Bug#774538: linux-image-3.16.0-4-amd64: No sound card detected on HP laptop w/ AMD ATI Azalia sound card (Intel HDA)
Package: src:linux
Version: 3.16.7-ckt11-1+deb8u5
Followup-For: Bug #774538
Dear Maintainer,
I have already reported this bug https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=749325
and here is a more complete report, sent from the same system that exhibits the bug.
No sound card is detected, although it works seamlessly under wheezy. I can see
there is a similar bug reported under https://lists.debian.org/debian-kernel/2014/10/msg00431.html
As opposed to my previous installs, made from Debian CD's, this one is an upgrade
from wheezy, but still no sound. I'm out of ideas.
Regards,
Klistvud
-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1+deb8u5 (2015-10-09)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=8c4eb7a3-36f0-40c7-9078-6ebcb6d554ae ro atkbd.softraw=0 quiet
** Not tainted
** Kernel log:
[ 8.974712] [drm] Encoders:
[ 8.974716] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 8.974720] [drm] Connector 1:
[ 8.974723] [drm] LVDS-1
[ 8.974728] [drm] DDC: 0x7e40 0x7e50 0x7e44 0x7e54 0x7e48 0x7e58 0x7e4c 0x7e5c
[ 8.974731] [drm] Encoders:
[ 8.974735] [drm] LCD1: INTERNAL_LVTM1
[ 8.974738] [drm] Connector 2:
[ 8.974741] [drm] SVIDEO-1
[ 8.974744] [drm] Encoders:
[ 8.974747] [drm] TV1: INTERNAL_KLDSCP_DAC1
[ 9.319224] ppdev: user-space parallel port driver
[ 9.342770] b43-phy0: Broadcom 4321 WLAN found (core revision 12)
[ 9.372196] b43-phy0: Found PHY: Analog 5, Type 4 (N), Revision 2
[ 9.372232] b43-phy0 warning: 5 GHz band is unsupported on this PHY
[ 9.384238] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 9.409763] input: HP WMI hotkeys as /devices/virtual/input/input16
[ 9.417626] b43 ssb0:0: firmware: direct-loading firmware b43/ucode11.fw
[ 9.422784] b43 ssb0:0: firmware: direct-loading firmware b43/n0initvals11.fw
[ 9.434245] b43 ssb0:0: firmware: direct-loading firmware b43/n0bsinitvals11.fw
[ 9.490244] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 9.519564] snd_hda_intel 0000:00:14.2: CORB reset timeout#1, CORBRP = 0
[ 9.519636] snd_hda_intel 0000:00:14.2: no codecs found!
[ 9.624919] [drm] fb mappable at 0xC0040000
[ 9.624930] [drm] vram apper at 0xC0000000
[ 9.624934] [drm] size 7258112
[ 9.624939] [drm] fb depth is 24
[ 9.624942] [drm] pitch is 6912
[ 9.625216] fbcon: radeondrmfb (fb0) is primary device
[ 9.721882] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 9.721912] excluding 0xc0000-0xfffff
[ 9.721948] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 9.721969] clean.
[ 9.722002] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 9.722025] excluding 0x60000000-0x60ffffff
[ 9.906075] Console: switching to colour frame buffer device 210x65
[ 9.930916] radeon 0000:01:05.0: fb0: radeondrmfb frame buffer device
[ 9.930925] radeon 0000:01:05.0: registered panic notifier
[ 9.948155] [drm] Initialized radeon 2.39.0 20080528 for 0000:01:05.0 on minor 0
[ 11.023375] cfg80211: World regulatory domain updated:
[ 11.023384] cfg80211: DFS Master region: unset
[ 11.023387] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 11.023391] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.023395] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.023398] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.023401] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 11.023405] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 11.023408] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 11.023411] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 11.023414] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 14.910108] WARNING! power/level is deprecated; use power/control instead
[ 15.043221] Bluetooth: Core ver 2.19
[ 15.043293] NET: Registered protocol family 31
[ 15.043299] Bluetooth: HCI device and connection manager initialized
[ 15.043866] Bluetooth: HCI socket layer initialized
[ 15.043876] Bluetooth: L2CAP socket layer initialized
[ 15.043918] Bluetooth: SCO socket layer initialized
[ 15.105503] usbcore: registered new interface driver btusb
[ 16.174011] Adding 2101244k swap on /dev/sda1. Priority:-1 extents:1 across:2101244k FS
[ 16.271028] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 16.479095] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 17.192116] lp0: using parport0 (interrupt-driven).
[ 17.313155] fuse init (API version 7.23)
[ 17.351057] loop: module loaded
[ 17.464091] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 18.394086] tg3 0000:10:00.0: irq 44 for MSI/MSI-X
[ 18.425269] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 19.008761] RPC: Registered named UNIX socket transport module.
[ 19.008775] RPC: Registered udp transport module.
[ 19.008780] RPC: Registered tcp transport module.
[ 19.008784] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 19.039494] FS-Cache: Loaded
[ 19.105314] FS-Cache: Netfs 'nfs' registered for caching
[ 19.300481] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 20.725047] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input17
[ 24.885295] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.885309] Bluetooth: BNEP filters: protocol multicast
[ 24.885340] Bluetooth: BNEP socket layer initialized
[ 32.136143] thermal LNXTHERM:00: registered as thermal_zone0
[ 32.136149] ACPI: Thermal Zone [TZ1] (76 C)
[ 33.136064] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 33.241332] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.260055] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 40.365001] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 40.777324] tg3 0000:10:00.0: irq 44 for MSI/MSI-X
[ 40.820195] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 41.204057] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 41.309106] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 43.338162] wlan0: authenticate with d8:5d:4c:aa:a9:50
[ 43.348184] wlan0: send auth to d8:5d:4c:aa:a9:50 (try 1/3)
[ 43.349593] wlan0: authenticated
[ 43.349617] b43 ssb0:0 wlan0: disabling HT as WMM/QoS is not supported by the AP
[ 43.349620] b43 ssb0:0 wlan0: disabling VHT as WMM/QoS is not supported by the AP
[ 43.352158] wlan0: associate with d8:5d:4c:aa:a9:50 (try 1/3)
[ 43.354292] wlan0: RX AssocResp from d8:5d:4c:aa:a9:50 (capab=0x421 status=0 aid=1)
[ 43.354741] wlan0: associated
[ 43.354784] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 69.557785] Bluetooth: RFCOMM TTY layer initialized
[ 69.557808] Bluetooth: RFCOMM socket layer initialized
[ 69.557818] Bluetooth: RFCOMM ver 1.11
** Model information
sys_vendor: Hewlett-Packard
product_name: HP Compaq 6715b (RK154AV)
product_version: F.07
chassis_vendor: Hewlett-Packard
chassis_version:
bios_vendor: Hewlett-Packard
bios_version: 68YTT Ver. F.07
board_vendor: Hewlett-Packard
board_name: 30C2
board_version: KBC Version 71.28
** Loaded modules:
rfcomm
thermal
cpufreq_stats
cpufreq_powersave
cpufreq_conservative
cpufreq_userspace
bnep
autofs4
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
loop
fuse
lp
ecb
btusb
bluetooth
6lowpan_iphc
joydev
arc4
snd_hda_intel
snd_hda_controller
b43
ppdev
hp_wmi
sparse_keymap
bcma
snd_hda_codec
powernow_k8
radeon
kvm_amd
mac80211
snd_hwdep
cfg80211
kvm
edac_mce_amd
snd_pcm
pcspkr
snd_timer
k8temp
snd
yenta_socket
pcmcia_rsrc
rfkill
rng_core
ttm
psmouse
evdev
serio_raw
edac_core
soundcore
sp5100_tco
drm_kms_helper
i2c_piix4
drm
hp_accel
lis3lv02d
parport_pc
wmi
tpm_infineon
i2c_algo_bit
i2c_core
parport
input_polldev
button
tpm_tis
tpm
ac
video
battery
shpchp
processor
ext4
crc16
mbcache
jbd2
sd_mod
crc_t10dif
crct10dif_generic
sg
sr_mod
cdrom
crct10dif_common
ata_generic
firewire_ohci
firewire_core
crc_itu_t
pata_atiixp
tg3
ptp
pps_core
libphy
fan
thermal_sys
ahci
ohci_pci
libahci
ssb
libata
scsi_mod
ehci_pci
ohci_hcd
ehci_hcd
usbcore
usb_common
mmc_core
pcmcia
pcmcia_core
** Network interface configuration:
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
link/ether 00:1a:4b:71:f6:ff brd ff:ff:ff:ff:ff:ff
3: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:1a:73:d2:82:fb brd ff:ff:ff:ff:ff:ff
inet 192.168.1.66/24 brd 192.168.1.255 scope global wlan0
valid_lft forever preferred_lft forever
inet6 fe80::21a:73ff:fed2:82fb/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
eth0: 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
wlan0: 4038251 5049 0 0 0 0 0 0 554784 4200 0 0 0 0 0 0
lo: 6955 59 0 0 0 0 0 0 6955 59 0 0 0 0 0 0
*** Protocol statistics:
Ip:
4577 total packets received
2 with invalid addresses
0 forwarded
0 incoming packets discarded
4559 incoming packets delivered
3993 requests sent out
28 dropped because of missing route
Icmp:
1 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
destination unreachable: 1
1 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 1
IcmpMsg:
InType3: 1
OutType3: 1
Tcp:
117 active connections openings
2 passive connection openings
14 failed connection attempts
2 connection resets received
0 connections established
4234 segments received
3648 segments send out
11 segments retransmited
0 bad segments received.
48 resets sent
Udp:
342 packets received
1 packets to unknown port received.
0 packet receive errors
362 packets sent
UdpLite:
TcpExt:
27 TCP sockets finished time wait in fast timer
70 delayed acks sent
Quick ack mode was activated 1 times
269 packets directly queued to recvmsg prequeue.
32893 bytes directly received in process context from prequeue
2237 packet headers predicted
38 packets header predicted and directly queued to user
390 acknowledgments not containing data payload received
415 predicted acknowledgments
4 times recovered from packet loss by selective acknowledgements
1 congestion windows recovered without slow start after partial ack
4 fast retransmits
1 forward retransmits
1 other TCP timeouts
TCPLossProbes: 4
TCPLossProbeRecovery: 2
1 SACK retransmits failed
1 DSACKs sent for old packets
1 DSACKs received
12 connections reset due to unexpected data
2 connections reset due to early user close
TCPDSACKIgnoredNoUndo: 1
TCPSackShiftFallback: 10
TCPRcvCoalesce: 539
TCPOFOQueue: 661
TCPAutoCorking: 21
TCPSynRetrans: 1
TCPOrigDataSent: 949
IpExt:
InMcastPkts: 97
OutMcastPkts: 87
InOctets: 3949970
OutOctets: 407916
InMcastOctets: 8235
OutMcastOctets: 7931
InNoECTPkts: 4577
** PCI devices:
00:00.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 Host Bridge [1002:7910]
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 64
00:01.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (Internal gfx) [1002:7912] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: d0400000-d05fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000c7ffffff
Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:04.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:7914] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=10, subordinate=10, sec-latency=0
Memory behind bridge: d0000000-d00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:05.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 1) [1002:7915] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=20, subordinate=20, sec-latency=0
I/O behind bridge: 00002000-00003fff
Memory behind bridge: cc000000-cfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:06.0 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] RS690 PCI to PCI Bridge (PCI Express Port 2) [1002:7916] (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=30, subordinate=30, sec-latency=0
Memory behind bridge: c8100000-c81fffff
Prefetchable memory behind bridge: 00000000c8000000-00000000c80fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:12.0 SATA controller [0106]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA [1002:4380] (prog-if 01 [AHCI 1.0])
Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] SB600 Non-Raid-5 SATA [1002:4380]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 9000 [size=8]
Region 1: I/O ports at 9008 [size=4]
Region 2: I/O ports at 9010 [size=8]
Region 3: I/O ports at 5018 [size=4]
Region 4: I/O ports at 5020 [size=16]
Region 5: Memory at d0609000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:13.0 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI0) [1002:4387] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 23
Region 0: Memory at d0601000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.1 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI1) [1002:4388] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0602000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.2 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI2) [1002:4389] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at d0603000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.3 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI3) [1002:438a] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at d0604000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.4 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB (OHCI4) [1002:438b] (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin C routed to IRQ 17
Region 0: Memory at d0605000 (32-bit, non-prefetchable) [size=4K]
Kernel driver in use: ohci-pci
00:13.5 USB controller [0c03]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 USB Controller (EHCI) [1002:4386] (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin D routed to IRQ 23
Region 0: Memory at d0606000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:14.0 SMBus [0c05]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 SMBus Controller [1002:4385] (rev 14)
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: I/O ports at 8200 [size=16]
Capabilities: <access denied>
Kernel driver in use: piix4_smbus
00:14.1 IDE interface [0101]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 IDE [1002:438c] (prog-if 82 [Master PriP])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 5040 [size=16]
Kernel driver in use: pata_atiixp
00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA) [1002:4383]
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at 100000000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:14.3 ISA bridge [0601]: Advanced Micro Devices, Inc. [AMD/ATI] SB600 PCI to LPC Bridge [1002:438d]
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
00:14.4 PCI bridge [0604]: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 PCI to PCI Bridge [1002:4384] (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+ ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64
Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
I/O behind bridge: 00001000-00001fff
Memory behind bridge: d0100000-d03fffff
Prefetchable memory behind bridge: 80000000-83ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:18.0 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
00:18.1 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.2 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:18.3 Host bridge [0600]: Advanced Micro Devices, Inc. [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: <access denied>
Kernel driver in use: k8temp
01:05.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RS690M [Radeon Xpress 1200/1250/1270] [1002:791f] (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 43
Region 0: Memory at c0000000 (64-bit, prefetchable) [size=128M]
Region 2: Memory at d0400000 (64-bit, non-prefetchable) [size=64K]
Region 4: I/O ports at 4000 [size=256]
Region 5: Memory at d0500000 (32-bit, non-prefetchable) [size=1M]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: radeon
02:04.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev b6)
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 168
Interrupt: pin A routed to IRQ 20
Region 0: Memory at d0100000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
Memory window 0: 80000000-83ffffff (prefetchable)
Memory window 1: 84000000-87ffffff
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
Capabilities: <access denied>
Kernel driver in use: yenta_cardbus
02:04.1 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 02) (prog-if 10 [OHCI])
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 21
Region 0: Memory at d0101000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
10:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
Subsystem: Hewlett-Packard Company Device [103c:30c2]
Physical Slot: 1
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 44
Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
Kernel driver in use: tg3
30:00.0 Network controller [0280]: Broadcom Corporation BCM4321 802.11a/b/g/n [14e4:4328] (rev 03)
Subsystem: Hewlett-Packard Company BCM4321 802.11a/b/g/n Wireless LAN Controller [103c:1367]
Physical Slot: 1-2
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at c8100000 (64-bit, non-prefetchable) [size=16K]
Region 2: Memory at c8000000 (64-bit, prefetchable) [size=1M]
Capabilities: <access denied>
Kernel driver in use: b43-pci-bridge
** USB devices:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 002: ID 08ff:2580 AuthenTec, Inc. AES2501 Fingerprint Sensor
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 002: ID 03f0:171d Hewlett-Packard Bluetooth 2.0 Interface [Broadcom BCM2045]
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.2
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 3.16.0-4-amd64 (SMP w/2 CPU cores)
Locale: LANG=sl_SI.UTF-8, LC_CTYPE=sl_SI.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)
Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-22
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.43
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:
linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
Reply to: