Bug#775059: linux-image-3.2.0-4-amd64: kernel update broke suspend to ram - system crashes instead
Package: src:linux
Version: 3.2.65-1
Severity: important
Dear Maintainer,
*** Please consider answering these questions, where appropriate ***
* What led up to the situation?
* What exactly did you do (or not do) that was effective (or
ineffective)?
* What was the outcome of this action?
* What outcome did you expect instead?
*** End of the template - remove these lines ***
-- Package-specific info:
** Version:
Linux version 3.2.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 SMP Debian 3.2.65-1
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-amd64 root=UUID=5ff7dd5a-2630-4c04-a406-2b6ec7dd8a91 ro quiet
** Tainted: C (1024)
* Module from drivers/staging has been loaded.
** Kernel log:
[ 6.389929] Bluetooth: Core ver 2.16
[ 6.389958] NET: Registered protocol family 31
[ 6.389962] Bluetooth: HCI device and connection manager initialized
[ 6.389967] Bluetooth: HCI socket layer initialized
[ 6.389970] Bluetooth: L2CAP socket layer initialized
[ 6.389982] Bluetooth: SCO socket layer initialized
[ 6.413597] asus_wmi: Backlight controlled by ACPI video driver
[ 6.433822] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 6.433887] usbcore: registered new interface driver btusb
[ 6.441280] Bluetooth: Atheros AR30xx firmware driver ver 1.0
[ 6.463767] iTCO_vendor_support: vendor-support=0
[ 6.464781] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 6.464938] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 6.465168] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.476063] EFI Variables Facility v0.08 2004-May-17
[ 6.569785] snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
[ 6.569848] snd_hda_intel 0000:00:1b.0: setting latency timer to 64
[ 6.594295] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f01)
[ 6.630708] psmouse serio4: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0c.
[ 6.706074] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input6
[ 6.825207] Linux media interface: v0.10
[ 6.852041] Linux video capture interface: v2.00
[ 6.882632] usb 1-1.1: firmware: agent loaded ar3k/AthrBT_0x11020000.dfu into memory
[ 6.921559] ath9k 0000:02:00.0: setting latency timer to 64
[ 6.931970] ath: EEPROM regdomain: 0x60
[ 6.931974] ath: EEPROM indicates we should expect a direct regpair map
[ 6.931979] ath: Country alpha2 being used: 00
[ 6.931982] ath: Regpair used: 0x60
[ 6.947840] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 6.948642] Registered led device: ath9k-phy0
[ 6.948655] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xffffc9000aa00000, irq=17
[ 6.956031] uvcvideo: Found UVC 1.00 device USB Camera (0bda:570c)
[ 6.961928] input: USB Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input7
[ 6.962124] usbcore: registered new interface driver uvcvideo
[ 6.962129] USB Video Class driver (1.1.1)
[ 6.970879] usb 1-1.1: firmware: agent loaded ar3k/ramps_0x11020000_40.dfu into memory
[ 6.974393] usbcore: registered new interface driver ath3k
[ 7.211737] usb 1-1.1: USB disconnect, device number 3
[ 7.411486] usb 1-1.1: new full-speed USB device number 5 using ehci_hcd
[ 7.446416] cfg80211: World regulatory domain updated:
[ 7.446422] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 7.446429] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7.446435] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 7.446440] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 7.446445] cfg80211: (5170000 KHz - 5250000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[ 7.446450] cfg80211: (5250000 KHz - 5330000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[ 7.446455] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[ 7.446460] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 7.446466] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 7.504957] usb 1-1.1: string descriptor 0 read error: -22
[ 7.505074] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3393
[ 7.505079] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 8.273230] HDMI status: Codec=3 Pin=6 Presence_Detect=0 ELD_Valid=0
[ 8.273448] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.273744] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.274672] checking generic (e0000000 300000) vs hw (e0000000 10000000)
[ 8.274678] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
[ 8.274712] Console: switching to colour dummy device 80x25
[ 8.276716] i915 0000:00:02.0: setting latency timer to 64
[ 8.421898] mtrr: type mismatch for e0000000,10000000 old: write-back new: write-combining
[ 8.421905] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 8.422312] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 8.422328] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.422332] [drm] Driver supports precise vblank timestamp query.
[ 8.422399] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 8.809584] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 9.010014] fbcon: inteldrmfb (fb0) is primary device
[ 9.215368] Console: switching to colour frame buffer device 170x48
[ 9.226574] fb0: inteldrmfb frame buffer device
[ 9.226579] drm: registered panic notifier
[ 9.233050] acpi device:37: registered as cooling_device2
[ 9.255699] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[ 9.255827] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.255875] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 10.200964] Adding 6347772k swap on /dev/sda5. Priority:-1 extents:1 across:6347772k
[ 10.231854] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 10.684792] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 10.798309] loop: module loaded
[ 14.217327] FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[ 14.287035] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 15.535808] RPC: Registered named UNIX socket transport module.
[ 15.535814] RPC: Registered udp transport module.
[ 15.535817] RPC: Registered tcp transport module.
[ 15.535820] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 15.575082] FS-Cache: Loaded
[ 15.613207] FS-Cache: Netfs 'nfs' registered for caching
[ 15.632987] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 17.728075] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input11
[ 18.749215] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 18.749222] Bluetooth: BNEP filters: protocol multicast
[ 18.792957] Bluetooth: RFCOMM TTY layer initialized
[ 18.792967] Bluetooth: RFCOMM socket layer initialized
[ 18.792971] Bluetooth: RFCOMM ver 1.11
[ 19.429394] lp: driver loaded but no devices found
[ 19.627531] ppdev: user-space parallel port driver
[ 20.366896] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 167.288788] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 177.938964] eth0: no IPv6 routers present
[ 1563.740603] alx 0000:03:00.0: eth0: speed = 0x2f, autoneg = 1
[ 2129.624065] eth0: no IPv6 routers present
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: X201EP
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: X201EP.209
board_vendor: ASUSTeK COMPUTER INC.
board_name: X201EP
board_version: 1.0
** Loaded modules:
parport_pc
ppdev
lp
parport
rfcomm
bnep
uinput
nfsd
nfs
nfs_acl
auth_rpcgss
fscache
lockd
sunrpc
nls_utf8
nls_cp437
vfat
fat
loop
snd_hda_codec_hdmi
snd_hda_codec_realtek
i915
uvcvideo
arc4
ath9k
joydev
videodev
v4l2_compat_ioctl32
media
ath9k_common
ath9k_hw
drm_kms_helper
snd_hda_intel
snd_hda_codec
acpi_cpufreq
mperf
efivars
iTCO_wdt
iTCO_vendor_support
ath3k
btusb
coretemp
bluetooth
asus_nb_wmi
asus_wmi
snd_hwdep
ath
mac80211
cfg80211
snd_pcm
drm
sparse_keymap
i2c_algo_bit
evdev
pcspkr
psmouse
i2c_i801
i2c_core
rfkill
snd_page_alloc
serio_raw
crc32c_intel
ghash_clmulni_intel
cryptd
battery
snd_seq
snd_seq_device
snd_timer
snd
ac
video
processor
button
wmi
power_supply
soundcore
ext4
crc16
jbd2
mbcache
sg
sd_mod
crc_t10dif
ahci
libahci
thermal
thermal_sys
xhci_hcd
libata
scsi_mod
ehci_hcd
alx(C)
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
Subsystem: ASUSTeK Computer Inc. Device [1043:108d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0106] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device [1043:108d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 44
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:108d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f7e00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:108d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f7e1a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:108d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7e18000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:107f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 43
Region 0: Memory at f7e10000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7d00000-f7dfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 4 [8086:1e16] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Device [1043:108d]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7e17000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1f.0 ISA bridge [0601]: Intel Corporation 7 Series Chipset Family LPC Controller [8086:1e5e] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:108d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Device [1043:108d]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 42
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7e16000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:108d]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f7e15000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
02:00.0 Network controller [0280]: Atheros Communications Inc. AR9462 Wireless Network Adapter [168c:0034] (rev 01)
Subsystem: AzureWave Device [1a3b:2110]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=512K]
Expansion ROM at f7d80000 [disabled] [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
03:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR8162 Fast Ethernet [1969:1090] (rev 10)
Subsystem: ASUSTeK Computer Inc. Device [1043:200f]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 40
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at e000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 005: ID 13d3:3393 IMC Networks
Bus 001 Device 004: ID 0bda:570c Realtek Semiconductor Corp.
-- System Information:
Debian Release: 7.8
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.2.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.2.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.49
ii initramfs-tools [linux-initramfs-tool] 0.109.1
ii kmod 9-3
ii linux-base 3.5
ii module-init-tools 9-3
Versions of packages linux-image-3.2.0-4-amd64 recommends:
pn firmware-linux-free <none>
Versions of packages linux-image-3.2.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
pn grub-pc | extlinux | lilo <none>
pn linux-doc-3.2 <none>
Versions of packages linux-image-3.2.0-4-amd64 is related to:
ii firmware-atheros 0.36+wheezy.1
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.2.0-4-amd64/postinst/depmod-error-initrd-3.2.0-4-amd64: false
linux-image-3.2.0-4-amd64/prerm/removing-running-kernel-3.2.0-4-amd64: true
linux-image-3.2.0-4-amd64/postinst/ignoring-ramdisk:
linux-image-3.2.0-4-amd64/postinst/missing-firmware-3.2.0-4-amd64:
Reply to: