[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#792778: nouveau: screen sometimes remains blank after "xset dpms force off"



Package: src:linux
Version: 3.16.7-ckt11-1
Severity: normal

After I blank the screen of my laptop with "xset dpms force off", it
is usually unblanked as expected when I type a key or move the mouse,
but not always. When this occurs, the screen is no longer off, in the
sense I can see some light on it, but nothing is displayed.

As a workaround, I can suspend the machine by closing the lid, and
wake it up just after. However this might yield network problems
with the current connections.

Note: this is an old kernel, but the more recent ones do not work with
nouveau (see other bug reports in the Debian BTS and upstream).

-- Package-specific info:
** Version:
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt11-1 (2015-05-24)

** Command line:
BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/zira--vg-root ro quiet

** Not tainted

** Kernel log:
[180597.911661] smpboot: CPU 6 is now offline
[180597.912318] intel_pstate CPU 7 exiting
[180598.015785] smpboot: CPU 7 is now offline
[180598.019545] ACPI: Low-level resume complete
[180598.019620] PM: Restoring platform NVS memory
[180598.020384] Enabling non-boot CPUs ...
[180598.020594] x86: Booting SMP configuration:
[180598.020597] smpboot: Booting Node 0 Processor 1 APIC 0x1
[180598.036385] Intel pstate controlling: cpu 1
[180598.036490] CPU1 is up
[180598.036659] smpboot: Booting Node 0 Processor 2 APIC 0x2
[180598.051986] Intel pstate controlling: cpu 2
[180598.052066] CPU2 is up
[180598.052218] smpboot: Booting Node 0 Processor 3 APIC 0x3
[180598.067179] Intel pstate controlling: cpu 3
[180598.067243] CPU3 is up
[180598.067363] smpboot: Booting Node 0 Processor 4 APIC 0x4
[180598.082104] Intel pstate controlling: cpu 4
[180598.082158] CPU4 is up
[180598.082261] smpboot: Booting Node 0 Processor 5 APIC 0x5
[180598.096884] Intel pstate controlling: cpu 5
[180598.096931] CPU5 is up
[180598.097019] smpboot: Booting Node 0 Processor 6 APIC 0x6
[180598.111431] Intel pstate controlling: cpu 6
[180598.111473] CPU6 is up
[180598.111554] smpboot: Booting Node 0 Processor 7 APIC 0x7
[180598.125876] Intel pstate controlling: cpu 7
[180598.125928] CPU7 is up
[180598.133869] ACPI: Waking up from system sleep state S3
[180598.318144] acpi LNXPOWER:02: Turning OFF
[180598.318167] acpi LNXPOWER:01: Turning OFF
[180598.366692] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[180598.366722] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[180598.366754] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[180598.380396] PM: noirq resume of devices complete after 62.133 msecs
[180598.380646] PM: early resume of devices complete after 0.226 msecs
[180598.380689] e1000e 0000:00:19.0: System wakeup disabled by ACPI
[180598.380714] mei_me 0000:00:16.0: irq 46 for MSI/MSI-X
[180598.380750] nouveau  [     DRM] re-enabling device...
[180598.380852] nouveau  [     DRM] resuming kernel object tree...
[180598.380872] nouveau  [   VBIOS][0000:01:00.0] running init tables
[180598.381035] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[180598.396180] sd 0:0:0:0: [sda] Starting disk
[180598.474499] e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
[180598.732554] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[180598.732567] ata4: SATA link down (SStatus 0 SControl 300)
[180598.732582] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[180598.740570] ata3: SATA link down (SStatus 0 SControl 300)
[180598.741979] nouveau E[   PIBUS][0000:01:00.0] HUB0: 0x614900 0x00800000 (0x1c708200)
[180598.743526] ata2.00: configured for UDMA/100
[180598.748763] usb 3-5: reset full-speed USB device number 3 using xhci_hcd
[180598.749493] ata1.00: configured for UDMA/133
[180598.811541] nouveau  [    VOLT][0000:01:00.0] GPU voltage: 600000uv
[180598.811544] nouveau  [  PTHERM][0000:01:00.0] fan management: automatic
[180598.811624] nouveau  [     CLK][0000:01:00.0] --: core 405 MHz memory 810 MHz 
[180598.812484] nouveau E[    PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x000260 [ TIMEOUT ]
[180598.812786] nouveau E[    PBUS][0000:01:00.0] MMIO write of 0xbad0011f FAULT at 0x000260 [ TIMEOUT ]
[180598.830999] nouveau  [     DRM] resuming client object trees...
[180598.831141] nouveau  [     DRM] resuming display...
[180598.877584] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880488d56800
[180598.877585] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880488d56848
[180598.877586] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880488d56890
[180598.877587] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880488d568d8
[180598.989022] usb 3-7: reset high-speed USB device number 4 using xhci_hcd
[180599.246372] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804884e7c40
[180599.301062] nouveau  [     DRM] resuming console...
[180599.341448] usb 3-12: reset full-speed USB device number 5 using xhci_hcd
[180599.469988] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804893dfd00
[180599.469989] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804893dfd48
[180599.469989] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff8804893dfd90
[180599.469990] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880488f9bac0
[180599.469990] xhci_hcd 0000:00:14.0: xHCI xhci_drop_endpoint called with disabled ep ffff880488f9bb08
[180599.902780] parport_pc 00:04: activated
[180600.034194] tpm_tis 00:07: TPM is disabled/deactivated (0x7)
[180600.036011] iwlwifi 0000:3d:00.0: L1 Enabled - LTR Enabled
[180600.036436] iwlwifi 0000:3d:00.0: L1 Enabled - LTR Enabled
[180600.060951] PM: resume of devices complete after 1678.259 msecs
[180600.061390] PM: Finishing wakeup.
[180600.061391] Restarting tasks ... 
[180600.061445] acpi PNP0501:00: Still not present
[180600.061799] pci_bus 0000:02: Allocating resources
[180600.061814] pci_bus 0000:3b: Allocating resources
[180600.062115] pcieport 0000:3c:03.0: bridge window [io  0x1000-0x0fff] to [bus 5f] add_size 1000
[180600.062155] pcieport 0000:3c:03.0: res[13]=[io  0x1000-0x0fff] get_res_add_size add_size 1000
[180600.062158] pcieport 0000:3c:03.0: BAR 13: can't assign io (size 0x1000)
[180600.062160] pcieport 0000:3c:03.0: BAR 13: can't assign io (size 0x1000)
[180600.070606] done.
[180600.073737] Bluetooth: hci0: read Intel version: 370710018002030d00
[180600.073766] bluetooth hci0: firmware: direct-loading firmware intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[180600.073768] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[180600.247967] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[180600.492848] psmouse serio2: alps: Unknown ALPS touchpad: E7=10 00 64, EC=10 00 64
[180601.233996] e1000e: eth0 NIC Link is Down
[180601.341786] e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
[180601.380592] psmouse serio3: synaptics: queried max coordinates: x [..5660], y [..4730]
[180601.415029] psmouse serio3: synaptics: queried min coordinates: x [1324..], y [1248..]
[180601.443942] e1000e 0000:00:19.0: irq 51 for MSI/MSI-X
[180601.444031] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[180604.757774] e1000e: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
[180604.757819] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready

** Model information
sys_vendor: Hewlett-Packard
product_name: HP ZBook 15 G2
product_version: A3008CD10003
chassis_vendor: Hewlett-Packard
chassis_version: 
bios_vendor: Hewlett-Packard
bios_version: M70 Ver. 01.08
board_vendor: Hewlett-Packard
board_name: 2253
board_version: KBC Version 03.10

** Loaded modules:
nouveau
joydev
xt_multiport
iptable_filter
ip_tables
x_tables
bnep
cpufreq_conservative
cpufreq_stats
cpufreq_userspace
cpufreq_powersave
nfsd
auth_rpcgss
oid_registry
nfs_acl
nfs
lockd
fscache
sunrpc
tpm_infineon
snd_hda_codec_hdmi
arc4
hp_wmi
sparse_keymap
mxm_wmi
iTCO_wdt
iTCO_vendor_support
ppdev
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
coretemp
kvm
pcspkr
psmouse
iwlmvm
serio_raw
mac80211
uvcvideo
snd_hda_codec_realtek
i2c_i801
videobuf2_vmalloc
videobuf2_memops
ecb
snd_hda_codec_generic
videobuf2_core
v4l2_common
videodev
media
btusb
iwlwifi
evdev
sg
ttm
rtsx_pci_ms
lpc_ich
snd_hda_intel
drm_kms_helper
memstick
bluetooth
snd_hda_controller
cfg80211
drm
snd_hda_codec
snd_hwdep
6lowpan_iphc
snd_pcm
i2c_algo_bit
rfkill
i2c_core
snd_timer
snd
soundcore
mei_me
mei
parport_pc
parport
hp_accel
lis3lv02d
input_polldev
shpchp
tpm_tis
wmi
hp_wireless
tpm
button
battery
video
processor
ac
autofs4
ext4
crc16
mbcache
jbd2
algif_skcipher
af_alg
dm_crypt
dm_mod
sd_mod
sr_mod
crc_t10dif
cdrom
crct10dif_generic
hid_generic
usbhid
hid
rtsx_pci_sdmmc
mmc_core
crct10dif_pclmul
crct10dif_common
crc32_pclmul
crc32c_intel
ghash_clmulni_intel
aesni_intel
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
ahci
libahci
libata
scsi_mod
rtsx_pci
mfd_core
ehci_pci
xhci_hcd
ehci_hcd
e1000e
ptp
usbcore
pps_core
usb_common
thermal
thermal_sys

** Network interface configuration:

source /etc/network/interfaces.d/*

auto lo
iface lo inet loopback

iface eth0 inet dhcp


** Network status:
*** IP interfaces and addresses:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 30:8d:99:25:ad:3f brd ff:ff:ff:ff:ff:ff
    inet 192.168.1.3/24 brd 192.168.1.255 scope global eth0
       valid_lft forever preferred_lft forever
    inet6 fe80::328d:99ff:fe25:ad3f/64 scope link 
       valid_lft forever preferred_lft forever
3: wlp61s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN group default qlen 1000
    link/ether cc:3d:82:a9:e3:ea brd ff:ff:ff:ff:ff:ff

*** Device statistics:
Inter-|   Receive                                                |  Transmit
 face |bytes    packets errs drop fifo frame compressed multicast|bytes    packets errs drop fifo colls carrier compressed
  eth0: 2014780173 1754902    0    0    0     0          0      7073 172491203 1049072    0    0    0     0       0          0
    lo:  957015    3223    0    0    0     0          0         0   957015    3223    0    0    0     0       0          0
wlp61s0:       0       0    0    0    0     0          0         0        0       0    0    0    0     0       0          0

*** Protocol statistics:
Ip:
    1102254 total packets received
    11 with invalid addresses
    0 forwarded
    0 incoming packets discarded
    1102041 incoming packets delivered
    1008828 requests sent out
    69 dropped because of missing route
Icmp:
    283 ICMP messages received
    6 input ICMP message failed.
    ICMP input histogram:
        destination unreachable: 283
    277 ICMP messages sent
    0 ICMP messages failed
    ICMP output histogram:
        destination unreachable: 277
IcmpMsg:
        InType3: 283
        OutType3: 277
Tcp:
    15220 active connections openings
    91 passive connection openings
    10 failed connection attempts
    257 connection resets received
    6 connections established
    1020719 segments received
    993379 segments send out
    635 segments retransmited
    728 bad segments received.
    4037 resets sent
    InCsumErrors: 9
Udp:
    48616 packets received
    277 packets to unknown port received.
    0 packet receive errors
    51852 packets sent
UdpLite:
TcpExt:
    2 invalid SYN cookies received
    6987 TCP sockets finished time wait in fast timer
    3 packets rejects in established connections because of timestamp
    15830 delayed acks sent
    4 delayed acks further delayed because of locked socket
    Quick ack mode was activated 805 times
    1812 packets directly queued to recvmsg prequeue.
    68319 bytes directly in process context from backlog
    2032949 bytes directly received in process context from prequeue
    753864 packet headers predicted
    1137 packets header predicted and directly queued to user
    72283 acknowledgments not containing data payload received
    61745 predicted acknowledgments
    3 times recovered from packet loss due to fast retransmit
    28 times recovered from packet loss by selective acknowledgements
    Detected reordering 1 times using FACK
    Detected reordering 3 times using SACK
    Detected reordering 10 times using time stamp
    13 congestion windows fully recovered without slow start
    8 congestion windows partially recovered using Hoe heuristic
    25 congestion windows recovered without slow start after partial ack
    TCPLostRetransmit: 53
    2 timeouts after SACK recovery
    3 timeouts in loss state
    260 fast retransmits
    22 forward retransmits
    69 retransmits in slow start
    139 other TCP timeouts
    TCPLossProbes: 103
    TCPLossProbeRecovery: 47
    1 classic Reno fast retransmits failed
    2 SACK retransmits failed
    590 DSACKs sent for old packets
    181 DSACKs received
    1 DSACKs for out of order packets received
    1524 connections reset due to unexpected data
    224 connections reset due to early user close
    6 connections aborted due to timeout
    TCPDSACKIgnoredNoUndo: 161
    TCPSackShifted: 278
    TCPSackMerged: 159
    TCPSackShiftFallback: 2102
    TCPDeferAcceptDrop: 39
    TCPRetransFail: 12
    TCPRcvCoalesce: 167783
    TCPOFOQueue: 23972
    TCPChallengeACK: 721
    TCPSYNChallenge: 719
    TCPAutoCorking: 9217
    TCPSynRetrans: 116
    TCPOrigDataSent: 172183
IpExt:
    InMcastPkts: 5235
    InBcastPkts: 29513
    InOctets: 1949555024
    OutOctets: 151265720
    InMcastOctets: 186628
    InBcastOctets: 4210815
    InNoECTPkts: 1733022
    InECT0Pkts: 913


** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor DRAM Controller [8086:0c04] (rev 06)
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor PCI Express x16 Controller [8086:0c01] (rev 06) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 00005000-00005fff
	Memory behind bridge: d1000000-d20fffff
	Prefetchable memory behind bridge: 0000000070000000-0000000081ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:14.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB xHCI [8086:8c31] (rev 04) (prog-if 30 [XHCI])
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 48
	Region 0: Memory at d2120000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd

00:16.0 Communication controller [0780]: Intel Corporation 8 Series/C220 Series Chipset Family MEI Controller #1 [8086:8c3a] (rev 04)
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 46
	Region 0: Memory at d2138000 (64-bit, non-prefetchable) [size=16]
	Capabilities: <access denied>
	Kernel driver in use: mei_me

00:16.3 Serial controller [0700]: Intel Corporation 8 Series/C220 Series Chipset Family KT Controller [8086:8c3d] (rev 04) (prog-if 02 [16550])
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 19
	Region 0: I/O ports at 6070 [size=8]
	Region 1: Memory at d213b000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: serial

00:19.0 Ethernet controller [0200]: Intel Corporation Ethernet Connection I217-LM [8086:153a] (rev 04)
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 51
	Region 0: Memory at d2100000 (32-bit, non-prefetchable) [size=128K]
	Region 1: Memory at d213a000 (32-bit, non-prefetchable) [size=4K]
	Region 2: I/O ports at 6040 [size=32]
	Capabilities: <access denied>
	Kernel driver in use: e1000e

00:1a.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #2 [8086:8c2d] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at d2136000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1b.0 Audio device [0403]: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller [8086:8c20] (rev 04)
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 50
	Region 0: Memory at d2130000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #1 [8086:8c10] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=02, subordinate=3a, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: b4000000-ca0fffff
	Prefetchable memory behind bridge: 0000000090000000-00000000b1ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.6 PCI bridge [0604]: Intel Corporation 8 Series/C220 Series Chipset Family PCI Express Root Port #7 [8086:8c1c] (rev d4) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=00, secondary=3b, subordinate=5f, sec-latency=0
	I/O behind bridge: 00003000-00004fff
	Memory behind bridge: cc000000-d01fffff
	Prefetchable memory behind bridge: 0000000060100000-00000000604fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 8 Series/C220 Series Chipset Family USB EHCI #1 [8086:8c26] (rev 04) (prog-if 20 [EHCI])
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 17
	Region 0: Memory at d2135000 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1f.0 ISA bridge [0601]: Intel Corporation QM87 Express LPC Controller [8086:8c4f] (rev 04)
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich

00:1f.2 SATA controller [0106]: Intel Corporation 8 Series/C220 Series Chipset Family 6-port SATA Controller 1 [AHCI mode] [8086:8c03] (rev 04) (prog-if 01 [AHCI 1.0])
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 49
	Region 0: I/O ports at 6068 [size=8]
	Region 1: I/O ports at 607c [size=4]
	Region 2: I/O ports at 6060 [size=8]
	Region 3: I/O ports at 6078 [size=4]
	Region 4: I/O ports at 6020 [size=32]
	Region 5: Memory at d2134000 (32-bit, non-prefetchable) [size=2K]
	Capabilities: <access denied>
	Kernel driver in use: ahci

00:1f.3 SMBus [0c05]: Intel Corporation 8 Series/C220 Series Chipset Family SMBus Controller [8086:8c22] (rev 04)
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at d2137000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at ef80 [size=32]
	Kernel driver in use: i801_smbus

01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK208GLM [Quadro K610M] [10de:12b9] (rev a1) (prog-if 00 [VGA controller])
	Subsystem: Hewlett-Packard Company Device [103c:2254]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 53
	Region 0: Memory at d1000000 (32-bit, non-prefetchable) [size=16M]
	Region 1: Memory at 70000000 (64-bit, prefetchable) [size=256M]
	Region 3: Memory at 80000000 (64-bit, prefetchable) [size=32M]
	Region 5: I/O ports at 5000 [size=128]
	Expansion ROM at d2080000 [disabled] [size=512K]
	Capabilities: <access denied>
	Kernel driver in use: nouveau

01:00.1 Audio device [0403]: NVIDIA Corporation Device [10de:0e0f] (rev a1)
	Subsystem: Hewlett-Packard Company Device [103c:2254]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin B routed to IRQ 17
	Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

3b:00.0 PCI bridge [0604]: Pericom Semiconductor Device [12d8:2404] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=3b, secondary=3c, subordinate=5f, sec-latency=0
	I/O behind bridge: 00003000-00004fff
	Memory behind bridge: cc000000-d01fffff
	Prefetchable memory behind bridge: 0000000060100000-00000000604fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

3c:01.0 PCI bridge [0604]: Pericom Semiconductor Device [12d8:2404] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=3c, secondary=3d, subordinate=3d, sec-latency=0
	Memory behind bridge: d0100000-d01fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

3c:02.0 PCI bridge [0604]: Pericom Semiconductor Device [12d8:2404] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=3c, secondary=3e, subordinate=5e, sec-latency=0
	I/O behind bridge: 00003000-00004fff
	Memory behind bridge: cc000000-cfffffff
	Prefetchable memory behind bridge: 0000000060100000-00000000602fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

3c:03.0 PCI bridge [0604]: Pericom Semiconductor Device [12d8:2404] (rev 05) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx+
	Latency: 0, Cache Line Size: 64 bytes
	Bus: primary=3c, secondary=5f, subordinate=5f, sec-latency=0
	Memory behind bridge: d0000000-d00fffff
	Prefetchable memory behind bridge: 0000000060300000-00000000604fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

3d:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 6b)
	Subsystem: Intel Corporation Dual Band Wireless-AC 7260 [8086:c070]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 52
	Region 0: Memory at d0100000 (64-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: iwlwifi

5f:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5249 PCI Express Card Reader [10ec:5249] (rev 01)
	Subsystem: Hewlett-Packard Company Device [103c:2253]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 64 bytes
	Interrupt: pin A routed to IRQ 47
	Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: rtsx_pci


** USB devices:
Bus 002 Device 002: ID 8087:8000 Intel Corp. 
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp. 
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 004: ID 05c8:0374 Cheng Uei Precision Industry Co., Ltd (Foxlink) 
Bus 003 Device 003: ID 138a:003f Validity Sensors, Inc. 
Bus 003 Device 007: ID 093a:2510 Pixart Imaging, Inc. Optical Mouse
Bus 003 Device 005: ID 8087:07dc Intel Corp. 
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


-- System Information:
Debian Release: stretch/sid
  APT prefers stable-updates
  APT policy: (500, 'stable-updates'), (500, 'unstable'), (500, 'testing'), (500, 'stable'), (1, 'experimental')
Architecture: amd64 (x86_64)

Kernel: Linux 3.16.0-4-amd64 (SMP w/8 CPU cores)
Locale: LANG=POSIX, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)

Versions of packages linux-image-3.16.0-4-amd64 depends on:
ii  debconf [debconf-2.0]                   1.5.57
ii  initramfs-tools [linux-initramfs-tool]  0.120
ii  kmod                                    20-1
ii  linux-base                              3.5

Versions of packages linux-image-3.16.0-4-amd64 recommends:
ii  firmware-linux-free  3.3
ii  irqbalance           1.0.6-3

Versions of packages linux-image-3.16.0-4-amd64 suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-26
pn  linux-doc-3.16          <none>

Versions of packages linux-image-3.16.0-4-amd64 is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
ii  firmware-iwlwifi        0.44
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
pn  firmware-linux-nonfree  <none>
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.16.0-4-amd64/postinst/depmod-error-initrd-3.16.0-4-amd64: false
  linux-image-3.16.0-4-amd64/prerm/removing-running-kernel-3.16.0-4-amd64: true
  linux-image-3.16.0-4-amd64/postinst/mips-initrd-3.16.0-4-amd64:


Reply to: