[Date Prev][Date Next] [Thread Prev][Thread Next] [Date Index] [Thread Index]

Bug#780551: EIP: [<c147a640>] _raw_spin_unlock_irqrestore+0x0/0x20 SS:ESP 0068:c15e9f48



Package: src:linux
Version: 3.16.7-ckt4-3
Severity: important

Dear Maintainer,

here is a kernel oops (from an eeepc 701).
None of the OCR packages from the Debian repository allowed me converting
the picture to text (ocropus, gocr, tesseract-ocr, cuneiform) [ocrad not tested]

Here here the kernel trace: http://i.imgur.com/nLjf62S.jpg
Please let me know of anything I could do in order to get it fixed.


-- Package-specific info:
** Version:
Linux version 3.16.0-4-686-pae (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt4-3 (2015-02-03)

** Command line:
BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-686-pae root=UUID=93e31f4c-bbbb-4d55-aa08-b112cb2b93e2 ro forcefsck

** Not tainted

** Kernel log:
[   43.552663] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
[  132.029632] NET: Registered protocol family 38
[  160.732210] usb 3-2: new full-speed USB device number 2 using uhci_hcd
[  160.923232] usb 3-2: New USB device found, idVendor=054c, idProduct=0830
[  160.923247] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  160.923256] usb 3-2: Product: USB Bus-powered Device
[  160.923265] usb 3-2: Manufacturer: Sony
[  160.923273] usb 3-2: SerialNumber: C685E02C30D1
[  161.002760] hidraw: raw HID events driver (C) Jiri Kosina
[  161.023934] usbcore: registered new interface driver usbhid
[  161.023947] usbhid: USB HID core driver
[  161.032741] input: Sony USB Bus-powered Device as /devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/0003:054C:0830.0001/input/input13
[  161.033399] hid-generic 0003:054C:0830.0001: input,hidraw0: USB HID v1.11 Device [Sony USB Bus-powered Device] on usb-0000:00:1d.1-2/input0
[  169.261506] loop: module loaded
[  169.995877] lp: driver loaded but no devices found
[  170.029862] ppdev: user-space parallel port driver
[  170.104814] fuse init (API version 7.23)
[  177.650943] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  178.554493] device eth0 entered promiscuous mode
[  180.563133] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input14
[  181.991001] wlan0: authenticate with f8:7f:23:xx:xx:xx
[  182.003299] wlan0: send auth to f8:7f:23:xx:xx:xx (try 1/3)
[  182.008696] wlan0: authenticated
[  182.014266] ath5k 0000:01:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use
[  182.020115] wlan0: associate with f8:7f:23:xx:xx:xx (try 1/3)
[  182.035000] wlan0: RX AssocResp from f8:7f:23:xx:xx:xx (capab=0x411 status=0 aid=2)
[  182.039506] wlan0: associated
[  182.043783] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  183.594284] device eth0 left promiscuous mode
[  183.754275] netpoll: netconsole: local port 6665
[  183.758736] netpoll: netconsole: local IPv4 address 0.0.0.0
[  183.763002] netpoll: netconsole: interface 'eth0'
[  183.767077] netpoll: netconsole: remote port 6666
[  183.771194] netpoll: netconsole: remote IPv4 address 192.168.8.4
[  183.775310] netpoll: netconsole: remote ethernet address ff:ff:ff:ff:ff:ff
[  183.789522] netpoll: netconsole: no IP address for eth0, aborting
[  183.793644] netconsole: cleaning up
[  186.037153] [drm:i915_gem_open] 
[  186.190021] [drm:i915_gem_open] 
[  186.208340] [drm:i915_gem_open] 
[  186.208580] [drm:i915_gem_open] 
[  534.035148] [drm:i915_gem_open] 
[  540.767684] [drm:i915_gem_open] 
[  909.834658] perf interrupt took too long (2522 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
[ 1999.860536] [drm:i915_gem_open] 

** Model information
eeepc 701

** Loaded modules:
nls_utf8
nls_cp437
vfat
fat
bluetooth
6lowpan_iphc
configfs
uinput
fuse
parport_pc
ppdev
lp
parport
sha256_generic
loop
hid_generic
usbhid
hid
ecb
cbc
algif_skcipher
af_alg
dm_crypt
dm_mod
joydev
iTCO_wdt
iTCO_vendor_support
arc4
evdev
psmouse
serio_raw
uvcvideo
i915
videobuf2_vmalloc
videobuf2_memops
videobuf2_core
v4l2_common
videodev
media
lpc_ich
mfd_core
rng_core
ath5k
ath
mac80211
snd_hda_codec_realtek
snd_hda_codec_generic
cfg80211
snd_hda_intel
snd_hda_controller
drm_kms_helper
snd_hda_codec
drm
snd_hwdep
snd_pcm_oss
snd_mixer_oss
i2c_algo_bit
snd_pcm
i2c_core
ac
battery
snd_timer
snd
soundcore
processor
button
video
eeepc_laptop
sparse_keymap
rfkill
shpchp
ext4
crc16
mbcache
jbd2
usb_storage
sg
sd_mod
crc_t10dif
crct10dif_generic
crct10dif_common
ata_generic
ata_piix
ahci
libahci
libata
uhci_hcd
ehci_pci
ehci_hcd
scsi_mod
usbcore
usb_common
atl2
thermal
thermal_sys

** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 915GM/PM/GMS/910GML Express Processor to DRAM Controller [8086:2590] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: agpgart-intel

00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2592] (rev 04) (prog-if 00 [VGA controller])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at f7f00000 (32-bit, non-prefetchable) [size=512K]
	Region 1: I/O ports at ec00 [size=8]
	Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M]
	Region 3: Memory at f7ec0000 (32-bit, non-prefetchable) [size=256K]
	Expansion ROM at <unassigned> [disabled]
	Capabilities: <access denied>
	Kernel driver in use: i915

00:02.1 Display controller [0380]: Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller [8086:2792] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d9]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Region 0: Memory at f7f80000 (32-bit, non-prefetchable) [size=512K]
	Capabilities: <access denied>

00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82a1]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 44
	Region 0: Memory at f7eb8000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel

00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 00001000-00001fff
	Memory behind bridge: 80000000-801fffff
	Prefetchable memory behind bridge: 0000000080200000-00000000803fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.1 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 2 [8086:2662] (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 00002000-00002fff
	Memory behind bridge: fbf00000-fbffffff
	Prefetchable memory behind bridge: 0000000080400000-00000000805fffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1c.2 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 3 [8086:2664] (rev 04) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Bus: primary=00, secondary=01, subordinate=02, sec-latency=0
	I/O behind bridge: 00003000-00003fff
	Memory behind bridge: f8000000-fbefffff
	Prefetchable memory behind bridge: 00000000f0000000-00000000f6ffffff
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport

00:1d.0 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 4: I/O ports at e400 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.1 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 4: I/O ports at e480 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.2 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 4: I/O ports at e800 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.3 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 04) (prog-if 00 [UHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin D routed to IRQ 16
	Region 4: I/O ports at e880 [size=32]
	Kernel driver in use: uhci_hcd

00:1d.7 USB controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 04) (prog-if 20 [EHCI])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 23
	Region 0: Memory at f7eb7c00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: <access denied>
	Kernel driver in use: ehci-pci

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev d4) (prog-if 01 [Subtractive decode])
	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Bus: primary=00, secondary=05, subordinate=05, sec-latency=32
	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>

00:1f.0 ISA bridge [0601]: Intel Corporation 82801FBM (ICH6M) LPC Interface Bridge [8086:2641] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Kernel driver in use: lpc_ich

00:1f.2 IDE interface [0101]: Intel Corporation 82801FBM (ICH6M) SATA Controller [8086:2653] (rev 04) (prog-if 80 [Master])
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin B routed to IRQ 19
	Region 0: I/O ports at 01f0 [size=8]
	Region 1: I/O ports at 03f4
	Region 2: I/O ports at 0170 [size=8]
	Region 3: I/O ports at 0374
	Region 4: I/O ports at ffa0 [size=16]
	Capabilities: <access denied>
	Kernel driver in use: ata_piix

00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 04)
	Subsystem: ASUSTeK Computer Inc. Device [1043:82d8]
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin B routed to IRQ 0
	Region 4: I/O ports at 0400 [size=32]

01:00.0 Ethernet controller [0200]: Qualcomm Atheros AR242x / AR542x Wireless Network Adapter (PCI-Express) [168c:001c] (rev 01)
	Subsystem: AzureWave AW-GE780 802.11bg Wireless Mini PCIe Card [1a3b:1026]
	Physical Slot: eeepc-wifi
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 18
	Region 0: Memory at fbef0000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: ath5k

03:00.0 Ethernet controller [0200]: Qualcomm Atheros Attansic L2 Fast Ethernet [1969:2048] (rev a0)
	Subsystem: ASUSTeK Computer Inc. Device [1043:8233]
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 16 bytes
	Interrupt: pin A routed to IRQ 43
	Region 0: Memory at fbfc0000 (64-bit, non-prefetchable) [size=256K]
	Expansion ROM at fbfa0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: atl2


** USB devices:
Bus 001 Device 003: ID eb1a:2761 eMPIA Technology, Inc. EeePC 701 integrated Webcam
Bus 001 Device 002: ID 0951:1606 Kingston Technology Eee PC 701 SD Card Reader [ENE UB6225]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


-- System Information:
Debian Release: 8.0
  APT prefers testing
  APT policy: (990, 'testing'), (500, 'stable'), (90, 'unstable'), (1, 'experimental')
Architecture: i386 (i686)

Kernel: Linux 3.16.0-4-686-pae (SMP w/1 CPU core)
Locale: LANG=fr_FR.UTF-8, LC_CTYPE=fr_FR.UTF-8 (charmap=UTF-8)
Shell: /bin/sh linked to /bin/dash
Init: sysvinit (via /sbin/init)

Versions of packages linux-image-3.16.0-4-686-pae depends on:
ii  debconf [debconf-2.0]                   1.5.55
ii  initramfs-tools [linux-initramfs-tool]  0.116
ii  kmod                                    18-3
ii  linux-base                              3.5
ii  module-init-tools                       18-3

Versions of packages linux-image-3.16.0-4-686-pae recommends:
ii  firmware-linux-free  3.3
pn  irqbalance           <none>
ii  libc6-i686           2.19-15

Versions of packages linux-image-3.16.0-4-686-pae suggests:
pn  debian-kernel-handbook  <none>
ii  grub-pc                 2.02~beta2-20
pn  linux-doc-3.16          <none>

Versions of packages linux-image-3.16.0-4-686-pae is related to:
pn  firmware-atheros        <none>
pn  firmware-bnx2           <none>
pn  firmware-bnx2x          <none>
pn  firmware-brcm80211      <none>
pn  firmware-intelwimax     <none>
pn  firmware-ipw2x00        <none>
pn  firmware-ivtv           <none>
pn  firmware-iwlwifi        <none>
pn  firmware-libertas       <none>
pn  firmware-linux          <none>
ii  firmware-linux-nonfree  0.43
pn  firmware-myricom        <none>
pn  firmware-netxen         <none>
pn  firmware-qlogic         <none>
pn  firmware-ralink         <none>
pn  firmware-realtek        <none>
pn  xen-hypervisor          <none>

-- debconf information:
  linux-image-3.16.0-4-686-pae/postinst/mips-initrd-3.16.0-4-686-pae:
  linux-image-3.16.0-4-686-pae/postinst/depmod-error-initrd-3.16.0-4-686-pae: false
  linux-image-3.16.0-4-686-pae/prerm/removing-running-kernel-3.16.0-4-686-pae: true


Reply to: