010000 (32-bit, non-prefetchable) [disabled] [size=64K]
Capabilities: <access denied>
** USB devices:
Bus 003 Device 002: ID 04b3:310b IBM Corp. Red Wheel Mouse
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing-updates
APT policy: (500, 'testing-updates'), (500, 'testing')
Architecture: powerpc (ppc)
Kernel: Linux 3.16.0-4-powerpc
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-powerpc depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.119
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-powerpc recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.16.0-4-powerpc suggests:
pn debian-kernel-handbook <none>
pn linux-doc-3.16 <none>
ii mkvmlinuz 36
Versions of packages linux-image-3.16.0-4-powerpc is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information excluded
Reply to: