Bug#801324: linux-image-4.2.0-1-686-pae: System has frozen twice since upgrading to linux-image-4.2.0-1-686-pae
Package: src:linux
Version: 4.2.1-2
Severity: grave
Justification: renders package unusable
"apt-get dist-upgrade" installed the kernel
linux-image-4.2.0-1-686-pae (4.2.1-2) on Sun Oct 4 2015, 12:06:36.
Since then, the system has frozen twice.
When frozen, the system is completely unresponsive on both keyboard,
mouse and on the network (doesn't even respond to ping).
I need to hold in the power button for 5-10 seconds to let BIOS reboot
it.
I will try rebooting into the previous kernel, to see if that makes
the system stop crashing.
-- Package-specific info:
** Version:
Linux version 4.2.0-1-686-pae (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-4) ) #1 SMP Debian 4.2.1-2 (2015-09-27)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.2.0-1-686-pae root=UUID=c666ea19-ecb5-4300-b375-d9e2c748e97a ro quiet
** Not tainted
** Kernel log:
[ 9.333445] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 11.390628] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 11.555676] systemd[1]: systemd 226 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 11.555935] systemd[1]: Detected architecture x86.
[ 11.566829] systemd[1]: Set hostname to <edwards>.
[ 14.518789] systemd[1]: rpcbind.target: Dependency Before=rpcbind.target dropped
[ 15.354010] systemd[1]: accounts-daemon.service: Cannot add dependency job, ignoring: Unit accounts-daemon.service is masked.
[ 15.355465] systemd[1]: Listening on udev Control Socket.
[ 15.355839] systemd[1]: Created slice System Slice.
[ 15.356048] systemd[1]: Created slice User and Session Slice.
[ 15.356088] systemd[1]: Reached target Encrypted Volumes.
[ 15.357369] systemd[1]: Starting Increase datagram queue length...
[ 15.357712] systemd[1]: Listening on Journal Socket.
[ 15.359418] systemd[1]: Mounting Huge Pages File System...
[ 15.361372] systemd[1]: Mounting POSIX Message Queue File System...
[ 15.361763] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 15.363522] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 15.363744] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 15.365509] systemd[1]: Starting LSB: Set keymap...
[ 15.366323] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 15.366752] systemd[1]: Listening on Journal Audit Socket.
[ 15.366827] systemd[1]: Reached target Slices.
[ 15.366915] systemd[1]: Listening on Journal Socket (/dev/log).
[ 15.367034] systemd[1]: Listening on udev Kernel Socket.
[ 15.367167] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 15.367257] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 15.435947] systemd[1]: Starting Load Kernel Modules...
[ 15.436510] systemd[1]: Created slice system-getty.slice.
[ 15.436583] systemd[1]: Reached target Remote File Systems (Pre).
[ 15.445534] systemd[1]: Created slice system-postgresql.slice.
[ 15.446836] systemd[1]: Mounting Debug File System...
[ 15.672228] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 15.674067] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 16.090486] systemd[1]: Mounted POSIX Message Queue File System.
[ 16.090582] systemd[1]: Mounted Huge Pages File System.
[ 16.090627] systemd[1]: Mounted Debug File System.
[ 16.924627] lp: driver loaded but no devices found
[ 17.047346] ppdev: user-space parallel port driver
[ 17.092383] parport_pc 00:03: reported by Plug and Play ACPI
[ 17.092476] parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
[ 17.130410] systemd[1]: Started Create Static Device Nodes in /dev.
[ 17.132446] systemd[1]: Starting udev Kernel Device Manager...
[ 17.188289] lp0: using parport0 (interrupt-driven).
[ 17.616267] loop: module loaded
[ 17.617430] systemd[1]: Started Load Kernel Modules.
[ 17.619178] systemd[1]: Starting Apply Kernel Variables...
[ 18.041847] systemd[1]: Started Apply Kernel Variables.
[ 18.211868] systemd[1]: Started Increase datagram queue length.
[ 18.212331] systemd[1]: Listening on Syslog Socket.
[ 18.214056] systemd[1]: Starting Journal Service...
[ 18.468043] systemd[1]: Started Journal Service.
[ 19.377783] EXT4-fs (sda1): warning: checktime reached, running e2fsck is recommended
[ 19.445949] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 19.892125] systemd-journald[191]: Received request to flush runtime journal from PID 1
[ 21.158117] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 21.158134] ACPI: Power Button [PBTN]
[ 21.158299] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 21.158307] ACPI: Power Button [PWRF]
[ 21.836891] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 21.854656] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.903628] [drm] Initialized drm 1.1.0 20060810
[ 22.066433] intel_rng: Firmware space is locked read-only. If you can't or
intel_rng: don't want to disable this in firmware setup, and if
intel_rng: you are certain that your system has a functional
intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 22.223776] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 22.223899] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 23.307893] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 23.497878] iTCO_vendor_support: vendor-support=0
[ 23.929268] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 23.929374] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[ 24.116244] [drm] Memory usable by graphics device = 128M
[ 24.116255] [drm] Replacing VGA console driver
[ 24.117767] Console: switching to colour dummy device 80x25
[ 24.118631] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 24.118637] [drm] Driver supports precise vblank timestamp query.
[ 24.118758] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 24.124702] [drm] initialized overlay support
[ 24.124774] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[ 24.280214] fbcon: inteldrmfb (fb0) is primary device
[ 24.317554] Console: switching to colour frame buffer device 200x75
[ 24.326326] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 24.326330] i915 0000:00:02.0: registered panic notifier
[ 24.804035] snd_intel8x0 0000:00:1f.5: intel8x0_measure_ac97_clock: measured 54641 usecs (2633 samples)
[ 24.804043] snd_intel8x0 0000:00:1f.5: clocking to 48000
[ 26.342479] Adding 3919856k swap on /dev/sda2. Priority:-1 extents:1 across:3919856k FS
[ 28.194340] RPC: Registered named UNIX socket transport module.
[ 28.194350] RPC: Registered udp transport module.
[ 28.194353] RPC: Registered tcp transport module.
[ 28.194355] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 28.257329] FS-Cache: Loaded
[ 28.452272] FS-Cache: Netfs 'nfs' registered for caching
[ 28.783748] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 62.077740] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 62.269488] tg3 0000:05:02.0: firmware: direct-loading firmware tigon/tg3_tso5.bin
[ 62.578548] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 64.208053] tg3 0000:05:02.0 eth0: Link is up at 100 Mbps, full duplex
[ 64.208077] tg3 0000:05:02.0 eth0: Flow control is on for TX and on for RX
[ 64.208133] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 100.270188] fuse init (API version 7.23)
** Model information
not available
** Loaded modules:
fuse
speedstep_lib
cpufreq_powersave
cpufreq_stats
cpufreq_conservative
cpufreq_userspace
binfmt_misc
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
snd_intel8x0
i915
snd_ac97_codec
snd_pcm_oss
iTCO_wdt
iTCO_vendor_support
snd_mixer_oss
snd_pcm
pcspkr
evdev
psmouse
snd_timer
snd
lpc_ich
mfd_core
soundcore
ac97_bus
serio_raw
video
drm_kms_helper
sg
drm
shpchp
i2c_i801
rng_core
i2c_algo_bit
8250_fintek
button
acpi_cpufreq
processor
thermal_sys
loop
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
hid_generic
usbhid
hid
sr_mod
cdrom
sd_mod
ata_generic
floppy
tg3
ptp
pps_core
ata_piix
libphy
libata
ehci_pci
uhci_hcd
scsi_mod
ehci_hcd
usbcore
usb_common
** Network interface configuration:
auto lo
iface lo inet loopback
allow-hotplug eth0
** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 00:0e:7f:61:c9:39 brd ff:ff:ff:ff:ff:ff
inet 10.10.10.21/24 brd 10.10.10.255 scope global dynamic eth0
valid_lft 17441sec preferred_lft 17441sec
inet6 fe80::20e:7fff:fe61:c939/64 scope link
valid_lft forever preferred_lft forever
*** Device statistics:
Inter-| Receive | Transmit
face |bytes packets errs drop fifo frame compressed multicast|bytes packets errs drop fifo colls carrier compressed
lo: 66836 258 0 0 0 0 0 0 66836 258 0 0 0 0 0 0
eth0: 719915 1440 0 0 0 0 0 14 256188 958 0 0 0 0 0 0
*** Protocol statistics:
Ip:
Forwarding: 2
1444 total packets received
1 with invalid addresses
0 forwarded
0 incoming packets discarded
1443 incoming packets delivered
855 requests sent out
38 dropped because of missing route
Icmp:
0 ICMP messages received
0 input ICMP message failed.
ICMP input histogram:
188 ICMP messages sent
0 ICMP messages failed
ICMP output histogram:
destination unreachable: 188
IcmpMsg:
OutType3: 188
Tcp:
38 active connections openings
4 passive connection openings
8 failed connection attempts
0 connection resets received
1 connections established
797 segments received
638 segments send out
0 segments retransmited
0 bad segments received.
8 resets sent
Udp:
247 packets received
188 packets to unknown port received.
0 packet receive errors
196 packets sent
0 receive buffer errors
0 send buffer errors
IgnoredMulti: 332
UdpLite:
TcpExt:
6 TCP sockets finished time wait in fast timer
23 delayed acks sent
2 packets directly queued to recvmsg prequeue.
979 bytes directly in process context from backlog
TCPDirectCopyFromPrequeue: 1
419 packet headers predicted
3 packets header predicted and directly queued to user
142 acknowledgments not containing data payload received
31 predicted acknowledgments
TCPRcvCoalesce: 145
TCPOFOQueue: 3
TCPAutoCorking: 4
TCPOrigDataSent: 251
IpExt:
InMcastPkts: 34
OutMcastPkts: 29
InBcastPkts: 410
OutBcastPkts: 32
InOctets: 703873
OutOctets: 230391
InMcastOctets: 5782
OutMcastOctets: 4682
InBcastOctets: 44863
OutBcastOctets: 8032
InNoECTPkts: 1446
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface [8086:2570] (rev 02)
Subsystem: Hewlett-Packard Company d330 uT [103c:12bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [e4] Vendor Specific Information: Len=06 <?>
Kernel driver in use: agpgart-intel
00:02.0 VGA compatible controller [0300]: Intel Corporation 82865G Integrated Graphics Controller [8086:2572] (rev 02) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company D530 sff(dc578av) [103c:12bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
Region 1: Memory at fc400000 (32-bit, non-prefetchable) [size=512K]
Region 2: I/O ports at 14e0 [size=8]
Expansion ROM at <unassigned> [disabled]
Capabilities: [d0] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: i915
00:06.0 System peripheral [0880]: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface [8086:2576] (rev 02)
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Region 0: Memory at 70100000 (32-bit, non-prefetchable) [size=4K]
00:1d.0 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 [8086:24d2] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at 1440 [size=32]
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 [8086:24d4] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at 1460 [size=32]
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 [8086:24d7] (rev 02) (prog-if 00 [UHCI])
Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at 1480 [size=32]
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller [8086:24dd] (rev 02) (prog-if 20 [EHCI])
Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 0: Memory at fc480000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev c2) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=05, subordinate=05, sec-latency=64
Memory behind bridge: fc500000-fc7fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
00:1f.0 ISA bridge [0601]: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge [8086:24d0] (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Kernel driver in use: lpc_ich
00:1f.1 IDE interface [0101]: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller [8086:24db] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374
Region 4: I/O ports at 14c0 [size=16]
Region 5: Memory at 70101000 (32-bit, non-prefetchable) [size=1K]
Kernel driver in use: ata_piix
00:1f.2 IDE interface [0101]: Intel Corporation 82801EB (ICH5) SATA Controller [8086:24d1] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at 14f8 [size=8]
Region 1: I/O ports at 1810 [size=4]
Region 2: I/O ports at 1800 [size=8]
Region 3: I/O ports at 1814 [size=4]
Region 4: I/O ports at 14d0 [size=16]
Kernel driver in use: ata_piix
00:1f.3 SMBus [0c05]: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller [8086:24d3] (rev 02)
Subsystem: Hewlett-Packard Company d330 uT [103c:12bc]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at fc00 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller [8086:24d5] (rev 02)
Subsystem: Hewlett-Packard Company d330 uT [103c:12bc]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 1000 [size=256]
Region 1: I/O ports at 1400 [size=64]
Region 2: Memory at fc480400 (32-bit, non-prefetchable) [size=512]
Region 3: Memory at fc480600 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: snd_intel8x0
05:02.0 Ethernet controller [0200]: Broadcom Corporation NetXtreme BCM5782 Gigabit Ethernet [14e4:1696] (rev 03)
Subsystem: Hewlett-Packard Company d530 CMT (DG746A) [103c:12bc]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 64 (16000ns min), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fc500000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: [48] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data
Not readable
Capabilities: [58] MSI: Enable- Count=1/8 Maskable- 64bit+
Address: fff7ef7bfff77de8 Data: ffee
Kernel driver in use: tg3
** USB devices:
Bus 002 Device 003: ID 046d:c00e Logitech, Inc. M-BJ58/M-BJ69 Optical Wheel Mouse
Bus 002 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (650, 'testing'), (600, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)
Kernel: Linux 4.2.0-1-686-pae (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/bash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.2.0-1-686-pae depends on:
ii debconf [debconf-2.0] 1.5.57
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 21-1
ii linux-base 4.0
Versions of packages linux-image-4.2.0-1-686-pae recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.0.6-3
ii libc6-i686 2.19-22
Versions of packages linux-image-4.2.0-1-686-pae suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-28
pn linux-doc-4.2 <none>
Versions of packages linux-image-4.2.0-1-686-pae is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
ii firmware-linux 0.44
ii firmware-linux-nonfree 0.44
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.2.0-1-686-pae/prerm/removing-running-kernel-4.2.0-1-686-pae: true
linux-image-4.2.0-1-686-pae/postinst/mips-initrd-4.2.0-1-686-pae:
linux-image-4.2.0-1-686-pae/postinst/depmod-error-initrd-4.2.0-1-686-pae: false
Reply to: