Bug#774576: linux-image-3.16.0-4-amd64: SATA errors with non-faulty disks
Package: src:linux
Version: 3.16.7-ckt2-1
Severity: grave
Justification: causes non-serious data loss
Dear Maintainer,
I'm getting SATA errors with my drives, using two different motherboards (old
one, Nvidia chipset, new one, Intel chipset), new, quality SATA cables, a new,
yesterday-bought hard disk. Seems the errors come more frequently when the
drives wake up from sleep.
[Sun Jan 4 16:20:36 2015] ata2.00: status: { DRDY }
[Sun Jan 4 16:20:36 2015] ata2.00: failed command: WRITE FPDMA QUEUED
[Sun Jan 4 16:20:36 2015] ata2.00: cmd 61/10:f0:c0:09:40/00:00:3d:00:00/40 tag
30 ncq 8192 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[Sun Jan 4 16:20:36 2015] ata2.00: status: { DRDY }
[Sun Jan 4 16:20:36 2015] ata2: hard resetting link
[Sun Jan 4 16:20:37 2015] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl
300)
[Sun Jan 4 16:20:37 2015] ata2.00: configured for UDMA/133
[Sun Jan 4 16:20:37 2015] ata2: EH complete
[Sun Jan 4 16:22:07 2015] ata4.00: exception Emask 0x0 SAct 0x1800000 SErr 0x0
action 0x6 frozen
[Sun Jan 4 16:22:07 2015] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun Jan 4 16:22:07 2015] ata4.00: cmd 61/08:b8:00:08:00/00:00:00:00:00/40 tag
23 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[Sun Jan 4 16:22:07 2015] ata4.00: status: { DRDY }
[Sun Jan 4 16:22:07 2015] ata4.00: failed command: WRITE FPDMA QUEUED
[Sun Jan 4 16:22:07 2015] ata4.00: cmd 61/08:c0:00:08:04/00:00:3a:00:00/40 tag
24 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[Sun Jan 4 16:22:07 2015] ata4.00: status: { DRDY }
[Sun Jan 4 16:22:07 2015] ata4: hard resetting link
[Sun Jan 4 16:22:08 2015] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl
300)
[Sun Jan 4 16:22:08 2015] ata4.00: configured for UDMA/133
[Sun Jan 4 16:22:08 2015] ata4.00: device reported invalid CHS sector 0
[Sun Jan 4 16:22:08 2015] ata4.00: device reported invalid CHS sector 0
[Sun Jan 4 16:22:08 2015] ata4: EH complete
[Sun Jan 4 16:45:33 2015] ata4.00: exception Emask 0x0 SAct 0x400000 SErr 0x0
action 0x6 frozen
[Sun Jan 4 16:45:33 2015] ata4.00: failed command: READ FPDMA QUEUED
[Sun Jan 4 16:45:33 2015] ata4.00: cmd 60/20:b0:08:08:80/00:00:5a:00:00/40 tag
22 ncq 16384 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[Sun Jan 4 16:45:33 2015] ata4.00: status: { DRDY }
[Sun Jan 4 16:45:33 2015] ata4: hard resetting link
[Sun Jan 4 16:45:33 2015] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl
300)
[Sun Jan 4 16:45:33 2015] ata4.00: configured for UDMA/133
[Sun Jan 4 16:45:33 2015] ata4.00: device reported invalid CHS sector 0
[Sun Jan 4 16:45:33 2015] ata4: EH complete
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.3 (Debian 4.8.3-16) ) #1 SMP Debian 3.16.7-ckt2-1 (2014-12-08)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=9b2fd7b4-8d27-45e8-86f4-24c53f451c99 ro quiet
** Tainted: PO (4097)
* Proprietary module has been loaded.
* Out-of-tree module has been loaded.
** Kernel log:
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533823] ata2.00: status: { DRDY }
[29316.533824] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533825] ata2.00: cmd 61/18:70:90:0c:40/00:00:3d:00:00/40 tag 14 ncq 12288 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533826] ata2.00: status: { DRDY }
[29316.533827] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533828] ata2.00: cmd 61/10:78:e0:0c:40/00:00:3d:00:00/40 tag 15 ncq 8192 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533829] ata2.00: status: { DRDY }
[29316.533830] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533831] ata2.00: cmd 61/10:80:f8:0c:40/00:00:3d:00:00/40 tag 16 ncq 8192 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533832] ata2.00: status: { DRDY }
[29316.533833] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533834] ata2.00: cmd 61/10:88:10:0d:40/00:00:3d:00:00/40 tag 17 ncq 8192 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533835] ata2.00: status: { DRDY }
[29316.533836] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533837] ata2.00: cmd 61/38:90:28:0d:40/00:00:3d:00:00/40 tag 18 ncq 28672 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533838] ata2.00: status: { DRDY }
[29316.533839] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533840] ata2.00: cmd 61/10:98:b0:0d:40/00:00:3d:00:00/40 tag 19 ncq 8192 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533841] ata2.00: status: { DRDY }
[29316.533842] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533843] ata2.00: cmd 61/18:a0:d0:0d:40/00:00:3d:00:00/40 tag 20 ncq 12288 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533844] ata2.00: status: { DRDY }
[29316.533845] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533846] ata2.00: cmd 61/10:a8:00:19:40/00:00:3d:00:00/40 tag 21 ncq 8192 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533847] ata2.00: status: { DRDY }
[29316.533848] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533849] ata2.00: cmd 61/10:b0:00:29:40/00:00:3d:00:00/40 tag 22 ncq 8192 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533850] ata2.00: status: { DRDY }
[29316.533851] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533852] ata2.00: cmd 61/10:b8:00:39:40/00:00:3d:00:00/40 tag 23 ncq 8192 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533853] ata2.00: status: { DRDY }
[29316.533854] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533855] ata2.00: cmd 61/08:c0:08:49:40/00:00:3d:00:00/40 tag 24 ncq 4096 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533856] ata2.00: status: { DRDY }
[29316.533857] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533858] ata2.00: cmd 61/08:c8:08:59:40/00:00:3d:00:00/40 tag 25 ncq 4096 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533859] ata2.00: status: { DRDY }
[29316.533860] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533861] ata2.00: cmd 61/10:d0:00:69:40/00:00:3d:00:00/40 tag 26 ncq 8192 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533862] ata2.00: status: { DRDY }
[29316.533863] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533864] ata2.00: cmd 61/08:d8:08:89:40/00:00:3d:00:00/40 tag 27 ncq 4096 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533865] ata2.00: status: { DRDY }
[29316.533866] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533867] ata2.00: cmd 61/08:e0:08:99:40/00:00:3d:00:00/40 tag 28 ncq 4096 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533868] ata2.00: status: { DRDY }
[29316.533869] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533870] ata2.00: cmd 61/08:e8:00:b9:40/00:00:3d:00:00/40 tag 29 ncq 4096 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533871] ata2.00: status: { DRDY }
[29316.533872] ata2.00: failed command: WRITE FPDMA QUEUED
[29316.533873] ata2.00: cmd 61/10:f0:c0:09:40/00:00:3d:00:00/40 tag 30 ncq 8192 out
res 40/00:ec:00:b9:40/00:00:3d:00:00/40 Emask 0x10 (ATA bus error)
[29316.533874] ata2.00: status: { DRDY }
[29316.533876] ata2: hard resetting link
[29317.134702] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[29317.136487] ata2.00: configured for UDMA/133
[29317.136507] ata2: EH complete
[29375.320189] EXT4-fs error (device sdd1): htree_dirblock_to_tree:914: inode #48013315: block 191913972: comm chmod: bad entry in directory: rec_len % 4 != 0 - offset=0(0), inode=1515870810, rec_len=23130, name_len=90
[29407.880081] ata4.00: exception Emask 0x0 SAct 0x1800000 SErr 0x0 action 0x6 frozen
[29407.880084] ata4.00: failed command: WRITE FPDMA QUEUED
[29407.880087] ata4.00: cmd 61/08:b8:00:08:00/00:00:00:00:00/40 tag 23 ncq 4096 out
res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[29407.880088] ata4.00: status: { DRDY }
[29407.880089] ata4.00: failed command: WRITE FPDMA QUEUED
[29407.880090] ata4.00: cmd 61/08:c0:00:08:04/00:00:3a:00:00/40 tag 24 ncq 4096 out
res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[29407.880091] ata4.00: status: { DRDY }
[29407.880093] ata4: hard resetting link
[29408.200633] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[29408.202097] ata4.00: configured for UDMA/133
[29408.202100] ata4.00: device reported invalid CHS sector 0
[29408.202102] ata4.00: device reported invalid CHS sector 0
[29408.202106] ata4: EH complete
[30813.191025] ata4.00: exception Emask 0x0 SAct 0x400000 SErr 0x0 action 0x6 frozen
[30813.191032] ata4.00: failed command: READ FPDMA QUEUED
[30813.191038] ata4.00: cmd 60/20:b0:08:08:80/00:00:5a:00:00/40 tag 22 ncq 16384 in
res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[30813.191040] ata4.00: status: { DRDY }
[30813.191044] ata4: hard resetting link
[30813.511583] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[30813.513079] ata4.00: configured for UDMA/133
[30813.513083] ata4.00: device reported invalid CHS sector 0
[30813.513089] ata4: EH complete
** Model information
sys_vendor: Gigabyte Technology Co., Ltd.
product_name: Z97X-UD5H
product_version: To be filled by O.E.M.
chassis_vendor: Gigabyte Technology Co., Ltd.
chassis_version: To Be Filled By O.E.M.
bios_vendor: American Megatrends Inc.
bios_version: F8
board_vendor: Gigabyte Technology Co., Ltd.
board_name: Z97X-UD5H
board_version: x.x
** Loaded modules:
btrfs
xor
raid6_pq
ufs
qnx4
hfsplus
hfs
minix
ntfs
vfat
msdos
fat
jfs
xfs
libcrc32c
dm_mod
iptable_filter
ip_tables
x_tables
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
arc4
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
rt2800usb
rt2x00usb
rt2800lib
rt2x00lib
mac80211
cfg80211
crc_ccitt
rfkill
joydev
x86_pkg_temp_thermal
intel_powerclamp
nvidia(PO)
intel_rapl
kvm_intel
kvm
snd_hda_codec_hdmi
snd_ca0106
crc32_pclmul
ghash_clmulni_intel
aesni_intel
snd_rawmidi
mxm_wmi
aes_x86_64
evdev
snd_hda_intel
snd_hda_controller
snd_hda_codec
snd_seq_device
snd_hwdep
snd_ac97_codec
snd_pcm
snd_timer
lrw
snd
gf128mul
psmouse
pcspkr
shpchp
soundcore
serio_raw
i915
drm_kms_helper
drm
i2c_algo_bit
ac97_bus
i2c_designware_platform
tpm_infineon
tpm_tis
glue_helper
ablk_helper
cryptd
mei_me
mei
i2c_designware_core
battery
video
tpm
intel_smartconnect
button
processor
wmi
acpi_pad
coretemp
fuse
autofs4
ext4
crc16
mbcache
jbd2
hid_generic
sg
usbhid
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_pclmul
crct10dif_common
ahci
libahci
crc32c_intel
libata
xhci_hcd
scsi_mod
e1000e
alx
mdio
ptp
usbcore
pps_core
usb_common
fan
thermal
thermal_sys
sdhci_acpi
sdhci
mmc_core
i2c_hid
hid
i2c_core
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4th Gen Core Processor DRAM Controller [8086:0c00] (rev 06)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5000]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: hsw_uncore
00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: f4000000-f60fffff
Prefetchable memory behind bridge: 00000000e0000000-00000000ebffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:02.0 VGA compatible controller [0300]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller [8086:0412] (rev 06) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:d000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 50
Region 0: Memory at f6400000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Capabilities: <access denied>
Kernel driver in use: i915
00:03.0 Audio device [0403]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller [8086:0c0c] (rev 06)
Subsystem: Intel Corporation Device [8086:2010]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 51
Region 0: Memory at f6a30000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.0 USB controller [0c03]: Intel Corporation 9 Series Chipset Family USB xHCI Controller [8086:8cb1] (prog-if 30 [XHCI])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5007]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 47
Region 0: Memory at f6a20000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 9 Series Chipset Family ME Interface #1 [8086:8cba]
Subsystem: Gigabyte Technology Co., Ltd Device [1458:1c3a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 49
Region 0: Memory at f6a37000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-V [8086:153b]
Subsystem: Gigabyte Technology Co., Ltd Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 46
Region 0: Memory at f6a00000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at f6a36000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1c.0 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI Express Root Port 1 [8086:8c90] (rev d0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI Express Root Port 3 [8086:8c94] (rev d0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: f6900000-f69fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.3 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d0) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1c.6 PCI bridge [0604]: Intel Corporation 9 Series Chipset Family PCI Express Root Port 7 [8086:8c9c] (rev d0) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
I/O behind bridge: 0000b000-0000bfff
Memory behind bridge: f6800000-f68fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1f.0 ISA bridge [0601]: Intel Corporation 9 Series Chipset Family Z97 LPC Controller [8086:8cc4]
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:1f.2 SATA controller [0106]: Intel Corporation 9 Series Chipset Family SATA Controller [AHCI Mode] [8086:8c82] (prog-if 01 [AHCI 1.0])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:b005]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 48
Region 0: I/O ports at f0d0 [size=8]
Region 1: I/O ports at f0c0 [size=4]
Region 2: I/O ports at f0b0 [size=8]
Region 3: I/O ports at f0a0 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f6a35000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 9 Series Chipset Family SMBus Controller [8086:8ca2]
Subsystem: Gigabyte Technology Co., Ltd Device [1458:5001]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f6a34000 (64-bit, non-prefetchable) [disabled] [size=256]
Region 4: I/O ports at f040 [size=32]
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF114 [GeForce GTX 560] [10de:1201] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Gigabyte Technology Co., Ltd Device [1458:352a]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 53
Region 0: Memory at f4000000 (32-bit, non-prefetchable) [size=32M]
Region 1: Memory at e0000000 (64-bit, prefetchable) [size=128M]
Region 3: Memory at e8000000 (64-bit, prefetchable) [size=64M]
Region 5: I/O ports at e000 [size=128]
[virtual] Expansion ROM at f6000000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nvidia
01:00.1 Audio device [0403]: NVIDIA Corporation GF114 HDMI Audio Controller [10de:0e0c] (rev a1)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:352a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at f6080000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
03:00.0 Ethernet controller [0200]: Qualcomm Atheros Killer E220x Gigabit Ethernet Controller [1969:e091] (rev 10)
Subsystem: Gigabyte Technology Co., Ltd Device [1458:e000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 52
Region 0: Memory at f6900000 (64-bit, non-prefetchable) [size=256K]
Region 2: I/O ports at d000 [size=128]
Capabilities: <access denied>
Kernel driver in use: alx
04:00.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 41) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=04, secondary=05, subordinate=05, sec-latency=32
I/O behind bridge: 0000c000-0000cfff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr+ DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
05:01.0 Multimedia audio controller [0401]: Creative Labs CA0106 Soundblaster [1102:0007]
Subsystem: Creative Labs SB0570 [SB Audigy SE] [1102:100a]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (500ns min, 5000ns max)
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at c000 [size=32]
Capabilities: <access denied>
Kernel driver in use: snd_ca0106
** USB devices:
Bus 002 Device 002: ID 045b:0210 Hitachi, Ltd
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 148f:3072 Ralink Technology, Corp. RT3072 Wireless Adapter
Bus 001 Device 002: ID 045b:0209 Hitachi, Ltd
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: 8.0
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=en_US.utf8, LC_CTYPE=en_US.utf8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.55
ii initramfs-tools [linux-initramfs-tool] 0.118
ii kmod 18-3
ii linux-base 3.5
Versions of packages linux-image-3.16.0-4-amd64 recommends:
pn firmware-linux-free <none>
pn irqbalance <none>
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-20
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.43
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
Reply to: