Bug#779600: linux-image-3.16.0-4-686-pae: Linux console does not render the bold attribute correctly
Package: src:linux
Version: 3.16.7-ckt4-3
Severity: normal
Dear Maintainer,
I've noticed that with this kernel, "bold" does not work on my
console. For example, running "man man" to show the man(1) manpage
does not show headings in bold as it normally does.
(It also makes installed packages look very similar to uninstalled
packages in aptitude.)
-- Package-specific info:
** Version:
Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=/dev/mapper/Group1-ROOT ro
** Not tainted
** Kernel log:
[ 3.076607] hub 2-1:1.0: USB hub found
[ 3.076827] hub 2-1:1.0: 6 ports detected
[ 3.206681] EXT4-fs (dm-0): orphan cleanup on readonly fs
[ 3.206819] EXT4-fs (dm-0): 1 orphan inode deleted
[ 3.206907] EXT4-fs (dm-0): recovery complete
[ 3.256363] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 3.335775] Switched to clocksource tsc
[ 3.480403] scsi 6:0:0:0: Direct-Access Multi Flash Reader 1.00 PQ: 0 ANSI: 0
[ 3.480783] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 3.481701] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 3.863462] random: nonblocking pool is initialized
[ 4.844154] systemd-udevd[318]: starting version 215
[ 5.649388] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 5.649474] ACPI: Power Button [PWRB]
[ 5.649574] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 5.649654] ACPI: Power Button [PWRF]
[ 5.709993] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 5.725317] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[ 5.945763] cfg80211: Calling CRDA to update world regulatory domain
[ 5.959530] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 6.122326] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5392, rev 0223 detected
[ 6.125881] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5392 detected
[ 6.167961] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.207537] [drm] Initialized drm 1.1.0 20060810
[ 6.223863] alg: No test for crc32 (crc32-pclmul)
[ 6.321572] [drm] Memory usable by graphics device = 2048M
[ 6.321635] [drm] Replacing VGA console driver
[ 6.322117] Console: switching to colour dummy device 80x25
[ 6.342594] i915 0000:00:02.0: irq 47 for MSI/MSI-X
[ 6.342602] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 6.342606] [drm] Driver supports precise vblank timestamp query.
[ 6.342623] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.635836] iTCO_vendor_support: vendor-support=0
[ 6.636400] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.636425] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 6.636495] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.706130] fbcon: inteldrmfb (fb0) is primary device
[ 6.723634] Console: switching to colour frame buffer device 240x67
[ 6.728625] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.728650] i915 0000:00:02.0: registered panic notifier
[ 6.751184] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 6.751354] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 6.751436] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 6.751894] ACPI Warning: SystemIO range 0x0000f040-0x0000f05f conflicts with OpRegion 0x0000f040-0x0000f04f (\_SB_.PCI0.SBUS.SMBI)
[ 6.751921] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
[ 6.751944] (20140424/utaddress-258)
[ 6.751962] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.752137] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[ 6.790274] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 7.008090] sound hdaudioC1D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[ 7.008169] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 7.008228] sound hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 7.008283] sound hdaudioC1D0: mono: mono_out=0x0
[ 7.008328] sound hdaudioC1D0: inputs:
[ 7.008366] sound hdaudioC1D0: Front Mic=0x19
[ 7.008410] sound hdaudioC1D0: Rear Mic=0x18
[ 7.008452] sound hdaudioC1D0: Line=0x1a
[ 7.016992] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 7.018704] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 7.018819] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 7.018923] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 7.019026] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 7.802160] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 9.650664] EXT4-fs (dm-0): re-mounted. Opts: (null)
[ 9.964456] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 10.275801] lp: driver loaded but no devices found
[ 10.385473] ppdev: user-space parallel port driver
[ 10.577507] tun: Universal TUN/TAP device driver, 1.6
[ 10.577543] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 10.612385] it87: Found IT8728F chip at 0xa30, revision 2
[ 10.612434] it87: Beeping is supported
[ 10.655199] fuse init (API version 7.23)
[ 11.044430] device-mapper: thin: Data device (dm-3) discard unsupported: Disabling discard passdown.
[ 11.392560] Adding 4194300k swap on /dev/mapper/Group1-SWAP. Priority:-1 extents:1 across:4194300k FS
[ 13.292621] EXT4-fs (dm-7): mounting ext3 file system using the ext4 subsystem
[ 13.378291] EXT4-fs (dm-7): mounted filesystem with ordered data mode. Opts: (null)
[ 13.571364] EXT4-fs (dm-8): mounted filesystem with ordered data mode. Opts: (null)
[ 14.212168] Bridge firewalling registered
[ 14.215737] device eth0 entered promiscuous mode
[ 14.226738] r8169 0000:02:00.0: firmware: failed to load rtl_nic/rtl8168g-2.fw (-2)
[ 14.227961] r8169 0000:02:00.0: Direct firmware load failed with error -2
[ 14.229151] r8169 0000:02:00.0: Falling back to user helper
[ 14.230633] r8169 0000:02:00.0 eth0: unable to load firmware patch rtl_nic/rtl8168g-2.fw (-12)
[ 14.241807] r8169 0000:02:00.0 eth0: link down
[ 14.242973] r8169 0000:02:00.0 eth0: link down
[ 14.244108] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 14.245846] device tap0 entered promiscuous mode
[ 14.247460] IPv6: ADDRCONF(NETDEV_UP): tap0: link is not ready
[ 14.249570] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 15.871639] r8169 0000:02:00.0 eth0: link up
[ 15.875250] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 15.879536] br0: port 1(eth0) entered forwarding state
[ 15.883631] br0: port 1(eth0) entered forwarding state
[ 15.887747] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 22.408267] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.429266] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 22.451424] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 22.540617] nr_pdflush_threads exported in /proc is scheduled for removal
[ 22.540686] sysctl: The scan_unevictable_pages sysctl/node-interface has been disabled for lack of a legitimate use case. If you have one, please send an email to linux-mm@kvack.org.
[ 30.929666] br0: port 1(eth0) entered forwarding state
** Model information
not available
** Loaded modules:
cpufreq_stats
cpufreq_userspace
cpufreq_conservative
cpufreq_powersave
autofs4
binfmt_misc
xt_hl
ip6t_rt
xt_tcpudp
ipt_MASQUERADE
nf_nat_ftp
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
xt_TCPMSS
xt_LOG
ip6t_REJECT
ipt_REJECT
ip6table_mangle
iptable_mangle
xt_multiport
xt_state
xt_limit
xt_conntrack
nf_conntrack_ftp
nf_conntrack_ipv6
nf_defrag_ipv6
nf_conntrack
ip6table_filter
ip6_tables
iptable_filter
ip_tables
x_tables
bridge
stp
llc
dm_thin_pool
dm_persistent_data
dm_bio_prison
dm_bufio
libcrc32c
fuse
it87
hwmon_vid
tun
parport_pc
ppdev
lp
parport
snd_hda_codec_realtek
snd_hda_codec_generic
snd_hda_codec_hdmi
iTCO_wdt
iTCO_vendor_support
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
joydev
i2c_i801
snd_hda_intel
coretemp
snd_hda_controller
snd_hda_codec
kvm_intel
snd_hwdep
i915
snd_pcm_oss
snd_mixer_oss
kvm
snd_pcm
crc32_pclmul
drm_kms_helper
drm
evdev
snd_timer
arc4
rt2800pci
i2c_algo_bit
i2c_core
snd
rt2800mmio
rt2800lib
rt2x00pci
rt2x00mmio
rt2x00lib
eeprom_93cx6
mac80211
pcspkr
psmouse
cfg80211
serio_raw
crc_ccitt
rfkill
soundcore
mei_me
lpc_ich
mfd_core
mei
shpchp
battery
video
button
processor
hid_generic
usbhid
hid
ext4
crc16
mbcache
jbd2
usb_storage
dm_mod
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
sr_mod
cdrom
crc32c_intel
r8169
mii
fan
thermal
thermal_sys
ahci
libahci
xhci_hcd
ehci_pci
ehci_hcd
libata
scsi_mod
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0402] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at f7e14000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 05) (prog-if 30 [XHCI])
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f7e1e000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 05) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: df200000-df3fffff
Prefetchable memory behind bridge: 00000000df400000-00000000df5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #3 [8086:8c14] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7d00000-f7dfffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #5 [8086:8c18] (rev d5) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 05) (prog-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e1b000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation C220 Series Chipset Family H81 Express LPC Controller [8086:8c5c] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c02] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 45
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e1a000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 05)
Subsystem: Elitegroup Computer Systems Device [1019:7e68]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e19000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 0c)
Subsystem: Elitegroup Computer Systems Device [1019:8116]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: I/O ports at e000 [size=256]
Region 2: Memory at f7d00000 (64-bit, non-prefetchable) [size=4K]
Region 4: Memory at f0000000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Ralink corp. RT5392 PCIe Wireless Network Adapter [1814:5392]
Subsystem: Ralink corp. RT5392 PCIe Wireless Network Adapter [1814:5392]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7c00000 (32-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: rt2800pci
** USB devices:
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 003: ID 0e8f:0022 GreenAsia Inc.
Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 3.16.0-4-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: sysvinit (via /sbin/init)
Versions of packages linux-image-3.16.0-4-686-pae depends on:
ii debconf [debconf-2.0] 1.5.55
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-686-pae recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
ii libc6-i686 2.19-13
Versions of packages linux-image-3.16.0-4-686-pae suggests:
ii debian-kernel-handbook 1.0.15
ii grub-pc 2.02~beta2-20
ii linux-doc-3.16 3.16.7-ckt4-3
Versions of packages linux-image-3.16.0-4-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-686-pae/prerm/removing-running-kernel-3.16.0-4-686-pae: true
linux-image-3.16.0-4-686-pae/postinst/mips-initrd-3.16.0-4-686-pae:
linux-image-3.16.0-4-686-pae/postinst/depmod-error-initrd-3.16.0-4-686-pae: false
Reply to: