Bug#792678: Booting hangs with "uncleared pch fifo underrun on pch transcoder"
Package: src:linux
Version: 4.0.8-1
Severity: normal
Dear maintainer,
boot process with the kernel 4.0.0 hangs with the following message:
[drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch
fifo underrun on pch transcoder A
[drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
But if the sysvinit option is chosen, the boot is continuing.
Thanks
-- Package-specific info:
** Version:
Linux version 4.0.0-2-amd64 (debian-kernel@lists.debian.org) (gcc version 4.9.3 (Debian 4.9.3-1) ) #1 SMP Debian 4.0.8-1 (2015-07-11)
** Command line:
BOOT_IMAGE=/boot/vmlinuz-4.0.0-2-amd64 root=UUID=f4375c0d-830d-4fe6-b946-89de12bb3f31 ro quiet init=/lib/sysvinit/init
** Tainted: O (4096)
* Out-of-tree module has been loaded.
** Kernel log:
[ 3.157962] Bluetooth: SCO socket layer initialized
[ 3.158791] ACPI Warning: SystemIO range 0x000000000000EFA0-0x000000000000EFBF conflicts with OpRegion 0x000000000000EFA0-0x000000000000EFAF (\_SB_.PCI0.SBUS.SMBI) (20150204/utaddress-254)
[ 3.158792] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 3.163160] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 3.165134] usbcore: registered new interface driver btusb
[ 3.181535] input: PC Speaker as /devices/platform/pcspkr/input/input19
[ 3.222101] alg: No test for crc32 (crc32-pclmul)
[ 3.262914] r8169 0000:09:00.0: firmware: direct-loading firmware rtl_nic/rtl8168e-3.fw
[ 3.383271] r8169 0000:09:00.0 eth0: link down
[ 3.383304] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 3.387542] random: nonblocking pool is initialized
[ 3.396003] intel_rapl: Found RAPL domain package
[ 3.396005] intel_rapl: Found RAPL domain core
[ 3.396006] intel_rapl: Found RAPL domain uncore
[ 3.416252] [drm:intel_set_pch_fifo_underrun_reporting [i915]] *ERROR* uncleared pch fifo underrun on pch transcoder A
[ 3.416277] [drm:cpt_irq_handler [i915]] *ERROR* PCH transcoder A FIFO underrun
[ 3.515197] ACPI: Battery Slot [BAT1] (battery present)
[ 3.515609] wmi: Mapper loaded
[ 3.625556] iTCO_vendor_support: vendor-support=0
[ 3.626618] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 3.626659] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 3.627101] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 3.685638] Console: switching to colour frame buffer device 170x48
[ 3.689529] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 3.689531] i915 0000:00:02.0: registered panic notifier
[ 3.695166] cfg80211: World regulatory domain updated:
[ 3.695170] cfg80211: DFS Master region: unset
[ 3.695171] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 3.695174] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.695176] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.695177] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.695180] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 3.695182] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 3.695184] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 3.695185] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 3.695187] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 3.893766] psmouse serio4: synaptics: queried max coordinates: x [..5768], y [..5236]
[ 3.934284] psmouse serio4: synaptics: queried min coordinates: x [1172..], y [616..]
[ 3.999382] psmouse serio4: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd002a3/0x940300/0x126c00, board id: 2290, fw id: 1212745
[ 3.999396] psmouse serio4: synaptics: serio: Synaptics pass-through port at isa0060/serio4/input0
[ 4.048113] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input22
[ 4.189760] Adding 980988k swap on /dev/sdb3. Priority:-1 extents:1 across:980988k SSFS
[ 4.208370] EXT4-fs (sdb1): re-mounted. Opts: (null)
[ 4.249485] EXT4-fs (sdb1): re-mounted. Opts: errors=remount-ro
[ 5.443521] lp: driver loaded but no devices found
[ 5.456977] ppdev: user-space parallel port driver
[ 5.478773] loop: module loaded
[ 5.502497] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[ 5.562156] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 6.161889] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input24
[ 6.239551] vboxdrv: Found 2 processor cores.
[ 6.241051] vboxdrv: fAsync=0 offMin=0x19e offMax=0x319a
[ 6.241138] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 6.241140] vboxdrv: Successfully loaded version 4.3.28_Debian (interface 0x001a000a).
[ 6.277913] vboxpci: IOMMU not found (not registered)
[ 7.049399] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 7.057096] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 7.303164] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 7.312460] iwlwifi 0000:03:00.0: Radio type=0x2-0x0-0x0
[ 7.332780] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 7.332784] Bluetooth: BNEP filters: protocol multicast
[ 7.332789] Bluetooth: BNEP socket layer initialized
[ 7.978593] wlan0: authenticate with c8:3a:35:07:65:60
[ 7.981133] wlan0: send auth to c8:3a:35:07:65:60 (try 1/3)
[ 8.028433] wlan0: authenticated
[ 8.031490] wlan0: associate with c8:3a:35:07:65:60 (try 1/3)
[ 8.034259] wlan0: RX AssocResp from c8:3a:35:07:65:60 (capab=0x411 status=0 aid=2)
[ 8.036680] wlan0: associated
[ 8.036742] cfg80211: Calling CRDA for country: CN
[ 8.041541] cfg80211: Regulatory domain changed to country: CN
[ 8.041545] cfg80211: DFS Master region: FCC
[ 8.041546] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 8.041549] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 8.041551] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (N/A)
[ 8.041553] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2300 mBm), (0 s)
[ 8.041555] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 3000 mBm), (N/A)
[ 8.041557] cfg80211: (57240000 KHz - 59400000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 8.041559] cfg80211: (59400000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 4400 mBm), (N/A)
[ 8.041560] cfg80211: (63720000 KHz - 65880000 KHz @ 2160000 KHz), (N/A, 2800 mBm), (N/A)
[ 8.216458] tun: Universal TUN/TAP device driver, 1.6
[ 8.216461] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 8.501942] systemd-logind[2853]: New seat seat0.
[ 8.503241] systemd-logind[2853]: Watching system buttons on /dev/input/event6 (Power Button)
[ 8.503363] systemd-logind[2853]: Watching system buttons on /dev/input/event9 (Video Bus)
[ 8.503482] systemd-logind[2853]: Watching system buttons on /dev/input/event5 (Power Button)
[ 8.503588] systemd-logind[2853]: Watching system buttons on /dev/input/event4 (Lid Switch)
[ 8.503710] systemd-logind[2853]: Watching system buttons on /dev/input/event7 (ThinkPad Extra Buttons)
[ 8.509500] systemd-logind[2853]: Failed to start user service: Unknown unit: user@113.service
[ 8.513798] systemd-logind[2853]: New session c1 of user Debian-gdm.
[ 8.667464] psmouse serio5: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[ 8.893804] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input23
[ 20.138628] fuse init (API version 7.23)
[ 39.630610] systemd-logind[2853]: Removed session c1.
[ 308.104764] systemd-logind[2853]: Failed to start user service: Unknown unit: user@33.service
[ 308.110010] systemd-logind[2853]: New session c2 of user www-data.
[ 308.147802] systemd-logind[2853]: Removed session c2.
[ 308.156511] systemd-logind[2853]: New session c3 of user www-data.
[ 377.483286] device-mapper: uevent: version 1.0.3
[ 377.483416] device-mapper: ioctl: 4.30.0-ioctl (2014-12-22) initialised: dm-devel@redhat.com
[ 377.571836] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
** Model information
sys_vendor: LENOVO
product_name: 3358BBG
product_version: ThinkPad Edge E130
chassis_vendor: LENOVO
chassis_version: Not Available
bios_vendor: LENOVO
bios_version: H4ET92WW (2.52 )
board_vendor: LENOVO
board_name: 3358BBG
board_version: Not Defined
** Loaded modules:
xts
gf128mul
dm_crypt
dm_mod
fuse
ctr
ccm
tun
cpufreq_conservative
cpufreq_userspace
cpufreq_powersave
cpufreq_stats
bnep
snd_hrtimer
snd_seq
snd_seq_device
pci_stub
vboxpci(O)
vboxnetadp(O)
vboxnetflt(O)
vboxdrv(O)
binfmt_misc
uinput
loop
parport_pc
ppdev
lp
parport
iTCO_wdt
iTCO_vendor_support
x86_pkg_temp_thermal
intel_powerclamp
intel_rapl
iosf_mbi
coretemp
kvm_intel
kvm
crct10dif_pclmul
crc32_pclmul
ghash_clmulni_intel
cryptd
pcspkr
psmouse
serio_raw
btusb
arc4
i2c_i801
bluetooth
sg
snd_hda_codec_hdmi
snd_hda_codec_realtek
snd_hda_codec_generic
iwldvm
mac80211
joydev
evdev
lpc_ich
rtsx_pci_ms
iwlwifi
uvcvideo
videobuf2_vmalloc
videobuf2_memops
memstick
cfg80211
videobuf2_core
v4l2_common
snd_hda_intel
videodev
snd_hda_controller
media
snd_hda_codec
snd_hwdep
snd_pcm
snd_timer
shpchp
i915
thinkpad_acpi
drm_kms_helper
nvram
snd
wmi
soundcore
drm
battery
tpm_tis
rfkill
tpm
mei_me
ac
i2c_algo_bit
mei
video
button
processor
ext4
crc16
mbcache
jbd2
hid_generic
usbhid
hid
sd_mod
rtsx_pci_sdmmc
mmc_core
crc32c_intel
ahci
libahci
libata
scsi_mod
r8169
mii
rtsx_pci
mfd_core
ehci_pci
ehci_hcd
xhci_pci
xhci_hcd
usbcore
thermal
usb_common
thermal_sys
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation 3rd Gen Core processor DRAM Controller [8086:0154] (rev 09)
Subsystem: Lenovo Device [17aa:5008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: ivb_uncore
00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller])
Subsystem: Lenovo Device [17aa:5008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 29
Region 0: Memory at f0000000 (64-bit, non-prefetchable) [size=4M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at 5000 [size=64]
Expansion ROM at <unassigned> [disabled]
Capabilities: <access denied>
Kernel driver in use: i915
00:14.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller [8086:1e31] (rev 04) (prog-if 30 [XHCI])
Subsystem: Lenovo Device [17aa:5008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 24
Region 0: Memory at f1700000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: xhci_hcd
00:16.0 Communication controller [0780]: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 [8086:1e3a] (rev 04)
Subsystem: Lenovo Device [17aa:5008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 28
Region 0: Memory at f1715000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
00:1a.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 [8086:1e2d] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:5008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at f171a000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1b.0 Audio device [0403]: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller [8086:1e20] (rev 04)
Subsystem: Lenovo Device [17aa:5008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 31
Region 0: Memory at f1710000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
00:1c.0 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 [8086:1e10] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.1 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 [8086:1e12] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
Memory behind bridge: f1600000-f16fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.2 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 [8086:1e14] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=08, sec-latency=0
I/O behind bridge: 00004000-00004fff
Memory behind bridge: f0e00000-f15fffff
Prefetchable memory behind bridge: 00000000f0400000-00000000f0bfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1c.5 PCI bridge [0604]: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 6 [8086:1e1a] (rev c4) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f0d00000-f0dfffff
Prefetchable memory behind bridge: 00000000f0c00000-00000000f0cfffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: <access denied>
Kernel driver in use: pcieport
00:1d.0 USB controller [0c03]: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 [8086:1e26] (rev 04) (prog-if 20 [EHCI])
Subsystem: Lenovo Device [17aa:5008]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 23
Region 0: Memory at f1719000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
00:1f.0 ISA bridge [0601]: Intel Corporation HM77 Express Chipset LPC Controller [8086:1e57] (rev 04)
Subsystem: Lenovo Device [17aa:5008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
00:1f.2 SATA controller [0106]: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] [8086:1e03] (rev 04) (prog-if 01 [AHCI 1.0])
Subsystem: Lenovo Device [17aa:5008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 27
Region 0: I/O ports at 5088 [size=8]
Region 1: I/O ports at 5094 [size=4]
Region 2: I/O ports at 5080 [size=8]
Region 3: I/O ports at 5090 [size=4]
Region 4: I/O ports at 5060 [size=32]
Region 5: Memory at f1718000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus [0c05]: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller [8086:1e22] (rev 04)
Subsystem: Lenovo Device [17aa:5008]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Interrupt: pin C routed to IRQ 18
Region 0: Memory at f1714000 (64-bit, non-prefetchable) [size=256]
Region 4: I/O ports at efa0 [size=32]
03:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 2230 [8086:0888] (rev c4)
Subsystem: Intel Corporation Centrino Wireless-N 2230 BGN [8086:4262]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 30
Region 0: Memory at f1600000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
04:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader [10ec:5209] (rev 01)
Subsystem: Lenovo Device [17aa:5008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 25
Region 0: Memory at f0e00000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: rtsx_pci
09:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 07)
Subsystem: Lenovo Device [17aa:5008]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 26
Region 0: I/O ports at 3000 [size=256]
Region 2: Memory at f0c04000 (64-bit, prefetchable) [size=4K]
Region 4: Memory at f0c00000 (64-bit, prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: r8169
** USB devices:
Bus 004 Device 003: ID 8087:07da Intel Corp.
Bus 004 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 003: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth
Bus 003 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 5986:0299 Acer, Inc
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
-- System Information:
Debian Release: stretch/sid
APT prefers testing
APT policy: (900, 'testing'), (800, 'stable'), (700, 'unstable')
Architecture: amd64 (x86_64)
Foreign Architectures: i386
Kernel: Linux 4.0.0-2-amd64 (SMP w/2 CPU cores)
Locale: LANG=en_US.UTF-8, LC_CTYPE=en_US.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: unable to detect
Versions of packages linux-image-4.0.0-2-amd64 depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.120
ii kmod 20-1
ii linux-base 3.5
Versions of packages linux-image-4.0.0-2-amd64 recommends:
ii firmware-linux-free 3.3
ii irqbalance 1.0.6-3
Versions of packages linux-image-4.0.0-2-amd64 suggests:
pn debian-kernel-handbook <none>
ii grub-pc 2.02~beta2-26
pn linux-doc-4.0 <none>
Versions of packages linux-image-4.0.0-2-amd64 is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
ii firmware-iwlwifi 0.44
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
ii firmware-realtek 0.44
pn xen-hypervisor <none>
-- debconf-show failed
Reply to: