[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#797784: linux-image-4.1.0-0.bpo.1-amd64: resuming from hibernate highly unreliable



Package: src:linux
Version: 4.1.3-1~bpo8+1
Severity: normal

Dear Maintainer,

Very often (about 50% of the time), when resuming from a hibernate, Linux gives up,
reboots, and abandons the saved hibernation.

This is on a Lenovo T420, with Intel graphics and X-Windows currently running.

This did not happen on the last Linux I was using, linux-image-3.16.0-4-amd64.

Charles

-- Package-specific info:
** Version:
Linux version 4.1.0-0.bpo.1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-10) ) #1 SMP Debian 4.1.3-1~bpo8+1 (2015-08-12)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.1.0-0.bpo.1-amd64 root=UUID=43748e9f-d979-4b26-a058-8afe3fb61fad ro quiet i915.semaphores=1 i915.i915_enable_rc6=0 processor.ignore_ppc=1

** Tainted: UO (4160)
 * Userspace-defined naughtiness.
 * Out-of-tree module has been loaded.

** Kernel log:
[    4.257593] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 1000 BGN, REV=0x6C
[    4.257688] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    4.262087] uvcvideo: Found UVC 1.00 device Integrated Camera (04f2:b221)
[    4.275234] input: Integrated Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input17
[    4.275342] usbcore: registered new interface driver uvcvideo
[    4.275345] USB Video Class driver (1.1.1)
[    4.284060] iTCO_vendor_support: vendor-support=0
[    4.284637] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    4.284676] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
[    4.284750] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    4.285800] alg: No test for crc32 (crc32-pclmul)
[    4.293644] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    4.607005] intel_rapl: Found RAPL domain package
[    4.607020] intel_rapl: Found RAPL domain core
[    4.607032] intel_rapl: Found RAPL domain uncore
[    4.621688] cfg80211: World regulatory domain updated:
[    4.621699] cfg80211:  DFS Master region: unset
[    4.621704] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[    4.621712] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.621718] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[    4.621723] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[    4.621730] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[    4.621737] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[    4.621743] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[    4.621747] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[    4.621753] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[    4.904642] Adding 16777212k swap on /dev/sda2.  Priority:-1 extents:1 across:16777212k SSFS
[    4.925870] EXT4-fs (sda1): re-mounted. Opts: (null)
[    4.963701] EXT4-fs (sda1): re-mounted. Opts: (null)
[    5.005400] psmouse serio1: synaptics: queried max coordinates: x [..5888], y [..4820]
[    5.080383] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 0, fw id: 578367
[    5.080393] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    5.107930] lp: driver loaded but no devices found
[    5.113751] ppdev: user-space parallel port driver
[    5.126558] loop: module loaded
[    5.128937] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[    5.136451] thinkpad_ec: thinkpad_ec 0.41 loaded.
[    5.137170] tp_smapi 0.41 loading...
[    5.137344] tp_smapi successfully loaded (smapi_port=0xb2).
[    5.143256] fuse init (API version 7.23)
[    5.178867] EXT4-fs (sdb1): couldn't mount as ext3 due to feature incompatibilities
[    5.179146] EXT4-fs (sdb1): couldn't mount as ext2 due to feature incompatibilities
[    6.192582] EXT4-fs (sdb1): recovery complete
[    6.216388] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
[    6.557140] RPC: Registered named UNIX socket transport module.
[    6.557145] RPC: Registered udp transport module.
[    6.557147] RPC: Registered tcp transport module.
[    6.557149] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    6.562966] FS-Cache: Loaded
[    6.571703] FS-Cache: Netfs 'nfs' registered for caching
[    6.583523] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[    7.086809] Bluetooth: Core ver 2.20
[    7.086825] NET: Registered protocol family 31
[    7.086827] Bluetooth: HCI device and connection manager initialized
[    7.086831] Bluetooth: HCI socket layer initialized
[    7.086834] Bluetooth: L2CAP socket layer initialized
[    7.086844] Bluetooth: SCO socket layer initialized
[    7.095191] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    7.095195] Bluetooth: BNEP filters: protocol multicast
[    7.095200] Bluetooth: BNEP socket layer initialized
[    7.108526] systemd-hostnamed[3123]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
[    7.824222] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    7.831605] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[    7.867320] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[    7.874686] iwlwifi 0000:03:00.0: Radio type=0x0-0x0-0x3
[   10.252928] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[   10.513196] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/serio2/input/input18
[   12.569481] systemd-logind[3532]: New seat seat0.
[   12.570391] systemd-logind[3532]: Watching system buttons on /dev/input/event3 (Power Button)
[   12.570533] systemd-logind[3532]: Watching system buttons on /dev/input/event4 (Video Bus)
[   12.570714] systemd-logind[3532]: Watching system buttons on /dev/input/event1 (Lid Switch)
[   12.570891] systemd-logind[3532]: Watching system buttons on /dev/input/event2 (Sleep Button)
[   12.571037] systemd-logind[3532]: Watching system buttons on /dev/input/event5 (ThinkPad Extra Buttons)
[   12.580118] systemd-logind[3532]: Failed to start user service: Unknown unit: user@1000.service
[   12.587351] systemd-logind[3532]: New session 1 of user charles.
[   57.808090] wlan0: authenticate with fa:16:54:19:b2:98
[   57.812358] wlan0: send auth to fa:16:54:19:b2:98 (try 1/3)
[   57.813987] wlan0: authenticated
[   57.816283] wlan0: associate with fa:16:54:19:b2:98 (try 1/3)
[   57.818853] wlan0: RX AssocResp from fa:16:54:19:b2:98 (capab=0x8531 status=0 aid=2)
[   57.823499] wlan0: associated
[  283.613998] cfg80211: Calling CRDA to update world regulatory domain
[  283.620398] cfg80211: World regulatory domain updated:
[  283.620409] cfg80211:  DFS Master region: unset
[  283.620413] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[  283.620421] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  283.620428] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[  283.620433] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[  283.620439] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[  283.620446] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[  283.620452] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[  283.620457] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[  283.620463] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[  284.106964] wlan0: authenticate with fa:16:54:19:b2:98
[  284.110533] wlan0: send auth to fa:16:54:19:b2:98 (try 1/3)
[  284.216961] wlan0: send auth to fa:16:54:19:b2:98 (try 2/3)
[  284.218803] wlan0: authenticated
[  284.220951] wlan0: associate with fa:16:54:19:b2:98 (try 1/3)
[  284.223809] wlan0: RX AssocResp from fa:16:54:19:b2:98 (capab=0x8531 status=0 aid=5)
[  284.227243] wlan0: associated

** Model information
sys_vendor: LENOVO
product_name: 4177CTO
product_version: ThinkPad T420
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: 83ET53WW (1.23 )
board_vendor: LENOVO
board_name: 4177CTO
board_version: Not Available

** Loaded modules:
ctr
ccm
bnep
bluetooth
cpufreq_userspace
cpufreq_stats
cpufreq_conservative
cpufreq_powersave
binfmt_misc
uinput
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
fuse
tp_smapi(O)
thinkpad_ec(O)
joydev
loop
parport_pc
ppdev
lp
parport
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
iosf_mbi
coretemp
kvm_intel
kvm
crct10dif_pclmul
arc4
iTCO_wdt
crc32_pclmul
iTCO_vendor_support
ghash_clmulni_intel
uvcvideo
videobuf2_vmalloc
videobuf2_memops
iwldvm
videobuf2_core
v4l2_common
mac80211
videodev
media
snd_hda_codec_hdmi
iwlwifi
aesni_intel
aes_x86_64
snd_hda_codec_conexant
lrw
gf128mul
glue_helper
ablk_helper
psmouse
cryptd
snd_hda_codec_generic
pcspkr
serio_raw
cfg80211
lpc_ich
mfd_core
i2c_i801
snd_hda_intel
snd_hda_controller
snd_hda_codec
snd_hda_core
thinkpad_acpi
snd_hwdep
nvram
snd_pcm
rfkill
tpm_tis
battery
ac
snd_timer
tpm
snd
soundcore
mei_me
processor
evdev
shpchp
mei
ext4
crc16
mbcache
jbd2
btrfs
xor
raid6_pq
sg
sd_mod
ahci
libahci
libata
crc32c_intel
scsi_mod
i915
i2c_algo_bit
firewire_ohci
sdhci_pci
ehci_pci
drm_kms_helper
firewire_core
ehci_hcd
crc_itu_t
sdhci
e1000e
mmc_core
usbcore
ptp
drm
pps_core
usb_common
thermal
wmi
video
thermal_sys
button

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 2nd Generation Core Processor Family DRAM Controller [8086:0104] (rev 09)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:02.0 VGA compatible controller [0300]: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller [8086:0126] (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 26
	Region 0: Memory at d0000000 (64-bit, non-prefetchable) [size=4M]
	Region 2: Memory at c0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 5000 [size=64]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:16.0 Communication controller [0780]: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 [8086:1c3a] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 27
	Region 0: Memory at d2625000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me

00:19.0 Ethernet controller [0200]: Intel Corporation 82579LM Gigabit Network Connection [8086:1502] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 24
	Region 0: Memory at d2600000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at d262b000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 5080 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 [8086:1c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d262a000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller [8086:1c20] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 28
	Region 0: Memory at d2620000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 [8086:1c10] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 [8086:1c12] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	Memory behind bridge: d2500000-d25fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.3 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 [8086:1c16] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
	I/O behind bridge: 00004000-00004fff
	Memory behind bridge: d1d00000-d24fffff
	Prefetchable memory behind bridge: 00000000d0400000-00000000d0bfffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.4 PCI bridge [0604]: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 [8086:1c18] (rev b4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: d1400000-d1cfffff
	Prefetchable memory behind bridge: 00000000d0c00000-00000000d13fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 [8086:1c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at d2629000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation QM67 Express Chipset Family LPC Controller [8086:1c4f] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller [8086:1c03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 25
	Region 0: I/O ports at 50a8 [size=8]
	Region 1: I/O ports at 50bc [size=4]
	Region 2: I/O ports at 50a0 [size=8]
	Region 3: I/O ports at 50b8 [size=4]
	Region 4: I/O ports at 5060 [size=32]
	Region 5: Memory at d2628000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller [8086:1c22] (rev 04)
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at d2624000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at efa0 [size=32]
	Kernel driver in use: i801_smbus

03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [Condor Peak] [8086:0084]
	Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN [8086:1315]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 29
	Region 0: Memory at d2500000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi

0d:00.0 System peripheral [0880]: Ricoh Co Ltd MMC/SD Host Controller [1180:e822] (rev 08) (prog-if 01)
	Subsystem: Lenovo Device [17aa:2133]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d1401000 (32-bit, non-prefetchable) [size=256]
	Capabilities: <access denied>
	Kernel driver in use: sdhci-pci

0d:00.3 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 PCIe IEEE 1394 Controller [1180:e832] (rev 04) (prog-if 10 [OHCI])
	Subsystem: Lenovo Device [17aa:21ce]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin D routed to IRQ 19
	Region 0: Memory at d1400000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: firewire_ohci


** USB devices:
Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 04f2:b221 Chicony Electronics Co., Ltd integrated camera
Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: 8.1
  APT prefers stable
  APT policy: (900, 'stable'), (500, 'stable-updates')
Architecture: amd64 (x86_64)
Foreign Architectures: i386

Kernel: Linux 4.1.0-0.bpo.1-amd64 (SMP w/4 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)

Versions of packages linux-image-4.1.0-0.bpo.1-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.56
ii  initramfs-tools [linux-initramfs-tool]  0.120
ii  kmod                                    18-3
ii  linux-base                              4.0~bpo8+1

Versions of packages linux-image-4.1.0-0.bpo.1-amd64 recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3

Versions of packages linux-image-4.1.0-0.bpo.1-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  extlinux                3:6.03+dfsg-5
ii  grub-pc                 2.02~beta2-22
pn  linux-doc-4.1           <none>

Versions of packages linux-image-4.1.0-0.bpo.1-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.44~bpo8+1
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-4.1.0-0.bpo.1-amd64/postinst/depmod-error-initrd-4.1.0-0.bpo.1-amd64: false
  linux-image-4.1.0-0.bpo.1-amd64/postinst/mips-initrd-4.1.0-0.bpo.1-amd64:
  linux-image-4.1.0-0.bpo.1-amd64/prerm/removing-running-kernel-4.1.0-0.bpo.1-amd64: true


Reply to: