--- Begin Message ---
- To: Debian Bug Tracking System <submit@bugs.debian.org>
- Subject: linux-image-3.13-1-powerpc-smp: dpkg reports errors during installation via aptitude
- From: Mehul Sanghvi <mehul.sanghvi@gmail.com>
- Date: Fri, 14 Mar 2014 16:02:45 -0400
- Message-id: <20140314200245.1064.15966.reportbug@tatooine.sanghvi.org>
Package: src:linux
Version: 3.13.5-1
Severity: normal
Dear Maintainer,
I get the following when I try to do an upgrade:
root# aptitude install linux-image-powerpc-smp
The following partially installed packages will be configured:
linux-image-3.13-1-powerpc-smp linux-image-powerpc-smp
No packages will be installed, upgraded, or removed.
0 packages upgraded, 0 newly installed, 0 to remove and 96 not
upgraded.
Need to get 0 B of archives. After unpacking 0 B will be used.
Setting up linux-image-3.13-1-powerpc-smp (3.13.5-1) ...
vmlinux(/boot/vmlinux-3.13-1-powerpc-smp
) points to /boot/vmlinux-3.13-1-powerpc-smp
(/boot/vmlinux-3.13-1-powerpc-smp) -- doing nothing at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 263.
initrd.img(/boot/initrd.img-3.13-1-powerpc-smp
) points to /boot/initrd.img-3.13-1-powerpc-smp
(/boot/initrd.img-3.13-1-powerpc-smp) -- doing nothing at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 263.
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-3.13-1-powerpc-smp
run-parts: /etc/kernel/postinst.d/mkvmlinuz exited with return code 20
Failed to process /etc/kernel/postinst.d at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 591.
dpkg: error processing package linux-image-3.13-1-powerpc-smp
(--configure):
subprocess installed post-installation script returned error exit
status 1
dpkg: dependency problems prevent configuration of
linux-image-powerpc-smp:
linux-image-powerpc-smp depends on linux-image-3.13-1-powerpc-smp;
however:
Package linux-image-3.13-1-powerpc-smp is not configured yet.
dpkg: error processing package linux-image-powerpc-smp (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-3.13-1-powerpc-smp
linux-image-powerpc-smp
E: Sub-process /usr/bin/dpkg returned an error code (1)
Failed to perform requested operation on package. Trying to recover:
Setting up linux-image-3.13-1-powerpc-smp (3.13.5-1) ...
vmlinux(/boot/vmlinux-3.13-1-powerpc-smp
) points to /boot/vmlinux-3.13-1-powerpc-smp
(/boot/vmlinux-3.13-1-powerpc-smp) -- doing nothing at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 263.
initrd.img(/boot/initrd.img-3.13-1-powerpc-smp
) points to /boot/initrd.img-3.13-1-powerpc-smp
(/boot/initrd.img-3.13-1-powerpc-smp) -- doing nothing at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 263.
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-3.13-1-powerpc-smp
run-parts: /etc/kernel/postinst.d/mkvmlinuz exited with return code 20
Failed to process /etc/kernel/postinst.d at
/var/lib/dpkg/info/linux-image-3.13-1-powerpc-smp.postinst line 591.
dpkg: error processing package linux-image-3.13-1-powerpc-smp
(--configure):
subprocess installed post-installation script returned error exit
status 1
dpkg: dependency problems prevent configuration of
linux-image-powerpc-smp:
linux-image-powerpc-smp depends on linux-image-3.13-1-powerpc-smp;
however:
Package linux-image-3.13-1-powerpc-smp is not configured yet.
dpkg: error processing package linux-image-powerpc-smp (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
linux-image-3.13-1-powerpc-smp
linux-image-powerpc-smp
-- Package-specific info:
** Kernel log: boot messages should be attached
** Model information
revision : 2.9 (pvr 000c 0209)
revision : 2.9 (pvr 000c 0209)
platform : PowerMac
model : PowerMac3,3
machine : PowerMac3,3
motherboard : PowerMac3,3 MacRISC2 MacRISC Power Macintosh
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
iface eth0 inet static
address 192.168.70.1
broadcast 192.168.70.0
netmask 255.255.255.0
gateway 192.168.70.20
** PCI devices:
0000:00:0b.0 Host bridge [0600]: Apple Inc. UniNorth AGP [106b:0020]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Capabilities: <access denied>
Kernel driver in use: agpgart-uninorth
0000:00:10.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Rage 128 PRO AGP 4x TMDS [1002:5046] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 255 (2000ns min), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 48
Region 0: Memory at 94000000 (32-bit, prefetchable) [size=64M]
Region 1: I/O ports at 0400 [size=256]
Region 2: Memory at 90000000 (32-bit, non-prefetchable) [size=16K]
Expansion ROM at 90020000 [size=128K]
Capabilities: <access denied>
Kernel driver in use: aty128fb
0001:10:0b.0 Host bridge [0600]: Apple Inc. UniNorth PCI [106b:001f]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0001:10:0d.0 PCI bridge [0604]: Digital Equipment Corporation DECchip 21154 [1011:0026] (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32, Cache Line Size: 32 bytes
Bus: primary=10, secondary=11, subordinate=11, sec-latency=32
Memory behind bridge: 80000000-800fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
0001:11:07.0 Unassigned class [ff00]: Apple Inc. KeyLargo Mac I/O [106b:0022] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
Region 0: Memory at 80000000 (32-bit, non-prefetchable) [size=512K]
Kernel driver in use: macio
0001:11:08.0 USB controller [0c03]: Apple Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 27
Region 0: Memory at 80082000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
0001:11:09.0 USB controller [0c03]: Apple Inc. KeyLargo USB [106b:0019] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (750ns min, 21500ns max)
Interrupt: pin A routed to IRQ 28
Region 0: Memory at 80081000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
0001:11:0a.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB12LV26 IEEE-1394 Controller (Link) [104c:8020] (prog-if 10 [OHCI])
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 16 (500ns min, 1000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 63
Region 0: Memory at 80080000 (32-bit, non-prefetchable) [size=2K]
Region 1: Memory at 80084000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
0002:21:0b.0 Host bridge [0600]: Apple Inc. UniNorth Internal PCI [106b:001e]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 16, Cache Line Size: 32 bytes
0002:21:0f.0 Ethernet controller [0200]: Apple Inc. UniNorth GMAC (Sun GEM) [106b:0021] (rev 01)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
Latency: 16 (16000ns min, 16000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 41
Region 0: Memory at f5200000 (32-bit, non-prefetchable) [size=2M]
Expansion ROM at f5000000 [disabled] [size=1M]
Kernel driver in use: gem
** USB devices:
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 05a4:9861 Ortek Technology, Inc.
Bus 001 Device 007: ID 046d:c03d Logitech, Inc. M-BT96a Pilot Optical Mouse
Bus 001 Device 002: ID 05a4:9836 Ortek Technology, Inc.
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: jessie/sid
APT prefers testing
APT policy: (990, 'testing')
Architecture: powerpc (ppc)
Kernel: Linux 3.12-1-powerpc-smp (SMP w/2 CPU cores)
Locale: LANG=en_US, LC_CTYPE=en_US (charmap=ISO-8859-1)
Shell: /bin/sh linked to /bin/dash
Versions of packages linux-image-3.13-1-powerpc-smp depends on:
ii debconf [debconf-2.0] 1.5.52
ii initramfs-tools [linux-initramfs-tool] 0.115
ii kmod 16-2
ii linux-base 3.5
ii module-init-tools 16-2
Versions of packages linux-image-3.13-1-powerpc-smp recommends:
ii firmware-linux-free 3.3
Versions of packages linux-image-3.13-1-powerpc-smp suggests:
pn debian-kernel-handbook <none>
pn linux-doc-3.13 <none>
ii mkvmlinuz 36
Versions of packages linux-image-3.13-1-powerpc-smp is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.41
ii firmware-linux-nonfree 0.41
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.13-1-powerpc-smp/prerm/removing-running-kernel-3.13-1-powerpc-smp: true
linux-image-3.13-1-powerpc-smp/postinst/depmod-error-initrd-3.13-1-powerpc-smp: false
--- End Message ---
--- Begin Message ---
Source: mkvmlinuz
Source-Version: 37+deb8u1
We believe that the bug you reported is fixed in the latest version of
mkvmlinuz, which is due to be installed in the Debian FTP archive.
A summary of the changes between this version and the previous one is
attached.
Thank you for reporting the bug, which will now be closed. If you
have further comments please address them to 741642@bugs.debian.org,
and the maintainer will reopen the bug report if appropriate.
Debian distribution maintenance software
pp.
Milan Kupcevic <milan@physics.harvard.edu> (supplier of updated mkvmlinuz package)
(This message was generated automatically at their request; if you
believe that there is a problem with it please contact the archive
administrators by mailing ftpmaster@ftp-master.debian.org)
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA256
Format: 1.8
Date: Thu, 23 Jul 2015 23:00:46 -0400
Source: mkvmlinuz
Binary: mkvmlinuz
Architecture: source powerpc
Version: 37+deb8u1
Distribution: stable
Urgency: medium
Maintainer: Debian Kernel Team <debian-kernel@lists.debian.org>
Changed-By: Milan Kupcevic <milan@physics.harvard.edu>
Description:
mkvmlinuz - create a kernel to boot a PowerPC machine from Open Firmware
Closes: 741642
Changes:
mkvmlinuz (37+deb8u1) stable; urgency=medium
.
* Push run-parts output to stderr. (Closes: #741642)
Checksums-Sha1:
a90b78136690f1b7b2bf2963bf4cb54cfb676235 1539 mkvmlinuz_37+deb8u1.dsc
91e6a561e18276b60e2c46c26893097958779793 52844 mkvmlinuz_37+deb8u1.tar.xz
8b55499eb0c17f9eacb1fba7173e1501969aadec 59618 mkvmlinuz_37+deb8u1_powerpc.deb
Checksums-Sha256:
100fe9fd8fd6469536f9cf449fba5b1f645b610a19bb483b5c8090df066d1888 1539 mkvmlinuz_37+deb8u1.dsc
a6e055fea66471858800ad6fd7f38c623fc26739488fc5dd31f0b51acd8e8b3d 52844 mkvmlinuz_37+deb8u1.tar.xz
a249adf9f137a913b792d60d7d5bdcd7b510cd0728b61230645a582d4ab4af9a 59618 mkvmlinuz_37+deb8u1_powerpc.deb
Files:
902f543c54b105bc44a4030b23477c06 1539 utils optional mkvmlinuz_37+deb8u1.dsc
5c94a5e93aeca02bca262086daeab8e7 52844 utils optional mkvmlinuz_37+deb8u1.tar.xz
e7d252eb562a2fccbcc3f47d77c2da25 59618 utils optional mkvmlinuz_37+deb8u1_powerpc.deb
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=4MQo
-----END PGP SIGNATURE-----
--- End Message ---