[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#620814: marked as done (initramfs-tools: fails to include essential module for other leg of md0)



Your message dated Sun, 27 Dec 2015 23:00:15 +0000
with message-id <E1aDKIR-0001kp-8O@franck.debian.org>
and subject line Bug#620814: fixed in initramfs-tools 0.121~rc2
has caused the Debian Bug report #620814,
regarding initramfs-tools: fails to include essential module for other leg of md0
to be marked as done.

This means that you claim that the problem has been dealt with.
If this is not the case it is now your responsibility to reopen the
Bug report if necessary, and/or fix the problem forthwith.

(NB: If you are a system administrator and have no idea what this
message is talking about, this may indicate a serious mail system
misconfiguration somewhere. Please contact owner@bugs.debian.org
immediately.)


-- 
620814: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=620814
Debian Bug Tracking System
Contact owner@bugs.debian.org with problems
--- Begin Message ---
Package: initramfs-tools
Version: 0.98.8
Severity: normal

(resending manually because exim hadn't been configured yet)

This is a new Wheezy install on an old server machine. The machine has four
PATA disks, tied to two controllers. The four disks are combined into a SW-raid
volume using mdadm:

ladmin@fury:/tmp$ sudo mdadm --detail /dev/md0|grep /dev/
/dev/md0:
       0       8       36        0      active sync   /dev/sdc4
       1       8       52        1      active sync   /dev/sdd4
       2       8        4        2      active sync   /dev/sda4
       4       8       20        3      active sync   /dev/sdb4

[ 1.145853] scsi0 : pata_sil680
[ 1.146143] scsi1 : pata_sil680
[ 1.147018] ata1: PATA max UDMA/133 cmd 0xc400 ctl 0xc000 bmdma 0xb000 irq 23
[ 1.147085] ata2: PATA max UDMA/133 cmd 0xb800 ctl 0xb400 bmdma 0xb008 irq 23
[ 1.148407] scsi2 : pata_serverworks
[ 1.148835] scsi3 : pata_serverworks
[ 1.156965] ata3: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 1.157034] ata4: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15


During installation, I configured initramfs-tools to determine the required
modules automatically, which resulted in a non-booting system (notice that
the sil680 module is missing):

ladmin@fury:/tmp$ lsinitramfs /boot/initrd.img-2.6.32-5-686 |grep ata
lib/udev/ata_id
lib/modules/2.6.38-2-686/kernel/drivers/ata
lib/modules/2.6.38-2-686/kernel/drivers/ata/ata_generic.ko
lib/modules/2.6.38-2-686/kernel/drivers/ata/pata_serverworks.ko
lib/modules/2.6.38-2-686/kernel/drivers/ata/libata.ko


As a workaround, I've now added both pata_ modules to /e/i-t/modules,
but that is about as far as my knowledge of initramfs-tools will go.
I'll be glad to try other suggestions, or provide more info.


--
(regarding the below: I apologize, I can get carried away sometimes...
I'll leave solving this up to you :)

From my reading of sh -x output, it appears that there is just one level too  
much indirection going on. We have a
  + readlink -f /dev/mapper/fury-root
  /dev/dm-0
Which finds the correct dm device. Following the trace, 
  + ls -1 /sys/block/dm-0/slaves
  + block=md0
md0 is identified as the correct md device underlying the lvm VG. But this is
also where it breaks down; the sed expression following it reduces /proc/mdstat
to just a single block device:
  + block=sdc
  [...]
  + readlink -f /sys/block/sdc/device

This code maps to dep_add_modules() in hook-functions, particularly the sed
expression on line 288 (preceded by comment "lvm on md"). The code surely
doesn't look like it's designed to handle more than one block device per
invocation, but that is probably what's needed here.  It's trivial to modify
the sed expression to that end (replacing the last -e argument):
  sed [...] -e 's/\[[0-9]\+\]//g' -e '/^'${block}' :/s/^[^[]*\[ //p'
But that still leaves the issue that the rest of the code expects $block to
only represent a single block device. At the very least, the "#Error out" and
"# sys walk ATA" code blocks (line 350+) would need a loop.



-- Package-specific info:
-- initramfs sizes
-rw-r--r-- 1 root root 4.2M Apr  3 21:37 /boot/initrd.img-2.6.32-5-686
-rw-r--r-- 1 root root 4.3M Apr  3 21:37 /boot/initrd.img-2.6.38-2-686
-- /proc/cmdline
BOOT_IMAGE=/vmlinuz-2.6.38-2-686 root=/dev/mapper/fury-root ro

-- resume
RESUME=/dev/mapper/sda3_crypt
-- /proc/filesystems
	btrfs
	ext4
	ext3

-- lsmod
Module                  Size  Used by
ext3                   98001  1 
jbd                    40818  1 ext3
dm_mirror              17249  1 
dm_region_hash         13072  1 dm_mirror
dm_log                 13269  3 dm_mirror,dm_region_hash
loop                   17805  0 
sha256_generic         16709  8 
aes_i586               16608  16 
aes_generic            37066  1 aes_i586
cbc                    12659  8 
dm_crypt               17809  4 
snd_pcm                52774  0 
snd_timer              22171  1 snd_pcm
ohci_hcd               21928  0 
ehci_hcd               34889  0 
snd                    38153  2 snd_pcm,snd_timer
usbcore                99058  3 ohci_hcd,ehci_hcd
soundcore              12878  1 snd
snd_page_alloc         12841  1 snd_pcm
tpm_tis                12949  0 
tpm                    17454  1 tpm_tis
tg3                   103807  0 
pcspkr                 12515  0 
tpm_bios               12799  1 tpm
aic7xxx                97720  0 
i2c_piix4              12480  0 
libphy                 18279  1 tg3
evdev                  13084  2 
processor              26983  0 
nls_base               12649  1 usbcore
i2c_core               18989  1 i2c_piix4
thermal_sys            17667  1 processor
scsi_transport_spi     19032  1 aic7xxx
button                 12866  0 
ext4                  251726  3 
mbcache                12810  2 ext3,ext4
jbd2                   55701  1 ext4
crc16                  12327  1 ext4
dm_mod                 56394  37 dm_mirror,dm_log,dm_crypt
raid456                51595  1 
async_raid6_recov      12459  1 raid456
async_pq               12503  2 raid456,async_raid6_recov
raid6_pq               86733  2 async_raid6_recov,async_pq
async_xor              12390  3 raid456,async_raid6_recov,async_pq
xor                    21454  1 async_xor
async_memcpy           12363  2 raid456,async_raid6_recov
async_tx               12510  5 raid456,async_raid6_recov,async_pq,async_xor,async_memcpy
raid10                 25891  1
md_mod                 80674  4 raid456,raid10
btrfs                 419245  1 
zlib_deflate           21186  1 btrfs
crc32c                 12576  1 
libcrc32c              12394  1 btrfs
sd_mod                 34941  20 
crc_t10dif             12332  1 sd_mod
ata_generic            12439  0 
pata_serverworks       12869  8 
pata_sil680            12646  8 
libata                131904  3 ata_generic,pata_serverworks,pata_sil680
scsi_mod              134369  4 aic7xxx,scsi_transport_spi,sd_mod,libata

-- /etc/initramfs-tools/modules
pata_sil680
pata_serverworks

-- /etc/kernel-img.conf
# Kernel image management overrides
# See kernel-img.conf(5) for details
do_symlinks = yes
do_bootloader = no
do_initrd = yes
link_in_boot = no

-- /etc/initramfs-tools/initramfs.conf
MODULES=most
BUSYBOX=y
KEYMAP=n
COMPRESS=gzip
BOOT=local
DEVICE=
NFSROOT=auto

-- /etc/initramfs-tools/update-initramfs.conf
update_initramfs=yes
backup_initramfs=no

-- /etc/crypttab
sda3_crypt /dev/sda3 /dev/urandom
cipher=aes-cbc-essiv:sha256,size=256,swap
sdb3_crypt /dev/sdb3 /dev/urandom
cipher=aes-cbc-essiv:sha256,size=256,swap
sdc3_crypt /dev/sdc3 /dev/urandom
cipher=aes-cbc-essiv:sha256,size=256,swap
sdd3_crypt /dev/sdd3 /dev/urandom
cipher=aes-cbc-essiv:sha256,size=256,swap

-- /proc/mdstat
Personalities : [raid10] [raid6] [raid5] [raid4] 
md1 : active raid10 sdc5[0] sdb5[3] sda5[2] sdd5[1]
      307062784 blocks super 1.2 512K chunks 2 offset-copies [4/4] [UUUU] 
md0 : active raid5 sdc4[0] sdb4[4] sda4[2] sdd4[1]
      18869760 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU] 
unused devices: <none>

-- mkinitramfs hooks
/etc/initramfs-tools/hooks/:

/usr/share/initramfs-tools/hooks:
btrfs
busybox
cryptgnupg
cryptkeyctl
cryptopenct
cryptopensc
cryptpassdev
cryptroot
dmsetup
keymap
klibc
lvm2
mdadm
thermal
udev


-- System Information:
Debian Release: wheezy/sid
  APT prefers stable
  APT policy: (900, 'stable'), (600, 'testing'), (300, 'unstable'), (200, 'experimental') Architecture: i386 (i686)

Kernel: Linux 2.6.38-2-686 (SMP w/1 CPU core)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8) (ignored: LC_ALL set to en_GB.UTF-8) Shell: /bin/sh linked to /bin/dash

Versions of packages initramfs-tools depends on:
ii  cpio                          2.11-7     GNU cpio -- a program to manage ar
ii  findutils                     4.4.2-1+b1 utilities for finding files--find,
ii  klibc-utils                   1.5.21-1   small utilities built with klibc f
ii  module-init-tools             3.12-1     tools for managing Linux kernel mo
ii  udev                          166-1      /dev/ and hotplug management daemo

Versions of packages initramfs-tools recommends:
ii  busybox                      1:1.17.1-10 Tiny utilities for small and embed

Versions of packages initramfs-tools suggests:
ii  bash-completion               1:1.3-1    programmable completion for the ba

-- no debconf information



--- End Message ---
--- Begin Message ---
Source: initramfs-tools
Source-Version: 0.121~rc2

We believe that the bug you reported is fixed in the latest version of
initramfs-tools, which is due to be installed in the Debian FTP archive.

A summary of the changes between this version and the previous one is
attached.

Thank you for reporting the bug, which will now be closed.  If you
have further comments please address them to 620814@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.

Debian distribution maintenance software
pp.
Ben Hutchings <ben@decadent.org.uk> (supplier of updated initramfs-tools package)

(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)


-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Tue, 22 Dec 2015 22:07:42 +0000
Source: initramfs-tools
Binary: initramfs-tools initramfs-tools-core
Architecture: all source
Version: 0.121~rc2
Distribution: experimental
Urgency: medium
Maintainer: Debian kernel team <debian-kernel@lists.debian.org>
Changed-By: Ben Hutchings <ben@decadent.org.uk>
Closes: 588452 602331 620814 633582 696632 697017 747871 766920 770394 782641 783291 783410 783620 784234 785147 785564 790095 791754 792557 793786 795831 795832 795837 795839 797361 799443 801154 807000 807004 807256
Description: 
 initramfs-tools-core - generic modular initramfs generator (core tools)
 initramfs-tools - generic modular initramfs generator (automation)
Changes:
 initramfs-tools (0.121~rc2) experimental; urgency=medium
 .
   * Upload to experimental, not unstable
 .
 initramfs-tools (0.121~rc1) unstable; urgency=medium
 .
   [ Ben Hutchings ]
   * [da2159f] Add .gitignore files to exclude generated and backup files
   * [8ad7317] bash-completion: Install using dh_bash-completion
   * [31d21d6] Rename lintian override file so dh_lintian installs it
     automatically
   * [9d45599] debian/control: Update and shorten description
   * [2bf8c27] Split initramfs-tools binary packages into core and automation
     hooks
   * [6562e1b] debian/control,debian/copyright: Use canonical HTTP-S URLs for
     Alioth git repos
   * [76dab5a] hook-functions: Include soft-dependencies of all kernel modules
     (Closes: #588452)
   * [7285ffb] hooks/busybox: Fail if busybox is wanted but not found
     (Closes: #785564)
   * [852b9ab] scripts/functions: Use shell to create stamp file instead of
     'touch' (Closes: #783291)
   * [9aea31d] sripts/local: Remove obsolete hint about ATA device renaming
   * [e0c8d03] hook-functions: Always use /proc/mounts, avoiding mangling of
     /dev/root (Closes: #766920)
   * [728f534] hook-functions: Fold sys_walk_modalias into sys_walk_mod_add
   * [d122ab6] hook-functions: Split block device sysfs lookup into a separate
     function
   * [aff5209] hook-functions: Remove loop-aes support
   * [3cb744c] hook-functions: Rewrite block device sysfs lookup to be generic
     (Closes: #747871, #785147, #807004, #807256)
   * [8ac52dc] hook-functions: Include modules for all components of a
     multi-disk device (Closes: #620814)
   * [c69313d] parse_numeric: Tighten check for whether 'root' parameter is a
     number (Closes: #697017)
   * [8062189] parse_numeric: Add support for 20-bit minor numbers in 'root'
     parameter
   * [88f98b5] parse_numeric: Replace numeric root with canonical device name
   * [28e5a0a] update-initramfs: Use linux-version command to sort versions
     (Closes: #770394, #795837)
   * [4b4e578] lsinitramfs.8: Update the BUGS section to note fix for #717805
     (Closes: #790095)
   * [fa82bf1] hooks/fsck: Stop copying sulogin, which is no longer used
   * [95beada] Only run fsck if enabled in /etc/fstab (pass != 0)
     (Closes: #797361)
   * [371221b] hooks/fsck: Use 'command' to find fsck.<type> (Closes: #784234)
   * [e352b94] scripts/functions: Use blkid to resolve LABEL= and UUID= block
     device IDs
   * [7469eee] scripts/functions: Handle PARTLABEL= and PARTUUID= block device
     IDs using blkid (Closes: #801154)
   * [fe30453] hook-functions: Include drivers/nvme in block driver modules
     (Closes: #807000)
   * [fa1985b] update-initramfs: Run 'sync' after writing the initramfs
     (Closes: #783620)
   * [6a40a89] hook-functions: Introduce copy_file function
   * [a7fc630] Use copy_file to copy config files and firmware, instead of
     copy_exec
   * [52ae50c] hook-functions: Use copy_file to install modules
   * [b215c18] Support multiple break points using a comma delimiter
     (Closes: #795832)
   * [b2dfbeb] Set emacs local variables to implement our shell coding style
   * [b1dc049] hook-functions: Preserve symlinks when copying files
     (Closes: #799443)
   * [319b141] hooks/fsck: Simplify by letting copy_exec handle symlinks
   * [143b9ef] maintainer-notes.html: Update changelog command lines to use
     'gbp dch'
   * [f01cdd4] debian/control: Ensure lockstep upgrade of initramfs-tools and
     -core
   * [88f7bb6] debian/TODO: Update for released and pending changes
   * [d136f22] scripts/local: Remove residual support for separate /etc
     filesystem
   * [14913b2] scripts/local: Name parameters to local_device_setup
   * [3080087] Defer resolving block device IDs to local_device_setup
   * [3574b56] scripts/functions: Stop resolving symlinks in resolve_device
     (Closes: #791754)
 .
   [ Laurent Bigonville ]
   * [27405fc] Support fsck.mode= and fsck.repair= parameters as known by
     systemd-fsck (Closes: #783410, #792557)
   * [8a2f298] Run new panic scripts just before dropping to a shell
     (Closes: #602331)
 .
   [ Boris Egorov ]
   * [c14d661] mkinitramfs: fix bashism in script (Closes: #633582)
 .
   [ Salvatore Bonaccorso ]
   * [f78c9a9] scripts/nfs: Check return value from nfs_mount_root_impl
     (Closes: #782641)
 .
   [ Roger Shimizu ]
   * [50aa8e2] advance the timing of insmod netconsole
   * [3acddcc] redirect debug info to netconsole (Closes: #793786)
 .
   [ Andy Whitcroft ]
   * [4ba741b] Add 2>&1 to the run-init line (Closes: #795831)
   * [1f5c193] When adding i8042 also add psmouse as some keyboards are behind
     the mouse (Closes: #795839)
 .
   [ Roger Leigh ]
   * [6a8d18b] init: Always migrate /run to the rootfs (Closes: #696632)
Checksums-Sha1: 
 637879afd5e58783b459e5d143925c36e6b3fd38 1827 initramfs-tools_0.121~rc2.dsc
 ae8241178fec79ee313b7047b895d11cb7841678 81796 initramfs-tools_0.121~rc2.tar.xz
 ca77d0e7dcee3156cfa17068d6d5b141c1cd8c19 91304 initramfs-tools-core_0.121~rc2_all.deb
 5c816122c238ea6c85e536dbd146e5bf42e1277d 61984 initramfs-tools_0.121~rc2_all.deb
Checksums-Sha256: 
 a843f037d009a716a05608e53358a91882acfee5abecd34d8b05370e6a75f60c 1827 initramfs-tools_0.121~rc2.dsc
 692f46cdb3d98463a39a24b3d6b73e90e1f8644f47898c42c9dfe421b0e17e1a 81796 initramfs-tools_0.121~rc2.tar.xz
 136b2361c60146f48473c074e0ab9322bb985fead530b7ff5c2047c2f37ad9f2 91304 initramfs-tools-core_0.121~rc2_all.deb
 0c95877a21a1d8518218e7790d90840f2fa1a8acf71c7862a49e10645852db0e 61984 initramfs-tools_0.121~rc2_all.deb
Files: 
 5a088b0402a552cb25a3d526b378b298 1827 utils optional initramfs-tools_0.121~rc2.dsc
 ee04e46be524b9dabe82422373e4f69d 81796 utils optional initramfs-tools_0.121~rc2.tar.xz
 4a5f88c08bca7db8f3bea5a2a0654042 91304 utils optional initramfs-tools-core_0.121~rc2_all.deb
 ba9a71555f1e2695e933984954f05946 61984 utils optional initramfs-tools_0.121~rc2_all.deb

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
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=0u0e
-----END PGP SIGNATURE-----

--- End Message ---

Reply to: