Bug#781442: linux-image-3.16.0-4-kirkwood: Logitech C525: registered new interface driver snd-usb-audio -> watchdog ...: watchdog did not stop!
Package: src:linux
Version: 3.16.7-ckt7-1
Severity: normal
Dear Maintainer,
whenn booting Seagate Dockstar with Logitech C525 Webcam plugged in,
using linux-image-3.16.0-4-kirkwood (not occuring with kernels
from squeeze and wheezy),
the linux netconsole is reporting (I did not receive more lines then those but those from uboot):
[ 28.538595] usbcore: registered new interface driver snd-usb-audio
[ 51.319047] watchdog watchdog0: watchdog did not stop!
[ 51.362170] systemd-shutdown[1]: Sending SIGTERM to remaining processes...
[ 51.382377] systemd-journald[133]: Received SIGTERM from PID 1 (systemd-shutdow).
[ 51.397286] systemd-shutdown[1]: Sending SIGKILL to remaining processes...
[ 51.413946] systemd-shutdown[1]: Hardware watchdog 'Orion Watchdog', version 0
-- Package-specific info:
** Version:
Linux version 3.16.0-4-kirkwood (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 Debian 3.16.7-ckt7-1 (2015-03-01)
** Command line:
console=ttyS0,115200 root=/dev/sda1 rootdelay=10 rootfstype=ext4 mtdparts=orion_nand:1M(u-boot),4M(uImage),32M(rootfs),-(data) netconsole=6666@10.0.0.103/eth0,6666@10.0.0.22/
** Not tainted
** Kernel log:
[ 4.790424] hub 1-1:1.0: USB hub found
[ 4.794587] hub 1-1:1.0: 4 ports detected
[ 5.070582] usb 1-1.3: new high-speed USB device number 3 using orion-ehci
[ 5.692083] usb 1-1.3: New USB device found, idVendor=13fe, idProduct=4200
[ 5.699008] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 5.706371] usb 1-1.3: Product: USB DISK 2.0
[ 5.710675] usb 1-1.3: Manufacturer:
[ 5.715061] usb 1-1.3: SerialNumber: 07104CB46B15CF55
[ 5.736586] SCSI subsystem initialized
[ 5.745203] usb-storage 1-1.3:1.0: USB Mass Storage device detected
[ 5.751868] scsi0 : usb-storage 1-1.3:1.0
[ 5.757554] usbcore: registered new interface driver usb-storage
[ 6.756554] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 6
[ 6.779504] sd 0:0:0:0: [sda] 15654912 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 6.788731] sd 0:0:0:0: [sda] Write Protect is off
[ 6.793570] sd 0:0:0:0: [sda] Mode Sense: 23 00 00 00
[ 6.795230] sd 0:0:0:0: [sda] No Caching mode page found
[ 6.800586] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 6.815852] sda: sda1
[ 6.824235] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 6.833990] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 14.342856] NILFS version 2 loaded
[ 14.382436] netpoll: netconsole: local port 6666
[ 14.387103] netpoll: netconsole: local IPv4 address 10.0.0.103
[ 14.392967] netpoll: netconsole: interface 'eth0'
[ 14.397701] netpoll: netconsole: remote port 6666
[ 14.402438] netpoll: netconsole: remote IPv4 address 10.0.0.22
[ 14.408309] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[ 14.415224] netpoll: netconsole: device eth0 not up yet, forcing it
[ 17.759761] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
[ 17.773380] console [netcon0] enabled
[ 17.777098] netconsole: network logging started
[ 18.044007] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[ 18.562416] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 18.576187] systemd[1]: Detected architecture 'arm'.
[ 18.690379] systemd[1]: Inserted module 'autofs4'
[ 18.754250] NET: Registered protocol family 10
[ 18.759947] systemd[1]: Inserted module 'ipv6'
[ 18.766142] systemd[1]: Set hostname to <dockstar3>.
[ 19.204347] systemd[1]: Cannot add dependency job for unit dbus.socket, ignoring: Unit dbus.socket failed to load: No such file or directory.
[ 19.217323] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 19.234933] systemd[1]: Expecting device dev-ttyS0.device...
[ 19.250396] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 19.258574] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 19.266360] systemd[1]: Starting Remote File Systems (Pre).
[ 19.282354] systemd[1]: Reached target Remote File Systems (Pre).
[ 19.288679] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 19.297025] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 19.305132] systemd[1]: Starting Paths.
[ 19.318348] systemd[1]: Reached target Paths.
[ 19.322956] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 19.336473] random: nonblocking pool is initialized
[ 19.350386] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 19.360001] systemd[1]: Starting Encrypted Volumes.
[ 19.374344] systemd[1]: Reached target Encrypted Volumes.
[ 19.379928] systemd[1]: Starting Root Slice.
[ 19.414367] systemd[1]: Created slice Root Slice.
[ 19.419283] systemd[1]: Starting User and Session Slice.
[ 19.434356] systemd[1]: Created slice User and Session Slice.
[ 19.440296] systemd[1]: Starting Delayed Shutdown Socket.
[ 19.454353] systemd[1]: Listening on Delayed Shutdown Socket.
[ 19.460284] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 19.478355] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 19.485522] systemd[1]: Starting Journal Socket (/dev/log).
[ 19.502345] systemd[1]: Listening on Journal Socket (/dev/log).
[ 19.508484] systemd[1]: Starting udev Kernel Socket.
[ 19.522346] systemd[1]: Listening on udev Kernel Socket.
[ 19.527859] systemd[1]: Starting udev Control Socket.
[ 19.542347] systemd[1]: Listening on udev Control Socket.
[ 19.547946] systemd[1]: Starting Journal Socket.
[ 19.562348] systemd[1]: Listening on Journal Socket.
[ 19.567545] systemd[1]: Starting Sockets.
[ 19.582342] systemd[1]: Reached target Sockets.
[ 19.587069] systemd[1]: Starting System Slice.
[ 19.602356] systemd[1]: Created slice System Slice.
[ 19.607471] systemd[1]: Starting File System Check on Root Device...
[ 19.625093] systemd[1]: Starting system-getty.slice.
[ 19.646492] systemd[1]: Created slice system-getty.slice.
[ 19.652192] systemd[1]: Starting system-serial\x2dgetty.slice.
[ 19.670396] systemd[1]: Created slice system-serial\x2dgetty.slice.
[ 19.681457] systemd[1]: Starting Load Kernel Modules...
[ 19.692003] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 19.709010] systemd[1]: Mounting POSIX Message Queue File System...
[ 19.731938] systemd[1]: Mounting Debug File System...
[ 19.747182] systemd[1]: Starting udev Coldplug all Devices...
[ 19.776061] systemd[1]: Mounted Huge Pages File System.
[ 19.786053] systemd[1]: Started Set Up Additional Binary Formats.
[ 19.792569] systemd[1]: Starting Journal Service...
[ 19.814548] systemd[1]: Started Journal Service.
[ 20.363074] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 20.574543] systemd-udevd[153]: starting version 215
[ 21.115619] systemd-journald[133]: Received request to flush runtime journal from PID 1
[ 21.278603] orion_wdt: Initial timeout 21 sec
[ 21.495113] alg: hash: Test 3 failed for mv-sha1
[ 21.499848] 00000000: 10 bf d7 00 71 0b bb 83 3a 26 d0 97 13 05 99 f5
[ 21.506366] 00000010: 3a 92 53 3c
[ 21.726645] alg: hash: Test 1 failed for mv-hmac-sha1
[ 21.731812] 00000000: 0c aa 9f d5 37 c3 79 3a 91 d9 21 5f 42 2b 2c 24
[ 21.738335] 00000010: b7 c3 16 0c
[ 22.167716] Adding 409596k swap on /Swapfile. Priority:-1 extents:4 across:434172k FS
** Model information
Hardware : Marvell Kirkwood (Flattened Device Tree)
Revision : 0000
** Loaded modules:
hmac
sha1_generic
sha1_arm
orion_wdt
mv_cesa
ipv6
autofs4
ext4
mbcache
jbd2
netconsole
configfs
inet_lro
nilfs2
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
usb_storage
scsi_mod
ehci_orion
ehci_hcd
marvell
mv643xx_eth
mvmdio
of_mdio
libphy
usbcore
usb_common
** PCI devices:
not available
** USB devices:
not available
-- System Information:
Debian Release: 8.0
APT prefers testing
APT policy: (500, 'testing')
Architecture: armel (armv5tel)
Kernel: Linux 3.16.0-4-kirkwood
Locale: LANG=de_DE.UTF-8, LC_CTYPE=de_DE.UTF-8 (charmap=locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
ANSI_X3.4-1968)
Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages linux-image-3.16.0-4-kirkwood depends on:
ii debconf [debconf-2.0] 1.5.56
ii initramfs-tools [linux-initramfs-tool] 0.119
ii kmod 18-3
ii linux-base 3.5
ii module-init-tools 18-3
Versions of packages linux-image-3.16.0-4-kirkwood recommends:
pn firmware-linux-free <none>
ii uboot-mkimage 2012.04.01-2
Versions of packages linux-image-3.16.0-4-kirkwood suggests:
pn debian-kernel-handbook <none>
pn fdutils <none>
pn linux-doc-3.16 <none>
Versions of packages linux-image-3.16.0-4-kirkwood is related to:
pn firmware-atheros <none>
pn firmware-bnx2 <none>
pn firmware-bnx2x <none>
pn firmware-brcm80211 <none>
pn firmware-intelwimax <none>
pn firmware-ipw2x00 <none>
pn firmware-ivtv <none>
pn firmware-iwlwifi <none>
pn firmware-libertas <none>
pn firmware-linux <none>
pn firmware-linux-nonfree <none>
pn firmware-myricom <none>
pn firmware-netxen <none>
pn firmware-qlogic <none>
pn firmware-ralink <none>
pn firmware-realtek <none>
pn xen-hypervisor <none>
-- debconf information:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = "de_DE.UTF-8"
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
locale: Cannot set LC_CTYPE to default locale: No such file or directory
locale: Cannot set LC_MESSAGES to default locale: No such file or directory
locale: Cannot set LC_ALL to default locale: No such file or directory
linux-image-3.16.0-4-kirkwood/postinst/mips-initrd-3.16.0-4-kirkwood:
linux-image-3.16.0-4-kirkwood/postinst/depmod-error-initrd-3.16.0-4-kirkwood: false
linux-image-3.16.0-4-kirkwood/prerm/removing-running-kernel-3.16.0-4-kirkwood: true
Reply to: