Bug#808720: linux-image-4.3.0-1-amd64: [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in has_drrs (expected 1, found 0)
Package: src:linux
Version: 4.3.3-2
Severity: important
Dear Maintainer,
* What led up to the situation?
I've apt-get upgrade and dist-upgrade and autoremove.
Since then, an ERROR occured in boot process, and X couldn't start.
* What exactly did you do (or not do) that was effective (or
ineffective)?
In some days, I've done apt-get upgrade and dist-upgrade.
* What was the outcome of this action?
Situation does NOT change.
* What outcome did you expect instead?
Remove this bug, and start X correctly.
I paste dmesg log.
[ 3.125628] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in has_drrs (expected 1, found 0)
[ 3.125631] ------------[ cut here ]------------
[ 3.125677] WARNING: CPU: 3 PID: 201 at /build/linux-s8yg92/linux-4.3.3/drivers/gpu/drm/i915/intel_display.c:12700 intel_atomic_commit+0xd7a/0x12f0 [i915]()
[ 3.125678] pipe state doesn't match!
[ 3.125724] Modules linked in: rtsx_usb_ms rtsx_usb_sdmmc mmc_core memstick rtsx_usb ipheth binfmt_misc uvcvideo btusb videobuf2_vmalloc btrtl videobuf2_memops btbcm videobuf2_core v4l2_common btintel bluetooth videodev media intel_rapl iosf_mbi x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm joydev crct10dif_pclmul crc32_pclmul hid_multitouch usbhid jitterentropy_rng hid sha256_ssse3 iTCO_wdt sha256_generic hmac iTCO_vendor_support asus_nb_wmi asus_wmi sparse_keymap drbg arc4 ansi_cprng iwldvm snd_hda_codec_hdmi mac80211 aesni_intel snd_hda_codec_realtek snd_hda_codec_generic aes_x86_64 lrw gf128mul iwlwifi glue_helper ablk_helper cryptd i915 snd_hda_intel snd_hda_codec cfg80211 snd_hda_core evdev snd_hwdep psmouse snd_pcm drm_kms_helper i2c_i801 snd_timer serio_raw pcspkr lpc_ich snd
[ 3.125751] rfkill drm mfd_core soundcore sg shpchp mei_me int3403_thermal i2c_algo_bit mei battery tpm_tis video tpm int3402_thermal ac int340x_thermal_zone wmi int3400_thermal acpi_thermal_rel button processor loop parport_pc ppdev lp parport autofs4 ext4 crc16 mbcache jbd2 sd_mod crc32c_intel ahci libahci libata scsi_mod xhci_pci ehci_pci xhci_hcd ehci_hcd usbcore usb_common thermal fan
[ 3.125755] CPU: 3 PID: 201 Comm: kworker/3:2 Not tainted 4.3.0-1-amd64 #1 Debian 4.3.3-2
[ 3.125756] Hardware name: ASUSTeK COMPUTER INC. UX31A/UX31A, BIOS UX31A.218 01/31/2013
[ 3.125766] Workqueue: events output_poll_execute [drm_kms_helper]
[ 3.125770] 0000000000000000 00000000ffe833e6 ffffffff812ddc89 ffff880214cbfbb8
[ 3.125772] ffffffff81072b1d ffff8802128bec00 ffff880214cbfc10 ffff8800b7fc7000
[ 3.125774] ffff880214abb000 ffff880214a5f800 ffffffff81072bac ffffffffa063b2e2
[ 3.125775] Call Trace:
[ 3.125784] [<ffffffff812ddc89>] ? dump_stack+0x40/0x57
[ 3.125788] [<ffffffff81072b1d>] ? warn_slowpath_common+0x7d/0xb0
[ 3.125790] [<ffffffff81072bac>] ? warn_slowpath_fmt+0x5c/0x80
[ 3.125836] [<ffffffffa05ee81d>] ? intel_dp_get_hw_state+0x5d/0x160 [i915]
[ 3.125876] [<ffffffffa05cc60a>] ? intel_atomic_commit+0xd7a/0x12f0 [i915]
[ 3.125900] [<ffffffffa0322384>] ? drm_atomic_check_only+0x214/0x540 [drm]
[ 3.125910] [<ffffffffa03ef69f>] ? drm_atomic_helper_set_config+0x1af/0x410 [drm_kms_helper]
[ 3.125940] [<ffffffffa031273e>] ? drm_mode_set_config_internal+0x5e/0xf0 [drm]
[ 3.125949] [<ffffffffa03f23ca>] ? restore_fbdev_mode+0xaa/0x110 [drm_kms_helper]
[ 3.125957] [<ffffffffa03f4170>] ? drm_fb_helper_restore_fbdev_mode_unlocked+0x20/0x60 [drm_kms_helper]
[ 3.125964] [<ffffffffa03f41d9>] ? drm_fb_helper_set_par+0x29/0x50 [drm_kms_helper]
[ 3.125972] [<ffffffffa03f4109>] ? drm_fb_helper_hotplug_event+0xb9/0x100 [drm_kms_helper]
[ 3.125978] [<ffffffffa03e878b>] ? output_poll_execute+0x18b/0x1d0 [drm_kms_helper]
[ 3.125983] [<ffffffff8108a39f>] ? process_one_work+0x19f/0x3d0
[ 3.125985] [<ffffffff8108a61d>] ? worker_thread+0x4d/0x450
[ 3.125987] [<ffffffff8108a5d0>] ? process_one_work+0x3d0/0x3d0
[ 3.125991] [<ffffffff8109044d>] ? kthread+0xcd/0xf0
[ 3.125994] [<ffffffff81090380>] ? kthread_create_on_node+0x190/0x190
[ 3.125999] [<ffffffff815816cf>] ? ret_from_fork+0x3f/0x70
[ 3.126002] [<ffffffff81090380>] ? kthread_create_on_node+0x190/0x190
[ 3.126004] ---[ end trace 548e45f05d87dafa ]---
[ 3.128089] Console: switching to colour frame buffer device 240x67
[ 3.136189] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
-- Package-specific info:
** Version:
Linux version 4.3.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 5.3.1 20151207 (Debian 5.3.1-3) ) #1 SMP Debian 4.3.3-2 (2015-12-17)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.3.0-1-amd64 root=UUID=daff2f02-5f07-4cf3-8ab0-d50a8e40a863 ro quiet
** Tainted: W (512)
* Taint on warning.
** Kernel log:
[ 2968.951202] ipheth 3-1:4.2: Apple iPhone USB Ethernet now disconnected
[ 2969.511578] usb 3-1: new high-speed USB device number 16 using xhci_hcd
[ 2969.642562] usb 3-1: New USB device found, idVendor=05ac, idProduct=12a8
[ 2969.642572] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2969.642577] usb 3-1: Product: iPhone
[ 2969.642581] usb 3-1: Manufacturer: Apple Inc.
[ 2969.642586] usb 3-1: SerialNumber: 4349d3efe0752bc8a3dcd161f2dc68bc06b74eba
[ 2969.642997] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 2969.643011] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 2969.705759] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 2969.705768] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 2969.723907] ipheth 3-1:4.2: Apple iPhone USB Ethernet device attached
[ 2969.727526] ipheth 3-1:4.2 enx0e3e9f220949: renamed from eth0
[ 2969.762920] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 2969.763563] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 4248.131921] ipheth 3-1:4.2: ipheth_rcvbulk_callback: urb status: -71
[ 4248.134793] usb 3-1: USB disconnect, device number 16
[ 4248.161757] ipheth 3-1:4.2: Apple iPhone USB Ethernet now disconnected
[ 4248.818226] usb 3-1: new high-speed USB device number 17 using xhci_hcd
[ 4248.949881] usb 3-1: New USB device found, idVendor=05ac, idProduct=12a8
[ 4248.949890] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4248.949894] usb 3-1: Product: iPhone
[ 4248.949898] usb 3-1: Manufacturer: Apple Inc.
[ 4248.949901] usb 3-1: SerialNumber: 4349d3efe0752bc8a3dcd161f2dc68bc06b74eba
[ 4248.950260] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4248.950272] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4249.012243] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4249.012250] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4249.013549] ipheth 3-1:4.2: Apple iPhone USB Ethernet device attached
[ 4249.017135] ipheth 3-1:4.2 enx0e3e9f220949: renamed from eth0
[ 4249.053792] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 4249.054284] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 4251.791497] ipheth 3-1:4.2: ipheth_rcvbulk_callback: urb status: -71
[ 4251.794422] usb 3-1: USB disconnect, device number 17
[ 4251.816747] ipheth 3-1:4.2: Apple iPhone USB Ethernet now disconnected
[ 4252.313216] usb 3-1: new high-speed USB device number 18 using xhci_hcd
[ 4252.444019] usb 3-1: New USB device found, idVendor=05ac, idProduct=12a8
[ 4252.444028] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4252.444033] usb 3-1: Product: iPhone
[ 4252.444037] usb 3-1: Manufacturer: Apple Inc.
[ 4252.444041] usb 3-1: SerialNumber: 4349d3efe0752bc8a3dcd161f2dc68bc06b74eba
[ 4252.444405] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4252.444417] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4252.499460] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4252.499472] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 4252.501715] ipheth 3-1:4.2: Apple iPhone USB Ethernet device attached
[ 4252.509399] ipheth 3-1:4.2 enx0e3e9f220949: renamed from eth0
[ 4252.542883] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 4252.543546] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 5988.088204] ipheth 3-1:4.2: ipheth_rcvbulk_callback: urb status: -71
[ 5988.097392] usb 3-1: USB disconnect, device number 18
[ 5988.124516] ipheth 3-1:4.2: Apple iPhone USB Ethernet now disconnected
[ 5989.261475] usb 3-1: new high-speed USB device number 19 using xhci_hcd
[ 5989.392421] usb 3-1: New USB device found, idVendor=05ac, idProduct=12a8
[ 5989.392436] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5989.392445] usb 3-1: Product: iPhone
[ 5989.392451] usb 3-1: Manufacturer: Apple Inc.
[ 5989.392459] usb 3-1: SerialNumber: 4349d3efe0752bc8a3dcd161f2dc68bc06b74eba
[ 5989.392793] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 5989.392804] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 5989.456190] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 5989.456208] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 5989.458276] ipheth 3-1:4.2: Apple iPhone USB Ethernet device attached
[ 5989.465893] ipheth 3-1:4.2 enx0e3e9f220949: renamed from eth0
[ 5989.497044] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 5989.497762] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 5998.580079] ipheth 3-1:4.2: ipheth_rcvbulk_callback: urb status: -71
[ 5998.589836] usb 3-1: USB disconnect, device number 19
[ 5998.609484] ipheth 3-1:4.2: Apple iPhone USB Ethernet now disconnected
[ 5999.558062] usb 3-1: new high-speed USB device number 20 using xhci_hcd
[ 5999.689447] usb 3-1: New USB device found, idVendor=05ac, idProduct=12a8
[ 5999.689467] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5999.689484] usb 3-1: Product: iPhone
[ 5999.689491] usb 3-1: Manufacturer: Apple Inc.
[ 5999.689500] usb 3-1: SerialNumber: 4349d3efe0752bc8a3dcd161f2dc68bc06b74eba
[ 5999.689960] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 5999.689986] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 5999.744813] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 5999.744821] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 5999.746800] ipheth 3-1:4.2: Apple iPhone USB Ethernet device attached
[ 5999.755599] ipheth 3-1:4.2 enx0e3e9f220949: renamed from eth0
[ 5999.794458] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 5999.795053] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 6773.528505] ipheth 3-1:4.2: ipheth_rcvbulk_callback: urb status: -71
[ 6773.532631] usb 3-1: USB disconnect, device number 20
[ 6773.555390] ipheth 3-1:4.2: Apple iPhone USB Ethernet now disconnected
[ 6774.019825] usb 3-1: new high-speed USB device number 21 using xhci_hcd
[ 6774.150218] usb 3-1: New USB device found, idVendor=05ac, idProduct=12a8
[ 6774.150228] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 6774.150233] usb 3-1: Product: iPhone
[ 6774.150237] usb 3-1: Manufacturer: Apple Inc.
[ 6774.150240] usb 3-1: SerialNumber: 4349d3efe0752bc8a3dcd161f2dc68bc06b74eba
[ 6774.150607] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 6774.150619] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 6774.214383] usb 3-1: ep 0x2 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 6774.214400] usb 3-1: ep 0x81 - rounding interval to 8 microframes, ep desc says 10 microframes
[ 6774.217042] ipheth 3-1:4.2: Apple iPhone USB Ethernet device attached
[ 6774.222805] ipheth 3-1:4.2 enx0e3e9f220949: renamed from eth0
[ 6774.246187] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
[ 6774.248102] IPv6: ADDRCONF(NETDEV_UP): enx0e3e9f220949: link is not ready
** Model information
sys_vendor: ASUSTeK COMPUTER INC.
product_name: UX31A
product_version: 1.0
chassis_vendor: ASUSTeK COMPUTER INC.
chassis_version: 1.0
bios_vendor: American Megatrends Inc.
bios_version: UX31A.218
board_vendor: ASUSTeK COMPUTER INC.
board_name: UX31A
board_version: 1.0
** Loaded modules:
ctr
ccm
rtsx_usb_ms
rtsx_usb_sdmmc
mmc_core
memstick
rtsx_usb
ipheth
binfmt_misc
uvcvideo
btusb
videobuf2_vmalloc
btrtl
videobuf2_memops
btbcm
videobuf2_core
v4l2_common
btintel
bluetooth
videodev
media
intel_rapl
iosf_mbi
x86_pkg_temp_thermal
intel_powerclamp
coretemp
kvm_intel
kvm
joydev
crct10dif_pclmul
crc32_pclmul
hid_multitouch
usbhid
jitterentropy_rng
hid
sha256_ssse3
iTCO_wdt
sha256_generic
hmac
iTCO_vendor_support
asus_nb_wmi
asus_wmi
sparse_keymap
drbg
arc4
ansi_cprng
iwldvm
snd_hda_codec_hdmi
mac80211
aesni_intel
snd_hda_codec_realtek
snd_hda_codec_generic
aes_x86_64
lrw
gf128mul
iwlwifi
glue_helper
ablk_helper
cryptd
i915
snd_hda_intel
snd_hda_codec
cfg80211
snd_hda_core
evdev
snd_hwdep
psmouse
snd_pcm
drm_kms_helper
i2c_i801
snd_timer
serio_raw
pcspkr
lpc_ich
snd
rfkill
drm
mfd_core
soundcore
sg
shpchp
mei_me
int3403_thermal
i2c_algo_bit
mei
battery
tpm_tis
video
tpm
int3402_thermal
ac
int340x_thermal_zone
wmi
int3400_thermal
acpi_thermal_rel
button
processor
loop
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
sd_mod
crc32c_intel
ahci
libahci
libata
scsi_mod
xhci_pci
ehci_pci
xhci_hcd
ehci_hcd
usbcore
usb_common
thermal
fan
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet dhcp
auto wlan0
iface wlan0 inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
iface home inet dhcp
iface tim5f inet dhcp
iface tim2f inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether c4:85:08:ad:a6:74 brd ff:ff:ff:ff:ff:ff
inet 192.168.10.100/24 brd 192.168.10.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::c685:8ff:fead:a674/64 scope link
valid_lft forever preferred_lft forever
19: enx0e3e9f220949: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN group default qlen 1000
link/ether 0e:3e:9f:22:09:49 brd ff:ff:ff:ff:ff:ff
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
wlan0: 474857937 336170 0 0 0 0 0 0 18269892 188601 0 0 0 0 0 0
lo: 1312212 4444 0 0 0 0 0 0 1312212 4444 0 0 0 0 0 0
enx0e3e9f220949: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
326314 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
320822 incoming packets delivered
189158 requests sent out
2 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
0 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
Tcp:
113 active connections openings
77 passive connection openings
2 failed connection attempts
2 connection resets received
0 connections established
313744 segments received
188425 segments send out
0 segments retransmited
0 bad segments received.
2 resets sent
Udp:
966 packets received
0 packets to unknown port received.
0 packet receive errors
802 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 6234
UdpLite:
TcpExt:
14 packets pruned from receive queue because of socket buffer overrun
104 TCP sockets finished time wait in fast timer
346 delayed acks sent
7 delayed acks further delayed because of locked socket
Quick ack mode was activated 1 times
4 packets directly queued to recvmsg prequeue.
275759 packet headers predicted
355 acknowledgments not containing data payload received
153 predicted acknowledgments
133 packets collapsed in receive queue due to low socket buffer
TCPDSACKOldSent: 1
TCPRcvCoalesce: 93592
TCPOFOQueue: 29007
TCPAutoCorking: 9
TCPToZeroWindowAdv: 2
TCPWantZeroWindowAdv: 108
TCPOrigDataSent: 651
IpExt:
InMcastPkts: 683
OutMcastPkts: 50
InBcastPkts: 6179
OutBcastPkts: 84
InOctets: 468640916
OutOctets: 10386204
InMcastOctets: 133633
OutMcastOctets: 4221
InBcastOctets: 614221
OutBcastOctets: 3976
InNoECTPkts: 326314
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f7800000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at f000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:04.0 Signal processing controller [1180]: Intel Corporation 3rd Gen Core Processor Thermal Subsystem [8086:0153] (rev 09)
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at dfe08000 (64-bit, non-prefetchable) [size=32K]
Capabilities: <access denied>
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 26
Region 0: Memory at f7d00000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f7d22000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f7d20000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: ASUSTeK Computer Inc. Device [1043:100f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f7d18000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: f7c00000-f7cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f7d1f000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM76 Express Chipset LPC Controller [8086:1e59] (rev 04)
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at f0b0 [size=8]
Region 1: I/O ports at f0a0 [size=4]
Region 2: I/O ports at f090 [size=8]
Region 3: I/O ports at f080 [size=4]
Region 4: I/O ports at f060 [size=32]
Region 5: Memory at f7d1e000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 0
Region 0: Memory at f7d1d000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f040 [size=32]
00:1f.6 Signal processing controller [1180]: Intel Corporation 7 Series/C210 Series Chipset Family Thermal Management Controller [8086:1e24] (rev 04)
Subsystem: ASUSTeK Computer Inc. Zenbook Prime UX31A [1043:1517]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 10
Region 0: Memory at f7d1c000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
02:00.0 Network controller [0280]: Intel Corporation Centrino Advanced-N 6235 [8086:088e] (rev 24)
Subsystem: Intel Corporation Centrino Advanced-N 6235 AGN [8086:4060]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f7c00000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
** USB devices:
Bus 002 Device 004: ID 8087:07da Intel Corp.
Bus 002 Device 003: ID 04f2:b368 Chicony Electronics Co., Ltd
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:0139 Realtek Semiconductor Corp. RTS5139 Card Reader Controller
Bus 001 Device 003: ID 0eef:7908 D-WAV Scientific Co., Ltd
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 021: ID 05ac:12a8 Apple, Inc. iPhone5/5C/5S/6
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers unstable
APT policy: (500, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.3.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=C, LC_CTYPE=C (charmap=ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.3.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.58
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 22-1
ii linux-base 4.0
Versions of packages linux-image-4.3.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.0.9-1
Versions of packages linux-image-4.3.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.03+dfsg-11
ii grub-pc 2.02~beta2-33
pn linux-doc-4.3 <none>
Versions of packages linux-image-4.3.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 20151207-1
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.3.0-1-amd64/postinst/mips-initrd-4.3.0-1-amd64:
linux-image-4.3.0-1-amd64/postinst/depmod-error-initrd-4.3.0-1-amd64: false
linux-image-4.3.0-1-amd64/prerm/removing-running-kernel-4.3.0-1-amd64: true
Reply to: