Bug#797102: linux-image-4.0.0-1-amd64: radeon KMS display regression - monitor blank
Package: src:linux
Version: 4.0.2-1
Severity: normal
Hello,
After power outage when my system rebooted my display would show just
"Input not supported" message.
This is the earliest broken kernel and this goes up to 4.2.0-rc8
Out of the kernels I have installed latest working is
linux-image-3.18.0-trunk 3.18.5-1~exp1
The monitor is connected over displayport and works in 1920x1080 but not
the native 2560x1440 resolution.
This is probably upstream problem.
RADEON(0): Chipset: "ATI Radeon HD 5670" (ChipID = 0x68d8)
I guess I will just remove the newer kernels.
Thanks
Michal
-- Package-specific info:
** Version:
Linux version 4.0.0-1-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.2 (Debian 4.9.2-16) ) #1 SMP Debian 4.0.2-1 (2015-05-11)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.0.0-1-amd64 root=UUID=c24506ba-3af2-456e-a23c-53fa182a57bf ro
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 13.257388] uvd vclk: 0 dclk: 0
[ 13.257388] power level 0 sclk: 15700 mclk: 30000 vddc: 1000 vddci: 0
[ 13.257389] power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0
[ 13.257389] power level 2 sclk: 77500 mclk: 100000 vddc: 1100 vddci: 0
[ 13.257390] status: c
[ 13.257390] switching to power state:
[ 13.257391] ui class: performance
[ 13.257391] internal class: none
[ 13.257392] caps: video
[ 13.257392] uvd vclk: 0 dclk: 0
[ 13.257393] power level 0 sclk: 40000 mclk: 100000 vddc: 1100 vddci: 0
[ 13.257393] power level 1 sclk: 40000 mclk: 100000 vddc: 1100 vddci: 0
[ 13.257394] power level 2 sclk: 77500 mclk: 100000 vddc: 1100 vddci: 0
[ 13.257394] status: r
[ 13.361638] Console: switching to colour frame buffer device 160x64
[ 13.365439] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
[ 13.365442] radeon 0000:01:00.0: registered panic notifier
[ 13.376066] [drm] Initialized radeon 2.41.0 20080528 for 0000:01:00.0 on minor 0
[ 13.763407] usbcore: registered new interface driver usbserial
[ 13.763426] usbcore: registered new interface driver usbserial_generic
[ 13.763442] usbserial: USB Serial support registered for generic
[ 13.766615] usbcore: registered new interface driver pl2303
[ 13.766634] usbserial: USB Serial support registered for pl2303
[ 13.766660] pl2303 7-1:1.0: pl2303 converter detected
[ 13.778312] usb 7-1: pl2303 converter now attached to ttyUSB0
[ 24.558494] EXT4-fs (sdf3): mounted filesystem with ordered data mode. Opts: (null)
[ 24.577883] EXT4-fs (sdf4): mounted filesystem with ordered data mode. Opts: (null)
[ 24.591748] EXT4-fs (sda): mounted filesystem with ordered data mode. Opts: (null)
[ 24.744279] tun: Universal TUN/TAP device driver, 1.6
[ 24.744282] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 24.878772] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 24.884052] device tap0 entered promiscuous mode
[ 24.886089] device tap1 entered promiscuous mode
[ 24.886939] device tap2 entered promiscuous mode
[ 24.888454] device tap3 entered promiscuous mode
[ 24.889376] tapbr: port 4(tap3) entered forwarding state
[ 24.889381] tapbr: port 4(tap3) entered forwarding state
[ 24.889383] tapbr: port 3(tap2) entered forwarding state
[ 24.889385] tapbr: port 3(tap2) entered forwarding state
[ 24.889387] tapbr: port 2(tap1) entered forwarding state
[ 24.889389] tapbr: port 2(tap1) entered forwarding state
[ 24.889391] tapbr: port 1(tap0) entered forwarding state
[ 24.889392] tapbr: port 1(tap0) entered forwarding state
[ 25.705977] Adding 5191676k swap on /scratch/build/swap. Priority:1 extents:1505 across:5583632k SSFS
[ 25.744030] tapbr: port 1(tap0) entered disabled state
[ 25.744051] tapbr: port 2(tap1) entered disabled state
[ 25.744061] tapbr: port 3(tap2) entered disabled state
[ 25.744070] tapbr: port 4(tap3) entered disabled state
[ 25.961636] iscsi: registered transport (iser)
[ 30.622880] RPC: Registered named UNIX socket transport module.
[ 30.622883] RPC: Registered udp transport module.
[ 30.622884] RPC: Registered tcp transport module.
[ 30.622884] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 30.690306] FS-Cache: Loaded
[ 30.780832] FS-Cache: Netfs 'nfs' registered for caching
[ 30.916481] systemd-journald[234]: Received request to flush runtime journal from PID 1
[ 31.056674] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 31.281157] oss_hdaudio: HDA codec 0x11d41882 not known yet
[ 31.291008] oss_hdaudio: Too many connections(B) for widget 35 (24)
[ 31.296761] oss_hdaudio: HDA codec 0x11d41882 not known yet
[ 32.660947] Process accounting resumed
[ 33.998231] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 33.999047] NFSD: starting 90-second grace period (net ffffffff818c4b80)
[ 36.537890] switching from power state:
[ 36.537894] ui class: performance
[ 36.537895] internal class: none
[ 36.537896] caps: video
[ 36.537898] uvd vclk: 0 dclk: 0
[ 36.537899] power level 0 sclk: 40000 mclk: 100000 vddc: 1100 vddci: 0
[ 36.537900] power level 1 sclk: 40000 mclk: 100000 vddc: 1100 vddci: 0
[ 36.537901] power level 2 sclk: 77500 mclk: 100000 vddc: 1100 vddci: 0
[ 36.537902] status: c
[ 36.537903] switching to power state:
[ 36.537904] ui class: performance
[ 36.537905] internal class: none
[ 36.537906] caps: single_disp video
[ 36.537907] uvd vclk: 0 dclk: 0
[ 36.537908] power level 0 sclk: 15700 mclk: 30000 vddc: 1000 vddci: 0
[ 36.537909] power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0
[ 36.537910] power level 2 sclk: 77500 mclk: 100000 vddc: 1100 vddci: 0
[ 36.537911] status: r
[ 38.197300] switching from power state:
[ 38.197303] ui class: performance
[ 38.197304] internal class: none
[ 38.197305] caps: single_disp video
[ 38.197307] uvd vclk: 0 dclk: 0
[ 38.197308] power level 0 sclk: 15700 mclk: 30000 vddc: 1000 vddci: 0
[ 38.197310] power level 1 sclk: 40000 mclk: 90000 vddc: 1000 vddci: 0
[ 38.197311] power level 2 sclk: 77500 mclk: 100000 vddc: 1100 vddci: 0
[ 38.197311] status: c
[ 38.197313] switching to power state:
[ 38.197313] ui class: performance
[ 38.197314] internal class: none
[ 38.197315] caps: video
[ 38.197316] uvd vclk: 0 dclk: 0
[ 38.197317] power level 0 sclk: 40000 mclk: 100000 vddc: 1100 vddci: 0
[ 38.197318] power level 1 sclk: 40000 mclk: 100000 vddc: 1100 vddci: 0
[ 38.197319] power level 2 sclk: 77500 mclk: 100000 vddc: 1100 vddci: 0
[ 38.197320] status: r
[ 40.556669] avant-window-na[2341]: segfault at 0 ip 00007f31026566c0 sp 00007fff24cf47e0 error 4 in libdesktop-agnostic-cfg.so.0.4.0[7f310264a000+1d000]
** Model information
sys_vendor:
product_name:
product_version:
chassis_vendor:
chassis_version:
bios_vendor: Intel Corp.
bios_version: CBQ4510H.86A.0133.2011.0810.1010
board_vendor: Intel Corporation
board_name: DQ45CB
board_version: AAE30148-302
** Loaded modules:
binfmt_misc
oss_hdaudio(O)
osscore(O)
nfsd
auth_rpcgss
nfsv2
oid_registry
nfs_acl
nfs
lockd
grace
fscache
sunrpc
ib_iser
rdma_cm
iw_cm
ib_cm
ib_sa
ib_mad
ib_core
ib_addr
bridge
stp
llc
tun
pl2303
usbserial
uvcvideo
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
joydev
evdev
v4l2_common
videodev
media
coretemp
kvm_intel
kvm
psmouse
serio_raw
i2c_i801
radeon
lpc_ich
mfd_core
ttm
drm_kms_helper
drm
i2c_algo_bit
i2c_core
loop
fuse
tpm_tis
tpm
shpchp
video
button
8250_fintek
mei_me
mei
acpi_cpufreq
processor
thermal_sys
parport_pc
ppdev
lp
parport
autofs4
ext4
crc16
mbcache
jbd2
crc32c_generic
iscsi_tcp
libiscsi_tcp
libiscsi
scsi_transport_iscsi
hid_generic
usbhid
hid
usb_storage
sg
sd_mod
ata_piix
firewire_ohci
ahci
libahci
firewire_core
crc_itu_t
ata_generic
libata
scsi_mod
uhci_hcd
e1000e
ptp
pps_core
ehci_pci
ehci_hcd
usbcore
usb_common
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 4 Series Chipset DRAM Controller [8086:2e10] (rev 03)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
00:01.0 PCI bridge [0604]: Intel Corporation 4 Series Chipset PCI Express Root Port [8086:2e11] (rev 03) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: d0000000-e00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:03.0 Communication controller [0780]: Intel Corporation 4 Series Chipset HECI Controller [8086:2e14] (rev 03)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 31
Region 0: Memory at e022a000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:03.2 IDE interface [0101]: Intel Corporation 4 Series Chipset PT IDER Controller [8086:2e16] (rev 03) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: I/O ports at f210 [size=8]
Region 1: I/O ports at f200 [size=4]
Region 2: I/O ports at f1f0 [size=8]
Region 3: I/O ports at f1e0 [size=4]
Region 4: I/O ports at f1d0 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_generic
00:03.3 Serial controller [0700]: Intel Corporation 4 Series Chipset Serial KT Controller [8086:2e17] (rev 03) (prog-if 02 [16550])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at f1c0 [size=8]
Region 1: Memory at e0229000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: serial
00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM-3 Gigabit Network Connection [8086:10de] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at e0200000 (32-bit, non-prefetchable) [size=128K]
Region 1: Memory at e0228000 (32-bit, non-prefetchable) [size=4K]
Region 2: I/O ports at f100 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
00:1a.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #4 [8086:3a67] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 4: I/O ports at f0e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #5 [8086:3a68] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at f0c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #6 [8086:3a69] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f0a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #2 [8086:3a6c] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e0227000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 82801JD/DO (ICH10 Family) HD Audio Controller [8086:3a6e] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e0220000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: oss_hdaudio
00:1d.0 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #1 [8086:3a64] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 4: I/O ports at f080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #2 [8086:3a65] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 4: I/O ports at f060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB UHCI Controller #3 [8086:3a66] (rev 02) (prog-if 00 [UHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 18
Region 4: I/O ports at f040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB controller [0c03]: Intel Corporation 82801JD/DO (ICH10 Family) USB2 EHCI Controller #1 [8086:3a6a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at e0226000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev a2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
Memory behind bridge: e0100000-e01fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801JDO (ICH10DO) LPC Interface Controller [8086:3a14] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 82801JD/DO (ICH10 Family) SATA AHCI Controller [8086:3a02] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 30
Region 0: I/O ports at f1b0 [size=8]
Region 1: I/O ports at f1a0 [size=4]
Region 2: I/O ports at f190 [size=8]
Region 3: I/O ports at f180 [size=4]
Region 4: I/O ports at f020 [size=32]
Region 5: Memory at e0225000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 82801JD/DO (ICH10 Family) SMBus Controller [8086:3a60] (rev 02)
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at e0224000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at f000 [size=32]
Kernel driver in use: i801_smbus
00:1f.5 IDE interface [0101]: Intel Corporation 82801JD/DO (ICH10 Family) 2-port SATA IDE Controller [8086:3a06] (rev 02) (prog-if 85 [Master SecO PriO])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 19
Region 0: I/O ports at f170 [size=8]
Region 1: I/O ports at f160 [size=4]
Region 2: I/O ports at f150 [size=8]
Region 3: I/O ports at f140 [size=4]
Region 4: I/O ports at f130 [size=16]
Region 5: I/O ports at f120 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Redwood XT [Radeon HD 5670/5690/5730] [1002:68d8] (prog-if 00 [VGA controller])
Subsystem: PC Partner Limited / Sapphire Technology Radeon HD 5670 [174b:e151]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 32
Region 0: Memory at d0000000 (64-bit, prefetchable) [size=256M]
Region 2: Memory at e0020000 (64-bit, non-prefetchable) [size=128K]
Region 4: I/O ports at e000 [size=256]
Expansion ROM at e0000000 [disabled] [size=128K]
Capabilities: <access denied>
Kernel driver in use: radeon
01:00.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Redwood HDMI Audio [Radeon HD 5000 Series] [1002:aa60]
Subsystem: PC Partner Limited / Sapphire Technology Device [174b:aa60]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 11
Region 0: Memory at e0040000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
02:01.0 FireWire (IEEE 1394) [0c00]: LSI Corporation FW322/323 [TrueFire] 1394a Controller [11c1:5811] (rev 70) (prog-if 10 [OHCI])
Subsystem: Intel Corporation Device [8086:1003]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (3000ns min, 6000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 22
Region 0: Memory at e0101000 (32-bit, non-prefetchable) [size=4K]
Region 1: Memory at e0100000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: firewire_ohci
** USB devices:
Bus 002 Device 008: ID 05e3:0741 Genesys Logic, Inc.
Bus 002 Device 007: ID 047d:2048 Kensington Orbit Trackball with Scroll Ring
Bus 002 Device 006: ID 05e3:0736 Genesys Logic, Inc. microSD Reader/Writer
Bus 002 Device 005: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 003: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 008 Device 002: ID 04d9:1503 Holtek Semiconductor, Inc. Shortboard Lefty
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 046d:0825 Logitech, Inc. Webcam C270
Bus 001 Device 003: ID 090c:6200 Silicon Motion, Inc. - Taiwan (formerly Feiya Technology Corp.) microSD card reader
Bus 001 Device 002: ID 0bda:0119 Realtek Semiconductor Corp. Storage Device (SD card reader)
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
-- System Information:
Debian Release: 8.1
APT prefers stable
APT policy: (990, 'stable'), (500, 'oldstable'), (171, 'unstable'), (151, 'experimental')
Architecture: amd64 (x86_64)
Foreign Architectures: i386, armhf
Kernel: Linux 4.0.0-1-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-4.0.0-1-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-4.0.0-1-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-4.0.0-1-amd64 suggests:
pn debian-kernel-handbook <none>
ii extlinux 3:6.03+dfsg-5
ii grub-pc 2.02~beta2-22
pn linux-doc-4.0 <none>
Versions of packages linux-image-4.0.0-1-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
ii firmware-linux-nonfree 0.43
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
linux-image-4.0.0-1-amd64/postinst/depmod-error-initrd-4.0.0-1-amd64: false
linux-image-4.0.0-1-amd64/prerm/removing-running-kernel-4.0.0-1-amd64: true
linux-image-4.0.0-1-amd64/postinst/mips-initrd-4.0.0-1-amd64:
Reply to: