Bug#800842: linux-image-4.2.0-1-amd64: Kernel Oops when irqbalance is enabled
Package: src:linux
Version: 4.2.1-2
Severity: important
Hi,
when irqblanace (installed version 1.0.6-3) is enabled,
linux-image-4.2.0-1-amd64 oopses ~15 seconds after boot)
This Oops is new with linux-image-4.2.0-1-amd64:
it did not happen with previous kernel versions.
It happens on both (independent) installations on this machine.
Disabling irqbalance seems to fix the issue.
Since rebooting with irqbalance disenabled, no Oops occurred.
The attached file give the dmesg information of the oops'ed kernel.
Thanks for maintaining the Linux kenel in Debian
Peter
PS: I reported the bug against linux, because I think a kernel should
never oops. Feeld free to re-assign as you think appropriate.
-- Package-specific info:
** Version:
Linux version 4.2.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-4) ) #1 SMP Debian 4.2.1-2 (2015-09-27)
** Command line:
BOOT_IMAGE=/vmlinuz-4.2.0-1-amd64 root=LABEL=root1 ro noapic quiet 3
** Not tainted
** Kernel log:
see attached dmesg log
** Model information
sys_vendor: FUJITSU
product_name: ESPRIMO P920
product_version:
chassis_vendor: FUJITSU
chassis_version: C$WX01
bios_vendor: FUJITSU // American Megatrends Inc.
bios_version: V4.6.5.4 R1.10.0 for D3222-A1x
board_vendor: FUJITSU
board_name: D3222-A1
board_version: S26361-D3222-A1
** Loaded modules:
ecb
rfcomm
ebtable_filter
ebtables
binfmt_misc
cpufreq_conservative
cpufreq_powersave
cpufreq_userspace
cpufreq_stats
bnep
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
nf_conntrack_ipv4
nf_defrag_ipv4
iptable_filter
ip_tables
xt_limit
nf_log_ipv6
nf_log_common
xt_LOG
xt_tcpudp
nf_conntrack_ipv6
nf_defrag_ipv6
xt_conntrack
nf_conntrack
ip6table_filter
ip6_tables
x_tables
ftdi_sio
pl2303
usbserial
uas
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
usb_storage
snd_usb_audio
v4l2_common
snd_usbmidi_lib
videodev
snd_rawmidi
snd_seq_device
media
btusb
btrtl
btbcm
btintel
bluetooth
rfkill
tpm_infineon
deflate
ctr
twofish_generic
twofish_avx_x86_64
twofish_x86_64_3way
twofish_x86_64
twofish_common
camellia_generic
camellia_aesni_avx2
camellia_aesni_avx_x86_64
camellia_x86_64
serpent_avx2
serpent_avx_x86_64
serpent_sse2_x86_64
xts
serpent_generic
blowfish_generic
blowfish_x86_64
blowfish_common
cast5_avx_x86_64
cast5_generic
cast_common
des_generic
cbc
cmac
xcbc
rmd160
sha512_ssse3
sha512_generic
crypto_null
af_key
xfrm_algo
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
iosf_mbi
kvm_intel
kvm
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
iTCO_wdt
iTCO_vendor_support
ppdev
snd_hda_codec_hdmi
sha256_ssse3
sha256_generic
hmac
drbg
ansi_cprng
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
evdev
psmouse
snd_hda_codec_realtek
snd_hda_codec_generic
serio_raw
pcspkr
i2c_i801
sg
i915
lpc_ich
snd_hda_intel
mfd_core
snd_hda_codec
shpchp
snd_hda_core
snd_hwdep
drm_kms_helper
snd_pcm
drm
snd_timer
mei_me
snd
mei
soundcore
i2c_algo_bit
fujitsu_laptop
parport_pc
parport
8250_fintek
battery
tpm_tis
processor
video
tpm
button
hid_generic
usbhid
hid
sch5636
sch56xx_common
coretemp
loop
ecryptfs
autofs4
ext4
crc16
mbcache
jbd2
sr_mod
cdrom
sd_mod
ahci
libahci
crc32c_intel
libata
xhci_pci
ehci_pci
xhci_hcd
ehci_hcd
scsi_mod
e1000e
usbcore
ptp
pps_core
usb_common
fan
thermal
thermal_sys
** Network interface configuration:
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (990, 'testing'), (500, 'unstable'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)
Kernel: Linux 4.2.0-1-amd64 (SMP w/4 CPU cores)
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.2.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.57
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 21-1
ii linux-base 4.0
Versions of packages linux-image-4.2.0-1-amd64 recommends:
ii firmware-linux-free 3.4
ii irqbalance 1.0.6-3
Versions of packages linux-image-4.2.0-1-amd64 suggests:
ii debian-kernel-handbook 1.0.16
ii grub-pc 2.02~beta2-28
ii linux-doc-4.2 4.2.1-2
Versions of packages linux-image-4.2.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.44
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
ii firmware-ralink 0.44
ii firmware-realtek 0.44
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.2.0-1-amd64/postinst/depmod-error-initrd-4.2.0-1-amd64: false
linux-image-4.2.0-1-amd64/prerm/removing-running-kernel-4.2.0-1-amd64: true
linux-image-4.2.0-1-amd64/postinst/mips-initrd-4.2.0-1-amd64:
[ 0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.2.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-4) ) #1 SMP Debian 4.2.1-2 (2015-09-27)
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-4.2.0-1-amd64 root=LABEL=root1 ro noapic quiet 3
[ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 0x340 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca89afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ca89b000-0x00000000ca8a1fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ca8a2000-0x00000000cb32cfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cb32d000-0x00000000cb5bdfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000cb5be000-0x00000000daab0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000daab1000-0x00000000db6bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000db6c0000-0x00000000db6d5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000db6d6000-0x00000000db827fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000db828000-0x00000000dcffefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000dcfff000-0x00000000dcffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000dd800000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000041e5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: FUJITSU ESPRIMO P920/D3222-A1, BIOS V4.6.5.4 R1.10.0 for D3222-A1x 09/16/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x41e600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 3 base 00DE000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00DD800000 mask 7FFF800000 uncachable
[ 0.000000] 5 base 041F000000 mask 7FFF000000 uncachable
[ 0.000000] 6 base 041E800000 mask 7FFF800000 uncachable
[ 0.000000] 7 base 041E600000 mask 7FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0xdd800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xdd000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd6e0-0x000fd6ef] mapped at [ffff8800000fd6e0]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01d2c000, 0x01d2cfff] PGTABLE
[ 0.000000] BRK [0x01d2d000, 0x01d2dfff] PGTABLE
[ 0.000000] BRK [0x01d2e000, 0x01d2efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x41e400000-0x41e5fffff]
[ 0.000000] [mem 0x41e400000-0x41e5fffff] page 2M
[ 0.000000] BRK [0x01d2f000, 0x01d2ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x41e3fffff]
[ 0.000000] [mem 0x400000000-0x41e3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x3e0000000-0x3ffffffff]
[ 0.000000] [mem 0x3e0000000-0x3ffffffff] page 1G
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xca89afff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0xbfffffff] page 1G
[ 0.000000] [mem 0xc0000000-0xca7fffff] page 2M
[ 0.000000] [mem 0xca800000-0xca89afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xca8a2000-0xcb32cfff]
[ 0.000000] [mem 0xca8a2000-0xca9fffff] page 4k
[ 0.000000] [mem 0xcaa00000-0xcb1fffff] page 2M
[ 0.000000] [mem 0xcb200000-0xcb32cfff] page 4k
[ 0.000000] BRK [0x01d30000, 0x01d30fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xcb5be000-0xdaab0fff]
[ 0.000000] [mem 0xcb5be000-0xcb5fffff] page 4k
[ 0.000000] [mem 0xcb600000-0xda9fffff] page 2M
[ 0.000000] [mem 0xdaa00000-0xdaab0fff] page 4k
[ 0.000000] BRK [0x01d31000, 0x01d31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xdcfff000-0xdcffffff]
[ 0.000000] [mem 0xdcfff000-0xdcffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3dfffffff]
[ 0.000000] [mem 0x100000000-0x3dfffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x35f08000-0x36f7bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 FTS )
[ 0.000000] ACPI: XSDT 0x00000000DB6C4090 00009C (v01 FUJ PC 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000DB6D0538 00010C (v05 FUJ PC 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000DB6C41B8 00C37E (v02 FTS D3222-A1 00000110 INTL 20091112)
[ 0.000000] ACPI: FACS 0x00000000DB826080 000040
[ 0.000000] ACPI: APIC 0x00000000DB6D0648 000072 (v03 FTS D3222-A1 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000DB6D06C0 000044 (v01 FTS D3222-A1 01072009 AMI 00010013)
[ 0.000000] ACPI: TCPA 0x00000000DB6D0708 000032 (v02 APTIO4 NAPAASF 00000001 MSFT 01000013)
[ 0.000000] ACPI: LPIT 0x00000000DB6D0740 00005C (v01 FTS D3222-A1 00000000 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DB6D07A0 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DB6D0CE0 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
[ 0.000000] ACPI: MCFG 0x00000000DB6D17B8 00003C (v01 FTS D3222-A1 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000DB6D17F8 000038 (v01 FTS D3222-A1 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000DB6D1830 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: SSDT 0x00000000DB6D1BA0 0034E1 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: ASF! 0x00000000DB6D5088 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
[ 0.000000] ACPI: MSDM 0x00000000DB6D5130 000055 (v03 FUJ PC 01072009 AMI 00010013)
[ 0.000000] ACPI: SLIC 0x00000000DB6D5188 000176 (v01 FUJ PC 01072009 AMI 00010013)
[ 0.000000] ACPI: DMAR 0x00000000DB6D5300 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000041e5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x41e5f8000-0x41e5fbfff]
[ 0.000000] [ffffea0000000000-ffffea00107fffff] PMD -> [ffff88040dc00000-ffff88041dbfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000041e5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000ca89afff]
[ 0.000000] node 0: [mem 0x00000000ca8a2000-0x00000000cb32cfff]
[ 0.000000] node 0: [mem 0x00000000cb5be000-0x00000000daab0fff]
[ 0.000000] node 0: [mem 0x00000000dcfff000-0x00000000dcffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000041e5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000041e5fffff]
[ 0.000000] On node 0 totalpages: 4165046
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13921 pages used for memmap
[ 0.000000] DMA32 zone: 890906 pages, LIFO batch:31
[ 0.000000] Normal zone: 51096 pages used for memmap
[ 0.000000] Normal zone: 3270144 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xdda00000-0xdf9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: Skipping IOAPIC probe due to 'noapic' option.
[ 0.000000] Using ACPI for processor (LAPIC) configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] Intel MultiProcessor Specification v1.4
[ 0.000000] MPTABLE: OEM ID: D3222-A1
[ 0.000000] MPTABLE: Product ID: FTS
[ 0.000000] MPTABLE: APIC at: 0xFEE00000
[ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] Processors: 4
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xca89b000-0xca8a1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb32d000-0xcb5bdfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaab1000-0xdb6bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb6c0000-0xdb6d5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb6d6000-0xdb827fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb828000-0xdcffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd000000-0xdd7fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdd800000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88041e200000 s92696 r8192 d30184 u524288
[ 0.000000] pcpu-alloc: s92696 r8192 d30184 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4099944
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-4.2.0-1-amd64 root=LABEL=root1 ro noapic quiet 3
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16300748K/16660184K available (5451K kernel code, 1093K rwdata, 2736K rodata, 1288K init, 832K bss, 359436K reserved, 0K cma-reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:456 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 3192.549 MHz processor
[ 0.000020] Calibrating delay loop (skipped), value calculated using timer frequency.. 6385.09 BogoMIPS (lpj=12770196)
[ 0.000021] pid_max: default: 32768 minimum: 301
[ 0.000025] ACPI: Core revision 20150619
[ 0.007752] ACPI: All ACPI Tables successfully acquired
[ 0.007761] ACPI: setting ELCR to 0200 (from 0c08)
[ 0.007779] Security Framework initialized
[ 0.007781] AppArmor: AppArmor disabled by boot time parameter
[ 0.007782] Yama: disabled by default; enable with sysctl kernel.yama.*
[ 0.008424] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.010712] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.011630] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.011642] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.011832] Initializing cgroup subsys blkio
[ 0.011834] Initializing cgroup subsys memory
[ 0.011838] Initializing cgroup subsys devices
[ 0.011840] Initializing cgroup subsys freezer
[ 0.011841] Initializing cgroup subsys net_cls
[ 0.011843] Initializing cgroup subsys perf_event
[ 0.011845] Initializing cgroup subsys net_prio
[ 0.011863] CPU: Physical Processor ID: 0
[ 0.011864] CPU: Processor Core ID: 0
[ 0.011867] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.011867] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.012610] mce: CPU supports 9 MCE banks
[ 0.012620] CPU0: Thermal monitoring enabled (TM1)
[ 0.012627] process: using mwait in idle threads
[ 0.012630] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.012630] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.012709] Freeing SMP alternatives memory: 20K (ffffffff81c55000 - ffffffff81c5a000)
[ 0.019570] ftrace: allocating 23078 entries in 91 pages
[ 0.025815] DMAR: Host address width 39
[ 0.025816] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.025822] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.025823] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.025826] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.025826] DMAR: RMRR base: 0x000000dce62000 end: 0x000000dce71fff
[ 0.025827] DMAR: RMRR base: 0x000000dd800000 end: 0x000000df9fffff
[ 0.025829] DMAR-IR: IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
[ 0.025830] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.025830] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.026044] Not enabling interrupt remapping due to skipped IO-APIC setup
[ 0.026045] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.026082] TSC deadline timer enabled
[ 0.026084] smpboot: CPU0: Intel(R) Core(TM) i5-4570 CPU @ 3.20GHz (fam: 06, model: 3c, stepping: 03)
[ 0.026102] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.026116] ... version: 3
[ 0.026117] ... bit width: 48
[ 0.026117] ... generic registers: 8
[ 0.026118] ... value mask: 0000ffffffffffff
[ 0.026118] ... max period: 0000ffffffffffff
[ 0.026119] ... fixed-purpose events: 3
[ 0.026119] ... event mask: 00000007000000ff
[ 0.026480] x86: Booting SMP configuration:
[ 0.026481] .... node #0, CPUs: #1
[ 0.028301] microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.031232] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.031293] #2
[ 0.033113] microcode: CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.036058] #3
[ 0.037982] microcode: CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.040867] x86: Booted up 1 node, 4 CPUs
[ 0.040869] smpboot: Total of 4 processors activated (25540.39 BogoMIPS)
[ 0.043307] devtmpfs: initialized
[ 0.045406] PM: Registering ACPI NVS region [mem 0xca89b000-0xca8a1fff] (28672 bytes)
[ 0.045407] PM: Registering ACPI NVS region [mem 0xdb6d6000-0xdb827fff] (1384448 bytes)
[ 0.045481] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.045531] pinctrl core: initialized pinctrl subsystem
[ 0.045625] NET: Registered protocol family 16
[ 0.060916] cpuidle: using governor ladder
[ 0.072933] cpuidle: using governor menu
[ 0.072990] ACPI: bus type PCI registered
[ 0.072991] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.073053] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.073055] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.073061] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[ 0.073112] PCI: Using configuration type 1 for base access
[ 0.073397] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.073412] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[ 0.083503] ACPI: Added _OSI(Module Device)
[ 0.083504] ACPI: Added _OSI(Processor Device)
[ 0.083505] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.083506] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.085958] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.087793] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.088267] ACPI: Dynamic OEM Table Load:
[ 0.088271] ACPI: SSDT 0xFFFF88040BB16400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
[ 0.088674] ACPI: Dynamic OEM Table Load:
[ 0.088677] ACPI: SSDT 0xFFFF88040BB11000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
[ 0.089123] ACPI: Dynamic OEM Table Load:
[ 0.089125] ACPI: SSDT 0xFFFF88040B486C00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
[ 0.089804] ACPI: Interpreter enabled
[ 0.089809] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150619/hwxface-580)
[ 0.089812] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150619/hwxface-580)
[ 0.089825] ACPI: (supports S0 S3 S4 S5)
[ 0.089826] ACPI: Using PIC for interrupt routing
[ 0.089844] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.095672] ACPI: Power Resource [FN00] (off)
[ 0.095727] ACPI: Power Resource [FN01] (off)
[ 0.095781] ACPI: Power Resource [FN02] (off)
[ 0.095834] ACPI: Power Resource [FN03] (off)
[ 0.095888] ACPI: Power Resource [FN04] (off)
[ 0.096468] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.096471] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.096904] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.097210] PCI host bridge to bus 0000:00
[ 0.097212] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.097213] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.097214] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.097215] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.097217] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.097222] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[ 0.099411] pci 0000:00:02.0: [8086:0412] type 00 class 0x030000
[ 0.099420] pci 0000:00:02.0: reg 0x10: [mem 0xf7800000-0xf7bfffff 64bit]
[ 0.099425] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.099428] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.099478] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.099486] pci 0000:00:03.0: reg 0x10: [mem 0xf7d34000-0xf7d37fff 64bit]
[ 0.099555] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.099576] pci 0000:00:14.0: reg 0x10: [mem 0xf7d20000-0xf7d2ffff 64bit]
[ 0.099616] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.099641] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.099668] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.099690] pci 0000:00:16.0: reg 0x10: [mem 0xf7d40000-0xf7d4000f 64bit]
[ 0.099732] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.099784] pci 0000:00:19.0: [8086:153a] type 00 class 0x020000
[ 0.099805] pci 0000:00:19.0: reg 0x10: [mem 0xf7d00000-0xf7d1ffff]
[ 0.099811] pci 0000:00:19.0: reg 0x14: [mem 0xf7d3d000-0xf7d3dfff]
[ 0.099818] pci 0000:00:19.0: reg 0x18: [io 0xf080-0xf09f]
[ 0.099855] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.099879] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.099906] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.099929] pci 0000:00:1a.0: reg 0x10: [mem 0xf7d3c000-0xf7d3c3ff]
[ 0.099986] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.100021] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.100049] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.100069] pci 0000:00:1b.0: reg 0x10: [mem 0xf7d30000-0xf7d33fff 64bit]
[ 0.100115] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.100141] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.100166] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.100215] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.100264] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.100292] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.100340] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.100386] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.100416] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.100440] pci 0000:00:1d.0: reg 0x10: [mem 0xf7d3b000-0xf7d3b3ff]
[ 0.100497] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.100530] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.100558] pci 0000:00:1f.0: [8086:8c4e] type 00 class 0x060100
[ 0.100686] pci 0000:00:1f.2: [8086:8c02] type 00 class 0x010601
[ 0.100703] pci 0000:00:1f.2: reg 0x10: [io 0xf0d0-0xf0d7]
[ 0.100709] pci 0000:00:1f.2: reg 0x14: [io 0xf0c0-0xf0c3]
[ 0.100716] pci 0000:00:1f.2: reg 0x18: [io 0xf0b0-0xf0b7]
[ 0.100721] pci 0000:00:1f.2: reg 0x1c: [io 0xf0a0-0xf0a3]
[ 0.100728] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.100734] pci 0000:00:1f.2: reg 0x24: [mem 0xf7d3a000-0xf7d3a7ff]
[ 0.100753] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.100798] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.100811] pci 0000:00:1f.3: reg 0x10: [mem 0xf7d39000-0xf7d390ff 64bit]
[ 0.100828] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.100887] pci 0000:00:1f.6: [8086:8c24] type 00 class 0x118000
[ 0.100910] pci 0000:00:1f.6: reg 0x10: [mem 0xf7d38000-0xf7d38fff 64bit]
[ 0.101031] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.101100] pci 0000:02:00.0: [1033:0194] type 00 class 0x0c0330
[ 0.101154] pci 0000:02:00.0: reg 0x10: [mem 0xf7c00000-0xf7c01fff 64bit]
[ 0.101268] pci 0000:02:00.0: PME# supported from D0 D3hot
[ 0.101295] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.112997] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.113001] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.113492] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.113526] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.113559] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.113591] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[ 0.113623] ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.113655] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.113686] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[ 0.113718] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[ 0.113915] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.113983] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.113984] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.113986] vgaarb: loaded
[ 0.113986] vgaarb: bridge control possible 0000:00:02.0
[ 0.114063] PCI: Using ACPI for IRQ routing
[ 0.115264] PCI: pci_cache_line_size set to 64 bytes
[ 0.115298] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.115299] e820: reserve RAM buffer [mem 0xca89b000-0xcbffffff]
[ 0.115299] e820: reserve RAM buffer [mem 0xcb32d000-0xcbffffff]
[ 0.115300] e820: reserve RAM buffer [mem 0xdaab1000-0xdbffffff]
[ 0.115301] e820: reserve RAM buffer [mem 0xdd000000-0xdfffffff]
[ 0.115302] e820: reserve RAM buffer [mem 0x41e600000-0x41fffffff]
[ 0.115393] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.115396] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.117418] clocksource: Switched to clocksource hpet
[ 0.121147] pnp: PnP ACPI init
[ 0.121281] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.121283] system 00:00: [io 0xffff] has been reserved
[ 0.121285] system 00:00: [io 0xffff] has been reserved
[ 0.121286] system 00:00: [io 0xffff] has been reserved
[ 0.121287] system 00:00: [io 0x1c00-0x1cfe] has been reserved
[ 0.121289] system 00:00: [io 0x1d00-0x1dfe] has been reserved
[ 0.121290] system 00:00: [io 0x1e00-0x1efe] has been reserved
[ 0.121291] system 00:00: [io 0x1f00-0x1ffe] has been reserved
[ 0.121293] system 00:00: [io 0x1800-0x18fe] could not be reserved
[ 0.121294] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.121296] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.121312] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.121343] system 00:02: [io 0x1854-0x1857] has been reserved
[ 0.121344] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.121492] system 00:03: [io 0x0600-0x063f] has been reserved
[ 0.121494] system 00:03: [io 0x0640-0x064f] has been reserved
[ 0.121495] system 00:03: [io 0x0778-0x077f] has been reserved
[ 0.121497] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.121898] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.122347] pnp 00:05: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.122378] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.122380] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122580] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.122581] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.122583] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.122584] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.122585] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.122587] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.122589] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.122590] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.122591] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[ 0.122593] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.122594] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
[ 0.122595] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
[ 0.122597] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.122720] pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.122765] pnp: PnP ACPI: found 9 devices
[ 0.128563] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.128574] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.128577] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[ 0.128578] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[ 0.128586] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.128587] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x002fffff] res_to_dev_res add_size 200000 min_align 100000
[ 0.128589] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.128590] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.128591] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.128592] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.128594] pci 0000:00:1c.0: BAR 14: assigned [mem 0xdfa00000-0xdfbfffff]
[ 0.128597] pci 0000:00:1c.0: BAR 15: assigned [mem 0xdfc00000-0xdfdfffff 64bit pref]
[ 0.128598] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.128600] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.128602] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.128606] pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xdfbfffff]
[ 0.128609] pci 0000:00:1c.0: bridge window [mem 0xdfc00000-0xdfdfffff 64bit pref]
[ 0.128614] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.128618] pci 0000:00:1c.2: bridge window [mem 0xf7c00000-0xf7cfffff]
[ 0.128624] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.128625] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.128626] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.128627] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[ 0.128628] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ 0.128629] pci_bus 0000:01: resource 1 [mem 0xdfa00000-0xdfbfffff]
[ 0.128630] pci_bus 0000:01: resource 2 [mem 0xdfc00000-0xdfdfffff 64bit pref]
[ 0.128630] pci_bus 0000:02: resource 1 [mem 0xf7c00000-0xf7cfffff]
[ 0.128671] NET: Registered protocol family 2
[ 0.128806] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.128953] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.129058] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.129078] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.129116] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.129179] NET: Registered protocol family 1
[ 0.129188] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.129279] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 0.129280] PCI: setting IRQ 11 as level-triggered
[ 0.149599] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 3
[ 0.149600] PCI: setting IRQ 3 as level-triggered
[ 0.169615] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.169616] PCI: setting IRQ 10 as level-triggered
[ 0.169686] PCI: CLS 64 bytes, default 64
[ 0.169721] Unpacking initramfs...
[ 0.369877] Freeing initrd memory: 16848K (ffff880035f08000 - ffff880036f7c000)
[ 0.369902] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.369905] software IO TLB [mem 0xd6ab1000-0xdaab1000] (64MB) mapped at [ffff8800d6ab1000-ffff8800daab0fff]
[ 0.369947] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.369948] hw unit of domain pp0-core 2^-14 Joules
[ 0.369949] hw unit of domain package 2^-14 Joules
[ 0.369949] hw unit of domain dram 2^-14 Joules
[ 0.369950] hw unit of domain pp1-gpu 2^-14 Joules
[ 0.370029] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.370035] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.370037] microcode: CPU2 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.370043] microcode: CPU3 sig=0x306c3, pf=0x2, revision=0x1c
[ 0.370074] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.370300] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.370328] audit: initializing netlink subsys (disabled)
[ 0.370341] audit: type=2000 audit(1443941327.364:1): initialized
[ 0.370588] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.370601] zpool: loaded
[ 0.370602] zbud: loaded
[ 0.370692] VFS: Disk quotas dquot_6.6.0
[ 0.370713] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.370987] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 0.371016] io scheduler noop registered
[ 0.371019] io scheduler deadline registered
[ 0.371028] io scheduler cfq registered (default)
[ 0.371302] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.371306] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.371321] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.371322] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.371325] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.371329] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.371337] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 0.371355] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.371358] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.371373] intel_idle: MWAIT substates: 0x42120
[ 0.371374] intel_idle: v0.4 model 0x3C
[ 0.371374] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.371514] GHES: HEST is not enabled!
[ 0.371568] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.392089] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.392442] Linux agpgart interface v0.103
[ 0.392477] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[ 0.392477] AMD IOMMUv2 functionality not available on this system
[ 0.392728] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.395751] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.395755] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.395908] mousedev: PS/2 mouse device common for all mice
[ 0.395945] rtc_cmos 00:01: RTC can wake from S4
[ 0.396077] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.396098] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.396107] Intel P-state driver initializing.
[ 0.396243] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.398418] NET: Registered protocol family 10
[ 0.398921] mip6: Mobile IPv6
[ 0.398934] NET: Registered protocol family 17
[ 0.398950] mpls_gso: MPLS GSO support
[ 0.400058] registered taskstats version 1
[ 0.400091] zswap: loading zswap
[ 0.400097] zswap: using zbud pool
[ 0.400103] zswap: using lzo compressor
[ 0.401195] rtc_cmos 00:01: setting system clock to 2015-10-04 06:48:47 UTC (1443941327)
[ 0.401403] PM: Hibernation image not present or could not be loaded.
[ 0.402051] Freeing unused kernel memory: 1288K (ffffffff81b13000 - ffffffff81c55000)
[ 0.402055] Write protecting the kernel read-only data: 10240k
[ 0.402623] Freeing unused kernel memory: 680K (ffff880001556000 - ffff880001600000)
[ 0.403161] Freeing unused kernel memory: 1360K (ffff8800018ac000 - ffff880001a00000)
[ 0.448682] random: systemd-udevd urandom read with 1 bits of entropy available
[ 0.475018] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.475021] ACPI: Thermal Zone [TZ00] (28 C)
[ 0.475183] thermal LNXTHERM:01: registered as thermal_zone1
[ 0.475184] ACPI: Thermal Zone [TZ01] (30 C)
[ 0.475711] pps_core: LinuxPPS API ver. 1 registered
[ 0.475713] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.475874] PTP clock support registered
[ 0.476522] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.5-k
[ 0.476523] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 0.476675] ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 3
[ 0.476715] ACPI: bus type USB registered
[ 0.476721] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 0.476736] usbcore: registered new interface driver usbfs
[ 0.476746] usbcore: registered new interface driver hub
[ 0.476759] usbcore: registered new device driver usb
[ 0.477145] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.477278] ehci-pci: EHCI PCI platform driver
[ 0.477654] SCSI subsystem initialized
[ 0.487376] libata version 3.00 loaded.
[ 0.650614] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 0.650617] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 90:1b:0e:20:11:62
[ 0.650618] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 0.650665] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 0.650824] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.650831] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 0.650911] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[ 0.650917] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.651145] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.651147] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.651148] usb usb1: Product: xHCI Host Controller
[ 0.651149] usb usb1: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
[ 0.651150] usb usb1: SerialNumber: 0000:00:14.0
[ 0.651289] hub 1-0:1.0: USB hub found
[ 0.651336] hub 1-0:1.0: 15 ports detected
[ 0.652724] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.652728] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 0.652819] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.652821] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.652823] usb usb2: Product: xHCI Host Controller
[ 0.652824] usb usb2: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
[ 0.652825] usb usb2: SerialNumber: 0000:00:14.0
[ 0.652934] hub 2-0:1.0: USB hub found
[ 0.652950] hub 2-0:1.0: 6 ports detected
[ 0.653268] usb: failed to peer usb2-port4 and usb1-port15 by location (usb2-port4:none) (usb1-port15:usb2-port3)
[ 0.653271] usb usb2-port4: failed to peer to usb1-port15 (-16)
[ 0.653272] usb: port power management may be unreliable
[ 0.653639] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.653643] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 3
[ 0.653808] xhci_hcd 0000:02:00.0: hcc params 0x014042cb hci version 0x96 quirks 0x00000004
[ 0.653974] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.653976] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.653977] usb usb3: Product: xHCI Host Controller
[ 0.653977] usb usb3: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
[ 0.653978] usb usb3: SerialNumber: 0000:02:00.0
[ 0.654064] hub 3-0:1.0: USB hub found
[ 0.654071] hub 3-0:1.0: 2 ports detected
[ 0.654137] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 0.654139] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 4
[ 0.654140] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.654144] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
[ 0.654162] ehci-pci 0000:00:1a.0: debug port 2
[ 0.657148] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.657157] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.657157] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.657158] usb usb4: Product: xHCI Host Controller
[ 0.657159] usb usb4: Manufacturer: Linux 4.2.0-1-amd64 xhci-hcd
[ 0.657160] usb usb4: SerialNumber: 0000:02:00.0
[ 0.657227] hub 4-0:1.0: USB hub found
[ 0.657240] hub 4-0:1.0: 2 ports detected
[ 0.658087] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.658137] ehci-pci 0000:00:1a.0: irq 11, io mem 0xf7d3c000
[ 0.669938] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.669994] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.669995] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.669996] usb usb5: Product: EHCI Host Controller
[ 0.669997] usb usb5: Manufacturer: Linux 4.2.0-1-amd64 ehci_hcd
[ 0.669998] usb usb5: SerialNumber: 0000:00:1a.0
[ 0.670159] hub 5-0:1.0: USB hub found
[ 0.670163] hub 5-0:1.0: 2 ports detected
[ 0.670370] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.670374] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 0.670387] ehci-pci 0000:00:1d.0: debug port 2
[ 0.674307] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.674313] ehci-pci 0000:00:1d.0: irq 3, io mem 0xf7d3b000
[ 0.685951] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.686005] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.686006] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.686007] usb usb6: Product: EHCI Host Controller
[ 0.686008] usb usb6: Manufacturer: Linux 4.2.0-1-amd64 ehci_hcd
[ 0.686009] usb usb6: SerialNumber: 0000:00:1d.0
[ 0.686152] hub 6-0:1.0: USB hub found
[ 0.686156] hub 6-0:1.0: 2 ports detected
[ 0.686287] ahci 0000:00:1f.2: version 3.0
[ 0.686421] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
[ 0.686510] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x7 impl SATA mode
[ 0.686512] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.702535] scsi host0: ahci
[ 0.702685] scsi host1: ahci
[ 0.702845] scsi host2: ahci
[ 0.702928] scsi host3: ahci
[ 0.703005] scsi host4: ahci
[ 0.703085] scsi host5: ahci
[ 0.703117] ata1: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a100 irq 33
[ 0.703120] ata2: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a180 irq 33
[ 0.703121] ata3: SATA max UDMA/133 abar m2048@0xf7d3a000 port 0xf7d3a200 irq 33
[ 0.703122] ata4: DUMMY
[ 0.703122] ata5: DUMMY
[ 0.703123] ata6: DUMMY
[ 0.962181] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[ 0.982193] usb 5-1: new high-speed USB device number 2 using ehci-pci
[ 0.998201] usb 6-1: new high-speed USB device number 2 using ehci-pci
[ 1.022224] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.022241] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.022256] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.022616] ata1.00: supports DRM functions and may not be fully accessible
[ 1.023111] ata1.00: ATA-10: Crucial_CT1024MX200SSD1, MU02, max UDMA/133
[ 1.023114] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.023651] ata2.00: ATA-8: TOSHIBA DT01ACA200, MX4OABB0, max UDMA/133
[ 1.023654] ata2.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.024427] ata1.00: supports DRM functions and may not be fully accessible
[ 1.025236] ata2.00: configured for UDMA/133
[ 1.026167] ata1.00: configured for UDMA/133
[ 1.026313] scsi 0:0:0:0: Direct-Access ATA Crucial_CT1024MX MU02 PQ: 0 ANSI: 5
[ 1.026586] ata3.00: ATAPI: TSSTcorp CDDVDW SH-216DB, FT00, max UDMA/100
[ 1.026686] scsi 1:0:0:0: Direct-Access ATA TOSHIBA DT01ACA2 ABB0 PQ: 0 ANSI: 5
[ 1.031541] ata3.00: configured for UDMA/100
[ 1.033342] scsi 2:0:0:0: CD-ROM TSSTcorp CDDVDW SH-216DB FT00 PQ: 0 ANSI: 5
[ 1.040037] ata1.00: Enabling discard_zeroes_data
[ 1.040048] sd 1:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.81 TiB)
[ 1.040049] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.040050] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.040051] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 1.040087] sd 1:0:0:0: [sdb] Write Protect is off
[ 1.040090] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.040093] sd 0:0:0:0: [sda] Write Protect is off
[ 1.040095] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.040106] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.040108] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.040328] ata1.00: Enabling discard_zeroes_data
[ 1.041125] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.041443] ata1.00: Enabling discard_zeroes_data
[ 1.041536] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.053593] sr 2:0:0:0: [sr0] scsi3-mmc drive: 32x/32x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.053596] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.053684] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.118584] usb 5-1: New USB device found, idVendor=8087, idProduct=8008
[ 1.118587] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.118846] hub 5-1:1.0: USB hub found
[ 1.118956] hub 5-1:1.0: 6 ports detected
[ 1.129633] sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 sdb8 >
[ 1.130222] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 1.130560] usb 6-1: New USB device found, idVendor=8087, idProduct=8000
[ 1.130562] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.130706] hub 6-1:1.0: USB hub found
[ 1.130814] hub 6-1:1.0: 8 ports detected
[ 1.177399] usb 1-4: New USB device found, idVendor=0a12, idProduct=0001
[ 1.177402] usb 1-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.177403] usb 1-4: Product: CSR8510 A10
[ 1.290439] usb 1-6: new full-speed USB device number 3 using xhci_hcd
[ 1.370491] tsc: Refined TSC clocksource calibration: 3192.606 MHz
[ 1.370494] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e050166e04, max_idle_ns: 440795273449 ns
[ 1.418905] usb 1-6: New USB device found, idVendor=0557, idProduct=8021
[ 1.418906] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.419029] usb 1-6: ep 0x81 - rounding interval to 1024 microframes, ep desc says 2040 microframes
[ 1.419301] hub 1-6:1.0: USB hub found
[ 1.419444] hub 1-6:1.0: 4 ports detected
[ 1.586640] usb 1-7: new full-speed USB device number 4 using xhci_hcd
[ 1.698373] PM: Starting manual resume from disk
[ 1.698376] PM: Hibernation image partition 8:18 present
[ 1.698377] PM: Looking for hibernation image.
[ 1.698512] PM: Image not found (code -22)
[ 1.698514] PM: Hibernation image not present or could not be loaded.
[ 1.700354] PM: Marking nosave pages: [mem 0x00000000-0x00000fff]
[ 1.700357] PM: Marking nosave pages: [mem 0x0009d000-0x000fffff]
[ 1.700359] PM: Marking nosave pages: [mem 0xca89b000-0xca8a1fff]
[ 1.700360] PM: Marking nosave pages: [mem 0xcb32d000-0xcb5bdfff]
[ 1.700369] PM: Marking nosave pages: [mem 0xdaab1000-0xdcffefff]
[ 1.700489] PM: Marking nosave pages: [mem 0xdd000000-0xffffffff]
[ 1.700846] PM: Basic memory bitmaps created
[ 1.701474] PM: Basic memory bitmaps freed
[ 1.719258] usb 1-7: New USB device found, idVendor=067b, idProduct=2303
[ 1.719259] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.719260] usb 1-7: Product: USB-Serial Controller
[ 1.719260] usb 1-7: Manufacturer: Prolific Technology Inc.
[ 1.725356] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 1.772594] systemd[1]: Failed to insert module 'kdbus': Function not implemented
[ 1.776477] systemd[1]: systemd 226 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
[ 1.776563] systemd[1]: Detected architecture x86-64.
[ 1.776728] systemd[1]: Set hostname to <moth>.
[ 1.794805] usb 1-6.1: new low-speed USB device number 5 using xhci_hcd
[ 1.838391] systemd[1]: Listening on Journal Socket (/dev/log).
[ 1.838441] systemd[1]: Reached target Remote File Systems (Pre).
[ 1.838515] systemd[1]: Created slice System Slice.
[ 1.838793] systemd[1]: Starting Increase datagram queue length...
[ 1.838942] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 1.838986] systemd[1]: Listening on udev Control Socket.
[ 1.839038] systemd[1]: Created slice User and Session Slice.
[ 1.839047] systemd[1]: Reached target Slices.
[ 1.839138] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 1.839183] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 1.839210] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 1.839278] systemd[1]: Listening on Journal Socket.
[ 1.839537] systemd[1]: Mounting Huge Pages File System...
[ 1.840372] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway.
[ 1.840620] systemd[1]: Mounting Temporary Directory...
[ 1.840896] systemd[1]: Mounting Debug File System...
[ 1.841621] systemd[1]: Mounting POSIX Message Queue File System...
[ 1.843236] systemd[1]: Starting Load Kernel Modules...
[ 1.843559] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 1.843635] systemd[1]: Created slice system-getty.slice.
[ 1.845540] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 1.845566] systemd[1]: Listening on udev Kernel Socket.
[ 1.845582] systemd[1]: Reached target Encrypted Volumes.
[ 1.845629] systemd[1]: Listening on Journal Audit Socket.
[ 1.846292] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 1.846678] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 1.849749] systemd[1]: Mounted POSIX Message Queue File System.
[ 1.849766] systemd[1]: Mounted Debug File System.
[ 1.849778] systemd[1]: Mounted Temporary Directory.
[ 1.851407] systemd[1]: Mounted Huge Pages File System.
[ 1.851609] systemd[1]: Started Increase datagram queue length.
[ 1.853181] loop: module loaded
[ 1.854608] systemd[1]: Listening on Syslog Socket.
[ 1.854956] systemd[1]: Starting Journal Service...
[ 1.856672] sch5636: Found theseus chip at 0x640, revison: 1.30
[ 1.859267] systemd[1]: Started Create Static Device Nodes in /dev.
[ 1.859613] systemd[1]: Starting udev Kernel Device Manager...
[ 1.864191] systemd[1]: Started Load Kernel Modules.
[ 1.864534] systemd[1]: Starting Apply Kernel Variables...
[ 1.866628] systemd[1]: Started Apply Kernel Variables.
[ 1.877115] systemd[1]: Started Journal Service.
[ 1.907651] usb 1-6.1: New USB device found, idVendor=04d9, idProduct=1818
[ 1.907654] usb 1-6.1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.907655] usb 1-6.1: Product: USB Keyboard
[ 1.907756] usb 1-6.1: ep 0x83 - rounding interval to 32 microframes, ep desc says 40 microframes
[ 1.919726] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.931221] EXT4-fs (sda5): re-mounted. Opts: acl
[ 1.937758] systemd-journald[223]: Received request to flush runtime journal from PID 1
[ 1.955683] usbcore: registered new interface driver usbhid
[ 1.955686] usbhid: USB HID core driver
[ 1.957308] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.0/0003:04D9:1818.0001/input/input2
[ 1.960507] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[ 1.972105] input: Fujitsu FUJ02E3 as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/FUJ02E3:00/input/input4
[ 2.007382] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 2.009032] [drm] Initialized drm 1.1.0 20060810
[ 2.011019] ACPI: Power Button [PWRB]
[ 2.011024] fujitsu_laptop: ACPI: Fujitsu FUJ02E3 [FEXT] (on)
[ 2.011146] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 2.011148] ACPI: Power Button [PWRF]
[ 2.011321] fujitsu_laptop: BTNI: [0x0]
[ 2.011522] fujitsu_laptop: driver 0.6.0 successfully loaded
[ 2.011606] hid-generic 0003:04D9:1818.0001: input,hidraw0: USB HID v1.10 Keyboard [USB Keyboard] on usb-0000:00:14.0-6.1/input0
[ 2.011685] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.1/0003:04D9:1818.0002/input/input6
[ 2.014667] ACPI Warning: SystemIO range 0x000000000000F040-0x000000000000F05F conflicts with OpRegion 0x000000000000F040-0x000000000000F04F (\_SB_.PCI0.SBUS.SMBI) (20150619/utaddress-254)
[ 2.014673] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.015127] ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
[ 2.015966] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.015984] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 2.016001] sr 2:0:0:0: Attached scsi generic sg2 type 5
[ 2.019047] tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
[ 2.022167] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 2.026630] [drm] Memory usable by graphics device = 2048M
[ 2.026633] [drm] Replacing VGA console driver
[ 2.026753] snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC671: line_outs=1 (0x21/0x0/0x0/0x0/0x0) type:line
[ 2.026754] snd_hda_codec_realtek hdaudioC0D2: speaker_outs=1 (0x17/0x0/0x0/0x0/0x0)
[ 2.026754] snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
[ 2.026755] snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
[ 2.026755] snd_hda_codec_realtek hdaudioC0D2: inputs:
[ 2.026756] snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
[ 2.026757] snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
[ 2.026758] snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
[ 2.027406] Console: switching to colour dummy device 80x25
[ 2.030909] AVX2 version of gcm_enc/dec engaged.
[ 2.030911] AES CTR mode by8 optimization enabled
[ 2.034091] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 2.034093] [drm] Driver supports precise vblank timestamp query.
[ 2.034175] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 2.035894] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 2.042927] sha256_ssse3: Using AVX2 optimized SHA-256 implementation
[ 2.048215] random: nonblocking pool is initialized
[ 2.051058] usb 1-8: new high-speed USB device number 6 using xhci_hcd
[ 2.067064] hid-generic 0003:04D9:1818.0002: input,hidraw1: USB HID v1.10 Device [USB Keyboard] on usb-0000:00:14.0-6.1/input1
[ 2.067091] Adding 33554428k swap on /dev/sda2. Priority:1 extents:1 across:33554428k SSFS
[ 2.067160] input: USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6.1/1-6.1:1.2/0003:04D9:1818.0003/input/input15
[ 2.068453] hid-generic 0003:04D9:1818.0003: input,hidraw2: USB HID v1.10 Mouse [USB Keyboard] on usb-0000:00:14.0-6.1/input2
[ 2.068761] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 2.068780] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 2.068798] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 2.068815] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 2.068832] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 2.098758] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: acl
[ 2.099747] intel_rapl: Found RAPL domain package
[ 2.099749] intel_rapl: Found RAPL domain core
[ 2.099751] intel_rapl: Found RAPL domain uncore
[ 2.099752] intel_rapl: Found RAPL domain dram
[ 2.104941] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.105351] acpi device:60: registered as cooling_device10
[ 2.105400] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[ 2.105483] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 2.105487] [drm] Initialized i915 1.6.0 20150522 for 0000:00:02.0 on minor 0
[ 2.124331] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: acl
[ 2.128823] fbcon: inteldrmfb (fb0) is primary device
[ 2.139983] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: acl
[ 2.147504] iTCO_vendor_support: vendor-support=0
[ 2.147964] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 2.147989] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 2.148034] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.148413] ppdev: user-space parallel port driver
[ 2.148977] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: acl
[ 2.158269] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input17
[ 2.158307] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input18
[ 2.158356] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input19
[ 2.161555] Console: switching to colour frame buffer device 240x75
[ 2.164756] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.164757] i915 0000:00:02.0: registered panic notifier
[ 2.180053] usb 1-8: New USB device found, idVendor=0424, idProduct=2514
[ 2.180055] usb 1-8: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.180437] hub 1-8:1.0: USB hub found
[ 2.180454] hub 1-8:1.0: 3 ports detected
[ 2.195000] NET: Registered protocol family 15
[ 2.199840] sha512_ssse3: Using AVX2 optimized SHA-512 implementation
[ 2.247455] parport_pc 00:05: reported by Plug and Play ACPI
[ 2.247507] parport0: PC-style at 0x378, irq 5 [PCSPP,TRISTATE,EPP]
[ 2.351245] usb 1-10: new high-speed USB device number 7 using xhci_hcd
[ 2.371393] clocksource: Switched to clocksource tsc
[ 2.551412] usb 1-8.1: new high-speed USB device number 8 using xhci_hcd
[ 2.647591] usb 1-8.1: New USB device found, idVendor=0424, idProduct=2640
[ 2.647593] usb 1-8.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.648109] hub 1-8.1:1.0: USB hub found
[ 2.648178] hub 1-8.1:1.0: 3 ports detected
[ 2.723542] usb 1-8.2: new full-speed USB device number 9 using xhci_hcd
[ 2.821975] usb 1-8.2: New USB device found, idVendor=04e6, idProduct=5115
[ 2.821977] usb 1-8.2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[ 2.821978] usb 1-8.2: Product: SCR33x USB Smart Card Reader
[ 2.821979] usb 1-8.2: Manufacturer: SCM Microsystems Inc.
[ 2.821980] usb 1-8.2: SerialNumber: 60600adc
[ 2.911685] usb 1-8.3: new full-speed USB device number 10 using xhci_hcd
[ 3.001256] usb 1-8.3: New USB device found, idVendor=147e, idProduct=2016
[ 3.001259] usb 1-8.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.001260] usb 1-8.3: Product: Biometric Coprocessor
[ 3.001261] usb 1-8.3: Manufacturer: UPEK
[ 3.001437] usb 1-8.3: ep 0x83 - rounding interval to 128 microframes, ep desc says 160 microframes
[ 3.071876] usb 1-8.1.1: new high-speed USB device number 11 using xhci_hcd
[ 3.081952] Adding 33554428k swap on /dev/sdb2. Priority:2 extents:1 across:33554428k FS
[ 3.218919] usb 1-8.1.1: New USB device found, idVendor=0424, idProduct=4060
[ 3.218922] usb 1-8.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.218923] usb 1-8.1.1: Product: Ultra Fast Media Reader
[ 3.218924] usb 1-8.1.1: Manufacturer: Generic
[ 3.218925] usb 1-8.1.1: SerialNumber: 000000264001
[ 3.591199] usb 1-10: New USB device found, idVendor=046d, idProduct=082d
[ 3.591204] usb 1-10: New USB device strings: Mfr=0, Product=2, SerialNumber=1
[ 3.591206] usb 1-10: Product: HD Pro Webcam C920
[ 3.591208] usb 1-10: SerialNumber: 583D409F
[ 3.756465] usb 1-13: new full-speed USB device number 12 using xhci_hcd
[ 3.890297] usb 1-13: New USB device found, idVendor=0403, idProduct=fc0d
[ 3.890305] usb 1-13: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 3.890309] usb 1-13: Product: Crystalfontz CFA-635 USB LCD
[ 3.890312] usb 1-13: Manufacturer: Crystalfontz
[ 3.912746] Bluetooth: Core ver 2.20
[ 3.912760] NET: Registered protocol family 31
[ 3.912762] Bluetooth: HCI device and connection manager initialized
[ 3.912766] Bluetooth: HCI socket layer initialized
[ 3.912768] Bluetooth: L2CAP socket layer initialized
[ 3.912777] Bluetooth: SCO socket layer initialized
[ 3.916000] usbcore: registered new interface driver btusb
[ 3.917579] media: Linux media interface: v0.10
[ 3.926358] Linux video capture interface: v2.00
[ 3.980643] usb-storage 1-8.1.1:1.0: USB Mass Storage device detected
[ 3.980916] scsi host6: usb-storage 1-8.1.1:1.0
[ 4.037189] usbcore: registered new interface driver usb-storage
[ 4.038148] usbcore: registered new interface driver uas
[ 4.102318] usbcore: registered new interface driver snd-usb-audio
[ 4.102395] uvcvideo: Found UVC 1.00 device HD Pro Webcam C920 (046d:082d)
[ 4.107493] input: HD Pro Webcam C920 as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10:1.0/input/input20
[ 4.107559] usbcore: registered new interface driver uvcvideo
[ 4.107561] USB Video Class driver (1.1.1)
[ 4.937852] usbcore: registered new interface driver usbserial
[ 4.937885] usbcore: registered new interface driver usbserial_generic
[ 4.937908] usbserial: USB Serial support registered for generic
[ 4.939153] usbcore: registered new interface driver pl2303
[ 4.939185] usbserial: USB Serial support registered for pl2303
[ 4.939226] pl2303 1-7:1.0: pl2303 converter detected
[ 4.940232] usbcore: registered new interface driver ftdi_sio
[ 4.940262] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 4.940656] ftdi_sio 1-13:1.0: FTDI USB Serial Device converter detected
[ 4.940726] usb 1-13: Detected FT8U232AM
[ 4.940961] usb 1-7: pl2303 converter now attached to ttyUSB1
[ 4.941080] usb 1-13: FTDI USB Serial Device converter now attached to ttyUSB0
[ 4.992543] scsi 6:0:0:0: Direct-Access Generic Ultra HS-SD/MMC 1.82 PQ: 0 ANSI: 0
[ 4.992949] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 5.009092] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 5.373858] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.419613] RPC: Registered named UNIX socket transport module.
[ 5.419616] RPC: Registered udp transport module.
[ 5.419616] RPC: Registered tcp transport module.
[ 5.419617] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 5.421804] FS-Cache: Loaded
[ 5.426760] FS-Cache: Netfs 'nfs' registered for caching
[ 5.431562] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 5.451328] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 5.455449] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 5.467644] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 5.562065] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 5.562067] Bluetooth: BNEP filters: protocol multicast
[ 5.562070] Bluetooth: BNEP socket layer initialized
[ 5.603483] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 5.605451] NFSD: starting 90-second grace period (net ffffffff81ad7f80)
[ 5.675911] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 6.199364] Ebtables v2.0 registered
[ 8.789589] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[ 8.789621] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.913615] BUG: unable to handle kernel NULL pointer dereference at (null)
[ 14.913660] IP: [<ffffffff813ca6bf>] modify_irte+0x4f/0xe0
[ 14.913691] PGD 40a0df067 PUD 40a1da067 PMD 0
[ 14.913717] Oops: 0000 [#1] SMP
[ 14.913737] Modules linked in: ebtable_filter ebtables binfmt_misc cpufreq_conservative cpufreq_powersave cpufreq_userspace cpufreq_stats bnep nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables xt_limit nf_log_ipv6 nf_log_common xt_LOG xt_tcpudp nf_conntrack_ipv6 nf_defrag_ipv6 xt_conntrack nf_conntrack ip6table_filter ip6_tables x_tables nfsd auth_rpcgss oid_registry nfs_acl nfs lockd grace fscache sunrpc ftdi_sio pl2303 usbserial uas uvcvideo videobuf2_vmalloc videobuf2_memops usb_storage videobuf2_core v4l2_common videodev snd_usb_audio snd_usbmidi_lib snd_rawmidi snd_seq_device media btusb btrtl btbcm btintel bluetooth rfkill tpm_infineon deflate ctr twofish_generic twofish_avx_x86_64 twofish_x86_64_3way twofish_x86_64 twofish_common camellia_generic camellia_aesni_avx2 camellia_aesni_avx_x86_64
[ 14.914147] camellia_x86_64 serpent_avx2 serpent_avx_x86_64 serpent_sse2_x86_64 xts serpent_generic blowfish_generic blowfish_x86_64 blowfish_common cast5_avx_x86_64 cast5_generic cast_common des_generic cbc cmac xcbc rmd160 sha512_ssse3 sha512_generic crypto_null af_key xfrm_algo snd_hda_codec_hdmi iTCO_wdt iTCO_vendor_support ppdev x86_pkg_temp_thermal intel_powerclamp intel_rapl iosf_mbi kvm_intel kvm crct10dif_pclmul crc32_pclmul ghash_clmulni_intel evdev sha256_ssse3 sha256_generic hmac drbg ansi_cprng aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd snd_hda_codec_realtek snd_hda_codec_generic psmouse serio_raw pcspkr i915 sg lpc_ich snd_hda_intel i2c_i801 snd_hda_codec mfd_core snd_hda_core snd_hwdep snd_pcm drm_kms_helper snd_timer snd mei_me shpchp drm soundcore mei i2c_algo_bit
[ 14.914560] battery parport_pc 8250_fintek fujitsu_laptop parport video tpm_tis tpm button processor hid_generic usbhid hid sch5636 sch56xx_common coretemp loop ecryptfs autofs4 ext4 crc16 mbcache jbd2 sr_mod cdrom sd_mod ahci libahci crc32c_intel libata xhci_pci ehci_pci xhci_hcd ehci_hcd scsi_mod e1000e ptp usbcore pps_core usb_common thermal fan thermal_sys
[ 14.914772] CPU: 2 PID: 1451 Comm: irqbalance Not tainted 4.2.0-1-amd64 #1 Debian 4.2.1-2
[ 14.914807] Hardware name: FUJITSU ESPRIMO P920/D3222-A1, BIOS V4.6.5.4 R1.10.0 for D3222-A1x 09/16/2013
[ 14.914846] task: ffff8800d5ab2040 ti: ffff880407b00000 task.ti: ffff880407b00000
[ 14.914877] RIP: 0010:[<ffffffff813ca6bf>] [<ffffffff813ca6bf>] modify_irte+0x4f/0xe0
[ 14.914913] RSP: 0018:ffff880407b03cf8 EFLAGS: 00010046
[ 14.914935] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
[ 14.914964] RDX: 0000000000000000 RSI: ffff880409739218 RDI: ffffffff81d18500
[ 14.914994] RBP: 0000000000000086 R08: 0000000000000008 R09: 0000000000000000
[ 14.915022] R10: 0000000000000008 R11: 0000000000000000 R12: 0000000000000000
[ 14.915052] R13: ffff880409739200 R14: ffff880409739218 R15: ffff88040bd924c0
[ 14.915082] FS: 00007fb3c5bd3740(0000) GS:ffff88041e300000(0000) knlGS:0000000000000000
[ 14.915115] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 14.915140] CR2: 0000000000000000 CR3: 000000040a71c000 CR4: 00000000001406e0
[ 14.915169] Stack:
[ 14.915179] 0000000000000018 ffff88040858e400 ffff88040858e400 0000000000000000
[ 14.915218] ffff88040858e580 ffff880409739200 ffff88040858e400 ffff880407b03e38
[ 14.915255] 0000000000000000 ffffffff813ca8e7 ffff88040858b608 ffff88040858b608
[ 14.915294] Call Trace:
[ 14.915309] [<ffffffff813ca8e7>] ? intel_ir_set_affinity+0xa7/0xb0
[ 14.915338] [<ffffffff810c51cc>] ? msi_domain_set_affinity+0x1c/0x60
[ 14.915367] [<ffffffff810bea04>] ? irq_do_set_affinity+0x34/0xb0
[ 14.915393] [<ffffffff810bec5f>] ? irq_set_affinity_locked+0x10f/0x140
[ 14.915421] [<ffffffff810becd1>] ? __irq_set_affinity+0x41/0x60
[ 14.915448] [<ffffffff810c412e>] ? write_irq_affinity.isra.7+0xbe/0xe0
[ 14.915479] [<ffffffff811b9f32>] ? __sb_start_write+0x42/0xe0
[ 14.915506] [<ffffffff81219117>] ? proc_reg_write+0x47/0x70
[ 14.915531] [<ffffffff811b7d24>] ? vfs_write+0xa4/0x190
[ 14.915555] [<ffffffff811b89d2>] ? SyS_write+0x42/0xa0
[ 14.915580] [<ffffffff8154de72>] ? system_call_fast_compare_end+0xc/0x6b
[ 14.915608] Code: d1 81 49 89 f6 e8 82 35 18 00 4d 8b 7d 00 41 0f b7 5d 08 48 89 c5 41 0f b7 55 0a 49 8b 87 90 00 00 00 01 d3 4c 63 e3 49 c1 e4 04 <4c> 03 20 49 8b 06 49 89 04 24 49 8b 46 08 49 89 44 24 08 41 f6
[ 14.915806] RIP [<ffffffff813ca6bf>] modify_irte+0x4f/0xe0
[ 14.915832] RSP <ffff880407b03cf8>
[ 14.915848] CR2: 0000000000000000
[ 14.915864] ---[ end trace 24ce3ffb154bc071 ]---
Reply to: