Bug#775211: linux: Driver mv643xx_eth_port requests probe deferral
Control: found -1 3.16.7-ckt2-1
Control: notfound -1 3.16.0-4
On Mon, 2015-01-12 at 17:30 +0100, Draghi wrote:
> Source: linux
> Version: 3.16.0-4
FYI, this is the ABI not the package version. The version can be seen in
uname or in your kernel log in:
Linux version 3.16.0-4-kirkwood (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-16) ) #1 Debian 3.16.7-ckt2-1 (2014-12-08)
and is 3.16.7-ckt2-1, I've fixed the metadata.
> Severity: important
>
> I am using a QNAP TS-419P II. After upgrading from Wheezy, eth0 stopped working while eth1 still does.
> ethtool reports no link when plugging in the cable.
> This is partially similar to #719680
> For the complete log see: http://forum.qnap.com/viewtopic.php?p=454971
Attaching here so other people don't have to make a login.
Please can you also provide the output of "lsmod" and "ifconfig -a" on
the system along with the content of your /etc/network/interfaces.
What was the last working version?
http://snapshot.debian.org/package/linux/ has binaries for various
intermediate releases which you could use to try and narrow it down.
I'm running 3.16.7-ckt2-1 on my TS-419P (without the II, I think, it's
an older model anyhow) and both Ethernet ports are functional, I don't
know how different the II and the original are though, I thought not
much.
Can you put my mind at ease and double check the cabling please, perhaps
swap them over, perhaps the upgrade was just a coincidence... (unlikely
I think, but best to confirm).
Thanks,
Ian.
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-kirkwood (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-16) ) #1 Debian 3.16.7-ckt2-1 (2014-12-08)
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: QNAP TS-41x
[ 0.000000] Ignoring unrecognised tag 0x41000403
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c05e515c, node_mem_map dfbf9000
[ 0.000000] DMA zone: 1024 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 131072 pages, LIFO batch:31
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
[ 0.000000] Kernel command line: root=/dev/ram initrd=0xa00000,0x900000 ramdisk=34816
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 504148K/524288K available (3952K kernel code, 361K rwdata, 1452K rodata, 282K init, 293K bss, 20140K reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
.text : 0xc0008000 - 0xc054f50c (5406 kB)
.init : 0xc0550000 - 0xc0596864 ( 283 kB)
.data : 0xc0598000 - 0xc05f24b0 ( 362 kB)
.bss : 0xc05f24b0 - 0xc063baac ( 294 kB)
[ 0.000000] NR_IRQS:114
[ 0.000009] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 21474836475ns
[ 1.428450] Console: colour dummy device 80x30
[ 1.428715] console [tty0] enabled
[ 1.428736] Calibrating delay loop... 1974.27 BogoMIPS (lpj=3948544)
[ 1.444294] pid_max: default: 32768 minimum: 301
[ 1.444383] Security Framework initialized
[ 1.444436] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 1.444509] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.444538] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 1.445113] Initializing cgroup subsys memory
[ 1.445162] Initializing cgroup subsys devices
[ 1.445213] Initializing cgroup subsys freezer
[ 1.445244] Initializing cgroup subsys net_cls
[ 1.445287] Initializing cgroup subsys blkio
[ 1.445325] Initializing cgroup subsys perf_event
[ 1.445351] Initializing cgroup subsys net_prio
[ 1.445434] CPU: Testing write buffer coherency: ok
[ 1.445524] ftrace: allocating 16505 entries in 33 pages
[ 1.460723] Setting up static identity map for 0x3bcc20 - 0x3bcc78
[ 1.463137] devtmpfs: initialized
[ 1.465313] pinctrl core: initialized pinctrl subsystem
[ 1.465693] regulator-dummy: no parameters
[ 1.466045] NET: Registered protocol family 16
[ 1.466331] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 1.467234] cpuidle: using governor ladder
[ 1.467272] cpuidle: using governor menu
[ 1.467337] Kirkwood: MV88F6282-Rev-A1, TCLK=200000000.
[ 1.467365] Feroceon L2: Enabling L2
[ 1.467399] Feroceon L2: Cache support initialised.
[ 1.467876] initial MPP regs: 01112222 43303311 33330004 33003333 00000033 00000000 00000000
[ 1.467892] orion_mpp_conf: requested MPP7 config unavailable on this hardware
[ 1.467911] orion_mpp_conf: requested MPP49 config unavailable on this hardware
[ 1.467923] final MPP regs: 01112222 43303311 33330004 33003333 00000033 00000000 00000000
[ 1.498853] Kirkwood PCIe port 0: link up
[ 1.498869] Kirkwood PCIe port 1: link up
[ 1.498880] PCI: bus0 uses PCIe port 0
[ 1.499038] PCI host bridge to bus 0000:00
[ 1.499060] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xe7ffffff]
[ 1.499075] pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
[ 1.499088] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
[ 1.499119] pci 0000:00:00.0: [11ab:6282] type 00 class 0x058000
[ 1.499136] pci 0000:00:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[ 1.499146] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x1fffffff]
[ 1.499179] pci 0000:00:00.0: supports D1 D2
[ 1.499330] pci 0000:00:01.0: [11ab:7042] type 00 class 0x010000
[ 1.499356] pci 0000:00:01.0: reg 0x10: [mem 0x14000000-0x140fffff 64bit]
[ 1.499368] pci 0000:00:01.0: reg 0x18: [io 0x0000-0x00ff]
[ 1.499586] PCI: bus0: Fast back to back transfers disabled
[ 1.499605] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
[ 1.499614] PCI: bus1 uses PCIe port 1
[ 1.499765] PCI host bridge to bus 0000:01
[ 1.499784] pci_bus 0000:01: root bus resource [mem 0xe8000000-0xefffffff]
[ 1.499799] pci_bus 0000:01: root bus resource [io 0x10000-0x1ffff]
[ 1.499812] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
[ 1.499840] pci 0000:01:00.0: [11ab:6282] type 00 class 0x058000
[ 1.499855] pci 0000:01:00.0: reg 0x10: [mem 0xf1000000-0xf10fffff 64bit pref]
[ 1.499864] pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x1fffffff]
[ 1.499894] pci 0000:01:00.0: supports D1 D2
[ 1.500045] pci 0000:01:01.0: [1b6f:7023] type 00 class 0x0c0330
[ 1.500077] pci 0000:01:01.0: reg 0x10: [mem 0x98000000-0x98007fff 64bit]
[ 1.500200] pci 0000:01:01.0: supports D1 D2
[ 1.500207] pci 0000:01:01.0: PME# supported from D0 D1 D2 D3hot
[ 1.500408] PCI: bus1: Fast back to back transfers disabled
[ 1.500429] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.500457] pci 0000:01:01.0: BAR 0: assigned [mem 0xe8000000-0xe8007fff 64bit]
[ 1.500490] pci 0000:00:01.0: BAR 0: assigned [mem 0xe0000000-0xe00fffff 64bit]
[ 1.500515] pci 0000:00:01.0: BAR 2: assigned [io 0x1000-0x10ff]
[ 1.503649] Switched to clocksource orion_clocksource
[ 1.519263] NET: Registered protocol family 2
[ 1.519944] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.520013] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[ 1.520072] TCP: Hash tables configured (established 4096 bind 4096)
[ 1.520120] TCP: reno registered
[ 1.520133] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 1.520158] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 1.520309] NET: Registered protocol family 1
[ 1.520427] PCI: CLS 32 bytes, default 32
[ 1.520588] Unpacking initramfs...
[ 1.854327] Freeing initrd memory: 9216K (c0a00000 - c1300000)
[ 1.855304] futex hash table entries: 256 (order: -1, 3072 bytes)
[ 1.855386] audit: initializing netlink subsys (disabled)
[ 1.855448] audit: type=2000 audit(0.416:1): initialized
[ 1.856112] zbud: loaded
[ 1.856316] VFS: Disk quotas dquot_6.5.2
[ 1.856363] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.856443] jffs2: version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
[ 1.856596] msgmni has been set to 1002
[ 1.857972] alg: No test for stdrng (krng)
[ 1.858058] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 1.858217] io scheduler noop registered
[ 1.858329] io scheduler cfq registered (default)
[ 1.858747] mv_xor mv_xor.0: Marvell shared XOR driver
[ 1.875720] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 1.895716] mv_xor mv_xor.0: Marvell XOR: ( xor cpy )
[ 1.895847] mv_xor mv_xor.1: Marvell shared XOR driver
[ 1.915716] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 1.935716] mv_xor mv_xor.1: Marvell XOR: ( xor cpy )
[ 1.936027] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 1.956618] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33, base_baud = 12500000) is a 16550A
[ 1.976891] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34, base_baud = 12500000) is a 16550A
[ 1.978145] m25p80 spi0.0: m25p128 (16384 Kbytes)
[ 1.978167] Creating 6 MTD partitions on "spi_flash":
[ 1.978183] 0x000000000000-0x000000080000 : "U-Boot"
[ 1.979022] 0x000000200000-0x000000400000 : "Kernel"
[ 1.979838] 0x000000400000-0x000000d00000 : "RootFS1"
[ 1.980570] 0x000000d00000-0x000001000000 : "RootFS2"
[ 1.981306] 0x000000080000-0x0000000c0000 : "U-Boot Config"
[ 1.982061] 0x0000000c0000-0x000000200000 : "NAS Config"
[ 1.983136] mousedev: PS/2 mouse device common for all mice
[ 2.983679] rtc-mv rtc-mv: internal RTC not ticking
[ 2.983783] i2c /dev entries driver
[ 2.987545] rtc (null): invalid alarm value: 1900-1-11 23:21:0
[ 2.987760] rtc-s35390a 0-0030: rtc core: registered rtc-s35390a as rtc0
[ 2.988003] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.988167] TCP: cubic registered
[ 2.988189] NET: Registered protocol family 17
[ 2.988224] mpls_gso: MPLS GSO support
[ 2.988730] registered taskstats version 1
[ 2.990156] rtc-s35390a 0-0030: setting system clock to 2015-01-11 12:04:10 UTC (1420977850)
[ 2.990640] PM: Hibernation image not present or could not be loaded.
[ 2.991631] Freeing unused kernel memory: 280K (c0550000 - c0596000)
[ 3.140153] systemd-udevd[51]: starting version 215
[ 3.141580] random: systemd-udevd urandom read with 3 bits of entropy available
[ 3.186710] SCSI subsystem initialized
[ 3.224629] libata version 3.00 loaded.
[ 3.225941] sata_mv 0000:00:01.0: version 1.28
[ 3.226019] sata_mv 0000:00:01.0: enabling device (0140 -> 0143)
[ 3.226167] sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 3.259306] scsi0 : sata_mv
[ 3.268018] scsi1 : sata_mv
[ 3.277804] scsi2 : sata_mv
[ 3.288428] scsi3 : sata_mv
[ 3.288705] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 9
[ 3.288728] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 9
[ 3.288744] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 9
[ 3.288760] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 9
[ 3.288895] sata_mv sata_mv.0: version 1.28
[ 3.288948] sata_mv sata_mv.0: cannot get optional clkdev
[ 3.289051] sata_mv sata_mv.0: slots 32 ports 2
[ 3.297674] scsi4 : sata_mv
[ 3.305201] scsi5 : sata_mv
[ 3.305465] ata5: SATA max UDMA/133 irq 21
[ 3.305482] ata6: SATA max UDMA/133 irq 21
[ 3.623677] ata5: SATA link down (SStatus 0 SControl F300)
[ 3.767695] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.783715] ata1.00: ATA-8: ST3000VX000-9YW166, CV13, max UDMA/133
[ 3.783734] ata1.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 3.823715] ata1.00: configured for UDMA/133
[ 3.824000] scsi 0:0:0:0: Direct-Access ATA ST3000VX000-9YW1 CV13 PQ: 0 ANSI: 5
[ 4.299703] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.315715] ata2.00: ATA-8: ST3000VX000-1CU166, CV23, max UDMA/133
[ 4.315733] ata2.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.339715] ata2.00: configured for UDMA/133
[ 4.339964] scsi 1:0:0:0: Direct-Access ATA ST3000VX000-1CU1 CV23 PQ: 0 ANSI: 5
[ 4.815695] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.831718] ata3.00: ATA-8: ST3000VX000-9YW166, CV13, max UDMA/133
[ 4.831736] ata3.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 4.855719] ata3.00: configured for UDMA/133
[ 4.855960] scsi 2:0:0:0: Direct-Access ATA ST3000VX000-9YW1 CV13 PQ: 0 ANSI: 5
[ 10.371667] ata4: link is slow to respond, please be patient (ready=0)
[ 11.155691] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 11.171719] ata4.00: ATA-8: ST3000VX000-9YW166, CV13, max UDMA/133
[ 11.171737] ata4.00: 5860533168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 11.195720] ata4.00: configured for UDMA/133
[ 11.195971] scsi 3:0:0:0: Direct-Access ATA ST3000VX000-9YW1 CV13 PQ: 0 ANSI: 5
[ 11.515673] ata6: SATA link down (SStatus 0 SControl F300)
[ 11.543721] sd 0:0:0:0: [sda] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 11.543752] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 11.543982] sd 0:0:0:0: [sda] Write Protect is off
[ 11.544001] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.544087] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.545794] sd 1:0:0:0: [sdb] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 11.545822] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 11.546025] sd 1:0:0:0: [sdb] Write Protect is off
[ 11.546043] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 11.546127] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.547789] sd 2:0:0:0: [sdc] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 11.547817] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 11.548019] sd 2:0:0:0: [sdc] Write Protect is off
[ 11.548036] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 11.548119] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.549791] sd 3:0:0:0: [sdd] 5860533168 512-byte logical blocks: (3.00 TB/2.72 TiB)
[ 11.549819] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 11.550019] sd 3:0:0:0: [sdd] Write Protect is off
[ 11.550037] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 11.550121] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.588620] sdc: sdc1 sdc2 sdc3
[ 11.590082] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 11.594587] sda: sda1 sda2 sda3
[ 11.595863] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.598512] sdb: sdb1 sdb2 sdb3
[ 11.599774] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 11.604947] sdd: sdd1 sdd2 sdd3
[ 11.606202] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 11.895912] md: bind<sdc3>
[ 11.895998] random: nonblocking pool is initialized
[ 11.909088] md: bind<sda3>
[ 11.918604] md: bind<sdb3>
[ 11.928231] md: raid0 personality registered for level 0
[ 11.928781] md/raid0:md126: md_size is 11678597120 sectors.
[ 11.928803] md: RAID0 configuration for md126 - 1 zone
[ 11.928813] md: zone0=[sda3/sdb3]
[ 11.928828] zone-offset= 0KB, device-offset= 0KB, size=5839298560KB
[ 11.928882] md126: detected capacity change from 0 to 5979441725440
[ 11.934210] md126: unknown partition table
[ 11.970563] md: bind<sdd3>
[ 11.975732] md/raid0:md127: md_size is 11678597120 sectors.
[ 11.975760] md: RAID0 configuration for md127 - 1 zone
[ 11.975770] md: zone0=[sdc3/sdd3]
[ 11.975786] zone-offset= 0KB, device-offset= 0KB, size=5839298560KB
[ 11.975840] md127: detected capacity change from 0 to 5979441725440
[ 11.982278] md127: unknown partition table
[ 12.088103] raid6: int32x1 122 MB/s
[ 12.155920] raid6: int32x2 176 MB/s
[ 12.223655] raid6: int32x4 182 MB/s
[ 12.291771] raid6: int32x8 204 MB/s
[ 12.291784] raid6: using algorithm int32x8 (204 MB/s)
[ 12.291794] raid6: using intx1 recovery algorithm
[ 12.293040] xor: measuring software checksum speed
[ 12.331654] arm4regs : 1806.000 MB/sec
[ 12.371655] 8regs : 1085.000 MB/sec
[ 12.411655] 32regs : 1502.000 MB/sec
[ 12.411668] xor: using function: arm4regs (1806.000 MB/sec)
[ 12.443684] Btrfs loaded
[ 13.802172] BTRFS: device label Root devid 4 transid 9714 /dev/sda1
[ 13.803412] BTRFS: device label Root devid 1 transid 9714 /dev/sdb1
[ 13.804187] BTRFS: device label Root devid 2 transid 9714 /dev/sdc1
[ 13.805003] BTRFS: device label Root devid 3 transid 9714 /dev/sdd1
[ 13.821880] BTRFS info (device sdd1): disk space caching is enabled
[ 14.338233] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 14.338458] systemd[1]: Detected architecture 'arm'.
[ 14.457323] systemd[1]: Inserted module 'autofs4'
[ 14.475374] NET: Registered protocol family 10
[ 14.476082] systemd[1]: Inserted module 'ipv6'
[ 14.481527] systemd[1]: Set hostname to <Storage-Blue>.
[ 14.854900] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 14.857744] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 14.858079] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 14.858193] systemd[1]: Starting Remote File Systems (Pre).
[ 14.858460] systemd[1]: Reached target Remote File Systems (Pre).
[ 14.858631] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 14.859163] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 14.859293] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 14.859489] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 14.859577] systemd[1]: Expecting device dev-disk-by\x2dpartlabel-SwapD.device...
[ 14.859827] systemd[1]: Expecting device dev-mapper-SwapD.device...
[ 14.860023] systemd[1]: Expecting device dev-disk-by\x2dpartlabel-SwapC.device...
[ 14.860215] systemd[1]: Expecting device dev-mapper-SwapC.device...
[ 14.860398] systemd[1]: Expecting device dev-disk-by\x2dpartlabel-SwapB.device...
[ 14.860586] systemd[1]: Expecting device dev-mapper-SwapB.device...
[ 14.860769] systemd[1]: Expecting device dev-disk-by\x2dpartlabel-SwapA.device...
[ 14.860957] systemd[1]: Expecting device dev-mapper-SwapA.device...
[ 14.861145] systemd[1]: Starting Root Slice.
[ 14.894757] systemd[1]: Created slice Root Slice.
[ 14.894865] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 14.895212] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 14.895303] systemd[1]: Starting Delayed Shutdown Socket.
[ 14.895592] systemd[1]: Listening on Delayed Shutdown Socket.
[ 14.895707] systemd[1]: Starting Journal Socket (/dev/log).
[ 14.896037] systemd[1]: Listening on Journal Socket (/dev/log).
[ 14.896132] systemd[1]: Starting Syslog Socket.
[ 14.896398] systemd[1]: Listening on Syslog Socket.
[ 14.896485] systemd[1]: Starting User and Session Slice.
[ 14.897492] systemd[1]: Created slice User and Session Slice.
[ 14.897611] systemd[1]: Starting udev Control Socket.
[ 14.897903] systemd[1]: Listening on udev Control Socket.
[ 14.898010] systemd[1]: Starting udev Kernel Socket.
[ 14.898259] systemd[1]: Listening on udev Kernel Socket.
[ 14.898372] systemd[1]: Starting Journal Socket.
[ 14.898692] systemd[1]: Listening on Journal Socket.
[ 14.898870] systemd[1]: Starting System Slice.
[ 14.899909] systemd[1]: Created slice System Slice.
[ 14.900082] systemd[1]: Starting File System Check on Root Device...
[ 14.902714] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 14.905533] systemd[1]: Starting system-systemd\x2dcryptsetup.slice.
[ 14.914040] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 14.914475] systemd[1]: Mounting Debug File System...
[ 14.917585] systemd[1]: Starting Load Kernel Modules...
[ 14.931776] systemd[1]: Mounted Huge Pages File System.
[ 14.932310] systemd[1]: Started Set Up Additional Binary Formats.
[ 14.932442] systemd[1]: Mounting POSIX Message Queue File System...
[ 14.948222] systemd[1]: Starting udev Coldplug all Devices...
[ 14.966028] systemd[1]: Starting system-openvpn.slice.
[ 14.970539] systemd[1]: Created slice system-openvpn.slice.
[ 14.971838] systemd[1]: Starting system-getty.slice.
[ 14.977416] systemd[1]: Created slice system-getty.slice.
[ 14.977583] systemd[1]: Starting Journal Service...
[ 15.002628] systemd[1]: Started Journal Service.
[ 15.013404] fuse init (API version 7.23)
[ 15.082944] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 15.102065] loop: module loaded
[ 15.430635] systemd-udevd[215]: starting version 215
[ 16.079439] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 16.083718] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 16.083908] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 16.085430] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 16.270733] usbcore: registered new interface driver usbfs
[ 16.270814] usbcore: registered new interface driver hub
[ 16.272293] usbcore: registered new device driver usb
[ 16.371636] xhci_hcd 0000:01:01.0: xHCI Host Controller
[ 16.372684] xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 1
[ 16.373243] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.373264] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.373280] usb usb1: Product: xHCI Host Controller
[ 16.373292] usb usb1: Manufacturer: Linux 3.16.0-4-kirkwood xhci_hcd
[ 16.373304] usb usb1: SerialNumber: 0000:01:01.0
[ 16.373861] hub 1-0:1.0: USB hub found
[ 16.373905] hub 1-0:1.0: 2 ports detected
[ 16.388357] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
[ 16.388524] libphy: PHY orion-mdio-mii:00 not found
[ 16.388556] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 16.388604] libphy: PHY orion-mdio-mii:01 not found
[ 16.388627] platform mv643xx_eth_port.1: Driver mv643xx_eth_port requests probe deferral
[ 16.400110] libphy: PHY orion-mdio-mii:00 not found
[ 16.400156] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 16.400213] libphy: PHY orion-mdio-mii:01 not found
[ 16.400238] platform mv643xx_eth_port.1: Driver mv643xx_eth_port requests probe deferral
[ 16.400415] libphy: PHY orion-mdio-mii:00 not found
[ 16.400441] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 16.400493] libphy: PHY orion-mdio-mii:01 not found
[ 16.400516] platform mv643xx_eth_port.1: Driver mv643xx_eth_port requests probe deferral
[ 16.402746] xhci_hcd 0000:01:01.0: xHCI Host Controller
[ 16.402780] xhci_hcd 0000:01:01.0: new USB bus registered, assigned bus number 2
[ 16.402931] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 16.402950] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.402966] usb usb2: Product: xHCI Host Controller
[ 16.402977] usb usb2: Manufacturer: Linux 3.16.0-4-kirkwood xhci_hcd
[ 16.402990] usb usb2: SerialNumber: 0000:01:01.0
[ 16.403538] hub 2-0:1.0: USB hub found
[ 16.403589] hub 2-0:1.0: 2 ports detected
[ 16.422979] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 16.428044] libphy: PHY orion-mdio-mii:00 not found
[ 16.428089] platform mv643xx_eth_port.0: Driver mv643xx_eth_port requests probe deferral
[ 16.428149] libphy: PHY orion-mdio-mii:01 not found
[ 16.428173] platform mv643xx_eth_port.1: Driver mv643xx_eth_port requests probe deferral
[ 16.437292] ehci-orion: EHCI orion driver
[ 16.505004] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:08:9b:d1:bb:fe
[ 16.505105] libphy: PHY orion-mdio-mii:01 not found
[ 16.505137] platform mv643xx_eth_port.1: Driver mv643xx_eth_port requests probe deferral
[ 16.545625] mv643xx_eth_port mv643xx_eth_port.1 eth1: port 0 with MAC address 00:08:9b:d1:bb:ff
[ 16.552504] libphy: orion_mdio_bus: probed
[ 16.664761] alg: hash: Test 3 failed for mv-sha1
[ 16.664790] 00000000: 10 bf d7 00 71 0b bb 83 3a 26 d0 97 13 05 99 f5
[ 16.664802] 00000010: 3a 92 53 3c
[ 16.761289] alg: hash: Test 1 failed for mv-hmac-sha1
[ 16.761317] 00000000: 0c aa 9f d5 37 c3 79 3a 91 d9 21 5f 42 2b 2c 24
[ 16.761329] 00000010: b7 c3 16 0c
[ 16.761821] orion-ehci orion-ehci.0: EHCI Host Controller
[ 16.761860] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 3
[ 16.762017] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 16.771700] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 16.771886] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 16.771905] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 16.771921] usb usb3: Product: EHCI Host Controller
[ 16.771933] usb usb3: Manufacturer: Linux 3.16.0-4-kirkwood ehci_hcd
[ 16.771946] usb usb3: SerialNumber: orion-ehci.0
[ 16.772490] hub 3-0:1.0: USB hub found
[ 16.772533] hub 3-0:1.0: 1 port detected
[ 17.083720] usb 3-1: new high-speed USB device number 2 using orion-ehci
[ 17.217454] usb 3-1: New USB device found, idVendor=05e3, idProduct=0608
[ 17.217484] usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 17.217498] usb 3-1: Product: USB2.0 Hub
[ 17.218345] hub 3-1:1.0: USB hub found
[ 17.218663] hub 3-1:1.0: 4 ports detected
[ 18.698939] BTRFS info (device sdd1): disk space caching is enabled
[ 18.869972] systemd-journald[201]: Received request to flush runtime journal from PID 1
[ 19.124684] device-mapper: uevent: version 1.0.3
[ 19.126893] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[ 19.649659] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 19.740215] nf_conntrack version 0.5.0 (8025 buckets, 32100 max)
[ 20.926919] mv643xx_eth_port mv643xx_eth_port.1 eth1: link down
[ 20.927017] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 21.022677] Adding 1048572k swap on /dev/mapper/SwapD. Priority:-1 extents:1 across:1048572k FS
[ 21.067921] Adding 1048572k swap on /dev/mapper/SwapC. Priority:-2 extents:1 across:1048572k FS
[ 21.072346] Adding 1048572k swap on /dev/mapper/SwapB. Priority:-3 extents:1 across:1048572k FS
[ 21.073711] Adding 1048572k swap on /dev/mapper/SwapA. Priority:-4 extents:1 across:1048572k FS
[ 23.986007] mv643xx_eth_port mv643xx_eth_port.1 eth1: link up, 1000 Mb/s, full duplex, flow control disabled
[ 23.986077] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 29.949675] RPC: Registered named UNIX socket transport module.
[ 29.949703] RPC: Registered udp transport module.
[ 29.949713] RPC: Registered tcp transport module.
[ 29.949723] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 29.974018] FS-Cache: Loaded
[ 30.011978] FS-Cache: Netfs 'nfs' registered for caching
[ 30.061005] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 32.912575] tun: Universal TUN/TAP device driver, 1.6
[ 32.912601] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 101.314940] NET: Registered protocol family 38
[ 102.104873] BTRFS: device label Data devid 1 transid 3609 /dev/dm-4
[ 107.685290] BTRFS: device label Data devid 2 transid 3609 /dev/dm-5
[ 107.977048] BTRFS info (device dm-5): disk space caching is enabled
Reply to: