Bug#696223: linux-image-3.6-trunk-amd64: USB keyboard and mouse stop working
Package: src:linux
Version: 3.16.7-ckt2-1
Followup-For: Bug #696223
Dear Maintainer,
* What led up to the situation?
Upgrading system
* What exactly did you do (or not do) that was effective (or
ineffective)?
Boot into system
* What was the outcome of this action?
Keyboard and mice behind USB hub (HP Monitor) don't work after bootup
* What outcome did you expect instead?
Working keyboard and mice after booting
currently in Debian/testing I have trouble with my keyboard (Lenovo) and mice
(Lenovo) which don't respond to any input after some time when booting.
Until systemd switches from the kernel details output keyboard and mice work
but then they become unresponsive.
Only replugging keyboard and mice after XDM appears helps -- working then
again.
The Lenovo keyboard and Lenovo mice are connected behind a HP Compaq LA1952g
Monitor.
While replugging the devices I get the following kernel messages:
Jan 18 02:53:07 g6 kernel: [ 2661.078799] hid-generic 0003:04B3:3025.0005:
can't reset device, 0000:00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.079668] hid-generic 0003:17EF:601D.0004:
can't reset device, 0000:00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.082815] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.087041] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.087169] hid-generic 0003:04B3:3025.0005:
can't reset device, 0000:00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.091058] hid-generic 0003:17EF:601D.0004:
can't reset device, 0000:00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.091263] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.095391] hid-generic 0003:04B3:3025.0005:
can't reset device, 0000:00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.095670] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.099677] hid-generic 0003:17EF:601D.0004:
can't reset device, 0000:00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.099919] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.103940] hid-generic 0003:04B3:3025.0005:
can't reset device, 0000:00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.104175] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.108428] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.112192] hid-generic 0003:17EF:601D.0004:
can't reset device, 0000:00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.112438] hid-generic 0003:04B3:3025.0005:
can't reset device, 0000:00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.116188] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.120193] hid-generic 0003:17EF:601D.0004:
can't reset device, 0000:00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.120433] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.124434] hid-generic 0003:04B3:3025.0005:
can't reset device, 0000:00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.124657] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.128700] hid-generic 0003:17EF:601D.0004:
can't reset device, 0000:00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.128939] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.133193] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.135329] hid-generic 0003:04B3:3025.0005:
can't reset device, 0000:00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.137200] hid-generic 0003:17EF:601D.0004:
can't reset device, 0000:00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.139322] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.143300] hid-generic 0003:04B3:3025.0005:
can't reset device, 0000:00:1a.0-1.4.2/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.143562] usb 3-1.4: clear tt 1 (0070) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.147828] usb 3-1.4: clear tt 2 (0080) error
-71
Jan 18 02:53:07 g6 kernel: [ 2661.151716] hid-generic 0003:17EF:601D.0004:
can't reset device, 0000:00:1a.0-1.4.1/i
nput0, status -71
Jan 18 02:53:07 g6 kernel: [ 2661.151834] hid-generic 0003:04B3:3025.0005:
can't reset device, 0000:00:1a.0-1.4.2/i
nput0, status -71
:
Thank you.
With many greetings,
Adrian Immanuel KIESS
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-16) ) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=5a7bc907-35b2-4039-8928-50d6afad3863 ro splash vga=795 splash vga=775 resume=/dev/sdb2
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 2627.540839] tun: Universal TUN/TAP device driver, 1.6
[ 2627.540842] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 2627.598398] device virbr0-nic entered promiscuous mode
[ 2627.610312] virbr0: port 1(virbr0-nic) entered forwarding state
[ 2627.610324] virbr0: port 1(virbr0-nic) entered forwarding state
[ 2628.989953] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2629.937280] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2631.958649] virbr0: port 1(virbr0-nic) entered disabled state
[ 2650.185533] usb 3-1.5: USB disconnect, device number 5
[ 2650.896678] usb 3-1.5: new high-speed USB device number 9 using ehci-pci
[ 2650.990673] usb 3-1.5: New USB device found, idVendor=04a9, idProduct=1909
[ 2650.990680] usb 3-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2650.990684] usb 3-1.5: Product: CanoScan
[ 2650.990688] usb 3-1.5: Manufacturer: Canon
[ 2661.078799] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.079668] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.082815] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.087041] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.087169] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.091058] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.091263] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.095391] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.095670] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.099677] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.099919] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.103940] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.104175] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.108428] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.112192] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.112438] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.116188] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.120193] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.120433] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.124434] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.124657] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.128700] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.128939] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.133193] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.135329] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.137200] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.139322] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.143300] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.143562] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.147828] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.151716] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.151834] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.155677] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.159964] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.160216] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.163974] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.164215] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.168221] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.168467] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.172719] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.175234] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.176726] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.179231] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.183229] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.183471] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.187731] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.191740] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.191753] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.195737] usb 3-1.4: clear tt 1 (0070) error -71
[ 2661.199989] usb 3-1.4: clear tt 2 (0080) error -71
[ 2661.200161] usb 3-1.4: USB disconnect, device number 4
[ 2661.200168] usb 3-1.4.1: USB disconnect, device number 7
[ 2661.200234] hid-generic 0003:17EF:601D.0004: can't reset device, 0000:00:1a.0-1.4.1/input0, status -71
[ 2661.204114] hid-generic 0003:04B3:3025.0005: can't reset device, 0000:00:1a.0-1.4.2/input0, status -71
[ 2661.283326] usb 3-1.4.2: USB disconnect, device number 8
[ 2662.167488] usb 3-1.4: new high-speed USB device number 10 using ehci-pci
[ 2662.259796] usb 3-1.4: New USB device found, idVendor=03f0, idProduct=2824
[ 2662.259802] usb 3-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2662.260377] hub 3-1.4:1.0: USB hub found
[ 2662.260541] hub 3-1.4:1.0: 2 ports detected
[ 2662.531778] usb 3-1.4.1: new low-speed USB device number 11 using ehci-pci
[ 2662.628206] usb 3-1.4.1: New USB device found, idVendor=17ef, idProduct=601d
[ 2662.628212] usb 3-1.4.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2662.628216] usb 3-1.4.1: Product: Lenovo Laser Mouse
[ 2662.628220] usb 3-1.4.1: Manufacturer: Primax
[ 2662.631441] input: Primax Lenovo Laser Mouse as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.1/3-1.4.1:1.0/0003:17EF:601D.0006/input/input10
[ 2662.632690] hid-generic 0003:17EF:601D.0006: input,hidraw3: USB HID v1.11 Mouse [Primax Lenovo Laser Mouse] on usb-0000:00:1a.0-1.4.1/input0
[ 2662.719655] usb 3-1.4.2: new low-speed USB device number 12 using ehci-pci
[ 2662.818323] usb 3-1.4.2: New USB device found, idVendor=04b3, idProduct=3025
[ 2662.818330] usb 3-1.4.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2662.818334] usb 3-1.4.2: Product: USB NetVista Full Width Keyboard
[ 2662.818338] usb 3-1.4.2: Manufacturer: CHICONY
[ 2662.822051] input: CHICONY USB NetVista Full Width Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-1/3-1.4/3-1.4.2/3-1.4.2:1.0/0003:04B3:3025.0007/input/input11
[ 2662.822436] hid-generic 0003:04B3:3025.0007: input,hidraw4: USB HID v1.10 Keyboard [CHICONY USB NetVista Full Width Keyboard] on usb-0000:00:1a.0-1.4.2/input0
[ 2680.573985] ata1.00: failed to enable AA (error_mask=0x1)
[ 2680.574748] ata1.00: failed to enable AA (error_mask=0x1)
[ 2680.574755] ata1.00: configured for UDMA/100
[ 2680.574768] ata1: EH complete
[ 2680.584758] ata4.00: configured for UDMA/133
[ 2680.584764] ata4: EH complete
[ 2680.724969] ata2.00: configured for UDMA/133
[ 2680.724975] ata2: EH complete
[ 2718.056106] Bluetooth: RFCOMM TTY layer initialized
[ 2718.056126] Bluetooth: RFCOMM socket layer initialized
[ 2718.056134] Bluetooth: RFCOMM ver 1.11
[ 3287.509303] perf interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
** Model information
sys_vendor: HP
product_name: ProLiant ML110 G6
product_version:
chassis_vendor: HP
chassis_version: N/A
bios_vendor: HP
bios_version: O27
board_vendor: Wistron Corporation
board_name: ProLiant ML110 G6
board_version:
** Loaded modules:
rfcomm
xt_CHECKSUM
iptable_mangle
ipt_MASQUERADE
iptable_nat
nf_nat_ipv4
nf_nat
nf_conntrack_ipv4
nf_defrag_ipv4
xt_conntrack
nf_conntrack
ipt_REJECT
xt_tcpudp
iptable_filter
ip_tables
x_tables
tun
bridge
stp
llc
bnep
binfmt_misc
cfg80211
cpufreq_powersave
cpufreq_userspace
cpufreq_conservative
cpufreq_stats
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
deflate
ctr
twofish_generic
twofish_x86_64_3way
twofish_x86_64
twofish_common
camellia_generic
camellia_x86_64
serpent_sse2_x86_64
xts
serpent_generic
lrw
gf128mul
glue_helper
blowfish_generic
blowfish_x86_64
blowfish_common
cast5_generic
cast_common
ablk_helper
cryptd
des_generic
cbc
cmac
xcbc
rmd160
sha512_ssse3
sha512_generic
sha256_ssse3
sha256_generic
hmac
crypto_null
af_key
xfrm_algo
ir_lirc_codec
ir_mce_kbd_decoder
ir_jvc_decoder
ir_sanyo_decoder
lirc_dev
ir_sharp_decoder
ir_rc6_decoder
ir_sony_decoder
ir_rc5_decoder
ir_nec_decoder
rtl2832_sdr(C)
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
fc0013
dvb_usb_rtl28xxu
rtl2830
rtl2832
i2c_mux
dvb_usb_v2
dvb_core
rc_core
ecb
btusb
bluetooth
6lowpan_iphc
rfkill
snd_usb_audio
snd_usbmidi_lib
snd_hwdep
snd_rawmidi
snd_seq_device
snd_pcm
snd_timer
snd
soundcore
usblp
usb_storage
evdev
iTCO_wdt
iTCO_vendor_support
pcspkr
lpc_ich
mfd_core
kvm_intel
kvm
shpchp
tpm_tis
tpm
i2c_i801
button
acpi_cpufreq
processor
thermal_sys
cuse
coretemp
loop
ipmi_watchdog
ipmi_si
ipmi_poweroff
ipmi_devintf
ipmi_msghandler
fuse
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
btrfs
xor
raid6_pq
dm_mod
hid_generic
usbhid
hid
uhci_hcd
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
radeon
tg3
ehci_pci
crc32c_intel
ptp
pps_core
ahci
libphy
ehci_hcd
libahci
xhci_hcd
i2c_algo_bit
drm_kms_helper
libata
ttm
scsi_mod
usbcore
drm
usb_common
i2c_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Core Processor DMI [8086:d130] (rev 11)
Subsystem: Hewlett-Packard Company Device [103c:3318]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:03.0 PCI bridge [0604]: Intel Corporation Core Processor PCI Express Root Port 1 [8086:d138] (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d1900000-d19fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:08.0 System peripheral [0880]: Intel Corporation Core Processor System Management Registers [8086:d155] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.1 System peripheral [0880]: Intel Corporation Core Processor Semaphore and Scratchpad Registers [8086:d156] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.2 System peripheral [0880]: Intel Corporation Core Processor System Control and Status Registers [8086:d157] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:08.3 System peripheral [0880]: Intel Corporation Core Processor Miscellaneous Registers [8086:d158] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral [0880]: Intel Corporation Core Processor QPI Link [8086:d150] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral [0880]: Intel Corporation Core Processor QPI Routing and Protocol Registers [8086:d151] (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b3c] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3118]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1e02000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1c.0 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 [8086:3b42] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d1b00000-d1bfffff
Prefetchable memory behind bridge: 00000000d1c00000-00000000d1dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 [8086:3b44] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=1a, subordinate=1a, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d1f00000-d20fffff
Prefetchable memory behind bridge: 00000000d2100000-00000000d22fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 [8086:3b46] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=1c, subordinate=1c, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d1000000-d18fffff
Prefetchable memory behind bridge: 00000000d0000000-00000000d0ffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 [8086:3b48] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Bus: primary=00, secondary=1e, subordinate=1e, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d1a00000-d1afffff
Prefetchable memory behind bridge: 00000000d2300000-00000000d24fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.4 PCI bridge [0604]: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 [8086:3b4a] (rev 05) (prog-if 00 [Normal decode])
Physical Slot: 1
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00007000-00007fff
Memory behind bridge: d2500000-d26fffff
Prefetchable memory behind bridge: 00000000d2700000-00000000d28fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller [8086:3b34] (rev 05) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:3118]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d1e03000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=30, subordinate=30, sec-latency=32
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 3400 Series Chipset LPC Interface Controller [8086:3b14] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:3118]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller [8086:3b22] (rev 05) (prog-if 01 [AHCI 1.0])
Subsystem: Hewlett-Packard Company Device [103c:3118]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 44
Region 0: I/O ports at 1830 [size=8]
Region 1: I/O ports at 1824 [size=4]
Region 2: I/O ports at 1828 [size=8]
Region 3: I/O ports at 1820 [size=4]
Region 4: I/O ports at 1800 [size=32]
Region 5: Memory at d1e04000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller [8086:3b30] (rev 05)
Subsystem: Hewlett-Packard Company Device [103c:3318]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at d1e05000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 1840 [size=32]
Kernel driver in use: i801_smbus
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV516 GL [FireMV 2250] [1002:719b] (prog-if 00 [VGA controller])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:0602]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at d1900000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 2000 [size=256]
[virtual] Expansion ROM at d1920000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Display controller [0380]: Advanced Micro Devices, Inc. [AMD/ATI] RV516 GL [FireMV 2250] (Secondary) [1002:71bb]
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:0603]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Region 0: Memory at d1910000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
10:00.0 USB controller [0c03]: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015] (rev 02) (prog-if 30 [XHCI])
Subsystem: Renesas Technology Corp. uPD720202 USB 3.0 Host Controller [1912:0015]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d1b00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
1e:00.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5723 Gigabit Ethernet PCIe [14e4:165b] (rev 10)
Subsystem: Hewlett-Packard Company NC107i Integrated PCI Express Gigabit Server Adapter [103c:705d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 50
Region 0: Memory at d1a00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: tg3
** USB devices:
Bus 004 Device 004: ID 0a5c:21e8 Broadcom Corp. BCM20702A0 Bluetooth 4.0
Bus 004 Device 003: ID 0000:0000
Bus 004 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 003: ID 05e3:0612 Genesys Logic, Inc.
Bus 002 Device 004: ID 0bc2:3312 Seagate RSS LLC
Bus 002 Device 002: ID 05e3:0612 Genesys Logic, Inc.
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 1b80:d3a8 Afatech
Bus 001 Device 003: ID 05e3:0610 Genesys Logic, Inc. 4-port hub
Bus 001 Device 002: ID 05e3:0612 Genesys Logic, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 006: ID 04e8:3268 Samsung Electronics Co., Ltd ML-1610 Mono Laser Printer
Bus 003 Device 009: ID 04a9:1909 Canon, Inc. CanoScan LiDE 110
Bus 003 Device 012: ID 04b3:3025 IBM Corp. NetVista Full Width Keyboard
Bus 003 Device 011: ID 17ef:601d Lenovo
Bus 003 Device 010: ID 03f0:2824 Hewlett-Packard
Bus 003 Device 003: ID 0b05:1743 ASUSTek Computer, Inc. Xonar U1 Audio Station
Bus 003 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (900, 'testing'), (300, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.55
ii initramfs-tools [linux-initramfs-tool] 0.116
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
ii debian-kernel-handbook 1.0.15
ii extlinux 3:6.03+dfsg-4
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.43
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
Reply to: